I was wandaring if anybody new of any good car docks for the lumia. Normally i would just pop down town and buy some cheap one but for some reaosn Nokia put all the physical buttons down one side meaning anything that grips it will press something. The Other option are the stick on style but im concerned these will just get ducty and or leave a mark on the phone.
Im after one too. Must be one in the works surely.
Saw a video from Nokia showing how Drive works and he was using a very tidy holder that looks like it was design for the Lumia/N9.
Being that Nokia Drive is a decent selling point I'm sure an official holder is in the pipeline.
Fingers crossed
---------- Post added at 08:15 PM ---------- Previous post was at 08:14 PM ----------
http://youtu.be/b_u8qi2lRkQ looks nice
Brodit make one.
http://www.mobilefun.co.uk/brodit-passive-holder-with-tilt-swivel-nokia-n9-lumia-800-p33064.htm
Its nice. But not quite as nice as the one in the video
Sent from my Lumia 800 using Board Express
This? http://www.ebay.com/itm/Original-No...648871?pt=PDA_Accessories&hash=item5ae2886f67
AnyMal said:
This? http://www.ebay.com/itm/Original-No...648871?pt=PDA_Accessories&hash=item5ae2886f67
Click to expand...
Click to collapse
Problem with that is it'll press down the volume button. Lumia has all it's buttons (volume up/down, power and camera) down the right hand side.
Makes clamp style holders useless
genuine holder
http://europe.nokia.com/find-produc...holders/nokia-universal-holder-cr-123/gallery
http://www.amazon.co.uk/dp/B005WKEY...de=asn&creative=22206&creativeASIN=B005WKEY6O
how about this one Dan
found the one from the video I posted.
Looks like it would work a treat!! And £8.99 for an official cradle seems like a bargain!
http://www.amazon.co.uk/dp/B0045H42...de=asn&creative=22206&creativeASIN=B0045H42VC
Just ordered one, I'll post pics and details of how well it fits once I get it
Lumina said:
found the one from the video I posted.
Looks like it would work a treat!! And £8.99 for an official cradle seems like a bargain!
http://www.amazon.co.uk/dp/B0045H42...de=asn&creative=22206&creativeASIN=B0045H42VC
Just ordered one, I'll post pics and details of how well it fits once I get it
Click to expand...
Click to collapse
Has this arroved? I am really interested in this but i would like to know if it fits properly also does the holder come away from the stand so that it can be rigged to sit on a vent? Thanks to my large family i have to drive a bus so the dash goes on for ever making windows holders messy
Here you go;
http://www.flickr.com/photos/[email protected]/sets/72157628143440337/
Fits and holds it really well. It's a spring loaded clamp, so can be a bit of a fiddle getting it out again, but I don't think it's going to fall out any time soon.
Doesn't come with a clip for air vents, but it comes with a pad that you can stick to a surface then sucker it on to there.
The suckers about the strongest I've seen on a car kit, it's made from a slightly tacky rubber and it really grips on.
For £8.99 Im very happy
Doesn't come with a cable so you need one of them serperatly, I'm just using my HTC Trophys lead.
Lumina said:
Here you go;
http://www.flickr.com/photos/[email protected]/sets/72157628143440337/
Fits and holds it really well. It's a spring loaded clamp, so can be a bit of a fiddle getting it out again, but I don't think it's going to fall out any time soon.
Doesn't come with a clip for air vents, but it comes with a pad that you can stick to a surface then sucker it on to there.
The suckers about the strongest I've seen on a car kit, it's made from a slightly tacky rubber and it really grips on.
For £8.99 Im very happy
Doesn't come with a cable so you need one of them serperatly, I'm just using my HTC Trophys lead.
Click to expand...
Click to collapse
cheers that looks really good, just ordered mine.
lumpaywk said:
cheers that looks really good, just ordered mine.
Click to expand...
Click to collapse
Fine, I also ordered now the original NOKIA car holder
Thanks for the pictures, lumpaywk, very helpful!
I already bought this one but it pushes the buttons on the right side what I dont like
http://www.ebay.de/itm/310359455476
Lumina said:
Here you go;
*link here*
Fits and holds it really well. It's a spring loaded clamp, so can be a bit of a fiddle getting it out again, but I don't think it's going to fall out any time soon.
Doesn't come with a clip for air vents, but it comes with a pad that you can stick to a surface then sucker it on to there.
The suckers about the strongest I've seen on a car kit, it's made from a slightly tacky rubber and it really grips on.
For £8.99 Im very happy
Doesn't come with a cable so you need one of them serperatly, I'm just using my HTC Trophys lead.
Click to expand...
Click to collapse
Thanks for that - just persuaded me to buy one!
mickfarr said:
Brodit make one.
Click to expand...
Click to collapse
Although Brodit have mounts for the Nokia Lumia 800/N9, these are only made for using device in it's original case, and so I feel Brodit mount will still hide buttons.
Lumina said:
Problem with that is it'll press down the volume button. Lumia has all it's buttons (volume up/down, power and camera) down the right hand side.
Makes clamp style holders useless
Click to expand...
Click to collapse
The Brodit clamp style holder will not interfere with the buttons...
http://www.brodit.se/product.html?id=513297&pn=prod&brand=Nokia&model=Lumia 800
I currently have the active mount for the HTC HD2 and with a bit of glue I added the headphone connector cable into the holder so I could wire the audio output to the car stereo. I don't know brodit don't make their mounts include this. The Nokia device will be more difficult to modify as it requires extending the upper connector block.
Awesome find.. just bought one.. been looking for a holder for ages
I have a Brodit holder for my HD2 and loive it. I can't recommend it enough as it is a quality item.
I am using iGrip T5-1880, so far so good, and it is Made In Germany
Related
Works with many devices. Originally for the HTC Universal, but holds HTC Athena, Wizard, Typhoon and Polaris.
(We needed our first Accessory post)
raskell said:
Works with many devices. Originally for the HTC Universal, but holds HTC Athena, Wizard, Typhoon and Polaris.
(We needed our first Accessory post)
Click to expand...
Click to collapse
You are cruel
Abbsta said:
You are cruel
Click to expand...
Click to collapse
I agree thats pretty messed up. We are drooling looking at your TC while knowing that our Christmas will be a little less festive without ours.
I'm not Cruel, but HTC. . . .has wet our appetites
It's all in HTC's hands. . . .sorry about that, but thanks for following the thread. You will not be disappointed with this phone (when it arrives). I don't intend to be cruel, just trying to give a comprehensive overview of the device and in this thread, how it can be docked at your desk.
I had one of these for my old O2 XDA Orbit: http://www.mobilefun.co.uk/product/12706.htm
I can confirm that this DOES NOT fit the new HTC Touch Cruise. The bit behind the device is too curved which means that the TC has to lean forward and so it won't line up onto the USB plug which is angled backwards in the cradle. The positioning is OK left/right but the angle is badly wrong so it won't go in.
It's a shame because I liked this cradle, it was small, cheap and unobtrusive on the desk and I'd got quite addicted to just dropping the device into a cradle. I hope someone will post experiences if they find a similar device that does fit. The Universal Cradle that started this thread looks too big for me.
- Julian
cradle for Polaris?
Hi guys,
Anybody tried this one?
http://4ustuff.com/info.php?itno=2416
Looks nice...
JulianL said:
I had one of these for my old O2 XDA Orbit: http://www.mobilefun.co.uk/product/12706.htm
I can confirm that this DOES NOT fit the new HTC Touch Cruise. The bit behind the device is too curved which means that the TC has to lean forward and so it won't line up onto the USB plug which is angled backwards in the cradle. The positioning is OK left/right but the angle is badly wrong so it won't go in.
It's a shame because I liked this cradle, it was small, cheap and unobtrusive on the desk and I'd got quite addicted to just dropping the device into a cradle. I hope someone will post experiences if they find a similar device that does fit. The Universal Cradle that started this thread looks too big for me.
- Julian
Click to expand...
Click to collapse
I have the touch cruise and bought this cradle. The cruise fits fine in it. The one btsanev linked to looks nicer though
baimo said:
I have the touch cruise and bought this cradle. The cruise fits fine in it. The one btsanev linked to looks nicer though
Click to expand...
Click to collapse
Are you sure we're talking about the same cradle? I bought mine in December 2007. Maybe they've changed the design because we can't both be right and I'm sure that neither of us has any reason for posting wrong information on this forum.
To try and get to the bottom of this:
1) When did you buy your cradle?
2) Are you sure it is exactly this model?
3) What angle is the USB plug relative to the vertical? My slopes backwards by about 20 degrees. I think that if there was even 5 degrees less rake on the connector then my TC would fit.
Until/unless Baimo and I can get to the bottom of this then I really wouldn't recommend any TC owner buying the cradle I linked to unless you view it as sufficiently cheap to just take a risk that this might be down to batch/manufacturing tolerances.
- Julian
I have one of these, works fine:
http://gpsforless.co.uk/product_details.php?id=5967
rickgillyon said:
I have one of these, works fine:
http://gpsforless.co.uk/product_details.php?id=5967
Click to expand...
Click to collapse
Thanks for the info. That one is definitely different to mine. Mine doesn't have that flat recessed bit at the rear of the device and it looks as if mine has much more rounded corners in the receiving area at the front of the device (the bit where the USB plug lives) which is the big problem with mine because those rounded corners mean that my TC can't sit back in the cradle so it won't align with the USB connector.
Is your TC a comfortable fit into this cradle or is it a case of it just fits but it's a bit tight?
- Julian
JulianL said:
Is your TC a comfortable fit into this cradle or is it a case of it just fits but it's a bit tight?
Click to expand...
Click to collapse
Not at all tight, slides in really easily. You can tell it's not designed for the TC as it tilts maybe 1mm one way or the other (left to right) where the shape of the base doesn't exactly match the curve of the TC, but it's good enough.
My Brodit car holder for Artemis is fine too.
Docking Station
Will the polaris work in a docking station for the p3300.
they look the same
mike.hancox said:
Will the polaris work in a docking station for the p3300.
Click to expand...
Click to collapse
Did you read this thread before you posted to it?
Hello all
In the same way as JulianL, maybe I will try this: http://www.mobilefun.co.uk/product/4249.htm
Just for a nice desk...
And for the pro's:
http://www.cricel.com/jamepda/2462-station_accueil_pour_htc_p3300_artemis.html
and
http://www.cricel.com/jamepda/5922-station_accueil_pour_htc_p3300_artemis_avec_chargeur_secteur.html
or...: http://www.boxwave.com/products/desktopcradle/htc-universal-desktop-cradle_724.htm
So, I think we have to wait a little for newer special cruise cradle.
btsanev said:
Hi guys,
Anybody tried this one?
http://4ustuff.com/info.php?itno=2416
Looks nice...
Click to expand...
Click to collapse
This is not available yet. I have call the guy in Hong Kong/China but he sounds like that he is waiting for enough order before he starts to manufacture it. I wonder how many of us will be interested in having one? If there is enough interest, I have connection in HK and will be able to import it to UK.
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
nice find. please let us know how it works. i have a vzw tp2 as well and have been searching for a car holder. right now it sets on my passanger seat...
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
YodaJM said:
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
Click to expand...
Click to collapse
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Techitrucker said:
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Click to expand...
Click to collapse
Thanks for the response, very good reasons not to go with a giant squeeze cradle.
I've been looking at this mount http://www.arkon.com/phonemount.php
Curious if anyone else has used it with the TP2.
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
I have an old Treo 650 Pro-clip mount that works perfectly with the TP2. The phone slides in securely and comes out easily. Obviously no active connection but it works great. I put double sided tape in the back of the of the mount and it holds my Fuze perfectly as well.
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
MrGoodCat said:
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
Click to expand...
Click to collapse
Just came in the mail on Saturday. The cheap shipping took one week to the day. Quality of the cradle is very good. The clip at the top is actually spring loaded, not just plastic that bends back, like the Seidio holsters. It is removable if you won't need to use the cradle in landscape to make it easier to take in and out. The cut out at the bottom is definitely for the CDMA phones. It should work with the European versions also. THIS CRADLE WILL NOT WORK ON THE T-MOBILE VERSION AT ALL. It is a perfect fit for my Verizon phone. This is not a cradle you want if you need to use the keyboard while it is in. For me that is not and issue and it makes me uncomfortable having plastic wedged between my keyboard and screen anyways. Seems like it would be hard on the slider. The windshield mount is very nice. It has push button friction locks instead of screws for the joints and the rotation is spring loaded so its easy to rotate when needed one handed. The suction cup is very large and has a good positive locking mechanism. It is larger than the average suction cup so if you need a dash disk like I do, you will need the largest one you can find. Unfortunately it does not come with one. Since they are selling this so inexpensively, that probably a place they needed to cut their losses. The quality of the cradle is much higher than the price. The cradle does not use a standard mechanism to join it to the mount so you will either have to use the one it came with or go to the website and see if they have another kind of mounting solution. This is really the only limitation I can find. You will not be able to use it with your Proclip solution if you have one. Any more questions you have, just leave them in this forum.
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
treo...not! said:
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
Click to expand...
Click to collapse
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
cincy1020 said:
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
Click to expand...
Click to collapse
check automotive section
MrGoodCat said:
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
Click to expand...
Click to collapse
I had one for my Touch Pro and it was nice enough but it kind of made the gap between the keyboard and phone wider over time. If you absolutely have to have the keyboard open while driving its probably the best on on the market, though to me that keyboard open is just and invitation to disaster. Its hard enough to keep hands off the phone while closed They are not inexpensive by any means. Depending on how you need to configure it you can easily spend well over a $100 bucks. The powered cradle alone without a car specific mount is $60 which is competitive with other powered solutions, but the non powered ones at $40 bucks seem more than a little like highway robbery to me especially since you will still spend $30+ on the mounting solution for the cradle. Still, if you need that keyboard open its the only decent solution at this time. They have no powered option for Verizon yet, but the non powered one they have listed for the AT&T Tilt 2 will work on Verizon and Sprint. The phones are exactly the same shape as the AT&T phone except for the ports on the bottom. If you want a fitted cradle but don't need the keyboard to open while mounted, this is the posted cradle only real solution I've found, but its inexpensive and good quality.
Now if you want the best of both worlds, I was wrong about the Proclip mounts not working with the cradle. They make absolutely the best mounting solution hands down since there is no damage to the vehicle. They have cradle adapters on the site that will make it work and the price is not to bad.
http://www.proclipusa.com/?sectionp...egoryid=&p_year=&p_countryid=0&p_leftorright=
The suction cup on the cradle is 3.25 inches and this adapter is 3.5 inches so it should work.
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Nice find
RemE said:
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Click to expand...
Click to collapse
Nice find on the holster. Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. I find that taping a small vanity mirror to the dash works much better than those little round plastic disks since they where designed to stick to glass. If you have two phones and two holders like I do, the small rectangular one they sell in the automotive department at Walmart will hold both and its only 2 bucks and looks nice. I am not a fan of any kind of vent clip. The two worst enemies of electronics are heat and cold and something as heavy as a PDA is going to break the vent eventually. What I have done in the past is use something like this: http://theclip.com/store/The-Clip-Mount-p-16156.html with a holster or case.
I'm going to get the holster. Been looking for one that faces out like that.
I already have a clip in the car so won't need to take my mount with me when I get off the road.
Techitrucker said:
Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. .... If you have two phones and two holders like I do......
Click to expand...
Click to collapse
Driving a semi, using not one cell phone, but two???
You're probably a great driver. But I'm glad there are several states between you and I.
Techitrucker said:
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
Click to expand...
Click to collapse
tons of this stuff on ebay - pick a random one at 10-12 bucks with free shipping and if it doesnt work out too great its no big loss
Anyone know if this will work for the Tilt 2??
http://cgi.ebay.co.uk/ws/eBayISAPI....5&ssPageName=ADME:X:RTQ:GB:1123#ht_4013wt_939
Thats exactly what im looking for but thats the only thing that comes close. I want a sturdy vent mount that can rotate to landscape mode
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
NOT TRUE.
Just spoke with porclip.
The t-mobile version has not been developed and they do not expect it to be manufactured soon.
mpr_ger said:
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
Click to expand...
Click to collapse
I held off getting a car dock for my Captivate since i knew i was getting a new car (mounting would have been much different). now that things are settled with the SGS2, i finally got around to ordering my dock...
http://www.proclipusa.com/brodit-de...d-cigarette-lighter-adapter-512255-18750.aspx
great options from ProClip USA, but since my car's cig lighter is behind my right arm (07 S2000) the only option i had was to get the hard wired one (http://www.proclipusa.com/brodit-de...cord-for-fixed-installation-513255-18750.aspx). when i get this installed and wired up, i'll post pics. i'm going to love the set up, now i'll just need to buy a new BT (A2DP) enabled HU so i can eliminate all visible wires from my cabin...
pics to follow
this car dock is amazing... i just installed it and hard-wired it into my cigarette lighter for power, and it works perfectly. the phone fits in nice and snug, yet pulls out easily (but not too easily that it would ever just fly out on its own).
does the dock accept the phone with a case on .. or is it a pretty snug fit?
buy the adjustable one. have had mine for my last 3 smartphones.
http://www.proclipusa.com/brodit-device-holder/samsung-galaxy-s-ii-(at&t)/adjustable-holder-with-tilt-swivel-875214-18750.aspx
Coreym said:
does the dock accept the phone with a case on .. or is it a pretty snug fit?
Click to expand...
Click to collapse
not at all... it fits as snug as you can get...
pinoyxpryde said:
buy the adjustable one. have had mine for my last 3 smartphones.
http://www.proclipusa.com/brodit-device-holder/samsung-galaxy-s-ii-(at&t)/adjustable-holder-with-tilt-swivel-875214-18750.aspx
Click to expand...
Click to collapse
what he said...
The adjustable one fits great with a thin skin on the GS2. I"m also on my third phone with the same cradle
If you have multiple vehicles, or phones also consider the proclip quick release system.
[I'm new so no links for me. go to proclipusa & search for "move clip"]
makes daily mix & match a 10 second operation.
pinoyxpryde said:
buy the adjustable one. have had mine for my last 3 smartphones.
[
Click to expand...
Click to collapse
Lucke said:
this car dock is amazing... i just installed it and hard-wired it into my cigarette lighter for power, and it works perfectly. the phone fits in nice and snug, yet pulls out easily (but not too easily that it would ever just fly out on its own).
Click to expand...
Click to collapse
Do you keep the phone on it's side like that? Do you have issues during a turn? The website mentions issues with cell/gps signals with the phone horizontal. Do you see that? Are the 'arms' that hold the phone made of metal or plastic?
Same questions to the guy above who said he had the adjustable version. I was thinking, I'd like to do a micro-usb charging/AUX analog audio output cable (instructions are on this forum). I'd like to keep my case though. And this looks like the perfect solution. I might have to fab something up to put the phone on my dash above the stereo (for optimum viewing/GPS angle). Any thoughts on that idea? Thanks!
Jim
CNLiberal said:
Do you keep the phone on it's side like that? Do you have issues during a turn? The website mentions issues with cell/gps signals with the phone horizontal. Do you see that? Are the 'arms' that hold the phone made of metal or plastic?
Same questions to the guy above who said he had the adjustable version. I was thinking, I'd like to do a micro-usb charging/AUX analog audio output cable (instructions are on this forum). I'd like to keep my case though. And this looks like the perfect solution. I might have to fab something up to put the phone on my dash above the stereo (for optimum viewing/GPS angle). Any thoughts on that idea? Thanks!
Jim
Click to expand...
Click to collapse
no problems with GPS while the phone is is landscape mode. no issues while turning either as the phone fits very snugly in there. the sides that hold the phone in are thick plastic and have "channels" for where the phone slides in.
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Same
-adrian- said:
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Click to expand...
Click to collapse
I've been looking for the same thing, swivel capabilities is a must. Anyone find a good one?
Get a decent quality universal car mount (with the four prongs) and then just buy a cheap fixation for your Lumia. That way you can keep the mount when you eventually change phones... That's what I've been doing for the last few years...
I've got a telescopic Herbert Richter car mount which looks like it's the same as this one (http://www.ebay.com/itm/iGrip-Herbe...472900?pt=PDA_Accessories&hash=item48454f5744) and I've been very pleased with it. Unlike some of the cheaper ones I've had it has never lost suction and come unstuck. Most eBay sellers who have cheap Lumia 920 car mounts will sell the phone-specific part of their mounts separately for a couple of euros...
Well .. i dont like the universal ones to be honest because the ones i used never where as usfull as expected. will have a loook at the richter one.
Which car charger can you recommend. I am reading a few amazon.co.uk reviews and they are not to pleased with the ones offered
The one I use (and the one that looks like mine that I posted a link for) isn't one of those universal ones that can be adjusted to hold any size of phone... I don't like those ones either... The ones Im talking about just use a four prong system where you can attach phone specific "faceplates" like you can see here http://forum.xda-developers.com/showthread.php?t=683631 so it looks like it's made for the phone you use it with... Sorry, it's not easy to explain but you should be able to get an idea of what I'm talking about.
does your one come with a car charger already?
got different from belkin etc .. just looking for the power part of a car mount now.
will see if i find a universal holder later
hrmm, not sure if we are allowed to post links on here...
anyways, i bought this one http://www.amazon.co.uk/gp/product/B00AEO3U7W/ref=oh_details_o00_s00_i00
took a gamble as there was no reviews, current review is from myself.
Its pretty solid, I tend to always buy ones for the phone as I'm not a big fan of the all in one mounts, and the nokia one i got for my partners 710 is terrible, won't even hold my phone just slips out constantly. I've got a car charger from maplin to go with it that does do a 1000ma charge as my old charger didn't charge the phone enough to keep up with navigon.
Its as solid as some premium brand mounts i've bought in the past, as good as you can get with one suction cup. (imo) how long it lasts is another thing, but for the price I thought it was pretty neat, a friend borrowed it and immediatly ordered one too.
Its very sturdy and the easist phone mount i've used to slip in and out, only thing that did initially put me off is the fit isn't 100% secure, theres very slight movement, i don't think its even 1mm, thought it would rattle but seems fine in the car.
well i just ordered this for my charging:
http://www.amazon.co.uk/gp/product/B002C3AFHG/ref=oh_details_o00_s00_i00
hope you didnt have this one
and i will have a closer look at the amazon offer, thanks
stead, look at the second photo of the one you bought, see the four prongs? That means the front panel comes off so yours is one of the ones that I was talking about that can be used with any type of phone (as long as you get the right front panel holder piece)... :laugh:
NeoGreendawg said:
stead, look at the second photo of the one you bought, see the four prongs? That means the front panel comes off so yours is one of the ones that I was talking about that can be used with any type of phone (as long as you get the right front panel holder piece)... :laugh:
Click to expand...
Click to collapse
Ah, i thought you meant those univseral one size fits all ones that clamp onto the phone! everyphone holder i've bought has had the 4 prongs, but everytime I buy one I can never find just the phone bit on its own and just end up buying the whole thing again
This is the offending nokia one I bought, its terrible http://www.amazon.co.uk/gp/product/B003D1US46/ref=oh_details_o03_s00_i00
stead said:
Ah, i thought you meant those univseral one size fits all ones that clamp onto the phone! everyphone holder i've bought has had the 4 prongs, but everytime I buy one I can never find just the phone bit on its own and just end up buying the whole thing again
This is the offending nokia one I bought, its terrible http://www.amazon.co.uk/gp/product/B003D1US46/ref=oh_details_o03_s00_i00
Click to expand...
Click to collapse
I've very rarely seen them advertised on their own but if you ask, most eBay sellers who sell the dirt cheap car holders will sell you the phone specific attachment on it's own in my experience and usually for only a couple of euros including postage. Postage must be cheaper in Hong Kong than it is in France... :laugh:
Arkon Slim-Grip Floor Mount SM525-S
FWIW I have been using this model for about 4 years- first with my Tilt2 and now with the Lumia 920 (both without a case and with an Otterbox Defender case as the holder can expand). I had an older version for the Tilt2 which didn't allow for 180deg movement (you couldn't move the phone to landscape position while inside the holder) so when I got the 920 I was able to purchase just the Slim-Grip portion and keep the flexible pedestal part that I already had.
The 4 legs on the Slim-Grip are not permanent- they come in a little bag and you slide them into the body of the phone holder. The move left and right to allow for access to ports on the phone that may not be centered on the phone itself. It also comes with extra legs that are a different shape in case you need a different fitment for your phone (think they are shorter?). The bottom of the Slim-Grip is the part that moves- you push it down with the bottom of your phone and it expands enough to let you then push the top of the phone into the holder so the top legs support it. It isn't obvious from the pictures on Arkon's site at first but you will see a line running across the holder when you look at the pictures and that is where the movement occurs.
I am able to put my phone in the holder with one hand and, because the pedestal part is mounted to one of the passenger seat floor bolts, it's very stable. It's hard to move the pedestal to bend it to different shapes, which is a good thing, because it won't flop all over the place when driving. I can use the 920 without a case in it and with an Otterbox Defender, either way is fine. It allows easy access to the audio and power ports. My friends stick their phones in it too and it holds them just as well (iPhones, Galaxy S3's, Blackberry's etc......).The mount does not impede passenger comfort, however they may not be able to just flop their left leg against the center console because the mount would then be rubbing against the plastic and may leave marks, at least in my Subaru Legacy.
I have used this mount without any problems for close to 5 years now and everyone is jealous of it because it is so secure and convenient. I have no problems recommending it 100%. Good luck.
-adrian- said:
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Click to expand...
Click to collapse
Forget about universal car mounts. Have a look at the products from "Brodit", if available in your country. There's a special mount for almost every car und a special mount for almost every phone and tehere are active and passive holders. i bought a universal-mount and will never again, buy any universal crap. Now gonig downstairs, mounting my Brodit
Dave-Kay said:
Forget about universal car mounts. Have a look at the products from "Brodit", if available in your country. There's a special mount for almost every car und a special mount for almost every phone and tehere are active and passive holders. i bought a universal-mount and will never again, buy any universal crap. Now gonig downstairs, mounting my Brodit
Click to expand...
Click to collapse
You can now order a specific Brodit 920 - un-powered, cig-socket, and hardwired. Excellent mounts, especially the powered ones - amazing how nice it is to just slide the phone in and not worry about fiddling with charger cables...
BigKuri said:
You can now order a specific Brodit 920 - un-powered, cig-socket, and hardwired. Excellent mounts, especially the powered ones - amazing how nice it is to just slide the phone in and not worry about fiddling with charger cables...
Click to expand...
Click to collapse
Do these swivel 90degrees so as to use the phone in landscape as well as portrait?
Griffinx said:
Do these swivel 90degrees so as to use the phone in landscape as well as portrait?
Click to expand...
Click to collapse
They swivel 360 degrees and are very high quality. I've got one in my car that I've also used for my Note II (different holder of course though). It was well worth it IMO.
brodit always had the best ones..
but i read something with "screws" and that made me buy something different for the glas
What did you hear, I'm curious.
Sent from my 920
oh i just found car mounts to be screwed in the cockpit
-adrian- said:
oh i just found car mounts to be screwed in the cockpit
Click to expand...
Click to collapse
Oh OK I understand what you're saying now; I thought you were referring to an issue like the screws scratching the phone or something like that.
I didn't have to screw anything into my dash. I had a mount that clips onto the dash and a holder which is screwed into said mount. Very easy.
I have a nice dvd slot mount that grabs the sides of the phone with foam covered retractable arms, but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?
omniphil said:
I have a nice dvd slot mount that grabs the sides of the phone with foam covered retractable arms, but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?
Click to expand...
Click to collapse
I am using the infiniapps magnetic mount. It works great! Ofcourse, it depends on if your phone is naked, in a bumper, or in a case. I'm currently using the incipio feather case and have stuck the metal plates to the case itself (not my phone). and It holds really well. With the infiniapps mount, you'll only get one adhesive plate so I bought an additional one as well. See pictures for how I've attached the plates. I'll upload a picture of the phone mounted tomorrow.
infiniapps mount - i bought it on sale for $19.99
http://www.amazon.com/InfiniApps-Sm...TF8&qid=1381339071&sr=8-1&keywords=infiniapps
Additional metal plates
http://www.amazon.com/iMagnet-Rectangular-Metal-Adhesive-Mount/dp/B00BSAD7ZQ/ref=pd_sim_cps_1
Here are pics
Sent from my C6833 using xda app-developers app
So you have to put a plate on front and back of your case?
I don't use a case currently. I'm assuming I could just stick one of these pads to the back of the phone?
Are they really secure going over big bumps and stuff like that?
Yeah I put plates on the case because I didn't want to stick anything to the phone. It would obviously be lighter without a case, and thus hold better if you stuck it to the phone. It's been really secure over bumps and at high speeds. Held perfectly during a 7 hr drive last week.
I am using this one.
http://www.ebay.de/itm/281172219396?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648
It's the only customfit car holder for the Ultra I could find. When in the car I remove my Ultra from the Nillkin case and put it in the holder. I use it for navigation quite a lot and I hate it when the phone is loose in the car holder which is the case with most universal clamp style holders.
I have the InfiniApps Slyde CD Slot Mount also. Best phone mount ever. CD players are usually in the best location for viewing. I had cup, dash mounts, they were terrible. I used the sticky metal plate and attached it to the back of a case. Also magnetic attachment makes for quick removal of the phone when you want to check a message etc...
omniphil said:
I have a nice dvd slot mount that grabs the sides of the phone with foam covered retractable arms, but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?
Click to expand...
Click to collapse
Hi can you post some pics of it...???
This is the one I got. Worked pretty good until the Z Ultra..
http://www.mountek.com/dp/B004G1L52Q
Cool these look good. Just found another one which is cheaper than the others $12.99 + $2.99 delivery. Looks like it does the same thing and will also fit the Z Ultra (checked the dimensions). Link
Is there any risk that the CD slot ones will damage the CD player? Is the slot strong enough to handle the weight of the Xperia Z Ultra?
I've been using PuGoo sticky pads for a good year or two now to mount whatever smartphone I'm using. It's very handy.
http://www.amazon.com/gp/product/B00F68G58M/ref=olp_product_details?ie=UTF8&me=&seller=
You do need a good spot for it though, which luckily my xB has.
omniphil said:
...., but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?
Click to expand...
Click to collapse
I had same problem with those centered power/volume button and I found this -epay #251340401428-, look at seller's other items there are few kinds of mounting type for X ZU. I bought one and still waiting for the parcel so cannot review yet.
abuihsan said:
I had same problem with those centered power/volume button and I found this -epay #251340401428-, look at seller's other items there are few kinds of mounting type for X ZU. I bought one and still waiting for the parcel so cannot review yet.
Click to expand...
Click to collapse
I already have this car holder and it works fine. It keeps the phone firmly in place and it is easy to put in and take out.
cholepuree1 said:
I am using the infiniapps magnetic mount. It works great! Ofcourse, it depends on if your phone is naked, in a bumper, or in a case. I'm currently using the incipio feather case and have stuck the metal plates to the case itself (not my phone). and It holds really well. With the infiniapps mount, you'll only get one adhesive plate so I bought an additional one as well. See pictures for how I've attached the plates. I'll upload a picture of the phone mounted tomorrow.
infiniapps mount - i bought it on sale for $19.99
http://www.amazon.com/InfiniApps-Sm...TF8&qid=1381339071&sr=8-1&keywords=infiniapps
Additional metal plates
http://www.amazon.com/iMagnet-Rectangular-Metal-Adhesive-Mount/dp/B00BSAD7ZQ/ref=pd_sim_cps_1
Click to expand...
Click to collapse
Does it stay in place while driving and when hitting potholes or bumps?
It does hold very strong, I just got one of these. I hate cases on my phone but I put one on so I could attach the metal plate to the inside of the case. It has never fallen off on even the biggest bumps.
I am still deciding if I want to just stick the plate to the back of my phone... I wonder how easy it is to get the adhesive off the back glass if I ever wanted to remove it...
Yes is holds really well. Just had a 6hr drive this morning!
Edit: Here is a picture of how it looks while driving.
Sent from my C6833 using xda app-developers app
Just wanted to say that I just bought this:
Scosche stuckUP
Its early to tell but the quality feels solid compared to the many ebay cheapo one that end up breaking in no time.
The whole things just feel quality..and for the price it better! lol
Several ways to use it...I went with Windshield for now. Holds the phone very tightly and during the trip its very stable.
Also, I did not even have to remove the flip case I have which makes it seem a lot bulkier so I feel it will do great with either the CP12 or any of those battery/case combinations.
Happy to finally have my phone up there even if it blocks most of my view! LOL
I have come to the conclusion that a universal mount for a small tablet is the ideal car mount, so I have been looking at ebay for ones designed for the Nexus 7, Memopad 7 and Samsung Tab 7, and then checking that they can be adjusted small enough for the XZU.
this one in particular looks appropriate:
http://www.ebay.co.uk/itm/160672229905?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
it's a little bit more expensive than I'd expect for a simple product, but I've not seen a similar unit.
The one I bought above works excellent, it is for phones but depends on what you like.
I am very happy with the quality compared to all the crap I bought before lol
I have one of the Imagnet mounts in my F350 I used with another phone. I checked the Z Ultra and it sticks to it without needing the metal plate attached to the back of the phone. Right under the camera area inside the phone is enough metal that the magnet works fine. I have driven with it in that bouncy old truck and it does not come off or move around at all. The only bad thing is the metal is not centered so the phone only sits in portrait orientation. But it beats having to stick a metal plate to the back of the phone.
I like it because I am in and out a lot through the day and it is quick and easy to just toss the phone onto the magnet then just grab it off there when I need it. I have not tried it with a power cable attached but most likely it will just make it tilt over a bit depending on how much the power cable hangs down I guess. With the battery life of this phone it has not been something I have needed compared to the Mega 6.3 that would go dead much quicker streaming slacker radio over bluetooth than this beast of a phone. Most likely the charger cable would have to be supported in some way to keep it from making the phone lean to one side.