please help me, i will flash my Mozart with DFT- Rom but it shows neither serial nor usb ( see picture). Thanks
Hi,
I think that your problem is due to your bootloader version which is 5.10. To install a DFT rom your bootloader version must not be 4.XX or 5.XX. If you are in that case you have to downgrade your bootloader
Further more, it seems that for the moment it's not possible to downgrade a 5.XX bootloader.
You have to wait for the moment, i'm in the same case of you...
OK, how can I change bootlader if I have no usb connection, that is the problem. Thanks
As far as i know, the only way to downgrade a 5.10 bootloader is by using a gold card with an old ROM version (which as an old bootloaderversion).
You can found some informations here : http://forum.xda-developers.com/showthread.php?t=893152
I am not skilled enough to try this method, if you want to test it i wish you good luck!!
did you install ms mobile conectivity driver?
Sent from my 7 Mozart T8698 using Board Express
ariey said:
did you install ms mobile conectivity driver?
Sent from my 7 Mozart T8698 using Board Express
Click to expand...
Click to collapse
hello, the problem only exists in the bootlader-modus but not in the normal modus. Thanks
albahr said:
please help me, i will flash my Mozart with DFT- Rom but it shows neither serial nor usb ( see picture). Thanks
Click to expand...
Click to collapse
Your main mistake was that you had made the official update to latest mango.
Or you bought the phone already updated by someone.
The latest official software updates bootloader to version 5.10.
This bootloader will not allow you to flash any custom rom (including DFT). Also you cannot downgrade the bootloader version in any way. No GoldCard or whatever will do that.
So - just use only official roms or sell your phone away and buy the new one, but check boot version while buying.
The current state of your phone is "half - brick". You can normally use the phone and you are able to install official rom updates if they appear. But you can not install any custom rom.
Here, open this link and read carefully before you proceed: 18 Branded hTC Roms
* Yeah, ones who replied earlier are true. I wonder, how could you use SPL 5? mine is 1.26 and running Mango..
I've got mine with 5.11 bootlader then I use Goldcard. If I'm not wrong Goldcard is the method which requires y-cable, USB card reader, and microSD.
I'm so lucky I successfully downgraded it from 5.11 to 1.32.
I'm using a custom ROM right now.
So I think it's not true that you can't downgrade 5.xx to lower versions.
Just follow the instructions here at XDA and read it carefully.
It's just a little nervous to do.
Do you have the solution?
Try with this ROM
http://forum.xda-developers.com/showthread.php?t=1413694
using this method
expressions104 said:
If I'm not wrong Goldcard is the method which requires y-cable, USB card reader, and microSD.
I'm so lucky I successfully downgraded it from 5.11 to 1.32.
Click to expand...
Click to collapse
iwans said:
Try with this ROM
http://forum.xda-developers.com/showthread.php?t=1413694
using this method
Click to expand...
Click to collapse
i think this will work only for HTC Europe, if I have an Asian Rom, will this work?
When you turn on you phone at usb-host mode ( turn phone off and hold camera + volume down button and turn phone on. You are going to be in usb-host mode. you can downgrande your spl by using gold card method. You have to remember that, if you phone is ornage france, you have to use older bootlader version orange fr roms. otherwise you are going to have not allow error.
Related
Just got a X01HT after Dec, version is 1.09. After reading all these threads, is it possible to use "DownGrade_SPL.rar" downgrade to 1.04 as I know sim unlock is still not available yet, just want to use chinese rom instead..........
Thks,
hi there,
please reaqd the wiki and the sticky threads on this board, the solutions ar eposted there.
cheers,
Thks, just tried and it successfully downgrade to 1.04......so now I can flash the chinese rom or i need to make it super CID before that??
I have the same case as yours. I tried to flash the rom to HK version but failed, so I installed cestar instead
mj13 said:
i need to make it super CID before that??
Click to expand...
Click to collapse
yes, you are right.
riderhk said:
I have the same case as yours. I tried to flash the rom to HK version but failed, so I installed cestar instead
Click to expand...
Click to collapse
Just tried flash it to HK rom and it worked....
mj13 said:
Just tried flash it to HK rom and it worked....
Click to expand...
Click to collapse
How can you make it? I have downgraded to 1.04. But can not flash the ROM
(Cause the CID. How can you make the CID??)
wiccawaiwai said:
How can you make it? I have downgraded to 1.04. But can not flash the ROM
(Cause the CID. How can you make the CID??)
Click to expand...
Click to collapse
1.04 has a bug. even if you get an error message when you try to burn a rom from another company, do nothing with your device and run the same update again on your pc. you can update the rom this time.
qtotter said:
1.04 has a bug. even if you get an error message when you try to burn a rom from another company, do nothing with your device and run the same update again on your pc. you can update the rom this time.
Click to expand...
Click to collapse
My system hangs when I run the flash program second time, so my x01ht is still in Japanese version
riderhk said:
My system hangs when I run the flash program second time, so my x01ht is still in Japanese version
Click to expand...
Click to collapse
is your bootloader 1.04?
mj13 said:
Thks, just tried and it successfully downgrade to 1.04......so now I can flash the chinese rom or i need to make it super CID before that??
Click to expand...
Click to collapse
Hello mj13,I looked around the posts and I could not find any solutions to downgrade my X01HT shipped after Dec from 1.09 to 1.04.Would you please tell me where did you find it or how to finish it?
And ,since downgraded to 1.04 ,does that mean I can unlock my X01HTto use another SIM card using the v2a version unlocker?
Thank you vey much.
qvik123 said:
Hello mj13,I looked around the posts and I could not find any solutions to downgrade my X01HT shipped after Dec from 1.09 to 1.04.Would you please tell me where did you find it or how to finish it?
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Hermes_Howto_Bootloader104
qvik123 said:
And ,since downgraded to 1.04 ,does that mean I can unlock my X01HTto use another SIM card using the v2a version unlocker?
Click to expand...
Click to collapse
If its pre December 2006 yes, if it's post December 2006 no.
qtotter said:
is your bootloader 1.04?
Click to expand...
Click to collapse
yes, already downgraded to 1.04.
Would you mind try to upgrade the rom again? If it doesn't work, please let us know
Hi,pof!Thank you very much for answering my question on the 1.09 to 1.04 topic.But I still got some questions.In the link you gave me it says I can not downgrade my bootloader unless I go to the IMEI something website and pay some dollars.Is that the only way to downgrade my bootloader?
And you told me even if I downgraded my bootloader,I still can not unlock my phone.That means,if I downgraded,I can burn other language rom (like English)but I can not use other company's SIM card.Am I right?
Sorry to bother you.Hava a good day!
Sorry to post it again after giving you a private message.
qvik123 said:
Is that the only way to downgrade my bootloader?
Click to expand...
Click to collapse
Legally yes, as you have SPL-1.09 now.
qvik123 said:
And you told me even if I downgraded my bootloader,I still can not unlock my phone.That means,if I downgraded,I can burn other language rom (like English)but I can not use other company's SIM card.Am I right?
Click to expand...
Click to collapse
Yes, because softbank 1.14 radio doesn't allow to be upgraded even if you flash another ROM this radio will be kept in your device.
Ok so I have a little problem with the whole 1.09 -> 1.04 thing.
I have been searching for a couple days or so and gathering some information about it, but I don't think that anyone has had my problem yet. I have a pre-Dec. x01ht, and I stupidly upgraded to 1.09 (don't ask why; I'm still kicking myself). So after trying to downgrade with a couple different versions of the 1.04 provided here with no avail, I found the downgrade_spl file that has been floating around. Each time I keep getting the same problems.
When I active sync with my computer and start the downgrade (upgrade?) process i get past the first preliminary check with the phone and when it jumps to the second check, the phone resets into the tri-color screen for about half a second, and then a white upgrade looking screen. after that the phone checks itself and everything says "ok", but it never resyncs with the computer. The computer stays on the screen that would show a progress bar, but after it hangs there it gets an error screen. i also tried doing everything from the boot mode (the tri-color menu), and that also gets an error. when i try from the boot mode, the both of the progress bars start, but before either go anywhere they both the computer screen comes up with an error in the program. it asks me if i want to recover or view the file, and recover also doesnt work.
Has anyone else had this problem, and if so how did you go about solving this dillema?
I am so tempted to try the new 2.1 ROMS but I have not fully understood the rooting process can anyone put me in the direction of a good step by step I know windows inside out but android.....
Just do a search here. I did mine and its dead easy.
im trying the
Rooting the HTC Hero/G2..(success)
method, which did you find ?
RUBBLEDOUBLE said:
Just do a search here. I did mine and its dead easy.
Click to expand...
Click to collapse
I wish it was that easy...still at it after 2 days...or perhaps I am just a nb !
I got to boot into bootloader (holding down 'back' and power), get the message bootloader usb after plugging into PC, but no SDK tools will work or find the device.
If I get any help....it will go a long way
My HTC
T-Mobile G2 Touch (Hero)
Firmware - 1.5
Baseband Version - 63.18.55.06FU_6.35.07.08
Kernel Version - 2.6.27-0078c992 [email protected] #821
Build number - 2.73.110.26 CL#69351 release-keys
Software Version - 1.0.0.A6288
drivers installed?
kendong2 said:
drivers installed?
Click to expand...
Click to collapse
Yup. USB Drivers installed with the SDK
Hi Boss
two thing u have to careful
if you done the upgrade to 2.73.11.26 then you have to follow GOLD CARD method ( see one of the sticky's)
if you still on old version then you can you rooting HTC hero/g2 success method
regards
gugi
i tried
I tried the gold card and got to the ruu install part and it said it was wrong version
skauk said:
I tried the gold card and got to the ruu install part and it said it was wrong version
Click to expand...
Click to collapse
That means your goldcard hasn't been made properly.
It took me 5 or 6 goes, I was reversing the hex string incorrectly by hand - once I did that right, it worked perfectly.
Hi all!
I am currently on Mango 7720 with bootloader 4.5 and so I can't use HSPL.
I read that with an Y-cable it is possible to do it.
I need a stock rom for my mozart, as my firmware rev ends with 111 I need TMO-DE (T-Mobile DE). So this are my planned steps:
1. Connecting PC - SD card - Mozart using Y-cable, flashing it with this rom on the SD card: RUU_Mozart_TMO_DE_1.32.111.01_5.65.09.25_22.45.50_ RELEASE (taken from this thread)
2. Next step will be HSPL my device (thanks to step #1 it's bootloader is below 4.x) following this thread: http://forum.xda-developers.com/showthread.php?t=1195647
3. Now i can flash any custom mozart rom (hopefully).
Any reply if i am correct will be appreciated - the ones pointing to a misthought even more ;-)
Thanks,
UP
with 4.5 I think it's possible without a Y-cable, I didn't use one. I think y-cable is only necessary for 5.XX and higher.
I simply put device in bootloader screen (holding vol down whilst switching on) connected it to my computer and waited for USB to appear on the bottom, finally I flashed an older rom, like your RUU_Mozart_TMO_DE_1.32.111.01_5.65.09.25_22.45.50_ RELEASE
If this works you should have a 1.32 bootloader, you can then install RSLP/HSLP
If you need a Y-cable, it will not let you flash the ROM, as far as I know though this only happens with post 5.XX bootloaders
Hope that answers your question. Obviously make sure you follow the instructions for RSLP and HSLP carefully and fully understand that if something goes wrong (powercut etc) you have effectively bricked your device.
Otherwise best of luck.
EDIT: Obviously if you plan to use the RUU_Mozart_TMO_DE_1.32.111.01_5.65.09.25_22.45.50_ RELEASE, make sure your phone's original rom was TMO_DE (I assume that is T-Mobile Germany) Otherwise you risk bricking your device.
feygor said:
with 4.5 I think it's possible without a Y-cable, I didn't use one. I think y-cable is only necessary for 5.XX and higher.
I simply put device in bootloader screen (holding vol down whilst switching on) connected it to my computer and waited for USB to appear on the bottom, finally I flashed an older rom, like your RUU_Mozart_TMO_DE_1.32.111.01_5.65.09.25_22.45.50_ RELEASE
If this works you should have a 1.32 bootloader, you can then install RSLP/HSLP
If you need a Y-cable, it will not let you flash the ROM, as far as I know though this only happens with post 5.XX bootloaders
Hope that answers your question. Obviously make sure you follow the instructions for RSLP and HSLP carefully and fully understand that if something goes wrong (powercut etc) you have effectively bricked your device.
Otherwise best of luck.
EDIT: Obviously if you plan to use the RUU_Mozart_TMO_DE_1.32.111.01_5.65.09.25_22.45.50_ RELEASE, make sure your phone's original rom was TMO_DE (I assume that is T-Mobile Germany) Otherwise you risk bricking your device.
Click to expand...
Click to collapse
Thanks for your reply!
In the HSPL/RSPL thread i read that it will brick your device when using Mango ROM with 4.xx/5.xx Bootloader.
That's why i intend to use the Y-Cable. I would be lucky if i would'nt have to.
So you think I can directly flash the old NoDo ROM to downgrade the bootloader without the Y-Cable and then install RSPL/HSPL? Wow thanks for this useful information, makes it a lot more easier!
My Firmwarerevision ends in .111 - that's why i think it's TMO DE. Is there any other way to tell this?
Unipac said:
So you think I can directly flash the old NoDo ROM to downgrade the bootloader without the Y-Cable and then install RSPL/HSPL? Wow thanks for this useful information, makes it a lot more easier!
Click to expand...
Click to collapse
That's what I did, as long as it's the same branding it will downgrade your bootloader to the one in the rom.
Unipac said:
My Firmwarerevision ends in .111 - that's why i think it's TMO DE. Is there any other way to tell this?
Click to expand...
Click to collapse
Not sure, I knew mine was Orange UK because I bought it from an Orange store in the UK.
Hi Guys, I just installed what I believe the accompanying Tango firmware for Titan 1 (see attached screen capture). For those who have read my previous thread on debranding AT&T Titan to Euro 2.5 rom, this also confirm that you can easily reflash stock rom on DFT hspl'ed phone using RUU.
To revert to stock rom, I used the TitanAdvancedRUU to flash stock euro rom v2.5 then used the cab sender to update to spl 2.6. At this point, I connected my phone to zune hoping to get an update notice but no joy What I did after this was to force update from 8107 to 8773 using a cab sender (see post from AlvinPhilemon http://forum.xda-developers.com/showthread.php?t=1306415&page=106) The Tango update somehow triggered the firmware update from Zune.
The Zune update took roughly around 20-30mins, when it reboots the phone it was stuck on the htc boot page for about 10mins at this point I manually restarted the phone, and this time around it boot up and completed updated
I haven't noticed any changes that i can tell outright from previous version but i'm hoping that this might rectify stock rom known bugs eg. random reboot, wifi signal etc... on the second thought maybe the display font looks much better /cleaner maybe its just me
Hmmm I see on the first screen that after update you have 4.6 bootloader version (and SPL). I think now you can't install HSPL and I don't know whether you can do downgrade for install HSPL and customROMs.
Budniu said:
Hmmm I see on the first screen that you have after update 4.6 bootloader version (and SPL). I think now you can't install HSPL and I don't know whether you can do downgrade for install HSPL and customROMs.
Click to expand...
Click to collapse
That might be the case I'll report back once I try to reinstall hspl but for the meantime ill try this stock tango with updated firmware
Ok, I wait for info.
Budniu said:
Ok, I wait for info.
Click to expand...
Click to collapse
Budniu said:
Hmmm I see on the first screen that after update you have 4.6 bootloader version (and SPL). I think now you can't install HSPL and I don't know whether you can do downgrade for install HSPL and customROMs.
Click to expand...
Click to collapse
With this new bootloader 4.6, I can confirm that this does not allow direct downgrade of SPL to install HSPL.:crying: ... even gold card method doesn't work. Initially I thought that I will be stuck with this stock rom which is not bad considering that I have an up to date rom and firmware installed... but not as good of having a fully unlocked phone Anyway, I tried re-installing stock Euro rom 2.05 first using RUU, but I got an invalid vendor, so proceeded using goldcard but I got "not allowed" on usb mode and kick back to spl screen. As last resort I tried the stock cingular rom 1.10 using RUU lo and behold it proceeded to complete the flash and I end up with bootloader 1.10 (see screen shot) :laugh: Following this I thought it will be an easy way back to installing DFT spl2.5 and hspl by the same route I've taken before that is to debrand to Euro rom 2.05 using gold card method but strangely it wouldn't allow me, I got "not allowed" thingee after entering to usb mode At this stage I was really worried that maybe my phone was stuffed from whatever thing that was installed from htc bootloader 4.6 or maybe my goldcard is not actually working. So tried flashing cingular rom using gold card method and it did work. I tried few times to flash euro roms (diffferent versions) but without success. I even tried updating to spl 2.6 then flash euro rom to debrand but again failed... so out of desperation I decided to flash DFT spl 2.5 and the most strange thing happened it was installed then I proceeded with hspl this also went through without a glitched and now I am back on CUSTOM ROM!!! whew... for those who are now running custom rom, especially for AT&T Titan phone version, please don't mess up with your phone and try what I just been through... not a nice experience at all, I think its dumb luck that I got back to custom rom:angel:
LOL
Thanks fro sharing m8 ...
New to the board - I hope my first question is not that stupid.
Got a new (European / German, unbranded) Titan yesterday.
Zune updated to 8773, automatically without any force today.
But it wouldn't get the HTC update (I was still on bootloader 2.6.xxx).
So I used the cab sender with the original HTC update (found it on this board) - it worked without any problem and I have the same versions as posted on the pic in the first message (bootloader 4.6.175006.2(140733)).
My question is: Will I be able to receive official Zune updates after that? Or am I stuck to the cab sender for future updates (7.8 & co.)?!
My device is not flashed or changed in any way - just used that HTC update cab...
Couldn't find a quick answer to that...
THANKS ! :fingers-crossed:
lorlando said:
New to the board - I hope my first question is not that stupid.
Got a new (European / German, unbranded) Titan yesterday.
Zune updated to 8773, automatically without any force today.
But it wouldn't get the HTC update (I was still on bootloader 2.6.xxx).
So I used the cab sender with the original HTC update (found it on this board) - it worked without any problem and I have the same versions as posted on the pic in the first message (bootloader 4.6.175006.2(140733)).
My question is: Will I be able to receive official Zune updates after that? Or am I stuck to the cab sender for future updates (7.8 & co.)?!
My device is not flashed or changed in any way - just used that HTC update cab...
Couldn't find a quick answer to that...
THANKS ! :fingers-crossed:
Click to expand...
Click to collapse
Short answer yes, you will still get official (future) updates from Zune. I reckon if you have waited a bit longer, you would have received update notification from Zune but doesn't matter anyway now that you have the updated firmware.
I have an AT&T branded HTC Titan, and aside from the wifi bug, my device generally works as expected. I used the cab sender "force update" method to upgrade to Tango, and again-- everything is pretty solid.
Can I (and should I consider) update the HTC firmware for general device fixes if I have no intention of unlocking the device?
GoodThings2Life said:
I have an AT&T branded HTC Titan, and aside from the wifi bug, my device generally works as expected. I used the cab sender "force update" method to upgrade to Tango, and again-- everything is pretty solid.
Can I (and should I consider) update the HTC firmware for general device fixes if I have no intention of unlocking the device?
Click to expand...
Click to collapse
The available cab htc firmware update is for Euro/International/unbranded Titan, so this will not install on AT&T branded Titan. It will come with error it you try to install the cab.
this is very confused
hello has all, in particular to developers.
of revcente I bought a htc radar (omega) C110e branded MOVISTAR only with English and Spanish with WP7.8. and of course with the bootload 4.x.x. since I am Italian, I would like the Italian language on your phone, but you can not '. then,
I need to figure out if the developers in the near future will be able to pull off the downgrade or another system to go back with SPL.
priologiacomo said:
hello has all, in particular to developers.
of revcente I bought a htc radar (omega) C110e branded MOVISTAR only with English and Spanish with WP7.8. and of course with the bootload 4.x.x. since I am Italian, I would like the Italian language on your phone, but you can not '. then,
I need to figure out if the developers in the near future will be able to pull off the downgrade or another system to go back with SPL.
Click to expand...
Click to collapse
You can unlock your device and install a custom ROM and so get the language you want, plus you get to your device root privileges. You can follow this tutorial to unlock your device and install a custom ROM fully unlocked:
http://forum.xda-developers.com/showthread.php?t=1684912
elpinta25 said:
You can unlock your device and install a custom ROM and so get the language you want, plus you get to your device root privileges. You can follow this tutorial to unlock your device and install a custom ROM fully unlocked:
http://forum.xda-developers.com/showthread.php?t=1684912
Click to expand...
Click to collapse
I have tried all possible methods to return to WP7.5 bootloader 2.0.5, but without success. I also tried with goldcard but still without success.
do you know if there is an alternative method to get it back?
Thank you.
priologiacomo said:
I have tried all possible methods to return to WP7.5 bootloader 2.0.5, but without success. I also tried with goldcard but still without success.
do you know if there is an alternative method to get it back?
Thank you.
Click to expand...
Click to collapse
If you have a European device, you'll have no trouble following the tutorial, but if you hold a device acquired by a company, you must perform the Goldcard method. With this latter I mean that if your device is T-Mobile, you will need to use the goldcard.
On the other hand you can ease the problem you displayed when you make the goldcard method, because the problem you have or visualize on the screen of your device when making the goldcard, we do not know until you do not mention any error . Because it can be bad cable connection made to the goldcard.
Sorry for my bad English, I use Google Translate.
elpinta25 said:
If you have a European device, you'll have no trouble following the tutorial, but if you hold a device acquired by a company, you must perform the Goldcard method. With this latter I mean that if your device is T-Mobile, you will need to use the goldcard.
On the other hand you can ease the problem you displayed when you make the goldcard method, because the problem you have or visualize on the screen of your device when making the goldcard, we do not know until you do not mention any error . Because it can be bad cable connection made to the goldcard.
Sorry for my bad English, I use Google Translate.
Click to expand...
Click to collapse
I would like to say that my phone is branded American MOVISTAR with wp 7.8 bootloader 4.6.
so my question is:
you can do the jailbreak to wp 7.5 bootloader 2.5?
I tried with goldcard method, but no positive result.
I ask you: can you give me a detailed solution? (detailed guide)
Thank you.
sorry for my english, but I use google translator.
priologiacomo said:
I would like to say that my phone is branded American MOVISTAR with wp 7.8 bootloader 4.6.
so my question is:
you can do the jailbreak to wp 7.5 bootloader 2.5?
I tried with goldcard method, but no positive result.
I ask you: can you give me a detailed solution? (detailed guide)
Thank you.
sorry for my english, but I use google translator.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1684912
You can follow the tutorial to make the gold card. This tutorial is easier for all users (but using the appropriate files for your HTC Radar device, below):
http://forum.xda-developers.com/showthread.php?t=1597837
Use the following files to flash with goldcard:
- Goldcard-tool
- My custom goldcard.img
https://onedrive.live.com/?cid=5d5d289b41d072c3&id=5D5D289B41D072C3!16768&authkey=!AO8RhjbStgxWHFU
-HSPL_WP7SG1 HTC Omega "Radar":
http://htcfanboys.com/download/cotulla/?action=list&folder=240
elpinta25 said:
http://forum.xda-developers.com/showthread.php?t=1684912
You can follow the tutorial to make the gold card. This tutorial is easier for all users (but using the appropriate files for your HTC Radar device, below):
http://forum.xda-developers.com/showthread.php?t=1597837
Use the following files to flash with goldcard:
- Goldcard-tool
- My custom goldcard.img
https://onedrive.live.com/?cid=5d5d289b41d072c3&id=5D5D289B41D072C3!16768&authkey=!AO8RhjbStgxWHFU
-HSPL_WP7SG1 HTC Omega "Radar":
http://htcfanboys.com/download/cotulla/?action=list&folder=240
Click to expand...
Click to collapse
hello, then you're telling me that with the goldcard method can solve the problem?
so to sum up, I have the phone branded with MOVISTAR boatloader windowsphone 7.8 and 4.6.
but, excuse me a moment, I tried more than once with the goldcard method but without success.
possible that you've succeeded? let me know.
hello and thank you.
priologiacomo said:
hello, then you're telling me that with the goldcard method can solve the problem?
so to sum up, I have the phone branded with MOVISTAR boatloader windowsphone 7.8 and 4.6.
but, excuse me a moment, I tried more than once with the goldcard method but without success.
possible that you've succeeded? let me know.
hello and thank you.
Click to expand...
Click to collapse
Exactly, I was hit with my 3 devices HTC Radar "Free, Movistar and Vodafone" and with the same bootloader 4.6. Try it with another USB flash drive or other card reader, but before you buy or try different SD cards or other flash drive, you might have a bad connection in home goldcard cables, as always seems to fail for this problem.
Try to reconnect the cables again and advised welding.
PS: Sorry for the delay
elpinta25 said:
Exactly, I was hit with my 3 devices HTC Radar "Free, Movistar and Vodafone" and with the same bootloader 4.6. Try it with another USB flash drive or other card reader, but before you buy or try different SD cards or other flash drive, you might have a bad connection in home goldcard cables, as always seems to fail for this problem.
Try to reconnect the cables again and advised welding.
PS: Sorry for the delay
Click to expand...
Click to collapse
OK. I solved you can also unlock bootloader with 4.6 with goldcard. I'm very happy. Thank for you collaboration.
priologiacomo said:
OK. I solved you can also unlock bootloader with 4.6 with goldcard. I'm very happy. Thank for you collaboration.
Click to expand...
Click to collapse
I'm glad more for you, now just enjoy your device.
A huge greeting and you have a good day.