my tg01 wont start after win 7 .....and no charge .....what can i do?.....it's my favorit phone ......... when i want to start him ..he just blinking the red led ...and nothing more ...(( sorry for bad english ,im from romania
crosz7 said:
my tg01 wont start after win 7 .....and no charge .....what can i do?.....it's my favorit phone ......... when i want to start him ..he just blinking the red led ...and nothing more ...(( sorry for bad english ,im from romania
Click to expand...
Click to collapse
you must charge battery.
Connect via USB, and wait... when u phone start, write him in Bootloader Menu(+- Volume), select USBfnSerial, save, and wait for green LED
well.....when i wont to start him i se green led but black screen ...and vol+.- plus power dont work ...just camera and power for blue led and black screen
Hello
I had exactly the same problem and after 3 days of trying different things managed to get back to WM 6.5
I believe black screen and blue LED means you are in Bootloader mode, I followed this from 3.
wp7 can get back to wm6 now £¬Cheer
The test is successful
TG01 and T01A
very important
you need backup your EFS2.BIN£¨imei£©¡£¡£
Demo Video for writer All bootloader, os, falsh back
1/wm6 to wp7 bootloader
Short pin 1,3 or 0321rom Camera+Power ,on Download mode,use TG-Downloader
file tg01 wm6 Update wp7 Bootloader.bin, no os
http://cn.ziddu.com/download/625263/wp7boot.rar.html
demo video
http://cn.ziddu.com/download/625310/...7boot.rar.html
2.flash wp7 os
Camera+Power(Blue led) ,on Download mode,setup acer f1 driver ,use ZTEiT Common downloader(select multi—download, not backup)
or other tool(qpst / acer euu etc..)
need file flash.bin(os.nb) ,NPRG8650.hex,partition.mbn.
file: http://cn.ziddu.com/download/625315/WP7os.rar.html
demo video:
http://cn.ziddu.com/download/625311/flashos.rar.html
3. wp7 to wm6 bootloader and flash 6.5 os
Camera+Power(Blue led) ,on Download mode,use ZTEiT Common downloader (select multi—download, not backup)
need file NPRG8650.hex,partition.mbn. dbl.mbn,fsbl.mbn,osbl.mbn
After finished 6.5boot,(Connect the pc Re),then,
Camera+Power Download mode,
dirver is Toshiba Download Port com,
If not, please replace,,
use TG-Downloader,flash the rom for 6.5...
file: http://cn.ziddu.com/download/625316/WM6boot.rar.html
demo video
http://cn.ziddu.com/download/625312/wp7-wm6.rar.html
TOOLS file: http://cn.ziddu.com/download/625313/TOOLS.rar.html
If you want to be able to flash other ROMS from your SD card you will need to convert any tsw file to a bin file. Follow this and you should be ok. If not I'm willing to sort it out for you but you will need to send me your phone. I live in the UK
and qpst wont work he sey: qpst can't connect vaio atlas server //my laptop is a vaio
men help me i cant't instal botloader ......i flashed the phone and win7 dont work ...and i want to reinstal botloader with tg downloader and i cant what can i do ?
crosz7 said:
men help me i cant't instal botloader ......i flashed the phone and win7 dont work ...and i want to reinstal botloader with tg downloader and i cant what can i do ?
Click to expand...
Click to collapse
NOT WITH TG DOWNLOADER! YOU NEED THIS STEPS BEFORE:
to get the 6.5.x Bootloader:
go in bootloader mode Camera+Power (Blue led) ,on Download mode,use ZTEiT Common downloader (select multi—download, not backup)
need file NPRG8650.hex,partition.mbn. dbl.mbn,fsbl.mbn,osbl.mbn
After finished you have the 6.5 bootloader. NOW charge your battery 5-6 hours full!!!
Prepare a 6.5.x .TSW ROM as .BIN ROM
TSW TOOLS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Toshiba_TSW.zip - encoder/decoder for tsw files / bin files
tnx http://cotulla.pp.ru/Misc.html
- browse to your toshiba ROM .tsw, then select Toshiba TG01 and you get a toshiba ROMas .bin file- ready to flash with TG Downloader
use/install TG-Downloader + Toshiba drivers. bring with Camera+Power to Download mode use TG-Downloader to flash the 6.5 BIN ROM
the tools + files + tut you find here: toshiba tg01 WP7 ROM
mirolg said:
NOT WITH TG DOWNLOADER! YOU NEED THIS STEPS BEFORE:
to get the 6.5.x Bootloader:
go in bootloader mode Camera+Power (Blue led) ,on Download mode,use ZTEiT Common downloader (select multi—download, not backup)
need file NPRG8650.hex,partition.mbn. dbl.mbn,fsbl.mbn,osbl.mbn
After finished you have the 6.5 bootloader. NOW charge your battery 5-6 hours full!!!
Prepare a 6.5.x .TSW ROM as .BIN ROM
TSW TOOLS
Toshiba_TSW.zip - encoder/decoder for tsw files / bin files
tnx http://cotulla.pp.ru/Misc.html
- browse to your toshiba ROM .tsw, then select Toshiba TG01 and you get a toshiba ROMas .bin file- ready to flash with TG Downloader
use/install TG-Downloader + Toshiba drivers. bring with Camera+Power to Download mode use TG-Downloader to flash the 6.5 BIN ROM
the tools + files + tut you find here: toshiba tg01 WP7 ROM
Click to expand...
Click to collapse
Hi Mirolg,
What do you do when ZTEiT Common downloader doesn't detect your phone? I tried qpst but it doen'st detect either. The computer detects Incorporated Qualcomm CDMA Technologies MSM pilot from the phone but that's it.
Thanks
jonslayer0 said:
Hi Mirolg,
What do you do when ZTEiT Common downloader doesn't detect your phone? I tried qpst but it doen'st detect either. The computer detects Incorporated Qualcomm CDMA Technologies MSM pilot from the phone but that's it.
Thanks
Click to expand...
Click to collapse
before I install ZTEiT Common downloader, I install the ACER Driver too- then detect the device ....
mirolg said:
before I install ZTEiT Common downloader, I install the ACER Driver too- then detect the device ....
Click to expand...
Click to collapse
Thanks Mirolg it worked. But I had to do it with a round about method (lol):
-I have XP 32 installed on a virtual box cause tg downloader wasn't working with seven,
-BUT the acer drivers wouldn't install on XP so I had to install them and common downloader on seven, and common downloader detected my phone.
-Then I flashed the wm6 bootloader on seven,
-switched to XP to flash 321 rom. A real mess I tell you.
-Now I'm going to wait till my phone is fully charged and try to flash to wp7.
Again thanks a lot Mirolg
jonslayer0 said:
Thanks Mirolg it worked. But I had to do it with a round about method (lol):
-I have XP 32 installed on a virtual box cause tg downloader wasn't working with seven,
-BUT the acer drivers wouldn't install on XP so I had to install them and common downloader on seven, and common downloader detected my phone.
-Then I flashed the wm6 bootloader on seven,
-switched to XP to flash 321 rom. A real mess I tell you.
-Now I'm going to wait till my phone is fully charged and try to flash to wp7.
Again thanks a lot Mirolg
Click to expand...
Click to collapse
uuuoo what for a confused but cool solution - RESPECT!
THX for everyone ....my tg01 is work ...sory for bad english
Maybe olly could revive his device by this method?
crosz7 said:
THX for everyone ....my tg01 is work ...sory for bad english
Click to expand...
Click to collapse
tnx for the good news - but how exactly have you get it works? please be
collegial an explain it a little bit more- maybe it will helps other .....
men now i have a major problem
i instalated my windows 7 and i dont like it and i instalated bot loader for win 6.5 using comon downloader and every thing goes ok ....and now i must instal win 6.5 bin with tg downloader but i can't he stock on 20%
yes it does crash just keep forsing it to close and re open tg downloader it took me about 4 times before it started
to work haha
I've got the same problem.
Followed the qinwengui guide and downloaded all the files from that thread.
I can load the boot loader and then use Common Downloader to load the WP7 image.
It appears to complete but WP7 doesn't boot.
I can then put the phone into bootloader mode and go back to 6.5, no problem.
Done this 2 or 3 times with the same result - no boot.
My phone is currently on charge with the 321 6.5 image, awaiting the next attempt...
The WP7 package from the qinwengui thread only contains 3 files:
flash.bin
NPRG8650.hex
partition.mbn
Nokser's threads mention the following files:
1.dbl.mbn
2.fsbl.mbn
3.osbl.mbn
4.amss.mbn
5.apps.mbn – this file you must uncheck
6.appsboot.mbn
7.flash.bin
8.dsp1.mbn
which I don't have and can't find
I assume the partition.mbn contains the appropriate information but I'd still like to try with the other files as this may be the issue wih my phone.
Also I can't find tsunagi_ffu.exe - does anyone have a link as I'd like to try that method as well.
Thanks.
Please help me!
I had to downgrade to 6.5 but with common after flash downloader wm6 boot files can not flash the system! with tgdownloader I do not recognize the phone even if it is in downloader mode!
Edit:
The process is blocked in Phone state beign confirmed 20%
Edit:
I try to refresh the boot but nope... error: DL.Nop fail
---------- Post added at 01:53 AM ---------- Previous post was at 01:10 AM ----------
Originally Posted by PATITOPATITO View Post
I have the BATT charged... Now what should i do.... If i put the tg download with a 6,5 bin, the aplicationsais locked...xd.
If i try to put bootolade 6,5 with common downloader, the phone is detected and stops at 20%...the light goes to blue...but nothing happends.
Any idea?
idem... do you have solved?
I reloaded and now the phone does not go into bootloader .. the light stays red... if i press camera + power the phone go into bootloader for 5 sec...
With other battery the phone stay in bootloader mode but common downloader and tgdownloader doesn't start the flash... any idea?? help pls
i Try with qpst but the phone change the color of led... Now the light stays red even with this battery...! i think my battery don't charging
First charge your batt. I have made a usb charger for the batt with the help of this site method.
USB CHARGER.
Cut the head of a usb you had (a spare one you have)Normally they have 5 wires inside the cable.
Put the red wire to + of the batt , and black to the - (both are marked in the batt). Do not put ANYTHING in the middle pole of batt or it will be damage.
I sticked the wires with fix type. Very easy.
Leave charging a couple of hrs.
No that you have the batt charge, put it on the phone and see thats happend for sure.
Br I hope this tip helps.
Patito
PATITOPATITO said:
First charge your batt. I have made a usb charger for the batt with the help of this site method.
USB CHARGER.
Cut the head of a usb you had (a spare one you have)Normally they have 5 wires inside the cable.
Put the red wire to + of the batt , and black to the - (both are marked in the batt). Do not put ANYTHING in the middle pole of batt or it will be damage.
I sticked the wires with fix type. Very easy.
Leave charging a couple of hrs.
No that you have the batt charge, put it on the phone and see thats happend for sure.
Br I hope this tip helps.
Patito
Click to expand...
Click to collapse
You know that overcharging battery may cause it to explode really? Couple of hours is TOO MUCH.
Related
I've flashed my TG01 with a regular ROM, everything went normal except it comes to booting part. So my problem is, device is not booting, not charging, and not recognizing by any PC's I've tried. I guess I really messed up this time.
What can I do? In my country TG01 is not officially announced, so the Services I've tried could'nt fix the problem. I'm at my own I think. But with your help I can make this device to return life.
Thanks in advance, I'm really desperate right now...
El Diablo said:
I've flashed my TG01 with a regular ROM, everything went normal except it comes to booting part. So my problem is, device is not booting, not charging, and not recognizing by any PC's I've tried. I guess I really messed up this time.
What can I do? In my country TG01 is not officially announced, so the Services I've tried could'nt fix the problem. I'm at my own I think. But with your help I can make this device to return life.
Thanks in advance, I'm really desperate right now...
Click to expand...
Click to collapse
Don't worry, I've seen the worse and facing worse than yours.
A little read through the forum would have definitely solved your issue. However, I do understand that under such circumstances, you want to get to the solution quick. Here it is:
When you say not charging - can you see RED LED light flash or even appear when you plug to PC -(I think not)?
If your answer is NO, then follow on and try this
There you go, my last bit of help before I loose my TG01 forever!
El Diablo said:
I've flashed my TG01 with a regular ROM, everything went normal except it comes to booting part. So my problem is, device is not booting, not charging, and not recognizing by any PC's I've tried. I guess I really messed up this time.
What can I do? In my country TG01 is not officially announced, so the Services I've tried could'nt fix the problem. I'm at my own I think. But with your help I can make this device to return life.
Thanks in advance, I'm really desperate right now...
Click to expand...
Click to collapse
Explain something. You normally flashed it via tg01_sddl+.exe , bootloader appeared, after few minutes it showed "...succesfully and will be restarted....." and after reset nothing happened ? You still have black screen ? It is strange that charger does not work. Maybe tg01 is still in booting phase but wrong flashing cause it is not able to display even Toshiba logo ? Did You try to remove battery, put it again and plug charging cable to see whether charging is working ? ( Do not press ON button when You put battery back )
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Explain something. You normally flashed it via tg01_sddl+.exe , bootloader appeared, after few minutes it showed "...succesfully and will be restarted....." and after reset nothing happened ? You still have black screen ? It is strange that charger does not work. Maybe tg01 is still in booting phase but wrong flashing cause it is not able to display even Toshiba logo ? Did You try to remove battery, put it again and plug charging cable to see whether charging is working ? ( Do not press ON button when You put battery back )
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
The reason, I understood few months back from one of the mates who works in a repair centre (not toshiba):
This is semi-bricked TG01, hence it will show a faint white light when you tilt the phone, but won't show Toshiba logo AND won't charge.
The TG01 looses 'bootloader' and hence forgets to even boot - this occurs in 'fully' bricked TG01. TG01 not charging is a bad sign, especially when you don't even see 'toshiba' screen.
If you see that screen but don't see RED LED (i.e. not charging/ not being recognized) - you can still get it back using 'short pin' or 'unbrick method'
Thank you both for the fast and useful replies.
drupad2drupad,
No, I don't see any light even.
fxdjacentyfxd,
I always use the Short PIN method to flash my device. It's past over one month, maybe I remember it wrong.
BTW, the methods you linked needs to TG01 recognizes by PC, right? But I've tried with two PC's, one uses Win7 and the other one uses XP. Both does not recognize the device.
El Diablo said:
T
I always use the Short PIN method to flash my device. It's past over one month, maybe I remember it wrong.
Click to expand...
Click to collapse
In normal working tg01 I would afraid to utilize permamently 3-pin method. In my oppinion one should utilize it only with problems with tg01 because this pins are connected somewhere to the hardware. It is very easy to cause electrostatic shock and simply damage whole device. For good cooked roms tg01_sddl+.exe is the best solution because it is none intrusive method. Anyway, Huston we have problem.
Regards
fxdjacentyfxd
You are right, but I tried it almost hundred times, but couldn't managed to flash via tg01_sddl+.exe. So there is only one option to flash my device.
El Diablo said:
You are right, but I tried it almost hundred times, but couldn't managed to flash via tg01_sddl+.exe. So there is only one option to flash my device.
Click to expand...
Click to collapse
What happened in the past You are not able to utilze tg01_sddl+.exe ? It sounds rather strange for me that in good working tg01 such methods may not work .
Reagrds
fxdjacentyfxd
It always says "Error occurred during system reset".
I've never managed to run it properly...
What are you suggesting in this situation? Can it be resurrected?
El Diablo said:
You are right, but I tried it almost hundred times, but couldn't managed to flash via tg01_sddl+.exe. So there is only one option to flash my device.
Click to expand...
Click to collapse
El Diablo - it might be a bad news. If there is no red light on top and the short pin doesn't work - it might be bricked (sorry! )
However - do you see a faint white back light on the screen - tilt your phone side ways and you should see white brightness on screen - if it does this - I think (from what I remember) - you can revive this but it might be the case that your battery is draining now - PLEASE TRY TO CHARGE YOUR BATTERY SOMEHOW BECAUSE IF BATTERY DRAINS OUT WHILE TRYING TO FLASH, YOU WILL DEFINITELY BRICK THE PHONE (IF IT IS NOT YET!)
If you don't see this back light and you no red light - it IS bricked. Only option finding the bootloader file - which is DAMN hard to find. When I bricked my first TG01, I never managed to find this file
OR
You might be able to get this working by sending it to a toshiba repair center. I do understand there is none where you live, but sending it by courier might be another option.
I hope you can revive the phone - I feel the pain
drupad2drupad said:
If you don't see this back light and you no red light - it IS bricked. Only option finding the bootloader file - which is DAMN hard to find. When I bricked my first TG01, I never managed to find this file
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
yes is 100% bricked! BUT this is 100 % the solution (with tg01.bin file (unzip) bootloaderfile)
2. LCD Display stay black (or verry dim black light) and when plug it in to charge No red LED flash, not possible to RESET OR Hard RESET
= unbrick method= TG Downloader over PC connection with user manual in german (pls translate with google translator for other language) contains: TG01 Downloader TG01 Driver TGTool
and here the needed bin file: tg01.bin file (unzip)
drupad2drupad said:
El Diablo - it might be a bad news. If there is no red light on top and the short pin doesn't work - it might be bricked (sorry! )
However - do you see a faint white back light on the screen - tilt your phone side ways and you should see white brightness on screen - if it does this - I think (from what I remember) - you can revive this but it might be the case that your battery is draining now - PLEASE TRY TO CHARGE YOUR BATTERY SOMEHOW BECAUSE IF BATTERY DRAINS OUT WHILE TRYING TO FLASH, YOU WILL DEFINITELY BRICK THE PHONE (IF IT IS NOT YET!)
If you don't see this back light and you no red light - it IS bricked. Only option finding the bootloader file - which is DAMN hard to find. When I bricked my first TG01, I never managed to find this file
OR
You might be able to get this working by sending it to a toshiba repair center. I do understand there is none where you live, but sending it by courier might be another option.
I hope you can revive the phone - I feel the pain
Click to expand...
Click to collapse
No, the phone's is acting like a stone actually. Thanks for your time and good wishes.
mirolg,
But PC's do not recognize the TG01. I've read the instruction manual, TG01 need to be plugged in a USB port, right? That means the PC MUST recognize the TG01 as I understood.
But, are you saying I can still revive my device?
El Diablo said:
But PC's do not recognize the TG01. I've read the instruction manual, TG01 need to be plugged in a USB port, right? That means the PC MUST recognize the TG01 as I understood.
Click to expand...
Click to collapse
Does PC "says" something after tg01 usb plugin ? ( any sound , message ).
Frankly speaking I was not able to utilze this method too because my XP detects tg01 in wrong way. I have few sounds and after several seconds device disappears completely from XP. It was even when my tg01 was not "bricked" - from time I bought it. After my first ( and so far last ) "brick" nothing changed - fortunately 3-pin method works . But I have any PC answer . You have not any ?
Regards
fxdjacentyfxd
No, there is no notification sound, message, nothing pop ups.
El Diablo said:
No, the phone's is acting like a stone actually. Thanks for your time and good wishes.
mirolg,
But PC's do not recognize the TG01. I've read the instruction manual, TG01 need to be plugged in a USB port, right? That means the PC MUST recognize the TG01 as I understood.
But, are you saying I can still revive my device?
Click to expand...
Click to collapse
my t01 was two times full bricked (i´m a hardcore cook ) , such your tg01. i have revive my device!
install the tg downloader and tg01 driver load my tg01.bin and put in the same folder. before conect tg01 over usb with pc, start tg downloader. select TG01W (ignore error) and ok.browse program file to tg01.bin (ignore error) connect your tg01. in port display tg01 and start. led flash in different colors. wait, wait, wait. finish!
mirolg said:
my t01 was two times full bricked (i´m a hardcore cook ) , such your tg01. i have revive my device!
install the tg downloader and tg01 driver load my tg01.bin and put in the same folder. before conect tg01 over usb with pc, start tg downloader. select TG01W (ignore error) and ok.browse program file to tg01.bin (ignore error) connect your tg01. in port display tg01 and start. led flash in different colors. wait, wait, wait. finish!
Click to expand...
Click to collapse
I did every step you've said, but neither the TGDownloader recognizes the device, so I can't start the update.
you have also to switch on the tg01.
Of course I tried to switch on TG01. But nothing happened.
But I must say that it's like something of device's hardware "shaking". I can feel the squezing in it. Any ideas?
Maybe the battery has not good contact? When you remove the back cover, can you move the batt with your fingers?
El Diablo said:
Of course I tried to switch on TG01. But nothing happened.
But I must say that it's like something of device's hardware "shaking". I can feel the squezing in it. Any ideas?
Click to expand...
Click to collapse
Ok. you not see red led or other BUT if your LCD Display stay black (or verry dim black light)
then tg01 is ON
how to to wp7 bootloader needed files + miRom 7 radio 0321 as .tsw (if is not rename it to tg01wp_00.tsw)
read this first or if you have problems tnx avathar
1. make sure your battery are 100% FULLcharged!
2. copy flash the wm6.5 rom with 0321 radio to SD card PRG folder. Copy tg_ssdl.exe + tg_ssdl+.exe in the same folder
3. press on tg_ssdl+.exe to start the download
4. after 20 min. you have wm 6.5.x OS with 0321 radio.
5. Install tg downloader and the 32 bit driver. By first screen check all three rom variants
6. DownLoade Modus1: turn device off, pull battery out/in, then press and hold Camera + Power button (you get white led)
7. Start tg downloader. If you get a error window, press ok
8. connect your device + pc over usb
9. select over browse the file from wp7bootloader folder
10. Start download. on the 99% stay 1-2 min. PLEASE wait the 100% and the auto reboot
NOW you have the wp7bootloader and you able to flash wp7 rom
how to to flash wp7 rom if you allready on wp7 needed files
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wp7 rom flash.zip
1. DownLoade Modus2: turn device off, pull battery out/in, then press and hold Camera + Power button (you get Blue led)
2. Install ZTEiT Common downloader and install the acer f1 driver
3. copy a wp7 rom, flash.bin in wp7OS_files
4. run ZTEiT Common downloader (select multi—download), browse to wp7OS_files folder and select him (check with advanced if the three files are set)
5. press START all and wait 20 - 28 min.
now you are on wp7 OS (if you like later to flash a other wp 7 rom, do the steps from howto to flash wp7 rom)
Now do this at end FIX 3G /RADIO SIGNAL
from wp7 to wm6 bootloader and flash back to 6.5 OS
ok i have managed it with few times (today) with succes: Charge your battery 100% full (few hours!)
(if is not possible to charge the battery in the phone read this)
needed TOOLS ( ZTEiT Common downloader, Tg downloader and Toshiba_TSW)
Prepare a 6.5 rom as .bin ROM with Toshiba_TSW browse to your exist 6.5 tsw rom, select Toshiba Tg01, press decode= you get a 6.5 bin ROM (or download my miROM7 Radio 0321as .bin)
1. TOOL ZTEiT Common downloader (get the 6.5 bootloader back- no OS)
1.1 turn the phone off
1.2 pull battery out/in, press Camera+Power button= Blue led go on ,you are on wp7 Download mode
1.3 Connect usb
1.4 run ZTEiT Common downloader (select multi- download) (to use you have to install the ACER F1 driver x86)
1.5 go to browse and select the folder
downgrade_WM6_boot.zip with the needed files
1.6 press advanced to check the selected files NPRG8650.hex, partition.mbn. dbl.mbn,fsbl.mbn,and osbl.mbn
1.7 press start all
after few seconds you got a white led, then close ZTEiT Common downloader, cut the usb connection
1.8 take the battery out (for few seconds) then press and hold the Camera and then the press and hold the Power button= white led go on
2 TOOL tg downloader (flash a 6.5 ROM)
2.1. run tg downloader (if get a error press ok)
2.2. connect your phone over usb- the programm recognize Toshiba download Port com
2.3. select browse your prepared 6.5 BIN ROM (if get a error press ok)
2.4. press Start Download, download starts led changing different colors. on 99% stay a while- but WAIT the 100% and it will reebot
NOW you on 6.5 OS
IT WORKS- BUT: IF the Download not start, try again step 1.8. and 2.1 -2.4
AND if the Download not start, log off/log on your pc and try again step 1.8. and 2.1 -2.4 (if is not possible to charge the battery in the phone read this)
DISCLAIMER
I will not take any responsibility for any damages caused directly or indirectly from using the software-package or the instructions. Read the instructions thoroughly and proceed carefully!
mirolg said:
from wp7 to wm6 bootloader and flash back to 6.5 OS
ok i have managed it with few times (today) with succes: Charge your battery 100% full (few hours!)
needed TOOLS ( ZTEiT Common downloader, Tg downloader)
Prepare a 6.5 rom as .bin ROM with Toshiba_TSW.zip browse to your exist 6.5 tsw rom, select Toshiba Tg01, press decode= you get a 6.5 bin ROM
1. TOOL ZTEiT Common downloader (get the 6.5 bootloader back- no OS)
1.1 turn the phone off
1.2 press Camera+Power button= Blue led go on ,you are on wp7 Download mode
1.3 Connect usb
1.4 run ZTEiT Common downloader (select multi- download)
1.5 go to browse and select the folder WM6boot with the needed files
1.6 press advanced to check the selected files NPRG8650.hex, partition.mbn. dbl.mbn,fsbl.mbn,and osbl.mbn
1.7 press start all
after few seconds you got a white led, then close ZTEiT Common downloader, cut the usb connection
1.8 take the battery out (for few seconds) then press and hold the Camera and then the press and hold the Power button= white led go on
2 TOOL tg downloader (flash a 6.5 ROM)
2.1. run tg downloader (if get a error press ok)
2.2. connect your phone over usb- the programm recognize Toshiba download Port com
2.3. select browse your prepared 6.5 BIN ROM (if get a error press ok)
2.4. press Start Download, download starts led changing different colors. on 99% stay a while- but WAIT the 100% and it will reebot
NOW you on 6.5 OS
IT WORKS- BUT: IF the Download not start, try again step 1.8. and 2.1 -2.4
AND if the Download not start, log off/log on your pc and try again step 1.8. and 2.1 -2.4
many thankst to qinwengui for his method/tools/files
Click to expand...
Click to collapse
Nice Tut., but qinwengui write only bootloader files *.mbn for *.bin file.
He not find other method upgrade etc.. then i dont understand why you write wrong info.
Nokser said:
Nice Tut., but qinwengui write only bootloader files *.mbn for *.bin file.
He not find other method upgrade etc.. then i dont understand why you write wrong info.
Click to expand...
Click to collapse
I not write a wrong info. exactly so i have do it 4 times, what files/info are wrong? in his folder WM6boot are five files: NPRG8650.hex, partition.mbn. dbl.mbn,fsbl.mbn,and osbl.mbn
you can download it and/or try it how write only bootloader files *.mbn for *.bin file?
example this line:
mirolg said:
for his method/tools/files
Click to expand...
Click to collapse
He not generate "NPRG8650.hex" file
Nokser said:
example this line:
He not generate "NPRG8650.hex" file
Click to expand...
Click to collapse
oh, sorry, your copyright and so ... I will ad microsoft, da_g, the half xda comunity and you ...
mirolg said:
oh, sorry, your copyright and so ... I will ad microsoft, da_g, the half xda comunity and you ...
Click to expand...
Click to collapse
Because I do not understand, why write some nonsense
I do not want you to thank me, but how can you thank someone who did not.
Believe me a lot of time spent on it all.
Nokser said:
Because I do not understand, why write some nonsense
I do not want you to thank me, but how can you thank someone who did not.
Believe me a lot of time spent on it all.
Click to expand...
Click to collapse
is not nonsense. I wanted to be fair to qinwengui;, I have this info + files from his thread:
qinwengui said:
3. wp7 to wm6 bootloader and flash 6.5 os
Camera+Power(Blue led) ,on Download mode,use ZTEiT Common downloader (select multi—download, not backup)
need file NPRG8650.hex,partition.mbn. dbl.mbn,fsbl.mbn,osbl.mbn
After finished 6.5boot,(Connect the pc Re),then,
Camera+Power Download mode,
dirver is Toshiba Download Port com,
If not, please replace,,
use TG-Downloader,flash the rom for 6.5...
file: http://cn.ziddu.com/download/625316/WM6boot.rar.html
demo video
http://cn.ziddu.com/download/625312/wp7-wm6.rar.html
TOOLS file: http://cn.ziddu.com/download/625313/TOOLS.rar.html
Click to expand...
Click to collapse
and he don´t write credits or copyright on this stuff- then i thank him .....
and who write partition.mbn. dbl.mbn,fsbl.mbn,and osbl.mbn and the other hounderts fils in your ROM
in your thread you don´t write the credits to other developer/manufacturer or what ...
....AND please don´t spam this IMPORTANT INFO THREAD
mirolg said:
and who write partition.mbn. dbl.mbn,fsbl.mbn,and osbl.mbn and the other hounderts fils in your ROM
Click to expand...
Click to collapse
no one ...
I build Factory Image file in parttsb.exe....
Back to 6,5 solved...
mirolg said:
from wp7 to wm6 bootloader and flash back to 6.5 OS
ok i have managed it with few times (today) with succes: Charge your battery 100% full (few hours!)
needed TOOLS ( ZTEiT Common downloader, Tg downloader)
Prepare a 6.5 rom as .bin ROM with Toshiba_TSW.zip browse to your exist 6.5 tsw rom, select Toshiba Tg01, press decode= you get a 6.5 bin ROM
1. TOOL ZTEiT Common downloader (get the 6.5 bootloader back- no OS)
1.1 turn the phone off
1.2 press Camera+Power button= Blue led go on ,you are on wp7 Download mode
1.3 Connect usb
1.4 run ZTEiT Common downloader (select multi- download)
1.5 go to browse and select the folder WM6boot with the needed files
1.6 press advanced to check the selected files NPRG8650.hex, partition.mbn. dbl.mbn,fsbl.mbn,and osbl.mbn
1.7 press start all
after few seconds you got a white led, then close ZTEiT Common downloader, cut the usb connection
1.8 take the battery out (for few seconds) then press and hold the Camera and then the press and hold the Power button= white led go on
2 TOOL tg downloader (flash a 6.5 ROM)
2.1. run tg downloader (if get a error press ok)
2.2. connect your phone over usb- the programm recognize Toshiba download Port com
2.3. select browse your prepared 6.5 BIN ROM (if get a error press ok)
2.4. press Start Download, download starts led changing different colors. on 99% stay a while- but WAIT the 100% and it will reebot
NOW you on 6.5 OS
IT WORKS- BUT: IF the Download not start, try again step 1.8. and 2.1 -2.4
AND if the Download not start, log off/log on your pc and try again step 1.8. and 2.1 -2.4
many thankst to qinwengui for his method, microsoft, da_g, the half xda comunity for developer tools and nokser .for.other files ...
Click to expand...
Click to collapse
Hi miro,
thanks for the info... I just back to 6,5. again. Very clear explanation.
I use your ROM´s but I must pass this phone to my wife, and I need a spanish version rom.Can you recommend me a spanish version. You might know some good Spanish version. There are many of good English one like yours, very fluide, but I must migrate to a Spanish one.
Thanks for your suppport and thanks again for the post.
Br
Patito
i'm in 1,8 state... white led!! but the phone stay in this state for only 5 sec... i think this is the battery...but the battery don't charging in this state... any idea??
Godric8 said:
i'm in 1,8 state... white led!! but the phone stay in this state for only 5 sec... i think this is the battery...but the battery don't charging in this state... any idea??
Click to expand...
Click to collapse
USB cable short charging
aeroflyluby said:
USB cable short charging
Click to expand...
Click to collapse
and what is it? or how can I build it?
---------- Post added at 06:26 PM ---------- Previous post was at 06:14 PM ----------
the phone does not charging because I think it goes in bootloadermode each 3 sec!LED changes from white to red each 3 sec
Godric8 said:
and what is it? or how can I build it?
---------- Post added at 06:26 PM ---------- Previous post was at 06:14 PM ----------
the phone does not charging because I think it goes in bootloadermode each 3 sec!LED changes from white to red each 3 sec
Click to expand...
Click to collapse
I will complain it about 5th time...
You cut USB cable, any type, unisolate red and black wires and put red to + and black to - in battery, wait about a minute holding it like this and check, if fails, repeat this cycle until you get battery working.
You can also check battery voltage with voltagemeter, 4.20 is 100%, 3.7 is about 60% and 3.0 is critical state assuming you damaged your cells.
Any overcharging or undercharging (more than 4.20 or less than 3.0) would make your battery funking explode...
ok i resolved the phone work perfect with 6.5 rom!! thanks all for help!!
PATITOPATITO said:
Hi miro,
thanks for the info... I just back to 6,5. again. Very clear explanation.
I use your ROM´s but I must pass this phone to my wife, and I need a spanish version rom.Can you recommend me a spanish version. You might know some good Spanish version. There are many of good English one like yours, very fluide, but I must migrate to a Spanish one.
Thanks for your suppport and thanks again for the post.
Br
Patito
Click to expand...
Click to collapse
very nice, patito
here my spanish rom miROM 10 SP
and here the ifo thread miROM10_ENG/GER/SPN
cheers, miro
Godric8 said:
i'm in 1,8 state... white led!! but the phone stay in this state for only 5 sec... i think this is the battery...but the battery don't charging in this state... any idea??
Click to expand...
Click to collapse
Just a tip ...Some might have same behavior.
when you open the tG downloader,The phone model its in the TG01W by defect. Change to TG01C. .You will see in ports option your phone conected to port . Them download.
If you leave it in tg01W option , most of the time the phone is detected but as soon as you try to update, it appears not found or port locked.
I hope this info can help you.
Br
---------- Post added at 08:33 PM ---------- Previous post was at 08:28 PM ----------
mirolg said:
very nice, patito
here my spanish rom miROM 10 SP
and here the ifo thread miROM10_ENG/GER/SPN
cheers, miro
Click to expand...
Click to collapse
Hi MIRO,
will download right now... Concerning The radio version in the file its 1800 already?.What radio version you can recomend me.
landscape scree ok with the tip in the post. Now all ok.
Thaks for the suppport
Patito
i did few time with tg01w and no problems at all
nikola92 said:
i did few time with tg01w and no problems at all
Click to expand...
Click to collapse
no matter.... normally you can select all three options ...... and if get error- ignore
PATITOPATITO said:
Just a tip ...Some might have same behavior.
when you open the tG downloader,The phone model its in the TG01W by defect. Change to TG01C. .You will see in ports option your phone conected to port . Them download.
If you leave it in tg01W option , most of the time the phone is detected but as soon as you try to update, it appears not found or port locked.
I hope this info can help you.
Br
---------- Post added at 08:33 PM ---------- Previous post was at 08:28 PM ----------
Hi MIRO,
will download right now... Concerning The radio version in the file its 1800 already?.What radio version you can recomend me.
landscape scree ok with the tip in the post. Now all ok.
Thaks for the suppport
Patito
Click to expand...
Click to collapse
yeeah, very good . I thik in the re-uploaded miROM 10 SPN ROM (tnx Pere) is my recomanded radio for your region, 1800 radio! 1600 are good foe east europa, 0300 and 0321 for UK
best regards, miro
mirolg said:
yeeah, very good . I thik in the re-uploaded miROM 10 SPN ROM (tnx Pere) is my recomanded radio for your region, 1800 radio! 1600 are good foe east europa, 0300 and 0321 for UK
best regards, miro
Click to expand...
Click to collapse
Hi
I tested today and good reception, so I wont change it.
Thanks my friend.
Br
Patito
---------- Post added at 08:06 PM ---------- Previous post was at 07:59 PM ----------
mirolg said:
no matter.... normally you can select all three options ...... and if get error- ignore
Click to expand...
Click to collapse
HiMIRO
In my case, No errors when you open the aplication and load the .bin with TG01W option, but if i press download, it appears locked and the process wont go further.
If i use option TG01 C . when you open the .bin ,the error appears, you ignore it and if i press dowload, the process goes normally.
I put the post just in case other people had the same behavior, couse they wont be able to go further (it was my case). They need to use just TG01C option
Br
Patito
[update 2013/04/10]
And it is back to life! :victory:
I still cannot believe it! I decided to have another go using the Haier W718 USB cable and guess what? The cable supplied with the Zhou Xing i9300 is basically a big piece of s****.
I can confirm that the test point which worked for me are also GND + KCOL0
I have flashed the ROM wich link yuweng supplied. Thanks, again, bro :good:
Most things work except:
1) The ribbon cable running from the volume keys to the upper board is detached and I am not sure of how to fix this. Is it crazy to "superglue" it?
2) The IMEIs are not recognised. I have tried setting them up manually (following a video from Colonel Zap and taking the digits printed underneath the battery slot). No joy, no matter what SIM card slot I try, I get "IMEI invalid". In engineer mode, under bandmode, I have actually noticed that no band is selected. I check those applicable in Spain and click on "Set", but it basically ignores it.
So I am trying to get now a new ROM, hopefully closer to our settings in Spain. I have contacted a fellow member from a Spanish forum. Fingers crossed.
Oh, I almost forgot. Since the volume keys are not working because of the detached ribbon cable, I have ported TWRP recovery for the Zhou Xing. I thought a touch screen recovery would come in particularly handy now! Here it is.
BACKGROUND STORY BELOW:
Hi all!
I softbricked my Zhou Xing i9300 (MT6577) and now it won't boot :silly:. I cannot even get into recovery mode.
The only way I can access the phone is by SP Flash Tool. Thanks to another member of this forum (Dragonevo) I got hold of the stock ROM. However, this file is in a zip format, so the kind I have seen updating from recovery mode. Only the boot.img file is found out of all the files SP Flash tool looks for. Is there a way I can get the rest of the files for SP Flash Tool from this stock ROM zip including the scatter text?
Thanks!
khankll said:
so what is the update ?
copy all the info in first post so it is easy to keep track of goings so far.
Click to expand...
Click to collapse
Thanks, khankll So here is the update on the 1st post. Sorry, but I am leaving in an hour and will be away for the whole week, so this is as much I can tell at this point.
khankll said:
the first thing is that you make it recognizable by pc .
Click to expand...
Click to collapse
At first I still got it recognised as MTK device, but right now the best I get is an "Unknown device" under USB devices (not under COM ports). This is with the phone completely assembled and battery inserted. When I dismantle the phone to try to trigger test point, no sign of life whatsoever. If I try to update the drivers, I get something like "Windows determined the best drivers are already present". I guess Windows is only detecting the device as some kind of USB memory and that is it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
khankll said:
for rom do search at china-iphone.ru forum .. also 4pda.ru ..
Click to expand...
Click to collapse
I already found a ROM thanks to dragonevo's pointer here. The problem is, I guess, this ROM is in a format to be used when you can boot into Recovery mode. I say "I guess" because I have never got to see Recovery mode on this phone. I am not even sure of the key combination (tried Power & Volume + and Power & Volume -). I am using SP Flash Tool and it looks first for a scatter text file, and several other files that are not in that ROM zip, (only the boot.img is there). And from what I gather all these files also are specific to the phone model.
This is why I raised my original question in this post, so that I could use the ROM found in Flash Tool.
khankll said:
try all the connections to be ok .. usb connector should be making proper connection .. try checking continuity b/w the pins inside connector and the point where they attach to pcb.. ( u can attach a thin wire to the probe of multimeter and insert that into usb port .. its hard but possible . i did checked like it ..)
Click to expand...
Click to collapse
I am not sure I get this, but I will try when I get back in one week
khankll said:
also what is the battery voltage ? is it charged ?
Click to expand...
Click to collapse
2.9 v (I have a spare one which reading is 4.1 v)
Reminder: when I try the test point, the battery is not present (it cannot be since the board has to be completely dismantled on this phone to access KCOL and GND points. commonwarrior has another phone model but exactly the same board and it has worked for him this way. If I got this right, the battery is not required and Flash Tool (since yesterday I am using the latest supplied by commonwarrior) actually has an option called "Autodetect", which is supposed to work either way, with and without battery). file is in a zip format, so the kind I have seen updating from recovery mode. Only the boot.img file is found out of all the files SP Flash tool looks for. Is there a way I can get the rest of the files for SP Flash Tool from this stock ROM zip including the scatter text?
Thanks!
[update 2013/02/14]
Sorry about vanishing, guys. I actually bumped into a bigger problem. My PC hard disk crashed. Anyway, I recovered my older (and smaller capacity) hard disk and installed it. As to the OS, I have just installed Ubuntu 12.04 + Windows XP as a virtual machine. I am a novice to Ubuntu, so please forgive me if the ending of this story is still delayed as I have other priorities to take care of right now.
Thanks a bunch again to yuweng for the correction for the test point and finally the files to flash from SP Flash Tools. I have downloaded the files and will have another go when I get the chance.
To be continued...
[update 2013/02/18]
I am afraid I am giving up on the Zhou Xing. No matter what test point I try, I never get any response in Flash Tool (I have also tried different versions including the latest one uploaded by commonwarrior).
With all the handling, the flat small cable that runs from the Volume up and down keys is detached from the contacts on the main board and I cannot see how I could weld these back.
So I am closing this chapter on my end. I hope it has been helpful to other people. At least now we have the files to flash from Flash Tools for this phone model. I wish we had found them before I screwed it completely.
Thanks again for all your help, particularly to yuweng and commonwarrior
Zhou xing bricked.
2x1 said:
Hi all!
I softbricked my Zhou Xing i9300 (MT6577) and now it won't boot :silly:. I cannot even get into recovery mode.
The only way I can access the phone is by SP Flash Tool. Thanks to another member of this forum (Dragonevo) I got hold of the stock ROM. However, this file is in a zip format, so the kind I have seen updating from recovery mode. Only the boot.img file is found out of all the files SP Flash tool looks for. Is there a way I can get the rest of the files for SP Flash Tool from this stock ROM zip including the scatter text?
Thanks!
Click to expand...
Click to collapse
I bricked my Zhou xing.
It's dead...
I followe the system explained here http://forum.xda-developers.com/showthread.php?p=34912486#5...but I don't know exactly the test point on the mother board...so without success
Do you know a system to enter again in recovery ? also by spflash?
Could you shared the original rom..please.?
Thanks in advance...in this moment I'm in a big panic:crying:
pigu36 said:
I bricked my Zhou xing.
It's dead...
I followe the system explained here http://forum.xda-developers.com/showthread.php?p=34912486#5...but I don't know exactly the test point on the mother board...so without success
Do you know a system to enter again in recovery ? also by spflash?
Could you shared the original rom..please.?
Thanks in advance...in this moment I'm in a big panic:crying:
Click to expand...
Click to collapse
Sorry, pigu36, I actually never got into Recovery mode. I flashed mine (and softbricked it) with SP Flash Tool.
Regarding the stock ROM, you will find the link in Dragonevo's post.
Maybe in that same thread, somebody will be able to tell you how to get into Recovery mode. As far as I am concerned, I have tried pressing "Power + Volume up" keys, but it has never worked.
Whatever I find out, I will share it here and in the other thread.
Good luck!
so whats the issue of playing with test points if u can make it detect thorugh spf ?
just search for ok rom and flash it ..
khankll said:
so whats the issue of playing with test points if u can make it detect thorugh spf ?
just search for ok rom and flash it ..
Click to expand...
Click to collapse
Sorry about the confusion, khankll.
This was before I tried to flash something else because I thought it could not get worse and maybe I could flash some kind of Recovery which would allow me to update from the SD card (where I have a copy of the stock ROM in a zip file).
However... things could get worse and they did. The phone is not detected any more even in SP Flash Tool, not charging... well you know the symptoms. So I found the test point thread and fingers crossed with all the advice you guys are helping with
If I am lucky with the test point method, I will still need the type of files SP Flash Tool looks for. Unless you know a way of getting them (converting repacking, I don't know what the right word would be) from the stock ROM zip file.
Model: ZhouXing I9300 MTK6577 Dual Core Android 4.0 3G GPS 4.7 Inch 8.0 MP Camera Smart Phone
Some pics
so what is the update ?
copy all the info in first post so it is easy to keep track of goings so far.
the first thing is that you make it recognizable by pc .
for rom do search at china-iphone.ru forum .. also 4pda.ru ..
try all the connections to be ok .. usb connector should be making proper connection .. try checking continuity b/w the pins inside connector and the point where they attach to pcb.. ( u can attach a thin wire to the probe of multimeter and insert that into usb port .. its hard but possible . i did checked like it ..)
also what is the battery voltage ? is it charged ?
2x1 said:
Is there a way I can get the rest of the files for SP Flash Tool from this stock ROM zip including the scatter text?
Thanks!
Click to expand...
Click to collapse
Sent you pm previously & notice that you haven't been online since 8th February 2013 08:20 AM...
Good news, found your Stock ROM here, credits to Анатолий... :laugh:
it turns out the testpoint KCOL0 & GND is wrong, credits to orx65...
Hopefully, this infos here will be useful for Zhou Xing users to unbrick their device too... :fingers-crossed:
Cheers...
Many, many, thanks for this rare rom. So I was able to unbrick my phone without any hardware experiments. I searched several Weeks!
My only problem is, that there is no touchscreen-response.
Any Idea to solve this problem?
Thanks and regards
Herby53
Hmmm, could i be that you forgot to install back the Touch Screen panel Flex Ribbon Cable...
Attach example is my friend's Touch Diamond2 9300 i help him replace the Touch Screen panel, hopefully it will be useful as a guide...
Another possibility is that may be this ROM is not for your Zhou Xing... :laugh:
Could you comfirm that the testpoint for your Zhou Xing is KCOL0 & DM
yuweng said:
Hmmm, could i be that you forgot to install back the Touch Screen panel Flex Ribbon Cable...
Attach example is my friend's Touch Diamond2 9300 i help him replace the Touch Screen panel, hopefully it will be useful as a guide...
Another possibility is that may be this ROM is not for your Zhou Xing... :laugh:
Could you comfirm that the testpoint for your Zhou Xing is KCOL0 & DM
Click to expand...
Click to collapse
Thanks for the fast response, Yuweng
I have installed back the Ribbon Cable, but not correct and without complete contacts. Now the TouchScreen works, but the touches lands not there where they should. Especially noticeable when using the phone keypad #1-3 = #4-6. I think I have to calibrate the touchscreen, but don't know how.
Second problem: the hardware- (volume up / down) - and sensor buttons (menu, home and back) are without function. I hope I did not damaged the flat cable searching the testpoint.
Your question about the testpoint:
See thread ..... / / forum.xda-developers.com/showthread.php? p = 36908056
# 240
The first image shows the backsite of the board. Testpoint for me wars KCOLO & GND to start flashtool download => there is no Point DM.
Greetings
Herby
Hmm, according to orx65 photo on previous page, its definitely not KCOL0 & GND ( the two red dots )....
Big problem ! To calibrate Touch Screen, you need to boot into Factory mode....
Shut down the phone then hold Volume Down, don't let go & press power button until you see that it boots into Factory mode then only let go... :fingers-crossed:
Then it will display all the keys that you need to press once then only you can proceed with the Factory mode calibration...
ESC, BACK, MENU, VOLUME UP, VOLUME DOWN, POWER
Thanks once more!
I first have to repair the definitly broken flat cable for the hardware buttons. It already looked a bit cracked out of delivery.
But my fingers and my soldering iron are to big. :laugh: I must look even if there's a trick!?
Testpoint:
The combination on first picture (with phone 9 ContactPoints) ist KCOLO (2nd row/ center) & GND (first row/ center) worked for me.
It's shown in the picture thereunder.
There is no Contact with DM. 3rd Row right Contact is named DP, but I don't know if this ist what you are looking for.
There is one crazy idea on repairing the Flex Ribbon Cable here with a staple... :laugh:
Can't see it clearly on those photos, so what i meant was : does KCOL0 with DP works, if not then i'll remove the photo on previous page...
... for me only KCOLO & GND works ...
Hey! You don't have ti flash it under a virtual machine. It causes problems. 1st of all, you have to download the stok rom, unpack.it on a pc with a windows installed. Install the.phone.drivers. disassembly the.phone and do a little.test point.to recognize the.flash mode. Run the.flash tool.loading the scatter file of.your stok, start the flashing in all the ports using the Automatic flag in battery section, the Preloader flag under the battery section. Also check.the usb option, just enable.the.Usb and not mpre.connetions kind. Start the flashing.in alk the ports, make.a.little test point and you.will see the loading.flashing.bar sorry for the errors in my typing.thw qwerty touch is very hard to use
Sent from my lt29i modded phone!
commonwarrior said:
Hey! You don't have ti flash it under a virtual machine. It causes problems. 1st of all, you have to download the stok rom, unpack.it on a pc with a windows installed. Install the.phone.drivers. disassembly the.phone and do a little.test point.to recognize the.flash mode. Run the.flash tool.loading the scatter file of.your stok, start the flashing in all the ports using the Automatic flag in battery section, the Preloader flag under the battery section. Also check.the usb option, just enable.the.Usb and not mpre.connetions kind. Start the flashing.in alk the ports, make.a.little test point and you.will see the loading.flashing.bar sorry for the errors in my typing.thw qwerty touch is very hard to use
Sent from my lt29i modded phone!
Click to expand...
Click to collapse
Thanks, commonwarrior
Just for the record, I never tried flashing under a virtual machine. The Ubuntu + VirtualBox set up took place after many tests under Windows 7 when my hard disk failed. I may have another go on my laptop (running Windows XP) and if I succeed, I will let you know.
Cheers!
2x1 said:
Thanks, commonwarrior
Just for the record, I never tried flashing under a virtual machine. The Ubuntu + VirtualBox set up took place after many tests under Windows 7 when my hard disk failed. I may have another go on my laptop (running Windows XP) and if I succeed, I will let you know.
Cheers!
Click to expand...
Click to collapse
This is a capture for the flash tool settings. In option, leave just the usb flag and disable the RID flags. Just copy all the options you see in this picture and start the flashing in all the ports to be sure.
Sent from my lt29i modded phone!
I solved the problem
pigu36 said:
I bricked my Zhou xing.
It's dead...
I followe the system explained here http://forum.xda-developers.com/showthread.php?p=34912486#5...but I don't know exactly the test point on the mother board...so without success
Do you know a system to enter again in recovery ? also by spflash?
Could you shared the original rom..please.?
Thanks in advance...in this moment I'm in a big panic:crying:
Click to expand...
Click to collapse
If you don´t have solved the problem I have the original Zhou xing android 4.1.1 rom flash usb cable intallation
USB problem?
Hi guys. I few weeks ago I received my Zhou Xing i9300 and everything work great, but now, some days ago it start to no be recognized by my PC.
It simply dont do nothing.
I already try a new USB cable and even try to connect to another PC here i my home, and stay won't working.
Any idea about what possibly happens?
Any help will be veeeeeery appreciated.
Ok.
If you're having problems regarding how quick COM/USB port changes, please read my solution on post 4
Story.
I bought this phone last week and he came with android 4.2.2
After 2 hours i was able to get the 4.4.2 rooted but then...
...i just installed s.th that i can´t remember that cracks my boot.img
The this is that 4.2.2 version had the bootloader cracked but the 4.4.2 hasn't. That means i can't push anything to solve my .img issue.
After a few searches i reach to htcmania witch they have 2 possible solutions for my problem. Here's the 1st and here's the 2nd.
Now.
After i spend to much time trying to install the drivers correctly (initially without success) my phone just died. I lost Lenovo logo and ended up with just a red light blinking. Witch i though...F&%K!!!
If there's anyone who ended up like me, here's the solution for a pseudo-dead-phone:
remove your battery disconecting the cable inside the phone
plug the phone into a PC through a usb cable
insert your battery back
voilá. phone back alive
Now that i was able to get lenovo logo back again...
... i need your help (Lenovo K910 fans or someone with a great idea )to understand something that's has been cracking my head.
How the hell should i put this in download mode?!
I mean. Each time i plug the usb cable into PC with the volume up pressed, the device manager was able to reach Lenovo_blabla_2008 (witch seams to be the correct port so that my phone communicate with PC) but after a brief moment it changes to lenovo_composite_adb_interface (and this one doesn't work).
Now the question itself:
When should i press and where to stop that happening?! Because when i start the phone with those keys combination the phone restarts twice and not just one.
Here is a picture with my phone in download mode.
I quickly press the download button but then the just just restarts and i loose the download mode
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GRRRRR!!!!!!
Thanks
after more than 24h pretty helpfull :good:
Hey, same probleme no download mode...only for few seconds... No chance to force them
Solution and new problem
Well...
...after all these days without any success, today i must awake with a lamp over my head
Question: If our/mine problem regarding COM/USB port is the quickness that it changes to USB how can we slow it down?!
Answer: Plug an USB extension (big) between phone and PC and...voilá
Simple, isn't it?
Now i got another problem
Probably i made some mistake between step 7th & 8th on QPST tip for our K910 on HTCMania (you may use google translator to translate from spanish into your language, but english work better) and i ended with a complete black screen that doesn't respond to power button, no red light even if i unplug battery cable inside K910.
Any sugestion?!
Thanks
Here is a pic.
As you can see, device manager sees my port as QDLoader 9008 and it stays there.
QPST Configurator sees my port COM11 but doesn't recognize phone
and eMMC Software doens't connect on DW mode and it gives me that error
check this maybe usefull
Code:
http ://lefenbbs.lenovo.c om/forum.php?mod=viewthread&tid=179762&extra=page%3D1
hadi-dvb said:
check this maybe usefull
Code:
http ://lefenbbs.lenovo.c om/forum.php?mod=viewthread&tid=179762&extra=page%3D1
Click to expand...
Click to collapse
Thank you
But apart google translator work as bad as possible i believe from wht i've read (bad) this is how use QPST, not my last problem described.
Anyway, thanks again
@Crowds,
have you a blue LED then you press VolUP and plug in the USB cable?
I had no LED, nothing, no Red, no blue.
Here i get 2 PM's from Editl, he has tried me to help, without sucess.
Here i share:
Hi,
I do not want to intruding, but I saw that you have similar problem as I had. I still cannot post on Lenovo thread as I do not have 10 posts on xda.
Your message:
“Hello, now my phone Stuck on Lenovo logo and locked bootloader, too.
had 1431_-dev on it witch unlocked bootloader and recovery from 4pda (VIBEUI_V2.0_1431_6_DEV_K910_NK_W_66FC_RR) on it
Today i flash Recovery TWRP 2.7.1.2 on it, with success... all fine.
Boot in recovery and wipe all data to install 1433_4_ST_k910_246M" from the bbs forum on it.Vol + and -
after flash i clear Cache data again.. twrp reboot and now i stuck on lenovo logo and cant acces anything,fastboot says locked.
what can i do now?
Boot with Vol+- dont work and twrp boot wont work”
Possible resolution:
I had the same problem as you are just with different rom. I have flashed RUS_VIBEUI_V2.0_1433_4_ST_K910_WC97_RR with TWRP 2.7.1.2 using standard SDfuse method. After that I wanted to flash another rom. I have entered TWRP with boot to recovery option and wipe the system, dalvik and system cache.
Tried to flash new rom over sideload option build in the TWRP but phone returned bad checksums. Immediately after, I have rebooted phone and stuck onto Lenovo screen.
Boot with Vol- and power did work and twrp boot did not work either, tried so many times. I finally find on some forum that TWRP 2.7.1.2 have a bug and that if you want to enter TWRP 2.7.1.2 you need to hook your usb cable into the phone and then hold Vol +, Vol – and power together and then to plug usb cable to computer usb port then TWRP recovery will show up.
I have succeeded after few tries on one laptop with Win8.1 pro 64bit. One odd thing is that on that Laptop I had a Lenovo drivers installed but those drivers did not recognise phone that had just TWRP 2.7.1.2 recovery even if I had use that laptop for so many time to flash the phone over adb using SDfuse method.
On the end I used another laptop with Win7 HP 64bit with installed generic adb drivers to recognise phone with just TWRP 2.7.1.2 and pushed rom thru sideload and finally I revive my phone back to original state.
I am hoping that you can revive yours as well.
If you find this solution fix your problem, please post the link on xda.
Cheers.
Click to expand...
Click to collapse
Quote:
Originally Posted by gekkorist
Hello, thanks for your message... But dont work ((( reboot after few seconds, test in 3 different Workstations with XP, 7 and vista...
I have find similar procedure on one forum. Give a try, you do not have anything to lose.
"LED bootloop is it with blank screen and blue light LED? can't boot OS and can't go into recovery.
last time i once stuck in these condition. after some trial and error manage to go into fastboot by shut down the phone (hold power button for more than 10 seconds) and then hold vol + & - then connect cable to computer (or is it vol - only)
somehow i've experienced this kind of brick few month ago. my solution was:
1. turn off the phone using the PWR + VOL UP method.
2. press both Vol UP/DOWN while the phone still turned off and plug in the usb into the computer
3. you will feel the vibration.
4. while in computer it should detect and the phone will be in fastboot mode.
5. run adb command to either load the cwm or etc
i forgot what step i choosed that time but somehow i managed to flash back the system and revive the phone."
By the way, do you have or know where to download international rom VIBEROM_V1.0_1407_2_ST_K910 ?
Thanks. Cheers.
Click to expand...
Click to collapse
Now i search a support Center in China
gekkorist said:
@Crowds,
have you a blue LED then you press VolUP and plug in the USB cable?
I had no LED, nothing, no Red, no blue.
Here i get 2 PM's from Editl, he has tried me to help, without sucess.
Here i share:
Now i search a support Center in China
Click to expand...
Click to collapse
Hi @gekkorist
First of all thank you for your feedback :good: bad that one didn't came sooner :laugh:
I don't know if you're suffering exactly as i.
Like you, i don't have red, blue, yellow, orange, gfreen :laugh: plus...NO LOGO since my last step as explained on 4th post.
If you're stuck like i was (no leds but with lenovo logo) follow this BUT plug your phone with an USB extension like i've mentioned in 4th post. I´m pretty sure with this trick this will work on any PC despite OS used.
Regarding the solutions presented by @EdiTL both cases won't work cause this time i can't even turn on (?) my phone. This is very strange since if i plug in the usb cable pc recognizes that something is plugged but can't detect on QPST despite device manager recognizes COM port as QDLoader 9008
now i try with a 5 meter cable, same issue with short detect in 9008 and go after 2 seconds back to adb. no chance with qpst.
gekkorist said:
now i try with a 5 meter cable, same issue with short detect in 9008 and go after 2 seconds back to adb. no chance with qpst.
Click to expand...
Click to collapse
That is odd
It worked with me at 1st try...sorry
I got exacly same as you had... How the hek you got it succesfull???? I´v tryed your instructions so many times and nothing (( With XP x32 and Win7x64... But I don´t have win8 as you had... :S
ekkilm said:
I got exacly same as you had... How the hek you got it succesfull???? I´v tryed your instructions so many times and nothing (( With XP x32 and Win7x64... But I don´t have win8 as you had... :S
Click to expand...
Click to collapse
I'm convinced that WIN8 had nothing to do with it.
Everyone that i've talked to when i had my problema told me to put Win98 32 bits and i've managed with Win8 64 bits so...
Check my signature and follow everything without execption.
Like i wrote there it tool me 1 entire month!!!
...and unfortunately there's no other way, except...back to Lenovo and pay
Crowds said:
I'm convinced that WIN8 had nothing to do with it.
Everyone that i've talked to when i had my problema told me to put Win98 32 bits and i've managed with Win8 64 bits so...
Check my signature and follow everything without execption.
Like i wrote there it tool me 1 entire month!!!
...and unfortunately there's no other way, except...back to Lenovo and pay
Click to expand...
Click to collapse
So what I read your sadly history., your phone dosent regodnize it ether with battery? Did you get it succesful with or without battery? Cause I read HTCmania it is possible have succes without battery, is it true? In my case it has to be driver issue or driver signatures.... I downloaded win 8 x32 and will try it tomorrow without battery. Cause I quess my battery is empty. I regodnize that when I plug the microusb to the phone a little bit, the red light shows and I quess it will charge it a bit (~5min) and after that I plug the phone to the pc it shows qualcomm QDLodaer port not usb device. But It will discharge pretty fast and then pc regodnizes it as USBdevice. So what is my question is, Is it possible make that process without battery? Thank you, I really aprechiate your help.
P.s. Sorry my bad language, and one thing is sure. I wont send phone back in china. I´ll fight on my last day with this thing
ekkilm said:
So what I read your sadly history., your phone dosent regodnize it ether with battery? Did you get it succesful with or without battery? Cause I read HTCmania it is possible have succes without battery, is it true? In my case it has to be driver issue or driver signatures.... I downloaded win 8 x32 and will try it tomorrow without battery. Cause I quess my battery is empty. I regodnize that when I plug the microusb to the phone a little bit, the red light shows and I quess it will charge it a bit (~5min) and after that I plug the phone to the pc it shows qualcomm QDLodaer port not usb device. But It will discharge pretty fast and then pc regodnizes it as USBdevice. So what is my question is, Is it possible make that process without battery? Thank you, I really aprechiate your help.
P.s. Sorry my bad language, and one thing is sure. I wont send phone back in china. I´ll fight on my last day with this thing
Click to expand...
Click to collapse
Be sure that you install the correct drivers for COM port accordly to your OS.
And yes. I played so many times with my phone trying to get back alive that I ended with an empty battery (post #6 on my thread). By that time I had to remove the battery till all process is completed and restart the phone.
Like I said it took me 1 month until I was able to do with and like you one thing was sure...I won't send it back either
Good luck...you gonna need it
Crowds said:
Be sure that you install the correct drivers for COM port accordly to your OS.
And yes. I played so many times with my phone trying to get back alive that I ended with an empty battery (post #6 on my thread). By that time I had to remove the battery till all process is completed and restart the phone.
Like I said it took me 1 month until I was able to do with and like you one thing was sure...I won't send it back either
Good luck...you gonna need it
Click to expand...
Click to collapse
That your story gives me so much hope and that spark to not give up. Like I told you earlier, if I some miracle get that phone back in business I'll bye you a BEER!
Crowds said:
Ok.
If you're having problems regarding how quick COM/USB port changes, please read my solution on post 4
Story.
I bought this phone last week and he came with android 4.2.2
After 2 hours i was able to get the 4.4.2 rooted but then...
...i just installed s.th that i can´t remember that cracks my boot.img
The this is that 4.2.2 version had the bootloader cracked but the 4.4.2 hasn't. That means i can't push anything to solve my .img issue.
After a few searches i reach to htcmania witch they have 2 possible solutions for my problem. Here's the 1st and here's the 2nd.
Now.
After i spend to much time trying to install the drivers correctly (initially without success) my phone just died. I lost Lenovo logo and ended up with just a red light blinking. Witch i though...F&%K!!!
If there's anyone who ended up like me, here's the solution for a pseudo-dead-phone:
remove your battery disconecting the cable inside the phone
plug the phone into a PC through a usb cable
insert your battery back
voilá. phone back alive
Now that i was able to get lenovo logo back again...
... i need your help (Lenovo K910 fans or someone with a great idea )to understand something that's has been cracking my head.
How the hell should i put this in download mode?!
I mean. Each time i plug the usb cable into PC with the volume up pressed, the device manager was able to reach Lenovo_blabla_2008 (witch seams to be the correct port so that my phone communicate with PC) but after a brief moment it changes to lenovo_composite_adb_interface (and this one doesn't work).
Now the question itself:
When should i press and where to stop that happening?! Because when i start the phone with those keys combination the phone restarts twice and not just one.
Here is a picture with my phone in download mode.
I quickly press the download button but then the just just restarts and i loose the download mode
GRRRRR!!!!!!
Thanks
Click to expand...
Click to collapse
Hey. I did exacly what is in your instructions (recover k910) for prepare things . Can you explane why my device show as a port but in conf QPST it just hangs on half a way? Here is screen what I mean. And yes, I installed win 8. x64 but still that anoying broblem. This is why I ask this about you beacause your battery was also drained like mine. ( I plugged the phone to the pc battery unplugged.)
Tell me what was your magical touch secret.
ekkilm said:
Hey. I did exacly what is in your instructions (recover k910) for prepare things . Can you explane why my device show as a port but in conf QPST it just hangs on half a way? Here is screen what I mean. And yes, I installed win 8. x64 but still that anoying broblem. This is why I ask this about you beacause your battery was also drained like mine. ( I plugged the phone to the pc battery unplugged.)
Tell me what was your magical touch secret.
Click to expand...
Click to collapse
That's one the of anoying problems you'll find like i.
U had to be quick enough in order that QPST won't losse COM connection.
Most probably your QPST in that "midle way" disconnects as COM wright?
Well...keep tryng...i did it for one month
Crowds said:
That's one the of anoying problems you'll find like i.
U had to be quick enough in order that QPST won't losse COM connection.
Most probably your QPST in that "midle way" disconnects as COM wright?
Well...keep tryng...i did it for one month
Click to expand...
Click to collapse
I did this. 1. (Disable signining) Installed QPST, reboot/(Disable signining). 2. Plugged phone to pc, got port/QHSUSB Bulk-> updated drivers win7x64 folder, reboot/(Disable signining). 3.Installed Lenovo drivers, (Disable signining). 5. Unpacked rom C:\bin/..6. Change the flash_local. 7. Open that Device manager and QPST config. AND THIS IS THE PART WHEN I SEE MY PHONE AS HALF A WAY PORT. It won´t dissapear there. It just connects and hangs on the half way, if i do the rest of instructions i got just emmc QPST hanging "download" and will search the device... aaaaand the result is "device not found"...
Actually, when I connect the phone to the computer it will only appear as in the picture and stays there. I do not have a big old USB cable. Do I need it for that purpose?
Hey everyone,
I think my non-rooted phone is stuck in a bootloop (device keeps connecting and disconnecting after every few seconds while connected to the PC via USB). I searched for a way to get a clean ROM install on it using SP Flash Tool (found a guide on GetDroidTips), but whenever the SP Flash Tool starts downloading, it gives me "STATUS_DA_HASH_MISMATCH" error. Does anybody know what might be causing this and what the error itself might mean?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Model: Cubot Power
Error code solution?
madis121 said:
Hey everyone,
I think my non-rooted phone is stuck in a bootloop (device keeps connecting and disconnecting after every few seconds while connected to the PC via USB). I searched for a way to get a clean ROM install on it using SP Flash Tool (found a guide on GetDroidTips), but whenever the SP Flash Tool starts downloading, it gives me "STATUS_DA_HASH_MISMATCH" error. Does anybody know what might be causing this and what the error itself might mean?
Model: Cubot Power
Click to expand...
Click to collapse
Did you find a solution to this? All generic solutions don't seem to work.
Thedonqt said:
Did you find a solution to this? All generic solutions don't seem to work.
Click to expand...
Click to collapse
Hi , i thing that firmware is wrong maybe is for the same device but for example your device has 16GB internal memory but another device with same model has 8 gb of internal storage and that way this error come up.
So what you can try here is :
1. Find Global version for your device with latest firmware if you can find.
2. Put your phone in to the charge for about 2-3 hours to make sure that battery is charged.
3. Uninstall all drivers for your device by using USBDeview (scroll down for download links)
https://www.nirsoft.net/utils/usb_devices_view.html
To uninstall your drivers for device just open the tool , find the your driver for device , right click on it and click on uninstall.
4. Reset COM Ports , and once you reset reboot your PC .
To do that see this post : https://superuser.com/questions/408976/how-do-i-clean-up-com-ports-in-use
5. Reset Windows Defender status to default.
Here you have one example: https://www.youtube.com/watch?v=5t6ES_Py8lU
6. Disable antivirus or malware protection temporary.
7. Try to use old version of SP Flash Tool like one of v5.1xxx .
For example :
https://spflashtools.com/windows/sp-flash-tool-v5-1452
or
https://spflashtools.com/windows/sp-flash-tool-v5-1548
or try with latest version:
https://spflashtools.com/windows/sp-flash-tool-v5-1904
10. Run SP Flash tool with Administrator.
11. Make sure to have this checked inside SP flash options:
-Open Sp Flash tool , go to Options :
Connection - USB ( check USB speed to "High speed" , Battery to "auto detect")
Download - Check "DA DL All with Checksum" and also "Storage checksum" if you have those.
12. Try to just hold Power button while is flashing , once is finish release the power button.
13. Try to flash with disabled driver signature.
To do that follow this post:
https://www.howtogeek.com/167723/ho...8.1-so-that-you-can-install-unsigned-drivers/
14. If the problem is still there , try on another PC or with another version of System (Windows) ....
Good Luck
Teddy Lo said:
Hi , i thing that firmware is wrong maybe is for the same device but for example your device has 16GB internal memory but another device with same model has 8 gb of internal storage and that way this error come up.
So what you can try here is :
1. Find Global version for your device with latest firmware if you can find.
2. Put your phone in to the charge for about 2-3 hours to make sure that battery is charged.
3. Uninstall all drivers for your device by using USBDeview (scroll down for download links)
https://www.nirsoft.net/utils/usb_devices_view.html
To uninstall your drivers for device just open the tool , find the your driver for device , right click on it and click on uninstall.
4. Reset COM Ports , and once you reset reboot your PC .
To do that see this post : https://superuser.com/questions/408976/how-do-i-clean-up-com-ports-in-use
5. Reset Windows Defender status to default.
Here you have one example: https://www.youtube.com/watch?v=5t6ES_Py8lU
6. Disable antivirus or malware protection temporary.
7. Try to use old version of SP Flash Tool like one of v5.1xxx .
For example :
https://spflashtools.com/windows/sp-flash-tool-v5-1452
or
https://spflashtools.com/windows/sp-flash-tool-v5-1548
or try with latest version:
https://spflashtools.com/windows/sp-flash-tool-v5-1904
10. Run SP Flash tool with Administrator.
11. Make sure to have this checked inside SP flash options:
-Open Sp Flash tool , go to Options :
Connection - USB ( check USB speed to "High speed" , Battery to "auto detect")
Download - Check "DA DL All with Checksum" and also "Storage checksum" if you have those.
12. Try to just hold Power button while is flashing , once is finish release the power button.
13. Try to flash with disabled driver signature.
To do that follow this post:
https://www.howtogeek.com/167723/ho...8.1-so-that-you-can-install-unsigned-drivers/
14. If the problem is still there , try on another PC or with another version of System (Windows) ....
Good Luck
Click to expand...
Click to collapse
Massive thank you for taking the time to reply . I was about to jump straight to finding windows 7. I'd done most of those but haven't done vthe usbdeview or couple of hers. I'll try it all in sequence later and let others know :good:
UPDATE
TOK so an update. The problem is still happening after all the steps. I've tested on a windows 8 machine and the same error code is appearing. I'll try it on 7 later though.
As some backstory to mine is my phone entered a bootloop on Friday. It was running low on storage, about 8gb free of 128gb, during the bootloop I tried the power+volume keys to "battery pull" it which rebooted the phone back to normal. Shortly after the screen appeared low-res (like it was a much older screen) and then shut off and hasn't been on since.
The red LED shows when powering, with no screen activity, the phone connects to the computer and is read as a mediatek device. Holding the power down button for around 15 seconds with the device plugged into a wall charger makes the red LED go off then back on (not a flashing led though), and when doing the same while plugged in to a pc it connects like it was just plugged in.
My phone is a Umidigi S2 Pro (only one model for it instead of different size memories etc), the firmwares have been the official ones from the Umidigi S2 Pro roms page including the other tools which is where I flashed the stock Nougat ROM from last year so those should be fine (I'll post links if that's allowed on XDA-developers?). For some stupid reason Umidigi allowed a 3rd party to develop a UmiOS version of Android and used Efuse to restrict it's rooting ability, however this didn't stop the flashing of the 2 update ROMS before.
The code displayed in SP flash tools is M6575D if that's a known trouble one?
Hm , strange maybe the image files from stock firmwares is larger or small and sp flash tool can't verify hach ...
this :
Try with this version of SP Flash tool: https://spflashtools.com/windows/sp-flash-tool-v5-1828 also use checksum from stockfirmware . And make sure that all is checked inside SP Flash tool .
But this way do like this:
- Run SP Flash Tool with Administrator.
- Load full firmware inside SP Flash tool.
- Set Option " Download Only " check just preloader and click Start .
- Now connect your phone with USB 2 ports and see what is happening .
- If the flash is done load now full firmware again and uncheck just preloader.
Let me know if you got fixed .
Good Luck
ERROR: STATUS_STOR_EXHAUST (0xC003001D)
ERROR: STATUS_STOR_EXHAUST (0xC003001D)
The storage in your device has reached end of life, please change to use new device to do operations.
ANY SOLUTION TO THIS???? TRYING TO FLASH TECNO CAMON CX.....
- Set Option " Download Only " just check preloader and click Start .
I learned something new, after investigating this is done to flash the preloader, and fix
STATUS_DA_HASH_MISMATCHIt gives that error because the preloader is flooded/bricked. there is an incorrect hash code/mismatching code between the Brom , preloader in the scatter, and the DA.
After properly unlocking SLA, DAA(Being in Brom mode), fixing the preloader, using the right DA, right Scatter file, this code should match, and the error disappears.
(Flashing the rest of the Rom without preloader becomes possible on the 2nd run)
Thank you for teaching @Teddy Lo
This error wont exist in the future, won't be relevant. But it teaches us about the function of preloader, super data, data, and hash codes.
jdd1996 said:
STATUS_DA_HASH_MISMATCHIt gives that error because the preloader is flooded/bricked. there is an incorrect hash code/mismatching code between the Brom , preloader in the scatter, and the DA.
Click to expand...
Click to collapse
Thank you. After many hours of trying to find a fix, this has helped me. It worked on SP_Flash_Tool_v5.2032_Win.