i should up rom KJ3 official Firmwares or Frankenstein Firmwares. it has different?who has reply for me?thanks
Official Vs Frankenstein
minhquan7884 said:
i should up rom KJ3 official Firmwares or Frankenstein Firmwares. it has different?who has reply for me?thanks
Click to expand...
Click to collapse
As stated by Intratech in his post -
http://forum.xda-developers.com/showthread.php?t=1075278
+++++++[Frankenstein Firmwares]+++++++
These packages below are not official firmware packages, they are Frankenstein package created due to demand for Firmware with different CSC and modems and also leaked firmware packages. KIES will not recognise the firmware so you won't be able to update to new firmware using KIES unless you flash back to a firmware meant for your device first. Otherwise there will always be Odin to use for updates
This says it all really . With Official firmware you get just that ... an officially released firmware that will be recognisable and upgradeable by Kies (although with this site availabale, I don't think Kies is an effective update method), it is probably best to re-stock your phone if you require Samsung service. These firmwares are stock and will require rooting with CFRoot -http://forum.xda-developers.com/showthread.php?t=1103399
As stated, the Frankenstein packages are modified with different CSC and modem packages and will not be recognised by Kies (or most likely Samsung) as "stock".
I have used both with no problems ... just follow the instructions on the sites
Jacko
I have up a rom in fankenstein firmware and i think it don't have diffference.i had return KI3.i see this rom is fixed,
Sent from my GT-I9100 using Tapatalk
Related
Hey guys,
I am very new to android and this forum as well
I bought my sgs2 outright from Optus Telechoice, and recently i upgraded its firmware via Kies.
This is the firmware information shown in Kies whenever the phone is connected with usb:
PDA:KG1 / PHONE:KF3 / CSC:KG1 (OPS)
it says this is my current and the latest firmware.
*NEVER rooted my phone before, phone was shipped with KE7 if not mistaken.
Ok my question starts here, i've been reading forums for quite a while, and i notice that very few user have the same firmware as mine. i wonder why?
First of all, I heard that the official 2.3.4 firmware has been released via KIES, i really like to get the update but KIES said my current firmware is the latest.
I read this sentence from:
http://forum.xda-developers.com/showthread.php?t=1075278
saying that:
These packages below are not official firmware packages, they are Frankenstein package created due to demand for Firmware with different CSC and modems. KIES will not recognise the firmware so you won't be able to update to new firmware using KIES unless you flash back to a firmware meant for your device first. Otherwise there will always be Odin to use for updates
and i found the exact same firmware version as shown in my KIES:
Optus OPSKG1 CSC: http://www.multiupload.com/EPWZTIMS1F
which proves that my current version is a kind of so called
+++++++[Frankenstein Firmwares]+++++++, which may restrict me from receiving the latest firmware.
As mentioned from the above, 'KIES will not recognise the firmware so you won't be able to update to new firmware using KIES unless you flash back to a firmware meant for your device first.'
In this case, which firmware is meant for my device?!
* I really wanted to get rid of the Optus bloatware by flashing the stock firmware PLUS get the latest official update 2.3.4 rolled out by KIES.
Can anyone please teach me how and what to do? appreciate that and thanks in advance to any who reply me.
*i am an adroid newbie pls bear with me!
Images shown in my sgs2 and KIES:
PDA:KG1 / PHONE:KF3 / CSC:KG1 (OPS)
it says this is my current and the latest firmware.
CORRECT
First of all, I heard that the official 2.3.4 firmware has been released via KIES, i
NO
i notice that very few user have the same firmware as mine. i wonder why?
Because they have flashed a later version via ODIN of stock Samsung firmware that may be a leaked version .
which proves that my current version is a kind of so called
+++++++[Frankenstein Firmwares]+++++++,
No not if you updated via Kies you are not understanding the post .
In this case, which firmware is meant for my device?!
The one you have on it is the latest for your device as installed by Kies .
I really wanted to get rid of the Optus bloatware by flashing the stock firmware PLUS get the latest official update 2.3.4 rolled out by KIES.
One Samsung path and wait for 2.3.4 to be rolled out by your network via Kies .
Or two unofficial method of updating firmware using stock Samsung firmware flashed via Odin.
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
FAQ
http://forum.xda-developers.com/showthread.php?t=1065995
Wip
http://forum.xda-developers.com/showthread.php?t=1125282
jje
JJEgan said:
PDA:KG1 / PHONE:KF3 / CSC:KG1 (OPS)
it says this is my current and the latest firmware.
CORRECT
First of all, I heard that the official 2.3.4 firmware has been released via KIES, i
NO
i notice that very few user have the same firmware as mine. i wonder why?
Because they have flashed a later version via ODIN of stock Samsung firmware that may be a leaked version .
which proves that my current version is a kind of so called
+++++++[Frankenstein Firmwares]+++++++,
No not if you updated via Kies you are not understanding the post .
In this case, which firmware is meant for my device?!
The one you have on it is the latest for your device as installed by Kies .
I really wanted to get rid of the Optus bloatware by flashing the stock firmware PLUS get the latest official update 2.3.4 rolled out by KIES.
One Samsung path and wait for 2.3.4 to be rolled out by your network via Kies .
Or two unofficial method of updating firmware using stock Samsung firmware flashed via Odin.
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
FAQ
http://forum.xda-developers.com/showthread.php?t=1065995
Wip
http://forum.xda-developers.com/showthread.php?t=1125282
jje
Click to expand...
Click to collapse
Hi,
First of all thank you for the replies.
are you sure the official 2.3.4 hasn't come out via KIES?
I read some posts regarding the official release though.
Once again from my understanding, my kind of firmware (PDA:KG1 / PHONE:KF3 / CSC:KG1 (OPS)) is actually released by Optus via KIES, it is actually more like the OPTUS (and australian phone carrier) version of this firmware, thats why there are few users compared to the majority.
So what u mean is even though others (non-optus user) might get the update BUT i have to wait for OPTUS itself to roll out the update via KIES, right?
Okay lets not talk about official 2.3.4.
AND one more thing, i would really like to remove the Optus bloatware by flashing STOCK firmware via Odin, but i have no idea which STOCK firmware i have to choose from. i'm aware that there are a lot of stock firmwares available from the link provided above, but which is the appropriate as well as the latest STOCK firmware for my unit.
Since my current firmware is PDA:KG1 / PHONE:KF3 / CSC:KG1 (OPS), obviously it is a Optus-based firmware, so which STOCK firmware do i have to choose from? what is the 'stock version' for my current firmware as listed from here:
http://forum.xda-developers.com/showthread.php?t=1075278
i am really stuck here. Hope you understand my situation.
Thanks once again mate
JVDROID said:
Hi,
First of all thank you for the replies.
are you sure the official 2.3.4 hasn't come out via KIES?
I read some posts regarding the official release though.
Links please to these posts .
Might be a China release of 2.3.4
Once again from my understanding, my kind of firmware (PDA:KG1 / PHONE:KF3 / CSC:KG1 (OPS)) is actually released by Optus via KIES, it is actually more like the OPTUS (and australian phone carrier) version of this firmware, thats why there are few users compared to the majority.
So what u mean is even though others (non-optus user) might get the update BUT i have to wait for OPTUS itself to roll out the update via KIES, right?
But that is exactly the same for alll network branded or supplied phones .
O
AND one more thing, i would really like to remove the Optus bloatware by flashing STOCK firmware via Odin, but i have no idea which STOCK firmware i have to choose from. i'm aware that there are a lot of stock firmwares available from the link provided above, but which is the appropriate as well as the latest STOCK firmware for my unit.
Stock = Samsung release so pick what you want for your area .
Since my current firmware is PDA:KG1 / PHONE:KF3 / CSC:KG1 (OPS), obviously it is a Optus-based firmware, so which STOCK firmware do i have to choose from? what is the 'stock version' for my current firmware as listed from here:
http://forum.xda-developers.com/showthread.php?t=1075278
Best match will be the Frankenstein version KG3 Android 2.3.4
as below from the same link .
XXKG3
Android 2.3.4
This package has: PDA:XXKG3| PHONE: XXKG3| CSC:XEUKD1
Download: http://www.multiupload.com/G3X5DJSUBK
Followed by CSC flash via Odin .
Optus OPSKG1 CSC: http://www.multiupload.com/EPWZTIMS1F
End result
2.3.4 stock rom debranded with CSC for your area
jje
XXKG3 Stock Kernel: http://www.multiupload.com/7LEXO574OT
Password: [email protected]
Click to expand...
Click to collapse
JJEgan said:
JVDROID said:
Hi,
First of all thank you for the replies.
are you sure the official 2.3.4 hasn't come out via KIES?
I read some posts regarding the official release though.
Links please to these posts .
Might be a China release of 2.3.4
Once again from my understanding, my kind of firmware (PDA:KG1 / PHONE:KF3 / CSC:KG1 (OPS)) is actually released by Optus via KIES, it is actually more like the OPTUS (and australian phone carrier) version of this firmware, thats why there are few users compared to the majority.
So what u mean is even though others (non-optus user) might get the update BUT i have to wait for OPTUS itself to roll out the update via KIES, right?
But that is exactly the same for alll network branded or supplied phones .
O
AND one more thing, i would really like to remove the Optus bloatware by flashing STOCK firmware via Odin, but i have no idea which STOCK firmware i have to choose from. i'm aware that there are a lot of stock firmwares available from the link provided above, but which is the appropriate as well as the latest STOCK firmware for my unit.
Stock = Samsung release so pick what you want for your area .
Since my current firmware is PDA:KG1 / PHONE:KF3 / CSC:KG1 (OPS), obviously it is a Optus-based firmware, so which STOCK firmware do i have to choose from? what is the 'stock version' for my current firmware as listed from here:
http://forum.xda-developers.com/showthread.php?t=1075278
Best match will be the Frankenstein version KG3 Android 2.3.4
as below from the same link .
XXKG3
Android 2.3.4
This package has: PDA:XXKG3| PHONE: XXKG3| CSC:XEUKD1
Download: http://www.multiupload.com/G3X5DJSUBK
Followed by CSC flash via Odin .
Optus OPSKG1 CSC: http://www.multiupload.com/EPWZTIMS1F
End result
2.3.4 stock rom debranded with CSC for your area
jje
XXKG3 Stock Kernel: http://www.multiupload.com/7LEXO574OT
Password: [email protected]
Click to expand...
Click to collapse
Yes China have the 2.3.4 already, but in The Netherlands we must wait a week
Click to expand...
Click to collapse
Hi There,
I purchased my SGS2 outright from O2 UK and I'm on a pay monthly SIM-only plan with O2. The phone came loaded with the stock O2 UK firmware and whenever I connected it to Kies it would recognize the firmware and say that the current firmware is up to date, which was fine. Since then I have played around with rooting my phone, installing different mods and installing newer stock samsung firmwares to try out Android version 2.3.4. etc.
After all this playing around I wanted to be sure that I could get my phone back to the standard O2 UK branded configuration in case I ever needed to send it in under warranty for repair. I hunted around on the internet and found a website with a link to a copy of the official O2 UK branded firmware which was a tarball called: I9100XWKDD_I9100XXKDH_I9100O2UKD1_HOME.TAR. Using odin I flashed my phone with this firmware and now my phone starts up with the O2 logo and everything seems back to normal, except when I connect it to Kies. I know for a fact that the O2 firmware I'm now on has been superseded by newer releases from O2, but when I connect to Kies, it says:
"Your device does not support software upgrading via kies. Current firmware version: I9100XWKDD/I9100O2UKD1/I9100XXKDH/I9100XWKDD"
I'm guessing that there is something else on my phone that I need to install/flash/change for Kies to start recognizing it as "Official". Does anyone know what this might be? What is it that Kies looks for on your phone to work out if it supports upgrading it or not? I am running the latest version of Kies.
I have attached a screenshot from my kies to show you what I'm talking about and a screenshot from my phone to show you software/firmware versions it is running.
Any help would be very much appreciated.
Cheers
tommyteacosy said:
Hi There,
I purchased my SGS2 outright from O2 UK and I'm on a pay monthly SIM-only plan with O2. The phone came loaded with the stock O2 UK firmware and whenever I connected it to Kies it would recognize the firmware and say that the current firmware is up to date, which was fine. Since then I have played around with rooting my phone, installing different mods and installing newer stock samsung firmwares to try out Android version 2.3.4. etc.
After all this playing around I wanted to be sure that I could get my phone back to the standard O2 UK branded configuration in case I ever needed to send it in under warranty for repair. I hunted around on the internet and found a website with a link to a copy of the official O2 UK branded firmware which was a tarball called: I9100XWKDD_I9100XXKDH_I9100O2UKD1_HOME.TAR. Using odin I flashed my phone with this firmware and now my phone starts up with the O2 logo and everything seems back to normal, except when I connect it to Kies. I know for a fact that the O2 firmware I'm now on has been superseded by newer releases from O2, but when I connect to Kies, it says:
"Your device does not support software upgrading via kies. Current firmware version: I9100XWKDD/I9100O2UKD1/I9100XXKDH/I9100XWKDD"
I'm guessing that there is something else on my phone that I need to install/flash/change for Kies to start recognizing it as "Official". Does anyone know what this might be? What is it that Kies looks for on your phone to work out if it supports upgrading it or not? I am running the latest version of Kies.
I have attached a screenshot from my kies to show you what I'm talking about and a screenshot from my phone to show you software/firmware versions it is running.
Any help would be very much appreciated.
Cheers
Click to expand...
Click to collapse
I have got two recommendations for you:
1. Have a look at http://fus.nanzen.se/ to get Check Fus Downloader and check what the latest official firmware for your phone and region is.
2. Got to Intratech's Carrier Branded Firmware thread here => http://forum.xda-developers.com/showthread.php?t=1113928 to get the carrier branded firmware you want/need to flash using Odin.
If you do not need a carrier branded firmware (Kies does not need a branded ROM on your phone), you can also check Intratech's Official Firmware thread here => http://forum.xda-developers.com/showthread.php?t=1075278 to get the latest official and un-branded firmware flashable via Odin.
See second post of his thread.
If you flash a stock ROM for your region, KIES should recognize it again.
Good luck !
It_ler said:
I have got two recommendations for you:
1. Have a look at http://fus.nanzen.se/ to get Check Fus Downloader and check what the latest official firmware for your phone and region is.
2. Got to Intratech's Carrier Branded Firmware thread here => http://forum.xda-developers.com/showthread.php?t=1113928 to get the carrier branded firmware you want/need to flash using Odin.
If you do not need a carrier branded firmware (Kies does not need a branded ROM on your phone), you can also check Intratech's Official Firmware thread here => http://forum.xda-developers.com/showthread.php?t=1075278 to get the latest official and un-branded firmware flashable via Odin.
See second post of his thread.
If you flash a stock ROM for your region, KIES should recognize it again.
Good luck !
Click to expand...
Click to collapse
You are a lifesaver! Thank you so much for your recommendations. I downloaded Check Fus Downloader which I was then able to use to download the latest O2 UK firmware, which, as it turns out, was only released yesterday and uses android 2.3.5. I then used odin to flash the new firmware and now when I connect to Kies it says I have the latest firmware installed.
Happy Days!! and Thanks again!
It_ler said:
I have got two recommendations for you:
1. Have a look at http://fus.nanzen.se/ to get Check Fus Downloader and check what the latest official firmware for your phone and region is.
2. Got to Intratech's Carrier Branded Firmware thread here => http://forum.xda-developers.com/showthread.php?t=1113928 to get the carrier branded firmware you want/need to flash using Odin.
If you do not need a carrier branded firmware (Kies does not need a branded ROM on your phone), you can also check Intratech's Official Firmware thread here => http://forum.xda-developers.com/showthread.php?t=1075278 to get the latest official and un-branded firmware flashable via Odin.
See second post of his thread.
If you flash a stock ROM for your region, KIES should recognize it again.
Good luck !
Click to expand...
Click to collapse
I have the same issue, when i upgraded the Stock firmware. When connect to Kies, message popup is "Your device does not support software upgrading via kies. Current firmware version: ...XXKH2"
I have reset to factory format my SG2 9100 (watch this video http://www.youtube.com/watch?v=FzDb6m7sQ7A&feature=related). After that when i connect it showing current and latest firmware..
I did exactly the same as the OP. I just flashed back to the latest carrier firmware and Kies still does not recognize it but I don't really care.
My question is: if I send it to warranty, is there any way they can see I have previously installed other official firmwares from Intratech's thread? I have never rooted it, only installed official firmwares.
Thanks.
nevrozel said:
I did exactly the same as the OP. I just flashed back to the latest carrier firmware and Kies still does not recognize it but I don't really care.
My question is: if I send it to warranty, is there any way they can see I have previously installed other official firmwares from Intratech's thread? I have never rooted it, only installed official firmwares.
Thanks.
Click to expand...
Click to collapse
Samsung honour official firmware for warranty does not matter if you have reflashed as long as the firmware is stock and custom rom counter is zero .
jje
tommyteacosy said:
You are a lifesaver! Thank you so much for your recommendations. I downloaded Check Fus Downloader which I was then able to use to download the latest O2 UK firmware, which, as it turns out, was only released yesterday and uses android 2.3.5. I then used odin to flash the new firmware and now when I connect to Kies it says I have the latest firmware installed.
Happy Days!! and Thanks again!
Click to expand...
Click to collapse
If you flashed the firmware using Odin, will you stay rooted after that? Or you will have to root it again? Sorry, I'm new to the Android world.
Thanks in advance,
antzlisoul said:
If you flashed the firmware using Odin, will you stay rooted after that? Or you will have to root it again? Sorry, I'm new to the Android world.
Thanks in advance,
Click to expand...
Click to collapse
You need to reroot as you have wiped the root kernel .
jje
antzlisoul said:
If you flashed the firmware using Odin, will you stay rooted after that? Or you will have to root it again? Sorry, I'm new to the Android world.
Thanks in advance,
Click to expand...
Click to collapse
Depends on what firmware. Some custom firmwares come rooted. Official stock firmwares do not.
Hello,
I upgraded my galaxy S2 to the SFR (France) ICS firmware I9100SFRLP7 by using CheckFusDownloader. It works but unfortunately my mobile is still not recognized by Kies. The message "your device does not support software upgrading via kies" is displayed on the screen.
Phone Info:
PDA: I9100BULPC
PHONE: I9100BULP6
CSC: I9100SFRLP7
Any idea ? If the CSC is not correct, what is the correct one and how to change it ?
Thanks for your help.
hi i am currently, according to Kies, using the latest version available to me on my Galaxy S2 (i9100) which is unlocked and i bought from the carphone warehouse.
The fimware I am using is 2.3.4 and my Kernel is 2.6.35.7-I9100XWKI4-CL575468
PDA:KI4 / PHONE:KI1 / CSC: KH1 (CPW)
however i know that this isn't the latest official release for the UK. I have researched numerous threads and i have tried changing me CSC using #*272*IMEI# however i am locked to CPW. So i then did more research and have found that i need to debrand my galaxy s2 from CPW to XEU to get the latest generic unlocked UK firmware. Can someone please tell me how to do this without using #*272*IMEI# because that doesn't work?
Your phone is unlocked but you want to unlock it ???
CPW is about the best CSC for the UK as it covers more networks ..
You will not get an update via KIES by changing your CSC ..
You can update and debrand by flashing a stock rom from the stock rom thread but you will may lose the KIES update path from then on.
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
yes but if i remain on CPW i will stay on android 2.3.4 where as if i switch to XEU i get the latest updates since it is the most generic UK firmware? and surely if i change my CSC then Kies will offer me an update to 2.3.6
bomskiboy said:
yes but if i remain on CPW i will stay on android 2.3.4 where as if i switch to XEU i get the latest updates since it is the most generic UK firmware? and surely if i change my CSC then Kies will offer me an update to 2.3.6
Click to expand...
Click to collapse
CSC has nothing to do with updates .
KIES reads the firmware and hardware and vendor codes from the phone .
Two paths to updates official via KIES you wait for vendor release
Or XDA via ODIN using latest stock Samsung firmware
Third possible is to use CheckFus to download firmware or find a way to change the codes on the phone .
jje
okay well howcome if i have unlocked handset i am still on 2.3.4 when there are people in the UK with 2.3.5? (sorry i am a noob)
bomskiboy said:
okay well howcome if i have unlocked handset i am still on 2.3.4 when there are people in the UK with 2.3.5? (sorry i am a noob)
Click to expand...
Click to collapse
You have a set of codes on your phone that determine its vendor and ID etc
Kies reads those codes
O2UK xxxx O2UK 11xxxx etc etc .
Then looks for that firmware on the server if it matches it downloads if it does not match it cannot download . So unless the vendor has updated then you have no download . Its the phone vendor who updates .
CheckFus and SpoofFW are two roous that may bypass the Kies checkup .
http://forum.xda-developers.com/showthread.php?t=1318683&highlight=spooffw
But this is XDA Developers and we dont use KIES .
jje
okay how do i know who my phone vendor is? i think it would be easier for me to just install cyanogenmod 7.1 however i am having trouble because when i followed all the instructions, i successfully rooted my phone installed ROM manager. however when i installed clockwork recovery and rebooted my phone it loaded android recovery mode 3e and says signature verification required. i gave up after a few attempts and thought it was due to my kernel? does the kernel version affect cyanogenmod? i.e. do newer versions of CM require a newer kernel?
You have Carphone Warehouse CSC hence no updates as most carriers tend to provide the updates.
Root with CF-ROOT and use customs or just flash a different firmware newer version with uk CSC with ODIN.
Sent from the valley of the shadows....
how do i CF-Root? and cant i just change my CSC so i get the newer updates if cpw doesn't release any?
No for reasons jje already said.
CF-ROOT is in original development and has concise instructions its very simple
There are lot's if stickys too take some timeout and read up as most information there will help you regarding learning about device.
Sent from the valley of the shadows....
okay then can you answer to questions for me? does a newer kernel affect the cyanogen mod and can you tell me how to install CM7.1 using CF root seeing as it didn't work last time due to signature error?
bomskiboy said:
okay then can you answer to questions for me? does a newer kernel affect the cyanogen mod
Do you mean can you put another kernel in CM a rom that already has a kernel
and can you tell me how to install CM7.1 using CF root seeing as it didn't work last time due to signature error
The instructions are on the first page .
http://forum.xda-developers.com/showthread.php?t=1297557&highlight=cm7
First time flashing CyanogenMod 7 to the Samsung Galaxy S II, or coming from another ROM?
Root the device and install ClockworkMod Recovery.
http://forum.xda-developers.com/showthread.php?t=1103399
Perform a NANDroid backup of your current ROM.
Copy rom to internal SD card .
Format the system, data & cache partitions of your device via mounts and storage recover
Perform a factory reset.
Flash CyanogenMod.
Flash CM a second time .
jje
Click to expand...
Click to collapse
first time and does whatever kernel you currently are on affect CM mod? or does CM install a new mod?
BTW 2.3.4 is the latest XEU firmware so changing to this won't make any difference to your firmware version number.
Sent from my GT-I9100 using xda premium
Hi,
I have a Telstra (Australia) Galaxy SII with the version information :
PDA: DVKF4
Phone: DVKF2
CSC: TELKF3
I found the thread which contains the links to a number of different firmwares
http://forum.xda-developers.com/showthread.php?t=1075278
There are so many version there, I don't know which is appropriate for my phone.
Telstra has not released an update and there seems to be no plans to do so. The phone is still at V2.3.3. Great network, crap customer service......
I would like flash the phone with a genric rom so I can receive updates.
Can anyone advise me on what ROM I should use for Australia?
Any help would be appreciated.
Regards
John
go here:
http://forum.xda-developers.com/showthread.php?t=1113928
Charlie C
Charlie,
Thanks for your reply.
I found the Telstra section and I am still confused.
This is what I found:
Australia
DVKF4: http://www.multiupload.com/UAZPBM0XAS
Firmware info: PDA DVKF4| PHONE DVKF2| CSC:TELKF3
DVKF4 Stock Kernel:http://www.multiupload.com/91ID4RZEMO
Password: [email protected]
What is the difference between the downloads?
I assume the first link is the ROM I currently have in my phone. What is the Stock Kernel?
Regards
John
PS: I need an idiot's guide.
pellajl said:
Charlie,
Thanks for your reply.
I found the Telstra section and I am still confused.
This is what I found:
Australia
DVKF4: http://www.multiupload.com/UAZPBM0XAS
Firmware info: PDA DVKF4| PHONE DVKF2| CSC:TELKF3
DVKF4 Stock Kernel:http://www.multiupload.com/91ID4RZEMO
Password: [email protected]
What is the difference between the downloads?
I assume the first link is the ROM I currently have in my phone. What is the Stock Kernel?
Regards
John
PS: I need an idiots guide.
Click to expand...
Click to collapse
The first link includes the rom (stock im guessing) along with the second link, which is just the kernel.
Are you trying to flash a custom rom, or just official, because the download link rom is probably no different than the one you currently have on your phone. (if you havent flashed any rom yet)
If you are trying to flash a custom rom, I dont think any custom rom allows you to get the official update. (might be wrong)
I see.....
What I am looking for is an official generic ROM that is suitable in Australia.
I used to have an SE X10 before it died and I had a generic ROM flashed from the DaVinci site.
This thread http://forum.xda-developers.com/showthread.php?t=1075278 has a truck load of official ROMs and many Frankenstein ROMs which I assume are the custom ROMs.
My understanding is that if you flash with a generic ROM, you will get official ROMs when they are released by Samsung and you don't have to wait for your doppy carrier to provide a their cutomised version.
Is this correct?
Yes. If you flash one of those official firmwares from either of Intra's threads, you should be able to receive OTA updates via Kies. You can also use a PC app called Checkfus (search for it on here) to get official updates normally available via Kies (if you can't get updates via Kies for some reason).
P.S - For future reference, questions go in Q&A
pellajl said:
I see.....
What I am looking for is an official generic ROM that is suitable in Australia.
I used to have an SE X10 before it died and I had a generic ROM flashed from the DaVinci site.
This thread http://forum.xda-developers.com/showthread.php?t=1075278 has a truck load of official ROMs and many Frankenstein ROMs which I assume are the custom ROMs.
My understanding is that if you flash with a generic ROM, you will get official ROMs when they are released by Samsung and you don't have to wait for your doppy carrier to provide a their cutomised version.
Is this correct?
Click to expand...
Click to collapse
Dont flash the Frankenstein firmware then:
+++++++[Frankenstein Firmwares]+++++++
These packages below are not official firmware packages, they are Frankenstein package created due to demand for Firmware with different CSC and modems and also leaked firmware packages. KIES will not recognise the firmware so you won't be able to update to new firmware using KIES unless you flash back to a firmware meant for your device first. Otherwise there will always be Odin to use for updates
Click to expand...
Click to collapse
Hi so I'm trying to get my galaxy s2 back on stock firmwares, I just changed to gingerbread XWKI4 but now it won't update via kies.
Does anyone know why that would happen? Or what the official unbranded UK version of ICS is?
1. wrong forum
2. select your csc and try again
Brad2607 said:
Hi so I'm trying to get my galaxy s2 back on stock firmwares, I just changed to gingerbread XWKI4 but now it won't update via kies.
Does anyone know why that would happen? Or what the official unbranded UK version of ICS is?
Click to expand...
Click to collapse
If you know which stock firmware you want to go back to then you can just download the firmware from Intratech's thread and use odin to flash it. All the instructions and downloads can be found on this thread, read it carefully ..
http://forum.xda-developers.com/showthread.php?t=1075278
If you want to flash official unbranded UK ICS release then use Faryaab's Thread and flash the I9100XWLP7 ROM using Odin, the ROM can be downloaded from the 2nd post. Again follow the insturctions in the first post carefully.
http://forum.xda-developers.com/showthread.php?t=1544487
If you flash the unbranded UK ICS rom mentioned above and, as long as your phone is also unbranded, then Kies should detect your phone's firmware again. It stopped detecting it because you changed to a ROM that was not intended for your phone.