hi,
I am currently using miniCM7pro V16. I want to install the updated version miniCM7 pro V21. Do i need to Flash it? wipe it? I dont want to loose my apps and settings please tell me the easiest way to update. I am not an expert just a newbie so any help i will appreciate thank u.
no. u r updating from same rom. so u dont have to wipe anything. u can just store it in ur sd card as update. and boot cmw nd chose update. clear dalvik nd reboot. but i suggest u make factory reset. cos it will work fast!
i have same problem, but somehow, CWM does not allow me to update... It says "Amend scripting is not supported." Some help?
Update your CWM using CWM Installer and then try to update the ROM again.
Sent using Mini CM7 Pro by Paul
[email protected] said:
i have same problem, but somehow, CWM does not allow me to update... It says "Amend scripting is not supported." Some help?
Click to expand...
Click to collapse
Flash nAa 06 kernel, cwm is already installed there
Related
Hi guys im a total noob when it comes to custom roms I downloaded one from slade minicm6 final for my mini pro I got xrecovery working with my phone rooted all I need is for sum1 to give me step by step simplistic advice to how install the custom rom so pleeaase help! Thank u
Sent from my U20i using XDA App
Try this:
http://forum.xda-developers.com/showthread.php?p=13353505#post13353505
DON'T FORGET TO TAKE A BACKUP via xRecovery!!!
Make sure you have the correct baseband number and kernel version (I mean, meet all the requariments the ROM asks) with the ROM you want to install.
If you have any other problems, pm me and I'll guide you exactly form the point you stuck.
mibuwolf said:
Hi guys im a total noob when it comes to custom roms I downloaded one from slade minicm6 final for my mini pro I got xrecovery working with my phone rooted all I need is for sum1 to give me step by step simplistic advice to how install the custom rom so pleeaase help! Thank u
Sent from my U20i using XDA App
Click to expand...
Click to collapse
well before installing custom ROM all you have to do is
1. reboot to xrecovery
2. in the advanced options, wipe dalvik-cache and battery stats
3. press back button
4. wipe cache
5. install custom zip > install custom zip from sdcard
6. look for slades minicm6 file and apply.
make sure you have the correct baseband, kernel version so you'll not be having problems
Rooting and XRecovery (Video)
Don't know if you already made it.. but here you can find some more help.. this was the way I learn how to do it..
http://xperiaminicyanogen.wordpress.com/installation-guides/
Hope this is helpfull for you as it was for me..
Remember to thanks the blog creator.
Hi,
I'm also a noob here. What is the baseband and kernel does not meet the requirement of the rom i gonna flash, where can i get the updated baseband and kernel? Try to find around the forums but can't find any answers. Please help.
Thanks.
bigwig said:
Hi,
I'm also a noob here. What is the baseband and kernel does not meet the requirement of the rom i gonna flash, where can i get the updated baseband and kernel? Try to find around the forums but can't find any answers. Please help.
Thanks.
Click to expand...
Click to collapse
plug ur phone to PC and using either SE PC companion or SEUS and follow how to update ur phone from there
u can get the software at SE website
Hey, I already have MiniCM6 installed and I'd love to give nobodayAtall a big thankyou. I want to upgrade to CM7.. Can I just install again from xRecovery or do I have to format my phone to the default firmware and then install it.. Thanks.
Imitate said:
Hey, I already have MiniCM6 installed and I'd love to give nobodayAtall a big thankyou. I want to upgrade to CM7.. Can I just install again from xRecovery or do I have to format my phone to the default firmware and then install it.. Thanks.
Click to expand...
Click to collapse
just read the instructions in the thread.
(no you don't need to go back to stock , just perfom a backup, and a factory reset before installing the rom)
Hi I have a x10mini pro which I have rooted and installed xrecovery for.
The problem came when I tried installing the "slade87_MiniCM6_v5.0_XRECOVERY" custom rom because for some reason it sticks on the startup:
(viewimage)
My baseband version is M76XX-TSNCJOLYM-534040415
I can root and install xrecovery fine. But The main part I dont understand is installing the Custom Rom.
Could anyone help me?
when installing the rom did you do a factory reset?
if you did then try installing a different rom maybe that will work?
if none of them work try using cwm (ClockWorkMod)
Yeh it worked with a factory reset Thanks guys.
Btw can this phone download the latest flash player?
I'm using x10 mini currently running on minicm 1.0.1 (Its clear that my phone is rooted and runs custom roms).
Now i wanted to switch to ClockworkMod Recovery over xRecovery.
The cook of minicm rom incorporates with CWM and has given an attachment of cwm telling to flash it with xrecovery. I'm unable to understand the process of flashing - whether to go into update.zip or custom.zip from top of xrecovey menu.
Please anyone suggest small guide to help me out!
Thank you.
EDIT: I flashed the cwm.zip with custom.zip ->Install custom.zip from sdcard from xrec menu And it worked !
I was just geting too serious .
Thank you everyone for helping me !
You can use Snoopo's installer http://forum.xda-developers.com/showpost.php?p=14479740&postcount=75
or U can use xRec zip to change it into CWM, if U want it I can provide U a link
jodhaniohm97 said:
I'm using x10 mini currently running on minicm 1.0.2 (Its clear that my phone is rooted and runs custom roms).
Now i wanted to switch to ClockworkMod Recovery over xRecovery.
The cook of minicm rom incorporates with CWM and has given an attachment of cwm telling to flash it with xrecovery. I'm unable to understand the process of flashing - whether to go into update.zip or custom.zip from top of xrecovey menu.
Please anyone suggest small guide to help me out!
Thank you.
Click to expand...
Click to collapse
nycdream said:
You can use Snoopo's installer http://forum.xda-developers.com/showpost.php?p=14479740&postcount=75
Click to expand...
Click to collapse
No, he can't, he have a mini, not a mini pro
Hi,
guys i have been reading a lot so that i could try to get a clear answers but i am still a bit confused.
I have successfully rooted my X10 min pro having stock rom 2.1 update 1 and also i have used the flash tool to install xrecovery. I am trying to install the Mini CM7 Pro v 21 and i read that i need CWM4 for it. So i wanted to know does that mean i can't install with Xrec?
Also if i have to install CWM how do i do that since i must clearly say that there is too much information that i have gone through and really it is not making too much sense.
so can anyone please give me a clearer idea on installing the CM7 on my X10 min pro.
Thank You
adi231189 said:
Hi,
guys i have been reading a lot so that i could try to get a clear answers but i am still a bit confused.
I have successfully rooted my X10 min pro having stock rom 2.1 update 1 and also i have used the flash tool to install xrecovery. I am trying to install the Mini CM7 Pro v 21 and i read that i need CWM4 for it. So i wanted to know does that mean i can't install with Xrec?
Also if i have to install CWM how do i do that since i must clearly say that there is too much information that i have gone through and really it is not making too much sense.
so can anyone please give me a clearer idea on installing the CM7 on my X10 min pro.
Thank You
Click to expand...
Click to collapse
1-U have to find and download (latest CWM.zip)
2-Move the xxx.zip to sdcard (root directory) (don put in any folder)
3-boot into xrecovery
4-sellect install from sdcard
5-choose your xxx.zip (on step 1)
or u can try this
1-find any custom room which one can install using xrecovey BUT!!
the custom room must be dual recovery preinstall (Xrecovery and CWM)
2-Now u already hace CWM recovery now you can install what ever rom U liked
To install MiniCM7 Pro v 21, you must have the CWM and not required cwm 4.
to install cwm, see here -> http://forum.xda-developers.com/showthread.php?t=1257701
sorry for my bad English
Don,t forget to press thanks if i can help you.
stiv8785 said:
To install MiniCM7 Pro v 21, you must have the CWM and not required cwm 4.
to install cwm, see here -> http://forum.xda-developers.com/showthread.php?t=1257701
sorry for my bad English
Don,t forget to press thanks if i can help you.
Click to expand...
Click to collapse
Thanks but i have already installed xrecovery through the flash tool,so you are telling me i have to install CWM to install v21? I am asking because nelikp didn't talk anything abt CWM.
I want to know since i have installed xrecovery can i still use this method http://forum.xda-developers.com/showthread.php?t=1257701
to install CWM?
Will i do any harm if i install CWM as given in the above thread?
EDIT: I hope there is no problem installing CM7 v21 in X10 mini pro
You can install CWM with teh CWM Installer (from the Thread you posted above).
Then you can boot into CWM and install MiniCM7 pro V21. Read and follow the instructions in first post of the MiniCM7 pro thread and you will be happy about the fantastic ROM.
Hi Adi,
I've installed MiniCM7 Pro v21 with XRecovery for my X10 MP and it's works just fine. I haven't found any problem until now.
And delete these apps before install the rom if you don't need it
DSP Manager
Gmail
Google Maps
Latitude
FOTA KILL (GOOGLE OVER THE AIR UPDATES)
Pico TTS (text to speech program/interface)
Voice Dial
Voice Search
Fotakill -prevents- over the air updates. I'd keep it unless you want an incompatible update killing your system ;-)
Sent from my U20i using xda premium
Thanks for the confirmation but i was confident enough and installed CWM 3 r5 and it is working on my mini pro, i just need some time to install the OS. i didn't know that CM7 had gmail in it. I though we need to flash teh gapps after installing CM. i usually don't use too much apps, any way can anybody please point me on how to save app2SD guide since i have gone through many and they are making a little bit sense but still not clear. Also there is a option of partition in CWM itself can i use it?
Edit Wanted to know can i use my stock kernel to install a custom ROM,since i looked at Zombiepack kernel and it rquires unlocking bootloader which seriously i am not confident doing since i am not able to understand clearly
adi231189 said:
Thanks for the confirmation but i was confident enough and installed CWM 3 r5 and it is working on my mini pro, i just need some time to install the OS. i didn't know that CM7 had gmail in it. I though we need to flash teh gapps after installing CM. i usually don't use too much apps, any way can anybody please point me on how to save app2SD guide since i have gone through many and they are making a little bit sense but still not clear. Also there is a option of partition in CWM itself can i use it?
Edit Wanted to know can i use my stock kernel to install a custom ROM,since i looked at Zombiepack kernel and it rquires unlocking bootloader which seriously i am not confident doing since i am not able to understand clearly
Click to expand...
Click to collapse
You can install the ROM MiniCM7 Pro v 21 and GintonicSE v2.5.1 (with modules) in the stock kernel. custom ROMs have natife app2sd and don't need second partission, I use Pro v21 MiniCM7 and existing Gmail.
Sorry for my bad English
Thanks a lot for confirming i will try first MiniCM pro then Gintonic one's i know what i am doing.