GingerStreak 2.4.4 Release Post
A FACTORY RESET IS HIGHLY RECOMMENDED TO ALLOW THIS TO WORK CORRECTLY DUE TO THE NUMBER OF CHANGES, SO BACKUP IS RECOMMENDED
This Release Version incorporates changes in the INSTALLATION PROCESS, please read the options available to you and the correct method of applying them before proceeding to flash the 2.4.4 Zip File!
( Disclaimer : As before, this ROM is heavily updated and still being developed at a fairly rapid pace. Bugs are listed below.)
1.0 > INSTALLATION CHANGES :
With 2.4, several choices must be made before flashing the Zip file via StreakMod or Clockwork Recovery. These choices are made with very simple edits to a Text file ( explained in section 1.2 below )
Important Options Available ( other options are listed below in Section 1.1 ) -
A.Launcher Option : Users may now select their default Launcher of choice before installation. The options available are LauncherPro, ADW, Stage UI and GingerBread Launcher. GingerBread launcher is installed by default if nothing is chosen.
B.Pixel/LCD Density : Default LCD Density can be set during Installation. Values available for selection are : 120,140,180,200 and 240 DPI. also for densitys of 200 or higher a modifed contacts and phone app are installed to allow correct functionality
C.Other Settings : Other settings available include -
•us120/140/180/200/240 -
(installs build.prop with USA related Region Settings and an LCD Density of 120140/180/200/240)
•bios
( installs the Streak BIOS Bootanimation )
•noapps
(this will install an absolute base system with no additional apps installed and the gingerbread launcher as the default launcher)
1.1 > INSTALLATION HOW TO
A. You will need to create a text file on your Streak's MicroSD Card. The file can be created in your Text Editor of choice ( such as Notepad ).
B.This file will be called 'install.txt' - Ensure that this is the exact syntax and that the file is saved with a '.txt' suffix.
C.This file must be saved in the root of the sd card.
E.Inside this text file, you may type each option that you select on a separate line. All the options available to you are listed below. Here is an example :
Code:
adwlauncher
bios
That is it. You can save this text file as install.txt
You will then boot into recovery ( StreakMod or Clockwork ) and begin the Zip file installation process as usual.
! The full list of Options available are as follows :
Code:
noapps - this will install an absolute base system with no additional apps installed and the gingerbread launcher as the default launcher
adwlauncher - this installs adw launcher Launcher
launcherpro - this installs launcherpro Launcher
stageui - this installs dells Stage UI Launcher (the 1.6 version from 2.2.2 rather than the 1.5 from gb)
density120 - sets lcd_density to 120 by default
density140 - sets lcd_density to 140 by default
density180 - sets lcd_density to 180 by default
density200 - sets lcd_density to 200 by default
density240 - sets lcd_density to 240 by default
arabic - add arabic mod - will break gps
us120 - installs build.prop with usa related region settings (LCD Density of 120)
us140 - installs build.prop with usa related region settings (LCD Density of 140)
us160 - installs build.prop with usa related region settings (LCD Density of 160)
us180 - installs build.prop with usa related region settings (LCD Density of 180)
us200 - installs build.prop with usa related region settings (LCD Density of 200)
us240 - installs build.prop with usa related region settings (LCD Density of 240)
bios - installs the Streak BIOS Bootanimation thanks to Fone_Fanatic and Frysee
noswype - removes the preinstalled swype install to allow swype beta to work
zeam - installs the zeam launcher, a free open source launcher designed to be small and fast.
portrait - installs modified files for portrait lockscreen
2.0 > OVERVIEW/SUMMARY OF INSTALLATION PROCESS
1.Download GingerStreak-2.4.4.zip from the links below
2.Place Zip file into Root of SD Card
3.Make a text file and type in the options you would like to chose as shown above.
4.Save file under SDCard>install.txt
5.Boot into StreakMod or Clockwork Recovery
6.Select Update from Zip File > Select Zip File From SD Card > GingerStreak-2.4.4.Zip
7.Wait for installation.
8.First Boot may take longer than a normal boot. Things are being installed, stuff is being generated. Patience.
9.Enjoy.
Most Recent Stable Version: v2.4.4
-----------------
Changelogs
-----------------
changelog:
added cifs support to kernel
added reboot option to power menu
hopefully fixed slow animation of crt anim
updated system apps(gmail,market,facebook)
fixed voice search FC
Updated Busybox, SU Binary and Superuser app
Fixed flash video crashes
Removed twitter - Reinstall from Market
Added advanced installer back - See below
Fixed Alarm Crash
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Please if you can and are able to donate to help me upgrade my compile server in preperation for the imminent arrival of ICS - any amount will be highly appreciated
GBP Donate | USD Donate
Rom Download Links:
Primary Download Site: http://mirror2.strea...treak-2.4.4.zip
YOU MUST FLASH THE BELOW BASEBAND AND DSP1 IMAGES TO ALLOW THIS BUILD TO WORK CORRECTLY!!
Baseband File Download:
Mirror 1: http://mirror2.strea...id.com/amss.mbn
DSP1 File Download:
Mirror 1: http://mirror2.strea...id.com/dsp1.mbn
Quick How to for flashing the above files - assuming you already have fastboot setup and configures on your pc.
1. reboot your streak and hold the camera button down until you get a white screen, then hit the fastboot option in the top left corner.
2. connect to pc and wait for streak to show FASTBOOT_MODE
3. run the following commands to flash the baseband and dsp1 then reboot
Code:
fastboot -i 0x413c flash amss amss.mbn
fastboot -i 0x413c flash dsp1 dsp1.mbn
fastboot -i 0x413c reboot
Please if you can and are able to donate to help me upgrade my compile server in preperation for the imminent arrival of ICS - any amount will be highly appreciated
GBP Donate | USD Donate
Thanks to:
Everyone for suggesting things they want adding
ALL the BETA testers who put up with multiple screwed up builds and multiple dell logo freezes to get this working, couldn of done it without you all
everyone else for just jumping in and helping each other, thats the true community sprit that makes me do this sort of dev for android and not some other mobile os.
everyone else who helped/is helping
ALL THE TESTERS DESERVE HUGE THANKS FOR THEIR HELP EVERYONE !!
woohoo!! Your the Man
Wow.. downing StreakDroid as of now!
Sent from my Dell Streak using xda premium
thank you man! (i just wish to add a quick heads up: most apps will show as "not compatible" with your phone in the android market (both web interface and new 3.x app) if you specify an LCD density different than 160 or 240 - keep that in mind!)
Looks good. Up and running - I'll report back within the next days. Thanks Steve!
Thanks Steve!
EDIT:
No more FCs except for the mail/Exchange app-- hope you can do something about it in the next release.
looks good and very fast.
thank you!
one question: why this rom shows android version of 2.3.3 in settings?
johnnyPPK said:
looks good and very fast.
thank you!
one question: why this rom shows android version of 2.3.3 in settings?
Click to expand...
Click to collapse
probably because it is 2.3.3 customly enhanced for use with streak5. thusly it's name is Gingerstreak 2.4.4. due to the many changes DJ-steve and Fards made within the firmware..
another awesome creation
Sent from my Dell Streak using Tapatalk
Installed, same FC of email...Please help to fix....Super fast ROM, and Beautiful..
great! start download immediately. only one question. can this rom be overclocked to 1267 or it will restart after a fewntime like streakdroid 1.9.1?
asusgarb said:
great! start download immediately. only one question. can this rom be overclocked to 1267 or it will restart after a fewntime like streakdroid 1.9.1?
Click to expand...
Click to collapse
How much you can overclock and remain stable will depend on your CPU. Some can be overclocked more than others.
Made a donation. Hope it'll help. Your roms are really fast. Only the lack of stability is what need to be reduced - I already had two LC's on 2.4.3 for 1 day. Will try this now.
down, flashed... any definite word if the V6 script will/won't work with this ROM?
should we reflash AMSS and DSP1 once again? im on Streak 2.4.3
should we reflash AMSS and DSP1 once again? im on Streak 2.4.3
prudviraj said:
should we reflash AMSS and DSP1 once again? im on Streak 2.4.3
Click to expand...
Click to collapse
Nope, no need to do so.
Thanks as always for your great work. Does this version have tun.ko support?
oscar786 said:
Installed, same FC of email...Please help to fix....Super fast ROM, and Beautiful..
Click to expand...
Click to collapse
mine works oerfect, did u follow all the way how he told to install?
Install.txt tweek doesnt seem to work.. any ideas Guys?
I placed the install.txt with density140 no swype as per the instructions in the root of SDcard. Installed multiple times but couldn't get it to work.
Any ideas greatly appreciated..
*****
Hilarious.. the problem is i am actually naming it as install.txt.txt and since the extension of the file type is hidden i did not realize it untill i watched it closely.. Everything seems to work fine...
Thanks for all the suggestions
Thanks,
Raj
prudviraj said:
I placed the install.txt with density140 no swype as per the instructions in the root of SDcard. Installed multiple times but couldn't get it to work.
Any ideas greatly appreciated..
Thanks,
Raj
Click to expand...
Click to collapse
Be sure your install.txt actually has the options saved in it. I made an install.txt in Linux and each time I opened the file it was empty. Used Windows and everything worked fine. You used noswype and not no swype, right?
Related
The README File. Important Read:
Code:
################################################################################
# #
# x10 After-Root Optimiser #
# by ttxdragon #
# README FIRST! #
# #
################################################################################
Index:
1. WARNINGS!!
2. Configuration
-> Important Info
a. JITv002
b. Density Changer
3. How-To Use This.
4. Credits
1. WARNINGS!!
a. I'm not reponsible for any damage to your device. You should always be
able to just re-flash your device, but who knows wth can go wrong.
This is provided as is without any guarantees.
b. DO NOT EDIT THE DEFAULT CONFIGURATION FILES MANUALLY UNLESS YOU KNOW
WHAT YOU'RE DOING! Everything that the config files contain is easily
edited by using the default-configuration as base in the task-editor.
2. Configuration
Follow the steps on screen in the task. It'll ask you a lot of stuff, but
don't worry, it should be extremely clear what you are selecting on.
Important info:
JITv002:
Users of x10a firmware have reported issues with JIT more often than
those using x10i. x10 SO-01B firmware doesn't work with JIT at all.
Furthermore, JIT is only useful to be enabled on SE Roms. Custom ROMs
will have JIT already enabled.
Density Changer:
The default configuration changes the Density to 200, down from 240.
It basically makes everything smaller on screen. Some applications
might not work properly with the new size (because the developers
thought it'd be a great idea to not code the program flexibly
enough to scale nicely)
You can always just set it back to 240 if you decide that's better
for you.
3. How-To: Use This
Requirements: a. Windows or Linux PC,
Ubuntu Linux 10.10 Recommended
@MAC Folks: Don't have one, can't test. feel free to
submit patches/make own version
Usage: 1. Enable USB Debuggin in
Settings -> Applications -> Development
2. Plug in USB Cable
3. On Windows: Run RunMeWindows.bat
On Linux : Run RunMeLinux.sh
4. Follow On-screen instructions.
4. Credits
x10dev-team for tirelessly working to free our x10's
z4mod team for z4root
Cygwin team for developing this GPL'd port of unix utilities to Windows.
( For License and Source-code of Cygwin visit http://www.cygwin.com/ )
CHANGELOG:
Code:
v0.99.1 [2010-11-18]
- Fix JIT installation/un-installation bug
- Fix Config Selection bug
- Add "Install extra System Applications" Option
- Add "AppWidgetPicker 1.2.1" to extra system apps
- Add "Wallpaper Set and Save" to replacement apps
v0.99 [2010-11-17]
- Almost complete Rewrite
- Better output
- Add Root-method
- Allow for custom configurations
- Allow for multiple configurations
- More flexible for easy feature-addons
- Configuration now inside program.
v0.2 [2010-11-10]
- Fix "Space in Path" Bug
- Fix "OS Detection" Bug
- Add "cancel" option before running script on phone
- Move backup folder from /sdcard/post-root/backup to /sdcard/prbackup
- Always push fresh configuration to phone (deletes old config on phone)
- Updated AlarmClock Plus to LCD Density friendly version
v0.1 [2010-11-09]
- Fix Busybox installation
- Add LCD Density Changing Option
v0.0 [2010-11-09]
- Initial Release
To-do List:
- Make Cygwin a Windows-Only Download happening at runtime
- Make useful for Custom Roms -- if possible/wanted.
Download Links:
v0.99.1
Multiupload || DepositFiles
(Please use Multiupload where possible, so that I can have some stats )
Extra Information on what system programs can be removed/replaced from a SE ROM
ttxdragon said:
Directly Replaced by Other apps
Alarm Clock -> Alarm Clock Plus v2
apk: AlarmClock
Browser -> Dolphin HD
apk: SemcBrowser
Drawbacks:
Some Applications are hardcoded to use the browser and won't work without it.
Example: DoCoMo Market
Calculator -> RealCalc
apk: Calculator
Email, Gmail -> K-9Mail
apk: Gmail GmailProvider SemcEmailLargeui
Drawbacks:
Gmail: Some applications don't support K-9Mail for pulling email-info
Examples are Executive Assistant, Pure Messenger Widget
Email: In the Phonebook Email Tab "Write New" doesn't work anymore.
Workaround -> Clicking mail-address in main-view works.
SE Launcher -> ADWLauncher
apk: SemcHomeL
Bloatware
Nordic Apps (Only in Generic Nordic ROM)
/system/etc/customization/applications/Supernytt.apk
/system/app/Telenor_Wrapper.apk
/data/app/com.apegroup.aftonbladet.supernytt.zip
/data/app-private/com.apegroup.aftonbladet.supernytt.apk
Backup And Restore
apk: backupandrestore
Documentation
apk: EManualLauncher EManual usersupport
Creatouch (SE)
apk: creatouch
DebugHelper (Service)
apk: CrashSMS
Digital Clock (Widget)
apk: DigitalClockWidget
Facebook (Client)
apk: facebook
Face Recognition (Service for Camera)
apk: FaceRecognition
Drawbacks:
Face Recognition doesn't work anymore
Learning Client (Service)
apk: LearningClient
Drawbacks:
Word-Learning for the default keyboards is removed.
Live Wallpapers (Wallpapers only)
apk: LiveWallpapers MagicSmokeWallpapers VisualizationWallpapers
Drawbacks:
Only Google Maps Live-wallpaper left
but market live-wallpapers still work
MediaScape
apk: mediascape MediaScapePluginManager
Drawbacks:
Camera App is hard-coded to use Mediascape for Gallery/Share.
Vignette Does well but doesn't help in Video mode.
Means: No easy sharing/viewing for taken videos
No easy way to create a wallpaper from taken pictures.
No way to set contact picture from phonebook. Need to go through Gallery3D instead.
MoxierMail
apk: moxiermail
Music Player (Hidden)
apk: Music.apk
OfficeSuite
apk: officesuite
PC Companion (PC-Sync Service)
apk: PcCompanion
PlayNow
apk: playnow*
Quadrapop (Game)
apk: quadrapop
Recent Calls (Widget)
apk: RecentCalls
Status Switch (Widget)
apk: StatusSwitch
Sony Ericsson Synchronisation
apk: Sync SyncWizard OmaDatasyncService
Search (Widget)
apk: SearchWidget
SetupWizard
apk: SEMCSetupWizard
TimeScape
apk: Timescape* TimeScape*
TrackID
apk: trackid
Voice Dialer
apk: VoiceDialer
Wallpaper Chooser (Selector in Titanium)
apk: Wallpaper Chooser
standard wallpapers: /etc/customization/content/com/sonyericsson/android/wallpaperchooser/wallpaper/
Drawbacks:
No Standard Wallpapers available anymore
Workaround: Get "Wallpaper Set and Save" from Market
Wisepilot
apk: wisepilot
YouTube
apk: YouTube
Excess Keyboards
Note: Keep one of these around, so you can type Or install some Keyboard from the Market before you remove these.
SE Default English
apk: textinput-tng
Chinese
apk: chinesetextinput
Danish
apk: Danish_Keyboard
English
apk: LatinIME
Korean
apk: SEMCTouchPalKoreanQWERTY
Japanese
apk: JapaneseIME
Click to expand...
Click to collapse
Thank you very much but why deleting all the keyboards ?
Not everybody wants to keep any of them. I personally only keep the JP one (and install swype per custom-folder) because I haven't looked for a better JP one yet. And as a little hurdle for those that don't care to read. This is supposed to be configured to everyone's own needs, not to what I dictate, else it would just be scripts without a config-folder
So if i don't want ie the english keyboard to be removed i just remove the English file from the Clean Keyboards ?
Indeed.
It only removes those that have files in the folders.
If you want to keep all, remove the whole directory.
If you want to keep only english, just remove the English file.
It's kinda weird because the .bat went fine, closed and my phone rebooted but the fonts didn't change ,there were no amelioration of Quadrant's score and it's a bit laggy. But the replacements apps ect... are here so I don't know what went wrong :/
Can you pull the log files from your phone? (in /sdcard/post-root/logs) and post then zipped or pastebin them?
My phone went up to almost 700 on second quadrant-run after another reboot (I had one run with 400 before that reboot, one with 620 or so after it)
And that's with a lot of other junk installed.
Well I ran it a second time and same, I can't seem to mount my SD Card, I click on mount and it does nothing... I had this a problem a long long time ago and had to reflash the phone...
EDIT : it just mounted without me touching anything.
Here is the log
can you do adb pull /sdcard/post-root/logs in a cmd in the program folder from the extracted zip?
I zipped all the files there was in logs is it ok ?
Thanks =)
Seems I might've overlooked something simple.
I'm reflashing my phone again, atm.
As a quick fix for now:
install busybox from market, install the git-version and then run the scripts again
that *should* fix it, unless I overlooked something.
What do you mean by git-version ?
EDIT : Nevermind. I'm re-doing the .bat
Well it worked like a charm ! Thank you ttxdragon, the installation was way faster than before and the fonts worked.
Quadrant score : 575 at the first boot, i'm rebooting atm
698 after !
i cant do it :S
it always says that any device had been found
Jonika21 said:
i cant do it :S
it always says that any device had been found
Click to expand...
Click to collapse
You need your phone to be turned on and USB Debugging also with of course the usb wire plugged to your phone.
If all of those things are done it should not display that.
debug mode... xD
problem solved
zyryck said:
What do you mean by git-version ?
EDIT : Nevermind. I'm re-doing the .bat
Well it worked like a charm ! Thank you ttxdragon, the installation was way faster than before and the fonts worked.
Quadrant score : 575 at the first boot, i'm rebooting atm
Click to expand...
Click to collapse
Glad it worked.
Uploaded v0.1 -- Now it should work even without installing busybox from market first.
I was being an idiot...
Thank you very much for this optimizer, works like a charm
Quadrant score - 699.
One question though. I used the v0.0, and I'm not a fun on the LCD Change, so I'd like to know if I just remove the file as stated in v0.1, will it make it 240 as before?
quadrant score - 673
nice work !
Yes, it would change the Density back. It'll do everything over again, including the JIT (in which step the density gets changed, too)
Glad it worked for you =)
you can simply download from market lcd density. you will find 3 programs, choose the free one, and change to 240..
i've done that, it worked
sorry my bad english xp
Welcome to Jaws-MIUI..
I'm just a newbie porter, i'm not a developer..credit goes to real developer out there in #htc-linux, special thanks to Dominues for "How to build an Android port", LeTama for telling me how to fix data connection and Atoore for FM Radio permission fix..
base on : MIUI 18-12-10
Kernel : Hastarin 8.5.3_eb oldcam
Whats working :
* 3g/HSDPA
* LED & keypad status notification
* Bluetooth
* USB mass storage
* G Sensor WORKING
* Facebook sync
* Camera/Camcorder
* Wifi
* GPS
* FM Radio
* Theme Manager
Whats not working:
----
if you have boot fail, PLEASE use data.img below (R3BrotherJr provided)
Download 18-12
Click Here Please
Download Data.img here
http://www.multiupload.com/7D1XQ9TJ4G thanks to R3BrotherJr
Patch1 : English Language Pack #1b thanks to markhuk from MIUI Dev forum
Click Here Please
Note..
If it boot up fine for you remember this :
Default DNS is my provider, please edit build.prop or use build.prop from old build and put it inside MIUI-Jaws folder
on first boot, go to setting - program - manage application - tab all, find launcher then clear data & force stop .. it will fix launcher
Ouch, i forget fix sdcard install app (like angry birds), do this by yourself..credit goes to rafpigna
Code:
- install terminal
- type this :
su
cd system/bin
ln -s toolbox newfs_msdos
reboot
try install angry bird without unmount sdcard
===================================================================
Older release..(don't use any patch below for new release)
Download 11-12 :
Click Here Please
Update Patch for fix Market FC (the new market seems didn't work)
Click Here Please
before applying market patch fix..install terminal then do this :
su
rm /system/app/vending.apk
=============================================================
Download 03-12 :
Click Here Please
Jaws-MIUI changelog..
Code:
Patch1 (language pack #1b)
- Mms string improvements.
- ThemeManager string improvements.
- Settings (Fixed Chinese in the personal passwords section) Thanks all who helped debug.
- Settings string improvements.
- Monitor string improvements, known bug, if you select one traffic set-up, and then set-up the other, entering the values and saving causes a FC, reloading the app does take the changes fine though.
- MiuiMusic string improvements.
- FileExplorer, fixed Chinese characters 'Bytes' shown in File Info. (thanks Keshav for the screen shot report). This involved editing Smali code.
18-12
- update to MIUI 18-12-10
- ironing out latest known bug from 11-12
11-12
- update to MIUI 11-12-10
- change SU binary, now root explorer work as it should
- delete su binary in rootfs.img
- fix installed sdcard app like angry bird (don't have to unmount sdcrad) thanks to rapigna..
RC1 :
- update to MIUI 03-12-10
- add wifi ad hoc support
- fix chinese character
- fix theme manager
- back to google dns number in build.prop
Patches :
1. For Fixing Boot Up error & Sensor Notification
Click Here Please
2. For enable logcat
Click Here Please
after applying the patch reboot, if theres reboot failure or boot loop, take off your battery put it back then boot android again..it should boot up fine..
otherwise backup your system.ext2 before applying the patch -- thanks to jamezelle and n_i_x from MIUI-Dev Forum
Extract those file and put this inside Jaws-MIUI-RC1 folder
3. For default MIUI fonts..
Click Here Please
Extrack this folder put it inside Jaws-MIUI-RC1/root/system/ (remember, fonts folder not the fonts self only, it will look like Jaws-MIUI-RC1/root/system/fonts)
NOTE
if u can't boot up my build and don't use above patch, please edit your startup.txt and change this line set cmdline "rel_path=Jaws-MIUI" to set cmdline "rel_path=Jaws-MIUI-RC1 nand_boot=0"
Tips..
Change battery icon to circle icon :
Download this Click Here Please thanks to Pendo from N1 Theme for a great MIUI theme (click his name for more status bar theme)
put this file inside Jaws-MIUI-RC1/root/system/framework/
reboot
================================================================
Old Jaws-MIUI base on RodrigezStyle..
Download :
Click Here please
mirror
Jaws-MIUI, base on RodrigeuzStyle 1.9.1 [Kernal: Hastarin 8.5.1]
PATCH : (only for Old Jaws-MIUI)
1. Wifi ad Hoc & build.prop Patch..
Click Here Please < ---- uploaded 12-2-2010:6:55 pm..fix wifi ad hoc
2. Fonts Chinese Character & Robo Voice Patch
Click Here Please
3. How to fix Theme Style
install terminal emulator, type this
Code:
$su
#busybox chown 0.0 /system/xbin/apply_theme
#busybox chmod 4755 /system/xbin/apply_theme
then reboot..apply theme
what is ad hoc? ad hoc is peer to peer connection between two wifi without the need of access point router, so u can use wireless tether on another android, and you can play remote control tools like ar.drone
READ THIS
i have set my own provider dns in build.prop file.. you must change it according to your own provider DNS, above patch make dns back to google DNS, i suggest you to edit it and find the right DNS according to your provider.. otherwise data / internet will not work
How to apply the patch : just extract root.rar file, put it inside Jaws-MIUI folder then boot to Jaws-MIUI..
ar.drone video
http://www.youtube.com/watch?v=CG5pqTWVahQ
Note..
1. I edit key map for Volume Down button as back menu..
to make it back to volume down, you must edit file qwerty.kl in /system/usr/keylayout find key 114 replace BACK with VOLUME_DOWN
or read this post by kawazaki
2. To fix white box in battery indicator, after first boot, go to setting - sytem- battery : change Battery indicator style to Percentage
Tips..
- install spare part from market..set all animation to fast..
- Wireless Tether apk.. Download Here
- Jaws-MIUI RodrigeuzStyle with Theme Manager is coming too..i'll upload it soon..
thanks to : Cotulla - for making all this possible, dan1j3l, LeTama, hastarin, huanyu, michyprima, Cass67, darkstone, ElbartoME, gauner1986, Geo411m, mattc, memin1857, NetRipper, MIUI-DEV, XDA-DEVELOPERS,MIUI.com (the Rom) and Rodrigeuz from N1 development..
Screen Shot
DONATION
screen shots pls..
sounds cool... some screen shots pls..
Just trying this build, and for me this is one of the best build i ever tried...
testing for a while, and so far everything works like charms...thanks lesjaw....
this is a few things that i found in this build...
Themes is fantastis
Mobile Network works like charms, for the very first time i can browsing without have to change anything, like ppp ect
Camera and Camcoder works perfect, green image or anything
Very Fast
CMIIW, but so far this build is already 99% english
There is no problem with scynch, either with time, or facebook contact (i have that problem before)
Screenshots are dead? just two "x"s ??
you said that 99% are in English.
Is it possible to make a build in another language? Or how to do that?
I'll download your build this evening to test it
mohasea said:
you said that 99% are in English.
Is it possible to make a build in another language? Or how to do that?
I'll download your build this evening to test it
Click to expand...
Click to collapse
what language do you want? it is possible but currently not so many language are avalaible..
I'm switching from MIUI free beer and woman 5/11 , ofcourse I can switch with my current data.img .
One thing is making me anxious, it's the battery.
How much does it consume on standby ? on MIUI 5/11 it shows 3-4 mA ..
It's almost better than in WinMo .. I will give this one a shot and I hope it satisfy my needs
Thank you for your effort
And everybody who contributed !
kawazaki said:
I'm switching from MIUI free beer and woman 5/11 , ofcourse I can switch with my current data.img .
One thing is making me anxious, it's the battery.
How much does it consume on standby ? on MIUI 5/11 it shows 3-4 mA ..
It's almost better than in WinMo .. I will give this one a shot and I hope it satisfy my needs
Thank you for your effort
And everybody who contributed !
Click to expand...
Click to collapse
usually i get around 5 ma in standby.. i have tweetdeck with FB and Twitter account sync for every 3 minutes, 3 Gmail account, i account is a high traffic mailist..almost hundreds to thousand emails a day..
in my experience most of MIUI build has the same battery consume on standby..
nice build.... very fast boot... great job
feedback(my view)
- wifi working
- battery is not showing percentage, showing a box inside circle
- animation between screens are not professional.
Do themes happen to work with this build?......
thank you for your build but why dont working the themes?
ree4mail said:
nice build.... very fast boot... great job
feedback(my view)
- wifi working
- battery is not showing percentage, showing a box inside circle
- animation between screens are not professional.
Click to expand...
Click to collapse
Personally, i love the battery icon in this build, especially when charging...
for percentage, u can download batteryindicator.apk from market...
but what do you mean by "animation between screens?"
downloading now
ree4mail said:
nice build.... very fast boot... great job
feedback(my view)
- wifi working
- battery is not showing percentage, showing a box inside circle
- animation between screens are not professional.
Click to expand...
Click to collapse
go to setting - system - battery change battery indicator style to percentage
Nor professional? wierd..
slimster said:
Do themes happen to work with this build?......
Click to expand...
Click to collapse
no..i'm sorry..all MIUI build cant do themes.. we must manually add it to framework-res.apk .. anyway this build is base on N1 RodrigezStyle which is modified enough.. i'm really sure if we can apply the theme it breaks the build..
thanks a lot for the build, downloading now. just one thing, is it possible to add custom icons in a MIUI build? cheers
hello,
how do i reduce volume while listening 2 music since the volume down button is edited as back menu button?
Thanks
going to check it out..
remap
can u explain the button remap thing again, what u said in the op wasnt clear to me.
thanks
GREAT work mate Downloadin as we speak.. LOVE the MIUI builds, and here is another one... BIG BIG thanx
StreakDroid 1.7.0 ( aka HD7 Edition ) Release Post
Official StreakDroid Website:StreakDroid.comhttp://streakdroid.com
I HAVE REMOVED FRING SUPPORT FROM THIS BUILD FROM NOW ON, IM SICK OF WASTING 2 DAYS FIXING THE FRAMEWORKS TO ALLOW FRING TO WORK, IF YOU WANT FRING SUPPORT GO COMPLAIN TO THEM (@FRING ON TWITTER ALSO)
This Release Version incorporates changes in the INSTALLATION PROCESS, please read the options available to you and the correct method of applying them before proceeding to flash the 1.7 Zip File!
( Disclaimer : As before, this ROM is heavily updated and still being developed at a fairly rapid pace. Bugs are listed below.)
PERFMOD IS NOT enabled by default in this version, had some reports of stabily problems but their is now an installer option to reenable it if you wish, if you choose not to enable the installer will automaticly trasfer your data back to save a reset
also lots of other little tweaks been added
1.0 > INSTALLATION CHANGES :
With 1.7, several choices must be made before flashing the Zip file via StreakMod or Clockwork Recovery. These choices are made with very simple edits to a Text file ( explained in section 1.2 below )
Important Options Available ( other options are listed below in Section 1.1 ) -
A.Rebel SIM Compatibility : Users who previously downloaded the NOBB version of the file may now simply select the option by typing it into the text file before flashing the Zip. Please note that Rebel SIM users are still required to manually Fastboot flash the 2.1 8105 Baseband for compatibility.
B.Launcher Option : Users may now select their default Launcher of choice before installation. The options available are LauncherPro, ADW, Stage UI and GingerBread Launcher. GingerBread launcher is installed by default if nothing is chosen.
C.Pixel/LCD Density : Default LCD Density can be set during Installation. Values available for selection are : 120,140,180,200 and 240 DPI.
D.Other Settings : Other settings available include -
•Volume Boost
( flashes the A Modified kernel with louder volume hack ),
•Tabmail
( installs the Galaxy Tab Email Client port beta 2 instead of stock email client ),
•Teetermod
( installs Teetermod edit to get HTC Teeter working, installs the app and a modified build prop with 240dpi lcd density )
•us120/140/180/200/240 -
(installs build.prop with USA related Region Settings and an LCD Density of 120140/180/200/240)
•bios
( installs the Streak BIOS Bootanimation )
•noapps
(this will install an absolute base system with no additional apps installed and the gingerbread launcher as the default launcher)
1.1 > INSTALLATION HOW TO
A. You will need to create a text file on your Streak's MicroSD Card. The file can be created in your Text Editor of choice ( such as Notepad ).
B.This file will be called 'install.txt' - Ensure that this is the exact syntax and that the file is saved with a '.txt' suffix.
C.This file must be saved in the root of the sd card.
E.Inside this text file, you may type each option that you select on a separate line. All the options available to you are listed below. Here is an example :
Code:
adwlauncher
volboost
tabmail
bios
That is it. You can save this text file as install.cfg
You will then boot into recovery ( StreakMod or Clockwork ) and begin the Zip file installation process as usual.
! The full list of Options available are as follows :
Code:
noapps - this will install an absolute base system with no additional apps installed and the gingerbread launcher as the default launcher
adwlauncher - this installs adw launcher and removes the default gingerbread launcher
launcherpro - this installs launcherpro and removes gingerbread launcher
stageui - this installs dells Stage UI and removes the gb launcher
density120 - sets lcd_density to 120 by default
density140 - sets lcd_density to 140 by default
density180 - sets lcd_density to 180 by default
density200 - sets lcd_density to 200 by default
density240 - sets lcd_density to 240 by default
transparent - restores the 1.5.3 transparent statusbar, which is partially disabled by default
nobaseband - installs the required libs for using a rebelsim
volboost - flashes a new super volume boost kernel
tabmail - installs the Galaxy Tab Email Client port beta 2 instead of stock email client
teetermod - installs teetermod edit to get htc teeter working, installs the app and a modified build prop with 240dpi lcd density
us120 - installs build.prop with usa related region settings (LCD Density of 120)
us140 - installs build.prop with usa related region settings (LCD Density of 140)
us160 - installs build.prop with usa related region settings (LCD Density of 160)
us180 - installs build.prop with usa related region settings (LCD Density of 180)
us200 - installs build.prop with usa related region settings (LCD Density of 200)
us240 - installs build.prop with usa related region settings (LCD Density of 240)
bios - installs the Streak BIOS Bootanimation thanks to Fone_Fanatic and Frysee
noswype - removes the preinstalled swype install to allow swype beta to work
zeam - installs the zeam launcher, a free open source launcher designed to be small and fast.
gbkb - installs Gingerbread keyboard instead of stock keyboard, this will cause force close in dictionary settings
perfmod - Enables the 1.6.1 Perfmod Option, disabled by default due to possible problems
stockphone - restores the stock phone/contacts apps rather than the new streak 7 versions
2.0 > OVERVIEW/SUMMARY OF INSTALLATION PROCESS
1.Download Update-1.7.0.zip from the links below
2.Place Zip file into Root of SD Card
3.Make a text file and type in the options you would like to chose as shown above.
4.Save file under SDCard>install.txt
5.Boot into StreakMod or Clockwork Recovery
6.Select Update from Zip File > Select Zip File From SD Card > StreakDroid_1-7.Zip
7.Wait for installation.
8.First Boot may take longer than a normal boot. Things are being installed, stuff is being generated. Patience.
9.Enjoy.
Most Recent Version: v1.7.0
Known Issues:
Accelerometer is dodgy at times but I cant pin down the issue - usually going into Settings > Display and toggling Auto Rotate on and off fixes
-----------------
Changelogs
-----------------
UPDATE 05/02/2011
Version 1.7.0 AKA HD7 Edition
• Replaced some aging libs and frameworks with new ones from dell 322 offical, probably fix some audio issues
• Fixed HDMI output (see note below)
• Added GScript
• Removed Perfmod by default due to some instability discovered
• Added New Keyboard and Langs from official 322 build
• Updated all apps to latest
• Fixed transparent notification bar to new icons etc
• Fixed kang-o-rama live wallpapers
• Updated stageui to version from streak 7 (no huge changes though)
• Slackerradio from streak 7 added
• Removed live wallpapers that are not full screen
• FRING FRONT FACING CAMERA SUPPORT HAS BEEN REMOVED PERMANENTLY, START ARGUING WITH FRINGS DEV IF YOU HAVE A PROBLEM WITH THIS
• Rebuilt theme from scratch, works better now, removed borked batt percentage,
• Changed fonts to much nicer looking one
• Added microbes live wallpaper
• Added fards tweaked libskia libs to fix some websites dying
• Hopefully vplayer is now fixed
• Facebook sync confirmed working
• Tweaked the browser and phone icons to match gb theme .
• Finally managed to fix the phone app in lcd densitys other than 160 - thanks to the dell streak 7 dump for this
• Added an auto transfer feature to move from 1.6.1 with perfmod to stock 170 without
• Reverted Some 3D Tweaks made in 1.6.x causing Gameloft games to fail
UPDATE 22/1/2011
Version 1.6.1 AKA ITS OVER 3 THOUSAND
• Updated libs to fix oovoo
• Updated volboost kernel to new version
• Fixed some installer issues
• Added gopus battery icon, modified colors
• Made settings > about > System Update work for updating streakdroid roms (yes you can check for updates direct from your streak
• Added a Noswype installer option to remove the preinstalled swype
• Added zeam launcher
• Fixed fc's in settings
• Added HEAVILY Tweaked Performance Mod data2ext Tweak, using just the streaks internal sd card now no need for changing things on external sd
• Added an option to install gingerbread keyboard instead of stock keyboard - dictionary settings force closes with gingerbread keyboard installed
• Added Live Wallpaper From Nexus S
UPDATE 10/1/2011
Version 1.6.0 AKA Install-o-Rama
• Added heavily modified advanced installer thanks to kang-o-rama mod for nexus one.
• Changed theme to add black statusbar due to transparancy issues
• Fring support available through installer
• Transparancy available through installer
• Changing lcd density available via installer
• Baseband/nobaseband via installer
• Re-enable old louder volume kernel
• Teetermod via installer
• Enable galaxy tab email client via installer
• USA region settings in build prop via installer
• New kernel with some perf changes, cfq reenabled
• Bios animation bootscreen chooseable via installer
NOTE: for HDMI to work you must run gscript and load the 2 files from your memory card (the rom will of created a gscript folder containingthem) then run the hdmi output on script before trying video, once you are done either reboot or run the hdmi off script
this is due to one of the performance tweaks interfering with hdmi
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
also please feel free to donate to my work if you find it useful - any amount is appreciated
GBP Donate | USD Donate
[/quote]
Rom Download Links:
Primary Download Site: http://mirror2.streakdroid.com/update-1.7.0.zip
Mirror 1: http://www.android-roms.com/downloads/upda...pdate-1.7.0.zip
Mirror 2: http://downloads.streakdroid.com/djsteve/update-1.7.0.zip
IT IS HIGHLY RECOMMENDED TO UPDATE TO THE BELOW BASEBAND FOR 1.5.1+
Baseband File Download:
Primary Download Site: http://downloads.streakdroid.com/djsteve/amss.mbn
Mirror 1: http://www.android-roms.com/downloads/updates/amss.mbn
Mirror 2: http://mirror2.streakdroid.com/amss.mbn
VPN USERS: TUN.KO IS INCLUDED IN THE ROM ALREADY - LOOK IN /SYSTEM/LIB/MODULES.
if you have NOT already flashed the dell 2.2 pkg or my 720p fix you need this to fix 720p video - otherwise ignore
http://downloads.streakdroid.com/testing/dsp1.mbn
flash this using the fastboot command fastboot -i 0x413c flash dsp1 dsp1.mbn
Thanks to:
Everyone for suggesting things they want adding
Kang-O-Rama Rom Maker for nexus one for allowing me to use his advanced installer
omca & xplanet hosting for providing additional mirrors
ALL the BETA testers who put up with multiple screwed up builds and multiple dell logo freezes to get this working, couldn of done it without you all
android-roms for the mirror
Vinokirk for helping diagnose and sort out 2.1 baseband ril support and gps
Andycap & fards for providing modified Gps.conf
homeiss forthe excellent upgrade/downgrade guide
everyone else for just jumping in and helping each other, thats the true community sprit that makes me do this sort of dev for android and not some other mobile os.
everyone else who helped/is helping
also please feel free to donate to my work if you find it useful - any amount is appreciated
GBP Donate | USD Donate
If a different density is selected, will we still got FCs like we do now? Meaning, has the ui been modified and scaled for different densitys?
Sent from my Dell Streak using XDA App
no, ive been looking at changing the dialer but any change kills the phone modem for some reason, still investigating
There is a folder named android already on my sd card do I use that one to put streakdroid?
Sent from the Iphone Killer
yea you can put folder into that
Why do I keep getting no download directory found? Nevermind I had the streak connected to the USB of my PC. DUH!
Sent from the Iphone Killer
if i leave out the lcd density will i get default settings?
I feel kindof stupid asking this but how do you turn on auto rotate with the gingerbread launcher? It seems to be stuck in landscape for me (everything else auto rotates).
Ok I installed 1.6.0 but I did not get the options to change anything. I created the folder android>streakdroid>install.cfg with text options. Nothing happened when does the option suppose to pop up? This is what I put in the text file below. Do I need to put code box?
adwlauncher
volboost
tabmail
bios
borijess said:
Ok I installed 1.6.0 but I did not get the options to change anything. I created the folder android>streakdroid>install.cfg with text options. Nothing happened when does the option suppose to pop up?
Click to expand...
Click to collapse
Those are your options...
I am so excited to try out all of the OPTIONS! Thank you DJ Steve! US local customization has never been easier. We are all so grateful of your releases. Kang-o-rama was always a fun mod on the Nexus One. Would like to see ADW EX installer as an option maybe in the future
Haz anyone ran through this install for 1.6 with the White BestBuy Dell Streak that originally started with the 6601 build? Or does that not matter anymore? I am currently on StreakDroid 1.4.6 with StreakMod 3.2.6-beta.
thanks i just used stageui in the txt & everything seems to work fine
Wow quadrant scores have increased without overclocking. I am getting 1700 was getting 1400 with 1.5.3
Nevermind for some reason the text file did not save in the folder.
I’m thoroughly confused. I set 240 density but everything is absolutely massive in size using the Gingerbread launcher. >.>
Shouldn’t higher density = more stuff on screen?
no you have it backwards, lower=higher resolution
Stupid question but is it possible to backport the Gingerbread sip stack to use the built in sip function in Gingerbread?
I get my streak tomorrow but I don't think that is likely with this snow storm on the east coast.
Well then, time for another reinstall.
Wow quadrant scores have increased without overclocking. I am getting 1700 was getting 1400 with 1.5.3
Click to expand...
Click to collapse
ive tryed a few times & im just getting 1560s not overclocked
I tried to load it, but when i choose what i want and select zip, nothing happened, ROM loaded, but in default settings, but thank you, great ROM.
StreakDroid 1.8.1 ( aka Bug Extermination Edition ) Release Post
Official StreakDroid Website:StreakDroid.comhttp://streakdroid.com
I HAVE REMOVED FRING SUPPORT FROM THIS BUILD FROM NOW ON, IM SICK OF WASTING 2 DAYS FIXING THE FRAMEWORKS TO ALLOW FRING TO WORK, IF YOU WANT FRING SUPPORT GO COMPLAIN TO THEM (@FRING ON TWITTER ALSO)
This Release Version incorporates changes in the INSTALLATION PROCESS, please read the options available to you and the correct method of applying them before proceeding to flash the 1.7 Zip File!
( Disclaimer : As before, this ROM is heavily updated and still being developed at a fairly rapid pace. Bugs are listed below.)
PERFMOD IS NOT enabled by default in this version, had some reports of stabily problems but their is now an installer option to reenable it if you wish, if you choose not to enable the installer will automaticly trasfer your data back to save a reset
also lots of other little tweaks been added
1.0 > INSTALLATION CHANGES :
With 1.8, several choices must be made before flashing the Zip file via StreakMod or Clockwork Recovery. These choices are made with very simple edits to a Text file ( explained in section 1.2 below )
Important Options Available ( other options are listed below in Section 1.1 ) -
A.Rebel SIM Compatibility : Users who previously downloaded the NOBB version of the file may now simply select the option by typing it into the text file before flashing the Zip. Please note that Rebel SIM users are still required to manually Fastboot flash the 2.1 8105 Baseband for compatibility.
B.Launcher Option : Users may now select their default Launcher of choice before installation. The options available are LauncherPro, ADW, Stage UI and GingerBread Launcher. GingerBread launcher is installed by default if nothing is chosen.
C.Pixel/LCD Density : Default LCD Density can be set during Installation. Values available for selection are : 120,140,180,200 and 240 DPI.
D.Other Settings : Other settings available include -
•Volume Boost
( flashes the A Modified kernel with louder volume hack ),
•Tabmail
( installs the Galaxy Tab Email Client port beta 2 instead of stock email client ),
•Teetermod
( installs Teetermod edit to get HTC Teeter working, installs the app and a modified build prop with 240dpi lcd density )
•us120/140/180/200/240 -
(installs build.prop with USA related Region Settings and an LCD Density of 120140/180/200/240)
•bios
( installs the Streak BIOS Bootanimation )
•noapps
(this will install an absolute base system with no additional apps installed and the gingerbread launcher as the default launcher)
1.1 > INSTALLATION HOW TO
A. You will need to create a text file on your Streak's MicroSD Card. The file can be created in your Text Editor of choice ( such as Notepad ).
B.This file will be called 'install.txt' - Ensure that this is the exact syntax and that the file is saved with a '.txt' suffix.
C.This file must be saved in the root of the sd card.
E.Inside this text file, you may type each option that you select on a separate line. All the options available to you are listed below. Here is an example :
Code:
adwlauncher
volboost
tabmail
bios
That is it. You can save this text file as install.txt
You will then boot into recovery ( StreakMod or Clockwork ) and begin the Zip file installation process as usual.
! The full list of Options available are as follows :
Code:
noapps - this will install an absolute base system with no additional apps installed and the gingerbread launcher as the default launcher
adwlauncher - this installs adw launcher and removes the default gingerbread launcher
launcherpro - this installs launcherpro and removes gingerbread launcher
stageui - this installs dells Stage UI and removes the gb launcher
density120 - sets lcd_density to 120 by default
density140 - sets lcd_density to 140 by default
density180 - sets lcd_density to 180 by default
density200 - sets lcd_density to 200 by default
density240 - sets lcd_density to 240 by default
transparent - restores the 1.5.3 transparent statusbar, which is partially disabled by default
nobaseband - installs the required libs for using a rebelsim
volboost - flashes a new super volume boost kernel - now with per page tables kgsl(3d) tweaks, may break gameloft games)
tabmail - installs the Galaxy Tab Email Client port beta 2 instead of stock email client
teetermod - installs teetermod edit to get htc teeter working, installs the app and a modified build prop with 240dpi lcd density
us120 - installs build.prop with usa related region settings (LCD Density of 120)
us140 - installs build.prop with usa related region settings (LCD Density of 140)
us160 - installs build.prop with usa related region settings (LCD Density of 160)
us180 - installs build.prop with usa related region settings (LCD Density of 180)
us200 - installs build.prop with usa related region settings (LCD Density of 200)
us240 - installs build.prop with usa related region settings (LCD Density of 240)
bios - installs the Streak BIOS Bootanimation thanks to Fone_Fanatic and Frysee
noswype - removes the preinstalled swype install to allow swype beta to work
zeam - installs the zeam launcher, a free open source launcher designed to be small and fast.
gbkb - installs Gingerbread keyboard instead of stock keyboard, this will cause force close in dictionary settings
perfmod - Enables the 1.6.1 Perfmod Option, disabled by default due to possible problems
novolnoppt - flashes a kernel without the new kgsl(3d) per page table support and normal volume levels - fixes some gameloft games
volnoppt - flashes a kernel without the new kgsl(3d) per page table support AND VOLUME BOOST - fixes some gameloft games
tabletphone - installs the modified dellstreak7 dialer, this causes a graphical bug in recent calls list but works fine
161font - restores the fonts from 1.6.1
2.0 > OVERVIEW/SUMMARY OF INSTALLATION PROCESS
1.Download update-1.8.1.zip from the links below
2.Place Zip file into Root of SD Card
3.Make a text file and type in the options you would like to chose as shown above.
4.Save file under SDCard>install.txt
5.Boot into StreakMod or Clockwork Recovery
6.Select Update from Zip File > Select Zip File From SD Card > update-1.8.0.Zip
7.Wait for installation.
8.First Boot may take longer than a normal boot. Things are being installed, stuff is being generated. Patience.
9.Enjoy.
Most Recent Version: v1.8.0
Known Issues:
Accelerometer is dodgy at times but I cant pin down the issue - usually going into Settings > Display and toggling Auto Rotate on and off fixes
-----------------
Changelogs
-----------------
UPDATE 23/02/2011
Version 1.8.1 AKA Bug Extermination Edition
• Reverted Some changes due to stability
• Reverted the 1.5ghz kernel due to issues with wifi.
UPDATE 23/02/2011
Version 1.8.0 AKA Chernobyl Meltdown Edition
• Reverted back to some of the older libs due to the random bugs
• Added honeycomb music player as default
• Tablet Phone App looks much nicer
• Updated honeycomb music
• Added new kernels and install options
• Added adhoc wifi support
• Added slight changes to statusbar
• Reverted to stock phone app due to issues with streak7 one, moved streak7 dialer to installer option instead, this has some graphical bugs but works fine
• Added new kernel with 1.5GHz Overclocking Ability !!!! - this may prove unstable so dont use permanently, 3d may also not work at full clock speed - not certain if it is actually overclocking to that speed either
• Added option to restore the fonts from 161 in installer
• Fixed the huge settings icons
UPDATE 05/02/2011
Version 1.7.0 AKA HD7 Edition
• Replaced some aging libs and frameworks with new ones from dell 322 offical, probably fix some audio issues
• Fixed HDMI output (see note below)
• Added GScript
• Removed Perfmod by default due to some instability discovered
• Added New Keyboard and Langs from official 322 build
• Updated all apps to latest
• Fixed transparent notification bar to new icons etc
• Fixed kang-o-rama live wallpapers
• Updated stageui to version from streak 7 (no huge changes though)
• Slackerradio from streak 7 added
• Removed live wallpapers that are not full screen
• FRING FRONT FACING CAMERA SUPPORT HAS BEEN REMOVED PERMANENTLY, START ARGUING WITH FRINGS DEV IF YOU HAVE A PROBLEM WITH THIS
• Rebuilt theme from scratch, works better now, removed borked batt percentage,
• Changed fonts to much nicer looking one
• Added microbes live wallpaper
• Added fards tweaked libskia libs to fix some websites dying
• Hopefully vplayer is now fixed
• Facebook sync confirmed working
• Tweaked the browser and phone icons to match gb theme .
• Finally managed to fix the phone app in lcd densitys other than 160 - thanks to the dell streak 7 dump for this
• Added an auto transfer feature to move from 1.6.1 with perfmod to stock 170 without
• Reverted Some 3D Tweaks made in 1.6.x causing Gameloft games to fail
UPDATE 22/1/2011
Version 1.6.1 AKA ITS OVER 3 THOUSAND
• Updated libs to fix oovoo
• Updated volboost kernel to new version
• Fixed some installer issues
• Added gopus battery icon, modified colors
• Made settings > about > System Update work for updating streakdroid roms (yes you can check for updates direct from your streak
• Added a Noswype installer option to remove the preinstalled swype
• Added zeam launcher
• Fixed fc's in settings
• Added HEAVILY Tweaked Performance Mod data2ext Tweak, using just the streaks internal sd card now no need for changing things on external sd
• Added an option to install gingerbread keyboard instead of stock keyboard - dictionary settings force closes with gingerbread keyboard installed
• Added Live Wallpaper From Nexus S
UPDATE 10/1/2011
Version 1.6.0 AKA Install-o-Rama
• Added heavily modified advanced installer thanks to kang-o-rama mod for nexus one.
• Changed theme to add black statusbar due to transparancy issues
• Fring support available through installer
• Transparancy available through installer
• Changing lcd density available via installer
• Baseband/nobaseband via installer
• Re-enable old louder volume kernel
• Teetermod via installer
• Enable galaxy tab email client via installer
• USA region settings in build prop via installer
• New kernel with some perf changes, cfq reenabled
• Bios animation bootscreen chooseable via installer
NOTE: for HDMI to work you must run gscript and load the 2 files from your memory card (the rom will of created a gscript folder containingthem) then run the hdmi output on script before trying video, once you are done either reboot or run the hdmi off script
this is due to one of the performance tweaks interfering with hdmi
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
also please feel free to donate to my work if you find it useful - any amount is appreciated
GBP Donate | USD Donate
[/quote]
Rom Download Links:
Primary Download Site: http://mirror2.streakdroid.com/update-1.8.1.zip
Mirror 1: http://downloads.streakdroid.com/djsteve/update-1.8.1.zip
IT IS HIGHLY RECOMMENDED TO UPDATE TO THE BELOW BASEBAND FOR 1.5.1+
Baseband File Download:
Primary Download Site: http://downloads.streakdroid.com/djsteve/amss.mbn
Mirror 1: http://mirror2.streakdroid.com/amss.mbn
VPN USERS: TUN.KO IS INCLUDED IN THE ROM ALREADY - LOOK IN /SYSTEM/LIB/MODULES.
if you have NOT already flashed the dell 2.2 pkg or my 720p fix you need this to fix 720p video - otherwise ignore
http://downloads.streakdroid.com/testing/dsp1.mbn
flash this using the fastboot command fastboot -i 0x413c flash dsp1 dsp1.mbn
Thanks to:
Everyone for suggesting things they want adding
Kang-O-Rama Rom Maker for nexus one for allowing me to use his advanced installer
omca & xplanet hosting for providing additional mirrors
ALL the BETA testers who put up with multiple screwed up builds and multiple dell logo freezes to get this working, couldn of done it without you all
android-roms for the mirror
Vinokirk for helping diagnose and sort out 2.1 baseband ril support and gps
Andycap & fards for providing modified Gps.conf
homeiss forthe excellent upgrade/downgrade guide
everyone else for just jumping in and helping each other, thats the true community sprit that makes me do this sort of dev for android and not some other mobile os.
everyone else who helped/is helping
ALL THE TESTERS DESERVE HUGE THANKS FOR THEIR HELP EVERYONE !!
also please feel free to donate to my work if you find it useful - any amount is appreciated
GBP Donate | USD Donate
Currently on 1.7.1 Beta ver6. Downloading 1.8.0 FINAL right now.
DJ Steve you are a star. Downloading right now. When are we getting the honey comb that you have been teasing us about
wen i get sources, no point releasing a build that has nothing useful working
GiRARDsays said:
Currently on 1.7.1 Beta ver6. Downloading 1.8.0 FINAL right now.
Click to expand...
Click to collapse
Just flashed 1.8.0. Haven't noticed much difference between this final release and the beta I was on prior.
good job steve.i wont flash 1.8.0 yet because i just finished installing my apps on 1.7.0. but i'm sure is same as good as 1.7.0.cheers!
Thanks Steve.
What happened to 1.7Ghz performance?
Sent from my Dell Streak using XDA App
just so you know steve the build number says 1.7.0 when installing through streakmod
jvc.silence said:
good job steve.i wont flash 1.8.0 yet because i just finished installing my apps on 1.7.0. but i'm sure is same as good as 1.7.0.cheers!
Click to expand...
Click to collapse
You can flash it right over 1.7.0. No need to factory reset, therefore you won't lose apps or settings.
GiRARDsays said:
You can flash it right over 1.7.0. No need to factory reset, therefore you won't lose apps or settings.
Click to expand...
Click to collapse
How would i do this?
raymando said:
How would i do this?
Click to expand...
Click to collapse
I just flashed over 1.7. Just go into clockwork or streakmod and flash the zip. I wont erase your settings or apps.
raymando said:
How would i do this?
Click to expand...
Click to collapse
Download the new zip for 1.8.0 and save it to your SD card. Read the new install options and update your "install.txt" file if necessary. Then go into recovery, either StreakMod or Clockwork, then flash it just like how you did 1.7.0.
Dumb question but what do these exactly do? In english terms please. Will all of us need this? How will it help me?
novolnoppt - flashes a kernel without the new kgsl(3d) per page table support and normal volume levels - fixes some gameloft games
volnoppt - flashes a kernel without the new kgsl(3d) per page table support AND VOLUME BOOST - fixes some gameloft games
borijess said:
Dumb question but what do these exactly do? In english terms please. Will all of us need this? How will it help me?
novolnoppt - flashes a kernel without the new kgsl(3d) per page table support and normal volume levels - fixes some gameloft games
volnoppt - flashes a kernel without the new kgsl(3d) per page table support AND VOLUME BOOST - fixes some gameloft games
Click to expand...
Click to collapse
It's really only relevant if you play Gameloft Games on your phone. If you do, choose the 1st one if you want volboost. If you don't play Gameloft games, don't worry about it.
i cant get this too load for the life of me. I wipe everything. had the install.txt file on the root of the sd. Im now trying with out the install.txt file. I get to the lock screen and it freezes.
Hellzya said:
i cant get this too load for the life of me. I wipe everything. had the install.txt file on the root of the sd. Im now trying with out the install.txt file. I get to the lock screen and it freezes.
Click to expand...
Click to collapse
Hmmm. Are you doing a fresh install or are you flashing over an older version? If you're flashing over an older version, which one is it?
Im doing a fresh install coming from 318 with perf mod. Ive tryed it without the install.txt and without.
My icons are really small, Why?
1.8.0 won't boot
1.7.0==>1.8.0 Stayed at stopped boot screen (Android Scribble Red) 30 minutes. Rebooted and now it wont get more than 1/3 through the boot screen before it locks. Cleared Cache and Dalvik. Still won't go.
Heading back to a very stable 1.7.0 till tonight. Hope it will go back!
I flashed 1.8 over 1.7 no problems.
Sent from the Almighty Streak 1.7.0
StreakDroid 1.9.0 ( aka The Final Frontier ) Release Post
Official StreakDroid Website:StreakDroid.comhttp://streakdroid.com
FRING VIDEO CALLING DOES WORK ON THIS VERSION USING THE FRING BETA AVAILABLE FROM FRING (ALSO AVAILABLE ON MODACO)
A FACTORY RESET MAY BE NEEDED TO ALLOW THIS TO BOOT CORRECTLY DUE TO THE NUMBER OF CHANGES, SO BACKUP IS RECOMMENDED
This Release Version incorporates changes in the INSTALLATION PROCESS, please read the options available to you and the correct method of applying them before proceeding to flash the 1.9 Zip File!
( Disclaimer : As before, this ROM is heavily updated and still being developed at a fairly rapid pace. Bugs are listed below.)
PERFMOD IS NOT enabled by default in this version, had some reports of stabily problems but their is now an installer option to reenable it if you wish, if you choose not to enable the installer will automaticly trasfer your data back to save a reset
also lots of other little tweaks been added
1.0 > INSTALLATION CHANGES :
With 1.9, several choices must be made before flashing the Zip file via StreakMod or Clockwork Recovery. These choices are made with very simple edits to a Text file ( explained in section 1.2 below )
Important Options Available ( other options are listed below in Section 1.1 ) -
A.Rebel SIM Compatibility : Users who previously downloaded the NOBB version of the file may now simply select the option by typing it into the text file before flashing the Zip. Please note that Rebel SIM users are still required to manually Fastboot flash the 2.1 8105 Baseband for compatibility.
B.Launcher Option : Users may now select their default Launcher of choice before installation. The options available are LauncherPro, ADW, Stage UI and GingerBread Launcher. GingerBread launcher is installed by default if nothing is chosen.
C.Pixel/LCD Density : Default LCD Density can be set during Installation. Values available for selection are : 120,140,180,200 and 240 DPI.
D.Other Settings : Other settings available include -
•Volume Boost
( flashes the A Modified kernel with louder volume hack ),
•Tabmail
( installs the Galaxy Tab Email Client port beta 2 instead of stock email client ),
•Teetermod
( installs Teetermod edit to get HTC Teeter working, installs the app and a modified build prop with 240dpi lcd density )
•us120/140/180/200/240 -
(installs build.prop with USA related Region Settings and an LCD Density of 120140/180/200/240)
•bios
( installs the Streak BIOS Bootanimation )
•noapps
(this will install an absolute base system with no additional apps installed and the gingerbread launcher as the default launcher)
1.1 > INSTALLATION HOW TO
A. You will need to create a text file on your Streak's MicroSD Card. The file can be created in your Text Editor of choice ( such as Notepad ).
B.This file will be called 'install.txt' - Ensure that this is the exact syntax and that the file is saved with a '.txt' suffix.
C.This file must be saved in the root of the sd card.
E.Inside this text file, you may type each option that you select on a separate line. All the options available to you are listed below. Here is an example :
Code:
adwlauncher
volboost
tabmail
bios
That is it. You can save this text file as install.txt
You will then boot into recovery ( StreakMod or Clockwork ) and begin the Zip file installation process as usual.
! The full list of Options available are as follows :
Code:
noapps - this will install an absolute base system with no additional apps installed and the gingerbread launcher as the default launcher
adwlauncher - this installs adw launcher and removes the default gingerbread launcher
launcherpro - this installs launcherpro and removes gingerbread launcher
stageui - this installs dells Stage UI and removes the gb launcher
density120 - sets lcd_density to 120 by default
density140 - sets lcd_density to 140 by default
density180 - sets lcd_density to 180 by default
density200 - sets lcd_density to 200 by default
density240 - sets lcd_density to 240 by default
nobaseband - installs the required libs for using a rebelsim
volboost - flashes a new super volume boost kernel - now with per page tables kgsl(3d) tweaks, may break gameloft games)
tabmail - installs the Galaxy Tab Email Client port beta 2 instead of stock email client
teetermod - installs teetermod edit to get htc teeter working, installs the app and a modified build prop with 240dpi lcd density
us120 - installs build.prop with usa related region settings (LCD Density of 120)
us140 - installs build.prop with usa related region settings (LCD Density of 140)
us160 - installs build.prop with usa related region settings (LCD Density of 160)
us180 - installs build.prop with usa related region settings (LCD Density of 180)
us200 - installs build.prop with usa related region settings (LCD Density of 200)
us240 - installs build.prop with usa related region settings (LCD Density of 240)
bios - installs the Streak BIOS Bootanimation thanks to Fone_Fanatic and Frysee
noswype - removes the preinstalled swype install to allow swype beta to work
zeam - installs the zeam launcher, a free open source launcher designed to be small and fast.
gbkb - installs Gingerbread keyboard instead of stock keyboard, this will cause force close in dictionary settings
perfmod - Enables the 1.6.1 Perfmod Option, disabled by default due to possible problems
novolnoppt - flashes a kernel without the new kgsl(3d) per page table support and normal volume levels - fixes some gameloft games
volnoppt - flashes a kernel without the new kgsl(3d) per page table support AND VOLUME BOOST - fixes some gameloft games
tabletphone - installs the modified dellstreak7 dialer, this causes a graphical bug in recent calls list but works fine
161font - restores the fonts from 1.6.1
2.0 > OVERVIEW/SUMMARY OF INSTALLATION PROCESS
1.Download update-1.9.0.zip from the links below
2.Place Zip file into Root of SD Card
3.Make a text file and type in the options you would like to chose as shown above.
4.Save file under SDCard>install.txt
5.Boot into StreakMod or Clockwork Recovery
6.Select Update from Zip File > Select Zip File From SD Card > update-1.8.0.Zip
7.Wait for installation.
8.First Boot may take longer than a normal boot. Things are being installed, stuff is being generated. Patience.
9.Enjoy.
Most Recent Version: v1.9.0
Known Issues:
Accelerometer is dodgy at times but I cant pin down the issue - usually going into Settings > Display and toggling Auto Rotate on and off fixes
-----------------
Changelogs
-----------------
UPDATE 22/03/2011
Version 1.9.0 AKA The Final Frontier
rebased off combination of dell 318/319/322/341 and 345 libs and frameworks 2.2.2 dell files
fixed the stock dialer
reverted stagefright libs to fix flash issues
added fards modified Skia and SkiaGL librarys to fix random browser crashes on certain sites
removed transparent install option, will readd for next one depending on demand
added auto zipalign script, FIRST BOOT WILL take some time
fixed an issue with some market apps not appearing
UPDATE 23/02/2011
Version 1.8.1 AKA Bug Extermination Edition
• Reverted Some changes due to stability
• Reverted the 1.5ghz kernel due to issues with wifi.
UPDATE 23/02/2011
Version 1.8.0 AKA Chernobyl Meltdown Edition
• Reverted back to some of the older libs due to the random bugs
• Added honeycomb music player as default
• Tablet Phone App looks much nicer
• Updated honeycomb music
• Added new kernels and install options
• Added adhoc wifi support
• Added slight changes to statusbar
• Reverted to stock phone app due to issues with streak7 one, moved streak7 dialer to installer option instead, this has some graphical bugs but works fine
• Added new kernel with 1.5GHz Overclocking Ability !!!! - this may prove unstable so dont use permanently, 3d may also not work at full clock speed - not certain if it is actually overclocking to that speed either
• Added option to restore the fonts from 161 in installer
• Fixed the huge settings icons
UPDATE 05/02/2011
Version 1.7.0 AKA HD7 Edition
• Replaced some aging libs and frameworks with new ones from dell 322 offical, probably fix some audio issues
• Fixed HDMI output (see note below)
• Added GScript
• Removed Perfmod by default due to some instability discovered
• Added New Keyboard and Langs from official 322 build
• Updated all apps to latest
• Fixed transparent notification bar to new icons etc
• Fixed kang-o-rama live wallpapers
• Updated stageui to version from streak 7 (no huge changes though)
• Slackerradio from streak 7 added
• Removed live wallpapers that are not full screen
• FRING FRONT FACING CAMERA SUPPORT HAS BEEN REMOVED PERMANENTLY, START ARGUING WITH FRINGS DEV IF YOU HAVE A PROBLEM WITH THIS
• Rebuilt theme from scratch, works better now, removed borked batt percentage,
• Changed fonts to much nicer looking one
• Added microbes live wallpaper
• Added fards tweaked libskia libs to fix some websites dying
• Hopefully vplayer is now fixed
• Facebook sync confirmed working
• Tweaked the browser and phone icons to match gb theme .
• Finally managed to fix the phone app in lcd densitys other than 160 - thanks to the dell streak 7 dump for this
• Added an auto transfer feature to move from 1.6.1 with perfmod to stock 170 without
• Reverted Some 3D Tweaks made in 1.6.x causing Gameloft games to fail
UPDATE 22/1/2011
Version 1.6.1 AKA ITS OVER 3 THOUSAND
• Updated libs to fix oovoo
• Updated volboost kernel to new version
• Fixed some installer issues
• Added gopus battery icon, modified colors
• Made settings > about > System Update work for updating streakdroid roms (yes you can check for updates direct from your streak
• Added a Noswype installer option to remove the preinstalled swype
• Added zeam launcher
• Fixed fc's in settings
• Added HEAVILY Tweaked Performance Mod data2ext Tweak, using just the streaks internal sd card now no need for changing things on external sd
• Added an option to install gingerbread keyboard instead of stock keyboard - dictionary settings force closes with gingerbread keyboard installed
• Added Live Wallpaper From Nexus S
UPDATE 10/1/2011
Version 1.6.0 AKA Install-o-Rama
• Added heavily modified advanced installer thanks to kang-o-rama mod for nexus one.
• Changed theme to add black statusbar due to transparancy issues
• Fring support available through installer
• Transparancy available through installer
• Changing lcd density available via installer
• Baseband/nobaseband via installer
• Re-enable old louder volume kernel
• Teetermod via installer
• Enable galaxy tab email client via installer
• USA region settings in build prop via installer
• New kernel with some perf changes, cfq reenabled
• Bios animation bootscreen chooseable via installer
NOTE: for HDMI to work you must run gscript and load the 2 files from your memory card (the rom will of created a gscript folder containingthem) then run the hdmi output on script before trying video, once you are done either reboot or run the hdmi off script
this is due to one of the performance tweaks interfering with hdmi
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
also please feel free to donate to my work if you find it useful - any amount is appreciated
GBP Donate | USD Donate
[/quote]
Rom Download Links:
Primary Download Site: http://mirror2.streakdroid.com/update-1.9.0.zip
Mirror 1: http://downloads.streakdroid.com/djsteve/update-1.9.0.zip
Mirror 2: http://www.thatpcshop.com/update-1.9.0.zip
Mirror 3: http://www.rdtk.net/files/update-1.9.0.zip
Mirror 4: http://www.filesonic.com/file/323673314/update-1.9.0.zip
Mirror 5: http://combe15.livedrive.com/files/23880661
Emergency Mirror 1: http://rapidshare.com/#!download|917l35|453835366|update-1.9.0.zip|202197
Emergency Mirror 2: http://rapidshare.com/#!download|331dt|453836152|update-1.9.0.zip|202197
Emergency Mirror 3: http://www.multiupload.com/TAUYEAQMD2
IT IS HIGHLY RECOMMENDED TO UPDATE TO THE BELOW BASEBAND FOR 1.5.1+
Baseband File Download:
Primary Download Site: http://downloads.streakdroid.com/djsteve/amss.mbn
Mirror 1: http://mirror2.streakdroid.com/amss.mbn
VPN USERS: TUN.KO IS INCLUDED IN THE ROM ALREADY - LOOK IN /SYSTEM/LIB/MODULES.
if you have NOT already flashed the dell 2.2 pkg or my 720p fix you need this to fix 720p video - otherwise ignore
http://downloads.streakdroid.com/testing/dsp1.mbn
flash this using the fastboot command fastboot -i 0x413c flash dsp1 dsp1.mbn
Thanks to:
Everyone for suggesting things they want adding
Kang-O-Rama Rom Maker for nexus one for allowing me to use his advanced installer
omca & xplanet hosting for providing additional mirrors
ALL the BETA testers who put up with multiple screwed up builds and multiple dell logo freezes to get this working, couldn of done it without you all
android-roms for the mirror
Vinokirk for helping diagnose and sort out 2.1 baseband ril support and gps
Andycap & fards for providing modified Gps.conf
homeiss forthe excellent upgrade/downgrade guide
everyone else for just jumping in and helping each other, thats the true community sprit that makes me do this sort of dev for android and not some other mobile os.
everyone else who helped/is helping
ALL THE TESTERS DESERVE HUGE THANKS FOR THEIR HELP EVERYONE !!
also please feel free to donate to my work if you find it useful - any amount is appreciated
GBP Donate | USD Donate
Sweet,thank you for new build, waiting for download and try it.
A Big Thanks to DJSteve and his Beta testers!
Using the following install.txt and running great! Will play around more and try other configs.
stageui ( Nice upgrade and Faster than Stock 345 )
perfmod
volboost
tabmail
us180
Scored 1989 on it's 1st Quadrant run.
Update: Still running solid and not a single reboot. Not sure why others are having issues. Try wiping your data and clearing the cache before flashing. I always do.
Update2: 36 Hours later and still going great!
Thank's my friend for you hard work!
Sent from my Dell Streak using XDA Premium App
Thanks for the update you are the man will be donating soon
Sent from my Dell Streak using XDA Premium App
is stageui the new one thats in the 2.2.2 build?
yep it is ..........
Your the man
Thanks a lot Steve for all the hard work you've put into all this. I've been using streakdroid since before it was even named. Ha. Without your hard work I doubt I would have been able to make it through AT&T and all their "instead of 2.1 were just doing 2.2...." BS lol.
well ya anyways thanksss
p.s. And remember haters gonna hate, don't trip
Woohoo! Will install and try tonight. Looks like it is time for another donation!
Sent from my Dell Streak using XDA Premium App
Thanks Steve. Great work as usual. Heres hoping for 2.0 based on cyanogenmod 7.
Sent from my Dell Streak using XDA App
we will see, 2.0 may be HC
Mmmmm. Honeycomb goodness. I feel a donation coming on
Sent from my Dell Streak using XDA App
ive already said i am gonna get honeycomb on streak somehow
yep it is ..........
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
got to love the new stage
just flash it and see...
i get only 805 with my 2.2.2 official
yep hence the streakdroid name having two meanings
edit:
im aware that the servers are taking a hammering now, getting some more mirrors up as i type. if possible download from mirror2.streakdroid.com not downloads.streakdroid as the downloads server is having issues currently
35mmslr said:
Thanks Steve. Great work as usual. Heres hoping for 2.0 based on cyanogenmod 7.
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
I agree totally with you..cyanogenmod ROCKS..
gutted i get with stage 1571
but 1710 with launcherpro
im going to stick with launcherpro
stage sucks big time for performance
Ive found 1.7.0 a bit too sluggish at time. Lets see if this is any better .