Just tried watching a movie on my phone on the girlfriend's tv and got nothing... it's really annoying me now too.
-Plugged hdmi into each of the 4 ports on the tv in case was a bad port
-Tried 2 different phone chargers into a power strip AND tried extension cord from wall (nothing was open directly in the wall)
**Got nothing from those steps**
-Plugged adapter in to pc monitor with hdmi input and charger directly to wall, got picture
-Plugged hdmi into dvd player to test the tv, got picture
My first thought is the charger isn't getting a good connection to the powerstrip because the plug in front of it kinda prevents it from going in all the way - HOWEVER the phone does receive power and charged through it.
But that's why I tried an extension cord right off the wall, so not sure what it could be.
Does the TV have to be newer and support an mhl adapter? I thought you had MHL which required the TV to support AND then there was the adapter that worked with all hdmi (thus it being an adapter).
Related
I just found a MHL cable for the SGS2 on Amazon with Micro-USB to HDMI.
I have a Samsung HDTV bought about a year ago. Now i know that MHL means you can charge as well as view the phone stuff on the screen but MHL TVs have not released yet (i think, and even if they have i wont be getting one anytime soon).
So my question is can i still see the TV out if i use the MHL cable on my older TV? I know it definitely wont charge.
Anyone?? :S
yes you can.
all you need is the adapter from MHL (micro-USB) to HDMI, connect the HDMI to the TV and you are good to go.
the advantage of the original samsung adapter is the ability to connect a power cable to the adaptor and charge the phone while it transmits the picture to the TV.
hope i helped
Thanks mate
For anyone confused, an MHL cable is a Micro USB to HDMI cable - no ifs, no buts, this will transmit HDMI from a compatible MHL port. Nothing else needed (except I believe it must also be connected to power)
Your micro USB port on the bottom of your SGS2 is an MHL/USB port, and will therefore work.
Important to note is that not all micro USB ports are also MHL ports, therefore will not necessarily work on some other micro USB port on a different phone.
Hi guys, i bought the MHL adapter from T-Mobile's website for the Sensation 4G (i have an Evo 3D). I set everything up, plugging the MHL adapter into my phone, standard HDMI into the adapter and TV, and the usb cable into the adapter...
After plugging everything in nothing happens. I even tried playing a video and nothing occurred. How do i activate the video out? Do i just have a bad MHL adapter?
A few questions. Does the battery icon on the phone show it is charging? This means that power is going to the adapter and to the phone. If not, try changing power adapters. If the charging icon is there, then try changing HDMI cables. If this doesn't work, you might have a bad MHL to HDMI adapter.
with your tv off, plug your mhl adapter into your phone, plug your power cable into the adapter, turn your tv on and bam! (note that the hdmi doesnt display the lockscreen)
Rydah805 said:
with your tv off, plug your mhl adapter into your phone, plug your power cable into the adapter, turn your tv on and bam! (note that the hdmi doesnt display the lockscreen)
Click to expand...
Click to collapse
My lockscreen shows and boot animation , Also to OP ...the hdmi mirroring is not as stable as HDMWIN is for the OG Evo imo, i had to play with it a bit to first get a picture on my Sammy (unplug/replug/reboot etc.)...then i got pic without sound (OG worked w/audio), ended up running hdmi through my Yamaha amp and that worked. Still not as stable as my 4g evo....LAME
btw I've read usb can't be plugged into pc for powering, must be plugged into wall adapter
louforgiveno said:
btw I've read usb can't be plugged into pc for powering, must be plugged into wall adapter
Click to expand...
Click to collapse
my macbook pro powers it fine. weird.
I was using it with my stand that had a video on/off button to turn the display on an off. Everything was mirrored fine but I had no audio and hulu was intentionally shutting off the hdmi before any video played. Are they blocking media streaming apps from displaying through the mhl adapter? Oh an i powered mine by pluging it into my ps3.
Eat it iPhone said:
Hi guys, i bought the MHL adapter from T-Mobile's website for the Sensation 4G (i have an Evo 3D). I set everything up, plugging the MHL adapter into my phone, standard HDMI into the adapter and TV, and the usb cable into the adapter...
After plugging everything in nothing happens. I even tried playing a video and nothing occurred. How do i activate the video out? Do i just have a bad MHL adapter?
Click to expand...
Click to collapse
Funny that you ask this. I just got an MHL adapter off of Amazon that was just the adapter itself (micro USB one end, female HDMI on the other).
I connected the HDMI cable to my TV and MHL adapter, then I connected my MHL adapter to my phone. Last but not least, I connected my power adapter directly to the MHL adapter and my phone started charging.
The input should be immediate from your phone but if it doesn't, check the following:
1. Make sure your TV is on and the input is selected for the proper HDMI port. If nothing is detected, the TV should report that it's receiving no signal.
2. Make sure the power cable is plugged into your MHL adapter. From my experience, it will not push out the HDMI signal without external power.
3. From my experience, you have to connect your phone to the MHL adapter LAST. NOt sure why but if everything else checks out fine and your phone still isn't pushing out a signal, reconnect the phone to the MHL adapter. You should get an HDMI icon on your top bar.
I have the EVO3D stock.
Everything works fine for me (pictures, music, video) except Netflix. For some reason Netflix looks extremely pixellated. Not quite sure why when everything else looks fine.
Picked up the mhl converter at a T-Mobile shop, grabbed 6' of hdmi cable, hooked up the phone to my newest tv, and "no signal" bounced all over the screen.
Mocking me.
Hdmi 1
Hdmi 2
Hdmi 3
Nope, zippo.
Dead USB? No, the USB>TV worked for pictures and file browsing.
Faulty MHL adapter? No way of knowing.
Dead HDMI TV inputs? All 3 on a 2 week old tv? Possible.
I called technical, and they were stumped as well.
I have 2 units, and neither worked.
Am I missing something?
Operator error is not unfamiliar to me.
Thank you.
Plug the mhl to power and tv first. Plug the phone last
Double0EK said:
Plug the mhl to power and tv first. Plug the phone last
Click to expand...
Click to collapse
Tried it, no luck.
I tested mine out to see if I could re-create a no signal and the olny way I did was when I set the signal to HDMI on the tv first, then plugged in the mhl. I guess it needs to have that signal there first to pick it up. Anything else I tried, different configurations of plugging in worked.
Does your mhl have a micro usb plug to charge as well as the hdmi plug? I have a generic one off ebay that has the short micro usb pigtail for plugging in your wall charger into the mhl and also a short pigtail for the hdmi plug. I have read a couple people were having problems with the one that's hdmi out only
Well, I solved the first problem.
Thank you everyone that assisted.
Now my only problem is that I paid real money for the kit.
I do not advise purchasing.
The output is horrendous.
I tried my vids/pics, youtube...no netflix yet...everything was pixelrama.
It should have raised flags that not only tmo tech, but 3 stores in the area are completely unfamiliar due to nobody buying them or trying them personally.
Hi guys,
I've just got Motorola webtop travel adaptor for my Razr, it is working well, webtop mode can be launched.
However, my OTG cable cannot work over this travel adaptor even with Y-usb cables with power supply (not worked with mouse,keyboard, usb drives).
I've tried without the travel adaptor, the OTG cable is working well with Y-usb cables with power supply.
Can anyone help?
I Believe the port on the adapter is for charging only.
In the HD Station I think it internal OTA goes to a 4 port hub with the webtop enabler hooked to one of the ports and the other 3 out the back.
So you'd need to plug your OTA into the phone, have they power y cable and hub. Then'd you'd need to make a cable to plug the adapter into the hub. which would take to much work.
On my setup I bought an attrix dock on amazon for $30 and a microusb extension from usbfirewire.com for around $8-$11 and just plugged the HDMI from the phone directly into the tv.
1st.BrainStormer said:
I Believe the port on the adapter is for charging only.
In the HD Station I think it internal OTA goes to a 4 port hub with the webtop enabler hooked to one of the ports and the other 3 out the back.
So you'd need to plug your OTA into the phone, have they power y cable and hub. Then'd you'd need to make a cable to plug the adapter into the hub. which would take to much work.
On my setup I bought an attrix dock on amazon for $30 and a microusb extension from usbfirewire.com for around $8-$11 and just plugged the HDMI from the phone directly into the tv.
Click to expand...
Click to collapse
I would love to see picture of your setup.
Here's a picture of my setup.
In photo:
Atrix Dock
MicroUSB Extension
MicroUSB HDMI Cable
Multi Card Reader
Logictech C910 Webcam. (Takes place of display side camera)
heh, stupid work IPhone took the picture upside down
1st.BrainStormer said:
Here's a picture of my setup.
In photo:
Atrix Dock
MicroUSB Extension
MicroUSB HDMI Cable
Multi Card Reader
Logictech C910 Webcam. (Takes place of display side camera)
heh, stupid work IPhone took the picture upside down
Click to expand...
Click to collapse
I like the idea. I am looking to do it for my self.
I just hooked up one of those Volans MHL to HDMI converter boxes. I connected to the TV but when I plugged in the power, the charge indicator on the Tablet flashed on an off and so did the TV picture. I rebooted everything and made sure I tried an isolated USB power supply. I disconnected the HDMI cable to make sure it wasn't an issue with the tv but the power still flashed on and off.
Any ideas? Anyone had success with this? If it looks like a faulty unit, I'll just get another but if it is a design fault, I'll look elsewhere.
Thanks