Has anyone tried the new Rearth Slim cases? I am considering buying it. I can't post links because i don't have enough posts, but just search Rearth
http://www.rearthusa.com/Galaxy-S-2-ATT-Ringke-Slim-_p_279.html
there's the link for anyone else who wants to take a look.
I haven't tried this one so I can't help you but I figured i would post the link for you.
ive had it since mid october...it was the closest to incipio because they didnt have a case out yet...its all i need...slim..one rubber piece..easy on and off...does the job for me...id go for incipio though..theres comes with screen protectors
I've had the rearth case for about 2 months, I like it except when I got it it was slightly loose not enough for me to care but now its loosened to the point where the case is starting to cover the camera and if I push it up the mic and lower speakers are halfway covered
Sent from my SAMSUNG-SGH-I777
@nizda1:
Are you talking about the Ringke or the Ringke Slim? I have both. The Ringke is soft and pliable. I can see it loosening up. The Slim is quite rigid and snaps onto the corners of the phone. The top and bottom are covered, along with the corners, but the sides are exposed down to the controls. This is quite a slim case!
Yea I was, just checked out the slim looks nice, how do you like it?
Sent from my SAMSUNG-SGH-I777
Ooo, I kinda like this one! Can make our black units, pretty much white and it covers the whole back! But $25...
I've had it on since since day 1. Love it.
I like it better than anything I've tried to date. It's about the "least" amount of case that I've seen. About the only thing that I would change is that being glossy, the back is beginning to show some very minor scratching from being set down on hard surfaces. If Rearth offered it in a matte finish I'd be all over it.
Just bought that case in Noble Black. Will review it upon arrival.
i have used this case and the SGP Neo.
This case is excellent. It's as minimal as can be, fits well, and looks good.
Good case!
Good to hear fellas.
It'll be here tomorrow, according the tracking from the shipping. Anything I ever ordered that goes through the post service always arrives the day after it goes through this one center.
Is it a little sad that I'm mildly excited for this to come?
Guys just to let you know after three months of having this case with my Atrix it was stretching out also the texture came off the case kind of like a clear coat coming off on a car
Sent from my SAMSUNG-SGH-I777
This is a hard plastic case. Its not going to stretch.
Sent from my SAMSUNG-SGH-I777 using XDA App
33t said:
This is a hard plastic case. Its not going to stretch.
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
your right i was think of there silicon one
Nice find!
Just a quick question to anyone who actually has the case -- does it cover the top mic next to the headphone jack, or is the cutout correct for our version?
pinoymutt said:
Nice find!
Just a quick question to anyone who actually has the case -- does it cover the top mic next to the headphone jack, or is the cutout correct for our version?
Click to expand...
Click to collapse
This, along with their newer silicone case for the i777 are supposed to have the correct placement for the noise cancelling microphone.
Just got mine in. It does have the mic cut out next to the headphone jack.
Just got mine. Overall I'm digging it. Case is thin and probably doesn't offer much in the way of protection buy that's the price to pay for looks. It being black shiny hard plastic I already see two scratches. Just got to make sure not have the case in the same pocket as my keys and ill be good.
Related
Got her for 5 bucks on amazon. Fits perfectly and looks awesome. Very thin low profile i like it. Best way to get the whole for the mic is a small nail and a lighter, get it hot goes through like butter
http://www.amazon.com/gp/product/B005IT3RXU
Picked up this too for 3 bucks fits perfect too.
http://www.amazon.com/gp/product/B0051PD826
and waiting for this one still...
http://www.amazon.com/gp/product/B005HQJ3ZU
too many...i think not
Got any pics of the solid black TPU case? Bought the $35 TPU case with leather from ATT today and am regretting paying that much.
All of those have to be modified to open up a hole for the noise cancelation mic.
$16.99 Free Shipping.
More of a skin than a case. Really nice feel/texture. Fits like a glove. Not loose, baggy, or bulky.
http://www.rearthusa.com/Galaxy-S-2-ATT-_p_275.html
Great review here. http://www.youtube.com/watch?v=t8c0oLjVQ1A
This is what Target has for the SGSII AT&T:
Belkin Case ($20)
Belkin Screen Protector ($15)
can you make it a little smaller. I cant see anything
runtohell121 said:
This is what Target has for the SGSII AT&T:
Belkin Case ($20)
Belkin Screen Protector ($15)
Click to expand...
Click to collapse
Any links to an online store? Can't find it in target.com
Sent from my SAMSUNG-SGH-I777 using xda premium
runtohell121 said:
This is what Target has for the SGSII AT&T:
Belkin Case ($20)
Belkin Screen Protector ($15)
Click to expand...
Click to collapse
I have both of these. The case is okay but the buttons are very hard to press. Fit is decent. I am taking my case back. The screen protectors are good. Fit is good but takes some work to make it perfectly aligned so they don't bubble on the edges.
EpicEric said:
$16.99 Free Shipping.
More of a skin than a case. Really nice feel/texture. Fits like a glove. Not loose, baggy, or bulky.
http://www.rearthusa.com/Galaxy-S-2-ATT-_p_275.html
Great review here. http://www.youtube.com/watch?v=t8c0oLjVQ1A
Click to expand...
Click to collapse
Yea I have one of these on its way in Maroon
---------- Post added at 10:05 AM ---------- Previous post was at 10:02 AM ----------
I would rather modify a sweet case then choose from the few unattractive ones available any day.
I have these on the way from ebay - $16 and $6 respectively.
h - ttp://img1.jpegbay.com/gallery/001012668/1_f.jpg
and...
h - ttp://img1.jpegbay.com/gallery/001197451/1_f.jpg
"case_ology" got loads of i777 specific cases, they say...
and yes, i do love orange!
-=s=-
I also purchased the 3$ case from Amazon (with shipping). Very good fit. Too bad I was walking to the mailbox to get the case and dropped my phone! ahh... At least I didn't crack the screen.
Just got my ringke GS2 ATT case from today and its awesome. There is also a mic cutout for the noise cancellation mic. The texture and feel is nice and smooth. The case is very detail and it is really slim. Loving this thing on my phone. I might just get the screen protector too.
I've had this one for a little over a week now and love it. It's the highest quality TPU case I've tried on anything so far. The trim around the bezel fits tightly, there's a top mic cutout for AT&T, and the volume button overlay is easy to press. The power/wake button is just a cutout, which both makes it really easy to find and push but hard to accidentally press in a pocket. There were a couple of spots where there was a little extra material, but nothing an x-acto couldn't fix quickly.
$9.90 and Prime eligible for the matte version and screen protector.
http://www.amazon.com/dp/B005P0YJBG
(images are for 9100)
just got the $3 case from amazon its a perfect fit too. just need to mod the noise canceling mic part poke with a hot needle shud work.
but its too glossy for my taste lol keeping it on the desk for now xD
Just wanted to second this case. Very good case!
Video review I did of it on Amazon here: http://www.amazon.com/review/R6H4CNTEQROOB
pokey9000 said:
I've had this one for a little over a week now and love it. It's the highest quality TPU case I've tried on anything so far. The trim around the bezel fits tightly, there's a top mic cutout for AT&T, and the volume button overlay is easy to press. The power/wake button is just a cutout, which both makes it really easy to find and push but hard to accidentally press in a pocket. There were a couple of spots where there was a little extra material, but nothing an x-acto couldn't fix quickly.
$9.90 and Prime eligible for the matte version and screen protector.
http://www.amazon.com/dp/B005P0YJBG
(images are for 9100)
Click to expand...
Click to collapse
utoks said:
Just wanted to second this case. Very good case!
Video review I did of it on Amazon here: http://www.amazon.com/review/R6H4CNTEQROOB
Click to expand...
Click to collapse
Just bought that same case. can't wait to get it
I got that same tpu case from eBay. The only thing I don't like is that the volume rocker is really stiff and I'm contemplating cutting it off to reveal the actual buttons. Other than that really low profile and snug fit.
Sent from my SAMSUNG-SGH-I777 using XDA App
This is one of our SG II tpu's
pokey9000 said:
I've had this one for a little over a week now and love it. It's the highest quality TPU case I've tried on anything so far......
http://www.amazon.com/dp/B005P0YJBG[/URL
+1 just got this one and its AUsome.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
pokey9000 said:
I've had this one for a little over a week now and love it. It's the highest quality TPU case I've tried on anything so far. The trim around the bezel fits tightly, there's a top mic cutout for AT&T, and the volume button overlay is easy to press. The power/wake button is just a cutout, which both makes it really easy to find and push but hard to accidentally press in a pocket. There were a couple of spots where there was a little extra material, but nothing an x-acto couldn't fix quickly.
$9.90 and Prime eligible for the matte version and screen protector.
http://www.amazon.com/dp/B005P0YJBG
(images are for 9100)
Click to expand...
Click to collapse
I just received my case like this and I think it was a great buy for the money. My case fits perfectly and has the cutout for the mic.
Ok, so i've see a lot of great threads on cases and some really good reviews too and now my OCD is starting to kick in.
Which case is the best? I'm looking for something durable, light, and thin. Preferably TPU or some sort of soft and flexible material NOT silicone.
Pretty much i'm looking for the same case as what i had on my captivate, the mirage by bodyglove.
I've got a few different cases that i'm trying to decide between but i'm having a problem making the final decision.
I'm asking YOU, fellow SGS2-ers, to help me decide. Place your vote and leave a note (hey that rhymes!) and i will be sure to post a detailed review of the case if one hasn't been made already (or contribute to one that already exists)!
Thanks!
Here are the cases i am considering, in no particular order..
(sorry for all the links)
TPU-Case
http://forum.xda-developers.com/showthread.php?t=1300139
Rearth Ringke
http://forum.xda-developers.com/showthread.php?t=1292597
SGP Linear Color
http://forum.xda-developers.com/showthread.php?t=1340222
Case-Mate Barely There
http://www.amazon.com/Case-Mate-Barely-There-Samsung-Galaxy/dp/tech-data/B005E8MVHI
Taurus Bumper
http://forum.xda-developers.com/showthread.php?t=1308763
SGP Ultra Thin Air
http://www.sgpstore.com/cell-phone/...ung-galaxy-s2-case-ultra-thin-air-series.html
SGP Ultra Capsule
http://www.sgpstore.com/cell-phone/...sung-galaxy-s2-case-ultra-capsule-series.html
"Rubber Feel" Hard Case
http://www.amazon.com/AT-Samsung-Ga...BK/ref=sr_1_82?ie=UTF8&qid=1321285627&sr=1-82
I know a couple of these cases do not meet my own requirements but i have included them for the sake of others who might be considering the same.
And off we go!
Great roundup you've got there. I have the TPU-Case and love it, but hard to say it's the best without trying the others.
I would certainty recommend it though!
I've got the case mate barely there bushed aluminum and I really like it. I didn't think I would but I'm so. It's nice and thin and covers the phone well. It adds a little weight but to me it actually makes the phone feel better.
Sent from my SGH-I777 using Tapatalk
termleech said:
I've got the case mate barely there bushed aluminum and I really like it. I didn't think I would but I'm so. It's nice and thin and covers the phone well. It adds a little weight but to me it actually makes the phone feel better.
Sent from my SGH-I777 using Tapatalk
Click to expand...
Click to collapse
mine already broke by the volume rocker and the aluminum dents REALLY easily, its a very nice case though
I have this Incipio case:
http://www.myincipio.com/Samsung-Ga...-II-ATandT-NGP-Semi-Rigid-Soft-Shell-Case.asp
It is very nice quality, and fits perfectly. It does however have an small cutout for the international version's lanyard. It is really small though, so not too big of a problem. Some of the ones I have seen have the whole corner cutout for the international version (Ringke cases had this problem, which is why I did not choose that one). That seems like a huge problem to me, since if you drop it, the entire corner is exposed.
Hope this helps
I also have the Incipio and while it fits great (I did modify it to make a hole for the NC Mic), I'm not liking the extra effort required to turn the phone on or off. That action is already difficult enough with no case, but it's made even more difficult with the NGP.
Thanks for bringing to light this Incipio case. I just bought it. It looks like they fixed the problem with covered NC microphone. Now the cutout for it looks huge to fit AT&T and International version. Maybe they improved power button as well.
cincy1020 said:
I have this Incipio case:
http://www.myincipio.com/Samsung-Ga...-II-ATandT-NGP-Semi-Rigid-Soft-Shell-Case.asp
It is very nice quality, and fits perfectly. It does however have an small cutout for the international version's lanyard. It is really small though, so not too big of a problem. Some of the ones I have seen have the whole corner cutout for the international version (Ringke cases had this problem, which is why I did not choose that one). That seems like a huge problem to me, since if you drop it, the entire corner is exposed.
Hope this helps
Click to expand...
Click to collapse
cincy1020 said:
I have this Incipio case:
http://www.myincipio.com/Samsung-Ga...-II-ATandT-NGP-Semi-Rigid-Soft-Shell-Case.asp
It is very nice quality, and fits perfectly. It does however have an small cutout for the international version's lanyard. It is really small though, so not too big of a problem. Some of the ones I have seen have the whole corner cutout for the international version (Ringke cases had this problem, which is why I did not choose that one). That seems like a huge problem to me, since if you drop it, the entire corner is exposed.
Hope this helps
Click to expand...
Click to collapse
Thanks for linking that case, i haven't seen that one yet. I'll take a closer look at it and see if i can find a detailed review.
A quick google search led me to this good video review of the Incipio NGP (a TPU case). Looks to be a little dated though, the model they show on the Incipio webpage has a larger cutout for the NC mic and a color they didn't mention in the video. Still worth a look though.
Here's the video link, http://www.youtube.com/watch?v=qPJG6NEgj-M
I have a rearth case and am loving it, doesn't add much thickness or weight at all, u get 15 colors to choose from, doesn't collect dust, and has the hole for the 2nd mic. Overall very happy with this case.
Sent from my SAMSUNG-SGH-I777 using XDA App
I would like to see something come out in carbon fiber, like the Element Ion or Formula, but Element only does iPhone cases.
Hemlocke said:
I would like to see something come out in carbon fiber, like the Element Ion or Formula, but Element only does iPhone cases.
Click to expand...
Click to collapse
In all my searching i have yet to find a true carbon fiber case. I've seen plenty of cases with a carbon fiber "design" but they are just regular TPU or skins.
Take a look at these if you just want that industrial look..
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-Lifetime-Replacements/dp/B0058PLD8U
http://www.amazon.com/Kickstand-Protector-Samsung-Galaxy-Carbon/dp/B0065QWZ3S/ref=sr_1_4?s=wireless&ie=UTF8&qid=1321449832&sr=1-4
http://www.amazon.com/Battery-Samsung-Galaxy-Mirror-Carbon/dp/B0067RICBY/ref=sr_1_7?s=wireless&ie=UTF8&qid=1321449832&sr=1-7
http://www.amazon.com/Carbon-Fiber-Samsung-Attain-i777/dp/B005VURJDA
bbubel said:
I have a rearth case and am loving it, doesn't add much thickness or weight at all, u get 15 colors to choose from, doesn't collect dust, and has the hole for the 2nd mic. Overall very happy with this case.
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
I was heavily considering the Rearth Ringke but i read about some people having trouble with the case splitting apart on them due to small drops (see the Ringke thread here) and i decided to go with the SGP Ultra Capsule instead. I might also pick up the TPU-Case from Amazon just for the sake of having something to compare the SGP against.
I get super slow shipping so i'll put some pictures up in a week or so.
So I'm gonna upgrade to the HTC droid DNA in two weeks and have been trying to look for cases to buy for it. I saw a couple good ones that I'll most likely get but I'm a little bit bummed that there's not that many cases out there for the DNA.I've looked at amazon and eBay and both of them are selling about the same cases as the other kinda wish there was more selection cases for this phone..
But..all in all I'm excited to upgrade to this phone
I got the one they sell at the Verizon store its pretty nice got a kickstand. I don't use the holster.
Sent from my HTC6435LVW using xda app-developers app
You can design your own DNA case here http://www.cellphoneshop.net/htcdroiddna-ocase.html
I got the minisuit flex from amazon for about $5. I love it. Very snug fit. Barely noticeable.
Sent from my HTC6435LVW using xda app-developers app
I'm really, really happy with my seido surface. It's pretty thin and doesn't hide the sleek shape of the phone, but it still protects the screen somewhat and I feel like my phone is safe using it.
I'm thinking if getting the incipio feather case http://www.amazon.com/gp/aw/d/B00AMAJCTS/ref=mp_s_a_1?qid=1361761617&sr=8-1&pi=SL75 trynna look for the cheapest place I can get it though either that or the diztronic case http://www.amazon.com/gp/aw/d/B00A9YJ48Q/ref=mp_s_a_1?qid=1361761751&sr=8-1&pi=SL75
Or maybe this http://www.amazon.com/gp/aw/d/B00A7HYB3S/ref=mp_s_a_1?qid=1361762044&sr=8-3&pi=SL75 its an aluminum sticker like that covers the whole phone I'd figure this can act as my case at the same time keep the full feel of the slim design of the phone
marcviado said:
I'm thinking if getting the incipio feather case trynna look for the cheapest place I can get it though either that or the diztronic case
Click to expand...
Click to collapse
I have a Incipio feather in BLK FS, its in really good condition, maybe 1-2 scratches... only used it for 1-2 weeks Only $10 shipped to you b/c I just bought a red case.
Let me know! Thx!
irockthebear said:
I have a Incipio feather in BLK FS, its in really good condition, maybe 1-2 scratches... only used it for 1-2 weeks Only $10 shipped to you b/c I just bought a red case.
Let me know! Thx!
Click to expand...
Click to collapse
Maybe..can you send or post pics for me?
marcviado said:
Maybe..can you send or post pics for me?
Click to expand...
Click to collapse
See pix attached, comes w/ the box also.
That's nice, does it come in black? Can you show pics with it on the phone?
Sent from my HTC6435LVW using xda app-developers app
I have the Seidio Active Case and absolutley love it. It gives you some real protection while adding some color and also offers a verticle belt clip that is compatible with the case.
i serching a Bag for the DNA have already ordered two, but none fit only for the butterfly because it fits, aahh
KyJelly69 said:
That's nice, does it come in black? Can you show pics with it on the phone?
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
See attached for the feather pix
Free if anyone in the Bay Area wants to teach me how to root the DNA.
I got the Seidio surface case too, I dont like the form factor as much as the Feather, the feather is more stylish IMO, the color on the Seidio is clearly superior but the case is thicker so it adds more bulk. I wish the feather came in red.
One thing to make sure on DNA when purchasing a case is that it has a hole on back so you can see the rear notification light....a lot of cases on the market don't have the extra hole...
Sent from my DNA using xda app-developers app
Does anyone wirelessly charge their DNA with the case on? I have an otterbox commuter case and have zero issues other then the charging. I noticed the DNA gets hot but then I noticed the rubber inner liner of the case. Anyone else have this issue?
just got the poetic palette slim case. nice fit, all the right holes (lol), very sleek. not much for protection if you drop the phone, but thats not going to happen (knock on wood)
RKnight1983 said:
I have the Seidio Active Case and absolutley love it. It gives you some real protection while adding some color and also offers a verticle belt clip that is compatible with the case.
Click to expand...
Click to collapse
I realize this case is two pieces, a silicone piece and an outer hard shell. Is this hard shell metal or plastic? This case looks amazing, I've been eyeballing the red and black one to match the phones aesthetics, but the price is kinda steep. Thanks
Also one last thing, how much space is left around the headphone jack? My headphone jack has a wide plastic surrounding that doesn't allow me to insert the headphones all the way into the port while the case is on.
---------- Post added at 06:33 PM ---------- Previous post was at 06:14 PM ----------
The first case I got was the Diztronic. This was an excellent case, very very snug, it looks great and provides great protection. I also use a screen protector and I found out that the Diztronic fit so snug that it pushed up the edges of the screen protector. If you cut the corners of the screen protector this can remedy this problem. Another issue I found with the Diztronic was the headphone jack. I use Shure SE215 headphones, the jack input is very wide. With the case on the headphones wouldn't stay fully inserted. I did however find it very easy to cut the case around the headphone jack to allow the input to stay seated properly.
I've moved on to the Body Glove Dropsuit, this case is awesome. Like the Diztronic, it looks great, provides superior protection, allows access to the power and volume keys very easily (almost too easy), microphone and speaker cutouts and allows me to use an edge to edge screen protector. I've been using this case for several weeks now.
Note that both the Diztronic and the Body Glove DO NOT have a cut out for the notification light on the back of the phone.
Hope this helps!
Seidio Surface
I got the Seidio Surface case in black (not gonna worry about photos, I'm sure several exist on here or the web), and I am overall happy with it. It fits very nicely, doesn't add a lot of bulk, and all features are visible (lights and stuff).
One thing I am very happy about is the fact that it makes the power and volume buttons a little harder(?) to press. This makes me less likely to inadvertently run the ringtone volume down to silent just by picking up the phone, and I can put it into my backpack or lunch bag without pressing the power button and turning the screen on.
One slight irritation is that it caused the screen protector - which completely covers the screen - to bubble up on the edges where the case touches the screen edge, but that is minor - I could just trim the screen protector a little, if I was so inclined...
I like this case.
- Shane
I have the Otterbox defender. No worries about the safety of my phone. It also feels thin because it's way thinner than my old bionic case.
Sent from my HTC6435LVW using Tapatalk 2
Here is my quick review of the new Incipio DualPro Case. First I want to say sorry for the blurry pics. Wasn't taken with the best camera, but I wanted to get this up now.
Right off the bat this case feels great. It's almost gel-like. It's made of a hard shell, and very soft inner part, but both feel the same. It's like a feltish feel. Reminds me of the Nexus One's back. Even though it was hard plastic, it had that soft touch feel to it. The buttons are extremely easy to press thanks to the soft inside material being the cover instead of the hard outer shell, or individual pieces like the Spigen Neo-Hybrid. The overall thickness is also less compared to both the Neo-Hybrid and the Spigen Slim Armor. It almost feels like the naked phone without a case.
The cutouts are spot on too. Just like the Slim Armor. No complaints overall. Again the headphone port has a deep cutout, so you will need an extension, or just use headsets with thin jacks. Anything larger than the headphones that came with it won't fit. The camera is tucked in just enough, so there is no fear of it contacting any surface when put down, and the front is thick enough to protect any sort of surface if laid face down. I'm really happy with this case. For me it's a toss up between the Slim Armor and this with the Neo-Hybrid last. Both the Slim Armor and DualPro feel great in the hand, but the DualPro feels a bit better with the super soft touch feel. Great case that you can't go wrong with. The color is Cyan.
http://www.incipio.com/cases/samsung-smartphone-cases-accessories/samsung-galaxy-note-3-cases.html
More pics.
Even more pics.
bobbyphoenix said:
Even more pics.
Click to expand...
Click to collapse
Thanks for the pictures & review, this may be my kind of case. One question though, how is the gripping on the sides? All I need in a case now is one that provide sufficient grip, since the Note 3 is so thin and slippery on the sides that sometimes it literally slides off my hands/grip.
The grip on the sides Isn't super slick but I wouldn't call it grippy either. I'd try and check it out in a VZW store first hand. My only complaint is the TPU insert doesn't have much rigidity around the home button and the speaker. So it snags and doesn't stay snug so to speak.
I'm probably going to return mine when my Uag arrives
Sent from my SM-N900V using Tapatalk
phiquantu said:
Thanks for the pictures & review, this may be my kind of case. One question though, how is the gripping on the sides? All I need in a case now is one that provide sufficient grip, since the Note 3 is so thin and slippery on the sides that sometimes it literally slides off my hands/grip.
Click to expand...
Click to collapse
This is the only case so far that I'm really having an easy time holding. The Slim Armor was the best I thought, but this one is just a perfect increase in size over the naked phone. The rubbery texture is more than enough to grip. When you first put it on it may feel a bit slippery, but it's just the talcom powder they use in the molds for the silicone to be easy to get out. I wiped mine down, and now it's a soft rubbery grippy feeling case. I really like it a lot. Plus the sides are curved. There are no corners that you need to grip against like the Neo-Hybrid or Slim Armor. It's a very natural feeling to hold it since your fingers wrap the entire case. One bonus feature I found for me is the entire bottom is the very soft inner case, and the way I hold the phone I tend to put my pinky under the bottom as a brace. The soft gel really is easy on my finger. The other two case are hard on the bottom, and I would have to keep moving my pinky to stay comfy.
james_f said:
The grip on the sides Isn't super slick but I wouldn't call it grippy either. I'd try and check it out in a VZW store first hand. My only complaint is the TPU insert doesn't have much rigidity around the home button and the speaker. So it snags and doesn't stay snug so to speak.
I'm probably going to return mine when my Uag arrives
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
That's a good additon to mention. The top and bottom are both just the soft inner case. There is no hard outer shell to keep it pressed against the phone, so if you tend to put it in your pocket I can see it getting caught and pulled when you try to pull it out, but overall with it being on the case and used, it doesn't "wobble or flipflop" by itself. It's stiff enough to stay put, but easy enough to pull away with a slight tug.
Ah yeah I wasn't clear. It stays put until it snags coming in and out of my pocket. It's merely an annoyance.
My favorite thing about the case is how comfortable it is. Holding the phone naked now feels sharp and uncomfortable.
Sent from my SM-N900V using Tapatalk
Looks great!! Thanks for the review and your initial thoughts on it! Looks really good on your white GN3! I also bought a white GN3, so this is perfect for keying me know how this will look on mine! Thank you!!
One thing, you should put a link in the OP so readers can easily find this case, instead of having to search the web for it. Other than that, which you can easily fix with an edit, excellent review!
Sent from my White Sprint Note 3 via XDA Premium
stanglifemike said:
Looks great!! Thanks for the review and your initial thoughts on it! Looks really good on your white GN3! I also bought a white GN3, so this is perfect for keying me know how this will look on mine! Thank you!!
One thing, you should put a link in the OP so readers can easily find this case, instead of having to search the web for it. Other than that, which you can easily fix with an edit, excellent review!
Sent from my White Sprint Note 3 via XDA Premium
Click to expand...
Click to collapse
Link added to OP.
How'd you get your case so quickly? I pre-ordered directly from incipio.com about 2 weeks ago and still haven't received a shipping notice.
EDIT: Oh, apparently the blue and pink versions are shipping NOW, but the neutral white and black versions are taking a little longer. Ah well.
zmore said:
How'd you get your case so quickly? I pre-ordered directly from incipio.com about 2 weeks ago and still haven't received a shipping notice.
EDIT: Oh, apparently the blue and pink versions are shipping NOW, but the neutral white and black versions are taking a little longer. Ah well.
Click to expand...
Click to collapse
I'm special. LOL Yeah just as your edit said. I check sites daily, and when I see them in stock I order ASAP. That's how I get all my case in before everyone. I check first thing in the morning (around 8). I find I can order in the morning with "in stock" stuff, and by afternoon they are already out of stock.
I picked up my black case at a Verizon corporate store
Sent from my SM-N900V using Tapatalk
I picked up a DualPro SHINE, Brushed silver color, from the Verizon store, They were able to pick up the day note3 came out. They still sell them, It's a the best over the counter case you can get IMHO at the moment.
How does this case compare to the spigen bounce? I just ordered the bounce to try it out.
I loved this case on my SG4 but it was a Lint & Dust magnent. I think there is a correlation with most cases....the grippier the case...the more dust and lint it will attract. Just got a UAG case for my new note 3 and it sits perfectly inbetween Grip and Lint spectrum!
Just ordered mine from amazon. How easy / not easy is it to quickly take off and put back on? Like if I wanted to swap batteries in my phone, would it be this whole ordeal? Thanks
Sent from my DROID RAZR using xda premium
It's very easy. One of the best cases if you need to do that. When it's on it's on good, but no fear of breaking something if you have to take it off.
Sent from a Galaxy Note 3 far, far away....
My older brother had the Shine version of the Incipio DualPro for his Galaxy Note II and it was pretty bulky with no easy way to take it off. I have the Spigen Slim Armor for my Galaxy Note 3 and considered it superior until I noticed a crack in the armor yesterday. It has never been dropped so I am pretty sure that it was caused by taking the phone in and out daily. I do this carefully one side at a time and push through from behind (camera opening) but it happened anyway. I would hope that the Note 3 version of the DualPro is easier.
Also, it was rounded so it probably wouldn't fit a flat metallic plate insert like the nGroove Snap uses. He also tried it with a Qi wireless receiver I sent him and it doesn't work through the case. I hope the Note 3 version is thinner.
Sent from my SM-N900T using Tapatalk
Hello XDA,
Im looking for a case that will protect the nexus 6 from minor drops and that i will be able to enjoy from its beatiful desing and its white color.
I dont want the case to hide the white color on the back and the "NEXUS" writting. It will be great if the case could seal the audio input to prevent it from getting dirt and eventually ruining it.
I dont mind if the case will make my phone bigger or heavier by much.
Highly prefer Mat material and not plastic because plastic fealing makes my hand sweat.
Could you please recommend me a good case that fits my needs?
Appreciate any help offered!
I got this one and like it. Transparent back and choice of color for the sides. Cutouts are accurate.
http://m.ebay.com/itm/201211908726?nav=SEARCH
Sent from my Nexus 6 using Tapatalk
Its up to you, there is no "best transparent case" but there are many good choices.
Here are my favorites for clear/transparent casesmost of my cases are clear/transparent)
SUPCase (frosted clear PC back with TPU bumper)
TUDIA ( TPU Clear top and bottom with a matte clear back
Cruzerlite (clear back and sides TPU with android logo on back)
Evecase (100% clear TPU case but the buttons are hard to push)
Ringke Fusion (hard PC back with TPU bumper)
I'm a big fan of my Orzly Flexislim. It's the frosted clear color. There's also a smoky black one out there but since you've got a Cloud White I figure this is most applicable to you.
Here's an Imgur album of photos I snapped for someone else to review: http://imgur.com/a/1glfT
sosquidtaste said:
I'm a big fan of my Orzly Flexislim. It's the frosted clear color. There's also a smoky black one out there but since you've got a Cloud White I figure this is most applicable to you.
Here's an Imgur album of photos I snapped for someone else to review: http://imgur.com/a/1glfT
Click to expand...
Click to collapse
How are the buttons? It looks good except for the huge microphone hole.
Pilz said:
How are the buttons? It looks good except for the huge microphone hole.
Click to expand...
Click to collapse
Buttons are probably my least favorite part of the case. It's just cut-outs, and the material left around the cutouts is pretty thin. I'm not afraid it will tear or anything, just that they are the two bits of wiggliness on the otherwise solid case.
On the plus side all the sides (both top and bottom) are covered all the way around which is nice. This is in contrast to cases like the Bear Motion sandstone case or other similar snap-on cases that leave the top and bottom exposed.
sosquidtaste said:
Buttons are probably my least favorite part of the case. It's just cut-outs, and the material left around the cutouts is pretty thin. I'm not afraid it will tear or anything, just that they are the two bits of wiggliness on the otherwise solid case.
On the plus side all the sides (both top and bottom) are covered all the way around which is nice. This is in contrast to cases like the Bear Motion sandstone case or other similar snap-on cases that leave the top and bottom exposed.
Click to expand...
Click to collapse
Eh I was hoping they would be covered. I just ordered two more cases because I'm a case whore when I get a phone. I bought a Spigen Ultra Hybrid (the all clear version) I'll post pictures when it arrives Monday. I also bought a Diztronic ultra
Thanks for your replys guys. You've helped me alot. I'm debating between the Ringke FUSION case and the Ringke MAX case. It seem they are the two that best fits my needs. The only thing that prevents me from getting the FUSION over the MAX is that im not sure the case will feel good in my hand. I tend to sweat in my hands specially holding cheap plastic so i fear ill have it with the FUSION case. Is there anyone here that has the FUSION and can share his expirience about the material and grip of the nexus with the fusion case?
sosquidtaste said:
Buttons are probably my least favorite part of the case. It's just cut-outs, and the material left around the cutouts is pretty thin. I'm not afraid it will tear or anything, just that they are the two bits of wiggliness on the otherwise solid case.
On the plus side all the sides (both top and bottom) are covered all the way around which is nice. This is in contrast to cases like the Bear Motion sandstone case or other similar snap-on cases that leave the top and bottom exposed.
Click to expand...
Click to collapse
the cutout is my fav, in this way the buttons are flushed with the case. Preventing alot of accidental presses.
well, to each his own....this flexislim is my fav case at the moment. Just hope that it comes with more colors.
I just received my Ringke Slim clear yesterday. I dig it:
http://www.amazon.com/Free-Screen-P...20902817&sr=8-2&keywords=ringke+nexus+6+clear
I have Spigen ultra hybrid with clear back and gun metal sides, and the Ringke fusion clear. Still making up my mind which I prefer. The Ringke has caps for the headphone and USB sockets....the headphone one is OK but the USB takes a bit of fiddling to get it to close flush. I think I prefer the feel of the Ringke but the Spigen feels a little more solid. The Ringke is better for the buttons, there's a clear separation between the power and volume buttons. With the Ringke case there's a clear audible click when the buttons are pressed, which I don't get with the Spigen. Both cases work OK with my tylt vu charger.
bmw4l1f3 said:
I just received my Ringke Slim clear yesterday. I dig it:
http://www.amazon.com/Free-Screen-P...20902817&sr=8-2&keywords=ringke+nexus+6+clear
Click to expand...
Click to collapse
ericjennings said:
I have Spigen ultra hybrid with clear back and gun metal sides, and the Ringke fusion clear. Still making up my mind which I prefer. The Ringke has caps for the headphone and USB sockets....the headphone one is OK but the USB takes a bit of fiddling to get it to close flush. I think I prefer the feel of the Ringke but the Spigen feels a little more solid. The Ringke is better for the buttons, there's a clear separation between the power and volume buttons. With the Ringke case there's a clear audible click when the buttons are pressed, which I don't get with the Spigen. Both cases work OK with my tylt vu charger.
Click to expand...
Click to collapse
Those are excellent cases but its very important to me that the case will have caps for headphone and usb. I think ill go with the Ringke FUSION case.
torecdude said:
Those are excellent cases but its very important to me that the case will have caps for headphone and usb. I think ill go with the Ringke FUSION case.
Click to expand...
Click to collapse
Curious as to why you would want them covered? (asking as I may want to follow suite)
bmw4l1f3 said:
Curious as to why you would want them covered? (asking as I may want to follow suite)
Click to expand...
Click to collapse
As you can see in my signiture, i had Motorola atrix 4G as my daily driver before the Nexus 6. I didnt use the audio port quite much and it got ruined by the dust overtime. Same thing about the hdmi port but not the usb port.
I had the atrix for almost 3 years and those port got ruined twice after i repaired them. If i took the atrix to the beach i noticed it always got sand into the port even i didnt took it out from my backpack. Sand can get in from the tiniest holes and i plan to use the nexus 6 for a long time, therefore i wanna make sure i get the best suitable case for me.
Cheers.
Huge fan of the Cruzerlite cases. I have the clear one on my N6 now and it's great.
EDIT: I'm using a Dbrand skin, so I switched to Ringke Fusion Crystal so I could see the skin more clearly on the back. Fantastic clear case.
Tried due diligence and to search for the right thread.
I picked up the Fosman case on Amazon, one of the cheapo $10 ones, and it's turned out pretty great. Love the matte/frosted back, though I wish it were a bit more transparent so the black came through better. Good purchase, though I'm sure all of these TPU / cruzerlite / whatever companies are pretty much selling the exact same product.
torecdude said:
Thanks for your replys guys. You've helped me alot. I'm debating between the Ringke FUSION case and the Ringke MAX case. It seem they are the two that best fits my needs. The only thing that prevents me from getting the FUSION over the MAX is that im not sure the case will feel good in my hand. I tend to sweat in my hands specially holding cheap plastic so i fear ill have it with the FUSION case. Is there anyone here that has the FUSION and can share his expirience about the material and grip of the nexus with the fusion case?
Click to expand...
Click to collapse
I hav both and they both have good grip on the sides and are a bit slick on back.
Two others you might want to consider are the uag maverick and the poetic affinity. They both have threads here so search and read about them. I have the uag and like it but the back is a little ugly imo. I will be getting the poetic tomorrow, and yes, I have a problem with buying cases. I want to keep my Max incase I want to go back to it but I have a clear fusion I could send you for the price of shipping if you'd like. Send me a pm or email if you're interested.
bmw4l1f3 said:
Curious as to why you would want them covered? (asking as I may want to follow suite)
Click to expand...
Click to collapse
I cover my ports also to keep crap out..even if you find a case you like but it doesn't have covers you can always spend a couple bucks and grab silicone port plugs online... I use them when not in my OtterBox on my Note and they work well.
kingston73 said:
I hav both and they both have good grip on the sides and are a bit slick on back.
Two others you might want to consider are the uag maverick and the poetic affinity. They both have threads here so search and read about them. I have the uag and like it but the back is a little ugly imo. I will be getting the poetic tomorrow, and yes, I have a problem with buying cases. I want to keep my Max incase I want to go back to it but I have a clear fusion I could send you for the price of shipping if you'd like. Send me a pm or email if you're interested.
Click to expand...
Click to collapse
How did you like the UAG compared to the Ringke Max? I have the Max now and while I like it I find it a bit slippery on the back, so now I'm gonna try the UAG.
jaggrey said:
How did you like the UAG compared to the Ringke Max? I have the Max now and while I like it I find it a bit slippery on the back, so now I'm gonna try the UAG.
Click to expand...
Click to collapse
They are both very good cases. The UAG is a little slimmer maybe, but not much. I might actually go back to the Max, I haven't decided yet. I think if you like the one you'll like the other. I guess the one advantage the UAG has is, even though it's still slick plastic the indents on the back give a little more grip, and the volume buttons feel better.