Related
Does the Invisibleshield cover the whole phone or is it just a screen protector?
It covers pretty much the entire rear and the screen. There is no cover for the 'frame' of the front.
IMHO It's very tough, quite tricky to put on the back (of an XDA Mini S with textured surface) and would have been better if it covered the exposed front parts (but I guess the various button and LEDs get in the way).
Re: Does the Invisibleshield cover the whole phone or the sc
The Invisible shield comes in two styles. One is for the whole phone the other just for the screen. I have a Cingular 8125 with the whole phone style. The kit comes in precut pieces which you apply to various areas of the phone. So it offers a fair amount of protection but does leave some gaps. The screen cover is the best I have ever used.
dropknowledge said:
Does the Invisibleshield cover the whole phone or is it just a screen protector?
Click to expand...
Click to collapse
I had also seen these on Ebay and was wondering if anyone had used it.
The "infomercial" has sold me on it, but I really wanted to get some opinions from others who bought it and used it before I took the plunge.
So, even if just the screen protector does the job, it would be money well spent??
I had also seen these on Ebay and was wondering if anyone had used it.
The "infomercial" has sold me on it, but I really wanted to get some opinions from others who bought it and used it before I took the plunge.
So, even if just the screen protector does the job, it would be money well spent??
newbie2 said:
I had also seen these on Ebay and was wondering if anyone had used it.
The "infomercial" has sold me on it, but I really wanted to get some opinions from others who bought it and used it before I took the plunge.
So, even if just the screen protector does the job, it would be money well spent??
Click to expand...
Click to collapse
Yes, the screen protector is worth the money. I would suggest buying directly from their website. They do not charge for delivery as they do on ebay
invisible shields are THE BEST screen protectors hands-down. I have been using them for ipods, cameras, and all my phones. It's always the first accessory I buy. I'm using one on my 8125.
Easy to put on, doesnt scratch, STRONG, and wont leave a residue if you choose to remove it- which you never will do and it will never come off, either. Plus they have a lifetime guarantee. Highly recommended for any gadgets.
Best piece of gear hands down. I have the "Full Body" on my 8125 and just a screen protector on another. I bought direct since I live here in Salt Lake City, UT. As for somebody saying it never comes off once it is on us untrue. Just respray it and carefully lift an edge and it will come off. :wink:
RE: Does the Invisibleshield cover the whole phone or the s
I just tried to put mine on today, and it didn't cover the entire screen. It's like alot of screen protectors that I've used in that it leaves a 1-2 millimeter gap around the edge. I decided not to use it, and opted to use my WriteShield screen protector that I got from PocketPCTechs. I've tried their AG and C* (clear) screen protectors, and the C* screen protector is the clearest screen protector I've ever seen. And it cover the entire screen of the 8125.
Having said that, I went ahead and put the rest of the InvisibleShield protectors on the rest of my 8125 and I like it. I've got and IS on my IPOD also, and it does a pretty good job.
However, removing is does leave some residue. Like the one for the 8125 the IPOD version comes in multiple sections, and I didn't like the placement of a the pieces that go over the circular sections of the IPOD, so I decided to remove them and maybe try to re-apply them. When I pulled them off, they left a gummy, glue like residue. I did manage to clean it up with some GooBGone. I'm not sure if I'll be able to re-apply those pieces or not since they are not "clear" any more. Maybe there's a way to wash them or something to clean them up.
I may have done something wrong (and if I have, someone please tell me what it was cause I realy like the IS for my IPOD), but I couldn't find anything on their website which gave any instuctions for removing.
Does the 1-2 mm gap around the edge really make a huge difference?
RE: Does the Invisibleshield cover the whole phone or the s
It does to me. Invariably I would always slide of the edge with the pen. Plus it's kinda noticible when you look at it. It's more of a personal thing really. If you're OK with it, then I think the protector that comes with the IS would be a really good one. I just like to have to whole screen covered.
You do know you can order the IS a custom size to fit your needs.
Here's my review of the Invisible Shield, which I installed onto my 8125 earlier this week.
The quality of the material is excellent. I have no doubts this will save my entire phone from bumps and bruises. However putting the stuff on left me hating and liking it at intervals during the "ordeal". Unless one has steady hands and lots of patience it would be nearly impossible to put the pieces on without getting your finger prints on the underside of each piece. The adhesive is seriously good.
I did manage to get all the pieces on, after about 90 minutes. I did have to rinse the screen cover several times in order to clean the underside of smudges left by my fingers. I also had to lift a corner once to take out a bubble that just would not come otherwise. Even at that I was not impressed with how the screen looked immediately after applying it. But now, 4 days later I have to say that the claims of the bubbles working themselves out over time are entirely accurate. The shield is now crystal clear and undoubtedly a good protective device.
The material also has the characteristic of making the phone very grippy. I like that about it. What I don't like so much is that there are many pieces, and you can feel the edge of each one when you hold or handle the phone. This is because the material is thick, and that helps to provide the protection, but it takes some getting used to. The grip can be felt when using the stylus as well, but fortunately the digitizer on the screen is very sensitive so a light touch works well, and this minimizes the drag created by the material.
My final impression is that the kit is worth the money. It will protect the phone from all but the most careless handling, or serious accident. It is nearly invisible and makes for a better, albeit edgy, grip. I wouldn't want to apply it again, but then I shouldn't have to given its toughness. Perhaps next time I'll pay someone else to apply it for me. ;o)
Invisible Shield
FYI. I purchased mine (full cover) for my 8125 at a mall kiosk. They guy asked me if I wanted him to install it as it is tricky.
I have little patience for such things (like airplane models), so I had him install it for $5 extra.
It was WELL WORTH IT!!! The install was top-notch and I am very, very happy.
Could someone post the picture (front, back, side) of the MDA or 8125 with invisibleshield in it. I know that it might be difficult to see it clearly since the shield is almost invisible. Could someone put some arrows in the picture on where the shield is applied. I would like to see which area gets covered before buying it. TIA.
I contacted the seller and asked for the picture. But they don't have it.
Also, once you apply the invisibleshield, can you safely carry the MDA naked in a purse together with all kinds of stuff such as keys, pens, notes, etc?
I'd like to see some photos as well
R
rob61280 said:
I'd like to see some photos as well
R
Click to expand...
Click to collapse
Yea me too but looks like nobody has any picture worth looking
Hi All,
I'm looking for opinions on screen protectors. Which is the best for the G-Tab in your opinion and why? I see Skinomi has some specifically for the G tab, are they any good? What are you thoughts?
If you use the search feature, you will find talk about this subject. Then you will not need to start a brand new thread in the wrong place.
I got a skinomi and I love the carbon fiber protective back the most, it adds a ton of grip to the back and sides. The screen protector is good but its a wet application and is a little hard to do. You also can't use your gtablet for at least 4 hours after application. I let it sit over night and it was still a little weird for the next day. After 4 days it was perfect. I ended up with 2 specs under the surface but its almost unavoidable unless you have a clean room and body suit to apply it. The self healing aspect is totally cool. I scratched the protector with my keys on accident and all I had to do was get it. A little hot with a hair dryer and buff it out with the cleaning cloth. Over all happy with the company and product even though the first screen I was sent had surface artifacts and ridges. I received a free replacement within a week.
Go to http://electroniccrap.com/store/index.php?main_page=products_new you wii get the one you want
1 for the Skinomi
You can't beat the price, nor the durability of the skinomi protectors (and in general the skin protectors like ZAGGs, BSE ..), its no where comparable to the plastic stick-me-on sheets.
The Skinomi is even cheaper than the plastic one linked above
You don't have to freak out about the installation, if you can read/see and follow instructions there should be no room to do it wrong (some people try to smart it out and that way doesn't usually work)
There is a whole thread about it here.
Do you think the plastic sheets would servive that ? Think again
So... On my phone i always use those plastic film thingies because a smartphone is something that i take everywhere with me and put it in different locations like pockets, backpacks etc. Other stuff can be in those pockets so scratches are definately a possibility. I just dont feel comfortable without it and they dont bother me at all while using the phone.
But on a tablet like the prime its a whole different story. When I use it I sit somewhere, comfortably and safe. When i take it with me it's in its neoprene sleeve. Also i usually take the dock with me, and when its docked the screen is automatically protected...
The Prime has even Gorilla glass so i dont plan on putting anything on it. This is my first tablet so you guys may have more experience with it... Your thoughts? The glass feels just so awesome to the touch, i dont think a protector can replicate that.
So do you plan on putting a protector on it?
Btw1: i really dont care about scratches on the back^^ It gives the device some personality! Its the same with books for me. Hate it when they are new and shiny. Feel free to comment on that as well
Btw2: Maybe this thread should be in the Accessory forum? This is a general discussion though - i think? Mods, do what you have to do.
I was thinking the same about the screen protector, but the IPS feels so good that i think I'm just going to get the sleeve.
Sent from my Transformer Prime TF201 using xda premium
i bought one and it was near impossible to get it on without dust or something under it. thats a huge area to try to get dustless even in just a few seconds
i havent been using one, i just rub my tfp against whatever cotton shirt i might be wearing, that cleans the screen and i havent had any scratches.
i use a leather folio style case, so the screen is usually covered for the most part, i just use my shirt to get finger prints off lol
I have a dry application crystal clear screen protector and I love it mostly because it doesn't collect fingerprints and smudges as easy and is easier to wipe clean if anything this is worth it alone plus you don't have to worry about a accidental scratch somehow.
I don't and won't be using one. The tablet has gorilla glass and is very durable. My phone also has it and that goes all sorts of places and has remained scratch free. Considering my tablet is only at home loose otherwise always in the dock which then goes in the neoprene case, I have no desire to put one on and am not going to worry about it.
Prime has gorilla glass. I don't have one n my screen looks great. Veryyyy scratch resistant. Plus it cleans off so easily with the included cloth. All screen protectors do is degrade screen quality n throw off touch response.
http://gizmodo.com/5880520/stop-ruining-your-phone-with-a-stupid-case
no phone/tablet is designed to be used with a cover/skin, except iPhone 4
im glad my galaxy s2 is "free" after having a cover for 2 weeks..
// --
I know the link is about cases, but still think its in the same categori!
I took my prime down to the invisible shield stand in the mall to get a screen protector. hen I got there they said because the device was so new they didnt have anything for it. But because it was a TFP the guy offered to custom cut one for me.
Say what you want, but I got mine done without even a fleck of dust under it and it offers no distortion of my screen, nor do I notice any sensitivity loss. Not only that but I find its way easier to clean.
Besides who knows whats gunna jump out of nowhere and try and scratch your screen.
screen protector I have does not throw off sensitivity at all I was worried it would but it didn't just as responsive.
It may be false sense of security, but I have the skinomi protection on mine. Just in case. The screen is beautiful and I don't want anything to happen to it.
Yes. I liked the feel of it better without the screen protector. But I've not noticed any degrading of color, etc. There are 2 specs of dust that got underneath that are driving me MAD and that may end up being why I take it off, maybe. But overall its better because no finger prints and less worry.
But not as nice to touch
I've had my desire for nearly 2 years and there isn't a mark on the screen dropped at a few times too, great big dent on one corner but no scratches. Them corner protectors but probably a good idea but not worth trying to get a screen protector on.
Sent from my Transformer Prime TF201 using two cups and a piece of string.
I use a protector, feels as good as the glass screen.
Sent from my LG-P990 using Tapatalk
rsarno said:
i bought one and it was near impossible to get it on without dust or something under it. thats a huge area to try to get dustless even in just a few seconds
i havent been using one, i just rub my tfp against whatever cotton shirt i might be wearing, that cleans the screen and i havent had any scratches.
i use a leather folio style case, so the screen is usually covered for the most part, i just use my shirt to get finger prints off lol
Click to expand...
Click to collapse
Take a shower and install the screen protector in the bathroom when it is still humid. Works like a charm to install screen protectors dust free.
Sent from my Transformer Prime TF201 using xda premium
IMPORTANT DATA. Please read
Guys, I want to bring this to your attention so what happened to me doesn't befall you:
The Gorilla Glass, while tough, can be scratched quite easily under the right conditions. I was in a thread a few weeks agao, being all smart (like my Username, LOL!) saying that a screen protector was a waste. a) Because they make a beautiful screen something "less beautiful" b) that they are difficult to place on the glass properly, and c) My biggest pout: Anything that is sharp enough, hard enough, and strikes with enough force or velocity to scratch, chip or otherwise damage Gorilla Glass will likely not have any less impact from a piece of plastic between the glass and the projectile.
In other words, if something is going to damage the hardened glass, how is a decidedly super thin piece of plastic going to stop it?
In retrospect, I was very wrong, or at least partly wrong. That very night my daughter sat with me playing games on the Prime. We played a few games together: Where's my water, and similar. Then I played Need For Speed, and then she played Fruit Ninja.
When I went to clean all the 11 year old finger prints off, I noticed what looked to be scratches in the glass. At first I thought it was just debris from sticky fingers, but no... it was... HOLY **** THE GLASS WAS FREAKING SCRATCHED RIGHT THE **** THROUGH!!!!!!
Seems she had a cheap metal ring on, with a split back that lets you adjust the size. By holding the tablet in portrait, and not hard or in any way roughly, she scratched the glass on the right side of the camera, a 1" wide SET of scratches, not one or two, but a swirl of perhaps 12 or 15 scratches that were deep enough to be basically impossible to remove.
I tried to see if there were any methods to polish this out. including seeking help from a glass polishing co, and optometry tools and materials. All advised against it, and the amount of sanding, and polishing needed would have put an obvious "dent" in the glass that would make it no longer true or flat.
Fortunately I had insurance, and for a $125 deductible I was able to replace the unit. Lesson (a huge one) learned. Lesson I am trying to pass along? BE CAREFUL. Check EVERYONE who uses the the tablet to make sure they have no rings or jewelry. If a screen protector makes you feel more comfortable, b all means get one, and keep it on there, there are two types, the rubbery "sticky" ones that I hate, since your finger stick and won't slide on it very well, and the harder, shinier material (actually comes in an anti reflection satin finish too I believe).
No matter what you decide remember, if something looks like it could scratch the glass, don't take chances with it. better safe than hugely sorry. Also, while Gorilla Glass IS scratch resistant, it is NOT BREAK RESISTANT. When I saw the damage to my screen, I admit, I actually was close to tears... No ****.
Be careful out there.
Thx for your input man So i guess if i ever have a daughter i get an iPad to play games with her. It'll be fun to watch how she takes it apart and scratches it all over the place.. MUAHAHAHHAHAHhahhaaaa!
In a word: Yes.
Not so much for protection though but to minimize reflections and fingerprints.
While losing a tiny bit of sharpness and color the display is much more readable under any circumstances. No need to "wash" off fingerprints every 10 minutes, no need to hold the tablet so no lights are reflected right where I want to read something onscreen.
I use this one:
http://www.danto.de/onscreen-schutzfolie-fuer-asus-eee-pad-transformer-prime-typ-non-reflecting.html
Since a tablet screen is much bigger than that of a smartphone applying it has to be done cautious and calm. To get rid of any particles between screen and protector I used TESA stripes to pull the protector off a bit and then another one to remove the particles.
Good idea with the shower, though.
demandarin said:
Prime has gorilla glass. I don't have one n my screen looks great. Veryyyy scratch resistant. Plus it cleans off so easily with the included cloth. All screen protectors do is degrade screen quality n throw off touch response.
Click to expand...
Click to collapse
I concur. A screen protector isn't necessary for normal use. Also, you might have some issues docking it with a protector on.
i dont see any point to use screen protector, its not small device like regular cellphone which may be accidently put in same pocket as your keys and therefore scratch your screen. I use mine mostly with dock, so when its closed its protected by dock, and while not having it docked i use leather case from ebay. And afterall it has gorilla glass should be durable
IMO, no, it does not need one, but it never hurts to be safe. I've no case for mine yet, and am about to have a Skinomi skin to throw on it, and have been using it for only three days. My screen is perfect, I'm a neat freak and keep it spotless, keeping a cloth on hand and using a stylus. However, a case/skin for the back most certainly is needed if you don't like scratches. I don't mind them, my phone is covered in dings and scratches and gouges, but the screen is fine with a protector.
In short, no, it doesn't really need one, but yes I'll be using one. Damned if I'll accidentally hit my jacket zipper too hard or something retarded.
Like the above poster said, does it NEED a screen protector, no. But lets be realistic, people give gorilla glass way too much credit thinking that its invincible. If the tab is always in an immaculately clean place, then you have nothing to worry about. But a lot of dirt particles also have tiny particles of sand in it, which easily scratches glass. Key tests are just useless propaganda. Its little sand particles and other small minerals found in dirt that will scratch your screen, which is how most peoples phone screens get scratched without them realizing. Dirt and dust are everywhere. But if you're careful enough, you can minimize the issue. Personally, I spent $500 on a device so I feel an extra $10 to protect the screen against scratches and preserve resale value isn't much to ask. Also, Skinomi has a screen protector that has a cutout for the dock, I highly recommend it,its super clear.
Long story short, you don't need one if you're going to be careful enough. But don't fall for marketing hype and think that gorilla glass is indestructible. It actually marks up pretty easy (especially if theres a coating on top of the gorilla glass). I put screen protectors on my devices so I don't have to baby them. If i'm always worried about scratches, I can't fully enjoy it.
Who among you have tried both a wet- and dry-installation screen protector? Which do you prefer?
In searching through these threads, the only wet-installation I've seen mentioned by name is the skinomi. Are there others?
I *think* I want a wet-installation, plus matte, glare-reducing protector, but I will be waiting to see the results of this survey...
I haven't tried the dry type on the Flyer, but had plenty of them on my past phones. Now its all wet apply for me. They are much easier to apply. You can "slide" the protector around a bit to get the position just right before you squeegee it in place. With dry type, you pretty much have to stick it on the correct location right off the bat, otherwise you have to take it off and try again.
Also, not sure why, but for some reason I've had much better success getting a flawless install with no dust under the protector with The wet type. With the dry type (and I tried a few) it took quite a bit of practice and care before I could get a decent installation. Even then, there was usually a speck of dust or 2 under the protector, that I decided to live with. With the wet type, the first one I ever did was effortless and dust free, as were the couple subsequent installations on other devices. No idea why the wet apply method makes a difference on this, but it seems to.
Applying these screen-protectors is such a PITA.
Darn i never ever got a fully clean PERFECT application. (some lint or air bubble always gets in). Its more difficult for applying to large size screens.
I bought 4 screenguards (some 4$ each) alongside my flyer..as i knew i would never be able to do a clean install.
1st application was a bummer. As of now, i am on 2nd one and looking to replace it(has artifacts beneath & is worn out now) with 3rd
Can anyone point to some good instructional videos or guides?
i'm using dry method... haven't seen the wet method but i think it makes easier to install
I've only tried the dry ones, they are a PITA to install but they've held firm once they are set. Wonder if the wet ones are as durable.
Sent from my HTC Droid Incredible 2 using Tapatalk 2
I did a 'wet' install using the official Flyer screen protectors. I can't remember what happened but I started off with a dry install, took off the protector and washed it and after splashing off the excess water, put the screen onto my Flyer. I'm assuming it wouldn't be as smooth or slippery as official wet install protectors (I didn't have any of that slippy solution, just water) but it worked out just fine. The screen looked like it had wet marks for a day or so but it dried fine afterwards. I've also done with 'wet' install on other dry screen protectors and devices. No water damage if you are careful and use your common sense!
Hey all, I know this is probably the same order that everyone else is looking for, but I also know that new product is released probably every week. I'm looking for a dry film that I can buy for relatively cheap (>$15 at the absolute maximum but usually not willing to spend more than $9) for the regular S7. I use a Spigen Neo Hybrid with the lip around the front so it has to be case friendly or at least work with that case. Also, I would prefer it especially for film if I at least got multiples in a pack, if I wanted to spend $10 on one protector I'd just try fiddling with glass again.
I'm currently using the Spigen Curved Crystal which is almost disgustingly brittle and scratches too easily. If this was just more durable it would be perfect. It always seems like there's one major drawback for every product so far.
Also, please don't suggest wet-apply ones like ArmorSuit, IQ, etc. I've tried them, and even in a steamed room I always end up with dust underneath, and at least with the dry ones I can get it with tape. With the wet ones no matter what I use - tape, even my own fingers with solution on it, I can't get it out and just cause more to go in. No more wet protectors, I can't do them. The reason I had to pass on the Edge which I otherwise liked more was because the only protectors that work for it are wet apply and I know I can't put them on.
Akira Takamedo said:
Hey all, I know this is probably the same order that everyone else is looking for, but I also know that new product is released probably every week. I'm looking for a dry film that I can buy for relatively cheap (>$15 at the absolute maximum but usually not willing to spend more than $9) for the regular S7. I use a Spigen Neo Hybrid with the lip around the front so it has to be case friendly or at least work with that case. Also, I would prefer it especially for film if I at least got multiples in a pack, if I wanted to spend $10 on one protector I'd just try fiddling with glass again.
I'm currently using the Spigen Curved Crystal which is almost disgustingly brittle and scratches too easily. If this was just more durable it would be perfect. It always seems like there's one major drawback for every product so far.
Also, please don't suggest wet-apply ones like ArmorSuit, IQ, etc. I've tried them, and even in a steamed room I always end up with dust underneath, and at least with the dry ones I can get it with tape. With the wet ones no matter what I use - tape, even my own fingers with solution on it, I can't get it out and just cause more to go in. No more wet protectors, I can't do them. The reason I had to pass on the Edge which I otherwise liked more was because the only protectors that work for it are wet apply and I know I can't put them on.
Click to expand...
Click to collapse
Sadly Only Wet Install Films are of decent quality on the S7 Flat. For wet install, just take a bath with the shower, there should be steam in the bathroom after that. You can then proceed to install it on the restroom, don't worry about moisture as the S7 is IP68 Certified
i use them soft TPU screen protectors that you need to apply without water just like them old screen protectors. i buy them of aliexpress for like 75 cents a piece. I can give you a few tips for when your installing it like make your hands a bit wet so no dust comes off and only pull down a little bit of the plastic so you can line it up and then pull of the rest.
I tried so many screen protectors but most of them glass one's are fingerprint magnetes so thats why i use them soft one.s
RiTCHiE007 said:
i use them soft TPU screen protectors that you need to apply without water just like them old screen protectors. i buy them of aliexpress for like 75 cents a piece. I can give you a few tips for when your installing it like make your hands a bit wet so no dust comes off and only pull down a little bit of the plastic so you can line it up and then pull of the rest.
I tried so many screen protectors but most of them glass one's are fingerprint magnetes so thats why i use them soft one.s
Click to expand...
Click to collapse
I ordered one of these it will take some time. How it is holding so far? Any complaints? On a scale of 1 to 10 rate your satisfaction. Thanks in advance
Mozdef32 said:
I ordered one of these it will take some time. How it is holding so far? Any complaints? On a scale of 1 to 10 rate your satisfaction. Thanks in advance
Click to expand...
Click to collapse
I love it! Think they are way better then those old plastic screen protectors. They feel better when you swipe over the screen and when i first put it on my screen i had lots of small bubbles that where impossible to remove but after a day or 2 they where gone by them selfs and love the abti fingerprint coating. So overal im very happy with this one and not bad for a buck 50 and it came with a screen protector for the back side also.
Anything on Amazon. I went through 5 different protectors before I found one that was actually edge to edge.
RiTCHiE007 said:
I love it! Think they are way better then those old plastic screen protectors. They feel better when you swipe over the screen and when i first put it on my screen i had lots of small bubbles that where impossible to remove but after a day or 2 they where gone by them selfs and love the abti fingerprint coating. So overal im very happy with this one and not bad for a buck 50 and it came with a screen protector for the back side also.
Click to expand...
Click to collapse
Can you share where to buy them? Thanks.
Sent from my SM-G930F using Tapatalk