Hi, my Xperia X10 mini pro is completely dead, it won't turn on, no led turns on when i put it on the charger or connect to the computer. My computer doesn't recognize it, and nothing appears on the screen.
Is there something i can do to ?
Flash tool nor SEUS recognize him, I really don't know what to do.
Can you tell us a little about the history of bricking?
How did it happen, what did you do with the device...
Yesterday I installed MiniCM7 Pro v20, and everything went right, all functions were on and smooth. Today I was installing some apps, and I left them installing, later when I went to see if everything was ready, i found my cellphone turned off. I thought that my battery has been drained, so i put it to recharge, but after 3 hours nothing appeared on my phone. I've already tested my battery with a multimeter, and so the problem isn't in the battery.
I guess this is all.
It could be your usb lead, may be try another.
Sent from my U20i using xda premium
What is happening with SEUS? You do press the back button while connecting the usb cable and nothing happens? It says that you have the latest software installed and there is no option to install again??
Well isn't the usb i've tried another one, from sony ericsson and still not working. When i tri to connect to SEUS it simply doesn't recognize the cellphone even though i'm pressing the back button.
You said you tested the battery with a multimeter, what was the voltage across the terminals? It may show a charge but still be incapable of booting the phone, however, the voltage may be too low to accept a recharge (lipoly batteries have a safety cutout to prevent charging a discharged batter as they tend to blow up - it could be as much as 3v in some circumstances.) I think sony ericsson read 0% at 3200mv or there abouts and 100% at 4200mv.
If your battery is below 3v then you will need a new one.
Sent from my U20i using Tapatalk
Well you said your battery had drained, and IIRC, lithium-ion batteries don't take too well being drained so that might have killed it.
Have you tried plugging a charger into it and leaving for roughly 20 hours?
Well it appeared 3V, but the precision were set so that i couldn't see the number after the dot, i mean, i don't know the "x" in 3.x V
And it is on the charger right now, i'll wait the 20 hours. Hopping it comes back tomorrow.
gustavo.momente said:
Well it appeared 3V, but the precision were set so that i couldn't see the number after the dot, i mean, i don't know the "x" in 3.x V
And it is on the charger right now, i'll wait the 20 hours. Hopping it comes back tomorrow.
Click to expand...
Click to collapse
I have had this problem before, but I waited roughly 20 hours and voila! My phone came back from the dead and now it's working better than ever
Hope your phone will do just as well ^^
I'm really hopping too
Well, unfortunately 20 hours has been passed and nothing changed on the cellphone, is there anything more to do ?
The flash tool that you have tried is the one from Bin4ry?
If not try it, that worked for me as i un-bricked my phone after months of waiting for such tool.
Pay attention to the instructions because some details are tricky
http://forum.xda-developers.com/showthread.php?t=825664
fandroidus said:
The flash tool that you have tried is the one from Bin4ry?
If not try it, that worked for me as i un-bricked my phone after months of waiting for such tool.
Pay attention to the instructions because some details are tricky
http://forum.xda-developers.com/showthread.php?t=825664
Click to expand...
Click to collapse
Well, the one form the link that you sended isn't working anymore.
I used this one: http://forum.xda-developers.com/showthread.php?p=10738467
gustavo.momente said:
Well, the one form the link that you sended isn't working anymore.
I used this one: http://forum.xda-developers.com/showthread.php?p=10738467
Click to expand...
Click to collapse
Oke i found the link: http://www.multiupload.com/7H4JT35B6G
go give it a try and send feedback...
Well, I send my cellphone to the manufacturer today, so I may not try this =/
Thanks everyone for the help.
i've got the same problem. now i hate my xperia mini pro.... maybe samsung will heal my wound................
with speaker there is cover remove it and there is a place.place the needle in it for 1minute and then reply me
I had the same problem. I tried some key combinations like "Power + Back" or "Power + Menu" and it didn't work, but when I tried "Power + Home" the phone came back alive!
Related
Hi there.
Got my X10 bricked.
How that happened:
Yesterday put my phone on vibrate/silent mode, shile was at cinema. Battery was about 15%. Later on I ffound that phone is off, thought it happened because of low battery. When I got home I've putted it on charge. Red light flashed few times. After about 2 hours I looked at it and no light was there. Phone didn't turn on. Took battery from another X10 (fully charged) and nothing happened. Tried to connect it to PC to reflash it, but no green LED appeared and PC told me, that unrecognized device found. After few PC restards even this disappeared. Just silence. None of buttons pressing configurations helped.
Tried with no SIM and SD cards. No change.
I have latest ROM on it and xRecovery.
Any ideas of what I could do?
hey dude one thing for ya.. you can never brick your x10 its not those old phones it a computer based/linux phone.. If you go through the forums you can find the info of how to unbrick x10 .. try Pc companion or go to sony website and try SEUS( Sony Ericsson Update service) it'll fix your phone up.ill do my best to post a link for ya if i can find it soon
here u go dude. read through this link and you'll fix your phone..
http://forum.xda-developers.com/showthread.php?t=828398
Thanks. But thing is that phone doesn't go in flash mode. No green LED is on. On first try I got "unrecognized device" from XP, now it's just silent on phone connection.
i think its more in hardware related because as far as i know eh you cant brick your phone. and battery drainage is far related to bricking..so i guess its a hardware problem..maybe you sat on it or something..because bricking is moreon software related.
try this
*remove the battery
*plugin charger to your x10
*hold the power button while inserting your battery.
just give it a shot..
It was in my wifes bag while that happened, but she has her phone just beside mine, so not shure it was because of some pressing on it or whatever.
Tried what you told me - no result. Tried pressing/holding power bttn before, while and after battery insertion.
Again, there was red LED at first, when I've plugged in charger yesterday, but later on it disappeared. I've charged my battery on another phone. Now it nearly full.
Try all solutions before u send ur phone for repair. I had to send my in to ATT and they said it was probably a hardware issue. So i hate to say that but i had the same thing. Sorry to tell u that my friend.that red light is a killer.
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
got a similar problem.
my x10 will only vibrate and the led blinks green, but the phone won't start.
tries SEUS, pc companion, pc suite, flash tool. nothing helped.
any suggestions?
Well, mine won't even vibrate.
Voelker45, so you got replacement or they repaired your phone? Could you tell me wich part it was?
I bought my phone on ebay, so no way to send it back. And it was in August 2011, so anyway, I have to work that thing myself.
MsnSazabi said:
Well, mine won't even vibrate.
Voelker45, so you got replacement or they repaired your phone? Could you tell me wich part it was?
I bought my phone on ebay, so no way to send it back. And it was in August 2011, so anyway, I have to work that thing myself.
Click to expand...
Click to collapse
Just PMed u back
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
Install SEUS and run it. Select x10 and it will install drivers on your phone. Then plug in your phone and try to repair.
As I wrote before, x10 does not enters flash mode, so no way to reflash.
And looks like it's really hardware issue. Something with powering.
Ok, thanks everyone. Since I bought it on ebay and it would be unreal to send it back to seller and we don't have SE service centers here, I'll fight for my phone till the end)))
Maybe something from this thread will help http://forum.xda-developers.com/showthread.php?t=944322
Sent from my X10i using Tapatalk
Thanks, G-FACE.
Strange thing happened:
Connected x10 to charger without battery. No LED turned on. Left it for a few mins, pluged in battery. No result. Took usb plug out and ! phone turned on. As it was without SIM cars, I turn it off, took battery out, putted SIM in, battery in and... again, it's not turning on. Tried repeating that way - nothing. Must be some hardware connection problem near battery. Will disassemble phone tomorrow.
MsnSazabi said:
Thanks, G-FACE.
Strange thing happened:
Connected x10 to charger without battery. No LED turned on. Left it for a few mins, pluged in battery. No result. Took usb plug out and ! phone turned on. As it was without SIM cars, I turn it off, took battery out, putted SIM in, battery in and... again, it's not turning on. Tried repeating that way - nothing. Must be some hardware connection problem near battery. Will disassemble phone tomorrow.
Click to expand...
Click to collapse
Please take photos if u find the problem and when u fix it. If u can of course. Not many photos go up of inside the x10 for those members who r way too curious. Lol
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
Me again)
Strange things keep happen.
Here is the story:
Finally, got some star shaped screws yesterday and took apart my phone (thnx to McKebapp).
Non of IC were with readable names) So later on, after few hours of serching I found Xperia X10 scheme files (!!!). So the most probable faulty part would be Qualcomm PM7540 - power distribution IC.
Anyway, it was to hard for me to understand all that stuff in scheme, so I gave up(.
Assembled my phone back again. And just to... em.... have it done, lets say, I took out battery, pluged X10 in charger, pluged battery in. But it doesn't turned on again. So I took USB plug out abd - tadaaa - screen lightened.
Waited till phone loaded, turned it off again, pluged SIM and SD cards in, turned it on again - and it did! It turned on!
So, night passed and it still works.
Btw, yesterday I've rebooted it few times and it still was ok.
I don't know what was the problem, it could be bad contact, but there is no wires between battery and power distributing IC.
Anyway, X10 is back again)
my beloved xperia just decided one fyn morning to die.....the only sign of life it shows is the red led when the power button is pressed. back+home+power doesnt help,and it refuses to go into flash mode{back+usb connection}
tried 2 charge da battery externally, but the battery is fairly charged,i guess....hey,what is correct polarity for charging the li-polymer battery,btw??
somebody please help..... screen is completely blank.
tusharacid said:
my beloved xperia just decided one fyn morning to die.....the only sign of life it shows is the red led when the power button is pressed. back+home+power doesnt help,and it refuses to go into flash mode{back+usb connection}
tried 2 charge da battery externally, but the battery is fairly charged,i guess....hey,what is correct polarity for charging the li-polymer battery,btw??
somebody please help..... screen is completely blank.
Click to expand...
Click to collapse
Maybe try with xrecovery to see if it can communicate with your phone??
Have you tried charging from a PC/Wall normally for half an hour ?
i had the same problem my solution was too: put in the wall charger for a half an hour(even if it dont wanna charg) and then i used SEUS(sony ericsson update service) i press the back button for like 4 minits or so when i connected the phone. and suddenly it whent flashing.
hope it helps you
somebody said to me it is the sony ericsson repair method.
[SOL]
1. Download Update Service From Sony Ericsson Website
2. Then , Follow the steps in update service
3. u Can Recovery phone in 2.1 Update
Dude i think you phone battery got deep-discharged....So all you have to do is to charge your phone by adapter charger (for at least 12 hours)...
Follow The Instructions Below-:
1.Connect The adapter to the phone...(don't try to switch it on,from anyways)
2.Let the phone Charge till 12 hours
3.Unplug the Charger and connect the phone with PC and use SEUS to Reinstall a fresh ROM.
martintspedersen said:
i had the same problem my solution was too: put in the wall charger for a half an hour(even if it dont wanna charg) and then i used SEUS(sony ericsson update service) i press the back button for like 4 minits or so when i connected the phone. and suddenly it whent flashing.
hope it helps you
somebody said to me it is the sony ericsson repair method.
Click to expand...
Click to collapse
no response @ all..... now even da red led is gone.phone is totally dead. and yeah my battery is fine as it worked in another xperia mini.wt do i do now
hariskar said:
Maybe try with xrecovery to see if it can communicate with your phone??
Click to expand...
Click to collapse
is there a desktop version of xrecovery....can u plz give the download link.
do a hardware reset.
press the power button and home button (center) dont release until you feel a vibrate
same thing happened to me a week ago. hardware reset did the job
tusharacid said:
is there a desktop version of xrecovery....can u plz give the download link.
Click to expand...
Click to collapse
Dude there is no such thing like Desktop xRecovery so don't be a day dreamer....Pls take a look on this thread..it might set ur problem up!!!
http://forum.xda-developers.com/showthread.php?t=981935
PaulitoX77 said:
do a hardware reset.
press the power button and home button (center) dont release until you feel a vibrate
same thing happened to me a week ago. hardware reset did the job
Click to expand...
Click to collapse
been holding till my fingers strtd screaming , NO RESPONSE from phone.
remove battery and try reconnecting it (you should be able doing that witout removing any screw)
if no result disconnect it again and connect to an ac/dc adapter @3V for half an hour
pay attention to the polarity (+/-)
teardown instructions
http://www.ifixit.com/Teardown/Sony-Ericsson-Xperia-X10-Mini-E10i-Teardown/3124/1
reassemble and hopefully your problem will be solved
Gx3 said:
remove battery and try reconnecting it
if no result disconnect it again and connect to an ac/dc adapter @3V for half an hour
pay attention to the polarity (+/-)
teardown instructions
reassemble and hopefully your problem will be solved
Click to expand...
Click to collapse
already done thT brodA......NO response still.....im gonna be skinned alive
any other way???{plz dont ask me 2 tk it 2 da repair centre}
tusharacid said:
already done thT brodA......NO response still.....im gonna be skinned alive
any other way???{plz dont ask me 2 tk it 2 da repair centre}
Click to expand...
Click to collapse
looks like an hardware fault... i think you have done everithing possible...
seus, DCcharging, flasher, ,
hope you can find other answers
good luck and up for you
Try a Hardware reset first, then connect to System and via SEUS reset the phone to 2.1
Dude as i said you before try the below linked Thread...it might help...just give it a try.
http://forum.xda-developers.com/showthread.php?t=981935
For the further queries i'll be there for you....
I have exactly the same problem .. try a long time but nothing ...is dead...
Maybe you didn't have battery left to try to solve the problem and therefore it is always red without charging if there is a problem, if you connect the phone by usb to the computer and the phone doesn't start or charge then it really is a problem. Try to use the Sony Update Service, download it, then you just have to select your model on the program and it will tell you to press the Back Button on the phone and then connect it with usb (still holding the back button), this will bring the phone to it's original state (Stock Android) and back to life.
tusharacid said:
my beloved xperia just decided one fyn morning to die.....the only sign of life it shows is the red led when the power button is pressed. back+home+power doesnt help,and it refuses to go into flash mode{back+usb connection}
tried 2 charge da battery externally, but the battery is fairly charged,i guess....hey,what is correct polarity for charging the li-polymer battery,btw??
somebody please help..... screen is completely blank.
Click to expand...
Click to collapse
simply use SEUS to restore stock ROM and kernel.so long as your computer can recognise the device when connected .
Hi all,
yesterday I used an emergency method for the second time which saved my phone even when SEUS doesn't respond. Please note:
1. This is an emergency method, if ALL other methods fail. If you are not comfortable with this, then don't do it.
2. I don't know if this works for the new Mini or either Pros.
3. You can damage your phone if you do this incorrectly, so take care, and you do this at your own risk.
4. If you are still in warranty, this can void your warranty if they detect what you've done.
5. If you're VERY new to all this phone modification stuff, you probably shouldn't do this. But, if you are new and all other methods don't work, then you can try this if you don't want to/can't afford to send away to repair.
Still in trouble? This is ESPECIALLY useful if your phone won't switch on, SEUS won't detect it and charging doesn't show LED. Do this:
1. Take off the back cover.
2. To the left of the camer lens is a rubber part covering the phone. At first, it looks like it won't move, but use something small and thin (like a pin or tack) to gently lift that up, and take it away. You need this so keep it.
3. Inside you will see a small white connector. This connects the battery to the rest of the phone. Use a tack or pin to gently pull back on the white part. When it does get loose, lift up.
4. After a few seconds, put that white connector back. I do it by laying it down and pushing in with the pin/tack, and push down. You must hear it click. Be very, very careful with this, it's delicate!
5. Put back the rubber connector and case.
Try switch on your phone now. Twice, this has helped me when ALL else failed...
**When you take off the rubber cover to the left of the lens, you will see this white tab as you can see in this picture. You use a pin/tack to drag that back, then press down again and push it into the phone to reconnect. This resets it.**
I have used this on the 2010 Mini, and I don't know about the 2011 Mini or either pros...
phoneyericsson said:
Hi all,
yesterday I used an emergency method for the second time which saved my phone even when SEUS doesn't respond. Please note:
[...]
Try switch on your phone now. Twice, this has helped me when ALL else failed...
Click to expand...
Click to collapse
can i add a link to this in my FAQ?
Thanks for the recovery solution!
Will check this method if my mini dont respond in future
Sent from my X10miniCM 2.1.1
matmutant said:
can i add a link to this in my FAQ?
Click to expand...
Click to collapse
Sure!
Honestly, this method has worked twice now (only needed it twice) and if the phone doesn't switch on, PC/laptop/SEUS don't detect it/no LED or anything...this STILL works...! It's a kind of hard reset we need, if soft reset (home and power) don't work.
can anyone confirm whether this works on the pro yet ?
tomvanoppens said:
can anyone confirm whether this works on the pro yet ?
Click to expand...
Click to collapse
If I understand it, this disconnects the battery from the phone. On the mini-pro you can just pull the battery.
Sent from my U20i using Tapatalk
Yes, that's right ^^ on the Mini of 2010 you cannot disconnect the battery like normal. This is how you can do it, and it really does fix many of the worst kinds of problems...it re-starts the connection of the phone.
Still not working ;(
i tried this method twice, and nothing happened...
my phone was working fine yesterday, woke up, found it turned off.
i tried to charge it, and it showed no signs of charging, no LED lights, no heat, nothing.
i tried to restart it using the power+home+back buttons, i tried to get it on flash mode, nothing worked.
its still off and NOT charging even though its been connected to the charger for like 2 hrs
anymore ideas?
Hi buddy.
There's something different with these smartphones. This happened to my Mini also. I contacted Sony Eric. and they said make sure your battery doesn't die completely. You must leave it charging in the wall for about 2 hours and wait for an LED (green) to show. If that doesn't work, then I'd try SEUS and repair the phone. If that doesn't work, then I'd try this solution. It really should be the LAST thing you do - if you're not very familiar with this you can break it.
And you tried this method and it did nothing? Really? You disconnected the white wire, waited 10 seconds and reconnected? Then I'd try charging for 2 hours WITHOUT trying to turn it on.
help me plzzzzzzzzzz
Hi!
can anyone help me!
i treied to root my x10 mini pro and something fail
Idont know what happen but i fowlloed the guid but i know that was my wrong i dont know what happend.
My x10 mini pro are breaked now when i try to turn it on it came just SONEY ERICSSON just it, itreied to uppdate by pc.companion but i could not uppdate it becuse the program didnot finde the device.
Can someone help me please.
Tanks!
That is common and you should be able to fix it. If all you did was try to root it, I'm not quite sure what failed. This happens sometimes if you try to put a new operating system (ROM) on the device but something goes wrong.
And PC companion doesn't detect your device?
If not...there is another Sony Ericsson program called SEUS (Sony Ericsson Update Companion). Use that instead and tell it to repair your phone. To do so, you connect your phone to the PC, press the power button at the top of the phone AND the middle (menu) button on the front together...then your phone resets. If you have SEUS ready, it will connect your phone, your phone won't boot, SEUS will repair it. The light at the top of the phone will be green if this is working correctly.
Hi, i just bought bricked x10 mini for 20 bucks. I has no sign of life, no led indicator, etc. It's not detected by seus. I also disassembly it to check physical damage( i didn't find any damages).
Phone just won't turn on. Lets check if 2hours charging is working for my case.
Yes, try the charging thing. Sony Ericsson told me to do this by email. I had no idea that smartphones worked like that, but yes. It could have life but not show for 2 hours of charging. (They said DON'T try to turn on the phone while it's trying to charge in this case).
If none of that works then try more extreme methods, like the one I mention with the white cable.
Good luck!
still no luck with charging solution. actualy i've disassembly it so practically i have done your solution. i will go check more deeper about the problem. the worst case is IC failure.
Thank you for the tip phoneyericsson!
I didn't find it hard to do -- I pulled off the ruber thing with a nail, and tweaked out the plug with some small scissors.
I was stuck at the SE logo, and couldn't turn of my phone or enter CWR. I wanted to set it back to standard using SEUS. Instead of using the method mentioned in option 2 here, I simply pulled the white plug to the battery, which turned of the phone. Then I inserted it again and the phone stayed off. Then I simply did as SEUS asked, and now I'm back running, ready to get CMmini on my device again!
That's great to hear! ^^
Greetings!
This isn't the first time my X10 stops working, but most of the times simple SEUS or flashtool flash fixed everything. But this time it's diferent, that's why I'm asking for help.
For the whole previous week my phone was playing with me. Random reboots, power button stopping to work, taking the phone out of the pocket just to see it turned off and such. This is how it reacts now:
1. Trying to turn it on: Green LED flashes for a split second and then the phone vibrates and that's it. No reaction. If I leave it then, green LED flashes for a split second from time to time. Have to reinsert the battery to make it 'react' again.
2. Trying to use SEUS: It detects the phone alright, the phone seems to enter flash mode, but the status bar doesn't even start filling. After some time I just get the message that the flashing failed.
3. Trying to use flashtool: Pretty much the same: status bar doesn't move, and after some time 'Flashing failed'.
4. Plugging it into wall charger or usb: Green LED lights up like in flash mode for 5 secs, then turns off, then lights up again and alternates like that every 5 seconds or so.
Any suggestions? I was on Wolf's V6 rom, locked bootloader, and my warranty ended like 5 months ago. Pretty sticky situtation. I'd really like to revive it without the need to bring it to repair or something. Eagerly waiting for every reply.
Thanks in advance!
Bump!
Please anybody!
probly cos of dead battery
I would say it was most probably because of your battery is ****ed, your battery connecting pins are screwed, or something gotta do with hardware.
Try leaving the phone on charge for at least 2 hours to see if that fixes it.
Or try to "Jump" start your battery.
I have read how to do this in a thread somewhere...i think by omegared...try and search for it
U can use external battery chargers to charge your battery. Or you can borrow it from someone for few hours
CheersS!
Milton --> From X10i on ROM : "ThGo2 v10. 0 beta1"
using XDA premium
Thanks for all the replies, I really appreciate that!
>pheel
I kinda suspected my battery would be faulty. I remember I dropped it accidentaly around the time it stopped working. The fall won't be over 50cm, but I guess it was still fatal...
>gregbradley
After it stopped working, I left it plugged into wall charger overnight. Had just green led flashing and still no boot. Jump starting seems to be something I don't wanna mess with
>milton.bain
Don't really have access to any of these items, but I guess I'll try to get it from somewhere.
Ok then..
just buy a new battery then
if you want to check before you pay, find a friend with a working x10 and borrow theirs...
Noone I know owns a X10, but someone I know works at the place I bought my phone, so I'll try to borrow a battery from there for a few moments.
some of the symptoms of your phone indicates that it might be a motherboard problem.
the best suggestion is that you try out another battery in your phone, and see if it will act the same. if it is, have it checked, it might be hardware.
Hi all,
It seems my X10 mini pro is bricked.
Briefly: When I turn on the phone, it vibrates. About 8 seconds llater, the screen lights up, but doesn't show anything, then goes dark again. It then keeps repeating this: once in a while, the screen lights up, but shows nothing, and then goes dark again.
When plugged in to charge, the LED light doesn't come on (and actually hadn't for a while when charging, even though the phone was still working).
I've deleted all the contents of the SD card and updated the firmware with SEUS and PC Companion; both don't come up with any errors and claim everything has been installed, but there is no change in the phone's behavior. Also tried to install the French stock ROM (the only link that seems to work in the Flashtool+ROM thread) using Flashtool, but to no avail.
Does anyone have any other sugggestions?
I was wondering whether it could actually be a battery problem, as I've had some issues with charging the phone for a while before this happened; e.g. the LED didn't work when charging, and on more and more occasions the phone didn't seem to charge when plugged in. Could this be caused by a problem with the battery? (Have ordered a new one from ebay, so will see what happens when it arrives.) I'm not aware that I did anything unusual with the phone software-wise that could have caused it to be bricked. (Phone was rooted, but I did that ages ago.)
Many thanks for your help!
could be the battery going bad since you mentioned you have it ages ago or so. or could be the cable as well.
demoniacs said:
could be the battery going bad since you mentioned you have it ages ago or so. or could be the cable as well.
Click to expand...
Click to collapse
I've had it for about 15 months. Is it normal for the battery to go after that amount of time?
Which cable do you mean?
i cannot really tell about the battery but the usb cable for your charger.
Ok, it's not the battery. I tried it in a shop with one of their batteries, which worked in their phone, and the phone still won't turn on.
Is there anyone who thinks it could still be a software issue?
Otherwise it seems my options are to send off the phone, which might cost a bit, or to start digging around in the phone myself for a bit. I found a disassembly guide online, but it scares me a bit, since the first step seems to be to lift off the keyboard, and I'm a bit worried about damaging it and about how to put it back. Has anyone else here got any experience with taking their X10 mini pro apart?
Thanks!
Charging issues etc are nornally to do with the dodgy USB port in the phone. Try wiggling the cable at the port end see if you can get it to charge then try a SEUS
Sent from my X10 Mini Pro using xda premium
No, it wasn't a charging issue.
Took it to be fixed, and it turned out it was the cable inside that connects the screen etc to the low part of the screen.
Now that the phone is working again, I've got to figure out how to get rid of the French keyboard layout that I got onto it when trying to fix the firmware ...
Why not flashing mine in my signature, it's QWERTY! ;-)
Sent from my MT11i using xda premium