[Q] Help to install apps into SD (stable method) - Galaxy Ace S5830 General

Hello to everyone;
To start with I suppose I must introduce myself:
My name is Manu from México and I am a proud owner of a Samsung Galaxy Ace since three months ago.
During this time I had played with it and its stock ROM with 2.3.4 from carrier Telcel, I rooted it and removed bloatware from the carrier, the result was really nice; even thou after some apps the internal space run out, and therefore the responsiveness of my phone also got cluttered.
About a week ago or so I decided to go beyond and flashed "CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7" so I tested it for a while and even thou I found many improvements, many bugs were unbearable for the phone use I’m used to; so I switched back to a Stock Rom and flashed "S5830SERKPO" with 2.3.5. and my regional modem.
In addition I did this process to Deodex + root "http://forum.xda-developers.com/showthread.php?t=1118048&highlight=DEODEX” the result in my personal opinion is very good, but I’m back to the beginning. IM RUNNING OUT OF SPACE FOR INTERNAL STORAGE AND THE PHONE STARTS TO ACT LAGGY
I have read about s2e, link2sd and darktremor a2sd; where is require to partition your SD (which I already have also done with CMW at no avail) and I have finally ended up with a program called Install Manager 3.5.1 which promises to do move apps to SD (as far as they are executed locally from an .apk file and not market)
So... after this entire intro, and to avoid any flaming against me: I have read many many posts and have ended up overwhelmed and more confused.
¿Can someone please help me into the best way (in terms of stability and performance) to manage my apps to the SD card with a stock ROM?
(If possible a detailed explanation please, remember I have Stock "S5830SERKPO" with 2.3.5. and my regional modem)
Thanks a lot.

Also let me say I had read this post:
http://forum.xda-developers.com/showthread.php?t=1172684
But I get lost into "make sure the rom supports it" and therefore not sure if this applies to S5830SERKPO 2.3.5

Well, seems that my post is getting to much attention yet... still, I have an update; today during the course of the day, two times the phone screen turns off and it does not come back until I remove the battery.
The phone continues to work... (the radio still plays, calls continue, etc) just the screen turns off without any means to turn it on.
Hope someone can guide into how to find a better solution for my need.

Probably the easiest way to fix that is to install a ROM from the dev section (make sure it supports A2SD) Cyanogenmod is not official for our Ace, wich means lots of bugs, but other Customs Roms should be ok for you.
Create a ext4 and swap with CWM in your sd card (reboot into recovery, advanced, create sd partitions) Open the A2SD app and turn the swap on, move applications.

Related

2 Questions (MoDaCo 3.0)

Hello Guys,
I'm pretty new to all the Custom Rom things around here...
Yesterday I've installed the new MoDaCo 3.0 version for my hero, i had 2.3 or what so ever. I installed the rom, and then formatted my sd-card up to EXT4 via the adb tool. I'm sorry i can't remember if i first formatted or i first put on the new rom.
The thing is: in the List it says that Apps2SD is fully included in the update. I was not able to find the changes.... i tried it my self afterwards by installing the 2 files with a terminal, but the app2sd says its not working i should read the tutorial.(which i have) although it says 100mb space free now... and before the update all my progs filled up to 30mb.
So Q1: how do i install this version right?
and Q2: i still don't get any animations for my htc Clock (with the flipping pages) and i couldn't find any preferences. how do i get it to work? (and is there a prog where i can choose all my preferences, i get the feel i can't change all the things in the HTC-Preferences Dialog.
I Hope someone understands my problems ;-)
can you please state the exact error message from apps2sd?
it should work automatically on mcr. try to partition your sdcard again (btw i'd suggest ext2), then wipe and reflash mcr. that's it, the rest is taken care of. if you still think you have problems please search for it, there are numerous threads where i explained in details how you can check whether it is working or not.
as for q2: can also be covered by a search. in short: no animations any more.
thanks for the input, search actually did help me out for the clock problem ;-) (no possible on modaco hehe)
and I'll try the formatting and re-rom again, hopefully it works.
thx!
great place here

[Q] Questions about roms/ and some issues

Hello, I'm a new member here. Been reading for the past few days on this forum and I have a few questions.
First of all I have my phone for a month now and I got fed up with the little internal space, so about 4 days ago I decided to Root my phone with the "upd_1.zip" file. After that I flashed the CWM4 on it and whiped my battery data.
I meanwhile bought titanium backup also and moved few not so essential apps to the sd card via titanium backup (im not sure if this creates the needed partition on the SD card or not though? do i need to do it proprerly or is it good as is?)
To get to the point:
My main problem is that the phone since it got rooted started to "forget" it's settings... mainly what bugs me is the Contacts get unlinked every time i reboot the phone, accounts get unlinked, my adw launcher forgets it's theme (this also happens without reboot), my yahoo email doesn't notify me properly, and apps in general don't seem to work properly anymore... (i also thought it might be from the app move to sd card, but i left the launcher for example on the phone, also haven't touched the contacts app...so i don't know)
How can I fix this? Will a new ROM help me fix these problems?
If yes, can you recommend me any good roms? I was looking a lot at cyanogen mod and ice cream sunday, but i cannot decide which one to get because i'm not sure which one is the most stable one of them?
What matters most for me in a rom is probably to be stable without too many bugs, to run flash if possible and to be more responsive than my current stock 2.3.3 rom. I don't really use the stock apps/gps stuff either, except maybe the youtube app, camera and the market app
My other request is please someone write down how to install a damn rom for noobs without any abreviations because the developers' install description is really vague and abstract in many cases (for the Cyanogen mod or ICSunday please)
My phone runs:
S5840XWKP6
kernel
2.6.35.7-perf-CL313173
[email protected]#1
GB.XWKPJ
Thanks, Joker
Hello Mate
Whatever custom ROM you flash to will have a bug or two but they aren't anything serious thats just the thing with custom Rom's.
Installing Rom's is very easy as long as your phone is rooted (as you have already done) and you have CWM (clockwork mod recovery tool 5.xx not 4.xx) as you have said. There is a problem with CWM 4.xx with the Galaxy Ace it tends not to work properly.
All Rom's are downloaded from links on this website, copied to your SD card as a zip file (which it's downloaded as) then applied by using the CWM tool which appears in your apps after you have installed it.
There are lots of step by step instructions of how to do this just google "how to root galaxy ace" or "how to install CWM 5" or "how to install custom ROM" do you get my drift?
I'm using custom Ice cream sunday CM7.2 from the development section of this forum. It's fast got only what you need in a Rom and has hardly any bugs.
Do some reading my friend i've flashed my phone about 50 in the 2 months i've had it just testing ROM's but i like the one i have now.
Cool, thanks for the reply mate, do u have any idea about the problem i'm having lately by losing my settings?
I was asking for the how to flash guide because of statements like these:
"then install zip
after install, go through set up then set oc if you use and any other settings then reboot."
which makes no sense to me, go through what set up and what's an OC... and what other settings?.... get my drift?
And i'm currently downloading "theMyth" rom to test out... hope it turns out, it'll be my first custom rom
If your using clock work mod 4, it's not saving anything because it doesn't work with the galaxy ace i only found out after it messed up my phone and of course the back up of my settings didn't work!
OC means over clocked cpu application, yes you can over clock the cpu just the same as a pc or laptop make it run faster etc but it's not advised unless you know what your doing or you could fry it.
You definately need CWM 5 installed before you go flashing any new roms. Also have a good read of the reviews for a ROM before you try it etc that gives you all the info you need to know if you will get on with it or not.
uhm yeah... just flashed themyth on my phone and redownloaded titanium backup and it doesn't show up on my apps list, wtf
Make sure your installing apps to your phone and not your SD card??
Also check CWM has changed to version 5xx etc.
still if i would be installing to my sd card shouldn't it show up on my app draws or whatever it's called? on market i don't have "open" option only "uninstall"
Ahh yes i had this problem. Some custom roms need google apps (gapps) installed for your phone to receive stuff from the market.
Do you see the Andriod Market App? Can you sign in?
this is what i was telling you earlier depending on whos Rom you are installing depends what things they've taken out or left in. If it's taken out you have to download some or the apps again to get other things to work.
yup... i redownloaded it from the market, but "open" wouldn't show up, luckily i had the app on my dropbox too and i managed to start the restore apps on it now, im curious what happens when restore will finish
it worked afterall, im happy atm
cool mate you will learn alot by trying different roms but the basic process for flashing is always the same.
Hi guys!
I've been reading your comments on this thread and now i have a lot of questions!:
1) I have installed 4.0.0.9 but according to cooltt it's better CWM 5.x.x, how i can install it now?
2) I thought like jokerman170 to install TheMythICS but now i seeing that he has had problems, how you solved it? Which version you downloaded?
thanks in advanced!!
u can flash it just like the 4, i don't really like this rom, looks like a stupid theme and i got 256 rating on quadrant :| wtf
i downlaoded the TheMyth beta 2 full
icsunday2 here i come
icsunday2 it's difficult to install for a newbie like me and some people have had problems with this rom.
Why TheMyth is bad?
sorry for my english
it wasn't too fast and was kinda buggy and low quality imo, ICSunday is cool, but can't really log onto my wi-fi yet, working on it now
EDIT: worked with second try, really impressed with ICS2 atm
Okay mate
Ok guys thing is installing icsunday is not tough but u didn't understand what to do.mmmmm use cwm 5 for icsunday and icsunday2 is best rom ever.
sent from my phone
plzzzz hit thanks if I helped you in any means .......
i did use the 5, cause the Myth rom upgrades it for you
Btw could you check out my other thread that i just started.... im kind of a retard...

Need urgent help regarding clockwork recovery mood

hello gentlemen
i bought my viewpad 7 last week. after digging this forum i tried to root my tablet with super one click but i was unable coz it stuck in screen and happen nothing somehow i tried gingerbreak and it worked. as i am totally newbie in android os and i have no idea on programming. but the most important thing is clockwork recovery i saw couple of youtube videos and tried working but ended up with error . i dont know how to setup adb on my pc so i tried terminal emulator but no keyboard.. tried qtadb but show me '' permission denied'' now i am pulling my hair off. i have got rom manager installed on my tablet but whenever i ty to install update.zip it say signature error or somthing (i have got custom rom in my sd and renamed to update zip also i have clockwork recovery img and flash recovery) the only thing i need is a working terminal emulator as i have no idea on comand from pc.
so is there anybody who can give me a easy tutorial or make a video to demonstrate how can i get clockwork recovery installed also custom rom i would be really really greatful
hope someone saves me...
Hello & welcome, there's no need to panic but definitely - very important to be patient, set aside at least half a day or more, and, read - read - read. Take notes as you go along & do NOT rush.
If you have not gone thru this sticky, please do so - http://forum.xda-developers.com/showthread.php?t=1236990
Sticky #1 is mandatory reading to take full advantage of the Vpad7 so that you can understand the basics, describe your Vpad's hardware & build information, etc. and how to press various buttons, go back, reset & get into Recovery and Bootloader. Without knowing it, you are prone to run into problems.
First, you need to check & make sure that your CWM (which verison) is properly installed & working (and, if so) - check under the Advanced submenu to verify "Signature Verification" status.
Do you have an "older" non-ITE or "newer" ITE multi-touch screen device, which determine which custom ROM can be used? Be specific, please ...
Generally speaking, there is no need to rename a downloaded ROM's zip file to update.zip for flashing ... so I suggest that you do more reading first.
Do you have USB debugging turned on? Applications - unkown sources turned ON to allow installation of non-Market apps? A working knowledge is essential to avoid (soft) bricking your device by being able to understand the process for Flashing - start here http://forum.xda-developers.com/wiki/Flashing_Guide_-_Android
There's nothing simple & easy about all these, sorry - time & patience is a requirement to get everything working together. Look under the "Development" section for how to install ROM & the issues involved - there are just a handful of ROMs and you don't need to spend a hundred hours going thru all of them, a few hours of reading will do - a 10 minute Youtube video isn't going to do it. The best person to "save" you is you - YMMV. Regards.
thanks a million i finally made it. i used rom manager to install un official clockwork recovery and did install custom rom however i need one more final solution i was trying to get app2sd but my rom maker said it is built in inside the rom just need to creat ext3 but i guess i cant do that without comand so again is there any manual method to do that i saw an option on rom manager but it offers only 512mb partition but i want more may be 8 gb or 4gb i have 16gb sd card.. so can u help me pls...
and i yes i had usb debug on. unknown source on
big_b0sss said:
... i used rom manager to install un official clockwork recovery ... custom rom however ... app2sd ... is built in inside the rom just need to creat ext3 but ... without comand ... rom manager ... offers only 512mb partition ... may be 8 gb or 4gb i have 16gb sd card..
Click to expand...
Click to collapse
1. Rom manager - I do not use them on my Android devices but if you are comfortable with it and help simplify your tasks & learning curve, good for you. Remember to backup, backup & backup your work & save it to more than one location - those "oops" happened to all of us, sometimes (and, at the worst time - Murphy's Law 101)
2. You only need a few files in its own sub directory or folder to properly run adb and busybox, and, to run the (good old DOS) command prompt from your PC - just need to type the commands carefully. Alternatively, Terminal Emulator (with or without the shell or user interface) can be downloaded from Android Market to the Vpad7 to install & run (it's not pre-loaded) with SU enabled ... (more reading for you on how-to's)
3. Not sure if you are referring to App2SD in Market (quite a few out there) or DT's A2SD and A2SDGUI in some of the custom ROM. Vpad7's custom ROM recommend 1 MB SD ext3/partition in general (ext4 is more advanced and challenging) - there is no need, advantage or benefit in a 2GB or 4GB ext3 with a 16GB mSD card (as you are allocating/reserving unused space that you cannot dynamically changed or reassign later on as you begin to run low on "general" storage space on the card - PLUS, you will have to reformat the card & wipe/lose everything on it, until it's restored from saved backup)
FYI - I keep the last 3 to 5 CWM Backup images/files on the mSD card and it's close to 3GB in size already, not counting pix, mp3's and saved videos.
4. Older version of CWM Recovery worked best for me in repeated ROM flashing & setup to partition/format the mSD, verison 5.0.2.6 can work but the newest one posted 5.0.2.7 did NOT work for me - YMMV, of course. Refer to the one in Cleanviewpad7 V1.0 and its instructions or EU Vapd 7 V1.7b - as I'm guessing from your description that your device is a newer ITE multi-screen hardware build. KWBR V3.2 ROM works with ITE and has the newer kernel and A2SD is easy to use per installation guide - it's lean & stripped of non-essential apps.
Have patience, backup & have run !
thanx again for ur reply but i dont know why i do not get keyboard on my terminal emulator. i tried to put comand through terminal emulator but due to keyboard issue i cant i also tried dos but i have no knowledge on that. can u make a video for me or a tutorial how can i get a2sd work on my vpad 7
thanks again
big_b0sss said:
... dont know why i do not get keyboard on my terminal emulator. i tried to put comand through terminal emulator but due to keyboard issue i cant i also tried dos but i have no knowledge on that.
Click to expand...
Click to collapse
First, as I asked before, we do NOT know which ROM you are trying to use?
But, I'm going to guess - since I've flashed all of the working ITE ones here, and you are using KWBR v3.x - and, if so, please confirm or verify, yes or no.
If so, I had issues with its keyboard not showing up in terminal emulator, and there are different reasons for it - namely, including the OP developer's choice of installed KB. However, as a workaround - by running adB/busybox from Windows Vista's command prompt, I can execute instructions to re/mount, reboot, etc.
By installing a different KB & switching to it, it worked under terminal and I can run command prompts directly. There is a learning curve involved here - not something to rush, rather steps by steps - there are "stickies" in the threads and I do not want to further clutter up excellent guides already written up, 6 to 9 months plus ago - which I took time to read, follow & work with. I encourge you to do so as well.
My advice, the easiest to do, is to install & start with a different ROM - Cleanviewpad ROM is basic, simple & easy to install, virtually "bug" free and I suggest that you start with that. KB worked directly as a toggle, popping up from terminal emulator, and you can run commands from it.
Once you are comfortable & has everything working, you can optimize your A2SD and move apps from internal storage to mSD card, etc. and progress to the next level - EU Vpad 7 V1.7b ITE ROM is nice but from experience and reading the thread's posts, some "beginners" lacking knowledge & skills have trouble with it. By running a # of patches, I get it updated to the latest and it's running optimized to my personal liking - it's not entirely difficult to learn but not for someone completely new to Android OS.
Here's a link that you could've google right here in XDA - guide to ADB - bookmarked the link for you, please search for other guides, thanks
http://forum.xda-developers.com/showthread.php?t=879701
hi there thank you so much for helping me again and yes i am using kwbr rom because i have tried cleanviewpad 7 but stuck at welcome screen doesnt work anything then tried lakehouse froyo enhanced but link disabled so stuck with this rom.. i really wish i cloud post on dev section coz im kinda stuck with this post..
but hey if u dont mind and if u have froyo enhanced rom can u upload that for me or give me a working link...
sorry for bothering u but would appreciate
Still waiting for a ROM for Viewpad 7e. Anyone know of one in development? Even the stock ROM bundled with CWM would be good so that we would have the ability to do a Nandroid backup.
Sent from my SPH D700 using XDA App
Cyanogen Mod 9.4, Shadow kernel, EI22. I like my Ice Cream Sandwich!
big_b0sss said:
... using kwbr rom because i have tried cleanviewpad 7 but stuck at welcome screen doesnt work anything then tried lakehouse froyo enhanced but link disabled ... and if u have froyo enhanced rom can u upload that for me or give me a working link...
Click to expand...
Click to collapse
Are you making good progress after rooting with custom ROM, learning a bit more about using adB and terminal emulator? I searched my storage bins for what I've kept for the Vpad7 - and I have NO luck yet finding the Froyo enhanced ROM. I did uploaded the EU V1.7b ITE custom ROM to Dropbox, along with the a2sd*.zip file (just in case, you are comfortable & ready to try - after backing things up) The A2SDGUI app is available in Market, just search & download & install up once the EU V1.7 ITE ROM is up.
A2SD does NOT need to be working for the ROM to do its basic functions, just that it will soon run low on internal storage/memory and that's where A2SD come in. If you find it useful, do a CWM backup first , then use the earlier version of CWM to reformat the mSD card again (thus, wiping it clean) and setup a 1MB ext3 partition per detailed instructions. Reboot & reconnect USB, and move/restored all of your saved files/folders/settings, etc. back to the mSD drive.
Next, flash the A2SD program by DT again just to be sure from Recovery - and then Restart into Recovery. Wipe cache & dalvik and boot up again - cross your fingers and A2SD should be up & running - check it with A2SDGUI and/or Titanium Backup will display various memory/partition/storage space & usage (used/free & total)
http://dl.dropbox.com/u/64025118/EUViewpad7v1.7b-ITE.zip
http://dl.dropbox.com/u/64025118/apps2sd-2.7.5.3-dt.beta04-signed.zip
Again, I am and will be be responsible for anything if something goes wrong by using & flashing these zip files, they are unchanged or unaltered as I originally downloaded them. I'm simply posting them with the mess created by the multi-upload servers being offline, etc. as many folks are completely at a loss for what to do next. Full credits go to the OP/xda-developers for creating their masterpieces. If you are not comfortable or unsure, please do not proceed or assume the risk - the stock ROM, especially unrooted, isn't bloated by any means at all. There is NO over-clocking at this point for any ITE kernel for the Vpad7, period - none that I know of. Folks, do NOT confuse or try this with Vpad7e (which is a different device, sorry - cannot help at all)
Regards & do post with your results and share, and, if I can help further with the specifics, will be glad to do so.
about the euvpad rom
hi there i am glad that u sugested me that rom but before i try to do anything i just want to ask that which rom is better, im asking u coz u might know as u have tried diffrent rom. i am currently having no issue with kwbr rom however somtimes lag and slowness i know its bocoz vpad has only 600mgh processor so does euvpad rom faster or is there any good thing just wondering...
if euvpad rom is better i will go ahead and intall it.. so kind of waiting on ur reply
big_b0sss said:
hi there i am glad that u sugested me that rom but before i try to do anything i just want to ask that which rom is better, im asking u coz u might know as u have tried diffrent rom. i am currently having no issue with kwbr rom however somtimes lag and slowness i know its bocoz vpad has only 600mgh processor so does euvpad rom faster or is there any good thing just wondering...
if euvpad rom is better i will go ahead and intall it.. so kind of waiting on ur reply
Click to expand...
Click to collapse
Personally, I prefer and continue to use EU V1.7b for ITE, it has support for European languages as well as Asian languages. KWBR only support Euro language and the ROM is more "stripped" down with fewer apps, but it does work nicely "out of the box" with A2SD - downside being that internal memory/storage still seem to run low (once I re-install 50+ apps on my device)
For EU V1.7 - it's using an older version of Android Market, but can be easily updated if one wanted to, and, has a few more "basic" apps pre-installed including Documents To Go - and, by adding "Car Home" - I have a working 7" GPS device in the car when needed (sound volume is low, however due to those tiny stereo speakers) - I have been running it for 5+ months now, very smooth & few, if any, FC or freezes, and, Angry Birds running nicely on it, same with YouTube videos over WiFi connection (my 3G is on Edge network, so speed is SLOW and thus very choppy due to broadband speed, not CPU-related)
If you are running KWBR nicely now, do a Backup from CWM first, wipe cache/dalvik & system next - then flash the EU Rom and setup - to see whether you like it. And, if you do - follow the post's steps that I wrote up a while back and get A2SD running with the earlier verison of CWM for ext3 partition, restore/copy back all the files to the mSD card - and reboot/check for A2SD functionality, hopefully - it works without further tweaks - and I think you will like it.
If not, it's easy enough to get back into Recovery, wipe clean it first (very important to clear all traces) and RESTORE the KWBR image from the mSD, and reboot - and you can continue using it. Set aside 2 or 3 hours to do this slowly & right, and you will find the process educational & informative - and, as I always remind newbies - the rules are simple - Backup, Backup and Backup !!
Cheers & go have fun !

[Q] What are the main differences between the three rom types?

For starters. I am a Nook noob and I am not affraid to admit it.
I have read, read, read, and then read some more about rooting, roms, CWM, CM, and so on and I did puzzle most of the pieces together, but not all.
If I got it right there basically are 3 different roms one can choose for the NT:
Stock rom (the original state)
Stock rom Rooted
Alternate roms: CM (7,8,9), MIUI or any other variation of Android firmware distribution
The usage distribution of the roms can be found in a poll here.
Stock (original) limits you in using full potential of the NT, which typically means that you can not use Google Drive, install/use any apps other then the ones Nook market provides. You can not put apps on the home screen, use any widgets and you are very limited in what you can alterate on the system.
Stock Rooted is the state in which that you are still using the original firmware, however you now have root acces. This means that you have acces to Google Drive and are able to install/use most of the apps on Google Drive on your NT. You can use various launchers to access these apps and can set a launcher as default instead of the original launcher.
The easiest way to get here is by rooting your NT through an SD card. You only need the SD card for the rooting process. The (rooted) firmware remains on the internal memory of the NT.
In this, you:
Still have acces to all the original Nook apps and features (you are still using the original Nook system)
You have the possibility to UNroot the device and turn it fully back to it's original state
What I am not sure about is:
Can you use / place apps on the home screen?
Can you use / place widgets on the home screen?
Are there any other important differences between Stock (original) and Stock Rooted?
When going for an alternate rom, you have a diversity of choices, but all are fully seperate roms, that either replaces the original firmware or complements it (dual boot). What you get in return is a fully functional, tweakable Android system, on which the version depends on the rom that you choose. You can access Google Drive, install/use most apps, place widgets, use different launchers, etc.
The easiest way to get here is by using a SD card. I can not find the specific topic that explains the procedure though. It seems that you can choose to maintain the original firmware and place the rom on the (external) SD, which leaves you with a dual boot system, or you can replace the stock rom with the custom rom.
In this, you:
Loose usage of all of the NT's orininal apps and features (when using the custom rom)
What I am not sure about is:
Where in the process you can choose to either place the custom rom on the (external) SD or install in the internal memory.
Are there any other important differences between Stock Rooted and custom rom?
My main question is: Can you confirm my findings and help me answer the questions/uncertainties?
I can imagine this thread would be of help to others who spent a lot of time reading, but are left with some basic questions. That is why I took my time writing it.
When you use the sd card method, I use a cm7 card when I boot the tablet with the card it boots up as a regular android tablet. It's does not install anything permanently to the tablet. I get full google play. Like I said no nook software at all just android tablet. I use the nook app if I want to read. It has the cool page turn animation the nook software does not go figure. Take out root sd card turn off and turn it back on with no sd card or an unpacked sd card, it boots up just like it came out of the box. All app installs music anything put on the nook with the hacked card in it goes on the card. You have no access to the nooks memory except ram which gets cleared as soon as u restart it. As long as the hacked sd card is not in it there's no way for anyone to tell you've done anything to it, cuz u haven't it all stays on the sd card. Performance is great I play 3D games like mad trigger with no lag, it's the best of both worlds & only way to go if u ask me. I don't know why anyone would do anything els. It's just to easy. Hope that helped.
Sent from my HTC Amaze 4g
Thread moved. While I appreciate the effort you've put into this post by reading up and finding out about all the different ROM's, you need to also look to make sure you post in the correct sections of the forum and this is also stated in the sticky in the General section, not to post questions in General. If your thread is a question/multiple questions and you even tick the "Is this a question box" when creating the thread then you must post it in the relevant Q&A section.
Thanks
AvRS
hd2joel said:
When you use the sd card method, I use a cm7 card when I boot the tablet with the card it boots up as a regular android tablet. It's does not install anything permanently to the tablet. I get full google play. Like I said no nook software at all just android tablet. I use the nook app if I want to read. It has the cool page turn animation the nook software does not go figure. Take out root sd card turn off and turn it back on with no sd card or an unpacked sd card, it boots up just like it came out of the box. All app installs music anything put on the nook with the hacked card in it goes on the card. You have no access to the nooks memory except ram which gets cleared as soon as u restart it. As long as the hacked sd card is not in it there's no way for anyone to tell you've done anything to it, cuz u haven't it all stays on the sd card. Performance is great I play 3D games like mad trigger with no lag, it's the best of both worlds & only way to go if u ask me. I don't know why anyone would do anything els. It's just to easy. Hope that helped.
Sent from my HTC Amaze 4g
Click to expand...
Click to collapse
Thanks, that helps indeed. So basically you only use the CM7 rom, and neglect the stocked software. Sounds like an attractive approach. Thouh it is a bit of a shame that the 8 or 16 GB of internal storage are not usable then.
@AvRS: I did read the section about no questions in the General Forum's policy. I actually thought I posted in the Q&A but appearantly I didn't. I probably started the thread just before I read that part. Thanks for moving it to the proper section.
chris996 said:
What I am not sure about is:
Can you use / place apps on the home screen?
Can you use / place widgets on the home screen?
Are there any other important differences between Stock (original) and Stock Rooted?
Click to expand...
Click to collapse
For the first point: Not on firmware 1.4.3, but on lower firmwares you can download an app called Nook Color App Manager (you have to side-load it as it is not in the Play store) that will allow you to do just that.
For the second point: You cannot place widgets on the Stock launcher. You have to install an alternate launcher for widgets.
Also, I think you mean Google Play, not Google Drive.
chris996 said:
Thanks, that helps indeed. So basically you only use the CM7 rom, and neglect the stocked software. Sounds like an attractive approach. Thouh it is a bit of a shame that the 8 or 16 GB of internal storage are not usable then.
Click to expand...
Click to collapse
Unless you re-partition your Nook, you never have access to the full 8/16GB. You only have access to the 1GB MyNook partition. You have to re-partition (or have a B&N store do it for you) to get more space for user apps.
Ok guys, thanks for all the answers. A lot more is clear now, but definately not all. Also, yes I mean Google Play / Not Drive (doh, my bad)
As I read more and more, it becomes clear to me that all the information about rooting the Nook is soooooo spread and unorganised. It is nearly impossible to make an informed choice without having to spent hours and hours of reading the forums.
Just now for example, after a total of 2-3 hours reading the forums, it came to my attention that there is a big difference between the 8GB and 16 GB NT and that some rooting procedures can brick the NT8.
Anyway, on with the questions:
It seems that the latest version CM10, is the one that currently has most of the attention and most of the development resources go to this. Is this version now steady? Also for N8GB? Are there still big issues, like: no microphone working, sudded reboots, crashes, etc?
I read that CM9 is no longer being develloped. Is this version steady now? Also for NT 8GB? With a working microphone, no sudden crashes, reboots, etc.? Or was it abandoned while unfinished?
How about CM7? Same questions as the above.
So basically, even afters hours of reading, I still have not figured out which version would be best to use for my 8GB NT, if I want full Android functionality, but with everything working steady (also microphone) and avoid any big issues.
Hope you guys can shine some (more) light on this.
chris996 said:
Ok guys, thanks for all the answers. A lot more is clear now, but definately not all. Also, yes I mean Google Play / Not Drive (doh, my bad)
As I read more and more, it becomes clear to me that all the information about rooting the Nook is soooooo spread and unorganised. It is nearly impossible to make an informed choice without having to spent hours and hours of reading the forums.
Just now for example, after a total of 2-3 hours reading the forums, it came to my attention that there is a big difference between the 8GB and 16 GB NT and that some rooting procedures can brick the NT8.
Anyway, on with the questions:
It seems that the latest version CM10, is the one that currently has most of the attention and most of the development resources go to this. Is this version now steady? Also for N8GB? Are there still big issues, like: no microphone working, sudded reboots, crashes, etc?
I read that CM9 is no longer being develloped. Is this version steady now? Also for NT 8GB? With a working microphone, no sudden crashes, reboots, etc.? Or was it abandoned while unfinished?
How about CM7? Same questions as the above.
So basically, even afters hours of reading, I still have not figured out which version would be best to use for my 8GB NT, if I want full Android functionality, but with everything working steady (also microphone) and avoid any big issues.
Hope you guys can shine some (more) light on this.
Click to expand...
Click to collapse
Answers:
1) Most of the dev's I believe use NT 16 GB so NT 8GB is a bit of a risk.
2) True, CM9 is no longer being focused on, Jellybean is the center of attention. No it is not considered steady/daily driver material. You might as well flash a jelly bean rom if you are going to flash a newer rom on ur NT.
3) If you want a guarantee that a ROM will run on the NT 8GB, the CM7 ROM by celticwebsolutions internal version is your best bet. It should be guaranteed to work. All those features you mentioned should be working. VOIP does not work on any of the ROM's currently
Number 3 update
Just one update on part of the question, answer to 3); Magicjack app works on it.
ShinnAsuka said:
Answers:
1) Most of the dev's I believe use NT 16 GB so NT 8GB is a bit of a risk.
2) True, CM9 is no longer being focused on, Jellybean is the center of attention. No it is not considered steady/daily driver material. You might as well flash a jelly bean rom if you are going to flash a newer rom on ur NT.
3) If you want a guarantee that a ROM will run on the NT 8GB, the CM7 ROM by celticwebsolutions internal version is your best bet. It should be guaranteed to work. All those features you mentioned should be working. VOIP does not work on any of the ROM's currently
Click to expand...
Click to collapse
ShinnAsuka said:
Answers:
1) Most of the dev's I believe use NT 16 GB so NT 8GB is a bit of a risk.
2) True, CM9 is no longer being focused on, Jellybean is the center of attention. No it is not considered steady/daily driver material. You might as well flash a jelly bean rom if you are going to flash a newer rom on ur NT.
3) If you want a guarantee that a ROM will run on the NT 8GB, the CM7 ROM by celticwebsolutions internal version is your best bet. It should be guaranteed to work. All those features you mentioned should be working. VOIP does not work on any of the ROM's currently
Click to expand...
Click to collapse
Thanks a lot, that really answers most of my questions. To keep you guys on edge, just two more :
With the CM7 'celticwebsolutions rom' you mention 'internal'. I assume that you mean that this rom overwrites the stock rom. Is there an alternative 100% steady CM7 rom that can be loaded aside the stock rom (on external SD)?
Does the rooted version of the stock rom support VOIP, such as skype?
"Does the rooted version of the stock rom support VOIP, such as skype?" Nope, rooted not rooted on any version will not support direct Skype or Video conferencing app that I know of on NT. This may change once OTG is implemented in future development.
chris996 said:
Thanks a lot, that really answers most of my questions. To keep you guys on edge, just two more :
With the CM7 'celticwebsolutions rom' you mention 'internal'. I assume that you mean that this rom overwrites the stock rom. Is there an alternative 100% steady CM7 rom that can be loaded aside the stock rom (on external SD)?
Does the rooted version of the stock rom support VOIP, such as skype?
Click to expand...
Click to collapse
chris996 said:
Thanks a lot, that really answers most of my questions. To keep you guys on edge, just two more :
With the CM7 'celticwebsolutions rom' you mention 'internal'. I assume that you mean that this rom overwrites the stock rom. Is there an alternative 100% steady CM7 rom that can be loaded aside the stock rom (on external SD)?
Does the rooted version of the stock rom support VOIP, such as skype?
Click to expand...
Click to collapse
for your first question, there is an SD version but it has not been confirmed to work with NT 8GB
You can however make your own internal sd card version using the internal version provided here and instructions that are listed over a succulent's blog: www.iamafanof.wordpress.com
if you aren't all too tech savvy, I would advise against making your own bootable SD, but if want to experiment and learn a thing or two, go for it!
chris996 said:
Thanks a lot, that really answers most of my questions. To keep you guys on edge, just two more :
With the CM7 'celticwebsolutions rom' you mention 'internal'. I assume that you mean that this rom overwrites the stock rom. Is there an alternative 100% steady CM7 rom that can be loaded aside the stock rom (on external SD)?
Does the rooted version of the stock rom support VOIP, such as skype?
Click to expand...
Click to collapse
There are instructions on how to install/create your own SD Card version of any ROM, you just have to try it out.
Skype isn't supported at all. It will install (according to the Play Store online) on my JB (AOKP) NT16, but I don't think it will run. For one thing, there's no camera or camera support.
Which rom can i call with viber or skype??? I used viber on Cm7 but i just can send text message,and when i call i cant hear or talk with anyone:what::what::what:
Cant anybody help me???
Sent from my Nook Tablet using xda premium
BadKid3011 said:
Which rom can i call with viber or skype??? I used viber on Cm7 but i just can send text message,and when i call i cant hear or talk with anyone:what::what::what:
Cant anybody help me???
Sent from my Nook Tablet using xda premium
Click to expand...
Click to collapse
Why not use Magicjack for voip, it free unless you want to get the dongle for less than $30. With video conferencing app like skype, you can only text but what the point of that.

[Q] i777 working bare bones after memory overflow + reboot

Hello guys..
I am an ATnT Samsung galaxy S2 i777 user. Some may be aware that the logcat files generated by Samsung at times causes issues by exhausting the memory reserved for the apps. My phone was plagued by the issue and i wasnt aware of the exact problem.
As a result, i kept moving apps/data to the external mem card as much as possible to keep the phone cured of the 'device memory low' warning sign. I was away from the scene due to hectic schedule and as there wasnt any big need to install new apps/features either, i wasnt bothered too much.
Finally one day the phone rebooted while i was asleep, and i woke up to find that much of the customization was gone. No Gapps, No Apex launcher, No Amazon app store, many apps (incl Titanium backup) missing.
Forced to google, found out the *#9900# trick and wiped off the excess logcat files. The memory status got straightened out, but the phone wont restore to the earlier state even after reboots.
I was running Shostock ROM, and it was about time i moved to either Kitkat or even Lollipop based ROMS. And this is what i plan to do now that i have the perfect excuse. Before i pulled the trigger, i wanted to clarify some points out so pls do lend me a helping hand here.
Have chosen Carbon ROM as my next. (Geekynimrod and rogsersb11 been superb with the work)
1) I have moved a lot of apps/data to the mem card. Once i have flashed the new ROM, will this data interfere with the new setup?
2) I would ofc need to empty the mem card of the data which i dont require. How to clean up the moved app/data if they are of no use?
spacescreamer said:
Hello guys..
I am an ATnT Samsung galaxy S2 i777 user. Some may be aware that the logcat files generated by Samsung at times causes issues by exhausting the memory reserved for the apps. My phone was plagued by the issue and i wasnt aware of the exact problem.
As a result, i kept moving apps/data to the external mem card as much as possible to keep the phone cured of the 'device memory low' warning sign. I was away from the scene due to hectic schedule and as there wasnt any big need to install new apps/features either, i wasnt bothered too much.
Finally one day the phone rebooted while i was asleep, and i woke up to find that much of the customization was gone. No Gapps, No Apex launcher, No Amazon app store, many apps (incl Titanium backup) missing.
Forced to google, found out the *#9900# trick and wiped off the excess logcat files. The memory status got straightened out, but the phone wont restore to the earlier state even after reboots.
I was running Shostock ROM, and it was about time i moved to either Kitkat or even Lollipop based ROMS. And this is what i plan to do now that i have the perfect excuse. Before i pulled the trigger, i wanted to clarify some points out so pls do lend me a helping hand here.
Have chosen Carbon ROM as my next. (Geekynimrod and rogsersb11 been superb with the work)
1) I have moved a lot of apps/data to the mem card. Once i have flashed the new ROM, will this data interfere with the new setup?
2) I would ofc need to empty the mem card of the data which i dont require. How to clean up the moved app/data if they are of no use?
Click to expand...
Click to collapse
I would recommend checking this thread out:
http://forum.xda-developers.com/gal...de-partition-i777-phone-data-storage-t2839161
This procedure made all the difference for me.
I would also recommend choosing the 4.4.4 OmniRom. Normally I don't favor any Rom over the others in comments out of respect however, OmniRom is still being updated almost daily. It's the only 4.4.4 still in active development. I've tried many of the others and have settled on OmniRom for the past couple of weeks:
http://forum.xda-developers.com/showthread.php?t=2544790
There is a lot of quality work still available here. It's been a lot of fun reading these threads.
Madcat8686 said:
I would recommend checking this thread out:
http://forum.xda-developers.com/gal...de-partition-i777-phone-data-storage-t2839161
OmniRom is still being updated almost daily. It's the only 4.4.4 still in active development.
http://forum.xda-developers.com/showthread.php?t=2544790
Click to expand...
Click to collapse
Thanks a lot for the tip mate. I will def check the thread out.
Carbon ROM has been very impressive, and i wanted to try that out .. hence the inclination. But i guess i can always try both
Once i brush the basics off again, i ll be more comfortable getting the flashing done without too much apprehension. Thanks again. :good:

Categories

Resources