Hello all. Today I will be reviewing the Cruzer Lite Androidified High Gloss TPU Clear Case for the Motorola Droid Razr.
Initial impressions:
The Cruzer Lite Androidified case is made out the same TPU material most of us have come to love. It it covered in little android robots and is very flexible. There was no excess materials that I could find hanging off of it and all the cut outs look very clean.
Case design:
Design wise the case is a glossy TPU finish. It is all smooth with out any raised grip surfaces. There are cut out for the USB, HDMI and 3.5mm head phone jack on top. The Power button is also cut out and the volume rocker is covered. The LTE and micro SDHC card port is covered by the case, so to access them you will have to remove the case. There are also cutouts for the camera/flash and speaker on the back. The back microphone opening is also uncovered. The android robot is on the inside of the case so it will not rub off. Because of the design you can not see the Kevlar weave on the back which is a shame since it is an one off design feature of the phone.
Case functionality:
Grip wise the case is like most of your other standard TPU cases. It is very comfortable to hold and I have no problems holding it with sweaty hands. The power button is easily pushed and is very easy to find without looking at it since it has a cut out. The volume rockers also respond very nicely when pushed. I have no problems plugging in my USB cable to charge the phone and the headphone jack access allows for most headphones to be used. You can lay the phone screen side down since the case raises the screen up off the surface.
Conclusion:
I love the design of the android army on the case. The issue without having access to the micro SDHC card will vary with the user but was a non issue with me. The case has plenty of grip and adds minimal bulk to the phone. It is a great case design and is a great conversation starter. I have not tested this case with any docks, so I do not know if it will fit in those devices while on the phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Great review
I have been very happy with this case
Sent from my DROID RAZR using xda premium
Dakota0206 said:
I have been very happy with this case
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
What color did you get?
I got the white one. It looks really good
Sent from my DROID RAZR using xda premium
The orange is one of the better colors of this case
i have this case in red. looks tight!!
TeH PLAYA said:
i have this case in red. looks tight!!
Click to expand...
Click to collapse
Upload some pics
I have been looking for a case for my RAZR but haven't found one. I like this one but have a question. Will the phone fit in the docking station without removing the case? If not, how difficult is the case to get on and off? Thanks
OracleBlue said:
I have been looking for a case for my RAZR but haven't found one. I like this one but have a question. Will the phone fit in the docking station without removing the case? If not, how difficult is the case to get on and off? Thanks
Click to expand...
Click to collapse
Not sure it will fit on the docking station but it is not hard to take off.
What is the screen protector you have on there? Steinheil? The case along with that awesome screen protector make it look Razr sharp!
No screen protector on there, just the case.
Just got this case in the mail. Ordered it from Amazon and it shipped pretty fast. I'll reserve full judgment until after I've used it for a while.
But on first impressions it is pretty impressive. This is my first TPU case, but it seems better than the silicone glossy case I got at launch from Verizon. It is not as grippy as an Otterbox Defender case but certainly more grip than an Otterbox Commuter series (worst case I've tried) and a naked Razr. And it feels a little more grippy than the Verizon silicone case. Plus this TPU case is incredibly slim and light. And, might I add, this is my favorite looking of all the cases I've tried so far.
Sent from my DROID RAZR using Tapatalk
Deron Baker said:
Just got this case in the mail. Ordered it from Amazon and it shipped pretty fast. I'll reserve full judgment until after I've used it for a while.
But on first impressions it is pretty impressive. This is my first TPU case, but it seems better than the silicone glossy case I got at launch from Verizon. It is not as grippy as an Otterbox Defender case but certainly more grip than an Otterbox Commuter series (worst case I've tried) and a naked Razr. And it feels a little more grippy than the Verizon silicone case. Plus this TPU case is incredibly slim and light. And, might I add, this is my favorite looking of all the cases I've tried so far.
Sent from my DROID RAZR using Tapatalk
Click to expand...
Click to collapse
what color did you get?
joelmic said:
what color did you get?
Click to expand...
Click to collapse
I got the "clear" one. Although it looks more like frosted-white. It I'd the same color as the OP's pictures.
Sent from my DROID RAZR using Tapatalk
Just ordered the clear one from amazon. Looks great, Can't wait to see it when it gets here.
Adauth said:
Just ordered the clear one from amazon. Looks great, Can't wait to see it when it gets here.
Click to expand...
Click to collapse
You will enjoy it!
Recived my Cruzerlite Clear gloss TPU case today.
Nothing but good things to say. Fits snug where it wont fall off but not so snug you can't get it off when you want too. The cutouts for the power button, camera, speaker, and mic are perfect. The volume rockers are covered, but are easily adjustable through the case.
Looks great as well. I'd reccomend this case to anyone, as I plan on picking up a few more(different colors).
Awesome deal as well for only 10 bucks and change on amazon.
4 out of 4 stars for me!
Great job Cruzerlite!
As a matter of fact I just ordered 3 more Cruzerlite TPU Razr cases from amazon using the buy 2 get 1 free promotion. Now I have a blue, red ,and a green one on the way.
The other three skins arrived today.
They look great!
Sent from my DROID RAZR using xda premium
Related
OtterBox Commuter Review
Just got my OtterBox today, so thought I'd toss out some thoughts for those of you on the fence.
Those of you that aren't familiar with the OtterBox cases check out some info here OtterBox Case Series
Fit: This thing fits so effin nicely! I've tried the Commuter series on a few devices...and this seems to fit more snug than on other phones. The 3D Commuter I had seemed to bunch up ever so slightly. Same with Dell Streak and Evo 4G versions. My Galaxy S phone was pretty snug as well. Seems like they got this one right...cut-out for the mic doesn't look like it'll get blocked over time if the rubber gets loose.
Button overlays: They stick out a bit...which is the norm for Otters. I find them to be pretty handy. The power button especially, as most would agree without a case it can be a bit of a pain to press. Nice that I can stop myself from filing a fingernail on the volume rocker too. Much easier to press than the few other cases I've tried as well.
Dust Flaps: Tight and secure...without being annoying. Easy to open...plenty of room to plug in your cables. Not too stiff. Seems like they'll hold up for awhile. I've had some others that have fallen off way too early in the case life. Noticed the flap over the HDMI / USB ports DOES make the phone wobble a bit when using kickstand. Not a big deal...but might be an issue for some.
Cut-Outs: My only complaint here is with the kickstand cut out...seems a bit too snug. Seems to get caught a tiny bit on the rubber around it as you try to extend the kickstand. Pretty sure it'll straigthen itself out over time tho. Camera cut-out is nuttin special...just a rectangle around the lens and flash. Has cut-outs for the noise cancelling mics on the back as well.
Appearance: LOVE how it doesn't take away from the MoPho's unique look. I've gotten compliments on my phone for how slick it looks with the cut off corners. Yea.it's the little things that count. This isn't a case that hides the look of your phone...it accents the goodness!
General Feel: Not too slick....not too grippy. Slides in and out of pockets just fine. Definitely doesn't feel like I'll drop it. Always a good thing in my book. **Edit: After several hours of use, I've noticed the edges are kinda sharp. The hard plastic, when held in certain spots, can be agitating to your skin with it's sharp plastic.
So...in conclusion: I think this is the case I'll stay with for awhile. I've always enjoyed the protection afforded by OtterBox cases...and this should be no different.
Be aware, unless you rip out the insert on the HDMI dock it won't fit. You will have to remove the case for dock use.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I just ordered one from amazon after reading this. This would be perfect if they would have made a clip for it like the defender. I tried the defender at RS but it was just too much, this seems to keep the bulk down but still give that otterbox protection.
Does the commuter have a built in screen protector?
Doesn't look like it
AJC9000 said:
Does the commuter have a built in screen protector?
Doesn't look like it
Click to expand...
Click to collapse
No...comes with a screen protector you can apply tho. Doesn't cover the capacitive buttons tho.
Nice review
And I as a Otter Box commuter owner i agree it's better than the one I had on my 3D...
PS great lock screen ... name of it if i may?
Thanks ...
Sent from my MB855 using XDA Premium App
Yogi3 said:
Nice review
And I as a Otter Box commuter owner i agree it's better than the one I had on my 3D...
PS great lock screen ... name of it if i may?
Thanks ...
Sent from my MB855 using XDA Premium App
Click to expand...
Click to collapse
Agile Lock Screen
I opted for the Defender, which looks like the Commuter except it has 3 more levels of protection. LOVE IT!
I'll post some pics tomorrow morning.
Bandage said:
OtterBox Commuter Review
....
Be aware, unless you rip out the insert on the HDMI dock it won't fit. You will have to remove the case for dock use.
View attachment 684554View attachment 684555View attachment 684556
Click to expand...
Click to collapse
So this case will fit in the dock with the insert removed?
bcoutlander said:
So this case will fit in the dock with the insert removed?
Click to expand...
Click to collapse
Yeah with modification. Not pretty, but it works. I returned my dock already (since we don't need it anymore for root) or I'd snap some pics. Anyone else confirm this please?
FYI.....Case does not work with the Cardock
Seriously? Crap. I thought someone said it did in another thread... My case just came in, but I was gonna go buy a car dock this week. :-(
pzztgotbagz said:
FYI.....Case does not work with the Cardock
Click to expand...
Click to collapse
Sent from my MB855
http://www.newegg.com/Product/Product.aspx?Item=N82E16875992573
update: oh they went out of stock quick i guess, i was able to snag one though....
newegg's price is good, but thats about how much theyre going for online. retail stores would rip you off, but online price seems to be around the 22-25 dollar range.
lowest amazon price is 22.93 with free shipping from a 3rd party seller.
I bought mine for about the same price from a 3rd party seller on amazon and received it in 2 days (mainly cuz he was in the same state).
i got mine for 19.99 free shipping on amazon. love the case, felt so scared holdin it before.
I managed to get the Commuter to fit the car dock with minimal modification.
1- The rubber plug over the USB ports has to go.
2- Remove the ~1" bar over the USB ports from the outer shell. This part is indicated in green in the photo.
3- Shove the whole thing into the navi dock. Still tight, but it works.
Just copped ($22 on Amazon w/free shipping.) Propz - good review
Any one have it?
Sent from my HTC6435LVW using xda app-developers app
Mine came in the mail today. I ordered their lifestyle case (the slim one) on eBay and I have to say I am really satisfied with it. Chose this over the SG or their other one because those seem too bulky. Truly doesn't add much bulk to the phone as it still feels pretty slim and the raised, interchangeable bumpers on the corners are a great idea in theory. Kinda wish they came with red bumpers rather than orange, but the others are good. Miss the rubberized texture on the back of the DNA a little bit. Also, pressing the power button is a lot easier now; I think that's what I'm most pleased about. Also, the volume buttons are as easily pressed even though they are raised on the case. Before when I would reach to lock the phone with my index finger, I would accidentally hit the volume rocker. Haven't had that problem since. Again, very happy with it. Anyone his wants a slim case with a bit more quality over that 10 dollar tpu ones should definitely consider the ballistic LS!
Sent from my DNA using xda app-developers app
Just bought the Ballistic Shell Gel Case
I just bought the Ballistic Shell Gel Case on eBay for $20. I can't give the link coz it's my first post. I looked at the Diztronic case on Amazon, but at $20, it seemed that the Ballistic SG Case might be a better value. I guess I'll see when it arrives.
I just received the Ballistic LS Smooth case. I previously received the Diztronic case.
The Ballistic Life Style case is made of a grey TPU, which lacks the soft touch feel of the Diztronic case. Perhaps it's the fact that the Diztronic case is almost completely smooth, and the Ballistic case has a textured feel to it. I'd have to guess that the Ballistic case would be less easily dropped, because of the textured back.
I also like the slight curves around the edges, on the back of the Ballistic case, as compared to the completely smooth back of the Diztronic case. The Ballistic case feels more narrow in the hand, to me, then the Diztronic. Not sure if that's accurate or not, but it does feel that way.
The Ballistic LS case comes with four different colored, interchangable corner bumpers, black, orange, teal and grey. I replaced the orange bumpers that came installed in the case, with the Teal bumpers. Not too gaudy, but it gives the case a little bit of style.Installing the bumpers is a little fidgety... you need to make sure you put them in right side up, and then you need to keep pressing on them, from the inside of the case, until the nub pops out and lays flat! I guess it's something most people won't be doing very often, but it is a little bit of a hassle.
Buttons... power button is covered with a raised button, and I find it MUCH easier to turn the DNA on and off, with the Ballistic case on. Volume buttons are also raised, and seem to work very well. The integrated power and volume buttons are much more pronounced, and easier to find by touch, then on the Diztronic case, but I didn't have any issues with the buttons on the Diztronic case, either.
Cut-outs for speaker, USB port, mic etc. are all there, and seem positions fine. The cut-out for the speaker seems to be positions a little bit low, or it's over cut, so that you do see not only the speaker but also just above the speaker when looking at the opening on the back, but this is the same with the Diztronic case.
Overall, it's a very nice case. Honestly, I'm waiting for the Seidio cases to come out, so I purchased both of these simply to tide me over and protect the DNA until next month, when (I hope) Seidio releases their case. I've owned a couple of Seidio cases and really like them!
Feel free to ask any questions... Photos were taken with my son's iPhone 5.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
crikeycrapper said:
I just bought the Ballistic Shell Gel Case on eBay for $20. I can't give the link coz it's my first post. I looked at the Diztronic case on Amazon, but at $20, it seemed that the Ballistic SG Case might be a better value. I guess I'll see when it arrives.
Click to expand...
Click to collapse
Received the Ballistic SG Case yesterday and so far, it's been pretty good. It was relatively easy to install, and it does seem to provide good protection to the device. It did peel the corner of my screen protector, but I was able to fix that and properly tuck in the corner of the protector under the edge of the case. To me, it does not add too much girth to the DNA. The SG case does cover up the rear LED indicator light. I'm not certain if I should pursue modification to this, I probably won't. The backside of the SG case is probably not as slippery as the Ballistic Life Style case, and it seems to offer more in the way of grip. I'm quite pleased with the Ballistic SG case for the Droid DNA.
http://amzn.com/B00AB7VT8Y
Green Androidified A2 Case for HTC Droid DNA
by CruzerLite
I don't normally promote accessories I buy, but I'm going to start so it hopefully answers other's questions. So I bought this case earlier in the week since i work in a dirty and hazardous (to phones) area. I have to keep my phone on me but i always run the risk of dropping it or crushing it. I can't stand using a large bulky case such at the Defender series even though they are robust and perfect for where i work. I like to keep my phone in my pocket so a slim case is perfect. I tried using a skin but i still wanted that extra guard from a rubber case. This case is very tight. Could have been because i have a carbon skin on my phone already but i definitely liked how it fit on the phone. I also had to be very careful cause the corners took the screen protector off. It didn't have raised buttons on the case which was a downfall as it would make it a bit more functional for the average user. However, most DNA users will ether have the USB cover broken off or will use a wireless charger. My wireless charger worked perfect with this case as well.
If you want a case similar to this then go for it. i have no complaints
S121Guy said:
]
Green Androidified A2 Case for HTC Droid DNA
by CruzerLite
I don't normally promote accessories I buy, but I'm going to start so it hopefully answers other's questions. So I bought this case earlier in the week since i work in a dirty and hazardous (to phones) area. I have to keep my phone on me but i always run the risk of dropping it or crushing it. I can't stand using a large bulky case such at the Defender series even though they are robust and perfect for where i work. I like to keep my phone in my pocket so a slim case is perfect. I tried using a skin but i still wanted that extra guard from a rubber case. This case is very tight. Could have been because i have a carbon skin on my phone already but i definitely liked how it fit on the phone. I also had to be very careful cause the corners took the screen protector off. It didn't have raised buttons on the case which was a downfall as it would make it a bit more functional for the average user. However, most DNA users will ether have the USB cover broken off or will use a wireless charger. My wireless charger worked perfect with this case as well.
If you want a case similar to this then go for it. i have no complaints
Click to expand...
Click to collapse
Is it any easier to press the volume, lock buttons than without the case since it outlines where they are?
I find it easier to find the buttons cause of the ouline of the case. But no easier to push them, about the same effort.
sent from my rooted DNA
I also have this case and I would agree with your assessment. The volume buttons are about the same to press, a little easier to find due to the cutout. The power button is still hard to hit and probably a little harder, I would have liked raised buttons.
I am a repeat customer of Cruzerlite for a reason. Quality and value, and this case is no different than their other products. It is very sleek and slides in and out of my pocket with ease. It does not attract pocket lint either. The back is clear and you can see the notification led through the case. I also like how Andy is on the back instead of some cheezy argyle pattern. Also it does not leave marks like the Verizon tpu case does, which I also own. My only niggle is I wish the cut out for the volume and power buttons were not cut out, as I feel like it does make it easier to push the buttons as they are really flush. The vzw case doesnt have the volume cut outs but its not a deal breaker by any means. At least the holes are big enough to smash your thumb through.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's my black one.
Despyse said:
Here's my black one.
Click to expand...
Click to collapse
I like that one better than the green.
sent from my rooted DNA
Got case too. Perfect fit.
Sent from my HTC6435LVW using xda app-developers app
I got my red DNA and Orange case coming on Monday, should be a nice clash. Everyone liking the case so far?
Now where did you get that idea?! Lol
sent from my DNA Employee Edition 04271
They have a buy two get one free special now. White, teal, and red will be here on Monday.
Sent from my HTC6435LVW using Tapatalk 2
androidoholic said:
They have a buy two get one free special now. White, teal, and red will be here on Monday.
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
I'm a big Jacksonville Jaguars fan (yeah I know they forever suck) and the teal cruzerlite case looked pretty sick on my Rezound. I got a demo unit for DNA in green and I really hope they seal in the volume rocker port like the vzw tpu case its much better because how flush the buttons are. Also the power button sealed in would be nice. I would buy several cases if they did a revision until then I am sticking with the blue tpu from vzw.
Sent from my HTC6435LVW using Tapatalk 2
jreed2560 said:
Now where did you get that idea?! Lol
sent from my DNA Employee Edition 04271
Click to expand...
Click to collapse
It just came to me, lol it was a good idea. Stolen
Just got mine delivered buy 2 got 1 free. Red, black and clear. Love the case, but it doesn't ,"share" nicely with my zagg screen protector. The shield bubbles up on the sides. But I do love the case, adds virtually no bulk to the phone and feels great in my hand!
Sent from my HTC6435LVW using xda app-developers app
Hello all and thank you in advance for reading my post. I do my best to “pay it forward” when I can.
I recently just switched my service over to Verizon (love the service) and bought a Note 3 (love this phone). I was using an S3 with an Elago Breathe case. It was a great case but more for light duty use. The Note 3 is so nice I would hate to have it covered all of the time so I would like to swap cases based on my situation. The slim cases go on and come off easy but when you get into cases like the Otterbox they seem to be a “put it on and leave it on” type of a case. I just want something mainly for protecting against drop and slight bangs. I “think” the Otterbox defender would be overkill and very large. So out of the light to heavy duty cases what ones go on and come off easy?
Sliver108 said:
Hello all and thank you in advance for reading my post. I do my best to “pay it forward” when I can.
I recently just switched my service over to Verizon (love the service) and bought a Note 3 (love this phone). I was using an S3 with an Elago Breathe case. It was a great case but more for light duty use. The Note 3 is so nice I would hate to have it covered all of the time so I would like to swap cases based on my situation. The slim cases go on and come off easy but when you get into cases like the Otterbox they seem to be a “put it on and leave it on” type of a case. I just want something mainly for protecting against drop and slight bangs. I “think” the Otterbox defender would be overkill and very large. So out of the light to heavy duty cases what ones go on and come off easy?
Click to expand...
Click to collapse
I hate the big and bulky cases as well so my most recent case purchase was the Tech21 Impactology I picked it up from Tmobile store it was pretty pricy came to about $37 after taxes but you can get it on Ebay much cheaper...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sliver108 said:
Hello all and thank you in advance for reading my post. I do my best to “pay it forward” when I can.
I recently just switched my service over to Verizon (love the service) and bought a Note 3 (love this phone). I was using an S3 with an Elago Breathe case. It was a great case but more for light duty use. The Note 3 is so nice I would hate to have it covered all of the time so I would like to swap cases based on my situation. The slim cases go on and come off easy but when you get into cases like the Otterbox they seem to be a “put it on and leave it on” type of a case. I just want something mainly for protecting against drop and slight bangs. I “think” the Otterbox defender would be overkill and very large. So out of the light to heavy duty cases what ones go on and come off easy?
Click to expand...
Click to collapse
I use the seidio surface, its a hard case Ive dropped my note twice on pavement and no problems other than the case having a little scuff mark.its also raised slightly to protect the camera..
http://www.seidioonline.com/samsung...ekickstand-combo-black-p/bd2-hr3ssgt3k-bk.htm...
I also switch out batteries daily so the case is quick to come off and put back on.
ckessler235 said:
I hate the big and bulky cases as well so my most recent case purchase was the Tech21 Impactology I picked it up from Tmobile store it was pretty pricy came to about $37 after taxes but you can get it on Ebay much cheaper... View attachment 2672631
View attachment 2672632
Click to expand...
Click to collapse
Neet looking case..what is their niche?
Sent from my SPH-L710 using Tapatalk 2
TPU case...
Sliver108 said:
Neet looking case..what is their niche?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Just any TPU case from ebay, which can be very inexpensive...will do the job and not give you problems when it comes to battery removal. I am using a goospery case....in red. I love it! My idea is that if you drop your phone anyways, you might be screwed...so HOLD onto it. Get square trade insurance...and you're good to go! Just MY two cents!!!
Check these out! http://www.ebay.com/itm/Goospery-Co...Cell_Phone_PDA_Cases&var=&hash=item338638b7e8
http://www.ebay.com/itm/For-SAMSUNG...Cell_Phone_PDA_Cases&var=&hash=item5af5e0b41c
Both offer a bit of protection from falls, and great protection for your daily usage.
aCeMaN2001x said:
I use the seidio surface, its a hard case Ive dropped my note twice on pavement and no problems other than the case having a little scuff mark.its also raised slightly to protect the camera..
http://www.seidioonline.com/samsung...ekickstand-combo-black-p/bd2-hr3ssgt3k-bk.htm...
I also switch out batteries daily so the case is quick to come off and put back on.
Click to expand...
Click to collapse
Nice, is that comparable protection wise? I like that case but I have heard mix reviews about the rubber on it. What have you seen?
This is one of my personal favorites, its a mix of TPU and a hard shell that is wrapped around it. The fit and finish is excellent and its not too bulky. The case also comes off in one piece and goes on just by popping your phone into it.
Spigen Slim Armor:
http://www.amazon.com/Spigen-SGP104...4506&sr=8-2&keywords=spigen+note+3+slim+armor
jreed3786 said:
Just any TPU case from ebay, which can be very inexpensive...will do the job and not give you problems when it comes to battery removal. I am using a goospery case....in red. I love it! My idea is that if you drop your phone anyways, you might be screwed...so HOLD onto it. Get square trade insurance...and you're good to go! Just MY two cents!!!
Check these out! http://www.ebay.com/itm/Goospery-Co...Cell_Phone_PDA_Cases&var=&hash=item338638b7e8
http://www.ebay.com/itm/For-SAMSUNG...Cell_Phone_PDA_Cases&var=&hash=item5af5e0b41c
Both offer a bit of protection from falls, and great protection for your daily usage.
Click to expand...
Click to collapse
These would be perfect when I need light light duty...thanks.
Sliver108 said:
These would be perfect when I need light light duty...thanks.
Click to expand...
Click to collapse
Always welcome! TPU is the only kind I've ever used on any phone and luckily, I've never regretted it!
Pilz474 said:
This is one of my personal favorites, its a mix of TPU and a hard shell that is wrapped around it. The fit and finish is excellent and its not too bulky. The case also comes off in one piece and goes on just by popping your phone into it.
Spigen Slim Armor:
http://www.amazon.com/Spigen-SGP104...4506&sr=8-2&keywords=spigen+note+3+slim+armor
Click to expand...
Click to collapse
How would this compare to the Commuter series?
Sliver108 said:
Nice, is that comparable protection wise? I like that case but I have heard mix reviews about the rubber on it. What have you seen?
Click to expand...
Click to collapse
I haven't had any problems with protection so far, but I do have two little scratches where I have dropped it, but no rubber peeling and no problems with the felt on the inside of it either.
Just purchased the Trident Aegis case from amazon for $18 and it rocks! rubber surround, with plastic backing (hybrid) superb protection, free sp. does not add too much bulk, and it looks great, Will post pics if you want me to. I have always used Trident cases and they are awesome, oh and it comes off easy too. I got the green one
http://www.amazon.com/dp/B00HFPBZDE/ref=twister_B00HQE10EI
Sliver108 said:
How would this compare to the Commuter series?
Click to expand...
Click to collapse
In terms of protection it doesn't. Commuter is the stronger case and also has a much better lip to protect the screen. That being said the commuter also makes the phone twice as thick whereas the slim armour is a bit more svelte. The slim is also easier to take on and off from the phone although the commuter isn't that difficult, it's just that you have to do it in two pieces.
Sent from my SM-N9005 using Tapatalk
Hey guys finally ditched the samsung camp and got myself a Nexus 6 for relatively cheap here in the uk, xpansys selling for £250 with a free Google Chromecast.
Initially I was over come by the sheer size of this phone,and in now pretty worried that I'll drop it or "scuff" the soft touch case.
Anyone able to recommend a slimline but smart looking case & screen protector that doesn't take away from its looks? Thanks guys.
Sent from my Nexus 6 using Tapatalk
Davies_90 said:
Hey guys finally ditched the samsung camp and got myself a Nexus 6 for relatively cheap here in the uk, xpansys selling for £250 with a free Google Chromecast.
Initially I was over come by the sheer size of this phone,and in now pretty worried that I'll drop it or "scuff" the soft touch case.
Anyone able to recommend a slimline but smart looking case & screen protector that doesn't take away from its looks? Thanks guys.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Best I've found over the past year:
http://www.amazon.com/Ringke-Essential-Protector-Scratch-Resistant-Protective/dp/B00O152P7G
The SF Black has a nice soft touch to it and it comes with a screen protector. I'm sure there are better protectors on the market but for an all in one package it's tough to beat. Only gripe is that I wish it had the Moto dimple cut out. That would make it perfect for me.
Third one looks good ?.
http://www.amazon.com/gp/aw/d/B00O1..._UL100_SR100,100_&refRID=0P1DNPDSFM0S63BC17M7
Sent from my Nexus 6 using Tapatalk
just run mine naked - love the looks of the phone
The incipio dual pro fits this beast well and has a nice grippy feel to it
I'm using Nillkin Frosted Shield case. Really slim and gripped so it's not slips from the hand. I don't really know if it's protects from dropping, but I don't really care about it because I'm really careful with my devices and I have tempered glass on it.
I got two different ones and use them both (not at the same time) depending on the need for the day.
The first one is really nice/inexpensive and since I got clear it doesn't affect my original color choice for the phone (which is white). It came with a free screen protector but despite rather significant experience at applying protectors this one didn't go so good so I removed it and now I'm just going without, but that's mostly because I use the second case most of the time.
https://www.amazon.com/gp/aw/d/B00SX1NNJI/ref=ya_aw_od_pi?ie=UTF8&psc=1
The second one is a larger pouch case and it's my favorite because it allows me to keep the phone naked so it will fit in the Proclip custom mount in my truck. I can still easily hear alarms, notifications, etc with the phone in this case. It protects the screen and the whole phone very well. It's a little pricey but really good quality/construction. My phone is in this case like 99% of the time.
https://www.amazon.com/gp/aw/d/B015HD74YO/ref=ya_aw_od_pi?ie=UTF8&psc=1
This is what I'm rockin' and I love it.
Even has a hole cut out for the Moto spot....
http://www.amazon.com/gp/aw/d/B00OH...=SL75_QL70&keywords=otterbox+defender+nexus+6
totallybeachin said:
This is what I'm rockin' and I love it.
Even has a hole cut out for the Moto spot....
http://www.amazon.com/gp/aw/d/B00OH...=SL75_QL70&keywords=otterbox+defender+nexus+6
Click to expand...
Click to collapse
The OP was looking for a slimline case. That's the total opposite, probably the biggest case you can get for the N6. The Ringke Fusion is probably the one the OP wants. http://www.ebay.com/itm/Ringke-FUSI...hash=item3aad336132:m:mm5wuDQt5cp30pfU-E1_3cQ
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My bad!
Missed that part somehow!
I have several spigen cases for my Nexus 6 along with a caseology one. No issues with any of them so far
Sent from my Nexus 6
http://www.ebay.com/itm/Orzly-Flexi...512855?hash=item2355b0e997:g:GNwAAOSwNSxVCa13
This is hands down the thinest quality case you can get for our phone.
There were a couple of links in this thread for Ringke cases and I would absolutely agree. Ringke cases are superb.
Also , if you are looking for a tempered glass screen protector then look no further than this :
intelliarmor.com/shop-by-device/nexus-6/intelliglass-pro-nexus-6-the-smarter-real-glass-screen-protector.html
slider112 said:
Best I've found over the past year:
http://www.amazon.com/Ringke-Essential-Protector-Scratch-Resistant-Protective/dp/B00O152P7G
The SF Black has a nice soft touch to it and it comes with a screen protector. I'm sure there are better protectors on the market but for an all in one package it's tough to beat. Only gripe is that I wish it had the Moto dimple cut out. That would make it perfect for me.
Click to expand...
Click to collapse
Lol, I just received this same case yesterday. While I love the thin design which covers all 4 sides and back I wouldn't trust it in a drop from any distance. But then again I don't what something too thick because I also carry a iPhone 6s. Just couldn't pass up on a $200 Nexus 6.
I've got all three spigen cases, and supcase beetle. I really like the Spigen Ultra Hybrid gunmetal case that I have the best...
mtalbert63 said:
I've got all three spigen cases, and supcase beetle. I really like the Spigen Ultra Hybrid gunmetal case that I have the best...
Click to expand...
Click to collapse
I have the spigen one. Awesome case. The supcase looks pretty nice as well
Sent from my Nexus 6
I think the ballistic tough jacket is pretty nice. It feels solid in the hand, good build quality etc (6ft drop protection on 6 sides bla bla bla)
https://www.goballisticcase.com/shop/motorola/nexus-6/
I paid $14 for one on Amazon. Thing looks beast. The power and volume buttons are responsive as well. Probably my favorite case
Anyone try this case:
http://www.aliexpress.com/item/High..._78_77_80,searchweb201644_0,searchweb201560_1
Meowdib said:
Anyone try this case:
http://www.aliexpress.com/item/High..._78_77_80,searchweb201644_0,searchweb201560_1
Click to expand...
Click to collapse
I ordered the same case but in blue, I haven't received it yet but should be this week sometime
Sent from my Nexus 6
totallybeachin said:
This is what I'm rockin' and I love it.
Even has a hole cut out for the Moto spot....
http://www.amazon.com/gp/aw/d/B00OH...=SL75_QL70&keywords=otterbox+defender+nexus+6
Click to expand...
Click to collapse
I see that the holster for this case is a snap in holster and not a slide in. Does the holster allow for the phone to be attached screen out?