I apologize in advance if this subject is posted elsewhere. Please kindly point me to the thread...
I'm a noob and just bought a viewsonic G-tablet.
I've been searching xda for a day now, and I cannot find a how-to guide on how to make the "adhoc wifi hack" to work on the stock ROM.
I've found this:
http://forum.xda-developers.com/showthread.php?t=754961
But I can't find a definitive answer on how to "flash this in recovery mode" specifically on the G-tab.
I'm assuming to proceed to installing ClockworkMod from (http://forum.xda-developers.com/showthread.php?t=865245)
and then flashing the "adhoc-signed zip file" from there.
I realize ClockworkMod is used to flash ROM's, so I'm wondering if this "adhoc patch" file can be flashed the same way without affecting the stock ROM.
Please let me know if this is the correct path to go down.
Thanks for your help in advance.
what is that
There is an easier solution. Search for the stock enhancement pack in the development forum. You will have to flash the file in CWM or with standard recovery. Instructions are in the post.
Enjoy your AdHoc goodnes.
Okay, I answered my own question, but now have more problems to deal with.
I installed the "adhoc signed zipped" file with CWM. I created a new folder in the gtab root and put the "adhoc signed zipped" file in there. In CWM's menu, there is a selection to install zip/flash from an internal folder.
okay, got adhoc to work. When scanning for networks, the adhoc networks show up with the * as expected. I connected successfully to my wm6.1 phone with wmwifirouter.
However, the gtab cannot load up websites. I do see spurts of data on the phone being passed, but it seems to be spurts and it stops. Browser on gtab say check connection.
So I'm thinking that this has something to do with the adhoc hack on the stock rom. I'm going to bite the bullet and try a non-stock ROM to see if this will resolve the problem.
@jasco: I cannot find the stock enhancement pack in searching... I might need to search harder.
Flashed this to my Gtab to test it out. Completely broke my wifi. No longer will see any wifi or adhoc networks. I had to reflash.
I don't have a phone that I can tether to, but my son does, and I just got this working w his phone.
What I did was:
- unzipped the file from that thread above, and got the wpa_supplicant file from the system/bin dir inside the unzipped dir
- turned off wifi
- used z4root to get temporary root and root explorer to make /system R/W
- used terminal to copy the new wpa_supplicant file to /system/bin
- changed permissions of /system/bin/wpa_supplicant to rwxr-xr-x
- turned wifi on
I was then able to see his SSID, and connect using WEP.
Jim
I would like to try this with my tablet and I am having a hard time understanding these instructions. can you please make a detailed set of instructions with more steps? If you would do this I am sure there would be a lot of people that would be truly grateful, I being one of them.
Thanks,
Waspvl1
All depends....
What if you don't have an Android phone?
I use WM 6.5 phone (in my case HD2) to tether to my G-tab.
Using program WMWiFiRouter. G-tab picks it up as another regular router.
Never had a problem and most important for me, don't have to go through all of the trouble configuring AdHoc.
JMO.
here is an easier method a version of the adhoc from froyo modified to support adhoc.. i was using it on my galaxy s.. now using it on the gtab works fine..
1. you need to be rooted.
2. use rootexplorer
3. turn off wifi
4. back up the existing file in /system/bin to somewhre on your sd or sd2 card.
5. using root explorer copy this file over the one in /system/bin
make sure to put /system in read/write mode (top of root explorer when in that directory) (also need to unzip it first)
I just updated my rooted tether on my droid x and now it works. Gtab sees my adhok without the zip.
yelrx8 said:
Okay, I answered my own question, but now have more problems to deal with.
I installed the "adhoc signed zipped" file with CWM. I created a new folder in the gtab root and put the "adhoc signed zipped" file in there. In CWM's menu, there is a selection to install zip/flash from an internal folder.
okay, got adhoc to work. When scanning for networks, the adhoc networks show up with the * as expected. I connected successfully to my wm6.1 phone with wmwifirouter.
However, the gtab cannot load up websites. I do see spurts of data on the phone being passed, but it seems to be spurts and it stops. Browser on gtab say check connection.
So I'm thinking that this has something to do with the adhoc hack on the stock rom. I'm going to bite the bullet and try a non-stock ROM to see if this will resolve the problem.
@jasco: I cannot find the stock enhancement pack in searching... I might need to search harder.
Click to expand...
Click to collapse
Have exactly the same problem. Been looking for a solution for quite a while. Can't understand why this should be so difficult.
I went another route, but with the same problem.
I thought the "ad-hoc signed zipped" file install from CWM as I've described about was the issue, so I went back to the stock 3389 ROM with the tnt enhancement pack.
Exact same issue, the ad-hoc connection with WMwifirouter is connected, but no internet data will pass on the connection.
Tethering without root?
I'm definitely a noob to all this, although I have had an android phone for about 6 months now. I haven't found any roms to flash to my samsung transform so I haven't gotten root on it yet. Is there a way to tether to my g-tab (Vegan 7) with out gaining root to my phone? By the way, I really like the new rom.
I'm running a wireless tether app on my rooted Droid X and can connect my gTab to it without any updates or hacks or anything else. I'm running stock VEGAn 5.1.1 without any other tweaks.
I'll flash back to VEGAn 5.1.1 and see if tethering works with out having to hack my phone.
rosscopicoterry said:
I'll flash back to VEGAn 5.1.1 and see if tethering works with out having to hack my phone.
Click to expand...
Click to collapse
FWIW, I'm running this ROM and just tried it. It connected fine to my iPhone w/MyWi. No hacking required.
No adhoc transfers with Vegan-Tab Ginger RC1
I've flashed this ROM 5 times now and ran some tests each time. I can connect to my WMWifirouter adhoc network, get an IP, but there is nothing going through...
My understanding is that this rom already has a hacked supplicant. What's my next step? Should I bother trying with the provided wpasupladhoc.6.1.zip above? Thanks in advance.
I cannot figure this thing out for the life of me. Has anyone gone the route of trying to use blutooth to connect from their android phone to the g-tab? I can get it to pair but not connect. G-tab may have to go back if I can't figure this out.
1.2-4349 Ad Hoc tether
lgkahn said:
here is an easier method a version of the adhoc from froyo modified to support adhoc.. i was using it on my galaxy s.. now using it on the gtab works fine..
1. you need to be rooted.
2. use rootexplorer
3. turn off wifi
4. back up the existing file in /system/bin to somewhre on your sd or sd2 card.
5. using root explorer copy this file over the one in /system/bin
make sure to put /system in read/write mode (top of root explorer when in that directory) (also need to unzip it first)
Click to expand...
Click to collapse
Tried it on 1.2-4349 and it appears to work just fine. Immediately detected ad hoc tether on my original Droid running gingerbread.
Does the phone need to be rooted? Or are you putting these files on the g tab?
Hello everyone, well im not sure why there isnt any support for this phone besides rooting, and im sure a lot of you already know that the Link2sd app not only doesnt work for this device but in fact it bricks it.
I have been trying to resolve this issue with no luck so far... but i have found one interesting place http://sourceforge.net/projects/i1x.motorola/files/i1x/
IN there there are the files to maybe compile a working rom? or try to push the original files to the phone in order to resolve the problem.
Does any of you knows the actual ADB procedure or any other way of doing this?.. also which file should i push to restore what the Link2sd script changed in the first place.?
I hope someone can help out..
thanks..
Hey there,
i juts got my XTZ and rooted it, using vroot (chinese app). Root check tells me that the tablet is rooted, but i am not 100% sure about that. I use adaway to get rid of those anoying ads on the web and in apps. If i install it, it ask for root permissions and installts the host file.
Browsing is ad free, but on a moment, ads are comming back and i have to repatch the host file.
Maybe its the org. kernel with problems to write at the host file?
do you have any idea what i can do ? is it possbile to go for another kernel without unlocking the bootloader over sony?
thanks a lot for your help & a happy christmas !
edit: pretty sure that /system is not rw yet, did try to fix that, but failed. anything i can do here?
edit2: it would be fine if i can edit the host file from the pc just once, without rw access from the tab itself, i just wanna get rid of those annoying ads everywhere
Hey guys, i figure this might be a longshot but if anyone has or know someone who has an android rearview mirror ie: http://www.ebay.ca/itm/201130187577?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
If you could take 5 minutes and copy some of your files using adb, you might save me from having turned my android mirror into a paperweight.
adb pull system/framework d:\files\framework
I ran some scripts and i accidentally nuked some files without having made a backup (smart i know..) i'm pretty sure the culprit is framework-res.apk but just in case the command pulls the whole framework folder.
Thanks!
---
It has a weird launcher forced into it, that cannot be replaced as far as i can tell and has an app fireeye.apk that also boots and is forced into memory. I tried to get a different launcher to work, but their interface is modified and the home button is not really a homebutton, but is hardlinked to their launcher. Trying to bypass that i managed to screw it up, also no fastboot, it uses livesuit for restore and as far as i can tell no chance of flashing the cm for allwinner as it has a really weird partition set. I'm kinda stuck.
I have one
I have 2 of these and I am interested in helping you. what do I need to do to get you a copy of the files on it?
Recovery???
How did you get it into recovery mode??? i messed something up and it wont go pass the Android logo!
Sorry to dig up an old thread.
I have one of these dashcams and the fireeye app keeps freezing on me. its really annoying. Until yesterday i have put up with it by resetting the device. Yesterday i was invloved in a minor car accident only to realise that the fireeye app had frozen again and did not get a recording of the accident. would have come in usefull.
Has anyone had problems with the fire eye app freezing and have you figured out a a way around this?
Hoping someone can help
OlvrCA said:
How did you get it into recovery mode??? i messed something up and it wont go pass the Android logo!
Click to expand...
Click to collapse
There is another thread about this
http://forum.xda-developers.com/general/connected-car/android-reversing-mirror-model-rt01-t3097492
This is the download link, and there are instruction which will tell you how to upgrade it.
http://yunpan.cn/cKzgb95TaCEJk
Password: 8880
These were the instructions I got from a seller on aliexpress.
It's a little different but maybe someone could extract from here and make yours work
Okay so I was told to come here because my phone doesn't have its' own forum yet (Not at all surprising..), so I'm just going to quote my post back on the other thread that told me to come here instead.
Mc Fow1er said:
Okay so I've had this phone for little over 10 months now and within that time I've managed to achieve root (unreliable but it works at the very least) in that time as well as learned a fair amount about Linux and android alike (Not a whole lot but I know some stuff) though I've now come to the point of I actually want to give my phone a proper root instead of this faulty solution I have currently. I (barely) managed to get my phone rooted using Kingoroot and I've played plenty with my phones' innards in that time, removed system apps, added my own selection to the system but some apps in my phone that use root don't work even with root permission granted which is why I'm wanting to replace Kingoroot with ChainFires' SuperSU binaries, could anybody help me with simple instructions for someone who doesn't actually know very much regarding how root and SU bins work inside of android? My phone's using 4.4.2 kitkat.
Just a few disclaimers first to get misconceptions out the way:
1. I do not have a custom recovery nor is one available for my phone (Samsung galaxy young 2 (SM-S130H) for those who want to know)
2. I'm currently unable to use the internet on my phone as I lack Wi-Fi to do so (router is dead) so I'm manually installing app packages through ADB, so if something needs an internet connection on my phone it's not going to work for me, for now..PC still has net access.
3. I have access to ADB shells' SU but not ADB root so I hope you don't need that from me.
4. This phone does not have a fastboot mode. (That I can find anyway..) Only a download mode from what I've found.
Can anybody help me out with telling me what I'll need to be doing in regards to getting this done?
Click to expand...
Click to collapse
So, can anyone here knowledge on the matter can assist me with this instead of me having to figure it out on my own?