Related
Just installed CM7 from Rom Manager and I have no service. I tried turning on airplane mode and now its stuck in Airplane mode! Pulled battery and SIM, but still nothing.
Did you install the correct radio to correspond with the build of CM7 you installed?
Sent from my HTC Thunderbolt
JBO1018 said:
Did you install the correct radio to correspond with the build of CM7 you installed?
Sent from my HTC Thunderbolt
Click to expand...
Click to collapse
I guess not. How do I know what radio to install and how? Do I install new radio before CM7? TIA
Can I flash A radio with CM7 already installed?
Hurlee555 said:
Can I flash A radio with CM7 already installed?
Click to expand...
Click to collapse
Yes but it's flashed via bootloader.
See http://forum.xda-developers.com/showpost.php?p=15765065&postcount=8
That includes a link to the OTA mr2 thread also
I am having a similar issue
After doing a backup of the stock rom and installing CM7 I had service but very little compared to the stock rom & radio that got full service in the exact same location. I tried to install the radio for 4g and followed those instructions but then it said my sim wasnt installed. I wiped again including cach and reinstalled CM7. I had to use the above link to get the radio somewhat working again but the service still sucks.
is there another radio out there that will work better?
sometimes when i install a AOSP ROM it'll show no service to. although after rebooting, then it works.
I tried rebooting over and over, never came back untill i pushed the above radio in from hboot. It still shows nearly no service although it does have some. I had the same problem with my inspire 4g untill i found the right radio that worked perfect.
I went across town to the area I get the best service and it still only shows 2 bars max
Im having the most annoying problems with my photon
all used to work well, signal bars were great.
then one day i had a fail to boot message, so i flashed this SBF
http://forum.xda-developers.com/showthread.php?t=1202666
And nothings been the same. It seems my radio/baseband is messed up
I have it set to GSM Only as usual
but every now and then it just loses signal ( i think when it switches towers) and wont come back till i reset it. and other times itll switch to 'Automatic' and think its a CDMA phone.
And the most annoying part is most of the time ill have 'signal' but little do i know no text messages are getting to me. and no phone calls. and if i try a phone call it hangs up a second in. These problems are all intermittent, itll suddenly just work after time, then stop after time. I thought it was my SIM Card but all is functional 100% in a different phone. I hope i dont have a sudden hardware problem in the phone itself.
I tried flashing to old SBFs, factory resetting nothing works
Ofcourse I skip the handset activation at the beginning as im in canada (GSM) and i cant seem to 'factory reset' the radio or use any of those codes because im in Canada and it asks for a passcode that i dont have
if ANYONE knows nething i can do pelase help, because its looking like i have to ditch the photon
I flashed my phone with that too, but no network problem after that.
I guess you have tried already to flash again. I'm also on gsm only.
Sent from my MB855 using Tapatalk
im thinking my phones radio is physically crapping out.. ah.
Perhaps that SBF borks GSM usage? Have you tried one of the very first SBF's that have been put out?
i tried 154_5, and 198_6, not sure if they are 'official', but both have this problem.
do u know of any other ones, or of some factory rom
id try those deblurred custom roms, but they have this wierd bug of not showing signal bars with GSM, aka no matter how good my signal is, the signal bar will always show 0 in those roms
I have been searching for crazy for the past week becuase i have had the same issue.
UMTS 3G radio stopped working, but i have not been able to find any 154 sbf files to flash.
I have to keep GSM mode only, and my battery life is terrible. Battery dies after 7 hours with NO usage. The only thing i have not tried, after flashing all kinds of software, is doing a nandroid backup on another Photon and flashing it on my phone. Will try it right now ad report back.
thats a good idea, especially if the nandroid u take is from a STOCK completely untouched Photon, i just wanna go back to how it was when i first got it
let me know how it works out! so we can upload it
i have the 154 sbf if u wanna try it:
http://www.multiupload.com/FNZKNV0T3G
ps: try flashing a rom from the dev section like that 'Home Base' one, i will try later
THANK YOU! I have been trying like crazy to find the 154 one. Im flashing the nandroid backup, but im doing it over the advanced settings, sine the /boot folder is giving me an error while checking "MD5 sums". It says error while flashing boot image. All other folders restore ok. I´ll post back.
ps. I´ve flashed HomeBase and Alien rom and apparently they do not touch the basebands.
considering that sbf that broke it for me is an official sprint update, it means sprint/motorola messed it up, knowingly or unknowingly, should we make it clear to them (to matt on those moto forums). not many users probably use gsm w sprint/photon so the problem isnt wide spread
i think the one that was working for me was soemthing even before 154, i cant remember if i updated my photon once, 194 is the third OTA right?
Im not very sure, but i work for Sprint, so i´ll check it out tomorrow and let you know.
Anyways, my friend with the Photon, the one i used for a nandroid backup does not have any issues connecting to 3G Gsm networks. It is very odd indeed.
[Edit] My friend´s Photon and mine do not have the same baseband version after the nandroid backup, so i guess it doesnt touch it. We need to figure out a way to get the sbf for the baseband,
whats ur baseband version?
ill check mine
if u work for sprint thats a bonus, dig around tomorrow!
my baseband is n_01.28.05s.fk i am currently doing an OTA update that has been ongoing for a week. im still only at 23%. so there may be a newer version.
iLLa said:
my baseband is n_01.28.05s.fk i am currently doing an OTA update that has been ongoing for a week. im still only at 23%. so there may be a newer version.
Click to expand...
Click to collapse
Don't know if it helps at all, But I'm on CDMA and my baseband version is the same. n_01.28.05s.fk
I'm on GSM/UMTS in Italy and my baseband version is n_01.28.07R with update 45.3.6 and is ok
I have a quick question because I've run into a problem I can't seem to fix.
First, so everyone knows what I'm dealing with:
Phone: i717
Changes: Rooted (Shows super user access), CWM v5.5.0.4, Unlocked (Tested)
Rom: Stock AT&T Rom
Sim Card: Works in a T-mo branded Exhibit II 4G.
I flashed a radio (tried KID, 0331122 from the radio thread in the dev section, and reflashed the original AT&T radio).Even w/ the original radio installed, it cannot seem my T-Mo sim now.
Do I need to flash a new Rom or what? Wipe data to factory reset?
I would rather not change anything w/o asking since flashing radios seems to be a straight forward thing that most ppl have done w/o touching the rom.
Thanks ahead of time.
Mine worked with a rooted stock rom at first it didnt see the sim then i tried searching the network under wireless and networks it took a few minutes but then it came up.
Sent from my SAMSUNG-SGH-I717 using xda premium
don't forget if you are running an ICS based ROM you need an ICS based Radio/modem.
EDIT: i see you're running the original GB rom so you need the GB radio.
give it a few minutes to find a signal or go to settings/mobile networks/network operators. choose manual. then let it search a few minutes. then select t-mobile.
I find the Blaze 4G radio worked best for me, but depending on your area, your results may differ. try em all.
You guys are insanely fast.
I'm currently on the stock radio & I'm still getting the same message after letting the sim sit in the phone for 9 minutes (yes, I watched the clock, lol):
Insert SIM card to access network services
Click to expand...
Click to collapse
Where should I go from here?
Edit: Is the answer flashing another rom? Maybe something has become corrupt? I don't see how as I've read & re-read walk thrus for doing this to make sure.
I've done a little more reading. Flashing the beta ICS rom flashes to the old AT&T modem.
Would this be the best bet?
Edit: After looking through the "about" phone...
I'm on 4.0.3
Baseband: Unknown............. that's really bad.
Edit 2:
After reading, I needed to back up the EFS. No where is this stated anywhere, unfortunately. That contains IMEI and everything else.
Edit:
So, after reading MORE, the IMEI number is on a sticker behind the battery, along w/ the S/N.
Huh? Efs? I dont even know what that is nevermind backing it up. Goto clockworkmod and flash the radio.zip and reboot. Thats all there is to it.
Sent from my SAMSUNG-SGH-I717 using XDA
madman604 said:
Huh? Efs? I dont even know what that is nevermind backing it up. Goto clockworkmod and flash the radio.zip and reboot. Thats all there is to it.
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
If you look up EMEI number related to flashing the radio, there's a lot of hits.
XDA has a thread on it here: http://forum.xda-developers.com/showthread.php?t=1352371
I'm quite shocked it's not mentioned everywhere as this happens to people now and again.
I have my IMEI number, i just don't know how to input it into the phone.
As for flashing the radio, I've flashed 2, then back to the original. To no avail.
Sorry never had anything like that. I would almost odin back to stock and start over. You dont need root for the sim to work on calls and edge with tmobile.
Sent from my SAMSUNG-SGH-I717 using xda premium
If you're baseband is unknown don't worry just flash a stock at&t modem and it should go back to normal. Your imei is under a different menu in about phone..the status one.
Also its no ones responsibility to tell you that modifying your phone may break it.
Sent from my SAMSUNG-SGH-I727 using xda premium
jamesd86 said:
If you're baseband is unknown don't worry just flash a stock at&t modem and it should go back to normal. Your imei is under a different menu in about phone..the status one.
Also its no ones responsibility to tell you that modifying your phone may break it.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I did flash back to the stock AT&T baseband as stated in the original post.
If I go to About Phone, the Baseband Version is unknown.
If I go to Status, the following are listed as
Network: Unknown
Mobile Network: Unknown
Service State: Out of service
Mobile Network State: Disconnected
IMEI: Unknown
IMEI SV: Unknown
I've backed up the EFS that I have no just so it doesn't degrade further. I'll try to flash again and see, but I still think the EFS is borked.
I'll see what I can, but I think I'll the EFS is borked beyond flashing it to normal.
My point about the EFS back up is that most ppl here don't seem to know what it is. It shouldn't be that foreign of a topic since flashing a radio is obviously problematic for some. I've seen other posts concerning no IMEI after flashing radios on forums other than XDA. It's odd that it's not mentioned as a sticky everywhere.
Backing up EFS would solve a lot of head aches from unlocking / radio flashing woes. I'm hoping this info will save a few people a lot of time and money.
After more digging, I came across this thread:
http://forum.xda-developers.com/showthread.php?t=1646326
Synopsis: Basically, he followed the same guide I did. The only difference is that I flashed the radio while using a stock AT&T rom. Once he flashed back to GB (saurom), he gained back his baseband / IMEI.
This is what I cannot figure out:
CWM will see and flash any radio file I push to my note. If I push a stock AT&T rom, it won't see it. If I put the rom in it's own folder, it seems the rom, but states there's no files.
Is CWM corrupted? Why would it only read firmware to flash radios, but not android roms? Should I just go back and install CWM?
I've searched all over & used google, but I can't find a thread discussing this.
Fixed.
This problem has nothing to do with any of the radios corrupting the EFS folder. Albeit, it's always a good idea to back it up.
Flashing back to AT&Ts stock rom (2.3.6 or 4.0.3) never fix the issue. You will always be stuck w/o a radio, at least from what I've seen. Even flashing back to the stock radio fails. I don't know if it changes the EFS, but AT&T's rom does not like it and shows no IMEI & a bogus SN .
I had to go back, flash to saurom and a compatible GB (or beta T-mobile) radio to get te work fine. ICS radios work fine on ICS.
Saurom and GB radios dont work in my i 717 trying to connect to wind. I got a CM 9 ICS build and ive tired a bunch of radios. they all failed. i keep getting no sim errors. I can see the operator but when i select it it times out and says it cannot connect to the network at this time. it also says interset sim. Im positive it is unlocked.
Modems(radios) or basebands should have nothing to do with whatever rom you are running. Whether they are GB, ICS, or JB modems, they should all work to a degree, at least for phone call ability. I have flashed many different radios trying to get the best function of my att note on t-mo. The best I got was using the Blaze modem. That got me 3g hspa.
The worst will be just giving you edge speed. My note is unlocked and has been on JB running blaze ICS modem working fine. Maybe you need to start over, evaluate what you have, and go from there. There are great threads on att over t-mobile. Good luck.
I picked my rom, and started flashing 5 or 6 radios, and found what one worked best on t-mo.
Presently, I have switched back to att- sort of- straight talk. I'm not thrilled with the speeds. No higher than 4 mbps DL, and 1-1.5 UL. Thinking about going back to t-mo and dealing with the slow UL speeds. I'm on an ICS rom with the ucle6 modem.
Also, flashing a rom does not change your modem. You have to physically reflash the modem you want. Some modems show up as unknown under the baseband. Blaze is one of them.
Another thought- sometimes a reboot will get your sim recognized by your phone.
sico987 said:
Saurom and GB radios dont work in my i 717 trying to connect to wind. I got a CM 9 ICS build and ive tired a bunch of radios. they all failed. i keep getting no sim errors. I can see the operator but when i select it it times out and says it cannot connect to the network at this time. it also says interset sim. Im positive it is unlocked.
Click to expand...
Click to collapse
This is yet another case of the "no sim" bug ....
Damn I wish we could find the answer to this issue, but none exist .....and for some users the return to complete stock even fails to recover service ..
g
Really what an incredible unlucky glitch.I got my note for only 360CDN good condition but missing the stylus, even still it was a good buy. I'm on Wind mobile, T-mobile here in Canada. I even gave it to somebody who's done a bunch and they ran into the no sim problem. I guess I'll be going back to my HTC HD2 and sell the note .
---------- Post added at 11:48 PM ---------- Previous post was at 11:44 PM ----------
So just to confirm I have followed the process correctly over 20 times and no matter which cm9 cm10 based rom and any ics or gb based radio will allow connection or recognize the sim to the 1700 aws network. With a cm9 based rom I can see my network, but it will not allow connection like the phone is locked, even though i have unlocked and tested the phone on other networks.
same here
Yes, I have the same 'No SIM' issue with a working WIND SIM. I've tried everything, multiple Radios, multiple ROMs. Very strange problem. I wish we had the tools that the SGSIII has for dumping and restoring the NV ram. Even stranger, I do have a the correct IMEI number in Phone, About. I have a feeling it's something to do with how the phones were carrier unlocked.
http://forum.xda-developers.com/showthread.php?t=1804117
I have made a backup of the EFS folder with EFS Pro. I tried restoring the NV ram from .bak but there was none found.
http://forum.xda-developers.com/showthread.php?t=1308546
tweebs said:
Yes, I have the same 'No SIM' issue with a working WIND SIM. I've tried everything, multiple Radios, multiple ROMs. Very strange problem. I wish we had the tools that the SGSIII has for dumping and restoring the NV ram. Even stranger, I do have a the correct IMEI number in Phone, About. I have a feeling it's something to do with how the phones were carrier unlocked.
http://forum.xda-developers.com/showthread.php?t=1804117
I have made a backup of the EFS folder with EFS Pro. I tried restoring the NV ram from .bak but there was none found.
http://forum.xda-developers.com/showthread.php?t=1308546
Click to expand...
Click to collapse
It has nothing to do with your unlock. If you've followed the steps and are still having no sim issue you may have to get a new 32k sim card from wind the older ones won't connect in a phone with lte
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Had to replace the TMo SIM card with a newer one today. Solved the problem of "No SIM".
I know this is old
I have the same problem with "NO SIM." One day i flashed so many things to my phone and one time i turned it on i got ATT on the top right corner and everything was good. I made some phone calls and texts and even browsed the web. I restarted the phone to check if it was just a fluke and it was. Ever since then i cannot get it to read my phone, but i know for sure the hardware works.
I can't post to the dev forum, so maybe someone over here can help:
I tried the PA ROM, because I really love the hybrid mode. The ROM has worked fine and looks great, but whatever version I flash, the mobile network, both data and phone, simply doesn't work.
It briefly connects to my provider (drei.at) and immediately disconnects, no matter whether I have data connection enabled or not.
Have tried this with all available versions of PA and did the usual routine: wipe, format system, wipe data. I even went totally back to a stock ROM, tried various modems, the current one being XXDLH9, which works just fine on [email protected] 0.6 ROM.
Had the same problem with Omega, FoxHound, and god knows what other ROMs I tried. No matter what, the only JB ROM actually working is [email protected] 0.6, that's it.
Is this a known phenomenon or have I overlooked something obvious?
The phone used to be a branded and simlocked Austrian T-Mobile, but ever since it has been debranded and SIM unlocked.
Any ideas?
All i can suggest is your apn settings?
Can try Offline SIM APN Database (get on Google Play) to insert the correct apn settings.
alchemist83 said:
All i can suggest is your apn settings?
Can try Offline SIM APN Database (get on Google Play) to insert the correct apn settings.
Click to expand...
Click to collapse
Thank you for the suggestion. The APN settings on a fresh install, all wiped, are correct and the same as in a working setup.
Any other ideas? Am I really the only one with that problem?
Modem tried APN correct .
Suggest next step is factory reset ..
Step after that is to install an official stock rom .
Others who may have a problem post in the roms thread .
jje
JJEgan said:
Modem tried APN correct .
Suggest next step is factory reset ..
Step after that is to install an official stock rom .
Others who may have a problem post in the roms thread .
jje
Click to expand...
Click to collapse
Did a factory reset, totally clean install with everything wiped.
Also, did a clean wipe and installed official stock ROM. Lost root, started from scratch and still didn't work.
I'd love to post in the ROM forums, but haven't yet posted my mandatory 10 postings.. Maybe this thread helps me to reach that limit
DF5JT said:
Did a factory reset, totally clean install with everything wiped.
Also, did a clean wipe and installed official stock ROM. Lost root, started from scratch and still didn't work.
I'd love to post in the ROM forums, but haven't yet posted my mandatory 10 postings.. Maybe this thread helps me to reach that limit
Click to expand...
Click to collapse
Possible hardware problem then .
jje
JJEgan said:
Possible hardware problem then .
jje
Click to expand...
Click to collapse
Very unlikely since it works on stock ROMs and [email protected] 0.6.
Uhm you just said that it still did not work on Stock?
What error message does the deviche present in *#4636#* -> phone info under Gprs?
Sent from my GT-I9300 using xda premium
d4fseeker said:
Uhm you just said that it still did not work on Stock?
What error message does the deviche present in *#4636#* -> phone info under Gprs?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
No, that's not what I said. Stock ROMs work just fine; I actually just flashed the latest leak (DLI5) and had no problems with the network. The problem hasn't changed, so it's what I wrote in the OP: Only JB to work ist latest leak and [email protected] 0.6. All others can be installed but have not network connection other than WiFi.
DF5JT said:
I can't post to the dev forum, so maybe someone over here can help:
I tried the PA ROM, because I really love the hybrid mode. The ROM has worked fine and looks great, but whatever version I flash, the mobile network, both data and phone, simply doesn't work.
It briefly connects to my provider (drei.at) and immediately disconnects, no matter whether I have data connection enabled or not.
Have tried this with all available versions of PA and did the usual routine: wipe, format system, wipe data. I even went totally back to a stock ROM, tried various modems, the current one being XXDLH9, which works just fine on [email protected] 0.6 ROM.
Had the same problem with Omega, FoxHound, and god knows what other ROMs I tried. No matter what, the only JB ROM actually working is [email protected] 0.6, that's it.
Is this a known phenomenon or have I overlooked something obvious?
The phone used to be a branded and simlocked Austrian T-Mobile, but ever since it has been debranded and SIM unlocked.
Any ideas?
Click to expand...
Click to collapse
Have you tried flashing a new baseband? i had the same problem, when flashing the franco. Kernel..
or, go back stock, then reflash the desired ROM
EDIT: If it helps, I speak/write fluent german ('Cause I live in germany ^^)
familyguy59 said:
Have you tried flashing a new baseband? i had the same problem, when flashing the franco. Kernel..
or, go back stock, then reflash the desired ROM
Click to expand...
Click to collapse
Thanks for trying to help.
Yes, I have been playing around with all kinds of basebands, trying to flash modems etc. but that does not seem to be the reason for it. I have had different modems working and the very same modems simply did not work with PA at all. Best example ist yesterday's leak DLI5 which I flashed and had a virgin like system working just fine with my network. I then flashed the PA ROM, which then had the same baseband as the latest stock ROM, but, alas, same story: No network.
The weird thing is the brief connect it always shows in the status bar. It lasts roughly 4-5 seconds and then disconnects again, only showing the empty network status display.
It really sucks, because I find the idea of hybrid ROMs really appealing, in fact, this seems to me as a truly superior way of making use of the 720p display.
Need to try logcat next to see whether the connect/disconnect somehow can be monitored from there. Will report on that.
DF5JT said:
I can't post to the dev forum, so maybe someone over here can help:
I tried the PA ROM, because I really love the hybrid mode. The ROM has worked fine and looks great, but whatever version I flash, the mobile network, both data and phone, simply doesn't work.
It briefly connects to my provider (drei.at) and immediately disconnects, no matter whether I have data connection enabled or not.
Have tried this with all available versions of PA and did the usual routine: wipe, format system, wipe data. I even went totally back to a stock ROM, tried various modems, the current one being XXDLH9, which works just fine on [email protected] 0.6 ROM.
Had the same problem with Omega, FoxHound, and god knows what other ROMs I tried. No matter what, the only JB ROM actually working is [email protected] 0.6, that's it.
Is this a known phenomenon or have I overlooked something obvious?
The phone used to be a branded and simlocked Austrian T-Mobile, but ever since it has been debranded and SIM unlocked.
Any ideas?
Click to expand...
Click to collapse
Bump.
Nearly the same prob to me! I loose data if I change my location, also provider "3" in Austria! Stock is working, CM10 nightly also. I tried different Modems tomorrow the ODIN Leak.
Andi
me too
no data network after flash on two diffrent galaxy s2's
kaos7 said:
no data network after flash on two diffrent galaxy s2's
Click to expand...
Click to collapse
I was having the same issue, I pulled the SIM and wiped it down, blew off the contactors, seems to of solved the problem for the time being.
WiFi works, Mobile Networks do not
2Fast 2Low Customs said:
I was having the same issue, I pulled the SIM and wiped it down, blew off the contactors, seems to of solved the problem for the time being.
Click to expand...
Click to collapse
I just installed ParanoidAndroid. I'm kind of a noob to all of this.
I understand some, but not all.
My mobile networks are not working.
I don't get any notification at the top of the screen either saying I'm on a mobile network.
I've messed around with the APN settings. It seems that every now and then it'll connect for a brief moment, but I can't really do anything unless I'm connected to WiFi.
Any help would be appreciated.
I came from a stock phone rooted.
Installed this and now I'm here.
Please HELP!!
Had this problem with stock roms..
The network is fine but doesn't exchange data correctly.. AOSP worked fine for me.. PA= flawless
BHARGAV33 said:
Had this problem with stock roms..
The network is fine but doesn't exchange data correctly.. AOSP worked fine for me.. PA= flawless
Click to expand...
Click to collapse
Turns out I just had crappy reception at home.
I wanted to get 3+ but something got in the way and had to go with the 2.+
Sorry for not understanding, but what is AOSP? I see that, but I don't get what is what.
ASOP = Android Open Source Project.. They are best but not that much good at battery
Spend some time on xda and Google your doubts.. You'll surely understand everything from android
ive been having same issue Network not availiable and also where i normally have 4g service i know only get 3g.Ive flashed several different roms still same issue.Could this be glitch in vzw AWS system?Is there any other radios we can flash? I notice that it take a really long time to do network hand offs too. Like I am talking a few minutes to switch from 4g to 3g or 3g to 4g. Signal bars show full, but there is not data and then they go gray and then it takes a few mins and they go blue.
basically im having the same issue as post #2 in this thread.
http://forum.xda-developers.com/showthread.php?t=2332500
It also sounds similar to this thread too.
http://forum.xda-developers.com/showthread.php?t=2292982&highlight=signal+issue
Is there something that can be done to test my radios, access point apns, etc.? I am on liquidsmooth 2.8 and have this problem ever since i got the phone (i bought it and flashed cyanogenmod last week). I also notice that under access points, i dont have anything listed and when trying to add an apn, and hit save, nothing happened
Anyone have any issue similar. I found some threads but they were not any help
Try getting a new SimCard. Those can sometimes go bad when being transferred from phone to phone. They are free anyways too.
im going to try that a little later today. thanks
Got the new sim. No help
dougmod said:
Got the new sim. No help
Click to expand...
Click to collapse
Should I sent you info to go back to stock?
DarkMenace said:
Should I sent you info to go back to stock?
Click to expand...
Click to collapse
Sure. If you think that'll help I would really appreciate it. So you think go back to stock and then reflash to liquid?
dougmod said:
Sure. If you think that'll help I would really appreciate it. So you think go back to stock and then reflash to liquid?
Click to expand...
Click to collapse
Possibly. Something could have been corrupted in the process. If it still does it on stock go to Verizon and complain.
i flashed back to stock and my download speed is 800 and upload is 85. it shows I have a 4g signal and the system status shows that my signal is -102 or -98.
anyone else have any ideas?
So things ive tried:
1. new sim.
2. back to stock touchwiz through odin
3. flash stock modem through odin and stock kernel
4. doing the whole process to root and stuff manually, then installed a customer recovery manually and then flashed a new rom, still no results
are we going to call this hardware failure? or is there any other reset type thing i can do
dougmod said:
anyone else have any ideas?
So things ive tried:
1. new sim.
2. back to stock touchwiz through odin
3. flash stock modem through odin and stock kernel
4. doing the whole process to root and stuff manually, then installed a customer recovery manually and then flashed a new rom, still no results
are we going to call this hardware failure? or is there any other reset type thing i can do
Click to expand...
Click to collapse
Most likely Hardware issue since all the steps have been tried. Unless it's only in your area. Have you tried to go somewhere else on a different tower?
yes i have. my s3 does not have any issues here, so that i why im guessing its the phone