Hi I installed URUKDroid on my 101 quite a while ago and I can not even remember what tut I used. Anyway it worked fine but now my sd card has died and ive had to change it.The old one was partitioned and had aps on it ( I think) so now nothing will install. URUKdroid still boots but nothing will install from market and I have lost all my aps .
Can I just install stock rom as normal or will this brick device? or os there away to sort the new sd card out so it works again?
Install a new sd card. I would then try going into the recovery menu and reinstalling Urukdroid. I cant remember 100% which option it is but you can reinstall while using existing data. meaning you can have a fresh install with all of your data intact.
Correct me if Im wrong......
Related
I have recently upgrade to android 2.3.3 and am using EWJET as a rom.
I cannot access the SD once Android OS has booted. All apps and the system/settings says SD Card isn't mounted. Tried multiple installs, nothing works.
All 2.1/2.2 Roms are fine.
If i tap back during start-up and access xrecovery I have normal access to the SDcard and can flash packages etc. So the phone is able to access the card ok.
My SD card is the 8gb that came with the phone and isnt partitioned in anyway.
However in the past I did have it partitioned, but not now. Incase I am installing 2.3.3 and the rom wrong, ill tell you my steps.
Factory Firmware 2.1 flashed
rooted, busybox and recovery installed
Flashed X10i_3.0.1.G.0.75_only_kernel_baseband
then install the EWJET rom as per his instructions..
I pray I am only doing the above steps wrong as I desperately want the SD working on 2.3.3.
Any help would be appreciated.
Brent
having something similar:
http://forum.xda-developers.com/showthread.php?t=1201915
brent0r said:
I have recently upgrade to android 2.3.3 and am using EWJET as a rom.
I cannot access the SD once Android OS has booted. All apps and the system/settings says SD Card isn't mounted. Tried multiple installs, nothing works.
All 2.1/2.2 Roms are fine.
If i tap back during start-up and access xrecovery I have normal access to the SDcard and can flash packages etc. So the phone is able to access the card ok.
My SD card is the 8gb that came with the phone and isnt partitioned in anyway.
However in the past I did have it partitioned, but not now. Incase I am installing 2.3.3 and the rom wrong, ill tell you my steps.
Factory Firmware 2.1 flashed
rooted, busybox and recovery installed
Flashed X10i_3.0.1.G.0.75_only_kernel_baseband
then install the EWJET rom as per his instructions..
I pray I am only doing the above steps wrong as I desperately want the SD working on 2.3.3.
Any help would be appreciated.
Brent
Click to expand...
Click to collapse
you try pulling it out and blowing on it like an old nes game...
jk smiles but have you tried perhaps throwing the sd into a computer and just formatting with different cluster sizes or in general formatting the card. Might need to use an adapter.
Happen the same thing to me but with wolfbreaks rom... some people told me to re-flash the rom but it didnt work. The funny thing is the the sd card will work on any other device, and any other sd card will work on the phone... havent try re-formatting the card cauze i dont have the adapter but it should work
Sent from my X10i using XDA App
J!K said:
Happen the same thing to me but with wolfbreaks rom... some people told me to re-flash the rom but it didnt work. The funny thing is the the sd card will work on any other device, and any other sd card will work on the phone... havent try re-formatting the card cauze i dont have the adapter but it should work
Sent from my X10i using XDA App
Click to expand...
Click to collapse
you might want to get an adapter. A while back i tried setting up a sd-ext partition on a 4gig card and long story short the only way i was able to run a format that gave me back the 4gigs was throwing it into an adapter
Had the same thing when I updated with stock-2.3.3.... At the time I had it partitioned in 2 partitions...
I connected the phone then with my pc, and there it was, alive and well.... So I backed up the entire card, that is, the first partition, where all my data were; I powered off the phone, took it out, found a adapter, deleted the 2nd partition with Partition Wizard Home Edition Minitool, made the sd-card 1 partition only, formatted that partition, and then I copied all my backed-up data back to the card
Then I put the card back in the phone, booted and voila: the card was recognized again by 2.3.3....! and now it functions ok!
Hope this helps, greetz, good luck,
kwarkje
J!K said:
Happen the same thing to me but with wolfbreaks rom... some people told me to re-flash the rom but it didnt work. The funny thing is the the sd card will work on any other device, and any other sd card will work on the phone... havent try re-formatting the card cauze i dont have the adapter but it should work
Sent from my X10i using XDA App
Click to expand...
Click to collapse
formatting did not help
Anything new on this?
for me it is a little different. The card that came with the phone works fine with the GB update, the thing is that I got another phone, this one came with a 4 Gb card so I took the one in the x10 with all my pics and put it in my new phone and put the other new card in the x10 but it doesn't recognize it...
I've tried with 2 different cards, in xRec i can read it, back up, etc, but once in android its like there's nothing there. Tried formatting it with no results....
What could it be that it reads the original x10 card and no other?
Ive got no idea, but its annoying. Im gonna have to go back to 2.1 which sucks.
We need to some how figure out whats causing this. Ive tried everything.
2.3 seems to be the problem.
brent0r said:
Ive got no idea, but its annoying. Im gonna have to go back to 2.1 which sucks.
We need to some how figure out whats causing this. Ive tried everything.
2.3 seems to be the problem.
Click to expand...
Click to collapse
I have 2.3 and the card that originally came with the phone (16Gb SDHT) works fine, the thing is that it doesn't read any other card.
brent0r said:
Ive got no idea, but its annoying. Im gonna have to go back to 2.1 which sucks.
We need to some how figure out whats causing this. Ive tried everything.
2.3 seems to be the problem.
Click to expand...
Click to collapse
Same issue no clue what to do
Today i found a workarround using DISKPART (6 years later hehe)
Note that this will wipe your storage card so BACKUP !!
Hold [Win + R] and type in : diskpart (or launch cmd as admin and types: diskpart )
Every lines should be followed by enter key.
list disk
select disk *
(" * " is the number of your drive. be carefull do not choice your hard drive number which is commonly 0)
clean
create partition primary
assign
format fs fat quick
exit
Tested and work fine on windows 8 (but should work on 7, 8.1, 10)
Thanks Hope i help even 6 years later !! cheers
Ok so before you all try to get on my case I know now I am suppose to install these roms from the internal sd.
problem is I tried to installed CM7 because I hate stock roms. I am not new to flashing since I have done it on the g2x, milestone 2, x8, transformer prime but this is the first to only allow me to install from internal sd
so anwyays I tried with no success. I wiped all and left my phone on over night maybe thinking it will take some time.
So at this moment I am charging the battery using the macguver method and also I think i need clockwork recovery 5 something something
right now I have version 4.0.14
So my main question is how do i send the rom i want to the internal sd and or is there a rom that I can install from any sd card?
just want to boot up, get my paid version of cwm, get cm7 on and have a wonderful time playing with this phone!
thanks!
jetbruceli said:
Ok so before you all try to get on my case I know now I am suppose to install these roms from the internal sd.
problem is I tried to installed CM7 because I hate stock roms. I am not new to flashing since I have done it on the g2x, milestone 2, x8, transformer prime but this is the first to only allow me to install from internal sd
so anwyays I tried with no success. I wiped all and left my phone on over night maybe thinking it will take some time.
So at this moment I am charging the battery using the macguver method and also I think i need clockwork recovery 5 something something
right now I have version 4.0.14
So my main question is how do i send the rom i want to the internal sd and or is there a rom that I can install from any sd card?
just want to boot up, get my paid version of cwm, get cm7 on and have a wonderful time playing with this phone!
thanks!
Click to expand...
Click to collapse
Flash recovery-atrix5.img, clear davlik-cache, cleardata/factory reset, then reboot system
Hey I fixed it! I let the battery charge for like 30 min on the macguver way and then I used the auto unlocked v4.2 and then, I downloaded cwm 5.020 and renamed the same as what the auto unlocker had which was like 4.9 something, open auto unlocker and selected flash cwm.
Then I wiped data and cache. Installed cm7 from ext sd. Wiped cache again. Rebooted and now it's perfect.
Would have wrote and Better response but I am on a phone!
so I was in the process of installing JB on my gs2, backed up my device, everything was fine. until I factory resetted before flashing CM10, now I have no software on my device and I can't connect it to the computer to put a ROM across. so I went searching and found this
http://forum.xda-developers.com/showthread.php?t=1585494
and followed the instructions, but my computer won't install the drivers. I have also played around in device manager with this. So I resorted to an old 2gb ext sd card I had lying around thinking I would put CM10 on that, but the zip file being 155mb, doesn't want to install on a 2GB sd card. would my phone have recognised it any way? I have also tried droid explorer but I am in way over my head with that.
what do I do please? this has been the past 4 hours of my night and I'm running out of options.
Sultan89 said:
so I was in the process of installing JB on my gs2, backed up my device, everything was fine. until I factory resetted before flashing CM10, now I have no software on my device and I can't connect it to the computer to put a ROM across. so I went searching and found this
http://forum.xda-developers.com/showthread.php?t=1585494
and followed the instructions, but my computer won't install the drivers. I have also played around in device manager with this. So I resorted to an old 2gb ext sd card I had lying around thinking I would put CM10 on that, but the zip file being 155mb, doesn't want to install on a 2GB sd card. would my phone have recognised it any way? I have also tried droid explorer but I am in way over my head with that.
what do I do please? this has been the past 4 hours of my night and I'm running out of options.
Click to expand...
Click to collapse
EDIT******
so I simply, out of curiousity, restored the backup I did though CWM and it worked! *facepalm* but I thought it would have deleted it all off the memory since I did a factory reset? but anyway, it's working and I'm putting CM10 and GAPPS on now and then going to flash first this time!!
Sultan89 said:
EDIT******
so I simply, out of curiousity, restored the backup I did though CWM and it worked! *facepalm* but I thought it would have deleted it all off the memory since I did a factory reset? but anyway, it's working and I'm putting CM10 and GAPPS on now and then going to flash first this time!!
Click to expand...
Click to collapse
Wipe Data / factory reset doesn't format your internal SD card
Hi guys,
I can't work out why but when I go to wipe all settings then install custom rom from zip file in cmw recovery, it completes normally but after the reboot it just stays on the android bot. I went back into recovery and managed the phone through usb to my PC & saw that in the phone storage there was nothing where there is obviously supposed to be boot files. I have installed this custom rom before & it has been no problem. I also have tried a few other roms (all that i've tried before & they all work) and the same thing happens. I have found one rom that worked strangley and when I manged the phone on my PC i saw that it has placed the boot files on the sd card (not the phone storage).
how can i fix this.
i am very new to rooting so please no complicated talk
can someone not help? this is a big issue.
ill try and explain the problem in more detail below...
i have been messing with my phone lately using CMW TOUCH to wipe my data then install rom from zip. everything was going great until now.
i want to install a rom (that i have installed before.so i know its compatible with my phone), i go through tge same procedure of wiping data then installing from zip.all goes the way it should with it telling me its installing from zip, after a while it tells me to reboot the phone. when i do all that happens is it stay on the green android bot for 1 min then reboots. i went into CMW TOUCH to connect phone to pc & found out that it installed nothing, nothing on the phone storage and on the sd card except the custom rom.
i have tried this with few other roms all with the same results.
NOW...
ive managed to find a rom that will install so it is functional all except recently after a reboot it has stopped detecting the sim，weird.
i connected the phone to my pc to find that all boot files are stored on the sd card not phone storage like it used to.
i had an idea that i will try later today and that is to move the custom rom over to the phone storage from the sd card. remove the sd card during install. maybe that will force the install to use the phone storage for the boot files
will let you know the outcome
jamos
i have just tried to install the rom with the sdcard removed from phone & the same thing happened. even though during the installation it tells me that it is formatting system then installing it installs nothing to the phone storage.
Please please help me, I know it sounds pathetic but im nearly in tears due to how massive an impact this is having on my life!! :'(
Im willing to genuinely pay £10 via paypal to anyone who can help me fix my phone, I promise.
My phone is an LG Gt540.
I bought it 2months ago new on stock rom.
I managed to workout how to root it, and then upgraded its rom a few times over the next few days.
I eventually reached CM 4.2.1 rom, which is the highest available and worked well.
The phone has only 133mb internal space though, and so I needed something to increase the storage (using my SD card's space).
And so after many days of trying stuff I managed to find Mounts2sd.
I partitioned my SD card correctly (using mini partition wizard), and mounts2sd was working fine.
However 1 app didn't work, and so like an idiot I decided to re-flash the entire rom, wipe the sd-card, and try to restart from fresh.
However I endedup formatting; the SDcard, The SD ext, the System, and formatting everything in the menu in recovery.
The phoned bricked and wouldn't turn on.
But I managed to put my SD card in my laptop, have my laptop detect it as a 'device', and so was able to place the ROM file onto the SD card that way.
I then re-booted into recovery, and re-installed the rom.
I thought id fixed the phone, but clearly I hadn't.
And for the last 2weeks since, everytime I try to re-install mounts2sd, it just totally screws up and freezes up the phone.
I partition the SD card correctly each time, however when checking it in recovery it says SD-ext wasn't ever mounting (error mounting SD-ext) was the exact message.
I then tried to re-install a lower level rom (2.3.4 I think it is) onto the phone,
to then re-install CM 4.2.1 afterwards hoping that that would fix it all,
however the phone now wont detect the SD card at all!! :'(
The only way I could access the SD card normally is put it in the phone, plug in usb cable, it wont ever detect the SD card as a folder on my laptop like C: or D:, but if I use Mobile2go software from wondershare I was able to connect to the phone and access the SD card from there, and transfer files onto it that way.
However I now cannot do that, since when I try the phone will turn on but has error msg flashup every second saying something like keyboard has stopped working, and so it wont load the Mobile2go software, and so I cant connect to the SD card to put the 4.2.1 rom onto it.
I have tried placing the SD card into the laptop through the side-slot thing, and can access it via mini-partition wizard when I do that.
However the SD card is not being detected at all when I click on My Computer, and so I cannot place any files onto it! :'(
I seriously am so close to crying now, this has already had me in tears, as its so upsetting!
Please please can someone help me.
To summarise the things I need to be able to do (in order I guess) are-
1. Find a way of getting my phone to recognise and mount the SD card.
2. Find a way of getting my phone/laptop to detect the SD card and allow files (CM 4.2.1 rom) to be placed onto it so I can install that back onto my phone.
3. Find a way of being able to get the SD-ext to be recognised and detected as being mounted by the phone so that I can use Mounts2sd.
If anyone can help me do all those 3 things I will be so truly grateful and will happily pay £10 to you via paypal as a sign of my gratitude.
As this is just distressing and upsetting me so much.
Thankyou
Jessica
Hi,
I thing problems with SD card is a system bug, LG Swift its too old, android 4.2.1 on this phone working but it isnt for dialy use, Now try to flash stock ROM using kdz. Then install aosp by Miroslav_mm (2.3.7) its the best ROM for this phone and everything should working fine
KuaQ said:
Hi,
I thing problems with SD card is a system bug, LG Swift its too old, android 4.2.1 on this phone working but it isnt for dialy use, Now try to flash stock ROM using kdz. Then install aosp by Miroslav_mm (2.3.7) its the best ROM for this phone and everything should working fine
Click to expand...
Click to collapse
Hello and thankyou for your reply.
How exactly do I use 'kdz' to flash back to the 1.6 stock rom though please?
As I don't know any of these technical terms at all.
Anyone have their efs folder contents completely disappear?
This happened to me with my Sprint galaxy S 5 and I get a pop up saying the device is in " Factory Mode " and I need to switch it to user for it to work properly. The phone will boot with a stock recovery only but is useless due to the Factory Mode, it disables WiFi and causes numerous other issues .
Would greatly appreciate any input on this. It is all over the internet but nothing but no legitimate fixes after 30+ hours of research
Look at LG Swift GT 540 forum on xda, there are all tutorials, Now I cant post link for it bu google it "LG gt540 xda"
'
edit
lg-gt540-optimus forum
KuaQ said:
Look at LG Swift GT 540 forum on xda, there are all tutorials, Now I cant post link for it bu google it "LG gt540 xda"
'
edit
lg-gt540-optimus forum
Click to expand...
Click to collapse
I tried using KDZ updater to re-flash the stock rom, however all it did is totally break my phone completely so now its totally unusable!!!!!! :'(
I followed every step of the method as written here-
http://forums.androidcentral.com/op...guide-unbrick-upgrade-optimus-v-easy-kdz.html
However it just mucked my phone up and went to a black screen saying loads text, starting with-
Arm11 is crashed!!
Linux kernel panic
Please can someone help me as im so close to just smashing this stupid piece of crap on the floor, and am so upset that the KDZ has broken my phone!!!!