Alright so, I need help with my HTC EVO 3D.
*Now don't worry I've tried every search and used every resource nothing that will anwser or fix my specific circumstance.
I rooted my HTC EVO 3D, and everything was fine, all ran like normal. (With the intention to install custom ROM's.) I found one that appealed to me, the ViperROM. After following multipe tutourials strictly, I had the problem of when I restarted my phone it wouldn't load to normal interface. I just got to HTC logo backed on a white screen for about 10-15 seconds then it would turn off and restart, to the same proccess of going into the white screen.
Now before people start coming up with anwsers I will list everything that I've tried, hoping that some expert or someone with a great deal of knowledge will help me out:
> Tried installing the ROM again, multipe times actually
> Wipe Delvik Cache and Cache Partition along with Factory Reset and data wipe in all possible sequences
> Assuming somthing was wrong with the ROM, I tried installing other ROM's, also strictly following tutourials and having the same result
> I put the RUU file on my phone but it won't automatically flash, so I tried saving as a .ZIP and installing it and it aborts
I'm becoming extremely frustrated and dissapointed that I even rooted my phone and went into this.
Now, does anyone have a solution or idea of my problem?
Feel free to ask furthur questions if I forgot to mention some details.
Thanks.
When you try to RUU, are you downloading a zip or an exe? Exe files need to be ran from your computer. Zips need to be named correctly (don't add a zip if you don't see it) and flashed through the bootloader. Flashing an RUU through recovery won't work.
Assuming you can access recovery, do you have a nandroid backup you can restore? If you can't or you get the same result, try running an RUU from your computer.
If all else fails, try the Evo 3D forum. I'm sure you could pm a moderator to move this thread over there.
Good luck!
Supersonic Evo 4G | MIUI | Tapatalk
Alright, thanks for that. It gave some understanding but when I start the Installation Wizard, it says my phone is connected? Any thoughts?
And I'm very new to this site would you possibly be able to ask a mod. for me? Or give me the name of one? Thanks.
How do I restore my backup file
I believe that USB debugging must be turned on for the RUU to run. I'm from the original Evo, but the steps should be similar. Try running the RUU from fastboot - it should be an option on your hboot (bootloader) screen. Also be sure that you have the correct drivers installed. I've never personally RUU'd myself, so I can't offer much more guidance on that part.
If you can't get the RUU to run, you can always use a zip file through hboot, just be sure to download the correct one. For the Evo the file must be named PC36IMG.zip... it'll be different for the 3D - I think it starts with PG.
If you made a backup in recovery then you can restore it by following the same steps, just choose restore instead of backup. You should've made a nandroid backup prior to flashing - it's in every guide. If you used Rom Manager, then bout into recovery and you should see a backup/restore option. Choose restore and select the backup.
If you did use Rom Manager, I suggest doing everything manually once you get your phone back up and running. Rom Manager hinders your learning experience and restricts your control over your device. Find your roms on XDA and download them from their thread. Do your backups from recovery, wipe and flash from recovery. You may have done it manually and still ended up in this situation, but I'm just giving my perspective on automated flashing.
To have the thread moved, use the report button on the first post. There should be an option that says that you need the thread to be moved. I'll report it for you tomorrow if you can't figure it out.
Good luck, I hope you get everything worked out :]
Supersonic Evo 4G | MIUI | Tapatalk
Related
MY TBOLT MUST DID THE OTA OR ATLEAST TRIED TO WHILE I WAS SLEEP NOW IT KEEPS POWERING OFF THOUGHT I HAD ROM MANNAGER TO RESTORE A BACK UP OFF MY SD BUT IT MUST DIDNT INSTALL AFTER LAST UPDATE I ONLY HAVE JUST THE PREMIUM LICENSE. I THOUGHT IT WOULD STAY POWERED LONG ENOUGH TO GO DL ROM MANAGER IN THE MARKET BUT IT WONT. I TRIED DL THE NEW OTA SO I CANN PUT IT ON MY SD AND FLASH HBOOT BUT IT KEEPS NAMING WITH THE .ZIP.ZIP EXT NO MATTER HOW MANY TIMES I RENAME IT WHAT CAN I DO I LOOKED HERE http://www.thunderboltforums.com/fo...-get-rid-ota-forced-reboots-rooted-phone.html BUT I NEED ROM MGR DO I NEED TO DL A STOCK AND UNROOT IT WHAT CAN I DO.... HELP PLEASE SAD PART I WORK FOR VZW AND I KNOW HOW THEY DO WITH EQUIP CHARGEBACKS
First, locate your caps lock and TURN IT OFF. Next locate your period key and put them on the end of your sentences. Making sense of your post is giving me a headache.
Now, on your computer you need to disable the "hide file extensions for known file types" option to fix the zip.zip problem. Can't give you exact directions since you didn't say which os you're using.
Sent from my ADR6400L using Tapatalk
Windows7 currently
I have the same problem and I tried to get in through the clorkworkMod adb shell, but the device is not recognized by adb...? When the device boots up it is recognized. with my DINC I could use the shell while in clorkworkmod.
Is it showing as device offline or not showing the device at all. If its offline, through cmd, close adb server, then start it back up, half the time that fixed that problem for me. If its not showing at all, try setting it to HTC Sync i believe was the one i had to do at one point for it to register. I've rooted 4 times using ADB method and each time its been a little different, so i can't narrow down what i'm doing wrong to help you more with the adb, sorry.
Similar Issue
Hi All and thanks to all the cats on here that willfully give their knowledge! I have a Tbolt - Rooted with Revolutionary, stock rom (removed VZ Bloat via Titanium ), but this latest OTA update is not leaving me alone. I try to reject it and magically a few days later I get out of nowhere reboot and then the android exclamation point with a triangle. I use the Clockwork Mod Recovery to wipe data cache and reboot which makes the update manager get upset saying it failed. The error I see in Clockwork is this:
CWM Recovery V5.0.2.1
E: Failed to verify whole file signature
E: Signature Verification Failed
Install Aborted
So how can I get this update (I am assuming it is to fix the HTC fail for new exploit out there) which I think would be a good thing. I am not ready to flash a custom ROM yet so please don't reply saying "Just flash with my favorite ROM"
Thanks ahead of time!
It pushes the update, and if you don't reject within 3 mins, viola, you have a nice new update. If you can still get into recovery, which it sounds you can, install a stock rooted either full or debloated. Thats the updated equivalent to what you have now. Make sure you grab the rooted though. Here is the full rooted (not debloated) http://www.multiupload.com/H06XI7W380
from this thread
http://forum.xda-developers.com/showthread.php?t=1312193
I'd probably wipe cache and dalvik cache, but you can probably leave data since you're staying stock.
Thanks for the direction nbdysreal!
Ok, I've already searched the forums, both in the Evo3D section and outside, I've also have within the last week tried many different sense roms, all of which had the exact same problem: my camera does NOT work.
The closest thing to working was mike1986's Android Revolution HD (so far). The camera app boots into the window that ask to choose between Done or run the Demo Video. The Demo Video sends ye off to the internet browser. Hitting Done goes straight to my problem.
The application opens into a black screen. Sometimes the backlight is on (noticed this is a 'feature' of the newer roms that has came out/updated within the last month). That's it. After hitting home to exit the application, I have noticed I get either dimmer horizontal strips of the screen or the screen has a ghost of the lighter portions of the screen image that slowly moves to the left. After a few seconds of this strangeness, the screen reverts back to normal. A few times I got the impression that the screen's dual layers having synchronization problems.
I'm about ready to give up and go back to the stock rom, maybe I'll even try the 'cleaned' versions before trying the rooted shooter stockers. If all else fails, I'll even try to use the full OEM installer and return the phone back to stock, if this is the only option left to get a working camera. I'd prefer to use a custom rom that allows undervolting/overclocking and has the fat trimmed off, but if I have to, I'll go back to stock rooted. ...now that I think of it, I started to have problems with the camera right after I applied the HTCDev Root method. And, yes I DID follow the instructions to the letter.
This is quite frustrating as I've have as yet to find a rom that has a working camera! I've already tried the following roms:
Shooter-Rewind-3D-RLS2.1+RLS3
WTSB_Evo3d_1.91
CleanROM_2.7
CleanROM_DE_1.2
Chogardjr3D-2.3.4-Stock
Chogardjr3D-Blue-v1.3
STEAL25_inbREDedROM_2.1clock
viperROM_RC1.3
viperROM_RC2_Rebuild_Test28
Android_Revolution_HD-Evo3D_CDMA_1.1.1 (current)
I haven't tried but already downloaded:
Gerbil-6-shooter_v.2.2.4
freEVO+3D+2.1
WTSB Hydro e3d 2.3 (want to try this one, but keep having problems downloading, the server keeps on downloading a 35kb index.html instead of the rom itself)
If the above roms fails, then I going to try reloading the rooted stock rom
shooter_2.08.651.2_cleaned_v0.4.2
Else one of these two...
Shooter_2.08.651.2_deodexed_rooted
Shooter_2.08.651.2_odexed_rooted
If all these fails, sigh, I gonna start over again with the full oem install...
PG85IMG_2.08.651.2.zip
And see if the camera still broken. If so, then gonna apply all OTA updates FIRST before applying the HTCDev root method again. This is the only thing I did not do before. If this doesn't work, I dunno what else to do then.
Any suggestions, rom-wise or camera-wise? I've been reading around and found a thread in the Amaze section that suggested that the camera problem might be kernel-level. Think this may also apply to the e3d?
I've been doing sleepless nights for the past 5 days already trying roms after roms and apk after apks. I'm about reaching the end of my thread (and patience) and figured it's time to ask the pros here on xda.
Thanks in advance...
-Lance (Lanaka)
Reserved for Fixed Post.
I forgot to upload my hardware/software specs. I'm out of time as I have to go to work, so I'll edit it onto this post during a slow period at work.
K here's my hardware/software specs:
---Hardware:
------Hardware Version: .. 0002
------Processor: ............ 1.2 GHz Qualcomm MSM8660 Dual-Core
------Memory: ............... 1GB
------Display: ................ 4.3 inch QHD resolution
------Main Camera: ........ 5Mpx*2
------Front Camera: ....... 1.3Mpx
---Software:
------Android Version: ..... 2.3.4
------HTC Sense version: 3.0
------Software number: .. Android Revolution HD 1.1.1 by mike1986
------Kernel version: ...... 2.6.35.14RCMIX-ACS-EVO3D-CR-V9-g98e7362-dirty
------------------------- [email protected] #6
------------------------- SMP PREEMPT Mon Oct 24 13:13:49 CDT 2011
------Baseband version: . 0.97.10.0808
------Build number: ........ 2.08.651.2 CL130920 release-keys
------Browser version: .... WebKit/533.1
------PRI Version: .......... 1.24_003
------PRL Version: .......... 10602
Bootloader:
------SHOOTER XC SHIP S-0N RL
------HBOOT-1.50.0000
------eMMC-boot
------Aug 7 2011,10:21:40
---Recovery:
------Team Win Recovery Project (twrp) v1.0.3
------Based on Android System Recovery <2e>
Any other information you need, lemme know and where/how get it.
Mahalo Much
-Lan
Infected eternity ROM works...
Sent from my 3vo
http://infectedrom.com/showthread.php/561-ROM-Eternity-2.3.4?p=10369
Sent from my 3vo
nearly ALL the ROMs you posted, nay, all of them, work - if they didn't there would be a hellstorm in those threads. My guess is it has to do with how you're flashing the ROM. Since you have hboot 1.5, customized kernels (which contain camera stuffs) do not fully apply in a normal flash. You need to first fastboot usb INTO recovery and THEN flash the ROM. That should work. Also, update TWRP to 1.1.1. Of course you'll need to do a wipe as well. Hope this works for you.
You might also want to try one of the many superwipes.
User error. Camera works on roms. Maybe ur phone is broken
Sent from my PG86100 using XDA App
I'd go with what il Duce said. You have to flash the kernel seperately. If you do decide to go back to stock you can always add su and also remove what you don't want.
Sent from my PG86100 using XDA App
fsu311 said:
Infected eternity ROM works...
Click to expand...
Click to collapse
Ok, I'll give it a try next after the ones I've already downloaded. I'm a methodical type of guy (don't like leaving thing left undone).
il Duce said:
nearly ALL the ROMs you posted, nay, all of them, work - if they didn't there would be a hellstorm in those threads. My guess is it has to do with how you're flashing the ROM. Since you have hboot 1.5, customized kernels (which contain camera stuffs) do not fully apply in a normal flash. You need to first fastboot usb INTO recovery and THEN flash the ROM. That should work. Also, update TWRP to 1.1.1. Of course you'll need to do a wipe as well. Hope this works for you.
Click to expand...
Click to collapse
That's what I'm figuring. I start reading the original set of posts, then randomly check out a few posts in the middle, and then read the last 10%. The roms i've picked mostly had either minor issues caused by misflashing or other user errors. A few actually said had an issue or two but nothing that'd stop me from giving the rom a try.
Yup, that's the MO I've been using as instructed in the following thread:
http://forum.xda-developers.com/showthread.php?t=1239821
I'll go thru the step-by-step process I used and you can nitpick where I went wrong,
I've placed a copy of adb.exe, AdbWinApi.dll, fastboot.exe and TWRP's recovery.img into folder c:\adb\
A little tip here, as I play with windoze XP a lot, a trick I used to eliminate the need to cd so much with cmd.exe. I did this after the 3rd ROM!
I place a shortcut link to cmd.exe into this same folder with the above files and exes. Next I open the Properties window for this shortcut, I made the following changes:
Start In: c:\adb
Comment: Starts cmd.exe in adb folder.
What happen is that cmd will open its window with the c-prompt already IN the same directory as my android files. Also, when i mouse-over the shortcut icon, it will popup a message reminding me that this link starts cmd.exe in adb folder.
Then I do the following:
I connect the phone to the laptop using the usb cable, set the phone to disk drive mode. Once Windows recognizes the volume and mounts it, I type the following:
c:\adb>adb reboot bootloader
After the e3d reboots into hboot, I then type the following:
c:\adb>fastboot boot recovery.img
downloading 'boot.img'... OKAY [ 1.250s]
booting... OKAY [ 0.000s]
finished. total time: 1.250s
Once TWRP loads, I then switch to the phone (WITHOUT disconnecting the phone from the laptop). Here on, I use the keys on the phone to navigate to the necessary functions. The proceedure I used mirrors what Steel25 suggested in the following thread:
http://forum.xda-developers.com/showthread.php?t=1269610
I initially thought it was an overkill, but figured probably wouldnt hurt to be safe than sorry.
If the installed rom is something I liked, I nand it first...
I then enter the Wipe Menu proceed to hitting each of the following:
Wipe Cache
Wipe Dalvik Cache
Wipe Everything (Data Factory Reset)
Wipe Battery Stats
Then I go to Advanced/Format Menu and hit each of the following:
Format SYSTEM (/system)
Format DATA (/data)
Format CACHE (/cache)
Format SD-EXT (/sd-ext)
Then I go back to top menu and enter Install Zip Menu, and first I hit:
Wipe Cache and Dalvik Cache
Then I enable:
Reboot After Successful Flash
THEN I:
Choose Zip To Flash
(Navigate to where the rom or app zip is located and select it.) Here I take a break and let TWRP does it thingy and check back on the phone in 5 minutes or so.
After recovery reboots the phone back into system, I let the phone sit on the lockscreen for 10 minutes to let the rom complete it's init process. Then I skip thru the entire initial setup prompts (altho I enter NO for Tell HTC). I reboot phone back into system, let it sit for another 5 minutes on the lockscreen before I hit the Android Market app to trigger the process of linking the phone to my google account. I then let my account sync. Once my new email icon pops up on the notification bar, I check out the camera. By the time I've hit the 3rd rom, I've had read about the camera problem possibly being a kernel level issue, I've since then added this step....
Menu/Settings/About Phone/Software information/More
Here I took note on whether the Kernel version info has changed as well. (And for the most part, yes, the kernel information DOES change with each rom).
K, now ye can start thrashing me...
-Lan
Drewmungus said:
You might also want to try one of the many superwipes.
Click to expand...
Click to collapse
I'll try that, altho I've never used it before. Even when I had my e4g, I never heard of this one until I started my current research on the e3d. Any particular one you'd (or anyone else'd) recommend?
Sigh, lotta work rooting and flashing the 1.50 e3d, compared to the good ol' e4g! >8p HTC!
Mahalo Much!
-Lan
cajones42 said:
Maybe ur phone is broken
Click to expand...
Click to collapse
Gods! I certainly HOPE NOT! It'd be a real b!atch if this proves to be the case.
Seriously, tho. I'm thinking it'd probably not be the case as I had the phone and was playing with it stock and unrooted for nearly a week and during the whole time, the phone's camera worked with nary a problem. That's why as a check value, I'm going to restore the phone back to stock unrooted state AFTER I try the last 4 roms I still have en-queued. This doesn't include the cleaned/rooted stocker, the full/rooted stocker nor the full OEM stocker.
-Lan
unCoRrUpTeD said:
I'd go with what il Duce said. You have to flash the kernel seperately. If you do decide to go back to stock you can always add su and also remove what you don't want.
Click to expand...
Click to collapse
Ok, I'll try that next. Altho, I gonna have to read up on how to prepare the kernel for flashing separately. Am I correct in guessing that I probably could get away with making a copy of the zip file and deleting everything in it except for boot.img, then adb boot into recovery and set the flag for check sign off before flashing the custom zip I just made? If that's not correct, mind pointing me to the apropos thread? (...or tell me what I need to do for separate flashing?)
If all else doesn't work, that's what I intend with the stocker roms. SU, TI, RE. Then time for me to research on where what and how to root out all the bloat meself. I'll worry about that later cuz I no need do that IF i can get a pre-made rom and kernel to take root in me e3d!
Mahalo Much!
-Lan
You DON'T have to flash the kernel seperatly using the boot.img method with HBoot 1.50. As long as you access recovery from fastboot you can flash everything normally & the kernel will stick. Just sayin'
SketchyStunts said:
You DON'T have to flash the kernel seperatly using the boot.img method with HBoot 1.50. As long as you access recovery from fastboot you can flash everything normally & the kernel will stick. Just sayin'
Click to expand...
Click to collapse
except he's already doing that and running into problems...
@OP - man you are wordy lol. Just a simple FYI, when you're phone is running and you hook up to usb with the intention of running adb, DO NOT turn on disk drive, leave it as charge only. Also, the way to flash the kernel as a stand alone is pull the "boot.img" from the ROM zip, put in your path, and then "fastboot flash boot boot.img". Also, there's an app made by dev "joeykrim" called "flash image gui" that allows you to flash kernels (boot.img) from your OS and is known to work with hboot 1.5.
il Duce said:
except he's already doing that and running into problems...
@OP - man you are wordy lol. Just a simple FYI, when you're phone is running and you hook up to usb with the intention of running adb, DO NOT turn on disk drive, leave it as charge only. Also, the way to flash the kernel as a stand alone is pull the "boot.img" from the ROM zip, put in your path, and then "fastboot flash boot boot.img". Also, there's an app made by dev "joeykrim" called "flash image gui" that allows you to flash kernels (boot.img) from your OS and is known to work with hboot 1.5.
Click to expand...
Click to collapse
Ah, didn't know that, mebbe that's why I'm having problems. I'll try reinstall one of the earlier ROM and see if there's any difference. If that doesn't fly, I'll try the kernel separately. I went with hard drive mode cuz I got actual confirmation the device was loaded. Charge only, didn't get any indication that the pc seen the e3d, sigh, noticed the sense and adb interface is rather ...crude.
Heh, wordy, that's what you get when you have an English major for a mother and an English/Japanese Translation Specialist (aka Cultural Attache in the US Army) for a grandfather...
I'll give joeykrim's flash_gui a try too. Just downloaded it. Cross fingers for luck. (roll eyes at 1.50)
Thanks dude, if I could, I'd hit yer thanks button again for good measure.
EDIT: clicked the button again...
Update: Back to work on problem...
Been a while guys. Unfortunately, work becons (or more accurately, intruded). Had to deal with a bunch of sht from my job. Things gone to the dumps there. Well, enuff of that.
In meantime, with my phone being activated and in use, I tried to tether (teeether, hehe) my e4g to my e3d and noticed I'm also having wifi issues. What rang a bell is when I noticed my wifi tether issues disappeared after I turned off 3G. It's like, heeeeey, didn't I read something like this in xda??? After doing some researching (on xda, of course ) I've learned that this is also a kernel issue, most often because the new kernel was not properly flashed in conjunction to having the correct matched kernel modules (wifi, CAMERA, 3g/4g, etc.) installed as well. On reading these, I went 'hmmm...' Looks like all of these issues others and I that have been experiencing are all kernel/module misflashes (no thanks to hboot 1.50). Where I think I hit pay dirt is when I found a xda thread that actually explains in depth Flash Image GUI, which was also mentioned earlier in THIS thread (thanks, il Duce).
So, I have downloaded the apk, installed it. Downloaded a new ROM (Olympus Trinity XE Version IV) STRAIGHT to phone...
Oh, just remembered. I've noticed another possible cause of problems. I've originally downloaded the various files from xda and then either push it to phone or more often just enable hardrive mode and drag/dropped it into the phones sdcard directly. Normally, I check the md5 hash on download, but yesterday, I ALSO checked the md5 hash again after moving it to the phone. Meaning, I downloaded ROM to pc, then checked md5 hash, all good. Copied ROM to phone and then checked md5 hash again. NOT good. Somehow, it changed during the copy process. What prompted me to check was I also downloaded Flash Image GUI to pc and copied it to phone and then had phone try install it. It failed to "parse" file correctly, which tells me that the file may have been corrupted. I downloaded Flash Image directly to phone and tried again, and success! Suspicious now, I checked the md5 hash of all three copies of the apk. The laptop downloaded and the phone downloaded copies matched the source's md5, while the COPIED version did NOT match! Whaaa Daaaa FFF(bleep!)!!! I then checked the two copies of the ROM (pc downloaded and phone copied) and they DON'T match!
Sigh. I'm in a area that has poor 3G connection, while ironically, my laptop's 4G was good.
So, I bit the bullet and endured the nearly hour long download of the ROM directly to phone and double checked the hash (which matched the pc downloaded copy, the source didn't provide a hash). THEN I used the Flash Image GUI app to pull the kernel and modules and pop it into phone. Immediately rebooted phone into recovery. Well, tried. Wished Flash Image GUI gave the option to reboot directly into recovery or bootloader, like those 4-/5-/6-1 Reboot options offered in the various ROMs. Because it just simple did a reboot back into System.
I didn't want to take chance with problems with mismatched ROM/kernels (I was on Android Revolution 1.1.1 at the time), so I quickly turned to adb on my laptop and had it reboot phone into recovery.
Once in recovery, I immediately started doing my usual ROM change process. Wiped using every wipe option (except for sdcard) in TWRP (oh btw, I also updated it to 1.1.1 earlier) in both the standard wipe and advanced wipe menus. Once I did so, I then thought, hey where did Flash Image GUI dump the kernels into? Couldn't remember whether it was DATA or SYSTEM. But decided that with Flash Image GUI it's ain't no hassle to reflash the kernel again after the ROM is installed. Besides, read somewhere that some issues was resolved after reflashing the kernel again after the ROM, so wouldn't hurt to try anyway.
Will let ye know how it goes, TWRP is installing Trinity XE as I type this. Gonna continue the SOP by letting it sit for 7-10 minutes. Skip thru init setup. Reboot. Let sit for another 7-10 minutes. Relink my google account. Let first Sync finish. (Basically let it sit again for another 7 minutes). Reboot. Hit Market and download Flash Image GUI, and pay for it, it's well worth IT!!! Flash the ROM's kernel/modules again. Reboot. And hopefully it should be a-ok!
(cross fingers ...on both hands)!
-Lance
PS: Assuming it's fixed, I'm gonna edit the second post and reflag this thread as resolved. Will put what I did to get it fixed, including all necessary links and credits as expected. I know it's premature, but THANKS, I wouldn't have gotten even this far without you guys (and gals) on XDA!
PPS: Also chris.goodman's AnthraX Kernel thread was also quite informative. Mebbe I'll try a ROM that features AnthraX. Somehow, the thought of being over-clocked to ~1.52G sounds appealing!
Not the first post a noob really wants to make...but I've been searching the forums for an answer to my problem, but can't seem to find the info on the issue I'm having. I've seen some that were close & tried what was posted there without any success. I've checked out the Don't Panic -- Please Read First, includes troubleshooting guide Thread By: om4
A few days ago, I tried to install CM10 on my 4G LTE w/S-ON / HBOOT- 1.19. I was able to unlock the bootloader & install TWRP. Everything seemed to go okay until I rebooted my phone after installing CM10. It just hung on the Cyanogenmod splash screen. I tried re-installing it & kept getting the same problem. Today, I tried to install MeanROM ICS v6.5, but it keeps saying install failed. If I let the phone boot up, it'll hang on the MeanRom splash screen. I can still get into fastboot so I know it has to be a software issue. I've been beating my head against the wall for the past few days & just don't know how to fix it. Right now I have a very expensive paperweight. I'm hoping someone can help me fix this & get my phone back up & running.
TIA
for the millionth time
flash the boot.img seperately in hboot
Get (Flash Image GUI) off the Play Store.
If yr S-ON then u have to flash the kernel separate. That's why the ROM's keep hanging.
sent from my EVO LTE
http://forum.xda-developers.com/showthread.php?t=1772769&highlight=fastboot+gui
flex360 said:
for the millionth time
flash the boot.img seperately in hboot
Click to expand...
Click to collapse
I've been trying this all day, but must be doing something wrong. I found this: http://forum.xda-developers.com/showpost.php?p=29417266&postcount=1397, but was wondering if you might have more info on option 3.
TIA
if you know how to Fastboot, go for it, but use the Boot.img from the ROM you are flashing.
popper668 said:
if you know how to Fastboot, go for it, but use the Boot.img from the ROM you are flashing.
Click to expand...
Click to collapse
It's the only option I have now, so I hope I can figure it out. Wish me luck. I know it's probably something stupid that I'm missing & it's driving me crazy. lol
For meanrom make sure you have twrp 2.2.2.0 or later to be able install. The kernel installer will force the phone to reboot upon first run, this is when the kernel installs. For cm10 or other aosp based roms be sure to properly wipe phone. Cache, dalvik, factory reset, and system. Fastboot the kernel using SDK, mini SDK, uniflash, or boot image flasher. Do not use clockwork mod recovery to install roms as it is known to damage internel storage and or misc partitions.
ADB Tools Mini SDK
Thanks for all the info!!! I'm glad I found this place!!! I was able to get my phone working again. I found this post: http://forum.xda-developers.com/showthread.php?t=1937949 from back in October and found out that I was putting the boot.img in the wrong location. Once I fixed that, I have my phone back. Now I have to get it re-activated because I had to switch back to my Hero because I wasn't sure how long this would take. I hope Sprint will activate it even though is not stock anymore.
buddahj said:
Thanks for all the info!!! I'm glad I found this place!!! I was able to get my phone working again. I found this post: http://forum.xda-developers.com/showthread.php?t=1937949 from back in October and found out that I was putting the boot.img in the wrong location. Once I fixed that, I have my phone back. Now I have to get it re-activated because I had to switch back to my Hero because I wasn't sure how long this would take. I hope Sprint will activate it even though is not stock anymore.
Click to expand...
Click to collapse
have your first thanks
lol
the thanks is for using the search function lol
Well now I have another small problem. When I try to use the camera or go into gallery, it says no external storage available. Looks like I'm off to search the forums again for a fix. I'm sure it's something minor.
It looks like it's the internal SD card. Under storage in settings it shows the external card's total space & the 3 GBs used for app data, ect...
When I try and mount the SD card, it says preparing card but doesn't do anything. I think I say something about changing something in TWRP.
Forgot to mention, I can't connect the phone via USB either.
Ha, fixed my SD card/USB issues by following the directions in this thread - http://forum.xda-developers.com/showthread.php?t=1812774
So I'm very new to all of the rooting stuff. I got an HTC 4G LTE off Ebay just to use as sort of like a tablet. The firmware on the phone kinda sucks so I wanted to root it and go with a better version of Android that the bloatware-inflated version HTC provides. Not to mention updates are no longer supported.
I successfully rooted the phone with TWRP and followed the instructions to wipe the phone and such. This is where the instructions I found were kinda "off" and started using way too much lingo so I decided to wing-it a bit, thinking I had sort of understood it. I went to install, installed the BeanStalk and Gapps zip folders that are available in the the other section.
Rebooted my phone and it wouldn't go past the HTC boot logo... So I tried again. No luck.
I managed to get back in TWRP and I'm wondering what I need to do in order to get this bad boy to work. I checked the troubleshooting threads and found the section on boot-looping, but so I did the cache wipes it stated, selected "Factory Restore" and it rebooted back into TWRP. I'm not really sure what to do. Do I re-install the BeanStalk and Gapps zips, or am I missing something?
Thanks for any help.
If the phone is S-on you'll have to flash the kernel separately from the ROM itself. Hit the top link in my sig and read the entire guide. I think it will be quite useful to you:thumbup:
Good afternoon, !!!
First and foremost , I want to thank you all in advance for ANY and help, time & consideration with my current issue. I will try my best to be clear, and give all relevant info here in my first post. Please bear with me, I am pretty good when it comes to following directions, but i havent been able to find a CLEAR solution to this yet, and worried about further screwing up my phone.
** I use a mac. I currently dont have access to a PC, so i am looking for a mac remedy if possible.
I have an HTCONE m7. Tmobile.
- Bootloader - Unlocked
- S- ON
- Rooted
I kept getting a OTA software update notice for 5.14xxx, i understand the install kept failing due to the bootloader being unlocked and/or root. So after being annoyed for not able to get it, i began googling ways to get the update but to no avail. So i decided to do CM11, & recovery which i installed with no problem via, Cyanogenmod Installer.
After doing so, i realized i lost my Tmobile Wifi Calling (Yes, my own fault for not further checking that scenario before doing cm11), The wifi calling is needed 10000%, due to bad service in my apartment. Prior to finding out that cm11 doesnt contain the tmobile wifi calling , I attempted another system update thru the phone, (I assume it was updating cm11).
This is where the problem began, phone rebooted to Cyanogenmod simple recovery ,
1st few times that i tried = "apply update" > choose from internal storage , i searched different folders for the "update" file, but to no avail. The phone wouldnt start up, or install anything , and will just stay on the simple recovery. I even attempted an adb sideload. But couldnt figure that out correctly either.
After a few failed attempts, I tried wiping the phone, cache, factory reset etc. now the phone still stays on simple recovery, and all folders are gone, except for an o/ folder, that contains a clockworkmod folder, which contains nothing.
So now basically,Do i have to eventually get back to STOCK on this phone, to regain tmobile wifi calling ? IF So i need the easiest, mac friendly route to go .
Again, i thank you ALLLLL in advance, & my apologies if this is in the wrong section. Please note ive done my fair share of googling , and reading up on this. But consistently run into a problem.
OnlyEYEShine said:
Good afternoon, !!!
First and foremost , I want to thank you all in advance for ANY and help, time & consideration with my current issue. I will try my best to be clear, and give all relevant info here in my first post. Please bear with me, I am pretty good when it comes to following directions, but i havent been able to find a CLEAR solution to this yet, and worried about further screwing up my phone.
** I use a mac. I currently dont have access to a PC, so i am looking for a mac remedy if possible.
I have an HTCONE m7. Tmobile.
- Bootloader - Unlocked
- S- ON
- Rooted
I kept getting a OTA software update notice for 5.14xxx, i understand the install kept failing due to the bootloader being unlocked and/or root. So after being annoyed for not able to get it, i began googling ways to get the update but to no avail. So i decided to do CM11, & recovery which i installed with no problem via, Cyanogenmod Installer.
After doing so, i realized i lost my Tmobile Wifi Calling (Yes, my own fault for not further checking that scenario before doing cm11), The wifi calling is needed 10000%, due to bad service in my apartment. Prior to finding out that cm11 doesnt contain the tmobile wifi calling , I attempted another system update thru the phone, (I assume it was updating cm11).
This is where the problem began, phone rebooted to Cyanogenmod simple recovery ,
1st few times that i tried = "apply update" > choose from internal storage , i searched different folders for the "update" file, but to no avail. The phone wouldnt start up, or install anything , and will just stay on the simple recovery. I even attempted an adb sideload. But couldnt figure that out correctly either.
After a few failed attempts, I tried wiping the phone, cache, factory reset etc. now the phone still stays on simple recovery, and all folders are gone, except for an o/ folder, that contains a clockworkmod folder, which contains nothing.
So now basically,Do i have to eventually get back to STOCK on this phone, to regain tmobile wifi calling ? IF So i need the easiest, mac friendly route to go .
Again, i thank you ALLLLL in advance, & my apologies if this is in the wrong section. Please note ive done my fair share of googling , and reading up on this. But consistently run into a problem.
Click to expand...
Click to collapse
What's the radio version that is installed? Should be viewable on the bootloader screen at the top. That will help determine which RUU you need to get back to running again.
http://www.androidruu.com/getdownlo...50.20_10.40.1150.04_release_324846_signed.exe
If it matches the numbers/letters after the Radio_ part there, then that is the file you need. Let me know, and I can download it for you and extract the rom.zip from the exe and upload that. Then you can use fastboot commands to install it on the phone. If your radio version does not match that, please post and we'll see if there are other options.
I don't believe that flashing another rom would work right now since all the storage and such got wiped, but it might be possible to use adb while in recovery to push a rom to the internal storage and install it and then use fastboot to install the boot.img from the rom in bootloader mode since you are S-On.
es0tericcha0s said:
What's the radio version that is installed? Should be viewable on the bootloader screen at the top. That will help determine which RUU you need to get back to running again.
http://www.androidruu.com/getdownlo...50.20_10.40.1150.04_release_324846_signed.exe
If it matches the numbers/letters after the Radio_ part there, then that is the file you need. Let me know, and I can download it for you and extract the rom.zip from the exe and upload that. Then you can use fastboot commands to install it on the phone. If your radio version does not match that, please post and we'll see if there are other options.
I don't believe that flashing another rom would work right now since all the storage and such got wiped, but it might be possible to use adb while in recovery to push a rom to the internal storage and install it and then use fastboot to install the boot.img from the rom in bootloader mode since you are S-On.
Click to expand...
Click to collapse
Hey there , i ended up making a 2nd thread, in the HTCONE section.. I am currently trying a fix that someone just posted. http://forum.xda-developers.com/htc...date-issue-t2898480/post55889272#post55889272 I will try your fix next, if this does not work =0) Thanks again !! DEFINETLY APPRECIATE IT !!
IF mod can close this thread to avoid confusion, it would be appreciated.