Hey, long time reader first time poster!
I have an issue where I cannot factory restore through the menus or via a hard reset. Every time it goes into android recovery, it says "failed to boot 2". The phone has been rooted with the "one click method". Bootloader has never been unlocked.
I am currently
- running OS 2.3.4
- system version 45.217.MB860.Bell Mobility.en.ca
- baseband N_01.77.33p
- kernel 2.632.9-00002-gd5bf03a [email protected]#2
- build number4.5.2!-51_OLL-17
I was wondering if I were to flash a sbf would it fix my current issue?
If so, I understand that there is no bell sbf so would it be ok to flash to a 2.3.4 AT&T sbf or any other country specific version (ie. Orange UK)?
Also, flashing a sbf doesn't require you to have the bootloader unlocked correct?
And if I were to successfully flash, I wouldn't lose my sim-free capabilities?
If someone could shed some light on this matter that be greatly appreciated ! =)
Cheers
SEARCH!!! SEARCH!!! SEARCH!!!
You need to unlock the bootloader to flash anything - and seeing your helplessness I wouldn´t advice you to SBF at all!
Read the Pudding-Thread in the dev-section VERY, VERY carefully (it´s a STICKY)!
What´s your ultimate goal? Do you just want to have root or do you want to flash Roms? I think you can unroot your phone pretty easy with one-click and/or other tools found in the market!!!
Related
Hey i have At&t Motorola Atrix, i Want to unlock my boot loader. My phone is running 2.3.4(OTA), webtop version 1.2.0-110,build number 4.5.91 and kernel 2.6.32.9 and more over i rooted my phone . i read so many threads and in the end im so confused and i dont know from where to start. can you help me ?
http://forum.xda-developers.com/showthread.php?t=1202883
Sent from my MB860 using XDA App
im getting error when i click on start button it says failed to flash
You cannot get all the info you need in one post, search through the thread and look to see if anyone else is having your issue.
Here is another thread that offer up some links that might help too.
http://forum.xda-developers.com/showthread.php?t=1154600
You will have to read a little bit. It would take a very long time for someone to compile a tutorial that would include all the variables that might be relative to this phone.
usman.daud said:
im getting error when i click on start button it says failed to flash
Click to expand...
Click to collapse
usman.daud said:
Hey i have At&t Motorola Atrix, i Want to unlock my boot loader. My phone is running 2.3.4(OTA), webtop version 1.2.0-110,build number 4.5.91 and kernel 2.6.32.9 and more over i rooted my phone . i read so many threads and in the end im so confused and i dont know from where to start. can you help me ?
Click to expand...
Click to collapse
I can confirm that flashing the latest sbf from pudding will work on 2.3.4 OTA, using RSD lite. After flashing the sbf, you will get a 0x1000 cannot boot message, but don't worry, its not a real hard brick. When that message pops up, IMMEDIATELY go into fastboot and type "fastboot oem unlock" and you will not be bricked, and you will be unlocked. I performed this on my 2.3.4 OTA atrix yesterday, without any problems.
where u get latest Sbf file ? when i click start for flashing it gave error that flashing process failed
and also have u tired any custom rom ? and how was the experience
http://forum.xda-developers.com/showthread.php?t=1182526
use that sbf file. it works on 2.3.4 OTA.
read through the thread - it will explain well what to expect, explain the soft brick issue and how to remedy it, and also what you need to have in advance for it to all work smoothly.
MY RSD give error. when i entered in RSd support rsdlite show it connected when i start sbf flashing it give error that flashing process failed.0x7027 phone cant retrieve any help with that ?.
try using this version of RSDLite. It worked for me with this one.
http://forum.gsmhosting.com/vbb/archive/t-1229831.html
im previously on 5.3.1 is safe to use a downgraded version
yeah.
its just a different version of the pc software. downgrading is only a problem if you're downgrading phone software but this is ok.
not working
Same error? Did you check that the drivers installed correctly? Try a reboot on pc and use a different usb port
About to get my first Android Phone, leaning towards to Atrix because of the Telstra Blue Tick.
If I do get the Atrix I would like to root/custom rom install (gingerblur/bread or CM7 not sure yet) and remove the motoblur crap.
How hard are these too root/custom install roms on the telstra supplied handset?
I have been reading a lot about rooting and installing custom roms, but all the steps point towards those with a Bell/AT&T imported handsets. So not sure which are the correct steps I should follow. I don't want to brick my phone.
The (un)-locked bootloader is the first problem. Because you need and unlocked bootloader to install root/custom rooms?
I've been reading - http://forum.xda-developers.com/showthread.php?t=1182871
Reading these steps it says this "AFTER GET THE BOOTLOADER UNLOCK YOU CAN ONLY FLASH BY RSD SBF'S WITH "PUDDING" FOR NOW ON, SO IN OTHER WORDS BE CAREFULLY WHEN YOU USE RSD AFTER "UNLOCKED" BOOTLOADER"
Does this mean i cannot use the ROM Manager trick to install ClockWorkMod and CM7?
How do I also determine the actual version of the phone I have – 1.26/1.57/1.83/4.5.91?
Really confused, trying to find the correct steps to root/install custom rom/clockworkmod install on a Telstra provided Atrix phone.
Doing lot of research before I commit to getting a Atrix. Other option is a Samsung Galaxy S2.....
Any help is appreciated.
Thanks
mckinnon81 said:
About to get my first Android Phone, leaning towards to Atrix because of the Telstra Blue Tick.
If I do get the Atrix I would like to root/custom rom install (gingerblur/bread or CM7 not sure yet) and remove the motoblur crap.
How hard are these too root/custom install roms on the telstra supplied handset?
I have been reading a lot about rooting and installing custom roms, but all the steps point towards those with a Bell/AT&T imported handsets. So not sure which are the correct steps I should follow. I don't want to brick my phone.
The (un)-locked bootloader is the first problem. Because you need and unlocked bootloader to install root/custom rooms?
I've been reading - http://forum.xda-developers.com/showthread.php?t=1182871
Reading these steps it says this "AFTER GET THE BOOTLOADER UNLOCK YOU CAN ONLY FLASH BY RSD SBF'S WITH "PUDDING" FOR NOW ON, SO IN OTHER WORDS BE CAREFULLY WHEN YOU USE RSD AFTER "UNLOCKED" BOOTLOADER"
Does this mean i cannot use the ROM Manager trick to install ClockWorkMod and CM7?
How do I also determine the actual version of the phone I have – 1.26/1.57/1.83/4.5.91?
Really confused, trying to find the correct steps to root/install custom rom/clockworkmod install on a Telstra provided Atrix phone.
Doing lot of research before I commit to getting a Atrix. Other option is a Samsung Galaxy S2.....
Any help is appreciated.
Thanks
Click to expand...
Click to collapse
You can use all the same steps as the bell atrix. (international).
Flashing using rsd has nothing to do with cwm or rom manager. You can safely use those
As for version number go to settings> about phone> build number
The whole process is actually very easy I just recommend doing all your reading and follow all the steps exactly
sent from my Atrix via XDA premium
Thanks for your reply marko!
I went to a Telstra shop and looked at a phone they had on display so the phone I get will be the same if not close too it.
System Version: 4.1.47.MB860.Telstra.en.AU
Android Version: 2.2.2
Kernel 2.6.32.9 [email protected]
Build Version: OLYEM_U4_1.4.7
From everything I have been reading once the bootloader is unlocked I can then easily install CWM then update my ROM.
Hi,
I ordered an Atrix 4g yesterday on amazon.de and since flashing a custom rom on my previous phone was such and improvement I wanted to do the same with the atrix. But after reading some threads in the dev section I must admit i'm very confused and I have some questions.
- How do I know if my phone is unlocked? if not how to unlock?
- I think it ships with 2.2, update to 2.3.4 or just flash custom rom?
- Can anyone tell me all the steps I need to do to go from stock 2.2 to a custom rom? (CM7 Mod ICS FINAL or Neutrino ROM 1.4-S) (including unlocking, recovery etc) this part is very confusing because a lot of roms have different types of flashing and some are talking about fastboot, does my phone have this?
- How do I know what version of the phone I have? ATT? Tmobile?
- Is there any chance of bricking when doing this? With my previous phone you could ony soft brick.
I'm sorry if these things are already written somewhere but I just couldn't find em.
Thnx for all info you can tell me.
Check the noob guide in the gerenal section, its at the top of the forum,
To figure out your software version just go to settings >about phone
As for bricking you can only hard brick if you use the ota gingerbread update THEN use rsd to downgrade. So if you only use rsd to unlock then you are safe
sent from my Atrix via XDA premium
So I got my atrix a few days ago and have been looking to unlock/flash it since.
I read most posts/guides and I think I know what to do, but I'm still scared of bricking so I wanted to dubble check if I got it right
My atrix:
System: 45.31.0.MB860.Retail.en.DE
Android: 2.3.4
Build number: 4.5.2A-74_OLE-31
What I think I have to do:
1st: Flash SBF file (the IHOP file from the house of pudding) with RSDlite
2nd: Fastboot unlock
3th: Install clockworkmod with Fastboot like in:
ww w.addictivetips.com/mobile/how-to-install-clockworkmod-recovery-on-motorola-atrix-4g/
(remove the space between the WWW, not enough posts to post a link)
4th: Do a backup with clockworkmod
5th: Flash a custom ROM with clockworkmod and clear cache,dalvik cache and data.
Could someone plz comfirm that all this is correct?
Greetings!
That sounds about right
Be sure to follow any specific installation instructions for the Custom ROM you choose. Some prefer you wipe via fastboot, some want you to wipe certain partitions *after* installation, etc.
phnord said:
That sounds about right
Be sure to follow any specific installation instructions for the Custom ROM you choose. Some prefer you wipe via fastboot, some want you to wipe certain partitions *after* installation, etc.
Click to expand...
Click to collapse
ok, i'll be sure to pay attention to that, one more question.
Do I need root for any of this?
M_K_ said:
ok, i'll be sure to pay attention to that, one more question.
Do I need root for any of this?
Click to expand...
Click to collapse
ofcourse you would you can just download the gingerbreak.apk from this site; )
Sent from my MB860 using Tapatalk
OK, this all worked perfect and have been running Neutrino's since. But I wanted to try darkside now, can I just flash this in clockwork? Because I read somewhere when you flash an earlier version you get brick and neutrino's is 2.3.7 and darkside 2.3.5?
sorry if i am asking a question asked for too many times already,but i can't seem to find a solution to my case,or either the thread is no longer active since the TS did not update his results,thus making me confused if he hassuccessfully or unsuccessfully rooted his atrix
i'm using atrix mb860 ofw 2.3.4.and i'm trying to install neutrino 2.2 rom gt
so here are what i had done until now:
1.rooted my atrix using Pete's One Click Root : http://forum.xda-developers.com/showthread.php?t=1258599
2.installed titanium backup and backed up batch of everything.superusered.
3.Installed cwm from market and got superusered.
4.flashed cwm recovery for atrix 4g
5.tried to install romracer using cwm.selected to restore previous roms and also chosen both wipes but failed.atrix reboots and shows "failed to boot , starting rsd mood"
what my concern is about,is just "rooting" enables me to already install roms?if it does,what did i do wrong in my steps?if it does not,please show me the way.i do not know if i should or should not flash my sbf files and bootloader
also,i read that to show that my atrix is rooted,it shold show at the top right corner during boot.but i don't see any
please help me because i really don't know what i'm doing here.i'm still new and the guides provided by the developers are for experienced people.it does not provide the detailed steps.also,please do explain some of the terms used like what is the difference between rooted and unlocked devices.
if you are too tired to explain everything all over again,then just give me the required links.i'll learn my way.btw,if you are able to give me a working link,and updated threads that would be very hopeful since some don't re-edit their first post,thus needs us to find the answer in a 1000++ replies
thank you in advance
You need to unlock your bootloader. The text you're referring to in the upper left corner of the Motorla screen is "unlocked" and it only appears after you unlock.
You can do it manually. See here.
Or automatically. See here.
You CANNOT install a CWM without unlocking your bootloader first. Rooting does not let you install ROMS, unlocking the BL does.
thanks for the reply.so that's what i'm missing.is it necessary to flash my sbf?and since neutrino rom gt changes my kernel(i think).
so after unlocking my bl,i can then install romracer->neutrino then?i'll update again and see what happens
graphidz said:
thanks for the reply.so that's what i'm missing.is it necessary to flash my sbf?and since neutrino rom gt changes my kernel(i think).
so after unlocking my bl,i can then install romracer->neutrino then?i'll update again and see what happens
Click to expand...
Click to collapse
Yes, the pudding unlocker is a small 10mb sbf file. After flashing that with RSD, you'll run the fastboot oem unlock commands.
The kernel (boot.img) is completely different from the bootloader. (if I'm reading your ? correctly).
Correct: Unlock BL>install romracer CWM> BACKUP! > install your ROM of choice
okay,this is starting to get on my nerves.i went to pudding,then scrolled down to "RSDLite/Windows Drivers/Sbf_flash"->go to hxxp://goo.gl/vfUXc link->tried but failed as it's for at&t.mine is international then.just great!
went back topudding's thread.read again..."unlock"...YES!solution for international phone!heck,this is an sbf file,what am i going to do with an sbf file?if it's just copy and paste,that will be easy.
ok,so what i really need now is a real solution to an international atrix and not at&t's atrix.or is there actually another thread for just international atrix?i just don't understand at all.please help
http://www.youtube.com/user/TheSmokingAndroid
Ck the earlier videos that he has posted on unlocking the atrix, helped me quite a bit.
FINALLY DID IT!now to install neutrino gt!thanks for all your help guys!.this guide was indispensable:
hxxp://forum.xda-developers.com/showthread.php?t=1302423
a new question : how do i install romracer?the guide did say to install itbut i don't see the app?
nvm,finally able to install neutrino.thanks a lot guys!now where's the close thread button...
no wait,again another problem!i wanna ask at neutrino's thread but this stupid 10 posts rule is preventing me.so i need to ask here.after installing neutrino,my internal memory is left with 2gb only.where is the other 8gb?when i plugged into usb,i did find them.
to note,i used cwm to install neutrino gt.the zip file was in internal.does that have anything to do with it?any way to get it back?do i need to flash neutrino again?if so,please teach me
also,how to get the market back?
Hey,
I was on CM7, then I flashed Stock Gingerbread using CWM (Fruitcake, I think), I want to remove root and the "unlocked" sign when booting. I was searching this forum (and the rest of the internet ) for a couple of days and didn't find a solution. Either the links are dead or there is a person threating with hard brick. Does anyone know how to do this safely and has necessary files, please? Thank you in advance.
Wait, what exactly do you want to do?
If you want to just remove the text while the BL and everything else remains unlocked... That is impossible, you cannot do that.
If you want to re-lock your BL... well, that would probably be the only time (apart from when unlocking the BL) when you should reach for a SBF. There is no other known way to re-lock the BL.
Yep, I need to re-lock the BL, to get the phone to factory state (I know it won't actually re-lock the BL, just the sign will disappear). But I didn't find any usable SBF's, everybody is writing about hardbrick or the links are down. I found a couple of US ATT SBF's , but really don't know which one to use, I really don't want to brick my phone
Okay, I found this site with SBF's:
http://www.filefactory.com/f/89f588286a560e39/
I guess this one SHOULD put my phone back to factory state without root access and unlocked sign. Does anyone know, if it's safe? And if it's the only file I need to flash. Thanks
All the SBFs were removed here because they are too dangerous. For that same reason, you won't find many people here who will be willing to help you with them, not even say "yes, this one is good" or "no, don't use this one". It's just too dangerous and nobody wants to take responsibility for other people's phones like that. Not to mention, you failed to give any relevant information on your phone, so even if someone wanted to help, they can't.
What information do you have on mind?
Currently I'm running rooted unlocked stock gingerbread 2.3.4 (System version: 45.31.20.MB860.NonEFIGSRetail.en.EU, Build number: 4.5.2A-74_OLE-31.20).
If flashing SBF is dangerous, is there any method to get back to factory state?
Yes, that would be the information needed.
Flashing a SBF is the only known way to remove the "Unlocked" text while booting; however you will still find very little support here for doing that - like I said, it is too dangerous, things can go wrong too easily.
You can flash a fruitcake to return the system to stock, but the "Unlocked" text will remain.
That's what I was afraid of So no one will tell me: "Yes, with your configuration you can flash this and you'll be fine."
Nevermind, I will send for repair like this (problem with touchscreen - fantom touches, quite common hardware problem on atrixes) and in the worst case I´ll just pay for the repair.
Anyways, thank you for help, I really appreciate it! :good:
People have been known to just flash over the stock firmware and send it in and be fine. A lot of service centers don't really care about the unlocked BL or even a custom recovery.
i think he can remove unlocked sign with flashing motorola logo. if i remember corectly
Sent from my MB860 using xda app-developers app
Nope.