please help me - Android Q&A, Help & Troubleshooting

Hello i have an prestigio multipad 5100c, and i wanted to have a newer android on it, so i decided to get 1 from here, and since i didnt find any android specificaly for prestigio pmp5100c
i used the 1 for PMP3084B
And now when i turn on my tablet PC i have a white screen and nothing happenes,
i also tried to apply the same method i did to put that to put another
but now it doesnt even detect it on my PC
Also now when i connect to PC it detects it as Pmp3084B usb mass storage device

bump up my post.. .

hmmm seems that the rom you flashed is not compatible or it doesnt work with your tablet... try factory reseting

How do i factory reset *?
i cannot find anywhere how to do it, not even in manual

bump up my post

bump up my post

This is from the site:
Download this and try and restore the original firmware on the device:
http://marketing.prestigio.com/$Customer_Support/Drivers/Tablet_PC/PMP5100/Firmware/Prestigio_5100_FW_Tools_v1.23.zip

i alredy tried, it doesnt detect it anymore.

bump up my post

bump up my post

bump my posssstttttttt

bump up my post.ttttt

bump up my post

bumpnzi upnzi my postnzi

You could try this: REMOVED LINK (Doesn't work).

i cant use that as the program for flashing doesnt even detect my device

igor5336 said:
i cant use that as the program for flashing doesnt even detect my device
Click to expand...
Click to collapse
Have you tried re-installing the drivers on your PC? Have you tried booting into recovery?

Theonew said:
Have you tried re-installing the drivers on your PC? Have you tried booting into recovery?
Click to expand...
Click to collapse
I have formated my PC since, tried instaling drivers again, but it just seas that
"Drivers are up to date"
Also i dont know how to boot into recovery. -.-

bump up my posttttt

igor5336 said:
Also i dont know how to boot into recovery. -.-
Click to expand...
Click to collapse
Try holding "volume down" then "the power button" while your device is off.

Related

[Q] cant get to bootloader

so i formated my phone for some reason and all i see is black screen
and i cant get to the bootloader but i can get to download mode...
but my computer and odin cant recognize my phone
i updated all the drivers i need and still cant recognize
is there a way that i can fix this?
can i install the cwm to the sd card and how?
10x for the help!
sawserlauz48 said:
so i formated my phone for some reason and all i see is black screen
and i cant get to the bootloader but i can get to download mode...
but my computer and odin cant recognize my phone
i updated all the drivers i need and still cant recognize
is there a way that i can fix this?
can i install the cwm to the sd card and how?
10x for the help!
Click to expand...
Click to collapse
bootloader?
Can you still get to recovery mode?
You can try another cable and another USB port
reply
sawserlauz48 said:
so i formated my phone for some reason and all i see is black screen
and i cant get to the bootloader but i can get to download mode...
but my computer and odin cant recognize my phone
i updated all the drivers i need and still cant recognize
is there a way that i can fix this?
can i install the cwm to the sd card and how?
10x for the help!
Click to expand...
Click to collapse
Try another computer, with a good known working cable
Try another computer, with a good known working cable
Click to expand...
Click to collapse
i tried another cable and computer didnt work
bootloader?
Can you still get to recovery mode?
You can try another cable and another USB port
Click to expand...
Click to collapse
that's the problem i can't get to the recovery mode
also tried another usb port didnt work

[Q] HOW to fix bricked Xperia U when its not recognize by any pc and flashtool

hello guys,
i have sony xperia u having STE 4.4.4 kitkat. but becouse my phone not recognise in any pc, i flash stock rom via TWRP recovery. so now problem is my XPERIA U is not recognize in any pc via flashtool so i can't flash ftf or any other rom. so plz anyone have any solution to fix this problem??
Try turning it off, then holding down the volume down (or up?) key when you plug it into the computer, the LED should go purple or green or something. Then see if it shows up
jebediaah said:
Try turning it off, then holding down the volume down (or up?) key when you plug it into the computer, the LED should go purple or green or something. Then see if it shows up
Click to expand...
Click to collapse
i traied it so many time but laptop does not recognize my phone as xperia u so it do not connect in ither flashboot or fastboot mode. and i installed all drivers which are neccessory. :
Have you tried installing drivers with flashtool?
Have you got access to a linux distro? because thats how I was able to connect my bricked xperia go in fastboot mode.
Maybe try unistalling your drivers and reinstalling them.
ok you need to tell me what os are you using and what rom did you try to flash does your phone light up when you connect it in fastboot if so its a drivers problem you should see if drivers are installed correctly if its correct then change your cable and the usb hub and try again Thanking me is always better than saying thanx
jebediaah said:
Have you tried installing drivers with flashtool?
Have you got access to a linux distro? because thats how I was able to connect my bricked xperia go in fastboot mode.
Maybe try unistalling your drivers and reinstalling them.
Click to expand...
Click to collapse
ya i have tried installing drivers via flashtool and i also changed charging socket because it seems like some hardware problem but problem is still existed....and i dont know about linux much so can you give me some brief???/
THANK YOU
MaDTH Bistata said:
ok you need to tell me what os are you using and what rom did you try to flash does your phone light up when you connect it in fastboot if so its a drivers problem you should see if drivers are installed correctly if its correct then change your cable and the usb hub and try again Thanking me is always better than saying thanx
Click to expand...
Click to collapse
i was using xperia STE 4.4.4 kitkat. and then i flash Stock JB 4.1.2. but i dont have rom in my SD card and it is also not connected to flashtool ( every time i connect to pc its show the massage of Device is not recognise )so i cant revert it back to STE 4.4.4 so now what shold i do????
ok if your twrp is working do the following
1-download a new rom
2-see mount usb and check it
3-now your phone will connect storage
4-do the steps to install the rom
5-ALLWAYS DO A NANDROID backup after it
if twrp is not working
does your phone work with the stock rom??? if so it will be so easy just root it (if its unrooted) and install cwm or twrp
hope that i helped
9228
MaDTH Bistata said:
ok if your twrp is working do the following
1-download a new rom
2-see mount usb and check it
3-now your phone will connect storage
4-do the steps to install the rom
5-ALLWAYS DO A NANDROID backup after it
if twrp is not working
does your phone work with the stock rom??? if so it will be so easy just root it (if its unrooted) and install cwm or twrp
hope that i helped
Click to expand...
Click to collapse
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
dont worry
D3ViL's AnG3L said:
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
Click to expand...
Click to collapse
dont worry man we will fix it i promise
let me do some research and i will get you the solution man
try it
D3ViL's AnG3L said:
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1849170 check this and try it if you have any problems then contact me
data cable
D3ViL's AnG3L said:
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
Click to expand...
Click to collapse
Even your data cable can cause these issues try another data cable.
make sure it is an standard one!:good:
MaDTH Bistata said:
dont worry man we will fix it i promise
let me do some research and i will get you the solution man
Click to expand...
Click to collapse
Thanxxx buddy....
Reply soon
The_Ace said:
Even your data cable can cause these issues try another data cable.
make sure it is an standard one!:good:
Click to expand...
Click to collapse
ya i tried it too
but no positive result.....
I have same problem which isnot sorted out yet
HEllow guys..
the simple solution that my device was needed was one soldering at charger connecting pin. i don't know at where that person did that soldering but now its recognize in every pc.
and thank a lot for your help in troubleshoot this problem

Lenovo a680 help! Soft bricked/ boot loop problem

Hi dude, Just wanna ask how to fix my lenovo a680 boot loop problem. When I enter to the recovery mode there is no "Advance" Option in my stock recovery. Also every time i tried to connect my phone to a laptop/ desktops it disconnects instantly. I tried different usb cables, but the problem still persist. I really don't know what I'm gonna do. I also tried ADB but it wont connect to my phone it says "Error: Devices not found" My only chance on repairing my phone is using a 2gb sd card. Which I also tried. I tried to flash stock rom on it but it says "Installation aborted" There is also a resting robot with a red triangle and an exclamation point on it. Which says " No Command" So if you can help me, that would mean a lot to me. Thanks in advance!
The last way u can do is "Factory Reset" using stock recovery.., hit thanks if I help you..
rpav_27 said:
Hi dude, Just wanna ask how to fix my lenovo a680 boot loop problem. When I enter to the recovery mode there is no "Advance" Option in my stock recovery. Also every time i tried to connect my phone to a laptop/ desktops it disconnects instantly. I tried different usb cables, but the problem still persist. I really don't know what I'm gonna do. I also tried ADB but it wont connect to my phone it says "Error: Devices not found" My only chance on repairing my phone is using a 2gb sd card. Which I also tried. I tried to flash stock rom on it but it says "Installation aborted" There is also a resting robot with a red triangle and an exclamation point on it. Which says " No Command" So if you can help me, that would mean a lot to me. Thanks in advance!
Click to expand...
Click to collapse
bootloop? were you trying to root.flash anything? Never mind. flash a custom recovery cwm, twrp of your choice. then,
full wipe from there. and flash lenovo a680 stock firmware from here. this will delete everything.not sure of internal sd card.there are also flash instuctions too. Hope this fix it. After you flash i think you will get your stock recovery back.
HIT THANKS IF I HELPED. DON'T FORGET TO HIT THANKS.
LINK HERE:
androidxda.com/download-lenovo-stock-rom-models
Edit: you weren't able to flash from phone because stock recovery can't flash roms.. it can't wipe system partition.
Hi thank you for your suggestion but i tried everything but i can't flash any roms because every time i connect my phone through a laptop or a desktop it disconnects automatically within 3-5 seconds. I also tried flashing rom through an sd card but i get a "Installation aborted" I also tried flashing a recovery but my problem is the disconnection between my phone and my laptop, i tried different cables and sockets but it's still the same. When I tried to use the usb cable to another phone it doesn't disconnect. I also tried using adb but when it's starting to install the zip file it disconnects also. I tried everything.
Hi MicroMonster Thank you for your suggestion but I tried that a thousand times, I've tried clearing the partition and the cache and everything but it doesn't do the job.
rpav_27 said:
Hi MicroMonster Thank you for your suggestion but I tried that a thousand times, I've tried clearing the partition and the cache and everything but it doesn't do the job.
Click to expand...
Click to collapse
Hello there..How you'r phone,did u fix or found any solution yet?If not,i'm ready to help.
Need help
Mafi91 said:
Hello there..How you'r phone,did u fix or found any solution yet?If not,i'm ready to help.
Click to expand...
Click to collapse
Hey bro, do u have a link for stock rom for this phone? Im going to load the rom via sideload. Thanks!
hristcroixqwerty said:
Hey bro, do u have a link for stock rom for this phone? Im going to load the rom via sideload. Thanks!
Click to expand...
Click to collapse
http://androidxda.com/download-lenovo-stock-rom-models
here you can find and download any stock rom for lenovo smartphone
i tried to download lenovoA680 stockrom in that link and everytime i reach 50% the download stop progressing do you have other link where i can download the stockrom?
please help..soft brick problem
hi, I got the same problem.
My Lenovo A680_row phone was stuck on its logo upon start up (boot loop, I guess).. I tried the recovery mode but nothings happen. So I decided to use SPFT to flash new rom. I think the driver installed successfully,my phone is being detected showing MTK USB port on device manager of pc but eventually only for a few seconds,then it will disconnect,hence I wont be able to flash new rom using SPFT.. how will i solved this?I tried a lot of drivers from the net and used different usb connector but still goes with the same problem.. hope someone could help me with this..thanks!
---------- Post added at 06:18 AM ---------- Previous post was at 06:08 AM ----------
Mafi91 said:
Hello there..How you'r phone,did u fix or found any solution yet?If not,i'm ready to help.
Click to expand...
Click to collapse
hi Mafi92..I got the same problem..pls help My Lenovo A680_row phone was stuck on its logo upon start up (boot loop, I guess).. I tried the recovery mode but nothings happen. So I decided to use SPFT to flash new rom. I think the driver installed successfully,my phone is being detected showing MTK USB port on device manager of pc but eventually only for a few seconds,then it will disconnect,hence I wont be able to flash new rom using SPFT.. how will i solved this?I tried a lot of drivers from the net and used different usb connector but still goes with the same problem.. hope someone could help me with this..thanks!
Hi dude, Just wanna ask how to fix my lenovo a680 boot loop problem
Hi dude, Just wanna ask how to fix my lenovo a680 deadboot problem how to revive pls hep me
LENOVO A680 Bootloop solution + Update THIS SHOULD HELP
try SEARCHING ON GOOGLE :
lenovoa680transcrypto.blogspot
hi
I'm having a similar problem that when connecting with the USB the device shows very briefly in device manager, less than 1 sec and then it's gone.

troubleshooting to connect the phone to the PC

Hi all,
by cons for several weeks I've a concern with my redmi Note 2 and I can't find the answer to my problem on the forum or even the Internet.
Since the last update 7.2.2 (global) I have the Recovery MIUI who crushed the TWRP. I changed to test 6.3.17. The update to the .24 went wrong and I don't know why. Since the phone is bootloop. But the problem is that my phone is not recognized by any PC. I tried several PCs, several cables, several drivers, with or without the Fastboot, unable to connect. Therefore impossible to load a new version. I don't think it's material problem because the phone recharge well with a cable to the socket.
Is there another handling or debug decision to restart the phone? I'm in France for information.
thank you in advance if you can point me to a solution !
Hope someone can help me.
Manu
Can the phone boot to miui recovery? If so, you should be able to use miui recovery to flash TWRP (I think you will need one with a signed install zip). You only need to take out the external SD, put it in one of those cheap USB card readers, copy your recovery and ROM to the SD, put it back in the phone, flash TWRP with miui recovery, and then flash the ROM with TWRP (I am assuming that miui recovery can install things from the external SD - if not, then none of this will work).
Hi Bro,
Yes it boot in MIUI recovery but impossible to get access to the SD Card...
I tried to put the file on the SD card but you can't choose the path, I think the recovery will look only in the internal memory ... And as I can't access the internal memory..
I despair !!
Thanks o lot for your help
DarthJabba9 said:
Can the phone boot to miui recovery? If so, you should be able to use miui recovery to flash TWRP (I think you will need one with a signed install zip). You only need to take out the external SD, put it in one of those cheap USB card readers, copy your recovery and ROM to the SD, put it back in the phone, flash TWRP with miui recovery, and then flash the ROM with TWRP (I am assuming that miui recovery can install things from the external SD - if not, then none of this will work).
Click to expand...
Click to collapse
manu33xtro said:
Hi Bro,
Yes it boot in MIUI recovery but impossible to get access to the SD Card...
I tried to put the file on the SD card but you can't choose the path, I think the recovery will look only in the internal memory ... And as I can't access the internal memory..
I despair !!
Thanks o lot for your help
Click to expand...
Click to collapse
Ok - but have you tried the Mediatek SP Flash Tool?
Of course yes but the real problem is that the phone is not recognized by the PC and therefore can't load anything ...
Even changing drivers or cables or PC, nothing to do.
DarthJabba9 said:
Ok - but have you tried the Mediatek SP Flash Tool?
Click to expand...
Click to collapse
manu33xtro said:
Of course yes but the real problem is that the phone is not recognized by the PC and therefore can't load anything ...
Even changing drivers or cables or PC, nothing to do.
Click to expand...
Click to collapse
So, when the battery is removed, and you connect the USB cable, the phone is not even vibrating (and making that weird sound) every couple of seconds or so?
Yes you're right : every 10s the phone vibrate...
DarthJabba9 said:
So, when the battery is removed, and you connect the USB cable, the phone is not even vibrating (and making that weird sound) every couple of seconds or so?
Click to expand...
Click to collapse
manu33xtro said:
Yes you're right : every 10s the phone vibrate...
Click to expand...
Click to collapse
Well, then it is very strange that you can't use the SP Flash Tool. If the phone vibrates, then the device is recognised, and you should be able to flash anything you want with the SP Flash Tool! How exactly were you trying to use the Flash Tool?
I tried so many solutions I really don't know exactly how I used the software.
I will again try everything.
But against any changes when I look in the USB settings of the PC, the phone doesn't appear.
I try again just now, thank you for your help.
DarthJabba9 said:
Well, then it is very strange that you can't use the SP Flash Tool. If the phone vibrates, then the device is recognised, and you should be able to flash anything you want with the SP Flash Tool! How exactly were you trying to use the Flash Tool?
Click to expand...
Click to collapse
manu33xtro said:
I tried so many solutions I really don't know exactly how I used the software.
I will again try everything.
But against any changes when I look in the USB settings of the PC, the phone doesn't appear.
I try again just now, thank you for your help.
Click to expand...
Click to collapse
With the SP Flash Tool, all you need is the correct "scatter" file (MT6795_Android_scatter.txt), and the image(s) that you want to flash. If the phone is vibrating, then the SP Flash Tool should be able to connect to it when you click "Download". Just make sure that you first untick everything that you do NOT want to flash. I would try flashing the boot image (boot.img) first. If that succeeds, then try the TWRP recovery image.
Ok. I'm going to try again with "http://en.miui.com/forum.php?mod=viewthread&tid=196175&highlight=sp%2Btool%2Bflash%2Bredmi%2Bnote%2B2"
DarthJabba9 said:
With the SP Flash Tool, all you need is the correct "scatter" file (MT6795_Android_scatter.txt), and the image(s) that you want to flash. If the phone is vibrating, then the SP Flash Tool should be able to connect to it when you click "Download". Just make sure that you first untick everything that you do NOT want to flash. I would try flashing the boot image (boot.img) first. If that succeeds, then try the TWRP recovery image.
Click to expand...
Click to collapse
Well... Install again drivers MTK but nothing... The phone vibrates well but the PC still doesn't see ... It's late now, I look again tomorrow night.
Thanks again.
manu33xtro said:
Ok. I'm going to try again with "http://en.miui.com/forum.php?mod=viewthread&tid=196175&highlight=sp%2Btool%2Bflash%2Bredmi%2Bnote%2B2"
Click to expand...
Click to collapse
manu33xtro said:
Well... Install again drivers MTK but nothing... The phone vibrates well but the PC still doesn't see ... It's late now, I look again tomorrow night.
Thanks again.
Click to expand...
Click to collapse
Perhaps you might want to describe what exactly happens when do you what exactly?
Hi,
Ok that's what I do with an old PC with Win XP.
- install media Tek USB VCOM drivers for Win XP -> installation complete
- launch SP Flash Tool with administrator rights)
- use scatter file from Redmi Note 2 rom
- use download agent "MTK_AllInOne_DA.bin"
- press download button
- connect phone with UCB cable and waiting... and waiting...
- and I can't see it in device manager !
No way again !
I will try again...
DarthJabba9 said:
Perhaps you might want to describe what exactly happens when do you what exactly?
Click to expand...
Click to collapse
manu33xtro said:
Hi,
Ok that's what I do with an old PC with Win XP.
- install media Tek USB VCOM drivers for Win XP -> installation complete
- launch SP Flash Tool with administrator rights)
- use scatter file from Redmi Note 2 rom
- use download agent "MTK_AllInOne_DA.bin"
- press download button
- connect phone with UCB cable and waiting... and waiting...
- and I can't see it in device manager !
No way again !
I will try again...
Click to expand...
Click to collapse
Strange! I am assuming that when you connect the phone with the USB cable, the battery has been removed from the phone? If so, then it should work.
Perhaps you should try first connecting the phone, and then waiting until it has vibrated once or twice, before clicking the "Download" button?
Yes I removed battery before connect the phone to PC. I tried also with battery and nothing changed.
I even changed the cable to be sure.
Which seems to me most strange is that I see nothing in the device manager, as if the phone wasn't connected. Whatever the installed driver is the same result. I think it should at least have the phone on the COM or USB port ...
I will try again this night to be sure with all steps one by one. And I will also try with ACER tablet I and runs Android 5.1. Maybe it will be recognized.
Otherwise I also tried to pass a Linux PC as a last resort.
Thanks again for your help.
DarthJabba9 said:
Strange! I am assuming that when you connect the phone with the USB cable, the battery has been removed from the phone? If so, then it should work.
Perhaps you should try first connecting the phone, and then waiting until it has vibrated once or twice, before clicking the "Download" button?
Click to expand...
Click to collapse
manu33xtro said:
Yes I removed battery before connect the phone to PC. I tried also with battery and nothing changed.
I even changed the cable to be sure.
Which seems to me most strange is that I see nothing in the device manager, as if the phone wasn't connected. Whatever the installed driver is the same result. I think it should at least have the phone on the COM or USB port ...
Click to expand...
Click to collapse
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Hum good question. In fact I don't know. I'll ask the MIUI forum.
I got home late from work so I don't do tests tonight, I'd see it all tomorrow including the connection with my tablet ...
Thanks
DarthJabba9 said:
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Click to expand...
Click to collapse
Hi,
I tried to connect with an Acer Tablet with Android 5.1.1 but nothing appends...
I tried also with a Linux PC (Debian) and if I can see a Samsung A3 phone dirrectly, no way for my Redmi Note 2...
There really I despair : I think I can't access any of the phone. Can't do anything !
If you have any other solution but you help me a lot already, and thanks for that.
Can be a micro crack on the USB plug into the phone if it's not a software problem ... Let's go for it apart and look at this ...
Thanks again bro.
Manu
DarthJabba9 said:
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Click to expand...
Click to collapse
manu33xtro said:
Hi,
I tried to connect with an Acer Tablet with Android 5.1.1 but nothing appends...
I tried also with a Linux PC (Debian) and if I can see a Samsung A3 phone dirrectly, no way for my Redmi Note 2...
There really I despair : I think I can't access any of the phone. Can't do anything !
If you have any other solution but you help me a lot already, and thanks for that.
Can be a micro crack on the USB plug into the phone if it's not a software problem ... Let's go for it apart and look at this ...
Thanks again bro.
Manu
Click to expand...
Click to collapse
I don't think it is a crack on the USB plug. It seems to me to be a low-level driver problem - ie, the drivers on the phone that are active when the phone is not (fully) booted up. I don't have the right terminology for these drivers, but they are possibly part of the bootloader. If that is the problem, then I don't know how you would solve this problem.

Is there any way to fix this? No Usb-Debugging, Bootloop, etc...

Hello guys,
im starting to lose hope that my phone will ever get to work again. I tried flashing a rom via TWRP, which led into a bootloop. After that I tried flashing another version of TWRP, which let to the fact, that everytime I now press Power + Volume down it also gets into a bootloop and does not show up TWRP. After that I tried connecting it to my PC in Fastboot mode, but since no USB-Debugging is enabled and cant be enabled, it is also not working, even with Universal Adb drivers installed, windows does not recognize any device is connected... so my question is, if there is any hope left or my phone is just dead...
I really hope you can help me.
Leon
[email protected] said:
Hello guys,
im starting to lose hope that my phone will ever get to work again. I tried flashing a rom via TWRP, which led into a bootloop. After that I tried flashing another version of TWRP, which let to the fact, that everytime I now press Power + Volume down it also gets into a bootloop and does not show up TWRP. After that I tried connecting it to my PC in Fastboot mode, but since no USB-Debugging is enabled and cant be enabled, it is also not working, even with Universal Adb drivers installed, windows does not recognize any device is connected... so my question is, if there is any hope left or my phone is just dead...
I really hope you can help me.
Leon
Click to expand...
Click to collapse
Did you tried the Mega unbrick Guide?
Never loose hope buddy we have many devs here to help us
Try this it will help you for sure
http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
faap25 said:
Try this it will help you for sure
http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
Click to expand...
Click to collapse
Thank you for your help. I was trying to do it with this mega unbrick guide, but at step 4 I connected it to my pc and the device manager didn't show up anything. Do I need to install any drivers before doing that or uninstall the adb drivers I previously installed?
Thank you
Finally it worked! The problem was the usb cable I was using!

Categories

Resources