My USB Mount only works on Villainrom now.. - Galaxy S II Q&A, Help & Troubleshooting

Hey so I've been using Villainrom happily for a while now but recently tried out cyanogenmod which worked fine except for no USB mount. I figured it was just the rom and went back to Villainrom, USB working fine again.
With ICS themes being available to checkrom and batista roms, I gave them a go and found that USB Mount doesn't work on these either
I'm back on Villainrom 3.0 now after downloading PC drivers from google, samsung, and just about every source mentioned on XDA + search engines plus installing Kies and (almost considered going back to stock everything with Odin) no luck. The error message is USB Device malfunctioned in a big balloon message on the trey.
The phone will charge but not recognize a USB device being attached for mounting, tried turning debugging on and off, and starting USB from wifi.
Not a big deal as I can mount USB Now on VillainRom. But I'm super curious as to why none of the other roms are working for me
I have the original USB cable as well as another third party one. For some reason my laptop responds better to the third party one so I've always used that, tried both but no results.
Specs:
Windows 7 64 samsung laptop
Samsung Galaxy S2
Baseband: 19100XXKI1
Kernel: [email protected] #20
Build: VillainRom 3.0
Phone made in Korea, imported to New Zealand, currently operating in Korea
Any suggestions appreciated

XXKI1 is my baseband... could that be the problem?

Cool, if anyone comes here looking for help with Samsung MTP Device not working, uninstall ALL of your USB drivers and reboot. solved

Related

[Q] USB Device Not Recognized

So I was hoping some of you guys could help me out.
Recently my Vibrant started to give me trouble with my computer. But it's only my vibrant with my computer. I can connect to any other computer no problem. Any other device is easily recognized by my computer except the vibrant.
It started after using PDANET's tethering app. I was at one point tethering all the time putting my phone in usb debugging mode and running pdanet on my computer. Then I also started using the bluetooth tethering. Once I finally got internet at my new place i stopped using the tethering option. But then I realized when i tried to get files off my phone my computer wouldnt recognized my phone anymore.
The error I get is
USB Device Not Recognized.
One of the usb devices on this computer has malfunctioned and windows does not recognized it.
Usb Root Hub Unknown device.
Try Reconnecting the device if windows still does not recognized it replace the device.
In the device manager the properties of the "unknown device" says
Status: Windows has stopped this device because it has reported problems. (Code 43)
I've tried the solution posted under here
USB Fix - Win7 x64 - USB Device not Recognized
and I've used both drivers from Samsung Kies and here
[Drivers] MS Windows x86 and x64 USB Drivers for Samsung Galaxy S
(Sorry can't post links apparently)
When I try to update the driver manually for the unknown device it says that it has already selected the best driver for the device. So i don't know if it really updated it.
Any Suggestions would be really helpful. Thanks!
espy1988 said:
So I was hoping some of you guys could help me out.
Recently my Vibrant started to give me trouble with my computer. But it's only my vibrant with my computer. I can connect to any other computer no problem. Any other device is easily recognized by my computer except the vibrant.
It started after using PDANET's tethering app. I was at one point tethering all the time putting my phone in usb debugging mode and running pdanet on my computer. Then I also started using the bluetooth tethering. Once I finally got internet at my new place i stopped using the tethering option. But then I realized when i tried to get files off my phone my computer wouldnt recognized my phone anymore.
The error I get is
USB Device Not Recognized.
One of the usb devices on this computer has malfunctioned and windows does not recognized it.
Usb Root Hub Unknown device.
Try Reconnecting the device if windows still does not recognized it replace the device.
In the device manager the properties of the "unknown device" says
Status: Windows has stopped this device because it has reported problems. (Code 43)
I've tried the solution posted under here
USB Fix - Win7 x64 - USB Device not Recognized
and I've used both drivers from Samsung Kies and here
[Drivers] MS Windows x86 and x64 USB Drivers for Samsung Galaxy S
(Sorry can't post links apparently)
When I try to update the driver manually for the unknown device it says that it has already selected the best driver for the device. So i don't know if it really updated it.
Any Suggestions would be really helpful. Thanks!
Click to expand...
Click to collapse
I have the same problem on my PC. I would plug in the phone and my mouse would stop working. No tethering app installed or anything.
Anyway, I just tried the ports on the back of the PC and those worked. Try a port closer to the MB
I've tried all my ports. It's still not recognized.
Check the cable and power source. Be sure cable is with good quality. I hade the same issue. I fixed it with original HTC cable and back panel USB from my deskop computer. Front USB of desktop computers often are not enough to power that consumption.
After updating to Froyo it started working again. Thanks though. I still have no clue what caused it.
Bumping to confirm, I found this thread after getting the same error. I had tried several of the USB ports on my computer but after reading this tried the 2 I hadn't yet, they both worked. Not sure why only those work now, but they do work.
Hope this helps someone.
I have a bricked galaxy s which doesn't do anything. Windows 7 reconizes an unknown device and it's not possible to install the samsung driver. Windows says that it allready has the right driver.
I can't seems to reincarnate my galaxy s. Only this small sign of live in windows 7.
It happened when I was flashing 2.3.5 and the connection went down just seconds after the start of flashing so I guess the bootloaders are corrupt.
Anyone any idea how to solve this one?
Vibrant UnBrickable Mod
The same thing is happening to my Vibrant. Tried Rooting and installing various ROMs and it is still "Not Recognized". Tried all ports on all PCs (4) and Laptops (1) and non of them work. espy1988, how did you upgrade to Froyo 2.2 if you could not connect to PC and Kies? This used to work without an issue.
Thanks
Tombias said:
I have a bricked galaxy s which doesn't do anything. Windows 7 reconizes an unknown device and it's not possible to install the samsung driver. Windows says that it allready has the right driver.
I can't seems to reincarnate my galaxy s. Only this small sign of live in windows 7.
It happened when I was flashing 2.3.5 and the connection went down just seconds after the start of flashing so I guess the bootloaders are corrupt.
Anyone any idea how to solve this one?
Click to expand...
Click to collapse
Like said above u might need to be debricked.
seems like ur phone is hard bricked.
---------- Post added at 04:33 AM ---------- Previous post was at 04:26 AM ----------
have u tried Odin back to stock using Odin or hemidal ?
I have the same problem now. I have had my Vibrant for over a year never with an issue. I have Odined it back to JFD dozens of times but now it will not recognize the usb device.
I have GB bootloaders, but never a problem before. When changing Roms I usually Odin back to JFD first and start clean.
My problem started with the phone getting stuck in landscape mode. I was running a 2.3.4 GB rom Sensation. I reflashed a few times but whenever a restored anything from Titanium it would revert back to landscape only. I decided to go back to a 2.2 rom and plugged in the phone to Odin and it was not recognized, also not as a mass storage device, no go. I used Samba to copy a 2.2 rom, Trigger, to the phone and flashed from there. The phone is good now except the computer still won't recognize it. I can use Samba to access the SDCard but I hate not being able to use Odin if things go south. Tried all usb ports and a new cable, no go. Really wierd.
Looking for suggestions......
If you're still under warranty claim it & send it.
Had same problem. There is no fix short of replacing USB port.
I found my problem. It was dirty/corroded usb port. I carefully cleaned it out (took a few times) and it's all functioning again. I also cleaned the contacts on my original usb cord and it is working again also.
I'm just now having this problem for the first time. I've tried all USB ports and cleaning the port on the phone with no luck so far. Can someone point me to the unbrickable mod mentioned early in this thread?
jnusz said:
I'm just now having this problem for the first time. I've tried all USB ports and cleaning the port on the phone with no luck so far. Can someone point me to the unbrickable mod mentioned early in this thread?
Click to expand...
Click to collapse
Have you tried installing the installing/re-installing the Samsung drivers (LINK), using another USB cable, or even another computer? I just want to make sure you've tried it all before attempting to do a hardware mod.
Anyhow, you can find a link to the unbrickable mod and other hardware mods in the "Official XDA Vibrant Bible Thread", under the "MODS/SCRIPTS" section (LINK).
Mine is the cable btw. My wife has a GSII and I was able to use her cable.

[Q] Computer acts like Vibrant isn't plugged in

Please forgive me if I've missed a post somewhere, I've been searching for weeks for an answer to my problem and I still don't see one (similar cases, but either a-no answer or b-solution for another problem).
Computers:
A Windows 7 (32-bit) system and a Windows XP (32-bit) system.
Phone:
Samsung Vibrant SGH-T959
Firmware Version: 2.2
Baseband Version: T959UVJL5
Kernel Version: 2.6.32.9
Build Number: Nero.v3
Description of Problem:
When I plug my phone into either or my two computers the following occurs - My phone recognizes that it is plugged in and begins charging; my computers do nothing.
When I was on Android 2.1 I could plug my phone into either of my two systems and my PCs would respond appropriately (ie. show the drive letters and let me access the device once I mounted the device).
Since the very first Android 2.2 install my computers act like nothing is happening. ADB doesn't see my phone, Odin is silent, and Windows doesn't show any drive letters nor does it even show that I am plugging in a USB device.
I have tried to correct this by changing the USB settings on the phone (Kies, Media Player, Mass storage, Ask on connection) and even trying to connect while in debug mode. Sadly, I never made a nandroid backup to take me back to the Android 2.1 install (idiot me took the plunge before reading up on that section).
I don't understand what would cause my phone to be treated as if it wasn't there. I've tried different USB ports, different MicroUSB cables, and even uninstalling/reinstalling the various device drivers for the phone.
I can get into download mode just fine, but what's the point if Odin can't see the phone since Windows thinks that nothing is there? Before you ask, yes, I tried going into download mode before starting Odin as well as after starting Odin; debug mode on and debug mode off. I've been trying all the combinations.
If anybody has any information beyond what is in the stickies, I would greatly appreciate it!
Do you see "USB connected" in notification bar on the phone? You can also turn on USB debugging mode in USB settings. If you see "USB connect" in pull down notification bar..tap on that and it will mount on your computer.
I experienced similar problem with.axura tool...phone well charge but doesn't pop out the mount notification. I power off both my phone and computer and it work again. I'm sure this won't on your scenario but just wanna inform you that it's not all hopeless...good luck
Yes. I have seen the mount USB bar. Bad news: even after it says mounted, the PCs react as if nothing has happened.
Sent from my SGH-T959 using XDA App
First of all, read this forum (last post is mine) http://forum.xda-developers.com/showthread.php?t=925393 - make sure you have kies or kies mini installed so that you have the correct drivers on your computer for your vibrant.
secondly, team whiskey has developed a fix for the mount issue your experiencing: http://forum.xda-developers.com/showthread.php?t=846384&highlight=mount+fix
they also have the mount problem fixed in the later nero roms... should not be an issue. please let me know if this helps!
in_dmand said:
First of all, read this forum (last post is mine) http://forum.xda-developers.com/showthread.php?t=925393 - make sure you have kies or kies mini installed so that you have the correct drivers on your computer for your vibrant.
secondly, team whiskey has developed a fix for the mount issue your experiencing: http://forum.xda-developers.com/showthread.php?t=846384&highlight=mount+fix
they also have the mount problem fixed in the later nero roms... should not be an issue. please let me know if this helps!
Click to expand...
Click to collapse
Okay, so I've tried all of the above to no effect except for the latest Nero rom...
Looks like I'll be trying the latest Nero (thank goodness for Dropbox).
Nope. Updating to the latest Nero [v5] didn't work.
Anyone else?
Nvm... gl with fixing it.
All~G1 said:
Nvm... gl with fixing it.
Click to expand...
Click to collapse
I think I'm going to have to throw it under a bus...
This same thing happened to me and to fix this problem all I did was install the drivers I got online, PM me your email and ill send you the drivers
I am almost certain that it is drivers issue more than your phone or any rom. You need to completely uninstall current drivers..all traces of em, reboot and install drivers from samsung website or there are some here in vibrant section also. It happened to me couple of times where one set of drivers stopped working for no reason and i had to try couple of different ones.
I had the same problem. Phone would charge but not connect. I solved it by getting a new usb cable. I just use the bad one for charging now
Sent from my SGH-T959 using XDA App
This is a driver problem. Your computer does not have the phone drivers and is confused on what to make of your phone so it finally decides that it is a charging device more or less and will not mount it, EVEN if you select mount from your phone options.
Please look on this forum or ask the guy who posted before for the Samsung USB drivers. Install them on your computer and then mounting the phone from the notification bar will work.
Hope that helps and feel free to ask again if you are stuck on the process.
I thought it was a driver issue as well until last week.
My coworker has the same model phone and is currently running 2.2.
He has his laptop (Windows XP) setup to handle his phone.
When he plugs his equipment in, everything works. When he plugs my phone in, same old story...
Even when trying different MicroUSB cables.
This is why I'm considering loading up a different/modified kernel.
Sent from my SGH-T959 using XDA App

lost USB mounting CM9->Sammy ICS

Hey Folks.
Lost my USB mounting and I don't know why. Switched over from CM9 (mounting in windows works without any problems with the recommend driver) but now when I plugged in my cabel, windows can't installed the driver (using LP7 with CFroot).
I reinstalled the driver, choose manualy the driver but nothing worked.
Any ideas?
Thank you.
try with usb debugging mode...
must be your PC issue....put the cable to the direct mother board socket after PC reboot
Also tried it with USB Debugging on and off on every USB port and two diffrent pcs.
having the same problem since using ics r. remix and still cant fix
Sent from my GT-I9100 using Tapatalk
Nice to see that I am not the only one.
And yes to all others. We could use airdroid but I am not everytime in the same wlan.
aha well, some ICS roms dont support USB mass storage.. which is gay, but it should go back to normal when you flash back to a GB rom... which is wierd. I find many issues are fixed if... DUN DUN DUUUUUUUNNNN you unroot then reroot. This will delete all your shiz, so makesure you have a few CWM system backups saved
You probably know this, but i hope it helps
Tangent5
lynx2k50 said:
using LP7 with CFroot.
I reinstalled the driver, choose manualy the driver but nothing worked.
Click to expand...
Click to collapse
Could you list what LP7 rom you got (stock?).
Do you mean USB Mass Storage (ICS style) or MTP (GB style)?
I'm on WanamLite v10.7 (also LP7) with Siyah 3.0.1.
I didn't try stock LP7 / CF-Root so I'm not sure what might be the reason in that setup but here everything is working great.
You might want to try to download the latest Kies (even if you don't use it) and get the latest drivers that way - some times helps.
Hey.
Runing this rom:
http://forum.xda-developers.com/showthread.php?p=24753451&posted=1#post24753451
Which is nearly stock...deodexed and so on...
I am running atm the old LP7, now i saw that chainfire released the actual WLP7 (will flash it tonoght).
I mean the ICS mounting method. It is the stock one from this rom.
Kies is a good idea. Will also try it this evening.
Thanks for your help.
How to enable USB mass storage on Android 4.0 ICS Samsung Galaxy S2:
jayceooi.com/2012/03/14/how-to-enable-usb-mass-storage-on-android-4-0-ics-samsung-galaxy-s2/
Absolutely non sense
Sent from my GT-I9100 using XDA
USB mass storage
Hi,
That doesn't seem to work with the latest updates of ICS (4.0.4?). When plugging in the HTC Desire, I get the USB notofication and tapping on that allows selection of mounting the USB mass storage. However, on my Galaxy S2, I don't get the USB notification and so no option to mount USB. Under settings -> More - I don't have any USB utilities.
I'm running CM9 nightly from Apr 13th and Siyah 3.1rc2 kernel. Anyone else?
YellowShed
known issue in the latest AOKP ICS...heard that you can access through MTP
access through mtp
Thanks for the hint about MTP and glad I'm not losing the plot re AKOP known problem....
I had seen the device show up and assumed it was MTP, but there is no indication on the phone that it is connected thru MTP. I didn't want to try anything in case I messed up. Not a pressing issue for the mo, though. I presume the BYT (bright young things) will work this out soon...
YellowShed

[Q] [Solved?] No PC Detection on AOKP ROMs

Ok so I was previously running Hydr0g3n ICS ROM an older version and I had mount problems where only internal sd would mount, but it mounted at least. Occasionally I'd have to reboot my laptop because of no detection but that'd fix it.
Fast forward to a couple of days ago and I installed Resurrection Remix 04/05 but got really weird issues when connecting to my laptop e.g. installing device drivers, failing, usb sounds coming and going, device being recognised then disappearing again. Eventually no response. I reflashed, fully wiped, everything, experimented with drivers. Then plugged it into a mates (newer) laptop and it worked?
Back to mine, didn't work, installed Hydr0g3n ICS 05/05 which ran a lot smoother but still same issues, I repeated the steps above and even after device drivers actually successfully installed, it'd work and then next day no response or detection when plugging in USB. Since then I've gone through the drivers route again, trying all sorts of windows fixes, it still works fine when plugged into a newer laptop.
So after all my research etc I've realised that it seems to be some sort of power issue with the phone/ROM, perhaps the newer laptops have more USB hubs which aren't shared between many devices and so it works but mine is very intermittent if not non-existent. Oh, all other USB devices work, flash drives, external hard drives, I have never had any issues with any USB devices. Just this.
Also, I've tried toggling USB Debugging, and MTP UMS PTP, nothing. Read something about fast charge but have no notification that it's enabled on boot and no option to disable it in Kernel tweaks since I'm not on a supported kernel.
Hydr0g3n ICS ROM 2012 05 05 SGS2
3.0.29 Siyah v3.1.2
Any help would be much appreciated.
UPDATE:
I ordered a powered USB hub off eBay, it arrived today and did not work with the phone.
UPDATE 2:
So I recently stole my dads TouchPad and installed AOKP on it, my laptop detected it absolutely fine in MTP mode.
It uses the same cable so I figured, why not?
I plugged it in and hey presto, it popped up -_-
It's so strange the stock cable works on everyone elses laptops but mine, I don't know if it'll still work tomorrow though, I suppose if I don't re-comment then it still is working.
Bump?
FatPhysicsBoy said:
Ok so I was previously running Hydr0g3n ICS ROM an older version and I had mount problems where only internal sd would mount, but it mounted at least. Occasionally I'd have to reboot my laptop because of no detection but that'd fix it.
Fast forward to a couple of days ago and I installed Resurrection Remix 04/05 but got really weird issues when connecting to my laptop e.g. installing device drivers, failing, usb sounds coming and going, device being recognised then disappearing again. Eventually no response. I reflashed, fully wiped, everything, experimented with drivers. Then plugged it into a mates (newer) laptop and it worked?
Back to mine, didn't work, installed Hydr0g3n ICS 05/05 which ran a lot smoother but still same issues, I repeated the steps above and even after device drivers actually successfully installed, it'd work and then next day no response or detection when plugging in USB. Since then I've gone through the drivers route again, trying all sorts of windows fixes, it still works fine when plugged into a newer laptop.
So after all my research etc I've realised that it seems to be some sort of power issue with the phone/ROM, perhaps the newer laptops have more USB hubs which aren't shared between many devices and so it works but mine is very intermittent if not non-existent. Oh, all other USB devices work, flash drives, external hard drives, I have never had any issues with any USB devices. Just this.
Also, I've tried toggling USB Debugging, and MTP UMS PTP, nothing. Read something about fast charge but have no notification that it's enabled on boot and no option to disable it in Kernel tweaks since I'm not on a supported kernel.
Hydr0g3n ICS ROM 2012 05 05 SGS2
3.0.29 Siyah v3.1.2
Any help would be much appreciated.
Click to expand...
Click to collapse
just try 2 flash the latest siyah kernel and check
On Windows 7, after several USB connect-disconnect, I would experience Windows not responding to connection any more on that very USB port.
I usually have adb server running in background, so "Safely remove" feature is blocked, and I would simply remove after file operations are over.
I made a .bat file on desktop, that simply performs "adb kill-server", so that I can safely remove it, and have not experienced this problem since then.
Sun90 said:
just try 2 flash the latest siyah kernel and check
Click to expand...
Click to collapse
I've tried all of the kernels, Siyah, Thoravukk, NEAK, and multiple versions of Siyah too, including the latest one.
Also my powered USB hub arrived today and it did not remedy the issue.
mirbeksm said:
On Windows 7, after several USB connect-disconnect, I would experience Windows not responding to connection any more on that very USB port.
I usually have adb server running in background, so "Safely remove" feature is blocked, and I would simply remove after file operations are over.
I made a .bat file on desktop, that simply performs "adb kill-server", so that I can safely remove it, and have not experienced this problem since then.
Click to expand...
Click to collapse
Could you perhaps explain this a little more to me?
I plug it in and literally it charges but absolutely nothing else happens. Anything else works in the same port, just not the phone for some reason.
USB problems basics .
USB port should be mainboard port .
Usb Port on phone multiple USB problem posts say clean port .
Kies or Samsung USB drivers should be installed with Kies not running .
USB cable try Samsung cable or another .
Try USB debugging off and or on .
jje
JJEgan said:
USB problems basics .
USB port should be mainboard port .
Usb Port on phone multiple USB problem posts say clean port .
Kies or Samsung USB drivers should be installed with Kies not running .
USB cable try Samsung cable or another .
Try USB debugging off and or on .
jje
Click to expand...
Click to collapse
1) Yes they are all mainboard ports - No response.
2) Have cleaned USB ports on mainboard many times. This seems irrelevant too since all other devices are recognized.
3) Have also experimented with combinations of this. (All combinations) Nothing.
4) I have only tried the Samsung cable since it's all I have, and it works on all of my friends laptops.
Also, I plug it in, and it draws power (aka it charges) but nothing else. Not even a windows 'bong'. Even with the powered USB hub, it still only charges.
However the minute I plug it into a friends laptop it seems to work just fine.
@ op
goto device manager and uninstall the android devices you see there with the option "delete device drivers completely" and make a reboot.
now install the usb drivers and plug in the device.
FatPhysicsBoy said:
1) Yes they are all mainboard ports - No response.
2) Have cleaned USB ports on mainboard many times. This seems irrelevant too since all other devices are recognized.
3) Have also experimented with combinations of this. (All combinations) Nothing.
4) I have only tried the Samsung cable since it's all I have, and it works on all of my friends laptops.
Also, I plug it in, and it draws power (aka it charges) but nothing else. Not even a windows 'bong'. Even with the powered USB hub, it still only charges.
However the minute I plug it into a friends laptop it seems to work just fine.
Click to expand...
Click to collapse
This last point tells me there are possibly some registry settings on your computer that are keeping the drivers from loading properly.
I've never had to do this, so I don't know what to look for EXACTLY, but you may need to get a registry cleaner and try to eradicate all traces of Kies and Samsung drivers from your computer, then re-install either Kies (to get the drivers) or the stand-alone USB drivers.
I remember reading another post some time back about some other guy who actually totally re-installed Windows... which is a bit like using explosives to kill a mosquito, if you ask me.
However, try bala_gamer's suggestion first. That may be all that is needed.
FatPhysicsBoy said:
1)
2) Have cleaned USB ports on mainboard many times. This seems irrelevant too since all other devices are recognized.
NO its the phone USB port .
Agree that if all fails try reinstall of Kies and drivers after a delete .
Delete registry kies .
[HKEY_CURRENT_USER\Software\Samsung]
[HKEY_LOCAL_MACHINE\SOFTWARE\SAMSUNG]
jje
Click to expand...
Click to collapse
bala_gamer said:
@ op
goto device manager and uninstall the android devices you see there with the option "delete device drivers completely" and make a reboot.
now install the usb drivers and plug in the device.
Click to expand...
Click to collapse
So believe it or not I didn't actually go into detail in the op! But a few more things to note are that the device does not show up in device manager at all. Even with shadow device detection enabled. I have used all manner of driver software available to clear out all old usb drivers/any drivers which may be conflicting etc. I have also removed and reinstalled the usb host controllers and root hubs many times
ctomgee said:
This last point tells me there are possibly some registry settings on your computer that are keeping the drivers from loading properly.
I've never had to do this, so I don't know what to look for EXACTLY, but you may need to get a registry cleaner and try to eradicate all traces of Kies and Samsung drivers from your computer, then re-install either Kies (to get the drivers) or the stand-alone USB drivers.
I remember reading another post some time back about some other guy who actually totally re-installed Windows... which is a bit like using explosives to kill a mosquito, if you ask me.
However, try bala_gamer's suggestion first. That may be all that is needed.
Click to expand...
Click to collapse
Yes, indeed I also believed it to be some sort of registry problem, I have also used tune up utlities, registry mechanic and ccleaner (I think thats all there was!) and run registry scans/cleans/fixes/defrags. To no avail. I was actually considering reinstalling windows or something.
JJEgan said:
FatPhysicsBoy said:
1)
2) Have cleaned USB ports on mainboard many times. This seems irrelevant too since all other devices are recognized.
NO its the phone USB port .
Agree that if all fails try reinstall of Kies and drivers after a delete .
Delete registry kies .
[HKEY_CURRENT_USER\Software\Samsung]
[HKEY_LOCAL_MACHINE\SOFTWARE\SAMSUNG]
jje
Click to expand...
Click to collapse
Yes, my bad, I have also cleaned that too. Also I didn't think it could be that since it seems to work on everyone elses laptop.
Just deleted those registry entries, rebooted. Nothing. Deleted a few more from old software which seemed to still be floating around, rebooted. Nothing.
:'(
Click to expand...
Click to collapse
I had the same problem with AOKP ROMs
I had the same problem with AOKP ROMs and then I installed MIUI and it worked again, I guess you can try any other ROM (not AOKP) and check if it solves your problem.
So I recently stole my dads TouchPad and installed AOKP on it, my laptop detected it absolutely fine in MTP mode.
It uses the same cable so I figured, why not?
I plugged it in and hey presto, it popped up -_-
It's so strange the stock cable works on everyone elses laptops but mine, I don't know if it'll still work tomorrow though, I suppose if I don't re-comment then it still is working.

[Q] USB Device not recognized

I am owner of the Galaxy S2. I updated yesterday to SuperNexus Jelly Bean ROM, didn't liked it. I restored my device to CM9 which i was using for a month without any problems. Then it started, computer couldn't recognize the phone anymore. Its like that SuperNexus broke something i don't know. I reformatted my Win 7 Ultimate x64 and installed fresh new CM10 - but after all my computer and S2 don't like each other - USB device not recognized. Chaos. I asked my friend to come over just to test with his S2 (he's on stock ICS 4.0.3 or 4.0.4), and when i plug his phone into my computer, everything works flawlessly. I tried mounting in recovery, i tried with and without usb debugging, Odin doesn't find phone neither, tried updating drivers - no luck... Dialing *#7284" just gives me "connection problem or invalid MMI code". Need help on this please!
You can check THIS thread. The one HERE , and also THIS thread.
I've read them all, tried every advice, but phone still isn't reacting to anything. So my problem is that phone couldn't connect to a computer, well it connects but it states "USB device not recognized", it charges but that's all. Everything started with Custom ROM SuperNexus. I've done these steps so far:
1. Reformatted my computer OS, which is Windows 7 Ultimate x64
2. Downloaded CM10 over my phone, get into recovery --> factory reset, wipe cache, wipe dalvik, format system, install ROM, wipe cache, wipe factory
3. I tried on my computer, tried on my old computer with Win XP x86
4. My friend's Galaxy S2 is working like a charm with MY cable on MY computer, which makes me believe that there is some defectiveness in my phone
5. I tried cleaning MicroUSB port with tooth pick, ear-cleaning pick (or how do you call it), needle with some paper wrapped around it, tried blowing in it
6. I tried with different USB ports, front ones, USB 3.0 - still no luck
7. I tried flashing Wanamlite and Neat ROM-s, still the same problem
I'm using Airdroid now, but i really need to know what's the problem! I have already ordered a new parts on E-Bay and I'm having high hopes about that solution. Im not able to post link to E-bay item, but search it under Item Number: 150904945773. Any other advice is really highly appreciable. Thank you
Try downloading the Rom over WiFi, or Hardline instead. Have you tried a different USB Cable ? Also I'm not able to check that Ebay # right now.
TEAM MiK
MikROMs Since 3/13/11
eBay item is this: New Samsung i9100 Galaxy SII S2 Charger Charge Port Flex Cable Replacement parts
OP, I'm hoping it works for you. You seem to be going in the right direction with your troubleshooting.
Well, i've downloaded this ROM (CM10) via WiFi, now i can do it over Airdroid too. But is there a way to flash Stock Original Samsung ICS in recovery? Or is it only available in Kies and Odin? I came across "Mobile Odin", do you guys have some experience with it, is it safe to use? How big are chances anyway that USB will work with stock ROM? Someone told me "your USB port on phone is OK, if it's charging it's not broken", so I'm thinking that it is not a hardware issue after all? And BTW i used several cables, and three different computers. My girlfriend have SGS3, i tried it like 2 hours ago with her cable on her computer with no luck (and of course her phone have no problems to connect to that computer using that cable). Thank you
I would try a Stock Rooted Rom, and see if that works correctly. If not try connecting the Device, and reboot the PC with the Device plugged in.
How to install stock ROM if i cannot get Kies or Odin to recognize phone? Via Mobile Odin?
kuleee said:
How to install stock ROM if i cannot get Kies or Odin to recognize phone? Via Mobile Odin?
Click to expand...
Click to collapse
Try USB solutions from My Android Solutions or Mobile Odin like http://forum.xda-developers.com/showpost.php?p=28302093&postcount=4789 ( procedure is same but written for Korean SGS 1
Guys let me tell you that I'm grateful to you, cause this Mobile Odin worked and my Stock Rooted ROM worked in connecting with PC. But not on first try when i got into a newly flashed Stock Rooted Firmware, i've let it to do his stuff, update what he needed to update blahblah. Then i tried to connect my cable - it didn't work. I cursed, i cursed so bad. Then i considered to give it another shot, rebooted the phone - and voila! Everything works, i tried 2-3 times and its working. Obviously SuperNexus started my problems, they couldn't be repaired by any other ROM i tried (i tried CM9, CM10, Wanamlite, old Wanamlite with MTP enabler, Neat ROM)... Then with Mobile Odin everything just worked. Dunno what really was the problem. Thank you all
Glad you got it sorted
TEAM MiK
MikROMs Since 3/13/11

Categories

Resources