I'm attempting to teather to my galaxy prevail, and have had no luck so far. It's possible the chipset does not support it, but it's more possible my phone is failing some how. So I thought I would take a poll.
Sent from my SPH-M820-BST using XDA App
robertely said:
I'm attempting to teather to my galaxy prevail, and have had no luck so far. It's possible the chipset does not support it, but it's more possible my phone is failing some how. So I thought I would take a poll.
Sent from my SPH-M820-BST using XDA App
Click to expand...
Click to collapse
Have you tried using Open Garden WiFi? Using that to tether to my DInc. I tried using Wireless Android Tether but it would not connect (created ad-hoc). Switched to Open Garden and it created an infrastructure AP and now connects. Though sometimes I have to connect twice before it fully connects.
It tossed an error, but a productive looking one, ill see what I can do with it at home. On ze bus at the moment.
Sent from my SPH-M820-BST using XDA App
Try WiFi Tether with Setup-method "Softap for Samsung(Master)" from your phone. It works for me (I have Samsung Droid Charge from Verizon). Connected a few android devices to it. You may need to reboot the phone after changing that settings.
My phone is a Dinc running SkyRaider 4.3. The wireless tether that Ihtfp69 baked into the rom works fine for connecting to the NT. I don't remember which one it is though.
Sent from my Nook Tablet using Tapatalk
robertely said:
I'm attempting to teather to my galaxy prevail, and have had no luck so far. It's possible the chipset does not support it, but it's more possible my phone is failing some how. So I thought I would take a poll.
Sent from my SPH-M820-BST using XDA App
Click to expand...
Click to collapse
DroidX running GB and Wireless Tether 2.0.7 and my NT connects no problem. Not running encryption.
At this time I do not believe there are any available methods on tethering NT to any ad-hoc networks. I've tried multiple methods including all combinations of following:
* replacing wpa_supplicant w/ wpa_supplicant.adhocfix
* modifying wpa_supplicant.conf to reflect ap_scan=2 and added adhoc network section
* modifying tiwlan0.ini to enable wifiadhoc and added desired SSID and BSSType
The closest I came to connecting to any ad-hoc network is while running wpa_supplicant.adhocfix the (*) SSID actually showed up on the available network list and I can click on it to connect (and enter WEP key). However, NT seems to go into an infinite loop while trying to get DHCP and the yellow triangle showed up in the status bar indicating DHCP error.
Ideas anyone? The binary for wpa_supplicant.adhocfix seems to be valid however it is unable to access the system network settings to set IP's. I've also tried to chmod 4755 on the binary but that did not help as well.
Can someone please help on this issue. Thank you!!!
I was thinking of using the patch and applying it to the nt source. I am trying to figure out how to compile it from the bn site.
Sent from my BNTV250 using Tapatalk
My galaxy (tmobile vibrant) has a wireless access point option under its wireless setting. I can tether with my nook no problem
Is cm7 out for any other omap 4 phone? I am a noob regarding linux builds but will continue to try to build it.
Sent from my BNTV250 using Tapatalk
I tried this with 9 different version of wpa_supplicant which have been patched for ad-hoc. It seems that no one has fixed this for wpa_supplicant v0.6.10 with tiwlan0 and gingerbread. When looking at the output from adb logcat I could see various errors about tiwlan0 not working and other issues where the ssid was lost during the handshake.
But there is good news on this. I was able to find a working binary wpa_supplicant that does not connect to ad hoc but does work for wireless normally on the NT. It is the reference gingerbread build for the pandaboard (the reference board for omap4). The source is available and I am working on recompiling it with the patch for ad-hoc. For all of the other patches and roms out there I haven't been able to get this far so this looks promising.
Related
Hey everyone, just wanted to let you rooted android users out there know that you can tether to your touchpad pretty easily.
Go download the newest version of wifi tether 3.1beta5
http://code.google.com/p/android-wifi-tether/downloads/list
Install it
Run it
Menu-Settings
Change Device-Profile
Select Samsung Fascinate
Change Setup-Method
Select Softap for Samsung (Master)
Back to main screen
And now you are good to go. I have used this on my fascinate running the community rom, also read that someone had it running on their charge as well.
Have fun tethering.
Post back if this does or doesn't work for you, what device, and what rom/kernal you are running.
MOD EDIT (LP): There is another guide here by danalo1979
[HELP] Touchpad won't recognize my Android Hotspot
I just finished checking, and while my android tablet recognizes and connects to my android cellphone tethering, my hp touchpad doesnt even see it. Any help would be greatly appreciated.
I have no idea because I did not have a problem doing this on an evo
Sent from my PC36100 using XDA App
Get the beta tethered wifi app. The standard one from the market doesn't work with it. I think it can't connect to ad hoc routers our something.
http://code.google.com/p/android-wifi-tether/downloads/list
Sent from my SPH-D700 using XDA App
I cannot seem to connect Touchpad to any adhoc WiFi network. Really would like a fix for this one. iPads and iPhones connect to adhoc networks just fine.
I would manually enter the ssid, broadcast id, network id and ip address and forget dealing with dhcp if it's not working
maybe reboot? Mine works flawlessly on my android and touchpad
From what Im gathering, my HTC hero uses ad-hoc and the touchpad doesnt pick that up. Shame, but I have a feeling Im SOL.
Try turning off all the security settings etc...
Sent from my Nexus X 4G using xda premium
hcm228 said:
From what Im gathering, my HTC hero uses ad-hoc and the touchpad doesnt pick that up. Shame, but I have a feeling Im SOL.
Click to expand...
Click to collapse
wifi tether 3.1 beta 2. Select epic 4g under device profile in settings. Worked fine for me last night when I tried it. Took a little to configure and started with errors but I just restarted it and it was good.
Sent from my PG86100 using XDA Premium App
Some android phones can only broadcast wifi via adhoc mode which is incompatible with the touchpad. Its not a matter of what program you choose, if your phone can only do ad-hoc wifi then it wont work. Try using bluetooth (Wireless Tether 2.0.7)
sub2k1 said:
Some android phones can only broadcast wifi via adhoc mode which is incompatible with the touchpad. Its not a matter of what program you choose, if your phone can only do ad-hoc wifi then it wont work. Try using bluetooth (Wireless Tether 2.0.7)
Click to expand...
Click to collapse
Any idea what version to use for the photon? I tried this one and I just get errors. Thanks
Wifi tethering the touchpad works great using my HTC incredible (running CM7). Must be the ad-hoc issue others have mentioned.
i had issues getting my tp to connect to the wireless hotspot from my desire s.
as soon as i changed the security type from wpa2 to wpa it started working.
looktall said:
i had issues getting my tp to connect to the wireless hotspot from my desire s.
as soon as i changed the security type from wpa2 to wpa it started working.
Click to expand...
Click to collapse
The reason for that might be that they are two different standards of encryption, lollol, neither is backward/forward compatible with the other
Sent from my Samsung Galactic Superstar S II
didnt work for me.
running android darkstone HD2Froyo V3 off the mSD card on a HTC HD2.
any recommendations?
JupiterdroidXDA said:
The reason for that might be that they are two different standards of encryption, lollol, neither is backward/forward compatible with the other
Click to expand...
Click to collapse
yes i know that. i'm not a dickhead.
the TP is supposed to support WPA2, however it had issues with WPA2 on my desire s.
This does not work for me Either-it keeps saying 'Tethering but with Errors-see Log' and the log cannot load the Sofap part...
I have a feeling some phones can only broudcast WiFi in Ad-Hoc-Like my HTC HERO It may be time to say goodbye to it after all...I was actually hoping the TouchPad would mean i dont need a new phone as most of my stuff (good Flash Web Browser/Email/Games/Whatsapp/Facebook) would be sorted between the two devices....Oh well....
I believe the easiest way to tether from your rooted Android to the Touchpad is if you're running CM7, to use the built in wi-fi tether as it works flawlessly!
i dont see this option for fascinate
Select Softap for Samsung (Master)
i only see WEXT (ad-hoc)
I've been trying to get my Epic 4G Touch running the wifi tether app 3.1-beta6 (only version I am aware works for my phone) but the View can't see the wifi connection. Perhaps something to do with the way wifi tether is running? Ad-Hoc mode? Anybody know of a work around?
I am running Wifi Tether v3.1 beta 2 on my Droid Charge with no issues. I currently have mine set to the Samsung Fascinate for the device. You could maybe try changing the device to see if that does anything. I know I was having issues connecting one day and I just had to uninstall and reinstall the app and it started working fine again.
Which type of wifi connection your phone presents is device dependent. Some can do infrastructure which will work, others can only do ad-hoc , which the Flyer and most android devices will not see without a modified wifi supplicant file. If your phone tether cannot be seen on your Flyer you need to install the wifi supplicant mentioned in other answers in the forum, do a search for supplicant . That is the only way to fix this, and you must be rooted.
I use Wireless Tether app on my rooted Droid X and the view sees it just fine. Connects without any issues.
Hekdog said:
I am running Wifi Tether v3.1 beta 2 on my Droid Charge with no issues. I currently have mine set to the Samsung Fascinate for the device. You could maybe try changing the device to see if that does anything. I know I was having issues connecting one day and I just had to uninstall and reinstall the app and it started working fine again.
Click to expand...
Click to collapse
+1 Me too was using it this morning.
I run WIFI Tether v3.1-beta7 on my EVO 3D with no issues at all, View connects without hesitation. There are some settings that need to be set, though I don't know if this applies to all devices. I had to enable MSS clamping and Routing fix.
Here you go man. READ IT CAREFULLY!
http://forum.xda-developers.com/showthread.php?t=1437616
Sent from my Re-ZiZzLe Using Unreleased Ish =)
Try this.....
WiFi Ad Hoc enabler
https://market.android.com/details?id=nl.arendmedia.wifiadhocenabler
DigitalMD said:
Which type of wifi connection your phone presents is device dependent. Some can do infrastructure which will work, others can only do ad-hoc , which the Flyer and most android devices will not see without a modified wifi supplicant file. If your phone tether cannot be seen on your Flyer you need to install the wifi supplicant mentioned in other answers in the forum, do a search for supplicant . That is the only way to fix this, and you must be rooted.
Click to expand...
Click to collapse
I'm quoting DigitalMD because it appears this information may need to be repeated. I'm fairly certain that most Samsung devices are limited to ad-hoc only and that makes all the difference.
I'm downloading the wifi ad hoc enabler now to try this out...
I have a rooted Nexus S 4g on ICS- and wifitether works fine for my ipad2... but the HTC View doesn't even see the signal. Is this a carrier issue with the View, an HTC specific thing? I'm surprised the iPad had no issue as I've had plenty of public wifi connection issues...
Just trying to understanding the issues at play better here.
E.T.Heil said:
I run WIFI Tether v3.1-beta7 on my EVO 3D with no issues at all, View connects without hesitation. There are some settings that need to be set, though I don't know if this applies to all devices. I had to enable MSS clamping and Routing fix.
Click to expand...
Click to collapse
So I installed the latest 3.1-beta 11 to my Nexus S4g to try this before I go to other lengths to get the view to see it... but I don't see a MSS clamping options- only routing fix. I'm also trying device profile set to Evo 4g since that's what you had... still nothing...
Does it have anything to do with being on ICS on my Nexus? If you're doing adhoc from your evo (assuming...) why would the view not see ad hoc in my case?
WiFi adhoc enabler
Sent from my PG41200 using xda premium
johnson9203 said:
WiFi adhoc enabler
Sent from my PG41200 using xda premium
Click to expand...
Click to collapse
Right, but to do that, i need the View to be rooted correct? The point i was trying to make was it seemed like some people got this to work without needing to do that...unless i misunderstood...
EDIT: The following worked for me- Fox Fi on the phone, "PDA NET for Tablet" application for the View. activate both... No settings to be changed, nothing needs root permission.
nexus S4g phone with ICS rooted codename ROM and stock HC HTCView. Tethered great.
I used wireless tether without any problem on my old droid X, but now I'm having connection issues. My Asus transformer can see my Rezound just fine and connect, but my in dashoard Galaxy Tab doesn't see it at all.
I've tried the current beta of Wireless Tether, 2.0.7, Barnacle, and Open Garden, all with the same results.
We need to nail down what specific settings those successfully tethering are using.
Please list the following.
1. What app you are using.
2. What settings you are using (device presets, clamping, ect.).
3. What you are successful in tethering wirelessly to.
I'm going to run a few more tests, and post mine.
I don't mean to ask a dumb question but these apps just allow you to use your phones 4g on a laptop, etc. ? Are they free if you have unlimited data?
Why aren't people using Mobile hotspot to tether or am I getting confused?
To use the mobile hot spot you have to pay for it
sent from my newly unlocked Rezound
pwned3 said:
To use the mobile hot spot you have to pay for it
sent from my newly unlocked Rezound
Click to expand...
Click to collapse
Gotcha. What tether apps are people using for free? What seems to be working.
Wireless tether 2.07 kinda works. I have to run it open and it only broadcasts in ad-hoc mode
sent from my newly unlocked Rezound
pwned3 said:
Wireless tether 2.07 kinda works. I have to run it open and it only broadcasts in ad-hoc mode
sent from my newly unlocked Rezound
Click to expand...
Click to collapse
Same here... 2.0.7 works fine in ad hoc mode....
Sent from my ADR6425LVW using Tapatalk
Oprah's Children!
I'm using this one http://code.google.com/p/android-wifi-tether/downloads/detail?name=wifi_tether_v3_1-pre113.apk&can=2&q= and I have "Routing Fix" checked under settings. Works good for me (CleanROM 1.1 and Ziggy's Kernel).
Thanks for the post. I really need to know this too. I've tried everything but still a no go.
According to wiki ad hoc needs the same channels to work. For the people that do have it working what channels are you using in ad hoc mode.
Definition
To set up an ad-hoc wireless network, each wireless adapter must be configured for ad-hoc mode versus the alternative infrastructure mode. In addition, all wireless adapters on the ad-hoc network must use the same SSID and the same channel number.
from my newly unlocked Rezound
The problem is what devices you try to use to connect to your phone's mobile connection. I tried connecting with my Asus laptop (Windows 7) and it wouldn't connect correctly. I tried connecting with my gf's windows xp laptop and it works perfectly fine!
If you have questions about wireless tethering, please go do a bit of searching and reading, there are hundreds if threads that describe what it is.
This is a thread so we can get it working right.
Sent from my HTC Rezound using Tapatalk. Forgive autocorrect.
I fought for days over this before this release and from my trial and endless errors Ive come to realize (very very long story short) for the time being the best work through is using "OpenGarden" from the market. Don't change any settings. Just have an open connection and use access control. Like I said. Long story short, the issue lies within encryption. Leave it open and use access control. Hope this helps.
Sent from my MikRoms Beast of a Device using xda premium
dopediculous said:
I fought for days over this before this release and from my trial and endless errors Ive come to realize (very very long story short) for the time being the best work through is using "OpenGarden" from the market. Don't change any settings. Just have an open connection and use access control. Like I said. Long story short, the issue lies within encryption. Leave it open and use access control. Hope this helps.
Click to expand...
Click to collapse
+1. Its the only way I got it to work with my device so far.
So what paid/free apps are currently working?
Is anyone tethering a Touchpad running CM7 successfully? or an iPad? Currently posting for hotspot, but might cancel if I can still successfully tether those two over Adhoc. I can't get the Touchpad to work using wifi tether yet and don't have an iPad right now.
vudu said:
Is anyone tethering a Touchpad running CM7 successfully? or an iPad? Currently posting for hotspot, but might cancel if I can still successfully tether those two over Adhoc. I can't get the Touchpad to work using wifi tether yet and don't have an iPad right now.
Click to expand...
Click to collapse
I've successfully tethered my IPad2 to my Rezound with Wireless Tether 2.0.7.
I also tether my Ipad2 without any problems. I'm using Open Garden.
Does anyone know any apps that creates a Wifi AP? I am not talking about an Adhoc network that all apps I have used create, I want it to work like native tethering.
I am asking because I am using polish blood preRC, and I really want to use it full time, the only thing is native tethers do not work and all apps create an Adhoc network.
Normally this isn't a problem, however I wish to use my PS3 over my phone's 3G connection, this is where the problem comes in, the PS3 does not see Adhoc networks so most, if not all tether apps will not work.
I have tried to use connectify while I have a usb tether connected however the PS3 cannot connect to the internet, I also would prefer to avoid using my laptop as an AP.
So anyone know a decent Wifi tether app that will create an AP like native tethering, not an Adhoc network
Are you sure that PS3 cannot connect to Ad hoc networks?
Here is an article about it http://www.ehow.com/how_6808376_can-connect-ad-hoc-network_.html
and it says PS3 can connect to Ad hoc networks.
Check if you configured everything properly.
Also Wireless tether app supports AP mode but only on certain handsets (HTC Evo 3D for example). It looks like it doesn't support our device.
Mine has never seen an adhoc network from my phone, guess I'll check it tonight when I can get on it.
Sent from my LG-GT540 using XDA
Check wifi channels, anything between 1-11 channel will work.
delsus said:
Does anyone know any apps that creates a Wifi AP? I am not talking about an Adhoc network that all apps I have used create, I want it to work like native tethering.
I am asking because I am using polish blood preRC, and I really want to use it full time, the only thing is native tethers do not work and all apps create an Adhoc network.
Normally this isn't a problem, however I wish to use my PS3 over my phone's 3G connection, this is where the problem comes in, the PS3 does not see Adhoc networks so most, if not all tether apps will not work.
I have tried to use connectify while I have a usb tether connected however the PS3 cannot connect to the internet, I also would prefer to avoid using my laptop as an AP.
So anyone know a decent Wifi tether app that will create an AP like native tethering, not an Adhoc network
Click to expand...
Click to collapse
Don't use this ICS. It's still in very early stage of developement. It's only for money.. If you really need a ICS on your Swift, then try AOKP 4.0.3. by DevSwift. Probably an update will come very soon. I was using it on my swift for 1-2 weeks, and I was happy with it. Now I changed the whole phone.
Maczuga said:
Don't use this ICS. It's still in very early stage of developement. It's only for money.. If you really need a ICS on your Swift, then try AOKP 4.0.3. by DevSwift. Probably an update will come very soon. I was using it on my swift for 1-2 weeks, and I was happy with it. Now I changed the whole phone.
Click to expand...
Click to collapse
It's wrong to say its for money.....all he does is a dedicated ftp server for donators....and a bit delayed public release.
Sent from my GT540 using xda premium
Back on topic, ps3 definitely will not see an adhoc network, just tried and when I scanned it didn't pick it up, when I entered my ssid manually it said it could not find it.
Any suggestions are appreciated.
Sent from my LG GT540 Swift using XDA
delsus said:
Back on topic, ps3 definitely will not see an adhoc network, just tried and when I scanned it didn't pick it up, when I entered my ssid manually it said it could not find it.
Any suggestions are appreciated.
Sent from my LG GT540 Swift using XDA
Click to expand...
Click to collapse
Sorry for the mislead, PS3 doesn't work with ad hoc networks.
But here is a possible solution:
1)Download latest WiFi tether beta http://code.google.com/p/android-wifi-tether/downloads/detail?name=wifi_tether_v3_1-beta11.apk
2)Open it and then go to Settings
3)Change Device-Profile to Google NexusOne
4)Change Setup-Method to Netd (master)
5)Start tethering and that's it
Note: I haven't tested this on Mike's CM9 but it did work on CM7, so try it, and tell us if it works.
Just to warn you there is probability to get kernel panics with this settings.
EDIT: I have tested this on Mike's CM9 and can't get it to work. Simply wait till Mike fixes WiFi tethering, or flash CM7 or some other ROM.
You can try a couple of options...
1. Hosted Network Starter
Free: Simple hostpot on your pc with non configurable DHCP
www.nirsoft.net/utils/wifi_hotspot_starter.html
2. WiFi Tether Router
Paid: Android app for rooted phones with full featured DHCP, VPN, etc
https://play.google.com/store/apps/details?id=net.snclab.wifitetherrouter
Pick your poison
Hi All - coming to the LGOG from the SG Note which had no problems stock rooted - wifi tether working - just changed profile to I think nexus or something can't remember.
Has anyone consistently been able to get hotspot to enable on the stock ROM? what are the settings you are using in wifi tether? Assuming that is how you were able to get it to run. I am rooted on Jellybean - i have tried what google suggested and forum search suggested with no joy.
Tried - device profile SG3, generic ICS / JB (lan0)
It launches but no devices see it broadcasting? HELP!
Need this feature - want to stay with stock ROM if possible?
Thanks
MB
Can't say regarding the stock Rom, but wifi tether works well on RootBox.
Sent from my Optimus G using xda premium
Thanks - was hoping to stay stock but will have to give it a shot on custom I guess.
Sent from my LG-E970 using xda premium
Works with stock as well. Use netd-ndc (master) and you should see your Wi-Fi ssid available. Choose an alternate lan if you can see the net but not get a connection. Search these forums, there is a little more detail posted.
Sent from my LG-E970 using xda app-developers app
jdock said:
Works with stock as well. Use netd-ndc (master) and you should see your Wi-Fi ssid available. Choose an alternate lan if you can see the net but not get a connection. Search these forums, there is a little more detail posted.
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Jdock - did you change the device?
Ok - tried that and it did get me broadcasting but when I tried loggin into the device on my laptop it BSOD'd my laptop (tried it 3x and got same result) on Generic ICS/ JB lan0 and lan1 would not broadcast? I did search before and came up with no confirmed working settings? Any thoughts or can anyone sticky this or add working confirmed WIFI tether app settings that work on rooted unlocked stock?
Do you pay monthly for tethering service?
I tried tethering on my Samsung Infuse a while back and got a notice saying the service would be added to my bill if I did it again.
Is it undetectable if you are rooted or running a different ROM
Sent from my LG-E970 using xda premium
hollywood528 said:
Do you pay monthly for tethering service?
I tried tethering on my Samsung Infuse a while back and got a notice saying the service would be added to my bill if I did it again.
Is it undetectable if you are rooted or running a different ROM
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
I used wireless tether on a SG note and was not charged, didn't get any notifications either and it was a stock ROM rooted. I didn't use it that heavily though in terms of data downloaded mostly just syncing laptop for work.
killerb69 said:
Jdock - did you change the device?
Click to expand...
Click to collapse
Yes, didn't mention it because it was what you said (Generic ics/jb wlan0).
Did you try a different lan selection? I don't know what about it would make your laptop crash - sounds like an issue with your laptop that is incompatible with something in the AP settings.
You might need to try the netd max client cmd option too.
I also have a method (no sexy app, just a few commands I put into a script) that lets me run a socks proxy on my phone while my phone is a regular wifi client on my network (just brings up wifi without disabling data), and I can point my pc's web browser at it, thus usable even with wired pc's on my network. You can go a step further and apply the iptables rules the way wifi tether does, point your default gateway at it, and be tethered too.
jdock said:
Yes, didn't mention it because it was what you said (Generic ics/jb wlan0).
Did you try a different lan selection? I don't know what about it would make your laptop crash - sounds like an issue with your laptop that is incompatible with something in the AP settings.
You might need to try the netd max client cmd option too.
I also have a method (no sexy app, just a few commands I put into a script) that lets me run a socks proxy on my phone while my phone is a regular wifi client on my network (just brings up wifi without disabling data), and I can point my pc's web browser at it, thus usable even with wired pc's on my network. You can go a step further and apply the iptables rules the way wifi tether does, point your default gateway at it, and be tethered too.
Click to expand...
Click to collapse
OK - SOLUTION!!!!
the centrino driver on my Laptop gets a BSOD when connecting to the wifi hotspot with this phone and nexus 4 i guess- it is an identified issue on the Intel wireless community some people installed older drivers for their chipset to get it working, but mine does not have older drivers it is an ASUS UX31a (love this ultrabook) - final solution was to disable N mode on the advanced tab of the wireless chipset. Connects now no problem and stays connected.
my work laptop OLD intel chipset has no problem and hooked right up to the tether
Settings:
Wireless tether
Device profile - (Generic ics/jb wlan0)
Device Set-up method - Netd-NDC (master)
Lan- 192.168.1.0/24 (thanks Jdoc i did change this was defaulted to 192.168.2.0/24)
Hope if anyone else is in a quandry on this it helped - thanks for the support!
Cool - do you get the data display on the wifi tether screen (amount transferred and speed)? I had this but it seems like the JB update made it go away - maybe their method of collecting the data is incompatible with JB or maybe something else got trashed in the update.
Thanks for posting your solution.
killerb69 said:
OK - SOLUTION!!!!
the centrino driver on my Laptop gets a BSOD when connecting to the wifi hotspot with this phone and nexus 4 i guess- it is an identified issue on the Intel wireless community some people installed older drivers for their chipset to get it working, but mine does not have older drivers it is an ASUS UX31a (love this ultrabook) - final solution was to disable N mode on the advanced tab of the wireless chipset. Connects now no problem and stays connected.
my work laptop OLD intel chipset has no problem and hooked right up to the tether
Settings:
Wireless tether
Device profile - (Generic ics/jb wlan0)
Device Set-up method - Netd-NDC (master)
Lan- 192.168.1.0/24 (thanks Jdoc i did change this was defaulted to 192.168.2.0/24)
Hope if anyone else is in a quandry on this it helped - thanks for the support!
Click to expand...
Click to collapse
This worked, thanks! I flashed SlickJB and the flashable stock JB and wifi tething wasn't working. Now, it is, thanks again.
I don't get the data display either jdock - as long as I can use I am good usually just need it for spot use but it is really handy sometimes!! Hope all this helped others
Sent from my LG-E970 using xda premium
wifi-tether disabled wifi until next reboot
snacsnoc said:
This worked, thanks! I flashed SlickJB and the flashable stock JB and wifi tething wasn't working. Now, it is, thanks again.
Click to expand...
Click to collapse
I'm stock/rooted at&t JB and using these settings:
Device profile - (Generic ics/jb wlan0)
Device Set-up method - Netd-NDC (master)
and while tethering works fine, I cannot get wifi back after stopping the tether and closing wifi-tether. I can't get wifi back until I reboot the phone. I've tried a number of device profiles (generic, generic ics/jb (both of them), SGSIII) and they all behave the same way. I didn't have this trouble with the stock ICS, this just started with the at&t jb update.
anyone get this working?
razholio said:
I'm stock/rooted at&t JB and using these settings:
Device profile - (Generic ics/jb wlan0)
Device Set-up method - Netd-NDC (master)
and while tethering works fine, I cannot get wifi back after stopping the tether and closing wifi-tether. I can't get wifi back until I reboot the phone. I've tried a number of device profiles (generic, generic ics/jb (both of them), SGSIII) and they all behave the same way. I didn't have this trouble with the stock ICS, this just started with the at&t jb update.
anyone get this working?
Click to expand...
Click to collapse
That's what I had to do too. Wifi wouldn't turn back on unless I rebooted. I'm not sure how to get it working, considering I'm on Rootbox now.