So, I have read through every thread I can find at least 3 times each trying to figure out how to unlock the bootloader on my AT&T US Atrix 4G with Android version 2.3.4 Build number 4.5.91 and getting VERY frustrated.
I have successfully rooted it with SuperUser and have ROM Manager installed to try and get Clockwork installed but when I try to unlock, I keep getting the error "oem unlock is not implemented."
I have tried just about every method that has been posted and fairly technically savvy and for the life of me cannot get this to work. Can someone please tell me what I need to do so I can flash some ROM's on this awesome phone? Thank you in advance for any assistance.
Have you followed the pudding thread?
http://forum.xda-developers.com/showthread.php?t=1136261
"Works/Does not work list
ATT version 1.8.3 or later: Works"
What process are you following? Please describe exactly what you are doing to try and unlock.
Yes, I followed that post but can't get RSDlite to see my phone. I load up the .sbf file into RSDlite plug in my phone and nothing happens. I click on Show Phone and nothing happens. I clicked on the Guide for beginners provided by: http://goo.gl/vfUXc but when I type in "fastboot oem unlock" I get the error "oem unlock is not implemented.
I think I have now officially bricked my phone. I tried using Tenfar's CWM Recovery and was actually able to get into Clockwork. I tried flashing an unlocked kernel. I rebooted and now all I get is "Failed to boot 2." If I hold the volume down and power on, i get a flash of text but it goes away before i can read it and then just a black screen. If I hold the volume up and power on, I get "Failed to boot 2 Starting Fastboot protocol support."
Is there ANY way to fix this? Thank you again for any assistance!
Follow pudding using a different computer. Some computers, especially those with Windows 7 x64 OS can have issues. Try a XP computer if you can.
Also, if you are seeing fastboot protocol support you can use fastboot.
<edit> Why are you blindly flashing crap and getting yourself in deeper???
Because I thought I knew what I was doing. I've flashed plenty of ROM's on my previous phone, HTC Aria, with zero issues. I certainly didn't think it was going to be this tough and frustrating on my new phone. I will try the process again from a XP machine and let you know. Thank you for being patient with me. Keep your fingers crossed!
BTW, exactly which SBF should I use? The link is dead for RSDlite 5.5, is 5.3.1 ok?
blumenthala said:
Because I thought I knew what I was doing. I've flashed plenty of ROM's on my previous phone, HTC Aria, with zero issues. I certainly didn't think it was going to be this tough and frustrating on my new phone. I will try the process again from a XP machine and let you know. Thank you for being patient with me. Keep your fingers crossed!
BTW, exactly which SBF should I use? The link is dead for RSDlite 5.5, is 5.3.1 ok?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1348587
Unlock:
Unlocker only SBFs - These small 1mb SBF files will get your phone ready to fasboot oem unlock. They are the files most people should use.
ATT ONLY - Unlocker for 1.8.3 and 4.5.91 ATT firmwares
Orange/Bell/Telestra/Latin America/International users ONLY - Download IHOP
Full SBFs with unlocker - I do not recommend flashing full SBFs unless you must. please use the smaller files above. These files are ATT ONLY.
http://www.multiupload.com/C0I82IXH7V - 2.3.4 full sbf with unlocker and /preinstall root
http://www.multiupload.com/FLZR9I9CNX - 1.8.3 full sbf with unlocker (why are you using 1.8.3?)
Big thanks to Ratchet1 for risking his phone to test this, also SamCrip and stevendeb for finding the magic update. All the Bell/Orange users should give them a big thank you! Also eval- for making sure I didn't overwrite your bootloader with a CDROM image
[Solved]
Ok, for anyone who reads this...the trick is to not do this on a x64 system. As soon as I plugged the phone into a machine with XP on it, it worked like a charm. If someone, anyone, had shared this tid-bit of information from the beginning, I could have gotten some sleep last night.
If this helps just one person to not go through the terror I just did, then I can sleep soundly tonight.
Thanks goes out to CaelanT for their help
CaelanT said:
http://forum.xda-developers.com/showthread.php?t=1348587
Unlock:
Unlocker only SBFs - These small 1mb SBF files will get your phone ready to fasboot oem unlock. They are the files most people should use.
ATT ONLY - Unlocker for 1.8.3 and 4.5.91 ATT firmwares
Orange/Bell/Telestra/Latin America/International users ONLY - Download IHOP
Full SBFs with unlocker - I do not recommend flashing full SBFs unless you must. please use the smaller files above. These files are ATT ONLY.
http://www.multiupload.com/C0I82IXH7V - 2.3.4 full sbf with unlocker and /preinstall root
http://www.multiupload.com/FLZR9I9CNX - 1.8.3 full sbf with unlocker (why are you using 1.8.3?)
Big thanks to Ratchet1 for risking his phone to test this, also SamCrip and stevendeb for finding the magic update. All the Bell/Orange users should give them a big thank you! Also eval- for making sure I didn't overwrite your bootloader with a CDROM image
Click to expand...
Click to collapse
I have checked everywhere and all the links are deed. i need the 2.3.4 full sbf!!
Yeh I tryed 3 hours to get failed to boot 2 off the phone my friend gave me and no luck, until I noticed that windows 7 x64 didn't even read atrix4g to RSD lite -_- and I also need 2.3.4 sbf please
Sent from my HTC Glacier using xda premium
blumenthala said:
Ok, for anyone who reads this...the trick is to not do this on a x64 system. As soon as I plugged the phone into a machine with XP on it, it worked like a charm. If someone, anyone, had shared this tid-bit of information from the beginning, I could have gotten some sleep last night.
If this helps just one person to not go through the terror I just did, then I can sleep soundly tonight.
Thanks goes out to CaelanT for their help
Click to expand...
Click to collapse
You can do this just fine on a x64 machine. I was able to unlock my handset on Windows 7 x64 without any problems. You just need to make sure you have all the drivers loaded.
Related
Okay guys, i flashed the 2.3.4 ota as soon as it came out (before all this trouble with it of course) and now i am stuck because i was under the impression that the new bootloader would be unlocked so i had never even though about eating any pudding before the fact. Now i come to my trouble, im running a totally stock 2.3.4 att and i cant seem to find a way out.
Question #1- If i have a locked bootloader can i fruitcake back?
Question #2- Is there a possible way to unlock the new bootloader?
Question #3- How in heck do i get root, im on windows 7 and i recently tried the two bat files that one of the devs released and they were a no go, it didnt seem to flash the preinstall when i tried to look for it, it wasnt there. I have been quietly trying to fix this on my own for days now i am asking for a little help. Im stumped.
I got root using the /preinstall method with those 2 .bat files posted yesterday.
From page 30-35 is the guidance I followed from mramirezusa.
Other than that we are in the same boat.. I read puddings will flash relatively safely.http://forum.xda-developers.com/showthread.php?t=1159950&page=30
cthomas5714 said:
Okay guys, i flashed the 2.3.4 ota as soon as it came out (before all this trouble with it of course) and now i am stuck because i was under the impression that the new bootloader would be unlocked so i had never even though about eating any pudding before the fact. Now i come to my trouble, im running a totally stock 2.3.4 att and i cant seem to find a way out.
Question #1- If i have a locked bootloader can i fruitcake back?
Question #2- Is there a possible way to unlock the new bootloader?
Question #3- How in heck do i get root, im on windows 7 and i recently tried the two bat files that one of the devs released and they were a no go, it didnt seem to flash the preinstall when i tried to look for it, it wasnt there. I have been quietly trying to fix this on my own for days now i am asking for a little help. Im stumped.
Click to expand...
Click to collapse
Question #2- Is there a possible way to unlock the new bootloader? yes use pudding
cthomas5714 said:
Okay guys, i flashed the 2.3.4 ota as soon as it came out (before all this trouble with it of course) and now i am stuck because i was under the impression that the new bootloader would be unlocked so i had never even though about eating any pudding before the fact. Now i come to my trouble, im running a totally stock 2.3.4 att and i cant seem to find a way out.
Question #1- If i have a locked bootloader can i fruitcake back?
Question #2- Is there a possible way to unlock the new bootloader?
Question #3- How in heck do i get root, im on windows 7 and i recently tried the two bat files that one of the devs released and they were a no go, it didnt seem to flash the preinstall when i tried to look for it, it wasnt there. I have been quietly trying to fix this on my own for days now i am asking for a little help. Im stumped.
Click to expand...
Click to collapse
hey man first things first. dont panic, you are not stuck. this is temporary at best, in the mean while theres plenty of stuff you can do, sbf is not safe to begin with. so actually be gladd you only got to use RSD one time
first things first, get yourselfed unlocked, pudding will do the trick. once after pudding, you never have to touch RSD
Once you are done with pudding go ahead and get tenfars unlocked cwm
once you are done with that you are free to flash pretty much all the roms, as usually custom roms, or fruit cakes dont have bl, only the rest
enjoy
Okay guys, thanks for your help. but let me get this clear, i do not have a unlocked bootloader, im a pudding virgin. I can simply rsd the 1.83 with pudding and thats it? No worries no nothing?
cthomas5714 said:
Okay guys, thanks for your help. but let me get this clear, i do not have a unlocked bootloader, im a pudding virgin. I can simply rsd the 1.83 with pudding and thats it? No worries no nothing?
Click to expand...
Click to collapse
Yes but you still can't use any other sbf. I'd use the raw pudding sbf, unlock, then use CWM from here on out. No more rsd
Sorry about that. There is just the unlock and then the unlock packaged with 1.8.3. The one that has has been causing bricks from my understanding is the packaged one. Be sure you flash just the unlock.
Anyone know what exactly will be erased from /data after flashing the unlock? Also I don't want to restore backed up files that will conflict with new ones. Any guidance on this is appreciated.
snudmusk said:
Sorry about that. There is just the unlock and then the unlock packaged with 1.8.3. The one that has has been causing bricks from my understanding is the packaged one. Be sure you flash just the unlock.
Anyone know what exactly will be erased from /data after flashing the unlock? Also I don't want to restore backed up files that will conflict with new ones. Any guidance on this is appreciated.
Click to expand...
Click to collapse
All user data is wiped when unlocking. The 1.8.3 sbf with pudding is safe to flash but i recommend just using pudding and then CWM and ditch rsd.
jruweaver said:
All user data is wiped when unlocking. The 1.8.3 sbf with pudding is safe to flash but i recommend just using pudding and then CWM and ditch rsd.
Click to expand...
Click to collapse
Agree, just use the pudding only sbf. to unlock , then preinstall to get root.
Make sure to have 50 or so battery so you don't run into the trouble I had with battery being to low to fastboot. Also once you flash pudding you wont be able to boot the phone, don't panic just follow steps to fastboot oem unlock and phone will boot fine afterwards.
Sent from my MB860 using Tapatalk
woahh no bad idea, im scared. I did exactly as you all said and it acts like its hard bricked, SVF:105 error but then it says no OS detected and i have 14 options
1RSD
2Fastboot
3Nvflash
4-9BP something
9Android recovery
10Boot android (no bp)
11Device UID
12Console
13early usb enumeration
14BP tools
WHAT DO I DO?
cthomas5714 said:
woahh no bad idea, im scared. I did exactly as you all said and it acts like its hard bricked, SVF:105 error but then it says no OS detected and i have 14 options
1RSD
2Fastboot
3Nvflash
4-9BP something
9Android recovery
10Boot android (no bp)
11Device UID
12Console
13early usb enumeration
14BP tools
WHAT DO I DO?
Click to expand...
Click to collapse
Which did you flash? Pudding or 1.8.3 with pudding?
Try connecting your phone to pc select fastboot and finish the pudding instructions (fastboot oem unlock)
It might boot then.
Sent from my MB860 using XDA Premium App
Here is what I did.
1. If you were to update to the OTA 4.5.91. Or already on the OTA 4.5.91 you can still unlock your bootloader.
2. Flash pudding only SBF so you can unlock the bootloader. http://diamantephoto.com/fastboot.rar direct link. Flash this one.
http://forum.xda-developers.com/show....php?t=1136261 Original Post about pudding.
It will go to a text only 14 option screen and say something like boot failed 0x1000. Don't freak out and tell me you bricked you phone blah blah blah. You still have to unlock the bootloader by choosing fastboot from your phone and connecting it to the computer via usb. Make sure you have ADB with fastboot tools installed on you computer.
Open command prompt from you computer and type fastboot oem unlock. It'll display warning about voiding warranty and a unique device id. Type again fastboot oem unlock ############. The # are the unique device numbers. Don't type # it wont work. The instructions are posted on the pudding thread if you would like to read more about it.
Then type fastboot reboot to reboot. Unlock should be displayed on top left of screen and it'll take 5 long mins to boot up.
3.Then you need to install CWM and root.
You'll find instructions in the developers form. But if your lazy here is the CWM link. http://forum.xda-developers.com/show....php?t=1138541 follow the instructions or every time you reboot you will loose CWM. For root there are two available for gingerbread. http://forum.xda-developers.com/show....php?t=1140110 I used this one and got root.
http://forum.xda-developers.com/show....php?t=1138204 I hear this works too.. Haven't tested read the post if you want to use this method.
As always don't blame me for bricking if you happen to do so. DO IT AT YOUR OWN RISK. these are the steps I took to unlock and everything works great. Absolutely no problems with my phone after wards.
One thing unlocking your bootloader will format/erase data. Basically a factory data reset so make sure you backup everything with titanium or you favorite app. I would not restore system apps as i've had a few problems with email and motoblur force closes.
Is there a way to root without unlocking the bootloader?
five3zero said:
Is there a way to root without unlocking the bootloader?
Click to expand...
Click to collapse
Yes.
Follow the instructions listed on here:
http://forum.xda-developers.com/showthread.php?p=15023030
The 3rd post has the instructions I followed.
If you have problems be sure to read through the thread as someone else has most likely already had the same issue.
This worked for me.
cthomas5714 said:
woahh no bad idea, im scared. I did exactly as you all said and it acts like its hard bricked, SVF:105 error but then it says no OS detected and i have 14 options
1RSD
2Fastboot
3Nvflash
4-9BP something
9Android recovery
10Boot android (no bp)
11Device UID
12Console
13early usb enumeration
14BP tools
WHAT DO I DO?
Click to expand...
Click to collapse
Just do: fastboot oem unlock (or whatever tthe code is)
Them: fastboot reboot
Sent from my MB860 using XDA App
So Guess who got an Atrix today? me! Guess who also probably bricked their atrix today? me!
So here is what happened:
1: I have an unlocked, rooted Atrix 4G from AT&T running 2.2 1.5.7 I believe.
2: I wanted to flash some roms, so I so I attempted to flash tenfar's CWM, but that didn't work, it said install succeeded but I could not get into CWM ( I tried everything, believe me, I'm no noob)
3: I then attempted to flash CWM from Rom Manager and so I did and I flashed the Atrix version, I then hit boot into recovery from within Rom Manager.
4: What I got next is a screen that says "failed to boot 2, starting RSD mode", now I cannot get passed that screen when it powers up.
5: Worst of all, using MSU (moto sw update), it says device is connected but not what kind, meaning I can't restore it, probably because I had adb mode turned on previosly.
update: after attempting to flash a new SBF, the phone told me it failed because the phone did not re-enumerate. Now I have the same problem, but with a new error message on the boot screen: Battery to low to flash!
I have searched everywhere, now I need to resort to you, xda community, Thanks So Much!!!
If you can get into RSD , check to see if fastboot is an option. If you can get into that I would advise to start over by erasing recovery. Command is fastboot erase recovery, then flash romracers recovery thru fastboot. Once you have recovery reboot into it and flash any ROM like Alien, Aura whatever you like.
Alien Atrix
See the thing is, fastboot is not an option , it immediately goes to RSD mode. I may have found a fix, and I am now flashing a new SFB with rsdlite
That's another option, noticed you were on 1.5.7 so I would advise 1.8.3 fruitcake sbf. Make sure you battery is fully charged, if your battery gives out during sbf flash you will hard brick your phone.
Alien Atrix
while I was flashing the sfb, the device failed to reenumerate and now it gives me a low battery warning, with no way to charge it, regardless, I have a friend who will let me borrow his battery tommorrow then Ill try to flash again, really I should use the 1.8.3? I just tried to flash the 1.2.6, so Your saying its ok to go forward with a SFB flash? I come from a world of Samsung's so these are all new to me besides the time I had a backflip for a week (ugh).
Are you sure your unlocked the bootloader? If you successfully unlocked you would have unlocked on top right corner of boot screen and have fastboot also.
Alien Atrix
I'm not sure if I have there is nothing that says "unlocked" at the top of the screen, and I could previously access the recovery and fastboot before this. I did not get this phone new, it came from the AT&T dev center or something like that. My dad works there.
You need to charge the battery. I stripped an old USB cable down and used the red with the positive side of the battery and black with the negative using tape to hold them in place then inserted the battery in the phone and plugged the USB in the computer. This allowed me to flash a ROM and unlock bootloader. Etc.
Warning this could harm you're phone. If you cross the wrong wires or touch more then just negative or positive areas of the phone and or battery. Although I didn't have any trouble with it you might.
If in doubt do it the right way buy a battery charger for your battery, use someone's battery or phone to charge yours.
Sent from my MB860 using Tapatalk
Ok Im at my computer, If you are unsure of unlocked bootloader I now recommend you RSD either 1.8.3 with unlocker & preinstall or the newest is 2.3.4 with unlocker & preinstall read this thread about 3 times first http://forum.xda-developers.com/showthread.php?t=1136261
Unlock using fastboot, after you get phone to boot for first time, ADB commands for preinstall root, after root use Root Explorer app then delete "install-recovery.sh" @ /system/etc.
Now you are ready to install the newest recovery by Romracer 3.2, Tenfars is outdated and no support from the developer. Read this thread 2 times http://forum.xda-developers.com/showthread.php?t=1204500 I recomend flashing this recovery thru fastboot per Romracer.
Now you are ready to flash your choice of ROM, follow proper procedure to flash new ROMs thru Recovery.
Also check out the unlocked sim codes thread in general, unlock sim.
If I helped click the thanks button
what Im confused on is what exactly i should flash if I am stuck in a kind of RSD mode bootloop/soft brick?
On your first post you said you were on 1.5.7 correct?
Atrix first released with 1.2.6 then updated to 1.5.7 then updated again to 1.8.3
Bootloader was unlocked with the 1.8.3 update
I updated to 1.2.6>1.5.7>1.8.3 then followed this tutorial http://briefmobile.com/how-to-unlock-the-atrix-4g-bootloader[/UR
ok thanks very much! Ill get back to you later once I get a fresh battery.
Ok so I'm about to flash the Pudding .sbf, am I doing this right?
iCracked said:
Ok so I'm about to flash the Pudding .sbf, am I doing this right?
Click to expand...
Click to collapse
yes, that's what you should have done in the first place. you can't do anything with "ROM" in its name without unlocking your bootloader which is why you're in this predicament. unlocked phone (maybe you mean SIM unlocked, free to use on any carrier) is not the same as an unlocked bootloader.
The title of this thread is epic. I lol'd.
Sent from my MB860 using XDA App
defnow said:
The title of this thread is epic. I lol'd.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Definitely laughed myself. I knew it was a 'i bricked my pants'.
I voided my warranty.
pukemon said:
Definitely laughed myself. I knew it was a 'i bricked my pants'.
I voided my warranty.
Click to expand...
Click to collapse
haha thanks guys, yes I am SIM unlocked and everything just said unlocked so maybe I thought the reason they where specific to carrier locking was the radios? haha but I was wrong
I want to thank everyone who has given great information here as my last two phones this place has been invaluable place of information.
I am now trying to be more "carefull" for a mistake I made. I ended up hard bricking a phone with the dreaded Failed to boot 0X1000. I have rooted phones before and understand the process enough to get by.
However I am back at square one I was months ago when I bricked my phone (since have gotten a new atrix), Im ready to try this again. I have done ALOT of reading but to be honest there seems to be do this and do thats than people in the world. I dont want to make the same mistake again.
Trying to find "the way" seems to be at issue. Ive seen everything from avoid RSD to using it to things not addressing as if the brick issue even happened. I feel like theres no path to follow. Im wondering how many others feel this way too who are at the crossroads of doing it.
My phone is rooted, and has Android 2.3.4 and System 4.5.91.MB860.ATT.en.US if that help to point me in the right direction.
Thank you!
You need to go to the IHOP thread, I believe it is stickied, and download only the unlock sbf. You will flash that with RSD and then follow the unlocking directions.. I.e. boot to fastboot, then issue the command "fastboot oem unlock" and follow the instructions on screen. Once done, you will be unlocked. You can then flash recovery via fastboot. You are then free to flash ROMs.
The only reason to ever have to flash an SBF after this is for warranty reasons. However, DO NOT flash a froyo one. Only flash gingerbread based ones or you will hard brick again.
Any questions?
Sent from my MB860 using xda premium
Yes if you follow the instructions in the IHOP thread you shouldn't have a problem:
http://forum.xda-developers.com/showthread.php?t=1136261&highlight=international+house+of+pudding
Here is a useful step-by-step guide to unlocking bootloader:
http://briefmobile.com/how-to-unlock-the-atrix-4g-bootloader
I personally would use the pudding file over the unlock file linked in the Briefmobile walkthrough, i'm sure they are the same but i know for a fact the pudding file works. This at least gives you the step-by-step procedure you are wanting.
Here's a video as well:http://www.youtube.com/watch?v=K4Bf9QIZsRI
I was pretty new to all this when i unlocked my atrix and didn't have any issues, just make sure you follow the instructions properly. Also as d3athsd00r stated try to avoid flashing SBF files via RSD after your bootloader is unlocked, the safest way to flash stuff is via CWM recovery.
Getting the Failed to boot 3 error.
I've been working at this for days now trying to reflash an sbf image to the phone to no avail. Every single time RSDLite (5.6) gives me the error saying it failed to re-enumerate the device no matter which sbf file I use. I am running as admin, and have all the drivers installed. Any help on this would be VERY much appreciated. Any info you need, just ask.
Hows the charge on the battery.
Sent from my MB855 using xda app-developers app
Well, I keep trying to get it to flash so it runs out a lot but I have a battery charger and I periodically charge it for a few hours. There's no way for me to tell how much of a charge it has but I assume it's somewhere around 75%.
"SVF: 108: 1: 2
Failed to boot 3
Starting RSD mode"
is what is says on the phone.
Always gets stuck on "Waiting for re-enumeration" in RSD Lite.
I get this error:
Phone did re-enumerate after RAM downloader was sent. (0x703e). Phone connected.
This is not much info, we need to know, if you were unlocked, locked, what sbf did you flashed last before this, if you flashed some OTA update, or radio, which sbf are you flashing now, if you can boot into fastboot after this error, and anything, that you think might be important to know.
But if you didn't do anything special, first try redownloaing the sbf.
I never successfully unlocked my bootloader, and I think this is where the brick occured so as far as I know it is locked still. I never flashed any sbf prior to this, I was trying to install a different ROM (I don't like blur very much). As far as I know I am able to boot into fastboot (power + volume up button) and it says fastboot on my phone and when it is plugged into my computer RSD lite displays it as fastboot mode but I can't flash anything to it, it'll give me an error in fastboot. When I hold power + volume down, it says something about NVFlash which I believe is an NVidia tool except the phone just shuts off almost immediately after this. The SBF I am flashing is the Sprint 2.3.5 version, and I've tried downloading and redownloading it from about 4 different locations to no avail. I purchased an external battery charger so I can keep trying different things, so the battery is almost always at a 100% charge. As of now I believe the phone to be unrecoverably bricked, and it's pretty sad because I had the photon for all of maybe 10 hours. Safe to say I've learned my lesson about flashing non HTC devices. My EVO 4G was so easy to do, I guess Motorola really doesn't like people messing with their devices.
Edit: If there is anymore information you think would be helpful let me know.
So you can get into rsd lite or not? There is no flashable 2.3.5 sbf, except the electrify one. All these sprint test sbfs, who knows, what it is for, but there is no signature and no full partition smgs. I think it won't even start flashing. Or? If it started to flash in your case, then your phone is bricked. But if you never flashed anything like 2.3.5 ota or 2.3.5 electrify or 2.3.5 pudding, and you can get into rsd lite or fastboot, I don't think it's unrecoverablly bricked.
peetr_ said:
So you can get into rsd lite or not? There is no flashable 2.3.5 sbf, except the electrify one. All these sprint test sbfs, who knows, what it is for, but there is no signature and no full partition smgs. I think it won't even start flashing. Or? If it started to flash in your case, then your phone is bricked. But if you never flashed anything like 2.3.5 ota or 2.3.5 electrify or 2.3.5 pudding, and you can get into rsd lite or fastboot, I don't think it's unrecoverablly bricked.
Click to expand...
Click to collapse
Yes I am able to get into RSD lite, and it recognizes my phone just fine everytime with no trouble. I believe it starts flashing, or it at least creates the image but everytime it gets stuck on "waiting for re-enumeration" and it fails there with an error like "phone did not re-enumerate" or something along those lines. I've tried flashing a 2.3.4 sbf as well but it gives me the same error as if I were to flash one of the 2.3.5 files.
Ok. If it was 2.3.4 - 198_7 or 198_6 sbf and did not even re-enumerated, you need to get unlocked. Try flashing pudding unlock and recovery from fastboot or try flashing this - http://d-h.st/WKD or use this method - http://forum.xda-developers.com/showthread.php?p=25826491
peetr_ said:
Ok. If it was 2.3.4 - 198_7 or 198_6 sbf and did not even re-enumerated, you need to get unlocked. Try flashing pudding unlock and recovery from fastboot or try flashing this - http://d-h.st/WKD or use this method - http://forum.xda-developers.com/showthread.php?p=25826491
Click to expand...
Click to collapse
Pudding unlock in fastboot gives me the error "Failed flashing process. Unable to retrieve interface handle(0x7027) phone connected."
Deblur gives me the same error as before, "failed to re-enumerate".
The link to the third method is really hard for me to understand. I understand the basics in which he speed hacks it, but I don't understand which files I will need to put in and where to get those files and which ones are correct etc.
I've found the directory with all the .smg files that I'm assuming is the image. Which files would I need to speed hack to have a chance at saving this thing?
Also, my phone fails to flash anything. I'm pretty sure it doesn't actually get anything done except to create the image.
In the command line when I type in "moto-fastboot oem unlock" it says INFOOEM unlock not implemented so I take it that means I'm still locked for sure.
When I try to manually write stuff via command line with the command "moto-fastboot flash recovery derpunlock" and any of the .smg files, it sends it fine but it fails on writing it.
bdotr said:
When I try to manually write stuff via command line with the command "moto-fastboot flash recovery derpunlock" and any of the .smg files, it sends it fine but it fails on writing it.
Click to expand...
Click to collapse
thats because deprunlock is a bootloader not a recovery.
step by step what have to done to get this error. sounds like your have a error in recovery.
mof9336 said:
thats because deprunlock is a bootloader not a recovery.
step by step what have to done to get this error. sounds like your have a error in recovery.
Click to expand...
Click to collapse
Well it would never get far enough to let me flash a recovery. I'm not able to flash any .sbf's through RSD lite either. The error it gives me every time is "device failed to re-enumerate".
I'm trying it through the ramloader now. I'm pretty sure I'm stuck on an bum electrify install. When I use the electrify ramloader it reboots to a blank screen with the motorola logo on it and when I try to flash derpunlock over through command line it doesn't say anything past "writing 'boot'".
Pudding must be flashed in rsd lite too.
Fastboot oem unlock is useless right now. You need to get there unlockable bootloader there first.
You need to speedhack CG42 it's bootloader, and it's preventing from re-enumeration, because it is not booting to rsd after re-enumeration. Try that one CG42 from pudding first. You need to split that with moto android depacker. But I have suspicion, that your bootloader or ramdownloader was switched to another signature version.
Last chance, but really the last, is flashing Electrify sbf.
****, now I noticed that, you should never ever flash electrify ramdownloader there. You changed rdl signature version. Now you have only the last chance. Download and flash full electrify sbf. But you will have no 4g, no more ota, and I am not sure if it flashes electrify radio or not, so maybe you will have no service.
If you really want, you can try some combination with creating custom sbf for recovering, but you need to read the whole thread in dev section and get much more familiar with that situation.
peetr_ said:
Pudding must be flashed in rsd lite too.
Fastboot oem unlock is useless right now. You need to get there unlockable bootloader there first.
You need to speedhack CG42 it's bootloader, and it's preventing from re-enumeration, because it is not booting to rsd after re-enumeration. Try that one CG42 from pudding first. You need to split that with moto android depacker. But I have suspicion, that your bootloader or ramdownloader was switched to another signature version.
Last chance, but really the last, is flashing Electrify sbf.
Click to expand...
Click to collapse
It now says fail to boot 2. I'm going to try the speedhack when I get home from work today and I'll let you know how it goes. No 4G I can do without, no ota as well I'm fine with. The radio thing might bug me though. So do I drop pudding's CG42 file into the 2.3.5 image while it's being created? Or do I flash just the CG42?
You cannot get unlocked anymore with cg42 from pudding, even with speed hack. You must read whole how to make custom sbf thread if you want to try custom combinations. If nothing will help, your only solution is flashing Electrify 2.3.5 sbf or wait, if some similar photon sbf comes out (I doubt).
So tired of searching for this file. Everyone keeps saying i need to find 2.3.6 .spf for RSD to unlock bootloader but all th elinks are broken. Can anyone get me a link to the 2.3.6 SPF please?
att atrix 4g 2.3.6
I foud 2.3.4....
http://www.filefactory.com/f/89f588286a560e39/
will this work? top one..or do i need 2.3.6 if im currently 2.3.6?..
edit: well top one isnt right... i dont know wich of these is for ATT US version heh...theres a 2.3.6 but its for Bell ...
Here ya go. das8nt is a big help here on xda and on the atrixforums. http://www.das8nt.com/sbffiles.html Make sure you got the motorola drivers, read the guide a couple times before attempting if you haven't used RSDlite before. Don't downgrade, use the version SBF that your on now currently. Downgrading will result in a hard brick! If you're looking to unlock your bootloader you need the pudding file here Unlocker for 1.8.3 and 4.5.91 ATT firmwares. It worked for me when I unlocked on 2.3.4, should work on 2.3.6.
smenes said:
Here ya go. das8nt is a big help here on xda and on the atrixforums. http://www.das8nt.com/sbffiles.html Make sure you got the motorola drivers, read the guide a couple times before attempting if you haven't used RSDlite before. Don't downgrade, use the version SBF that your on now currently. Downgrading will result in a hard brick! If you're looking to unlock your bootloader you need the pudding file here Unlocker for 1.8.3 and 4.5.91 ATT firmwares. It worked for me when I unlocked on 2.3.4, should work on 2.3.6.
Click to expand...
Click to collapse
Got it! Thanks! Now for some reason adb shell isnt working like it was yesterday. Shrug* sigh ideas?
After you flashed the pudding, did you boot to fastboot and issue the 'fastboot oem unlock' command to unlock the bootloader as described here? Do you have root? what do you get when you type 'adb devices' ? You have usb debugging enabled while booted in android?
smenes said:
After you flashed the pudding, did you boot to fastboot and issue the 'fastboot oem unlock' command to unlock the bootloader as described here? Do you have root? what do you get when you type 'adb devices' ? You have usb debugging enabled while booted in android?
Click to expand...
Click to collapse
Device says unlocked. Im good there. When i install a recovery per the suggested install it says written but when i try to go to it i get the aNDROID sitting there with a yeild ! sign, so i have to reboot....somethings wrong cause when i try to get CWM to install it for me from the phone itself it says error flashing... any ideas?
EDIT : i didnt think about renabling debugging one minute
not sure that did anything.
Edit: i only had to install super user lol thanks for all ur help