Sorry for the noobie question but i'm thinking about intalling a custom rom on tab 10.1 and keep reading here to do a full wipe and to install cmw before flashing. How exactly I do a full wipe in the tab? And what is cmw?
thanks!
Is your tab rooted first?
No, it's in stock 3.1. I'm starting to get the picture but a post in that threat got me confused: http://forum.xda-developers.com/showpost.php?p=20022691&postcount=2966
he says: "but you wont neet to root to flash my rom. my rom does that for you. just flash cmw, then my rom, done!" but i dont get it, from the cmw intalation guides I read they all say you have to root your device before flashing it. So, do I have to root it or not?
Read this:
http://forum.xda-developers.com/showthread.php?t=1239185
Any questions now?
+1 s15274n's post. That's the guide I used and it couldn't be easier! If you have a 7510 install Galaxy Task v7 by 'Task650' after CWM installation then one of b00sted's themes, that's as good as it gets.
Related
welll i am a noob and just rooted my 2.2 vibrant and my cwr doesnt work and every time i click reinstall packages it says error on signature. I want the miui but im scared of bricking again. Please help!
First, read the noob article so you learn the basics.
http://forum.xda-developers.com/showthread.php?t=849028
Then after learning how to flash, use heimdall to flash the froyo rom link below, which has a modified stock recovery so you can flash the cwm recovery.
***When you get to this step, flash cwm recovery vibrant mtd 2.xx***
http://forum.xda-developers.com/showthread.php?t=937403
I know it's been adressed many times in different ways, but the info I found yet is not clear so I need a little help! I am trying to install the latest stable Cyanogen mod, using Gingerbread 2.3.7.
I have a Galaxy SII from Bell that I rooted and unlocked when I got it last november. It came on 2.3.3 and I flashed an official 2.3.4 on it, mainly to improve the battery life (and it worked). I did that using Odin and it went well.
Now I try to install Cyanogen mod through ClockworkMod ROM manager, I download and launch the install from ROM manager but on restart the install fails because of the classic 3E recovery message that says the whole signature cannot be verified.
I was having doubts if my phone was even rooted, but since it is still unlocked and software like Titanium backup runs fine, I guess that confirms it!! I am not sure what route to take from here...
Right now here are the phone details...
GT-i9100 on 2.3.4, FW I9100XXKG2, Kernet 2.6.35.7-I9100XXKG2-CL375027 [email protected] #2
I'll appreciate any help!!!!!!
JFChamp said:
Now I try to install Cyanogen mod through ClockworkMod ROM manager, I download and launch the install from ROM manager but on restart the install fails because of the classic 3E recovery message that says the whole signature cannot be verified.
|Question = Q&A
Looks like you are yet another that has not followed the instructions and flashed a cwm and root kernel .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
OR are not following the instructions posted .
First time flashing CyanogenMod 7 to the Samsung Galaxy S II, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Clockwork mod recovery see
NEW HERE
http://forum.xda-developers.com/showthread.php?t=1134290
The instructions work as i have just installed by following the instructions in reply to an exact same post .
jje
Click to expand...
Click to collapse
Thanks jje... The instructions did work! Tough I tought I had bricked my phone at one point, on the final restart it would get stuck at the Samsung logon screen, but I forced it back in recovery, re-flashed from the zip and then it booted in CyanogenMod!!!
I really appreciate your reply
Hey everyone,
i've got an i9300 device with 4.1.1 (XXDLIH) on it
I wanted to installed a custom rom on it (Omega ROM v38)
First i flashed CWM via Odin like in the instructions, after that i downloaded the rom put it in the sd card and booted the phone into CWM, i did the wipe and factory reset and choosed the rom zip for installing
After about 10 minutes the phone rebooted, but it is still on stock rom, so i thought what could the problem be and remembered that i need to root the phone first.
Now i have the problem that i can't (don't know), i don't know which way i should use for rooting so that i can afterwards install the Omega Custom rom ....
Note that i have now the CWM 5.5 recovery and don't know how to get back to stock recovery ...
Please if someone could tell me exactly what should i do, how exactly to root it and install the rom :/
Thanks everyone in advance
If you think that it would be better to install another custom rom then feel free to tell me
arnes_king said:
Hey everyone,
i've got an i9300 device with 4.1.1 (XXDLIH) on it
I wanted to installed a custom rom on it (Omega ROM v38)
First i flashed CWM via Odin like in the instructions, after that i downloaded the rom put it in the sd card and booted the phone into CWM, i did the wipe and factory reset and choosed the rom zip for installing
After about 10 minutes the phone rebooted, but it is still on stock rom, so i thought what could the problem be and remembered that i need to root the phone first.
Now i have the problem that i can't (don't know), i don't know which way i should use for rooting so that i can afterwards install the Omega Custom rom ....
Note that i have now the CWM 5.5 recovery and don't know how to get back to stock recovery ...
Please if someone could tell me exactly what should i do, how exactly to root it and install the rom :/
Thanks everyone in advance
If you think that it would be better to install another custom rom then feel free to tell me
Click to expand...
Click to collapse
Why not actually read the basics and follow the instructions first ???
BASICS
http://forum.xda-developers.com/showthread.php?t=1927113
OMEGA instructions
http://forum.xda-developers.com/showpost.php?p=32864050&postcount=27478
Slowly from the start download Omega rom and put it on your ext sd card .
Download a root and recovery file follow its instructions flash as PDA via Odin .
Boot to recovery
Locate Install install zip from Ext SD card and choose options .
>>>>>>>>
If you want stock recovery flash stock rom via Odin .
jje
Hey everyone. I decided to revive my S2 but I ran into a problem and I can't solve it. I lost count of threads I read and I still don't have an answer. Can someone guide me step by step how to flash CWM and ROM to my SGS2 (i9100)?
At the moment I have stock ROM flashed using Odin since all my tries to flash latest CWM and ROM ended in a bootloop or I didn't even manage to flash anything. If I try to flash CWM through stock Android recovery, it says "Signature verification failed". I flashed Dorimanx kernel using Odin to get the recovery but then I couldn't flash ROM because it said "E: Can't mount sd card". I tried flashing Resurrection Remix ROM.
I have no idea what to do because everytime I think something new, I run into these 2 errors. It would be great to get some help.
Ignas.
Read about philz kernel zip. This can be flashed through stock recovery and it will give you what you need . root and cwm
andrewwright said:
Read about philz kernel zip. This can be flashed through stock recovery and it will give you what you need . root and com
Click to expand...
Click to collapse
I downloaded the kernel from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9100 but I get this error: E:Error in /tmp/sideload/package.zip (Status 7). Above this, in the yellow font, it says This pacakge is for galaxys2, i9100, GT-I9100, GT-I9100M, GT-I9100P, GT-I9100T, SC-02C', devides: this is a ' '. How can I fix this?
http://forum.xda-developers.com/gal...lz-cwm6-stock-kernel-cwm6-root-exfat-t1877270
Kernel not just recovery.
I think you need to read the thread before flashing away and possible bricking you're phone.
Rooting and installing cwm is basic stuff. Bricking is common place too.
andrewwright said:
http://forum.xda-developers.com/gal...lz-cwm6-stock-kernel-cwm6-root-exfat-t1877270
Kernel not just recovery.
I think you need to read the thread before flashing away and possible bricking you're phone.
Rooting and installing cwm is basic stuff. Bricking is common place too.
Click to expand...
Click to collapse
Do you mean this http://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9100/Stock (Download doesn't work) ? I can't find any other links there for the latest version.
I'm not really scared of bricking my phone since I won't use it without flashing it correctly anyway. I have flashed it few times successfully in the past but now I can;t do this and it's really annoying. I flashed my friend's phone without any problems but I can't do that for myself.
Could someone provide me with an easy guide to rooting, installing recovery and installing a custom rom on my S2? I1900 version.
I'm wanting to put a KK rom on it but I'm confused about which recovery to use and the best method for rooting.
WastedJoker said:
Could someone provide me with an easy guide to rooting, installing recovery and installing a custom rom on my S2? I1900 version.
I'm wanting to put a KK rom on it but I'm confused about which recovery to use and the best method for rooting.
Click to expand...
Click to collapse
I read your post on another thread you said you have flashed siyah kernel, so you are already rooted. You just need to use a "kitkat compatible" recovery such as CWM 6.0.4.5+ or TWRP 2.7+ to flash kitkat roms
Just a quick google search for "kitkat compatible recovery" gave me this one. Just download the CWM .zip, flash it from siyah recovery, then reboot to recovery(not system), then do your wipes/backups and flash the rom and gapps you want and reboot to system. Done
will give this a go!