so i was cleaning up and starting with fresh install of miui from jt's vanilla. threw phone into download mode and went to flash 2.2 files. at kernel install phone froze and odin failed. So i started over. Now every time i try to flash phone screen changes colors (solid blue, red, purple) and wont finish?! Modem, kernel, and recovery all flashed fine individually but rom wont finish. any suggestions?
Edit: downloaded, installed and ran heimdall - and get "Failed to retrieve config descriptor"
Try this
phoenix727 said:
so i was cleaning up and starting with fresh install of miui from jt's vanilla. threw phone into download mode and went to flash 2.2 files. at kernel install phone froze and odin failed. So i started over. Now every time i try to flash phone screen changes colors (solid blue, red, purple) and wont finish?! Modem, kernel, and recovery all flashed fine individually but rom wont finish. any suggestions?
Edit: downloaded, installed and ran heimdall - and get "Failed to retrieve config descriptor"
Click to expand...
Click to collapse
Happened to me too, bad download with the Atlas v2..2 file use this guide
http://forum.xda-developers.com/showthread.php?t=1212239
Re-download all the files. good luck
miamislim said:
Happened to me too, bad download with the Atlas v2..2 file use this guide
http://forum.xda-developers.com/showthread.php?t=1212239
Re-download all the files. good luck
Click to expand...
Click to collapse
totally wish that was the issue...
after heimdall windows sees the device, but odin no longer pics it up. phone no longer powers on other than dl mode.
*starts researching how to unbrick the totally F***d*
Edit: lols... i got a new color this time! light blue, its very relaxing... i may have thrown my phone out the window if i saw the darker blue again. sigh
There is info about a jig that can help Odin recognize your phone
---------- Post added at 03:01 PM ---------- Previous post was at 02:58 PM ----------
I've seen the solid color phone flash issue before on the CM7 thread and they got out of it. Stand by I will see if I can track it down for you...
after re installing usb drivers on my computer i got odin to see my phone again. tho im still getting "colored screens" while trying to push factory.rfs. phone powers on again outside of DL mode but sits on samsung screen indefinitely. Im off to work tonight w/o a phone. but if you can find that fix at some point that would be fantastic.
Okay try this
Here is where I saw it
http://www.galaxyforums.net/forum/fascinate-rs-guides/2911-how-upgrade-cyanogenmod7-16.html
It starts on page 15 and after a few obvious (often overlooked ideas) ie re-boot computer, stock cable/different cable, etc. they fixed it
other things to check
use a powered usb port on your CPU
try DL mode with battery in and battery out
re download files
check re-partiton after adding atlas file v2.2
Typically it seems the problem is the cable.
Hope this helps
Ill try all of these, thanks for your help/time.
Edit: So i spent a good chunk of the night asking co-workers to borrow their phone cables and after the fourth one i finally found one that worked. a Motorola cable. Thanks so much for the help i thought i might have been screwed since i couldn't find a single thing on it. Yay, my flash happy A$$ is back at it once again!
Sweet!
Glad to hear it and welcome back
phoenix727 said:
totally wish that was the issue...
after heimdall windows sees the device, but odin no longer pics it up. phone no longer powers on other than dl mode.
*starts researching how to unbrick the totally F***d*
Edit: lols... i got a new color this time! light blue, its very relaxing... i may have thrown my phone out the window if i saw the darker blue again. sigh
Click to expand...
Click to collapse
Well I am glad that you didn't do that.
Related
I decided to flash the vibrant 9 rom onto my phone. I was going to try and put the stock tmobile back on. I can never get odin to start flashing so i have to disconnect and start all over again like 2 dozen times to get it to work. I have no clue why i have to do that, but anyway. I got to the phone computer screen, so i tried again. I forgot to put the files into odin and i clicked start. THE PHONE REBOOTED BACK TO WORKING ORDER. I dont know if this is known, but i found it a bit of a cool little accident i had. If this helps someone it helps. thanks
I never heard of that, but thats pretty cool, ill test that next time i F*** up in oidin.
tgrantjr said:
I decided to flash the vibrant 9 rom onto my phone. I was going to try and put the stock tmobile back on. I can never get odin to start flashing so i have to disconnect and start all over again like 2 dozen times to get it to work. I have no clue why i have to do that, but anyway. I got to the phone computer screen, so i tried again. I forgot to put the files into odin and i clicked start. THE PHONE REBOOTED BACK TO WORKING ORDER. I dont know if this is known, but i found it a bit of a cool little accident i had. If this helps someone it helps. thanks
Click to expand...
Click to collapse
hmm i wish i came across this before i shipped my phone off lol
tgrantjr said:
I decided to flash the vibrant 9 rom onto my phone. I was going to try and put the stock tmobile back on. I can never get odin to start flashing so i have to disconnect and start all over again like 2 dozen times to get it to work. I have no clue why i have to do that, but anyway. I got to the phone computer screen, so i tried again. I forgot to put the files into odin and i clicked start. THE PHONE REBOOTED BACK TO WORKING ORDER. I dont know if this is known, but i found it a bit of a cool little accident i had. If this helps someone it helps. thanks
Click to expand...
Click to collapse
So your phone was on the phone computer screen and you were able to plug it into the computer and get odin to fix it by flashing with out putting the files into odin?
speoples20 said:
So your phone was on the phone computer screen and you were able to plug it into the computer and get odin to fix it by flashing with out putting the files into odin?
Click to expand...
Click to collapse
That is how it sounds to me. Odd to say the least.
Yeah when I tried to flash it constantly gets caught on cache.nfs. When i stop it like unplug it to try again if i try to boot it gives the phone/computer screen. I stopped and unplugged everything and pulled the battery. I held the volume buttons like normal and plugged the usb back in to get it to download mode, and completely forgot to add the phone and pda files. There were absolutely no files put into odin it basically looked at the phone and rebooted it. Vibrant came up and it booted like normal. I can try to make a video on monday if you want to see what im talking about.
tgrantjr said:
Yeah when I tried to flash it constantly gets caught on cache.nfs. When i stop it like unplug it to try again if i try to boot it gives the phone/computer screen. I stopped and unplugged everything and pulled the battery. I held the volume buttons like normal and plugged the usb back in to get it to download mode, and completely forgot to add the phone and pda files. There were absolutely no files put into odin it basically looked at the phone and rebooted it. Vibrant came up and it booted like normal. I can try to make a video on monday if you want to see what im talking about.
Click to expand...
Click to collapse
Oh so you put your phone into download mode. I thought you were on the phone computer screen. Figured it might help with hardware locked phones.
My phone is stuck on the vibrant scree and nothing happens........ i am trying to use odin to flash back to stick and it is always stuck on file analysis.....please help!!!!!!!!!!!!!!!
Try this: http://forum.xda-developers.com/showpost.php?p=8445823&postcount=11
Well mine just sits on file analysis for 10 mins and nothing else happens...can someone please help me i have no phone.
Remove the USB from the phone, remove battery.
Place the battery back in your phone and get back into DOWNLOAD MODE
Close Odin
Run Odin as Administrator
Select the 512 PIT FIle
Select the T959UVJFD.tar file for PDA
Plug in your phone (Make sure you see a COM Port come up)
Start Flashing
rolf90 said:
Well mine just sits on file analysis for 10 mins and nothing else happens...can someone please help me i have no phone.
Click to expand...
Click to collapse
as you i had the same problem and finally got it to work by watching this video on you tube:
1.go to you tube
2.search for flash vibrant
3.first video should be "Flashing Firmware with Odin on Samsung Vibrant" by ZDoomentral, its a 3:00 min video
(sorry can't post direct link but i a restricted since i am a new user)
pay close attention as to how he gets his phone into DOWNLOAD MODE, thats where i was going wrong, and just follow the directions of the video.
my phone is up and running with stock kernel and re-rooted it
man i just want to say i just had this same issue happen to be... im a truck driver and having my phone is serious... mainly to play games or what not...but i just got some from Minnesota and tried the odin method and saw that video on you which help give me a visual and its back up ... im very happy... sad to say it was a careless mistake somewhere but i did a back like i always do and it didnt work for some reason...i had a g1 before this vibrant and ive flashed a lots of roms... but anyway i wanna thank everyone one this forum ... i got my phone back
Does this restart the WHOLE THING? because I have information I didn't backup :/
Yes. It deletes EVERYTHING. Just like it's brand out of the box.
I recommend using Titanium Backup and back all your apps. ALWAYS ALWAYS, do a Nandroid backup before flashing ANYTHING.
scootatheschool1990 said:
Does this restart the WHOLE THING? because I have information I didn't backup :/
Click to expand...
Click to collapse
If you have adb up and running & have the ability to get into recovery while you're bricked you can do aN adb pull before flashing
Adb remount
Adb pull /sdcard
After un-bricking you can adb push the folders back
When I did it..it flash back to stock but I have titanium back up so mt phone is back to how I had it ...and I still have every thing else back on, like my movies music etc..
Sent from my SGH-T959 using XDA App
I was trying to help my friend with his Vibrant and now it's stuck at the splash screen in a loop. I can't seem to get it to download mode or recovery or anything. I've pulled the battery, held down both vol keys while pushing power. Any time I connect the usb, it just starts up the boot loop without giving me a chance to do anything else. I can never get to the green charging battery. Any ideas?
I guess I could provide more info... We had rooted the phone multiple times, but Superuser would FC every time. So, we decided to flash eugene's froyo build (http://forum.xda-developers.com/showthread.php?t=740558). That's when I got the boot loop. Odin said it was finished, and it did not go into recovery. It just started boot looping. Maybe I didn't wait long enough before hitting the power? I'm not sure. Anyway. I'm stuck.
EDIT: Unstuck now. I guess I just need to not panic and read more. I held both VOL keys in while connecting to USB and it went into downloading mode. SO, I flash a stock 2.1 ROM and it's back to the way it was. Calling works fine. No data though. Apparently, that was one of the issues before. I'll try rooting again, but it seems like there's another issue. Also... No settings survive reboots. Like turning on USB debugging... Strange.
I have a fascinate and have successfully rooted it, flashed the cricket info (i got talk and text) and had 3g at one point. All of the sudden 3G went out. I put CYANOGEN on there, latest 7.1 i believe for the fascinate.
Upon trying to revert back to the original ROM so I can get in there with PST and CDMA WS, I encountered a very strange set of problems and now I am just stumped. I tried to ask a couple of other people and no one seems to know what is happening.
Here is what happens, I try to put the original ROM on there, by using ODIN and doing the atlasv2.2 pit file, and the original ROM, froyo, and the other one eclair i think.
When I use odin it gets to the system part, then right after it goes to the part that would take the longest, and I forgot what its called, dataFS? it has FS at the end, and then the phone (while odin is still going) will go to either a blue screen or a green screen with no words. If you look closely, it appears there is a clock at the top right just like if the phone was on.
I have not overclocked this device at all so thats one thing that can be ruled out.
I've tried odin using both battery in and battery out method as different guides have stated different things. When the battery is out, I get a blue screen. When its in, i get a green screen.
The screen appears right after the normal odin screen, with the status bar, but it will dissapear when it comes to the dataFS part (right after system) then it will take about 20 - 45 minutes and I will get an error screen on odin.
Funny thing is i've used odin and that method and it worked the last time. It works fine if I need to flash a clockwork recovery. However, upon booting into recovery, half the time I will get an error that has to do with BUILD.prop and SCH-I500. This is when I try to flash any rom except MIUI. For some reason, MIUI kicks this phone around and its the only rom that works. CM7 wont work, stock won't and every other rom wont.
So, to sum it up, my main problem is ODIN and its funky behavior, and not being able to go back to stock so I can see if my 3g settings are correct. If you have any information, even if its just something to help get my wheels turning, then please post it up, any and all help is greatly appreciated folks, thanks.
I dont know if this would work but if u think the problem is Odin then I would uninstall odin and reinstall the newest version available. Also, make sure the phone driver software get done the same.
Then after that I would try odin again. Phone off, battery out. Open odin. Plug in usb. Make sure phone set usb to debug. Hold vol down button. Odin should see your phone.
Im sure u know all the steps up to this point but try again.
Good luck
Or u can try running odin as Admin on the comp.
Also if the problem persits I saw a user had a similar problem and of turned out to be his usb cable so try a different one if you can't fix it.
Sent from my ADR6350 using Tapatalk
See, thats what I thought too, but I will give it a shot and see. I doubt its the drivers, odin or the program, file or anything else because it does work with clockwork, and i've downloaded it several thousand times, plus it works great when I do anything but flash the original rom, odin will go fine. Drivers seem fine, it communicates and all that perfectly so I also highly doubt that.
I will get another cable and just try it on a whole different PC to see what happens. I was really hoping someone had this happen and had a fix but I might have to do some heavy delving. THANKS GUYS! I will try this and report back.
It was the cables, used a brand new USB cable and it worked, strangest thing that a cable can work but not work and its just a bunch of wires, but almost all my audio cables have to be bent or else you will loose a channel. I guess its just poor quality materials. So thank you, it works now and it was just the USB cables.
Early yesterday I launched Kies and hit the update firmware option from the tools menu to see if the alleged ICS update was available for my phone. It appeared it was with, a message promoting that it would clear all personal data from the phone, which I then selected cancel so I could do a backup of pictures/videos on the phones internal SD.
Without doing any sort of backup yet I shutdown the phone, only for it to freeze on the shutting down screen. After 20 mins I pulled the battery and let the phone cool down since it had gotten warm trying to shut itself down. After replacing the battery and turning on it was stuck in a bootloop with only the SGS2 logo, never reaching the ATT logo.
At that point I came to XDA, which I frequently browse but have yet to root, and began reading and searching everything I could find.
Hours later I decided to attempt to flash the stock firmware from sammobile.com using Odin. The flash took a long time and I assume never completed. I left it overnight since I didnt want to unplug it mid-flash. Checking back in the morning the phone is black, Odin says failed/disconnected, and I find the battery completely drained. I charged it for a while then tried turning it back on and got the yellow triangle "firmware upgrade encountered an issue..." screen.
Now i'm attempting once more to flash the firmware but again it has been 30 mins on Sbl.bin. I've had a hard time finding stock firmware in different varieties with working links, so to not increase the flash counter in the event I ultimately have to send it in for repair.
Any suggestions on where to go from here? I've followed every direction I can find for flashing stock firmware and nothing has been successful.
Glad to help if I can. Please tell me exactly what package you flashed from sammobile, with a link if possible.
You should change the title of the thread.... I killed my phone. LOL!
http://forum.xda-developers.com/showthread.php?t=1313659
I attempted to flash I777UCKH7, 2011 August, USA (AT&T)
w.sammobile.com/firmware/?page=3&t=1&o=1&m=SGH-I777&r=-1#modelsa
BROKKANIC:
I've tried the steps in that thread, the One-click Oden does not have the phone showing up in any boxes, yet it still shows up in the non-One click Oden.
nett3 said:
I attempted to flash I777UCKH7, 2011 August, USA (AT&T)
w.sammobile.com/firmware/?page=3&t=1&o=1&m=SGH-I777&r=-1#modelsa
BROKKANIC:
I've tried the steps in that thread, the One-click Oden does not have the phone showing up in any boxes, yet it still shows up in the non-One click Oden.
Click to expand...
Click to collapse
Try this.....
2c.) How to root by flashing Entropy512's Return/Unbrick to Stock, Kernel + Rooted System Package with Modem using Odin3 One-Click Downloader (Windows)
Download the "Odin3 One-Click Downloader Stock I-777 UCKH7 with Root no BL" package from Hotfile. Extract the contents of the zip file to a directory on your hard disk drive. This is a One-Click version of Entropy512's Return/Unbrick to Stock, Kernel + Rooted System Package plus stock modem from the development forum. (Contains stock zImage, factoryfs.img with root, and modem.bin.)
Start the Odin3 One-Click Downloader program by double clicking on "I777UCKH7 OCD With Root.exe".
Now Enter Download Mode:
With the phone powered off, plug in the usb cable while holding the vol up + vol down buttons (but not the power button).
When the warning screen appears, press Volume up to continue into download mode.
In Odin, the small edit box in the upper left corner will turn yellow, and say something like [0:COM8]. The number could be different.
Click Start. Watch the progress bar advance in green while the message box in the lower area describes the steps. When the flash is finished, the top left larger edit box will turn green and say PASS! and your phone will automatically reboot.
Unplug the usb cable from you phone after it boots up. Success. You're Rooted.
SOURCE: http://forum.xda-developers.com/showthread.php?t=1311081
creepyncrawly would know better. It's his thread.
Download the file from below post to go back to stock I777UCKH7. Follow the instruction written in the post. I just had the same a while ago using the mobile odin to go back to stock. Got stuck on Samsung Galaxy SII screen. Pulled the battery and then followed the instructions from this post. I selected the one that says no BL 'I777UCKH7 OCD No BL'.
http://forum.xda-developers.com/showpost.php?p=18859438&postcount=199
Once you are done with the stock restore. To upgrade to ICS LE5 follow the instructions from below post. Make sure you read and follow the instructions as mentioned in the post.
http://forum.xda-developers.com/showpost.php?p=27707563&postcount=83
nett3 said:
I attempted to flash I777UCKH7, 2011 August, USA (AT&T)
w.sammobile.com/firmware/?page=3&t=1&o=1&m=SGH-I777&r=-1#modelsa
BROKKANIC:
I've tried the steps in that thread, the One-click Oden does not have the phone showing up in any boxes, yet it still shows up in the non-One click Oden.
Click to expand...
Click to collapse
You downloaded I777UCKH7_I777ATTKH7_ATT and extracted I777UCKH7-rev02-home-low-cl503881.tar.md5?
Flashed the .tar.md5 in the pda slot?
What version of Odin are you using?
Edit: You're getting lots of advice here. Let me know if you need me to help troubleshoot your issues.
BROKKANIC/krips2003: Thanks for helping so far, but no luck. Those both link to the same Odin One click. This and another one click I tried do not show the phone connected to any COM#. But, in the non-one click Oden the phone shows up. I have pulled the battery and changed USB ports and it still will not show up in the one click.
In the mean time I'll see if there's a solution for that, but I'd like to hear any other suggestions.
Edit: I get the feeling Odin is not starting the write process, since neither the progress bar or words show up in the box above COM# until AFTER I unplug the phone, at which time it flashing quickly then displays Failed.
nett3 said:
BROKKANIC/krips2003: Thanks for helping so far, but no luck. Those both link to the same Odin One click. This and another one click I tried do not show the phone connected to any COM#. But, in the non-one click Oden the phone shows up. I have pulled the battery and changed USB ports and it still will not show up in the one click.
In the mean time I'll see if there's a solution for that, but I'd like to hear any other suggestions.
Edit: I get the feeling Odin is not starting the write process, since neither the progress bar or words show up in the box above COM# until AFTER I unplug the phone, at which time it flashing quickly then displays Failed.
Click to expand...
Click to collapse
Try using another micro usb wire if you have one. If not then get one from radioshack or bestbuy. I had the almost similar issue on my captivate with the original USB cable. Then I got a Rocketfish one from bestbuy and it worked like a charm.
I'm sure you might have already done this. Make sure you first run the ODIN and then put your phone in download mode.
krips your a genius!
The one click is now working thanks to the suggestion to pay attention to order of operations. I must have never plugged the phone in AFTER starting the one click. This was easily overlooked when I've been switching the phone between 2 PCs and 3 micro usb cables.
I now have a progress bar and have had made more progress than in the last 24 hours. Even after searching I did not find this solution, even though it's stated in the directions and it seems trivial, maybe it should be emphasized the one click needs to phone plugged in after it's running.
Thanks again. I'll update this post when it's back to being a phone again.
PS. BROKKANIC: you were right, if I didn't kill my phone then I sure was the impeding factor in its recovery.
Good news/bad news. Still stuck in bootloop, but now have SGS2 logo instead of yellow triangle. Trying to enter recovery mode crashes the phone soon after it appears.
Is this a bootloader problem, kernel problem, or something else?
LOL!. Glad you got it working.
nett3 said:
Good news/bad news. Still stuck in bootloop, but now have SGS2 logo instead of yellow triangle. Trying to enter recovery mode crashes the phone soon after it appears.
Click to expand...
Click to collapse
Flash back to stock first.
BROKKANIC said:
LOL!. Glad you got it working.
Flash back to stock first.
Click to expand...
Click to collapse
I believe that what I have been doing. I ran I777UCKH7 OCD With Root.exe, which resulted in bootloop, then ran I777UCKH7-CL503881-No-BL.exe, which also resulted in bootloop. Both completed successfully, but resulted in the same bootloop.
Odin appears unable to flash anything without it being a one click. I'm trying to flash Siyah-v2.6.14-att.tar. But Odin hangs at zImage with no progress bar.
What operating system you using: if windows 7 are you running as administrator ?
hd779 said:
What operating system you using: if windows 7 are you running as administrator ?
Click to expand...
Click to collapse
I've resorted to my WinXP laptop which has been more successful than my Win7 desktop. On the Win7 attempts everything is run as admin, but has many time bluescreened and hard reset the whole PC when attempting to flash anything with Odin. Maybe a separate issue, maybe not. But the XP machine is atleast successfully flashing the Odin one clicks.
Update: Odin standalone (non-one click) appears to be unable to flash anything, it will only hang when trying to write. One click Oden packages seem to work. Is there a one click with full stock sbl, param, kernel, etc?
I think your problem is you flash to stock with packet include bootloader, so that is the reason why your phone is brick.
I'm using this: http://forum.xda-developers.com/showthread.php?t=1691659 for stock UCKH7. This is non-root version and work very well for me. It include sbl, kernel and param, ...
gefox4vn said:
I think your problem is you flash to stock with packet include bootloader, so that is the reason why your phone is brick.
I'm using this: http://forum.xda-developers.com/showthread.php?t=1691659 for stock UCKH7. This is non-root version and work very well for me. It include sbl, kernel and param, ...
Click to expand...
Click to collapse
I haven't flashed a package with a bootloader yet. The only ones that work for me are Odin one click packages, and the two I've tried do not have bootloaders. I've been looking for one WITH a bootloader but no such luck yet, since maybe that would solve the problem.
The guide/link you've suggested will not work for me at this time. I do not have the ability to boot into any andriod OS. The only capability my phone has is executing Odin one click packages for some reason, even Oden standalone firmware flashes do not work.
I had a similar issue...I eventually got mine stuck at the ATT droplets....
Finally I flashed back to 2.3.4 stock....did the ota...then upgraded to ICS.
Its all on my work laptop so I wont be able to post any specific files or their names until monday...
Good luck!
Once your phone gets to the boot screen try to get into stock 3e (both volume buttons + power till 2nd SGSII splash screen) recovery and do a factory reset. Should boot after that. Good luck.
Sent from my SAMSUNG-SGH-I777 using xda premium
Why not try a custom ics rom? What else do you have to lose? Staying stock is overrated anyways. You may also have an antivirus stopping Odin but I doubt it. Just turn off your antivirus and try.
Sent from my SGH-I777 using xda premium
Hi guys im not quite new when it comes to android.
last night i was trying to upgrade and flash a CWM on my friends vibrant whe it stopped. i turned off the phone when tries to turn it back on.... the phone quite turns hot and not like my phone when im flashing it.
i got all the files download and read all of the instructions before starting ofcourse.
first the phone doesnt turn on, then i manage to enter the DOWNLOAD MODE again but somehow the Laptop doesnt detect and gives a yellow punctuation mark on the device. i tried to install and flash the rom but it doesnt continue. i tried putting or plugging it to a diff port but still no luck.
can someone help me and answer this question? is this thing hard bricked = im screwed
any help would be gladly appreciated. thanks again guys in advance
Try a different USB cable as well as a different USB port.
http://forum.xda-developers.com/showthread.php?p=30831184
Read that post, then, read the thread from page 1, just so I don't feel like I've had the same conversation twice in 1 day.
Shouldn't take long its only a few posts. See if this applies to your situation.
thanks boss but i tried the cable with my galaxy mini and it worked when i tried to flash and went back to stock rom. changed the port as well but still no luck....
the phone as well doesnt turn on like the way of a soft brick. a picture of a phone wanted to be connected to a pc, black screen it is though but the phone goes to DOWNLOAD MODE
Try reinstalling drivers from AIO toolbox. Open Odin as administrator. What does Odin say exactly? Is there a yellow box, if so what does it say in it?
i tried reinstalling the drivers i have downloaded but still no luck, odin detects the phone and when it doesnt i re-install the driver so the computer would detect the COM port of the phone. the odin doesnt push through and no BLUE bar on the phone it self. such as the indicator for the flashing. i tried as well running odin as the administrator but still no luck. so do you think that this could be a hard brick, i dont think so cause i can still enter the DOWNLOAD mode of it. the phone turns hot when im on the download mode. could this be a hardware problem.
No its probably not a brick. I think its a communication issue. I would still think its possible to fix it. As far as it getting hot, not sure but the fact that it gets to download mode is a beacon of hope.
I've got to go to bed, will be back tomorrow to check on this.
yeah i hope thesame way too man. thanks for the reply.... time for you to take some rest. thanks again. i'll post the reply if ever the phone gets fixed
thanks for everything man, the phone now is resurrected after JTAGGING. but i know that those technicians who charged me 1000php just did the flashing on ODIN. i know the thing i've done wrong why it didnt work the first time. now it is running up again. the firmware that was flashed was for TELUS. it now shows T959D. i'll follow the guide fully on flashing and upgrading this thing
I had the same problem as you this morning. I tried driver, after driver, after driver and nothing worked. Eventually I gave in and used my sister's laptop and that did the trick. Mabuti ayos na ang cp mo. Ingat.