after upgrading the firmware of the Xperia, it does not work the camera, appearing as not connected, it already tried to restore with original firmware and not obitive success.
xcollector said:
after upgrading the firmware of the Xperia, it does not work the camera, appearing as not connected, it already tried to restore with original firmware and not obitive success.
Click to expand...
Click to collapse
Normally a reboot sorts this out....I suggest you speak to the developer of your custom rom....
Related
my question is that i am flashing an old firmware
in order to have an old camera firmware version.
But my fw still remains the same ZDFF02.
Ani ideas how can i go back to ZDFE02?
bump
I'm interested in this too.
tried the same by flashing older firmware and writing back the old firmware but strangely it didnt happened.
any reason for downgrading?
bala_gamer said:
tried the same by flashing older firmware and writing back the old firmware but strangely it didnt happened.
any reason for downgrading?
Click to expand...
Click to collapse
Yeah bro
With newer fw my camera on CM10 isn't working, always shows " can't connect to camera".
With stock based roms it works perfectly.
I recently picked up an Xperia X10 to use with my straight talk service. I rooted and unlocked the bootloader just fine using flashtool; edited the APN settings and have a functional phone. But, whenever I try flashing a new ROM, I get into some trouble. First, my wifi never works. I read that's a common thing and tried flashing the zip to fix it; no go. Secondly, I lose service with the new ROM; again, common thing, and I've found fixes. I'd try the kill services command through terminal emulator, but that brings me to my third issue. I lose access to my SD Card; it won't mount it at all with the new ROM, except for when I'm in xRecovery. I have an Xperia X10a from AT&T, running official Android 2.1. Firmware is 2.1.A.0.492 and baseband 2.1.65. I've tried various ROMs that are compatible with this baseband, including FreeXperia from Achotjan; all with the same results. Is it necessary to flash your baseband even if the ROM is verified for your current baseband? Am I missing some critical step here? Sorry if this is in the FAQs somewhere; I've read the stickies in here and the development section 3 or 4 times each (I get bored at work ), and didn't see it anywhere. TIA
RadRacer said:
I recently picked up an Xperia X10 to use with my straight talk service. I rooted and unlocked the bootloader just fine using flashtool; edited the APN settings and have a functional phone. But, whenever I try flashing a new ROM, I get into some trouble. First, my wifi never works. I read that's a common thing and tried flashing the zip to fix it; no go. Secondly, I lose service with the new ROM; again, common thing, and I've found fixes. I'd try the kill services command through terminal emulator, but that brings me to my third issue. I lose access to my SD Card; it won't mount it at all with the new ROM, except for when I'm in xRecovery. I have an Xperia X10a from AT&T, running official Android 2.1. Firmware is 2.1.A.0.492 and baseband 2.1.65. I've tried various ROMs that are compatible with this baseband, including FreeXperia from Achotjan; all with the same results. Is it necessary to flash your baseband even if the ROM is verified for your current baseband? Am I missing some critical step here? Sorry if this is in the FAQs somewhere; I've read the stickies in here and the development section 3 or 4 times each (I get bored at work ), and didn't see it anywhere. TIA
Click to expand...
Click to collapse
I would suggest you upgrading 2.3.3.
You can find ftf files for 2.3.3 in my signature. unzip the files to get ftf.
You can flash american generic or global generic version. All will work for you.
flash the ftf using flashtool.
Here's a guide to use flashtool : http://forum.xda-developers.com/showthread.php?t=928343
RadRacer said:
I recently picked up an Xperia X10 to use with my straight talk service. I rooted and unlocked the bootloader just fine using flashtool; edited the APN settings and have a functional phone. But, whenever I try flashing a new ROM, I get into some trouble. First, my wifi never works. I read that's a common thing and tried flashing the zip to fix it; no go. Secondly, I lose service with the new ROM; again, common thing, and I've found fixes. I'd try the kill services command through terminal emulator, but that brings me to my third issue. I lose access to my SD Card; it won't mount it at all with the new ROM, except for when I'm in xRecovery. I have an Xperia X10a from AT&T, running official Android 2.1. Firmware is 2.1.A.0.492 and baseband 2.1.65. I've tried various ROMs that are compatible with this baseband, including FreeXperia from Achotjan; all with the same results. Is it necessary to flash your baseband even if the ROM is verified for your current baseband? Am I missing some critical step here? Sorry if this is in the FAQs somewhere; I've read the stickies in here and the development section 3 or 4 times each (I get bored at work ), and didn't see it anywhere. TIA
Click to expand...
Click to collapse
Download SEUS and upgrade your phone to stock gingerbread2.3.. it has the baseband required... then use flashtool to root and unlock....
Remember every custom ROM has different kernel... for example FDP ROMs run on FDP kernel.. x10s runs on doomlords modified kernel... feralab kernel is for feralab ROMs.. so you need to be careful.. good luck...
Sent from my Transformer TF101 using xda app-developers app
OK, I flashed the American gingerbread ftf. Everything appears to work except my SD card. I tried mounting through terminal, tries formatting from both the phone (xRecovery) and computer (USB adapter) and nothing. Suggestions?
RadRacer said:
OK, I flashed the American gingerbread ftf. Everything appears to work except my SD card. I tried mounting through terminal, tries formatting from both the phone (xRecovery) and computer (USB adapter) and nothing. Suggestions?
Click to expand...
Click to collapse
did you try another sd card?
does usb tranfer work by connecting to pc?
THeLogiC said:
did you try another sd card?
does usb tranfer work by connecting to pc?
Click to expand...
Click to collapse
Don't have another SD card, but it did this before. Once I restore to 2.1 it works fine. It does USB mode through xRecovery, haven't tried while Android is running.
RadRacer said:
Don't have another SD card, but it did this before. Once I restore to 2.1 it works fine. It does USB mode through xRecovery, haven't tried while Android is running.
Click to expand...
Click to collapse
thats strange. if it works in 2.1 it should in 2.3.3 too
RadRacer said:
Don't have another SD card, but it did this before. Once I restore to 2.1 it works fine. It does USB mode through xRecovery, haven't tried while Android is running.
Click to expand...
Click to collapse
I had the same issue when I upgraded to 2.3.3 from 2.1 I had to buy new SD card... but my old one worked just fine with other.. sometimes these things happen..
Sent from my Transformer TF101 using xda app-developers app
Reformatted again and now it works:good:
RadRacer said:
Reformatted again and now it works:good:
Click to expand...
Click to collapse
glad to hear that
Hello everyone
I upgraded my z ultra to Kitkat.
Everything is fine but the camera is NOT working.
Only the front camera is working and the rear makes the phone to become irresponsible.
I did a reset, I applied the firmware again but no luck
((
Please help me
:crying:
Factory reset usually cures all problems
gasland said:
Hello everyone
I upgraded my z ultra to Kitkat.
Everything is fine but the camera is NOT working.
Only the front camera is working and the rear makes the phone to become irresponsible.
I did a reset, I applied the firmware again but no luck
((
Please help me
:crying:
Click to expand...
Click to collapse
How did you upgrade exactly? My first flash was using a zip from recovery then flashing another fiel with Flashtool and that ended up with camera issues.
So after that I took the USA ftf ROM and flashed via Flashtool then flash the kernel from another thread and the supersu file via recovery and it worked perfectly so you could try a full flash again.
I even wiped everything, flash 2 different roms and nothing. It's nearly impossible to even use my phone now what to do now?
Hmong_Xiong said:
I even wiped everything, flash 2 different roms and nothing. It's nearly impossible to even use my phone now what to do now?
Click to expand...
Click to collapse
Restore the working backup you should have made in twrp before flashing anything. If you don't have one, use one of the flash tools on the forum to return phone to stock.
hawkswind1 said:
Restore the working backup you should have made in twrp before flashing anything. If you don't have one, use one of the flash tools on the forum to return phone to stock.
Click to expand...
Click to collapse
Restored to my old stock :\ any ways I can use a custom rom? Or no?
The phone force closes on 10m ports are a bug some users experience, myself included. He's working on a fix. Jasminerom version 1.1 works great though, based on 10b firmware. Same dev is working on a 10c version based on the latest ota.
Coming from an MM eXistenZ installation (not sure what exact version, i think it was 5.6.5 final) I wanted to upgrade to O or at least N.
I have tried RR-O builds 20180316 and 20180213, RR-N 20171020 Final, CR-O 20180316, CR-N 20170918, but the result is always the same.
I get a smoothly running installation with only one obvious quirk: Whenever there are no apps running and the screen is off, after some amount of time (sometimes instantly, sometimes after 10 minutes or more) i can either not turn the screen on again and my phone reboots, or it reboots by itself without me interacting.
The only way I can reliably prevent my phone from crashing is playing music (via Spotify), even when muting media sound. While charging the phone will not reboot as well, until it reaches 100%
I tried different performance modes, with high performance resulting in (subjectively) worse results, i.e. reboots after a shorter amount of time, and almost thought energy saving mode would have fixed the problem as it worked for about 20 minutes, but then it began to reboot again.
I am using TWRP 3.2.1-1 and tried with/without Magisk (16.0) and flashing MarrowKernel (O-0.6, N-0.6/0.5).
Before flashing I performed a full wipe and also replaced the SD card
Logs from RR-N-v5.8.5-20171020-sirius-Final with Magisk 16.0 and MarrowKernel 0.6
dmesg: https:// cloud [DOT] haggi [DOT] me/index.php/s/C969nUuKTWMuJ1g
logcat: https:// cloud [DOT] haggi [DOT] me/index.php/s/as0qMPNYpGh4YKD
Sorry for the ugly links, but the logs are too long for a post, I cannot find an attachment option and as a new user may not post outgoing links yet
Please reflash Stock firmware via sony emma tool
This should help
Do not use existenz rom before switching to any custom rom reflash Always last stock and then update it to custom rom
Thank you, flashing stock firmware did the trick. Didn't work on the first try and my phone got stuck on the Sony bootscreen, but flashing the ROM a second time fixed the problem.
Running on RR-O now without any noticeable problems except for AudioFX crashing when sound starts/stops playing, but this should be fixed easily.
haggi94 said:
Thank you, flashing stock firmware did the trick. Didn't work on the first try and my phone got stuck on the Sony bootscreen, but flashing the ROM a second time fixed the problem.
Running on RR-O now without any noticeable problems except for AudioFX crashing when sound starts/stops playing, but this should be fixed easily.
Click to expand...
Click to collapse
Hi, did you root after flashing stock firmware ? or proceeded already to installation instructions ?
---------- Post added at 09:35 AM ---------- Previous post was at 08:46 AM ----------
rcstar6696 said:
Please reflash Stock firmware via sony emma tool
This should help
Do not use existenz rom before switching to any custom rom reflash Always last stock and then update it to custom rom
Click to expand...
Click to collapse
Hi Guru,
Do you recommend using Sony Emma Tool over Flashtool for flashing stock FTF ?
I would also like to try your ROMS, but I'm completely new on this device and not sure what to do when your installation instructions is to flash first stock ftf.
I wanna ask about Emma, does you recommend Emma for updating bootloader? I read in somewhere that if updating bootloader you cannot use stock ftf or restor TA backup cause it will kill the device. Is that true?
19iceman32 said:
Hi, did you root after flashing stock firmware ? or proceeded already to installation instructions ?
Click to expand...
Click to collapse
I have not rooted my phone after flashing stock FW
darknessmc said:
I wanna ask about Emma, does you recommend Emma for updating bootloader? I read in somewhere that if updating bootloader you cannot use stock ftf or restor TA backup cause it will kill the device. Is that true?
Click to expand...
Click to collapse
Sorry, I can't tell you as I continued flashing RR without having booted my phone in between and my TA partition is already lost since flashing the first custom ROM because I didn't know of it