Hey guys!
I'm new to Android and how it all works.
here I have a Galaxy S I9000 on T-Mobile with 2.1
I wanted to upgrade to 2.2 and from what I've read on the forums I did the following:
downloaded Odin and .pit files (used odin 1.7, and pit file ending in 512)
then used for PDA file I9000UGJL2_homebinary_add_param.tar
plugged my phone in, went into download mode and started installing the 2.2 I guess.. and now is COMPLETELY DEAD!! won't turn on at all and I'm really frustrated. I removed the battery and the sd card and tried to boot it up few times ... but NOTHING!!!
please help!!!
nitehawkbg said:
Hey guys!
I'm new to Android and how it all works.
here I have a Galaxy S I9000 on T-Mobile with 2.1
I wanted to upgrade to 2.2 and from what I've read on the forums I did the following:
downloaded Odin and .pit files (used odin 1.7, and pit file ending in 512)
then used for PDA file I9000UGJL2_homebinary_add_param.tar
plugged my phone in, went into download mode and started installing the 2.2 I guess.. and now is COMPLETELY DEAD!! won't turn on at all and I'm really frustrated. I removed the battery and the sd card and tried to boot it up few times ... but NOTHING!!!
please help!!!
Click to expand...
Click to collapse
Well I can tell you you should only ODIN when something messes up, and you're in the completely wrong thread. Us Galaxy S Vibrant owner usually don't know too much of GT I9000 phones But go back to the thread where you got the odin files and post there, or at least post in your phone's correct section.
But anyways, can you still get into download mode?
this is where I was told to come actually. I have a Galaxy S (Vibrant) on T-Mobile, I alerady posted on the I9000 thread but not answer at all.
I can't get to the download mode at all, my phone has a hardware lock on the recovery menu...so I'm stuck
nitehawkbg said:
this is where I was told to come actually. I have a Galaxy S (Vibrant) on T-Mobile, I alerady posted on the I9000 thread but not answer at all.
I can't get to the download mode at all, my phone has a hardware lock on the recovery menu...so I'm stuck
Click to expand...
Click to collapse
I think bobbb thought you have an international galaxy s, because you said you have an i9000.
So you have a Vibrant Correct?
It appears you used the wrong tar file. You used the one meant for the international galaxy s, not the one meant for vibrant.
You said you can't get into download mode at all because your phone is hardware locked. Then how did you get into download mode in the first place to use odin the first time you messed up?
Try the following. Download the correct 512 pit, and the correct JFD tar for your Vibrant.
1) open odin
2) place pit in pit
3) place tar in pda
4) take battery, sim and sd card out from phone
5) put battery back in, leave the rest out
6) hold down volume down/up (don't touch power)
7) while holding down both volume buttons, plug in the USB cord, with the other end connected to your computer
If that didn't work, try the following, which has worked for me.
1) open odin
2)place pit in pit
3) tar in pda
4) take battery, sim and sd out.
5) HOLD DOWN VOLUME UP/DOWN AND NEVER LET GO (DON'T TOUCH POWER)
6) WHILE STILL HOLDING THAT DOWN, PUT ONLY THE BATTERY BACK IN
7) WHILE STILL HOLDING DOWN VOLUME UP/DOWN, NOW PLUG IN THE USB CABLE INTO YOUR PHONE
Once in download mode, you can let go of the volume keys.
Hopefully that gets you back into download mode and you can just flash back to stock JFD.
If you still can't get into download mode, you might want to see if a USB JIG will work.
I'm just confused how you got into download mode the first time if your phone is hardware locked, did you use ADB?
Anyway, try the method above, hopefully that gets you back into download.
-Ps... you want to be in download mode, not recovery.
Do what Samsung said but if I'm correct in what you said? you are using Odin 1.7? get the newest version which is v3 i believe... could have been a problem with that version.. correct me if I'm wrong Samsung... but always screwed up my phone with the older version....
Merry Christmas everyone!
anyways...none of the methods ever worked.
The believe that the download mode worked before I screwed up the bootloader.
I read somewhere that on the T-Mobile Vibrant if you go into download mode for first time and your update fails, you can't do anything
I guess I will be without a phone for X-Mas and the next day, because I work
nitehawkbg said:
Merry Christmas everyone!
anyways...none of the methods ever worked.
The believe that the download mode worked before I screwed up the bootloader.
I read somewhere that on the T-Mobile Vibrant if you go into download mode for first time and your update fails, you can't do anything
I guess I will be without a phone for X-Mas and the next day, because I work
Click to expand...
Click to collapse
Ya if you messed up your bootloader you might be out of luck, but honestly I'm not an expert, so I'm not sure if you did or did not mess up your bootloader by trying to install the wrong tar file.
Odin has given me a fail before, and I got the phone to computer icon and I was able to get into download mode, I guess my bootloader was still fine.
I have a feeling you can still save your phone, keep asking, don't give up.
the latest odin is odin3 v1.70. I think.
I was trying to install cyanogen on my galaxy s2 which is rooted with clockwork mod but after the install finished and I rebooted, it got stuck on the boot screen - the black screen with the words "Samsung Galaxy s2" and the yellow triangle on it.
I can't seem to figure out how to load download/recovery mode via the phone. I know you're supposed to hold down volume down + home + power, but I think it doesn't work on the ATT model since the home key is capacitive so it doesn't register. I got around this to flash clockwork mod by connecting the phone to my computer and using adb. Now that it's stuck on the boot screen, though, the computer won't recognize it so I'm unable to get to recovery and restore my phone.
How do I get my phone back to working order?
I think there is an att sgs2 forum, but your best bet is to get it into download mode since you can't get in recovery.
Edit: try using kies it may help recognizing your phone or try on another computer
I've been through this stage a few times in the last 24hrs as I got to grips with my new S2.
My basic un-bricking solution was to boot the phone in Download mode and use Odin with a suitable "Samsung Official" ROM from www.samfirmware.com. The one I downloaded came with the latest Odin included. It had four *.tar.md5 files and the one which unbricked my phone was called CODE_I9100_blah_blah.tar.md5.
amalak said:
I've been through this stage a few times in the last 24hrs as I got to grips with my new S2.
My basic un-bricking solution was to boot the phone in Download mode and use Odin with a suitable "Samsung Official" ROM from samfirmware The one I downloaded came with the latest Odin included. It had four *.tar.md5 files and the one which unbricked my phone was called CODE_I9100_blah_blah.tar.md5.
Click to expand...
Click to collapse
This just got my phone back to working condition. Thanks!!
amalak said:
I've been through this stage a few times in the last 24hrs as I got to grips with my new S2.
My basic un-bricking solution was to boot the phone in Download mode and use Odin with a suitable "Samsung Official" ROM from www.samfirmware.com. The one I downloaded came with the latest Odin included. It had four *.tar.md5 files and the one which unbricked my phone was called CODE_I9100_blah_blah.tar.md5.
Click to expand...
Click to collapse
bro, i got 3 files when i extracted the zip file:
1. CODE_I9100XWKF1_CL265340_REV02_user_low_ship.tar.md5
2. GT-I9100-MULTI-CSC-OLBKE5.tar.md5
3. MODEM_I9100DXKF1_REV_02_CL1017685.tar.md5
do i flash them together in odin? if so, what are the options checked? ex: pda, phone, csc etc...
thanks for the help bro.
After I flashed CWM I found out my tablet is going in for repair. I need to flash back to the stock recovery, otherwise they wont repair it
Hope you can help
http://devphone.org/files/gtab101/FilesForDummies.zip
got this from the dev sticky (search).
It has odin and the stock recovery.
RootzFan said:
http://devphone.org/files/gtab101/FilesForDummies.zip
got this from the dev sticky (search).
It has odin and the stock recovery.
Click to expand...
Click to collapse
any instructions on usiing all the files in the zip file might help too !!!!
Not hard to search (for instructions or the file).
Download it.
Open ODIN
load the recovery (PDA from memory)
put tab in download mode
connect to pc
click start on odin.
30 seconds later your phone reboots with the stock recovery
I have tried this and still stuck on 'samsung galaxy tab' screen.
all i need to do is wipe the GT, and install stock 3.1 rom on it and start again but cant find a instruction that will tell me ??
paul
^ please explain in detail what you have done... the files used and the steps taken.
Did you verify the md5 of the file you flashed in ODIN (if the md5 was known)?
All i have is the filesfordummies.zip file unzipped.
i need guidance from there on.
Cheers
^ are you using the stockretail tar file from that and odin? When you load the recovery, put the tab in download, connect to pc..... does odin have a yellow com# shown, if not, wait a bit... could be installing the drivers.... if it is showing and you have the stock recovery loaded.... press start, wait maybe 30 seconds and your tab should be rebooting.
what is not happening for you in that sequence?
After that my tab is stuck on 'samsung galaxy tab' loading screen and has been for around 2 hours.
paul
Hold down volume and power... release power when the tab splash screen comes up (still hold volume down).
what recovery shows up? I assume you had CWR before.... is it that, or stock?
what tab model do you have
I know there has been other treads about this before but none of the suggestions seemed to work for me. I searched and searched and I'm just not finding a fix. I hate to do these posts when an easy answer is right there but I just can't figure it out and it's killing me. So here it is:
I just got this Verizon Galaxy Tab that would not come on - only showed the battery charging icon. I just charged it over night and it came on once. However, processes kept shutting down. For instance, when I went into settings and tried to connect to my wifi network, the whole process would just close down. So I let it get to about 40% and reboot it to download mode (there was no recovery). I found the correct .tar file for it and flashed it with ODIN3 v1.85. It completed successfully but now it won't boot past the Samsung splash screen. Once the splash screen comes up, it will just go back to the large battery charging icon in the middle of the screen.
Then I tried the other option where you get into recovery and nothing happens at all. The screen is backlit black (you can just see light around the edges of the screen) and nothing ever happens.
So now, it's just charging but it seems to charge very slowly. I was wondering if this is a battery issue or some strange sequence that needs to be done. It seems to be at about 40% again. Any other suggestions would be appreciated.
These are other things I've tried:
hold the power button down for 30 seconds
Hold the power button down while touching the screen
More suggestions would be appreciated.
Now the tablet is fully charged but it still gets stuck on the splash screen when trying to boot up. Still have no recovery. Also, I'm not able to find a PIT file to re-partition. Can someone tell me how to get the stock recovery back at least? I've been looking but I can't find a file to flash for the recovery.
Same problem
Hi, I have the same issue basically. I have the Galaxy Tab SGH i957D 8.9 (TELUS) and flashed it to root last night, now I have the same problem. Except I have CWM installed, I was able to install that AFTER I locked it up. Help from one of the GURUs here would be great. It's obviously a problem caused by flashing it.
So try flashing with CWM, at least you'll have a good recovery on it. If we work together, we may be able to come up with a solution for our dilemma. I don't believe it;s a major problem, I had the same issue with my captivate phone when trying to CWM and Cyanogenmod, and I got it working perfectly, so there is hope.
I have tried the stock rom, rooted rom, and a couple of others, but still can;t get past the splash screens. Left it overnight trying to boot, and all it did was kill the battery. I can;t even turn it off, it just reboots every time I try shutting down. I CAN get to download and recovery mode though, and flash it all I want with Odin 3.7 and 1.83, just never boots past the splash screens.
DermagraFX said:
Hi, I have the same issue basically. I have the Galaxy Tab SGH i957D 8.9 (TELUS) and flashed it to root last night, now I have the same problem. Except I have CWM installed, I was able to install that AFTER I locked it up. Help from one of the GURUs here would be great. It's obviously a problem caused by flashing it.
So try flashing with CWM, at least you'll have a good recovery on it. If we work together, we may be able to come up with a solution for our dilemma. I don't believe it;s a major problem, I had the same issue with my captivate phone when trying to CWM and Cyanogenmod, and I got it working perfectly, so there is hope.
I have tried the stock rom, rooted rom, and a couple of others, but still can;t get past the splash screens. Left it overnight trying to boot, and all it did was kill the battery. I can;t even turn it off, it just reboots every time I try shutting down. I CAN get to download and recovery mode though, and flash it all I want with Odin 3.7 and 1.83, just never boots past the splash screens.
Click to expand...
Click to collapse
Thanx for the reply. As you can see, I've been around these forums for a long time and usually I'm able to work it out but this one has got me stumped. Just wanted to ask you if you have tried to flash a custom ROM in Clockwork? Also, did you go through unlocking the boot loader befor you flashed it? I did not because I received the tablet in this condition. I tried to flash clockwork mod but I get an "invalid file" error in Odin. Once I flashed the stock recovery and it worked fine. But after reflashing the stock rom, the stock recovery is gone now. Do you have a link to the files you used? I'm thinking that the stock recovery is messed up but I can only find that one file.
no I haven't tried flashing through CWM, as I wasn't trying to flash originally, I was just rooting and going easy on it, then it wouldn't boot, so I wasn't prepared and now can't add files to my SD drive.
I didn't unlock the boot, as none of the instructions I read mentioned it (rooting was all I was trying to do).
I don't even have a stock recovery either, all I have is CWM and TWRP.
I'm going to try mounting it in Linux and see if that makes any difference to put roms on my SD drive, as windows doesn't like it anymore, except through Odin, where luckily it seems to work fine... For now.. lol
Fixed!!!
shawndh said:
Thanx for the reply. As you can see, I've been around these forums for a long time and usually I'm able to work it out but this one has got me stumped. Just wanted to ask you if you have tried to flash a custom ROM in Clockwork? Also, did you go through unlocking the boot loader befor you flashed it? I did not because I received the tablet in this condition. I tried to flash clockwork mod but I get an "invalid file" error in Odin. Once I flashed the stock recovery and it worked fine. But after reflashing the stock rom, the stock recovery is gone now. Do you have a link to the files you used? I'm thinking that the stock recovery is messed up but I can only find that one file.
Click to expand...
Click to collapse
ok.. I have mine fixed and running again.
http://samsung-updates.com/device/?id=SGH-I957D
This is the stock flash/rom for Telus on the SGH i957D LTE 4G 8.9 model. Try samsung-updates.com and search for your exact model and carrier.
-Download correct stock image for your tablet.
-Unpack the file you downloaded
-Put your device in DOWNLOAD mode
-Connect it to Computer
-Start ODIN and wait for the COMM status to show as connected
-In PDA box navigate to your file and add it to the box.
-Press start
-Sit back and relax.
-Enjoy the fireworks as your tablet comes back to life..
-YEAH!!!
Life is good again...
DermagraFX said:
ok.. I have mine fixed and running again.
http://samsung-updates.com/device/?id=SGH-I957D
This is the stock flash/rom for Telus on the SGH i957D LTE 4G 8.9 model. Try samsung-updates.com and search for your exact model and carrier.
-Download correct stock image for your tablet.
-Unpack the file you downloaded
-Put your device in DOWNLOAD mode
-Connect it to Computer
-Start ODIN and wait for the COMM status to show as connected
-In PDA box navigate to your file and add it to the box.
-Press start
-Sit back and relax.
-Enjoy the fireworks as your tablet comes back to life..
-YEAH!!!
Life is good again...
Click to expand...
Click to collapse
I'm glad you got the right firmware and fixed your tab! But this site does not list a firmware for the SCH–i905 anywhere. Unless the Verizon Galaxy tab has an alternate model# there is no firmware on the site for my device. Oh well, at least one of us got tablets fixed. Congrats!
Download mode issue.
What recommendations do you guys have for a tablet that will not recognize in download mode?
I accidently flashed a bootloader and had auto reboot on - couldnt flash kernel and modem in time.
My tablet fully boots up, (rom manager says cwm is installed) as well as when i boot into recovery its completely black.
My main concern is that download mode is not recognized. it was previously working prior to installing the bootloader.
What can i do to fix this issue?
younggunner said:
What recommendations do you guys have for a tablet that will not recognize in download mode?
I accidently flashed a bootloader and had auto reboot on - couldnt flash kernel and modem in time.
My tablet fully boots up, (rom manager says cwm is installed) as well as when i boot into recovery its completely black.
My main concern is that download mode is not recognized. it was previously working prior to installing the bootloader.
What can i do to fix this issue?
Click to expand...
Click to collapse
Can you start by giving as much info as possible about your tab, make model# etc.
can you actually get into download mode? Power button and Volume down button till it boots then release pwr.
you may have bad drivers on your pc. I had this problem with my phone when I installed CM.
get into DL mode and then start Odin and hopefully you will see the Com port attached.
then in PDA load the stock rom for your tab.
hopefully at this point youll be all set.
if your tab is fully functional, then try just flashing CWM or TWPR to your tab. I found with mine that CWM works best. I like TWP better for looks and the touchscreen functionality, but I found it gets a bit flaky after a few flashes, where CWM seems more stable.
SHAWNDH...
give me all your info for your tab, make, model.. carrier etc. as much as you can, and I will see if I can find any stock roms while doing my searches. 2 sets of eyes are better than one...
So i have a sch-i905, 4.0.4 - I CAN boot into normal android
I flashed a bootloader last night and had auto reboot ticked. was not able to install the modem or the kernel.
I can get into download mode without any issues,but now download mode says "waiting for cable" and is not recognized by pc as it once was prior to the flash.
I can also get into recovery but its completely black ( assuming due to no kernel flashed )
I can get into android normally, but cant fix firmware through download mode, and recovery.
Please help :X
side note: rom manager says twmp and cwm is installed, though i get no display in recovery only blackness
if i can get download mode to work again or get cwm to show up i can fix it, but dont know where to go from here.
younggunner said:
So i have a sch-i905, 4.0.4 - I CAN boot into normal android
I flashed a bootloader last night and had auto reboot ticked. was not able to install the modem or the kernel.
I can get into download mode without any issues,but now download mode says "waiting for cable" and is not recognized by pc as it once was prior to the flash.
I can also get into recovery but its completely black ( assuming due to no kernel flashed )
I can get into android normally, but cant fix firmware through download mode, and recovery.
Please help :X
side note: rom manager says twmp and cwm is installed, though i get no display in recovery only blackness
if i can get download mode to work again or get cwm to show up i can fix it, but dont know where to go from here.
Click to expand...
Click to collapse
I don't get it. First, you can't flash a kernel using Odin. Second, your tab won't even be able to boot without the kernel.
Sent from my GT-P7500 using Tapatalk HD
younggunner said:
So i have a sch-i905, 4.0.4 - I CAN boot into normal android
I flashed a bootloader last night and had auto reboot ticked. was not able to install the modem or the kernel.
I can get into download mode without any issues,but now download mode says "waiting for cable" and is not recognized by pc as it once was prior to the flash.
I can also get into recovery but its completely black ( assuming due to no kernel flashed )
I can get into android normally, but cant fix firmware through download mode, and recovery.
Please help :X
side note: rom manager says twmp and cwm is installed, though i get no display in recovery only blackness
if i can get download mode to work again or get cwm to show up i can fix it, but dont know where to go from here.
Click to expand...
Click to collapse
If you can get into DL mode, then its probably just an issue of drivers on your pc. Download the samsung drivers and reinstall.
Then put your tab in dl mode. Then connect to the pc with cable, try a different usb port than before.
Then start odin, if you get the Com port showing up in the status box, then flash CWM recovery to the tab. Then start over with what you are trying to do. But I can almost garantee its an issue with drivers on your pc. I had the exact same problem with my phone when I did it,
and fixing drivers was the issue. I wss stumped for a long time on that issue. If that doesnt work, look into Heimdall flash utility or Kies and go from there.
Hope this helps. Or at least gets you on the right track.
update
DermagraFX said:
If you can get into DL mode, then its probably just an issue of drivers on your pc. Download the samsung drivers and reinstall.
Then put your tab in dl mode. Then connect to the pc with cable, try a different usb port than before.
Then start odin, if you get the Com port showing up in the status box, then flash CWM recovery to the tab. Then start over with what you are trying to do. But I can almost garantee its an issue with drivers on your pc. I had the exact same problem with my phone when I did it,
and fixing drivers was the issue. I wss stumped for a long time on that issue. If that doesnt work, look into Heimdall flash utility or Kies and go from there.
Hope this helps. Or at least gets you on the right track.
Click to expand...
Click to collapse
dont think its a driver issue.
it was working fine in download mode prior to me flashing a bootloader.bin, and yes you can flash a kernel.bin through odin, as well as a modem.bin.
I was in the process of installing cwm this way when it happened.
I can get into the os, i can get adb working fine, recovery is just a black screen though it goes into it. and i can get into download mode still, just stuck at "waiting for cable" no interaction with device manager
---------- Post added at 12:24 AM ---------- Previous post was at 12:22 AM ----------
younggunner said:
dont think its a driver issue.
it was working fine in download mode prior to me flashing a bootloader.bin, and yes you can flash a kernel.bin through odin, as well as a modem.bin.
I was in the process of installing cwm this way when it happened.
I can get into the os, i can get adb working fine, recovery is just a black screen though it goes into it. and i can get into download mode still, just stuck at "waiting for cable" no interaction with device manager
Click to expand...
Click to collapse
Ive tried another pc as well. I dont believe its a driver issue as there is 0 interaction in download mode with device manager. but prior it easily was detected in odin no issues.
younggunner said:
dont think its a driver issue.
it was working fine in download mode prior to me flashing a bootloader.bin, and yes you can flash a kernel.bin through odin, as well as a modem.bin.
I was in the process of installing cwm this way when it happened.
I can get into the os, i can get adb working fine, recovery is just a black screen though it goes into it. and i can get into download mode still, just stuck at "waiting for cable" no interaction with device manager
---------- Post added at 12:24 AM ---------- Previous post was at 12:22 AM ----------
Ive tried another pc as well. I dont believe its a driver issue as there is 0 interaction in download mode with device manager. but prior it easily was detected in odin no issues.
Click to expand...
Click to collapse
Ok... Im getting confused here... You Can still flash with Odin? Then you can install a new recovery on it. If device manager on the pc is not working, then you probably have a corrupt install, or the wrong rom file for your particular tab, and the usb drivers arent correct for your tablet.
Personally, I would start by downloading a stock rom file and return the tab to factory before starting anything, so you have it working as it should before continuing further.
If you DO HAVE a stock rom, maybe you could pass it along, i believe shawndh who started this thread is in need of one for the same tablet.
confusion fixed
DermagraFX said:
Ok... Im getting confused here... You Can still flash with Odin? Then you can install a new recovery on it. If device manager on the pc is not working, then you probably have a corrupt install, or the wrong rom file for your particular tab, and the usb drivers arent correct for your tablet.
Personally, I would start by downloading a stock rom file and return the tab to factory before starting anything, so you have it working as it should before continuing further.
Click to expand...
Click to collapse
I cannot currently get download mode to recognize anything. just keeps saying "waiting for cable" thats why i cant do anything in download mode. It was currently working prior to flashing the bootloader through odin with the "auto reboot" accidentally clicked.
younggunner said:
I cannot currently get download mode to recognize anything. just keeps saying "waiting for cable" thats why i cant do anything in download mode. It was currently working prior to flashing the bootloader through odin with the "auto reboot" accidentally clicked.
Click to expand...
Click to collapse
Oh... Well then it is beyond the scope of any problem I have encountered, or seen a solution to. I thought you could still connect in download mode.
Can you change usb debugging mode in tablet settings, that may enable you to connect? If not I dont think I personally can help, as your posts read like you could still use Odin.
On my phone, (galaxy S) nothing would connect after I messed up, but could do things with Heimdalls utility. See if you can connect with that. Worth a try, it does the same as Odin, but connects differently somehow.
DermagraFX said:
Oh... Well then it is beyond the scope of any problem I have encountered, or seen a solution to. I thought you could still connect in download mode.
Can you change usb debugging mode in tablet settings, that may enable you to connect? If not I dont think I personally can help, as your posts read like you could still use Odin.
On my phone, (galaxy S) nothing would connect after I messed up, but could do things with Heimdalls utility. See if you can connect with that. Worth a try, it does the same as Odin, but connects differently somehow.
Click to expand...
Click to collapse
i even went as far as getting a brand new cable to see if it was my cable still same thing. No response in download mode for either pc's ive tried.
little stumped....
possible clues: when tablet boots up, it boots up to a bright black screen, only once it completely boots up am i able to see my display properly.
DermagraFX said:
Can you start by giving as much info as possible about your tab, make model# etc.
can you actually get into download mode? Power button and Volume down button till it boots then release pwr.
you may have bad drivers on your pc. I had this problem with my phone when I installed CM.
get into DL mode and then start Odin and hopefully you will see the Com port attached.
then in PDA load the stock rom for your tab.
hopefully at this point youll be all set.
if your tab is fully functional, then try just flashing CWM or TWPR to your tab. I found with mine that CWM works best. I like TWP better for looks and the touchscreen functionality, but I found it gets a bit flaky after a few flashes, where CWM seems more stable.
SHAWNDH...
give me all your info for your tab, make, model.. carrier etc. as much as you can, and I will see if I can find any stock roms while doing my searches. 2 sets of eyes are better than one...
Click to expand...
Click to collapse
Thanx for the reply. I have the SCH-i905 32gb Galaxy 10.1 tab. The carrier is Verizon. I've spent days looking for another download source but I can only find one - there's a link from this site. Others have posted that it did restore their devices so I'm thinking that there are some bad clusters that need to be quarantined but I can't even find a tool for the Galaxy Tab that will do or check for that. I'd appreciate it if you could take a look though. Thanx.
younggunner said:
I cannot currently get download mode to recognize anything. just keeps saying "waiting for cable" thats why i cant do anything in download mode. It was currently working prior to flashing the bootloader through odin with the "auto reboot" accidentally clicked.
Click to expand...
Click to collapse
Are you connecting to a USB port that is on the motherboard of your computer? Mine will only recognize my tablet with one port. The other ports are not recognized at all by ODIN.
shawndh said:
Thanx for the reply. I have the SCH-i905 32gb Galaxy 10.1 tab. The carrier is Verizon. I've spent days looking another download source but I can only find one - there's a link from this site. Others have posted that it did restore their devices so I'm thinking that there are some bad clusters that need to be quarantined but I can't even find a tool for the Galaxy Tab that will do or check for that. I'd appreciate it if you could take a look though. Thanx.
Click to expand...
Click to collapse
I don't think its a cluster issue, just a bad flash previously. But you'll see from the link, yours is also known as the P4vzw. Well check the link and make sure that's your tab that I found. Then have a look at ALL the files for that tab.
Have you seen/tried this one... here's the thread STOCK ROM FOR YOUR TAB...
forum.xda-developers.com/showthread.php?t=1342995
Here's just the file.
http://goo.gl/XPMXv
Try flashing CWM recovery to your tab, and try a file from cyanogenmod
http://wiki.cyanogenmod.org/w/P4vzw_Info
Or just try the CM ROM first maybe and see what happens. I don't remember what you have for recovery. There are a bunch on there, but all nightly that I saw, but even that would be better than nothing for now if it works.
I'm still looking, but I know what you're saying about few and far between. I think they all are for the tabs. Let you know if I find anything else.
Another mod ROM. http://www.teamandroid.com/2012/08/...tab-101-sch-i905-android-411-aosp-jelly-bean/