My new N router, FritzBox 7390, has N freq.
My laptop gets around 170Mbit, my streamer gets 300Mbit and my phone only 65mbit.
Its 2,4Ghz freq. transmits b\g\n and 5GHz transmits n\a.
I thought maybe the short distance or anything like that, but even when they're almost attached one to the other - only 65mbit.
reception is great- all bars appears in status bar.
Any ideas why?
Im on Stock 2.3.5 KI8 rom and speedmod k2-13, if it matters.
Related
Got my S2 and loving it but having a problem with its wifi performance.
It is running slowly ie on a n network speed test gives between 0.1 and 1 MBs down upload seems fine tried different channels etc. Killed all others apps in task manager disabled background snyc, but no difference
Then tried a different wifi access point on my network with similar results so it seems to be the phone. In comparison my wifes phone is consistently around 5 times faster download speed. sucks not to be able to use my new toy properly Any ideas before it goes back?
Thanks
DonkQuixote said:
Got my S2 and loving it but having a problem with its wifi performance.
It is running slowly ie on a n network speed test gives between 0.1 and 1 MBs down upload seems fine tried different channels etc. Killed all others apps in task manager disabled background snyc, but no difference
Then tried a different wifi access point on my network with similar results so it seems to be the phone. In comparison my wifes phone is consistently around 5 times faster download speed. sucks not to be able to use my new toy properly Any ideas before it goes back?
Thanks
Click to expand...
Click to collapse
is your router capable of sending G and N signal at the same time? u may have to change either a setting on ya phone to just pick up G or a router setting, this wont be your phone, i work for an isp, see this all the time 1 pc or laptop is N router is N and 2nd pc is G or even B and this causes problems
Thanks for the reply changed the router to n only and the phone is the only device connected still painfully slow. Then tried b/g and the speed test is much faster. Looks like the galaxy dosn;t play nice with the n router I have (home hub 3 from bt)
DonkQuixote said:
Thanks for the reply changed the router to n only and the phone is the only device connected still painfully slow. Then tried b/g and the speed test is much faster. Looks like the galaxy dosn;t play nice with the n router I have (home hub 3 from bt)
Click to expand...
Click to collapse
Some routers with n were released with support for the draft spec. It's possible your router only supports a version of the draft n spec and thus isn't fully compatible with the SGS2 which would be full n spec compatible. Your router may have a firmware update that would give it full n spec. It would be worth a quick check.
Sent from my GT-I9000 using XDA App
StickyGeko said:
is your router capable of sending G and N signal at the same time? u may have to change either a setting on ya phone to just pick up G or a router setting, this wont be your phone, i work for an isp, see this all the time 1 pc or laptop is N router is N and 2nd pc is G or even B and this causes problems
Click to expand...
Click to collapse
Great information! Thank you.
It is a new router only a month old so pretty sure its not draft n. Thanks for the suggestion though
Sent from my GT-I9100 using XDA App
Does anyone know if the SII's N wifi works on the 5GHz band? My wifi network with my PC is solely on 5GHz as get fewer disconnections and constant speed through my fibre connection then with 2.4GHz.
Thanks
According to this it supports Dual Band:
http://pocketnow.com/android/samsung-galaxy-s-ii-supports-dual-band-wi-fi-80211n
which was based on this
http://certifications.wi-fi.org/pdf_certificate.php?cid=WFA11164 (does not work in Chrome)
I'm thinking the wifi performance could be poor just like the wifi performance on the Samsung Nexus S phones is. The Nexus S wifi is pretty poor. Does your signal strength show it being full or weak? On the Nexus S you could be 2 feet away from the router and it would still show weak reception.
p4nts said:
According to this it supports Dual Band:
pocketnow.com/android/samsung-galaxy-s-ii-supports-dual-band-wi-fi-80211n
which was based on this
certifications.wi-fi.org/pdf_certificate.php?cid=WFA11164 (does not work in Chrome)
Click to expand...
Click to collapse
Thanks mate, exactly what I was hoping. I'll post a review of the performance using my 100MB fibre connection as soon as I get the phone and let everyone know how it degrades around my house.
I did a search and couldn't find anything definitive, so hopefully some of you can help me here
I've accepted the fact that my TFP won't get stellar wifi speeds but I guess what I can do is tinker with my router to ensure that it's maximizing its signal and throughput.
I have the Linksys WRT-320N router mounted high up on my wall in my 2 bdrm apt. When I'm next to the router, I get a pretty consistent 15mbps up/down but it trickles off to about 5 from my bedroom about 30 ft. away. My concern is that it's rated for a lot more than 15mbps, and my wired internet gets about 100mbps up/down, so surely it must be a router setting?
I've disabled QoS and tried various channels but besides that, I haven't done much. Are there particular recommended settings that I can play with to try to maximize my speeds? I also made sure my firmware is up to date on the router and have reset it a few times.
A question for you: why did you disable QoS?
How about using QoS to maximize wifi output/priority to your prime when its connected?
Why would you even use qos just for your prime? That's like a 6 lane highway and only allowing one car at a time. It's pretty useless.
I doubt you'll get any difference at all. Qos only prioritizes traffic so that more important traffic can pass first.
Try unlocking your prime and installing another rom, try another router, or move your router to a center location. You could try to update your firmware or even see if you can find any custom firmware for your router.
QoS has always been a pain in the ass so I would disable regardless.
But ASUS does need to publish their findings on recommended settings to optimize performance.
i disabled QoS based off another post about smoothing out the throughput from the router. either way, i've noticed neither a positive or negative result of this.
as far as custom firmware, i'm looking into the dd-wrt route, but would want to tweak the router with the stock firmware as much as possible to see if i have to resort to doing custom
Chances are the limitation will be the transformer's wifi chipset. If you flash your router with dd-wrt you might be able to get slighty better performance.
Don't know that its worth the effort. 5 mb/s is adequate for almost all web except downloading large files and vnc. My experience has been if you want performance your pretty much stuck with something that has gigabit lan.
Sent from my EPAD using XDA Premium HD app
Hi guys,
I've got a question for you, my fellow Flyer users.
Recently I got a new Modem/Router from my ISP.
I installed everything and it all works without a hick up.
After the installation I tested the internet speed using the Speedtest.net site.
On both my Windows laptops an my wives Macbook the speed was excellent, about 40 Mbps download and 2.5 Mbps upload and a 15 ms ping.
Same on the Ipad 3 we have.
However, on my HTC Flyer I only get between 5 and 10 Mbps download but I do get 2.5 upload but the ping is nearly 100 ms.
Does anyone have a clue what the problem could be or what app I can best use to see whats up. I now think the Flyer only connects in WiFi B mode instead of G or N. And it has been doing this all the time. I used to think the browser was slow but I now think this might be the problem. Is there any way to change this forcefully?
The router is a Cisco EPC3925 and I use WPA2 TKIP-AES security. It's on channel 1, 40 Mhz wide (wide channel 5) and in 2.4 Ghz mode ...not 5 Ghz.
Hope you can help.
Cheers,
Martijn
Try to use channel 11....strange enough this helped me in the past when I had several problems with my wi-fi network. Otherwise you could try this....go to the wi- fi settings on you flyer, choose Advanced and then choose the first option.
Tried channel 11 and it doesn't make a difference.
Connection speed also varies alot.
My laptops and the Ipad have good speed everywhere in the house.
But the HTC only in the proximity (< 4m.) of the router. And even then it is still way slower than the other devices. If I move further from the router the speed collapses.
Best I get is about 28Mbps while the others get around 38 and up to 52 Mbps.
Shame, I had a higher expectations of the Flyer.
Next I will put my old Belkin N router in the network as access point and see what happens.
First time I ever heard anyone complain about 20Mbs. you sure you got those numbers right? Most of use don't have a ISP that can even approach that. So you will get little sympathy. Anyway ping should only be between your router and the external IP, so whats up with that? Speedtest.net is a poor way to measure device performance since there are so many factors in between. Use a local lan speed test or you might just be measuring browser speed and nothing to do with the hardware.
I've seen a similar behavior some time ago.
Here is what I've got:
Speedtest on my desktop gives me about 20-25M
I turn my Flyer on, run the test, I get 4-6M.
I turn Airplane mode on, turn it off, test the speed. I get 20-25M.
I'm guessing throughput got something to do with the sleep mode.
Hi all,
First of, I'm talking about Mbps (Mega bits per second) NOT MBs (Mega Bytes per second). Huge difference there.
And 20 Mbps is of course a good speed, but its unsteady and way slower than the other devices.
As I wrote before my Ipad and laptops never go below 35 Mbps and I'm lucky if I get the Flyer over 20 Mbps. With my ISP promissing about 50 Mbps thats a big difference.
So I'm just dissapointed with the performance of the Flyer which I thought to be a top of the line tablet.
So thats why I placed the thread. I tried the air plane mode thing and different channels, taking into account which are busy around me. But stil slower than the rest and alot of different readings between messurments. Even using my ISP speedtest app, even then same result.
But judging by the lack of respons I gather I am the only one. Pity I hoped for a solution.
Any thanks for taking the time to help me.
cheers
I get about 0.5mb/s speed on the local Wi-Fi network. I get up to 8mb/s on the computer (802.11N card). What about you? Maybe it depends on kernel/rom..?
Sent from my GT-I9100
Little answer please
Sent from my GT-I9100
You didn't get an answer because this info is easily found via a Google search Look for the SGS2 entry at Wikipedia, then follow the links to the article on the relevant WiFi standards.
Oh yeah "802.11 a/b/g/n Wifi" is it? Do you know which speed each of these letters is supposed to give..? I do, so i'm going to tell you that with 802.11n (which my router fully support) you're supposed to get up to 450mb/s. In reality you get let less, but it's still up to about 250mb/s, now you can even divide that by eight, which result in 31,25, far from 0.5 (the speed i get, if not lower, which my 1st post mention, did you read it fully..?) isn't it? Now you might see things that others don't, if so just tell me.
Hmm..?
Sent from my GT-I9100
It depends on many things. Bug in the kernel, faulty hardware, the distance from the router (phones have smaller antennae than laptops due to the size constraint, so laptops will constantly get higher strength signal than phones), faulty routers are all factors, if your phone is the only wifi device that's not getting the speed it should.
I don't know what the real life max speed of GS2 is, but I've hit somewhere between 20~50Mbps on a N router that has 1000Mbps internet connection (~750Mbps realistically, and I wasn't the only one connected to the router). So it should be able to get 8Mbps that your computer is getting, assuming the GS2 is right next to the router.
It doesn't change depending on placing.. And I can go faster when downloading. So I don't think hardware is défective..
Sent from my GT-I9100
Hi there,
I am running on latest Firmware by soldier and get insanely high ping times over WLAN (especially 2,4 Ghz wlan) sometimes 2000ms or more witch triggers our WiFi Monitoring at work.
Has anyone had a similar issue and maybe a h int why it is doing that?
It is somewhat like spikes so a few ping get through at acceptable ping times (30ms) but some spike out extremely or get lost completely. Even if it is in the same room as the AP.
Is this another exynos ****up?