Related
How to Root the MyTouch Slide
v1.0 Brandt DeLorenzo 7/19/2010
(I tried to add links, but I couldn't because I was still a newbie on the forum...oh well)
Required Hardware
Windows, Linux, or Mac Computer
USB Cable
T-Mobile MyTouch Slide with SD card
Required Computer Software
ADB Drivers for your computer
The Android SDK
Command Line editor
Required Files
Root.zip
MyTouch Slide Rom(s)
Optional Apps
Rom Manager (by ClockWorkMod)
Any backup app from the market (like MyBackUp Pro)
Step 1: Install Required Software on the Computer
I. In order for your device to communicate with the computer, you will need the proper ADB drivers. ADB Drivers should install automatically when you attach your MyTouch Slide to your computer when using a PC. If you need to manually install the drivers for a PC, locate and install the HTC Sync Update program on your computer.
II. On the device, go to Settings > Application > Development and turn on USB Debugging.
III. Download the Android SDK and unzip the directory in your C: drive somewhere where you can easily find it. I’d also suggest renaming the SDK folder from android-sdk-windows to something shorter, like “asdk”. You do not need to install anything inside that SDK folder after you unzip it. Just move it to the C: directory and rename the folder to something short and easy to type, like “asdk”.
IV. You need to add the Android SDK Tool folder to your system path if you’re using a Windows PC. Go to Control Panel > System > Advanced > Environment Variables > In System Variables, highlight "Path" and click Edit. Add C:\asdk\tools to the end of the string. Be sure there is a semi-colon between the last entry and C:\androidsdk\tools. For example, it might look like this:
C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\asdk\tools
Then click OK on all of the windows and you're done with this step
V. Be sure that you have a working command line editor for your computer. For example, Windows users can go to Start > Run > (type CMD) > OK.
Step 2: Download and Move Some Files
I. Download the Root.zip file from Eugene's thread about rooting the Slide, unzip the contents (update.zip, ota.zip, and loop) and place them all in the C:/asdk/tools folder. This zip file contains all of the files that will unlock your MyTouch Slide and install the Recovery software to make everything easier in the future.
II. Find the MyTouch Slide Rom that you want to install. You may download as many as you want if you plan on switching between different versions of Android. You can find many of those Roms here or on AndroidSPIN. Download them to your computer and then move them to your SD card. They should be anywhere from 50MB to 150MB each.
Step 3: Preparing for Root
I. Before we begin the process, we need to test ADB to make sure your device can be seen by the computer. Connect your MyTouch Slide (it should be on right now) to your computer via the USB cable. Open up your command line editor and get to the Android SDK tools folder. If you named your SDK folder ‘asdk’, then you would type CD C:/asdk/tools and hit enter. You should see the prompt change from C:/ to C:/asdk/tools>. Type loop and hit enter.
II. If ADB is working, you will see a continuous loop of commands running up the screen. Hold down Ctrl+C to temporarily stop the loop and look for something that says:
List of Devices Attached
HT05RPS02484 Online
If you see something like this, type Y and hit enter. (Your device number may be different than display above)
If ADB is not working, go here to troubleshoot ADB and make sure that you can get the loop to detect your device before you go any further.
III. Perform a backup of any applications or data that you would like to restore. I’d suggest backing up applications, contacts, or any data that may not sync back to your device. You can find an application in the Android Market to complete these tasks. I prefer MyBackUp Pro.
*Mac and Linux users may need to put a ./ in front of anything that is typed in the command line. Like ./loop instead of loop.
Step 4: Beginning the Root Process
I. Power off your device. Hold the Volume Down Key and Press the Power button at the same time. Hold both buttons until the screen comes up in Bootloader mode.
II. In your command line editor, be sure that you are in the C:/asdk/tools> prompt. Type loop and then hit enter. You should see:
List of Devices Attached
HT05RPS02484 Offline
III. Select Recovery from the menu. Use the volume buttons to move up and down. Use the Power button to select the option. You should now see a dark screen with a black device and a red triangle with an exclamation point inside. Hold the Volume Up button and press the Power button. You should now see the Android system recovery (2e) screen.
If you kept the loop running, it should change to say:
List of Devices Attached
HT05RPS02484 Recovery
If it doesn’t change, unplug the USB cable from the device and plug it back in.
If your device number and “Recovery” appears, you can now stop the loop with Ctrl+C. If you do not see your device number and “Recovery”, you need to power off your device and try again. This may take a few tries.
IV. On the device, scroll down to Update.zip and select it using the Power button. It will display an error message that it failed. This should be expected and is part of the process.
V. In the command line editor, you should still be in the C:/asdk/tools> prompt. Type adb push ota.zip /sdcard/update.zip and hit enter.
VI. This is the most difficult part of the process. Type adb push update.zip /sdcard into the command line editor, but do not click enter yet.
VII. On the device, scroll down to Apply sdcard:update.zip and as soon as you select it with the Power button, click enter in the command line editor on your computer. The process should be all done within a second. If you did this properly, a new window in green text should appear with the title “Clockword Mod Recovery v2.5.0.1” or another version number.
VIII. Now you are in Clockwork Mod Recovery. First, scroll down to the partitions menu and make sure it does not say ‘mount system’. If it does say ‘mount system’, highlight it and hit the Power button to mount it.
IX. Scroll down to apply sdcard:update.zip and click the Power button to select it.
X. Power down the device. Follow the steps to get back into ClockWorkMod Recovery, but you won’t need to complete step VII. Simply select Apply sdcard:update.zip and hit the Power button to get back into ClockWorkMod Recovery in the future. (If a blank screen appears when you hit the Power button, press the Trackpad as the enter button.)
XI. On the computer, you should run the loop command to determine if the device is connected again. If it is, type adb install superuser.apk and hit enter. You have full root access.
Step 5: Installing a Rom
I. If you have already performed a backup of your files, you can now wipe the device from the ClockWorkMod screen. Scroll down to wipe data/factory reset and hit the Power button. You will be prompted with another screen with a Yes – delete all user data prompt. Select Yes – delete all user data and hit the Power button.
II. After the wipe has completed, scroll to install zip from sdcard and hit the Power button. Then scroll to choose zip from sdcard and hit the Power button. Now locate the Rom you want to install. Press the Power button to select the Rom and install it.
Managing your Roms
To make your life easy, download and install the Rom Manager application by ClockWorkMod. From this application, you can backup & restore your Roms, reboot into recovery with one click, partition your drives, and find new supported Roms for your device.
we already have a root and a simple root if a noob cant get root with either one they dont need root this thread is unnecessary and ,imo, more confusing especially w/o links
i agree, we've already got this pretty much in 2 different threads, in 2 different ways, one fully automated and the other manual. and i created a video and a tut that has more detail as far as how to install roms and such.. this is an unneccessary thread
Sorry man :/
where is my blow torch...prepare to flame
There is also ....
There is also a questionable step.
I cant get into Clockwork mod using the start update from the phone then push update.zip.
But if I adb push first, wait for the server to start, then updat from the power button on the phone, it works.
good luck.
nice guide! thanks
HighRidas said:
we already have a root and a simple root if a noob cant get root with either one they dont need root this thread is unnecessary and ,imo, more confusing especially w/o links
Click to expand...
Click to collapse
No offense, but I've tried many of the guides and they were difficult to follow when ADB was acting dumb on my laptop. The actual steps are easy, troubleshooting ADB on a Windows PC is a pain for most. Now that I have root and I'm using different roms, it's all easy and painless.
If there wasn't a no-linking rule on new user threads, it would have been much better...I agree.
between the fact that it doesn't need to be any easier, and the ROM bibke holds most of this, there is no need for this thread, i understand that you were probably trying tobe helpful but you are an idiot and made a perfectly useless thread with no links for no reason
tubaking182 said:
between the fact that it doesn't need to be any easier, and the ROM bibke holds most of this, there is no need for this thread, i understand that you were probably trying tobe helpful but you are an idiot and made a perfectly useless thread with no links for no reason
Click to expand...
Click to collapse
calm down bro !!! since i came to the slide side all i see is u going hard on people .. that ****'s not cool at all !!! it makes me wonder about u !!!
everybody got their pitch forks and torches out !!! just closed the thread that simple !!!!
i am helpful when stuff i posted in the correct forum, and when it is a new thread that has not been posted in th past. when people continuously post new threads to state stuff that has already been said, especially since without links this thread is pointless, then we xda devs are going to get upset, devs do not like to see pointless threads in the dev section, and certainly don't like it when people try to belittle the work that went into root by "making it easy" first requirement for having root is to know how to use a computer, after that you can learn to do some really cool stuff
Well I thought this guide WAS Helpful to be honest! Not to mention lesstalk was just trying to help. Tubaking is always busting peoples chops everytime he says something it ends up being rude! If you dont have anything nice to say then go to a diff thread dude cause your sorry azz attitude just makes it so people dont want to post cause their scared of getting verbally bashed by folks like you! Being rude is NOT doing anyone any good and Im sure im not the only one who feels this way about you!
in my opinion they should be afraid to post, if they aren't then they make crap like this. i stated that he was trying to be helpful but without links this thread just takes up space and makes people ave to search harder to root thier phone. i am a nice person IRL, but i do not like wasted space. if someone has come up with a "easier" way to root then fine, but there is already a thread for preparing to root your slide, two threads on rooting your slide, and the slide rom bible which includes all of those threads, a stickie should be more than enough for most people and if not then they need to think before hitting that new thread button. there is no need for repetitive threads in the developement section. if there had been links in this thread(which i know he can't do as he is a new member) then it would have been fine and i would have shut up and left it alone, but right now there are two ways to root, one for computer people and one for script kiddies, either way if you can't get it to work with either method then you probably don't need root. if you can't read the simple walkthroughs then you don't need root, if you don't know what you are doing then you don't need root
EDIT: Here is the link to the thread that already covers all of this, and guess where i found it
http://forum.xda-developers.com/showthread.php?t=708522
I did find this thread helpful, especially since i'm new to android. I want to know what i'm doing and the only way i can learn what i'm doing is from reading many posts and lots of trial and error.
I have read both of the rooting guides from the rom bible, and there is still some stuff left out. I actually like this guide better than the others because there is more help in the whole ADB part of the root process.
Now, i know what i'm doing with computers, it still freaks me out how much i can do with computers. But in new areas where i want to learn, it helps to have more info than needed because people have different viewpoints on the same process.
@tubaking182 - for most of the threads you come in bashing in the dev section, i agree with you. But on this thread, i think you're way out of line. Yes there are 2 threads already and yes this thread needs links. But it's not a waste of space. I've lurked on xda since i bought and returned my HD2 (~late april). And when the slide was released, i headed to this subsection. And i've only seen it go down hill with more people posting threads that needn't be posted, but also with "wanna-be" mods flaming the person who didn't think and posted the needless thread.
But now that animosity has taken a turn for the worst and i only seen bashing in this section of the slide section of xda. And it's really making me want to leave xda.
The whole rooting process can be easy to learn if you've come from a previous android phone and have previously used ADB commands. But when you're really lost about even the whole linux folder structure (i'm not totally lost with this, but i'm more used to the desktop linux folder structure), then some of the guides out there to do certain tasks seem like another language.
3 guides for the rooting process can't hurt, especially when someone who doesn't know what's going on in the process wants to figure it out step by step and is too afraid of members like tubaking182 are always going on about searching for previous posts and flaming for simple questions (not that people shouldn't search for previous posts and threads).
EDIT: i do commend all the devs for their hard work making anything like rooting the phone remotely possible.
tething is, when you want to post an issue about something you saw in another thread, the issue should be posted there, it will be answered when people see it or when the OP has time to get on and answer. i am not trying to be a "wanna-be" MOD as i don't ned to be on XDA any more than i already am regulating posts and mergng threads when they should be merged, this thread holds ZERO new info and therefore should not be posted. if this member found a simple one-click root(which i hope to god never happens with this phone) and he wanted to tell us about it and tell us what he searched to find it and whatever else then great i ould not care, but some things do not need a new thread, if users all searched the Q&A section, the General section, and the Dev section BEFORE clicking the new thread link at the top then we would probably have half as many pages in the dev section, we have 8 pages now that i have gone through in the dev section and i have seen way too many repeat threads and questions. if you wanna see who i am take a look through my posts, i am a very helpful person when people want HELP, but when people want ANSWERS and they want stuff easier and they post in the wrong section then i get irritated and my messages are less helpful.
the number one reason n00bs post in here is because more people will see it, unfortunately this means the devs have to deal with the BS threads that push their stuff to page 3-4 and most people don't read past page two to look for a thread
yes, but you have to remember this is a very publicized and a public forum. In another forum i belong to, this happens all the time even though we have clearly marked stickies in every section.
I bet you most of the pointless threads have the OP posting only once and never even commenting on the posts made after they got the answer. That is what happens when you have a forum that's known for phone customization (or any public forum for that matter).
EDIT: and i'm not saying you're mean, i'm just saying it's going a little too far.
EDIT 2: if someone makes a thread only looking for answers that have been previously posted, just don't respond to it as that person won't ever be back. it's as simple as that.
@lesstalk - Thanks for the guide, outside of the lack of links(out of your control) this is a wonderful guide that I have started pointing new MTS users to.
@tubaking182 - Fact is, the guide on this actual covers steps that were skipped over in the other root guides because they were assumed to be common knowledge. Its that assumption which will kill future android users desire to learn about the device, especially when its accompanied by such a poor attitude from the "regulars" of the forum.
Outside of the links being missing due to being a new user account on the forum, the guide was more complete and comprehensive than any of the other guides so far. It managed to cover step(s) that are easily overlooked by someone who has rooted other android phones before, but CRITICAL to function and not mentioned in the other guides. I cant count the number of people I pointed to the pre-existing threads on rooting for MTS, who completely missed the superuser.apk setup because there were not any steps written for it.
A well educated userbase is a happy and quieter userbase, and while there are alot of useless threads in this section, this one actually served a purpose.
^^^
Here here!!
This is the first guide that has explained it all, and now I feel like I can do it too. I've done my g1, and tons of wm phones, but this one is completely different. All depends on your background.
You should be trying to expand and diversify the user base, not alienate it. or would you rather lock up the keys and argue with your self all day?
Sent from my T-Mobile myTouch 3G Slide using XDA App
I agree that this guide might Hold your Hand & even ( Might have missed steps ).
It's not my Job, nor any others person job to make sure you have your driver's setup & adb working correctly. There is plenty of other threads that already cover this, easy to find by using Google..
regardless, Thank you to the OP for try to help make things a bit clearer
~Eugene
tubaking182 said:
i am helpful when stuff i posted in the correct forum, and when it is a new thread that has not been posted in th past. when people continuously post new threads to state stuff that has already been said, especially since without links this thread is pointless, then we xda devs are going to get upset, devs do not like to see pointless threads in the dev section, and certainly don't like it when people try to belittle the work that went into root by "making it easy" first requirement for having root is to know how to use a computer, after that you can learn to do some really cool stuff
Click to expand...
Click to collapse
i feel u on that u do have a point !!! some people just that "dumb" and can't help it. they should post in the right thread but at the same time just putting them down isn't always the best way !!
dcowboys2184 said:
i feel u on that u do have a point !!! some people just that "dumb" and can't help it. they should post in the right thread but at the same time just putting them down isn't always the best way !!
Click to expand...
Click to collapse
Ditto. This is a redundant and unnecessary post. There are more than four different guides and several other posts on preparation. Yes, they aren't written for a kindergartner, but rooting your phone isn't supposed to be easy. Do some research, read a post or several, and only post after your eyes start to bleed. Cluttering the forum makes it even harder for new members to the community.
Help I tried installing android on my Hd2 i followed the steps of extracting it to my SD card then I hit clrcad (misspelled I know) and then i hit haret and it goes to the linux boot screen after that it loads but then it freezes and says extract rootrs or something so I believe mad a mistake somwhere...
I would really like to know what im doing wrong thanks
jassonss17 said:
I would really like to know what im doing wrong thanks
Click to expand...
Click to collapse
Well to begin with you're posting a "Android" question in the standard HD2 questions forum when we have a specific "Android Q&A" forum.
Also you obviously haven't even attempted to read any "stickies" or "guides" because if you did you would know that you need a minium radio version to run android and also that you need to make sure your card is properly formatted etc. Because you didnt even mention any of this its obvious you have just jumped into a build topic and though hey that sounds cool lets extract, you then failed at booting the build and though Icant be bothered to take 5 mins and do a bit of reading Il just post that I failed and hopefully somebody wil write a step by step guide for me even though they ALREADY exists.
So to summarise..
a) Go read the guides
b) Read them again.
c) Search or look at the questions that already exist
d) If you cant find your answer ask in the correct place.
TO GET TO THE POINT, AND TO AVOID MY *****ING, SCROLL DOWN
OK, imma recent migrating bird from the sinking WinMo ship.
Just got this phone from LG, nice phone, but the flashing guides here aren't so easy to understand
I'll quote a 6 line instruction from the Prime/Megatron ROM thread which is
http://forum.xda-developers.com/showthread.php?t=870640
How to flash:
First, reboot into recovery via 3-button-combo, ADB, terminal, w/e.
Partition SDcard (swap: 0, ext: 512), ext2-ext3, then ext3-ext4 it.
Wipe data (data,cache,dalvik-cache,ext).
Connect the device to PC, copy Megatron over to the SDcard, disconnect.
Flash it via "flash zip from sdcard"
Reboot
Read important notes below
That's it.
Click to expand...
Click to collapse
SERIOUS? THATS IT???????????
I have no idea what all that means, and so are millions of sad puppies who migrates from WinMo's or dreaded Dumb Phones like the ones they sell in 7-11
SO, the point is (you can stop scrolling now)
PLEASE PLEASE PLLLEEEEAAASE make a easy guide for flashing, possibily a video. Or you could make it easy enough for me to understand, and ill make the guide.
BTW, in the long term, it WILL educate FURTHER n00bs.
Thanks in advance. Sorry for the *****ing. Love u guys
OK, OK, OK, you have got me!! I will prepare some "dictionary" for all noobs. Maybe it will sounds crazy, but when I logged-in I had no idea what android is. OO is my first android phone. I have got everythink from whole this forum, but I was there since thread about P500 started so it wasn't too hard catch and read every post here. So, all informations are there, but sometimes is not possible find them.
So i just have to read everything? Optimus One Android Dev or General?
Great! Thanks a lot
But gonna go to sleep.. I'm sorry lol this is my last week of winter break and its midnight. Bye!
dongimin2 said:
So i just have to read everything? Optimus One Android Dev or General?
Click to expand...
Click to collapse
About 95% of posts it will be useless because there are also some question, helps, and another stuff. There is too much words and useless trash. You also need know basics of unix-like systems to understand what are guys (and you) trying to do in adb shell, what is root and for what it is, what # mean in command line, and so on.
custom ROM is mainly for experienced user. At least, experienced in unix-like system, because android is based on it. Tools like busybox bringing next tools known from unix and some programs needs it for running. And another and another words and name what is normal for advanced user, not for n00bs here.
Because that all stuff it takes some time that I will have some usable noob dictionary.
This is a good and pretty much complete guide.
forum.androidcentral.com/lg-optimus-s-roms-hacks/48543-idiots-guide-rooting-custom-roms-optimus-s-edition.html
Rooting is the same, you just have to change some commands for the custom recovery but once you get there you'll know. And I recommend rooting via Adb, its easier for later.
btw, don't know if its a problem posting the link, if it is, sorry.
One thread is enough!
Do not do this again or you will have an infraction for spam.
Cheers
***UPDATE***
I am removing this tutorial from general public view. if you read the warnings/disclaimers and are still interested you will need to read the links below and go about it yourself.
--------------------------------------------------------------------------------------
first off credit for this idea go to all the people/sites linked below. IF credit is missing where due please notify me and i will resolve. This is just a gathering of other posts and steps that worked for me.
This will wipe your device. backup anything and everything before proceeding.
If you are not willing to take it upon yourself to research any problems that arrise and fix them yourself DO NOT ATTEMPT.
If you are unwilling to wipe your stock Firmware DO NOT ATTEMPT.
If you are unwilling to start with a fresh nookie color SDcard NO NOT ATTEMPT.
If you are unable to fix your problems or want to revert to stock you can do so following the link at the bottom of the page
This is for advanced users. Make sure you read and reread everything before attempting anything! I take no responsibility and offer no promise of support if you make yourself a $250 B&N brand paperweight. keep in mind the nc is hard to brick (know from experience) but anything can happen, so be warned and proceed with caution.
if something below is not clear visit the links provided and look for your answers there. they are there and the more you read and learn the more sense this will make. if you are still unable to find help post here and i will try to get you going.
now on to the good stuff. I just wanted to gather the various posts and links that i used to gt a fully working froyo running on my nc from the internal memory (emmc) and present them in a step by step guide for others wanting to run NF from their internal memory and have no need for B&N stock. Flash is working if you install the proper apk. this is not installed out of the box. After installing to your EMMC you will be able to use any sdcard as you normally would in android. I am using a 16gb card with no problems.
***steps removed... see top of post***
helpful links:
http://forum.xda-developers.com/showpost.php?p=10254900&postcount=138
http://forum.xda-developers.com/showpost.php?p=10747294&postcount=2
nookdevs steps for creating nookie froyo sdcard:
http://nookdevs.com/Nookie_FroYo:_Burning_a_bootable_SD_card
nookie froyo thread:
http://forum.xda-developers.com/showthread.php?t=883175
nookdevs nookie froyo tips:
http://nookdevs.com/NookColor:_Nookie_Froyo_Tips
wipe nc to stock: (download the images and run the commands from an adb shell.)
http://forum.xda-developers.com/showthread.php?t=919353
Flash back to clean stock ROM (nook devs) http://nookdevs.com/Flash_back_to_clean_stock_ROM
1. first you will want a fresh NF sd card. I tried to use my seasoned nf card and ended with a brick... if you have google apps installed you will not be able to get past the android screen and will have to reimage as stated above. create your fresh nf sdcard following the steps at nookdevs here
Click to expand...
Click to collapse
As we say in french, you must call a cat a cat. Your NC wasn't bricked at all. You simply needed to touch each corner of the screen one at a time when on "touch the android" screen, starting with the top left corner, then clockwise.
Would have saved you some time
If I were you (if I may..), I'd put all the links the bottom of the post. Would make reading easier. As for my code to copy sdcard content, go on and post it directly. Opening multiple pages only makes things more complicated. No problem. As for the Volume keys and gapps, it could be ambiguous, those add-ins aren't required at all. Simple leave a link to nookie tips on nook devs for those who want it?
But of course, this is your post..
Sam
samuelhalff said:
As we say in french, you must call a cat a cat. Your NC wasn't bricked at all. You simply needed to touch each corner of the screen one at a time when on "touch the android" screen, starting with the top left corner, then clockwise.
Would have saved you some time
If I were you (if I may..), I'd put all the links the bottom of the post. Would make reading easier. As for my code to copy sdcard content, go on and post it directly. Opening multiple pages only makes things more complicated. No problem. As for the Volume keys and gapps, it could be ambiguous, those add-ins aren't required at all. Simple leave a link to nookie tips on nook devs for those who want it?
But of course, this is your post..
Sam
Click to expand...
Click to collapse
I tried the touching four corners. no go. several roms required that back when i was using a D1... I couldnt for the life of me figure it out so just scrapped and started from scratch.
thanks for your input. i planned to clean this up a bit, was just in a rush writing the original. Thanks again for your help. couldnt have gotten this far without your steps to start off.
Eager to try this out ... but will it be able to see a non-NF SD card I enter in? Will it recognize it, and let me see it as mass storage when the Nook is plugged into my PC?
Very well written, just copy and paste the code into the console for the most part ... Runs nice and fast, I have a few FC's to clean up but that is due to me not factory resetting the NC prior to doing this as I am an impatient person! I must say it is very nice not to have the B&N notification bar at the bottom of the screen.
So if this is really 2.2, does it have flash?
theyownus said:
I used 0.5.9 and replaced the vold file with the one from 0.5.8 making sure to maintain executable permissions.
Click to expand...
Click to collapse
a) What vold file? Searching for "0.5.8 vold" on this board produces no hits.
b) Executable permissions on what? This "vold" file or something else?
Don't want to be "that guy" but date should read 1/20/2011.
Thanks gonna give this a shot.
What happens to the Media partition?
Also, slightly random: Why doesn't adb ever seem to work over USB with my Nook Color? 2.1 ROM, Nookie Froyo on SD 0.5.8 or 0.5.9, it never sees a device. By contrast, it works fine on my G2.
starkruzr said:
Also, slightly random: Why doesn't adb ever seem to work over USB with my Nook Color? 2.1 ROM, Nookie Froyo on SD 0.5.8 or 0.5.9, it never sees a device. By contrast, it works fine on my G2.
Click to expand...
Click to collapse
Re-run ADB configuration. Make sure id is 0x2080.
How do we fix the SD card error. I am unable to do anything with the SD card.
samuelhalff said:
Re-run ADB configuration. Make sure id is 0x2080.
Click to expand...
Click to collapse
Wow. This is INSANELY important and this is the first time I've ever seen mention of it. Every other post simply assumes your ADB "just works." I have been endlessly frustrated by the lack of working ADB on this thing such that every time I do something with my NC I have to find a way to first install ADBWireless.
http://fineoils.blogspot.com/2010/11/pokey9000-has-got-self-booting-image.html
The instructions to get it working are in here, folks. Can these instructions be put in a sticky somewhere? This is about the least-obvious thing I can think of.
Is there any improvement in speed and reliability running this from the emmc as opposed to a class 6 uSD?
"extract them to their respective folders"
Nothin but bootloop
theyownus said:
first off credit for this idea go to samuelhalff
links:
original steps from samuelhalff http://forum.xda-developers.com/showpost.php?p=10747294&postcount=2
Click to expand...
Click to collapse
What a great idea. If only someone had talked about this weeks ago... Anyway now that it seems people are going to be trashing their nooks trying to do this, it's probably simpler for one to just boot into SD and...
[Replace the files in /system]
It would also be a good idea to clear out /data and /cache or there will likely be bootloops when froyo boots with the old data stuff still around.
That's off the top of my head and totally untested. Seriously. It probably doesn't work, and is totally unrecommended. Anyone who types "rm -rf *" in their emmc system is saying goodbye to their stock OS and will have to live with their decision. All GPL disclaimers apply.
Note also that IOMonster has a nice bootable clockwork SDcard that does all kinds of things, and automating this type of migration is only a matter of time now.
Update: Actually the steps aren't THAT different. /just sayin'.
fattire said:
What a great idea. If only someone had talked about this weeks ago... Anyway now that it seems people are going to be trashing their nooks trying to do this, it's probably simpler for one to just boot into SD and...
Somewhere in there it would be a good idea to clear out /data and /cache or there will likely be bootloops when froyo boots with the old data stuff still around.
That's off the top of my head and totally untested. Seriously. It probably doesn't work, and is totally unrecommended. Anyone who types "rm -rf *" in their emmc system is saying goodbye to their stock OS and will have to live with their decision. All GPL disclaimers apply.
Note also that IOMonster has a nice bootable clockwork SDcard that does all kinds of things, and automating this type of migration is only a matter of time now.
Update: Actually the steps aren't THAT different. /just sayin'.
Click to expand...
Click to collapse
I had the same reaction reading the post. Not only is it unfair to you, because I have read your post before attempting anything, but it's also unfair to me because it suggest that he did most of the practical work..
Anyway does it really matter? People who don't regularly read the forum often don't give a Jack of who's responsible for what. Those who do willl know you were first in line. Anyway, I understand your frustration I should have said something. I was just fed up. Sorry.
Please know that my original post recomanded doing dd's of all partition. That way reverting back to stock was easy. My post also mentionned emptying data.....
What do mean steps aren't that different?
Sent from my HTC Desire using XDA App
samuelhalff said:
I had the same reaction reading the post. Not only is it unfair to you, because I have read your post before attempting anything, but it's also unfair to me because it suggest that he did most the practical work..
Anyway does it really matter? People who don't regularly read the forum often don't give a Jack of who's responsible for what. Those who do willl know you were first in line. Anyway, I understand your frustration I should have said something. I was just fed up. Sorry.
What do mean steps aren't that different?
Click to expand...
Click to collapse
Ah, I just mean it's all the same idea-- out with the old, in with the new. Nothing particularly genius about it. In any event, it's not really a matter of credit. We all stand on the shoulders of giants. I was just amused is all... so let's just have fun, eat, drink, be merry, and dance in the rain.
It may turnout that English isn't the OP's native language. Although it isn't mine either..
Nothing really seems genius once you get to understanding it.. but as a newcomer, I still had a bit of trouble getting the sdcard to mount..
Sent from my HTC Desire using XDA App
So I've been doing this android flashing business a long time
And I've got a real mess on my hands. I'll be ****ing with this for the rest of the night! Thanks!
Hi.
I was looking for this and opened a thread to propose having an option to fix the data partition size. The thread gone in another direction, and I don't have an answer, and it looks like it's not followed anymore by the person who asked me a question about what seemed looking like a problem to him.
Here I go with another post, but with a direct question, instead of a feature ask : the one in the title.
I have a big usb 3.0 key, I need it as a data storage, but need to test some things with remixOS without buying a new one. to have enough storage space. I imagine I won't be the only one to be in this case of not wanting to invest more than necessary in unnecessary duplicate material. So please could someone guide me or provide some guide to enlarge the remixOS data partition without disabling the os to launch ? It appears I'm totally not competent to do this.
@Esdeve
..head to this link http://support.jide.com/hc/en-us/categories/202520967-Remix-OS-for-PC then on the top LEFT select "using RemixOS for PC" then on the loaded SUBMENUS select "how to increase the memory size?"
you will find your answers there!
NOTE:
keep in mind that you need to reserve ~3GB on your portable drive for successful OTA-update....
Great !
Didn't find that. I thought as well I was said, that I'll have to use linux to perform this task when the solution is known, possible from the live, and already given.
Thanks a lot.
it doesnt seem possible to select RemixOS in the grub menu until i press enter. Choosing it only with cersor doesnt start. So after i press enter then edit the command with 'e' , add DEBUG=1. ctrl+x doesnt bring anything so boot up system and nothing was changed.
Rebboted to face 'error line 15' nothing could do to get away (I dont know how to use linux commands as a windows user)
When i see this i know the installation is gone away(for me)
Then only way i have find to solve it is boot in windows, run chkdsk which i dont know why is solving the issue and i am able to boot again with no problem in remix .
Any suggestion would be very much apriciated!
So, for you guys that don't seem to be able to do cd /mnt/RemixOS, it has been reordered to just /mnt. So, the data.img file (data partition) is no longer in /mnt/RemixOS, but in /mnt.