Hello, I have purchased a demo unit HP Touchpad, I currently have the touchpad on the 'HP webOS Account' screen, where its asking me to login or create an account. I get an error message when i try to create a new one.
Please can somebody talk me through how to unlock this and get working like a new touchpad?
I have downloaded a file called chekz device tool, but cannot get it to load on CMD, I am very new to this CMD it may be something am typing in wrong but I have tried for hours with no success.
Please Help???
Thanks,
Matthew
There is an unlock bypass method here, but they all should be unlocked anyway. http://forum.xda-developers.com/showthread.php?t=1229254
Nburnes said:
There is an unlock bypass method here, but they all should be unlocked anyway. http://forum.xda-developers.com/showthread.php?t=1229254
Click to expand...
Click to collapse
No its not unlocked, this is what I cant understand. On the startup screen, I click on Register (newaccount) and then once I fill in the details it says an account cannot be created. Am really lost
Would you happen to have the demo unit video stored somewhere on the TouchPad?
Just download WebOS Doctor and do a factory settings. Since you`ve just bought it, don`t think it`s gonna be a big deal for u
Related
Has anyone gotten the following application running?
Omapclock and Omapclockplusv0.0.4.cab
When I install it I get the following error when the phone powers on.
Initilization Failed. Reason: Can't map I/O.
I also get the error when I attempt to launch Omap Consule.
Thoughts? Suggestions? I e-mailed the creator of the tool, hopoing he'll reply. If he does, I'll post the answer here.
JIM
I am having the same problem.
From what I've read on this and various other forums, this is due to the phone not being unlocked.
Unlocked and now OmapOverclocker works!
I downloaded and used this free tool to unlock my 3125. That application error has gone away and I'm running at 240Mhz with a noticable improvement in performance.
As usual, THANK YOU!
Everyone in this forum is always helpful!
JIM
Cool.
Where did you get the unlock tool? Is it a CID unlock, SIM unlock or both?
Ulocker Tool
I do not remember where I got it, forgot to bookmark it.
Here's the file in a .zip format.
JIM
Re: Ulocker Tool
jhrain said:
I do not remember where I got it, forgot to bookmark it.
Here's the file in a .zip format.
JIM
Click to expand...
Click to collapse
Here's my e-mail address if you have difficulty downloading this unlocker.
jamesrainey[@]sbcglobal.net
Hello,
the unclocker can be downloaded but is empty... Can you post it again ? thanks
I think this one will work. You must run it from your PC when the phone is connected to ActiveSync. You must change a few registry entries before you do this. Google "qtek 8500 application unlock" and you will find instructions.
(Forum didn't allow me to attach the file, don't know why, but download it using the link below)
http://download.yousendit.com/C266A378100E349F
anyone have this tool anymore?
http://wiki.spv-developers.com/HTC_Application_Unlock_Guide
This is the link to app unlock your 3125. Now my question is after you get the omp clock on your phone how do you get the settings to stay you can change it 240 and if you check back later the phone it will be back to were it was before you changed it.
http://wiki.spv-developers.com/HTC_Application_Unlock_Guide
This is the link to app unlock your 3125. Now my question is after you get the omp clock on your phone how do you get the settings to stay you can change it 240 and if you check back later the phone it will be back to were it was before you changed it.
Bump to the top
I did the app unlock, the regedits, and i got the omapclock to work. But like everyone else, I am having problems with the omapclockplus to keep the overclock after a suspension or turning off. Anyone have a detailed how to??? I have read and re read nearly every thread about this topic. I am coming from a wizard to this strtrek so smartphone is a bit different for me. thanks for the help.
Hi, i would also like to know how to keep the clock speed to stay overclocked after resume.......i've followed the instructions on this website as well as this website
http://www.nicque.com/PQz/OmapClockPlus.htm
but i still cant get it to overclock after resume......i did try the smartskey program and omapclock when i had my wizard but the smartkey program is not compatible for smartphones.......
Hey guys, just found this:
http://www.modaco.com/index.php?automodule=downloads&showfile=1640
Not sure if it'll work though as it's built for a Tornado.
I tried that program. It works, but there is limit to the OC speeds? Anyone know how to hack the program so that you can OC it further?
Antha Secure DEMO has locked my Mobile 6 Ameo!
--------------------------------------------------------------------------------
I really REALLY hope someone might be able to help me here.
I am rather upset at my stupidity.
I was looking for VPN software for PPC.....found this:
http://www.anthavpn.com/webmaker/portal/wmlink_490
But I managed to download the Antha Secure instead and istalled it without checking.
I will Never make same mistake....How I was so stupid (not enough coffee)
I reset my device expecting Cisco able VPN but I was presented with a lock screen (like windows lock ) asking for a password to access my device.
Below the password box is a note saying "password is: demo"
Password demo does not work I am crying.....I have locked my Device!
Unlock code is not my device unlock code
It wont let me make emergency calls or anything......
I am stuck looking at their splash screen...
I can connect via Active sync - I removed the program files relating to this but I cannot get it to stop starting up with my device....
In windows/startup I have:
btdwake
poulook
sddeamon
Anyone rescue me
PLEASE!!!
If you are able to connect with activesync. Can't you just flash your device with Windows Mobile 6 again? That should put you back to start.
Hope that helps
x75
did hard reset
Thanks for reply though......
yarod_g14 said:
Antha Secure DEMO has locked my Mobile 6 Ameo!
--------------------------------------------------------------------------------
I really REALLY hope someone might be able to help me here.
I am rather upset at my stupidity.
I was looking for VPN software for PPC.....found this:
http://www.anthavpn.com/webmaker/portal/wmlink_490
But I managed to download the Antha Secure instead and istalled it without checking.
I will Never make same mistake....How I was so stupid (not enough coffee)
I reset my device expecting Cisco able VPN but I was presented with a lock screen (like windows lock ) asking for a password to access my device.
Below the password box is a note saying "password is: demo"
Password demo does not work I am crying.....I have locked my Device!
Unlock code is not my device unlock code
It wont let me make emergency calls or anything......
I am stuck looking at their splash screen...
I can connect via Active sync - I removed the program files relating to this but I cannot get it to stop starting up with my device....
In windows/startup I have:
btdwake
poulook
sddeamon
Anyone rescue me
PLEASE!!!
Click to expand...
Click to collapse
Maybe someone has a better solution but here goes mine. Download and install Safe Mode for PocketPC. http://www.freewareppc.com/utilities/safemodeforpocketpc.shtml
Soft reset and try to go into safe mode to see if it'll allow you to uninstall. If you can get into the device, at the very least you may be able to edit your registry to disable this buggy software. Let us know how it goes.
It's weird that you can't uninstall the software via ActiveSync though.
Hard reset so sorted but....
Well, the app locks the device on startup. ASks for password (in box under says password : demo - this didnt work with soft keyboard hard keyboard upper and lower case etc...)
So Couldnt actually get to home page...
When I selected the item through active sync add and remove programs it let me click on remove but didnt remove it, just hung
This soft does actually suck. Anthasoft.com's web site needs some TLC but their support got straight onto my issue.
Shame I couldnt wait and reset really.
But SD card intact
Microdrive intact.
Copied program files and my docs out onto PC before Hard reset.
all ok really....jsut missions getting it back together.
yarod_g14 said:
Well, the app locks the device on startup. ASks for password (in box under says password : demo - this didnt work with soft keyboard hard keyboard upper and lower case etc...)
So Couldnt actually get to home page...
When I selected the item through active sync add and remove programs it let me click on remove but didnt remove it, just hung
This soft does actually suck. Anthasoft.com's web site needs some TLC but their support got straight onto my issue.
Shame I couldnt wait and reset really.
But SD card intact
Microdrive intact.
Copied program files and my docs out onto PC before Hard reset.
all ok really....jsut missions getting it back together.
Click to expand...
Click to collapse
Might want to have Safe Mode installed in case this happens to you again with other software. It's saved my butt several times already.
Safe Mode and WM6
Hi,
will Safe Mode 2.x work with WM6?
One the Monocube website they are only talking about WM5 ...
http://www.monocube.com/content/view/5/37/
Did anyone checked this out already?
___
Seq
Sequenzial said:
Hi,
will Safe Mode 2.x work with WM6?
One the Monocube website they are only talking about WM5 ...
http://www.monocube.com/content/view/5/37/
Did anyone checked this out already?
___
Seq
Click to expand...
Click to collapse
I have used it with WM6. Haven't had any problems yet.
Sequenzial said:
Hi,
will Safe Mode 2.x work with WM6?
One the Monocube website they are only talking about WM5 ...
http://www.monocube.com/content/view/5/37/
Did anyone checked this out already?
___
Seq
Click to expand...
Click to collapse
Yes, it works great on WM6. I've had no problems with it and it's even saved my butt once under WM6 already.
hello i got a Archos 5 internet media tablet at a good price from a pawnshop and when i got it home it was password protected the shop didnt know the pw so they sold it to me for cheap ... is there a trick i can do to get around this ? i went into recovery , downloaded the file from the main site, installed it and after the reboot it asks for the pw again !!! i tried 4 0's no luck plz help thank for your time
When in recovery menu - did you perform full format or just update firmware. You will need to full format to stand a remote chance
pretty sure i did gonna go thu it again
I believe you have to contact Archos to get a unlock code.
oh ok will call em in the am ty
well i called em and they said that i need to get the pw from the first owner i explained that i got it used from a pawnshop and they didnt care so i guessi'm stuck with it unless i can find a work around
Aameiel said:
well i called em and they said that i need to get the pw from the first owner i explained that i got it used from a pawnshop and they didnt care so i guessi'm stuck with it unless i can find a work around
Click to expand...
Click to collapse
Yes. I thought that may be a problem as how would they know that it wasn't stolen. I read someone else called in to get it unlocked, but he must have been able to prove that the device was his. He typed in a 3 digit number for a password and it requires 4 digits.. so then he couldn't unlock. Maybe it was registered.
I hope you find a solution.
Hello as I am new I know :[ this is my first time coming here and learning how to unlock a htc evo vx I have followed a page u guys have but I couldn't post in it because of my post level I was wondering I get so close to the end where it takes me to a website to get token but says I cannot log in and It copied this with notepad after I hit key on my keyboard it takes me out and my phone stays on the debug mode :[ can u guys help me trying to connect this phone to my tmobile sim [ALSO EVREYTIME IT TAKES ME TO THE SITE IT SAYS PLEASE LOG IN TO TAMES ME TO HTCDEV please log in }
OKAY new updates let me explain I figure out about the token I needed to make a account never read that but figured it out I got my token I put it in the token folder how it wanted I hit yes and I waited my phone rebooted I put my card in and still says its locked I try redoing it again and it stays in buggin mode I need to restart the phone again but its not working like the first time I tried it any ideas? do I need to factory reset the phone again?
951manny said:
Hello as I am new I know :[ this is my first time coming here and learning how to unlock a htc evo vx I have followed a page u guys have but I couldn't post in it because of my post level I was wondering I get so close to the end where it takes me to a website to get token but says I cannot log in and It copied this with notepad after I hit key on my keyboard it takes me out and my phone stays on the debug mode :[ can u guys help me trying to connect this phone to my tmobile sim [ALSO EVREYTIME IT TAKES ME TO THE SITE IT SAYS PLEASE LOG IN TO TAMES ME TO HTCDEV please log in }
OKAY new updates let me explain I figure out about the token I needed to make a account never read that but figured it out I got my token I put it in the token folder how it wanted I hit yes and I waited my phone rebooted I put my card in and still says its locked I try redoing it again and it stays in buggin mode I need to restart the phone again but its not working like the first time I tried it any ideas? do I need to factory reset the phone again?
Click to expand...
Click to collapse
AWWWW I feel like an idiot so I go into debug and I see my phone says unlocked I thought this would unlock my phone so I can use tmobile sims but this was to unlock it roms :[ I thought I wouldn't had to pay but I guess I will sorry guys if this was a waste of space on your forums but I learn something new :] thankx and hopefuly someday I can put some costums roms on my phone
I was just given a tf201 in excellent condition, running stock Jelly Bean 4.1.1.
I have it rooted; but, also want to unlock the bootloader, so I can put a better ROM on it.
Every video or forum thread I have found says to use the Asus UnLock Device App v6.
A few threads say that it now only supports ICS; and, that may be the root of my problem:
Despite following every recommended step for installation and unlock, the Unlock Device App will not recognize my Google Password (a requirement). I do not use 2-step authentication, I went into Google Settings, and changed "Allow less secure apps" to 'ON'. I even changed my password, deleted/recreated my account in the tablet. Despite all of this, the Unlock Device App will not accept my Google Password...and, won't unlock the Transformer Prime.
Does anyone know of an alternative method to unlock the tablet; or, or a 'fix' for my Google Password issue?
Thanks, in advance!
PJ Arts
Madmanmoose said:
I was just given a tf201 in excellent condition, running stock Jelly Bean 4.1.1.
I have it rooted; but, also want to unlock the bootloader, so I can put a better ROM on it.
Every video or forum thread I have found says to use the Asus UnLock Device App v6.
A few threads say that it now only supports ICS; and, that may be the root of my problem:
Despite following every recommended step for installation and unlock, the Unlock Device App will not recognize my Google Password (a requirement). I do not use 2-step authentication, I went into Google Settings, and changed "Allow less secure apps" to 'ON'. I even changed my password, deleted/recreated my account in the tablet. Despite all of this, the Unlock Device App will not accept my Google Password...and, won't unlock the Transformer Prime.
Does anyone know of an alternative method to unlock the tablet; or, or a 'fix' for my Google Password issue?
Thanks, in advance!
PJ Arts
Click to expand...
Click to collapse
EDIT: Everything I've read says the unlock tool is the only option. The serial number on the device apparently gets checked against a database in the Asus China servers, which unlocks encryption so the bootloader can be unlocked.
I had a similar experience when I unlocked my Prime last weekend. I can't remember exactly what I did to get it to work, but it finally did work for me after I tried different things. The device is on firmware 4.1.1 JB/ 10.4.2.18.... so it definitely does work on JellyBean.
I didn't have 2 step verification activated either, but if I recall I had the issue where Google was not allowing less secure apps. Since you allowed that.... I'm not sure why it's not completing the process for you. I think I had received some sort of notification on the Tablet after typing in my Google password... and I had to confirm the notification to allow the app to have full account access.... but I honestly can't remember. I do remember looking through all the troubleshooting tips here: ( https://support.google.com/accounts/answer/6010255?hl=en ) and here ( https://support.google.com/accounts/answer/6009563 ).
I also remember using ES File explorer to see if there were any leftover files from the unlocking attempt, and I remember seeing a text file named "Unlock" or something like that, which I believe the app had created. (I've got to head out the door to get to work in a moment, so don't have time to look for it again right now)... but see if you can find that file and delete it... then try wiping data and cache in the Manage App settings, reboot the phone, and try to run it again.
The process was a pain in the butt for me too, but it finally worked, so hopefully you can get it to work for you too.
Thanks! Was given a really simple solution at another forum: Factory Reset/DO NOT register any Google account/use the UnLock Device App v6.
Worked like a charm.
Madmanmoose said:
Thanks! Was given a really simple solution at another forum: Factory Reset/DO NOT register any Google account/use the UnLock Device App v6.
Worked like a charm.
Click to expand...
Click to collapse
Cool man. Good tip for everyone. I'm sure that will help a lot of people. Happy flashing!!
Madmanmoose said:
Thanks! Was given a really simple solution at another forum: Factory Reset/DO NOT register any Google account/use the UnLock Device App v6.
Worked like a charm.
Click to expand...
Click to collapse
You seriously rock for this one. They oughta include this info in the KatKiss ROM update doc for the TF201. Thanks! -- Chuck
Options for not Unlocked device
Hi,
I tried multiple times to unlock the bootloader in the last 2 years (unsuccessfully), then few days ago I contacted Asus and they replied to me that "The unlock tool has been discontinued since 2014", so no way to unlock.
What are my options now? No way to install new roms, but there is any known method for at least rooting the device (with the latest firmware)?
Thing is, that I really liked the transfomer (especially the keyboard) but it's always been too slow to browse the internet, and actually there is no replacement I can buy (asus make some similar products but are all windows based and most of them have a quite cheap look).
Thanks a lot for the help!
BitJockey82 said:
What are my options now? No way to install new roms, but there is any known method for at least rooting the device (with the latest firmware)?
Click to expand...
Click to collapse
I rooted with motochopper, so now I have root access. I installed and used fstrim, seems like there was a small performance improvement. Not sure if I have anything else I can do to speed it up with root but no custom rom.
Hi i used the unlock tool last night, and it was a pain, as it wouldn't accept my google password! I found a solution on here, after reading what seemed like have the board posts for the TF201. So basically what I did was -
1. Go to the tablet settings, and set a pin code as the unlock method.
2. In Google, set the less secure apps permission.
3. Load the unlock app again, and accept the warnings.
4. When it asks for verification, use the unlock code option.
5. Wait for it to do its thing, and Tablet will reboot.
6. Once finished, restart the Tablet, in top left hand corner during boot it will say this device is unlocked.
Hopefully this will help.
Regards Bill
Thanks Bill,
I tried again today, following your steps, but this didn't worked. My problem is that the unlocker just fails, it never prompted me for the google account password. It saves a file with the unlock date.
I think I need to try again with the factory reset (that I tried in the past actually, and didn't worked).
BitJockey82 said:
Thanks Bill,
I tried again today, following your steps, but this didn't worked. My problem is that the unlocker just fails, it never prompted me for the google account password. It saves a file with the unlock date.
I think I need to try again with the factory reset (that I tried in the past actually, and didn't worked).
Click to expand...
Click to collapse
Does anyone have a working download link for the unlock tool? It seems to no longer be available on ASUS's website.
---------- Post added at 04:04 AM ---------- Previous post was at 03:58 AM ----------
Desverger said:
Does anyone have a working download link for the unlock tool? It seems to no longer be available on ASUS's website.
Click to expand...
Click to collapse
Never mind, I found this thread: https://forum.xda-developers.com/tr...uide-tutorial-asus-transformer-prime-t3486237
Which points to this archive full of useful stuff, including the unlock too: https://drive.google.com/file/d/0B0wnQregW3ZgZ0o5X3Vidnp3MFU
Sorry for the spam. :silly:
winnerz said:
Hi i used the unlock tool last night, and it was a pain, as it wouldn't accept my google password! I found a solution on here, after reading what seemed like have the board posts for the TF201. So basically what I did was -
1. Go to the tablet settings, and set a pin code as the unlock method.
2. In Google, set the less secure apps permission.
3. Load the unlock app again, and accept the warnings.
4. When it asks for verification, use the unlock code option.
5. Wait for it to do its thing, and Tablet will reboot.
6. Once finished, restart the Tablet, in top left hand corner during boot it will say this device is unlocked.
Hopefully this will help.
Regards Bill
Click to expand...
Click to collapse
Just tried this tonight and it worked. No Google account activation but I did set a screen lock. I setup the wifi in the beginning setup screens. and Used the Unlocker from the Asus Tf201 Download
Installed unlocker and opened the program and asked for asus tf201 pin code. System accepted settings and rebooted.