I'm having an odd problem whenever I plug my galaxy tab in, it seems to fail to recognize it has the ability to transfer files between itself and my computer.
Both the computer and the tablet recognize that it is plugged in, however, their fails to be anything popping up on my computer showing the tablet as ready to transfer files.
I have installed the drivers on the tablet and nothing has changed, I can also use adb on the tablet through USB debugging, but still no file transfer!
Anyone have any ideas? (I'm running a P.C. with windows 7)
nothing is supposed to pop up, you just have to look for it in Computer
did you do that ?
uncheck USB debug too ?!
Johosophat said:
I'm having an odd problem whenever I plug my galaxy tab in, it seems to fail to recognize it has the ability to transfer files between itself and my computer.
Both the computer and the tablet recognize that it is plugged in, however, their fails to be anything popping up on my computer showing the tablet as ready to transfer files.
I have installed the drivers on the tablet and nothing has changed, I can also use adb on the tablet through USB debugging, but still no file transfer!
Anyone have any ideas? (I'm running a P.C. with windows 7)
Click to expand...
Click to collapse
Make sure USB Debugging is disabled, and then plug the tablet into the computer.
Hi all
Thanks to those who replied though it would be nice if the post was fully read first... for example, I cannot just connect the phone and copy its content via USB!
Here's the problem:
- phone screen is smashed and shows nothing
- phone still powers up though
- it is not rooted
- it has data on its internal memory that I want to copy
- it has pattern lock activated
- computer (MS Vista OS) recognises a USB devise is logged in, but it doesn't read it as a drive, and KIES just idles... no doubt because I would need to change the phone settings, which I can't do with a smashed screen.
QUESTIONS:
- How can I access phone contents to copy them? (repair shop wants $220)
- I was told using ADN....
I installed SDK Tools but how do I start ADN?
Many thanks
the easiest way might be connect to your computer and copy the contents of the internal sdcard if your computer sees the phone.
If you wan to use odin, use file dump to dump the contents of your phone i believe.
I'm quite the noob when it comes to adb scripting, but I believe that
- start a command line within the directory where ADB executable is located
- type in "adb usb" and it should connect to your phone
- then type "adb pull /mnt/sdcard/* X:\path-to-directory\"
commands without parentheses... I hope it will work
Thanks for the replies
I just amended my original post to say the computer does not recognise the phone when USB connected... KIES tries to connect but fails (no doubt because there is no response from the phone).
Did you try and connect it through mass storage?
Settings - Wireless and networks - USB utilities.
Also try uninstalling kies and reinstall
Sent from my ThinkPad Tablet using XDA App
mattyh77 the screen is broken, I can't see a thing on it so I can't changes settings from the phone...
ANYONE ELSE PLEASE?
E3Y said:
mattyh77 the screen is broken, I can't see a thing on it so I can't changes settings from the phone...
ANYONE ELSE PLEASE?
Click to expand...
Click to collapse
adb is it!
open a adb shell if you need to navigate around to where things are..
then do a adb pull to get the stuff you want.
Oh yeah, forgot about that, haha. Sorry.
Sent from my GT-I9100 using XDA App
Hello,
My vibrant got recently run over by a car and the screen doesn't work anymore However, I know that it still can function because I can see the 4 capacitive keys on the bottom light up when I touch them. Is there anyway for me to be able to view the Vibrant's harddrive on my computer without having to switch to USB mode (since my screen doesn't work)?
if you have adb installed and know some basic linux commands you can use ADB to view the contents of your vibrants storage via command prompt and should be able to copy most of your data over. As far as a graphical solution i think there was something being developed called screen cast at some point but i dont think that will be much use to you as i believe it has been abandoned
I am familiar with adb but I can't see my device for some reason when I connect my phone to my computer and run 'adb devices'. I've used adb in the past to push / pull files but I remember having to mount the device from the dropdown menu before it would be recognized. Is there any way to force the phone to be connected? Thank you for your help!
isyiwang said:
I am familiar with adb but I can't see my device for some reason when I connect my phone to my computer and run 'adb devices'. I've used adb in the past to push / pull files but I remember having to mount the device from the dropdown menu before it would be recognized. Is there any way to force the phone to be connected? Thank you for your help!
Click to expand...
Click to collapse
are you on a stock rom? ever since i started using custom roms ive always had ADB debugging enabled, unfortunately you may be SOL if you need to enable ADB debugging as both the adb method and screen cast require ADB to work,the other option is to take apart your vibrant and have the internal memory chip read that way tho your stand a good risk of damaging the internal memory chip
Hi, I have a Scroll Excel tablet and was recently trying to flash CMW5 onto it using a recovery from the scroll forums, however in the command prompt whenever I type in the command ("adb push install-recovery.sh /data/" in case that helps) it says the daemon isn't running, then it starts the daemon, then it says "Error: device not found.
I've checked everything, I have correctly navigated to the folder which holds the recovery, I am entering the recovery name correctly, I do have the Google USB Drivers etc.. installed, the device is plugged in (and the computer knows it is, it detects it) but the prompt doesn't recognize the device.
There is one thing though, whenever I plug it in the computer tells me the device is not recognized, but it at least acknowledges that the device is there. Am I missing any drivers on my tablet's side or what? Thanks
Also, I attached a file of what the prompt tells me below v
I do not have this tablet so I cannot give you an exact answer. However, I would try uninstalling and reinstalling the drivers and restarting your pc. Also try a different usb port.
As stated in the post above, I would check my Drivers. I would also suggest checking your USB Cable. Make sure that it is good. Is your SDK Tools up to date ? BTW that seems like an odd path for your platform-tools folder.
prboy1969 said:
As stated in the post above, I would check my Drivers. I would also suggest checking your USB Cable. Make sure that it is good. Is your SDK Tools up to date ? BTW that seems like an odd path for your platform-tools folder.
Click to expand...
Click to collapse
It can't be the USB cable, I've tried 2 or 3. Also, yes. I updated the SDK tools yesterday. And I know it's an odd path, but I'm a bit OCD about keeping things in folders.
However, about the drivers, the computer says it doesn't recognize the device. And when it scans for the drivers it doesn't find anything to download. Regardless, Storage Options are willing to take a look at it for me (how nice, even with a technically void warranty.) Thanks for your help anyway.
I would definitely recommend re-installing the drivers. Then try again.
TEAM MiK
MikROMs Since 3/13/11
--Edit--
This is finally solved. There was a problem with my computer's ADB RSA key, so I simply had to delete the key file and rerun ADB and I Received the RSA Key Fingerprint window instantly on my G3.
For the full description of the problem look here:
I'm having issues trying to root my phone. I'm using the ioroot method mentioned here.
I get to "* daemon started successfully *" then nothing. After a lot of troubleshooting I know it's because my phone won't allow access by my computer. I never receive the RSA Fingerprint window allowing my computer access to my phone. Here's what all I've tried:
-Put phone into Internet>Ethernet mode (and I've also tried Internet>Modem, MTP and Camera modes as well just to say I did).
-Enable Developer Options and enable USB Debugging.
-Installed the drivers linked in the ioroot page (I've also downloaded the drivers directly from LG - believe it or not ... it's the same file).
-Installed the Verizon Software Assistant from the phone after connecting to the computer.
-Updated my ADB version with the SDK Manager.
-Used different USB ports on my computer as well as two different USB cables (one of which came with the G3).
-Checked Device Manager, all is as it should be and no unrecognized devices.
When I ran the adb server without the ioroot batch file, typing "adb devices" would return my phone's serial followed by "offline." It did this until I updated ADB; then when typing "adb devices" it would return the serial followed by "unauthorized." I've tried all various methods and combinations of switching adb debugging on and off, switching developer options on and off, installing and uninstalling and reinstalling the LG drivers, unplugging and replugging the USB cable, power-cycling all devices including myself at night, doing these methods with long pauses in between (10 minutes to ensure I wasn't being impatient), scratching my head, drinking more coffee, switching to rum and swearing at all devices but nothing seems to make a difference.
What am I missing?
I've got the Verizon LG G3 in White (LG-VS985W)
Software version VS98510B
Windows laptop running Vista 32 bit (I know I know, "eeew Vista")
I was able to obtain root using a different computer, here's what I tried with my laptop after gaining root to get it and my G3 on speaking terms:
-Deleted the ADB_Keys file on the G3 (/data/misc/adb/adb_key): no change.
-Compared running Windows services between Vista and 8.1 and started services which were running on 8.1 but not vista: no change.
Here was the resolution:
There turned out to be a problem with my laptop's ADB RSA key. I'm assuming my G3 was rejecting a bad key and disallowing my laptop to connect to it via ADB.
ADB saves a key file in one of multiple places on a Windows computer, the first is in the location where adb.exe is (C:\android), the second is in the user's profile (C:\Users\*username*\.android), the third place is in the Windows system files (C:\Windows\System32\config\systemprofile\.android), the file is simply named "adbkey" with no extension. If there is no key file when ADB runs, it will generate one automatically.
Mine was located in my user folder (C:\Users\*username*\.android\). All I had to do was delete the adbkey file (there was also a file named "adbkey.pub" which I deleted as well), restart the adb server in command prompt (adb start-server) and plug my phone in. I instantly received the RSA Fingerprint Key window on my G3 allowing connection between the two devices. Then typing "adb devices" returned my phone's serial number followed by "device" showing it was available. I went back to the C:\Users\*username*\.android\ folder and sure enought there were new "adbkey" and "adbkey.pub" files.
Problem finally fixed!
Here are some VERY useful links which helped me come to this fix:
How ADB enables a secure connection
Reconstructing ADB's RSA key file
Try using this set of Vertizon g3 drivers: https://mega.co.nz/#!58YHAZaQ!yNlgZG1m7toHBZp_0HF1jSQ66gMoZmmiDrNq9W5aJIc
Open the .zip, run the .msi file on Windows.
I do not run the G3's auto-install software when I plug it into the PC.
I do set the G3 to "PTP" USB before initially connecting to the PC.
The adb file in the ioroot "bts" subfolder should be okay to run on Windows.
When the phone is attached to the PC, change its USB connection type to Internet, with submenu type Ethernet. At least on my phone, right when I change the phone connection to Internet/Ethernet is when I get the phone popup to accept the PC's RSA fingerprint.
If I then run "adb devices" on my PC, I'll see the random ID followed by "attached", which means I have a good connection. If this doesn't happen, unplug, then replug, the USB connection at the PC side.
Then I can "cd .." and run ioroot.bat.
Good luck!
markfm said:
Try using this set of Vertizon g3 drivers: https://mega.co.nz/#!58YHAZaQ!yNlgZG1m7toHBZp_0HF1jSQ66gMoZmmiDrNq9W5aJIc
Open the .zip, run the .msi file on Windows.
I do not run the G3's auto-install software when I plug it into the PC.
I do set the G3 to "PTP" USB before initially connecting to the PC.
The adb file in the ioroot "bts" subfolder should be okay to run on Windows.
When the phone is attached to the PC, change its USB connection type to Internet, with submenu type Ethernet. At least on my phone, right when I change the phone connection to Internet/Ethernet is when I get the phone popup to accept the PC's RSA fingerprint.
If I then run "adb devices" on my PC, I'll see the random ID followed by "attached", which means I have a good connection. If this doesn't happen, unplug, then replug, the USB connection at the PC side.
Then I can "cd .." and run ioroot.bat.
Good luck!
Click to expand...
Click to collapse
... no dice.
Ok, I'm switching to my Windows 8.1 machine (my laptop is my server and android-dirty-work machine).
So it worked without hesitation on my 8.1 machine. I used the drivers listed in the ioroot thread (same as the drivers from LG) and the process went off without a hitch. I have no idea why my Vista machine and G3 don't get along but I'll need to figure it out when I do further adb work because I use my laptop for that.
Thank you markfm for the extra drivers.
I'll call this solved for now but if I find out further reasons why it didn't work I'll post it here for others who have similar struggles.
Ok I finally solved this. It turned out there was something wrong with my laptop's ADB RSA key. All I had to do was delete the key file, run the ADB Server and connect the phone. ADB will automatically generate an RSA key if none exists. The RSA key was located in C:\Users\*username*\.android and was simply named "adbkey" with no extension. There was also a file named adbkey.pub (Microsoft Publisher) which I'm assuming is a viewable version of the key. I deleted both of these, re-ran the ADB server and voila I instantly received the RSA Key Fingerprint confirmation window on my G3.
Done and done!
unable to generate RSA key on my MCB
I've read and re-read all the entries addressing this issue. I have a black G3 and am using a 2013 Mac Book Pro. I've followed the instructions to the letter many times but with no success. I'm at a loss. Any ideas would be greatly appreciated.
scooterd said:
I've read and re-read all the entries addressing this issue. I have a black G3 and am using a 2013 Mac Book Pro. I've followed the instructions to the letter many times but with no success. I'm at a loss. Any ideas would be greatly appreciated.
Click to expand...
Click to collapse
You'll have to bear with me because I'm not familiar with Mac file structure.
I would start from scratch. Do all these before trying to run adb again.
On your computer:
-Delete adbkey & adbkey.pub from the .android folder (I'm not sure where that is on a Mac, Home\.android?).
-I'm not sure if Macs have a device manager, but check that your phone is correctly recognized and the drivers are installed properly.
On your phone:
-Ensure you've got developer features unlocked
-Double check that you've got usb debugging enabled.
-Tap the "Revoke USB Debugging Authorizations" button below USB debugging in developer options.
-When you're plugged in be sure to set your connection to Internet >>Ethernet (you'll see the debugging icon in the notification bar if it's connected right).
I know a lot of that is basic and redundant but if it's all done correctly then it should work. If it doesn't work it gives us a good starting point to troubleshoot.
If you want to test it open terminal, change directory to the bts folder in the ioroot folder and start adb (adb start-server), with everything done right you should get the rsa window on your phone right now. Type "adb devices" and see what comes back.
Thanks for the assistance. I never could get anywhere with my MBP so I used Windows. I downloaded the drivers and got the RSA key after revoking all prior authorizations. However, but my computer still won't see my G3 in internet/usb debugging mode. It reads it in MTP, PTP and USB charge mode. But that's it. I've rooted numerous phones before, mostly Samsung, but this one has me stumped. Any ideas?
scooterd said:
Thanks for the assistance. I never could get anywhere with my MBP so I used Windows. I downloaded the drivers and got the RSA key after revoking all prior authorizations. However, but my computer still won't see my G3 in internet/usb debugging mode. It reads it in MTP, PTP and USB charge mode. But that's it. I've rooted numerous phones before, mostly Samsung, but this one has me stumped. Any ideas?
Click to expand...
Click to collapse
Use whatever mode will enable USB Debugging. If Internet>>Ethernet doesn't work then use any other mode that will. It's not necessarily important what mode your phone is in, but what mode will allow USB Debugging. If you have it in MTP, PTP, Camera or any other, and you have the USB Debugging icon in the notification bar, try the "adb devices" command and if it returns "*serial* device" then you should be good to go to root.
Once your phone has enabled USB Debugging and accepted the RSA key from your computer then the connection is made and your phone will accept the ioroot commands.
scooterd said:
Thanks for the assistance. I never could get anywhere with my MBP so I used Windows. I downloaded the drivers and got the RSA key after revoking all prior authorizations. However, but my computer still won't see my G3 in internet/usb debugging mode. It reads it in MTP, PTP and USB charge mode. But that's it. I've rooted numerous phones before, mostly Samsung, but this one has me stumped. Any ideas?
Click to expand...
Click to collapse
Is your phone a Verizon Model (VS985)? I'm assuming not because I don't have PTP mode on my G3. If it's not Verizon, the ioroot method suggests using PTP mode.
Yes it is a Verizon VS985. I bought it last week. I have four options, charge, MTP, internet and PTP when I connect my phone to the PC. I get usb debugging under either ethernet or modem. Device Manegr sees my phone and I get the RSA key. I never get a terminal which let's me know something isn't right. This is truly weird but I won't give up. I'll start over and see what happens. Again, thanks for your patience.
scooterd said:
Yes it is a Verizon VS985. I bought it last week. I have four options, charge, MTP, internet and PTP when I connect my phone to the PC. I get usb debugging under either ethernet or modem. Device Manegr sees my phone and I get the RSA key. I never get a terminal which let's me know something isn't right. This is truly weird but I won't give up. I'll start over and see what happens. Again, thanks for your patience.
Click to expand...
Click to collapse
No problem at all, happy to help! It sounds like you have everything set up properly, however the terminal doesn't open automatically (you need to do it manually). But you shouldn't need to open the terminal to get ioroot to work, after you've unzipped the ioroot.zip file, simply navigate to the ioroot folder, right-click on ioroot.bat and choose Run as Administrator. That should run through the entire process for you.
If you want to test your adb connection (testing not required for ioroot to work) you'll need to open the command prompt manually. Press Windows Key+R, in the run window, type cmd and press enter, this will open the command prompt. When you're in the command prompt, you'll need to change directory to the location of adb.exe in the bts folder inside the ioroot folder. Mine was in a folder named android on my C drive so the address looked something like this: C:\android\ioroot\bts the command you'll type in command prompt would be: cd C:\android\ioroot\bts then press enter. Then you can type adb devices and see if you're connected properly.
Okay. Here's where we are. I did everything you suggested. I got the RSA key and the G3 went into recovery mode. I toggeld down to the appropriate command and hit the power button. The little green guy fell over with the dreaded red triange and I got the message "This version of ioroot does not support your device/firmware combo. Please downgrade to previously supported software version. My G3 is running VS98510B. I can't post in the devlopment section but wonder if a software update prevents root the the version being used. Just a question but at least I know I'm not going crazy.
---------- Post added at 04:33 PM ---------- Previous post was at 03:46 PM ----------
scooterd said:
Okay. Here's where we are. I did everything you suggested. I got the RSA key and the G3 went into recovery mode. I toggeld down to the appropriate command and hit the power button. The little green guy fell over with the dreaded red triange and I got the message "This version of ioroot does not support your device/firmware combo. Please downgrade to previously supported software version. My G3 is running VS98510B. I can't post in the devlopment section but wonder if a software update prevents root the the version being used. Just a question but at least I know I'm not going crazy.
Click to expand...
Click to collapse
You sir are a genious. After changing my USB cord, I'm rooted and all is well in the world. It's always the little things that matter
My Pleasure! It's the little things that matter and the little things that kill!! I'm glad you're finally victorious!:laugh:
EDIT: Nevermind, I got it to work through Internet>Ethernet.
postal302 said:
Is your phone a Verizon Model (VS985)? I'm assuming not because I don't have PTP mode on my G3. If it's not Verizon, the ioroot method suggests using PTP mode.
Click to expand...
Click to collapse
Hi, hope this thread is somewhat still alive. sorry for the late add on... please help.
Sorry I'm a complete moron when it comes to rooting and ADB / RSA stuff and have no idea what exactly i am doing but for some reason my macbook won't allow me to authorize my oneplus. the authorize computer dialog box never pops up however i get a notification when my phone is plugged in that debugging is active. developer options have been reset, multiple usb cables have been used, and authorization has been revoked multiple times as well.
Im not sure how to access my adb settings on mac and when i attempt to go into terminal and try kill-server / start-server commands i get error messages as commands are not recognized.
Any help is appreciated as i can no longer use stock rom on OPO and i can't go about rooting my device
Wrong forum area -- this is for the Verizon LG G3 smartphone.
Same here! WITH NEXUS 7
Tried all the methods and spent almost 20hrs experimenting to retrieve rsa fingerprint, but in vain
Can you please suggest any remedy?
I cant install any os and unfortunately, my status bar and softkeys disappeared after using softkeyz apk...Dont tell to delete dalvaik data and cache[ it didnt work]
Please...
Jesusmaryqueen said:
Tried all the methods and spent almost 20hrs experimenting to retrieve rsa fingerprint, but in vain
Can you please suggest any remedy?
I cant install any os and unfortunately, my status bar and softkeys disappeared after using softkeyz apk...Dont tell to delete dalvaik data and cache[ it didnt work]
Please...
Click to expand...
Click to collapse
It is also possible to overcome the situation, by installing Mobilego software on your PC and follow the instructions accordingly (connecting your android using usb & debugging etc,.). You will get a RSA fingerprint request.. Easy Once it's done, u can close the mobilego software in the PC and open someother software for example Bacon root toolkit for oneplus one etc etc.. Hope this helps
adbkey doesn't exist
I don't know what i did wrong before, but my computer just DOES NOT have adbkey and adbkey.pub anywhere! First, i thought it was my phone's fault. Then, i tested in a different pc, and it worked. How do i generate those keys? There are no helpful answers in the internet yet...