Hi All,
I have upgraded to Checkrom 3.1.1 a few days back. I find that the signal is pretty weak ever since.
Can you please tell me which modem version should I use in Bangalore for Airtel? My guess is, it should be the same through out India irrespective of the provider. I have tried all of those available through kitchen and i dont find any improvement. I got KF3 as stock. But I dont find that available for CWM.
Thank you.
Bump........ anybody?
Try putting in the India KF3 CSC?
India ODDKF3 CSC: http://www.multiupload.com/8PSY68J8O3
Also, you'll get more help if you post your question in this thread: http://forum.xda-developers.com/showthread.php?t=1108787&page=407
Am on XXKI4 and it works pretty well for me here in Hyderabad on Idea. Flash it and check.
KI4 works well in Bangalore. You can find CWM flashable modems in the Android Development Thread
Related
Hi guys, I've been browsing through this forum for awhile now, very helpful threads, you guys do an amazing job!
This is my first post and I would like some help.
I'm from Canada and I ordered my S2 from Newegg.ca, so my phone came factory unlocked and right now I'm running it on the Telus Network.
Samsung started releasing their firmware updates for the different regions, but I'm really confused on witch firmware to get.
I believe my phone is running on the UK firmware but I would like to use a North American firmware, here's the detail:
PDA: I9100XWKF3
Phone: I9100XXKE7
CSC: I9100XEUKD1
Would I be able to run any firmware from any region I want without damaging my phone?
And witch firmware is for the Canadian region?
Thanks in advance.
Anybody?
I'm a noob at this, never owned an android phone before.
So please guys, you'll make me really really happy
Any rom from Dev section 1 and section 2 will work , you got standard global unlocked SGS2.
ghost77 said:
Any rom from Dev section 1 and section 2 will work , you got standard global unlocked SGS2.
Click to expand...
Click to collapse
Hi Ghost, thx for your reply.
I want to to know about actual firmware and not roms.
Can you please direct me to an actual firmware I can use for my SGS2?
and will I be able to use any firmware that's not the generic Europe+UK?
I recently bought a new phone and turns out the model is I9100T. I got it from thailand so not much of updates from kies.there is however an update to dcki3 . right now i am using dckf4. i want to root my phone and then install a european firmware.
my pda i9100tdck4
phone /csc i9100tdckf1/i9100tthlkf1
i came across many forums and they have a s2 with i9100g for malaysia which cannot be used to update with the firmwares that are available for i9100.?
so i just wanted to confirm it. has anyone tried using a i9100 firmware to update /flash with i9100t . and lastly, are there t models (refering to i9100t) the same ones that are being used in australia aswell?? are the only difference the firmware?
thanks in advance.
i have searched many the forum but didnt find an answer. i hope it will be useful to many user of the i9100t .
thanks in advance.!
da_aftamath said:
I recently bought a new phone and turns out the model is I9100T. I got it from thailand so not much of updates from kies.there is however an update to dcki3 . right now i am using dckf4. i want to root my phone and then install a european firmware.
my pda i9100tdck4
phone /csc i9100tdckf1/i9100tthlkf1
i came across many forums and they have a s2 with i9100g for malaysia which cannot be used to update with the firmwares that are available for i9100.?
so i just wanted to confirm it. has anyone tried using a i9100 firmware to update /flash with i9100t . and lastly, are there t models (refering to i9100t) the same ones that are being used in australia aswell?? are the only difference the firmware?
thanks in advance.
i have searched many the forum but didnt find an answer. i hope it will be useful to many user of the i9100t .
thanks in advance.!
Click to expand...
Click to collapse
Hi there, I know this is an old thread, but I thought i'd update it for new comers and googlers who come across this as I just did
I have flashed an ICS 4.0.3 LP7 Firmware over to an I9100T and the Firmware is an I9100 firmware, and I have no issues with it so far, signal and data speeds are fine and everything works as it should
I hope this helps somebody else
I got a new S2. Its GSM from Germany. I tried to flash an ICS Theme. But now i got bootloops. I tried to Wipe everything but it doesnt work. I am able to use Odin or Kies. Can somone help me to bring it back to where it was original. without any theme and no root? i got Odin and Kies installed. Where do i get Stock Rom for 1und1 Germany or Stock German rom and how do i install it?
which is the right firmware to download. i dont get it which one is the right one and which one is the newest to use for german language
i got these information from my rom XXKI4, KJ1
Get carrier-specific firmware here or if your carrier isn't listed in that thread get country-specific firmware here. You could also use Checkfus (do a search on here) to get the latest firmware available for your carrier that you'd normally get via Kies.
thanks a lot, but i dont know which one of the country specific is the newest and right one for me. Can you help me out?
Looks like there's only one available in Intratech's official carrier firmware thread for O2 Germany (XWKI1), Checkfus says KI8 is available for O2 Germany (Dated: 22/11/11) assuming you have a I9100 (check the sticker under your battery to make doubly sure.
I don't know which one is more recent as Intra's firmwares don't have dates on them, but I'm guessing the KI8 available thru Checkfus is more recent as this would also be available via Kies. I don't think it will make a great deal of difference which one you use at the end of the day given you don't seem to know which firmware you had on your phone originally. Either will work just fine with your phone I would imagine, provided you definitely have a I9100 or I9100T
Up to you which one you use.
typhex said:
thanks a lot, but i dont know which one of the country specific is the newest and right one for me. Can you help me out?
Click to expand...
Click to collapse
A before B 3 after 2 .
Simple pick the last one for your area .
Stock roms
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
thanks a lot for your answers. i just flashed a custom rom andy everything is good
Hello Peeps,
I have gone around in circles and lost myself
when I open the box for my new SG2, I wanted to root it
and I read all the forums about it
and my kernel was XXWKJ3
so I used that with Odin on the PDA
well it made my csc OXAKI3
well that is for Poland
and now that I wanted to get back to Factory Reset, I formatted the 16GB Internal Memory,
and used this
GT-I9100_XEN_I9100XWKJ3_I9100XENKJ1_I9100XXKI4.tar.md5
on PDA using Odin
well Now I think is in German , as it has 2 apps
DigiLezen & Samsung MMM
Version
PDA: I9100XWKJ3
PHONE: I9100XXKI4
CSC: I9100XENKJ1
MY SG2 IS UNBRANDED & UNLOCKED
I'M ON GIFFGAFF THAT RUNS ON O2 NETWORK, But for some reason I don't have in mobile networks option to select O2
can someone help choose the right PDA/PHONE/CSC
for this phone, the Stock Kernel & the Rooted Kernel
I been trying to work this out for 3 days now and still have not found a solution
Please help a Noob
thanks
Plutonian32 said:
can someone help choose the right PDA/PHONE/CSC
for this phone, the Stock Kernel & the Rooted Kernel
I been trying to work this out for 3 days now and still have not found a solution
Please help a Noob
thanks
Click to expand...
Click to collapse
Hopefully this helps.
You can get the stock firmware in this thread here.
For a beginner root kernal I would use the one available here.
Use odin to flash the kernal/firmware.
I been to both pages, and still can't figure out what is the right one, I read everything
can someone with giffgaff UK Please advice me off the right PDA/PHONE/CSC to put on my SG2, thanks
According to Intra's carrier branded firmware thread, latest firmware for O2/GiffGaff is KJ1.
Plutonian32 said:
I been to both pages, and still can't figure out what is the right one, I read everything
can someone with giffgaff UK Please advice me off the right PDA/PHONE/CSC to put on my SG2, thanks
Click to expand...
Click to collapse
will try the unbranded XWKJ1
see if that will work
if not will try the branded one
thanks
Stock O2 firmware from the provider roms thread will have the correct CSC for O2 .
Big question is why do you want to root ????
jje
Hi all, i recently flashed a custom rom to my " vodaphone australia samsung galaxy S2 I9100T" but the rom kept freezing, so i flashed a stock samsung rom ( one without all the vodaphone rubbish) but now i am getting very slow 3G speeds, and the signal qulity keeps jumpingup and down.
I have spent 2 days looking for a working download link for a different modem, but they all seem to be down.
Can someone please tell me where i can find a working download link??
I am currently using the phone on the optus network. So i would need a modem that would work on it.
And i have a nadroid backup of the original vodaphone rom, so is the anyway i can copy the modem out of it and then reflash it using odin or cwm???
Thanks in advance for any help you can give
Cheers corey
Hey man, you need to check out the Aussie thread in General section. It has all you need.
Anyway, check this post from there (MistahBungle) and flash with cwm recovery:
http://forum.xda-developers.com/showthread.php?p=22585435
Sent from my GT-I9100T
Hi, thanks heaps, i have flashed it, and it is working great now.
i searched for ages and i couldnt find it lol. thanks heaps
Cheers Corey
Great! Always comes in handy when flashing new roms .
Sent from my GT-I9100T
All those i9100T links go to multiupload still?