hi guys,
I tried the lasers unlock method with the guide of lukas, but unfortunately without any succes. i got always the error " adb server didn´t ACK".
many adb.exe´s appeared in the task manager, could that be the problem? I also tried to kill them, but they kept appearing and appearing and after a while the batch file finished unsuccessfully
So I tried the unlock feature of the flashtool, but somehow my device isn´t being recognized in flash mode.
the message " waiting for device" doesn´t disappear after I have plugged in my x10 in flash mode.
my setup:
wb 6s 2.3.3
stock kernel
windows xp 32 bit
thank you guys in advance.
I found a solution on my own :http://forum.xda-developers.com/showpost.php?p=17437673&postcount=179
I´m a little bit emberrased now, I should´ve searched more properly.
wish me look
Related
Hello there!
I've been trying to install a custom rom to my sk17i running 4.1.B.0.587, I'm also using Windows 8 64 bit.
I first follow this http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 initially as it seems that it's a complete guide. But in that thread, I was unable to unlock the bootloader as the command is not letting me run the fastboot.exe -i 0x0fce getvar version / fastboot device etc.
So I end up trying this thread http://www.androidgadgematic.com/2012/11/how-to-unlock-any-sony-xperia-bootloader-easily.html
Which I able to run those commands ( fastboot.exe.... etc ) but when I run this command to unlock the bootloader ( fastboot.exe -i 0x0fce oem unlock.. ) I got an error " failed remote oem unlock " so I double checked the IMEI and got new bootloader key. Then I tried again, I got an error this time " too many links ". As per other thread, they advised to clear cache ( fastboot clear cache ) but it doesn't made any difference.
After too many trials, I decided to use this http://forum.xda-developers.com/showthread.php?t=1879982 (using flashtool and flashmode) I was able to get 14% when the LED light on my xperia gone. Then what I did was I reconnected the cable then proceeded with flashtool method.
At this point, when I rerun flashtool, it's stock at 2% with checking headlines. Goes about more than 10mins on that phase so I decided to reconnect it. Then my computer crashed, so I have to restart. When I turned my computer on, It loaded for 5 mins then I got a pop up message, "upgrading android" afterwards, other programs loaded but then at the end, I got another error saying " Unfortunately, startup programs stopped..." then it restarts itself continuously that I have to remove the battery to completely turn it off.
I assumed that my phone is now "bricked" that is why i follow this "6. Turning the "brick" into a smartphone" http://forum.xda-developers.com/showthread.php?p=27376017 but it didn't worked. same as the last time I used the flashtools.
Can I still revive my phone? I just want to downgrade it back to GB 2.3 or upgrade it to CM10 JB if possible.
I'm definitely stupid and noob in this field. Can someone help me out for this one? It'll be highly appreciated! Many thanks!
*Drivers are successfully installed.
*downloaded kernels.
*Windows 8 64 bit
I'm on the point of losing hope that I could still use it. =((((
Give this a read - http://www.androidgadgematic.com/2012/06/how-to-fix-bricked-sony-xperia-android.html
Many thanks! I'll give it a try. hope it works. =)):fingers-crossed:
**by the way, I can't see the xperia mini pro component when I try to install the flashtool driver. what component shall I choose?Please advise.Thanks!
Cant find any threads about this. So confusing.
nejakkin said:
Cant find any threads about this.
Click to expand...
Click to collapse
See the general section, everything has been covered before so finding it should be easy.
All right, I have a question... I have tried a root method for Alcatel OT-918 from your forums, and it worked... but after some time, I turned my phone off and then it would suddenly go to Android screen and restart itself and then go to Android startup screen and do the same, it caught in a loop, although it had worked for weeks after I rooted in... anyway... I sent it to repair service and they said that only thing they did is upgraded software as suggested by manufacturer. Now when I try to root my phone using FlashTool and a given scatter file for my android I simply can not, it says "Can not find USB port." Although I have all the drivers installed and everything is working properly... nevertheless, when I tried to install alternative usb_driver, I got an error saying "no device tree"... Anyway, I really need a solution and find out why is this happening...
Hi All,
I have a phone that looks like a Samsung S4, but is in fact a Mediatek MT-6572.
As the installed software did not allow me to open lots of apps, I decided to give rooting and reflashing a go.
I managed to root the device, had super SU installed and then tried to find a ROM that worked.
In that process I managed to (accidentally) format the bootloader.
At present the phone is only being recognised by SP Flashtool (as an MT-6572).
I can do a format, no problem.
I can start the flashing, but always get some sort of error.
At first it was the NAND vs Emmc error, so I tried to find a working NAND ROM.
The ones I did find on the net also resulted in some sort of error.
I had both a BROM error and the "PMT changed for the ROM" error.
I have been using the SP flashtool 5.1628.
Any suggestions anyone?
Hello guys!
I've been trying and reading as much as possible and I haven't been able to bring my Viyo 5 Mini back to life, using SP FLASH TOOL, I have installed the drivers many times and in many different ways but nothing.
After a while looking up I found somwhere somebody said to deactivate the antivirus, I did it and it worked out but my phone ended up without IMEI and with the NVRAM error, so as it worked ONCE I tried to install a recovery to root it and fix these problems, but I got it bricked again, I tought I could rescue it again but after this it doesnn't work, the pc does the sound when I plug the phone but the SP Flash Tool does not start.
I install the drivers and they appear on Device Manager but they have the code 10 error saying the devices cant't start, only ONE works, the one that says Preload.
please someone help me I'm going crazy, I'm not very good at this but I used to handle it very well, it's this phone that is giving me trouble.
my pc it's on 64 bit and win 8, in case that info matters a lot, I have also tried running the SP Flash tool on XP (SP3) commpability
I have been switching the driver of the only device that seems to work to the others to see but still nothing.
thanks in advance for any help
the phone version again is Blu Vivo 5 Mini V050Q
Hello guys! I have a problem with one phone that i am trying to fix for someone and I feel sooo, sooo completely lost in all of this as I know almost nothing about this. The cell phone model that is in question is Alcatel One Touch Pop C3-4033x.
It seems to be using a Mediatek chipset and I was reading some of your advices here & there and tried using the program called SP FlashTools but it always resulted in error, in the end. It seems that something is wrong with this phones emmc flash memory. So, I tried transfering some files as a zip files to the SD-card and tried to apply update from it, but it said always: Installation aborted. And then, I have tried looking for a way to flash stock firmware of that specific Alcatel model on SD-card, but I just don't have any clue how to do it, if it is possible, even. Maybe I should just give up trying?
Oh, I almost forgot to write that the phone doesn't have the access to Android OS and USB debugging isn't turned on, because computer doesn't seem to list it and I don't know if there any button combinations that Alcatel uses for this model to get into that fastboot or adb mode, even though have installed mediatek drivers. It can only get into Android System Recovery 3e. That seems to be everything, I think, at least.
Oh guys, I am so, so, so sorry if I am bothering you with this. I just didn't know what or where else to ask this. Thank you sooo much!
Hi download those files:
Firmware:
https://www.mediafire.com/file/bpm4ibsbmr4q6nc/OT-4033X-Without_Mobilis_logo__BY_GSMSERVE.rar/file
SP Flash tool:
https://androidfilehost.com/?fid=11410963190603870440
Driver:
https://mega.nz/#!8VYkQCxD!fkhTrZwFFILDAglO1cR_8pIM4Cel52brZ7RB6QZoc6o
Once you downloaded all right driver open SP flash tool and add Scatter file
MT6572_Android_scatter.txt
Click on Download , connect your phone without battery and see if the process is going on if not try again with battery inside.
If you end up with error do the same thing but now first do Format then after is Finish do Download. Good luck ...
It still displays error :/
Teddy Lo said:
I have tried to do everything like you have said, but it still displays error when i press the Download button, and it displays that error after some seconds pass and also the same happens hen i try to use the Format function. This is the error it displays when i tried with the download button: BROM ERROR: S_DA_SDMMC_WRITE_FAILED (3149)
And this is the same error it displayed when i tried using the Format function: S_DA_SDMMC_WRITE_FAILED (3149)
i am so, so sorry for bothering with this.
Click to expand...
Click to collapse
Try with another version of SP Flash tool little bit newest .