[Q] - Unlock bootloader via HTCDEV problem - HTC Flyer, EVO View 4G

Guys,
Im trying to unlock my bootloader for the flyer via the htcdev website but when I get to 'fastboot oem get_identifier_token' section I keep getting an error back.
I'm using a Mac so the command for me is './fastboot-mac oem get_identifier_token'
I get the error message '... FAILED (status malformed (1 bytes))'
IF anyone could offer any assistance that would be great

I've the same problem.
Anyone for assistance ?

You're not in fastboot mode on the device, you're in hboot mode.

With "fastboot" red highlighted (is it the fastboot mode ?) i have :
'ERROR: could not clear input pipe; result -536870163< waiting for device >'
And with "hboot usb plug" blue highlighted it's :
'... FAILED (status malformed (1 bytes))'

Related

[Q] bootloader help please

So i got my htcdev token but when i go to put in "fastboot flash unlocktoken Unlock_code.bin" in the command prompt it just sais "error: cannot load 'Unlock_code.bin': Unknown error" someone please help
htcvarona said:
So i got my htcdev token but when i go to put in "fastboot flash unlocktoken Unlock_code.bin" in the command prompt it just sais "error: cannot load 'Unlock_code.bin': Unknown error" someone please help
Click to expand...
Click to collapse
Make sure your phone is still correctly connected through USB.
You can tell when it says "FASTBOOT USB" in red text
I had the same issue at first and I just made sureI used a different USB port.
For me right now, I'm actually "stuck" after inputting the command.

[Q] AT&T One M9 identifier token error

I'm trying to unlock the bootloader of my One M9 so that I can use Sunshine and get S Off. In the end I'm trying to convert it to the dev version. I've unlocked the bootloaders of my M7 and M8 before this but for some reason it is giving me an error this time. It says "FAILED (remote: unknown command)" every time I try. I've tried with sync manager install and uninstalled. I really have no idea why this is happening. I tried to get the tokens on the M7 and M8 with the same drivers to test them and everything went as usual. Can anyone help me with this?
Thanks
Schmerg said:
I'm trying to unlock the bootloader of my One M9 so that I can use Sunshine and get S Off. In the end I'm trying to convert it to the dev version. I've unlocked the bootloaders of my M7 and M8 before this but for some reason it is giving me an error this time. It says "FAILED (remote: unknown command)" every time I try. I've tried with sync manager install and uninstalled. I really have no idea why this is happening. I tried to get the tokens on the M7 and M8 with the same drivers to test them and everything went as usual. Can anyone help me with this?
Thanks
Click to expand...
Click to collapse
I think you need to be in download mode for the fastboot commands to work.
dratsablive said:
I think you need to be in download mode for the fastboot commands to work.
Click to expand...
Click to collapse
Wow thank you so much. I didn't know I needed to be in download mode.
Much appreciated!
I found that in Download mode I couldn't get the identifier token for some reason. I had to boot into the bootloader then use "fastboot oem rebootRUU" to get into RUU mode. THEN I was able to get the identifier token, but I couldn't flash the Unlock file unless I was in Download mode. A little more convoluted then the M8
navalynt said:
I found that in Download mode I couldn't get the identifier token for some reason. I had to boot into the bootloader then use "fastboot oem rebootRUU" to get into RUU mode. THEN I was able to get the identifier token, but I couldn't flash the Unlock file unless I was in Download mode. A little more convoluted then the M8
Click to expand...
Click to collapse
How do I boot into boot loader? I'm only getting command not found in terminal every time I type in the fast boot command...
elusivepuma said:
How do I boot into boot loader? I'm only getting command not found in terminal every time I type in the fast boot command...
Click to expand...
Click to collapse
easy way is enable developer options on the phone
turn on usb debugging hook phone to PC
from command prompt on PC type adb reboot download
navalynt said:
I found that in Download mode I couldn't get the identifier token for some reason. I had to boot into the bootloader then use "fastboot oem rebootRUU" to get into RUU mode. THEN I was able to get the identifier token, but I couldn't flash the Unlock file unless I was in Download mode. A little more convoluted then the M8
Click to expand...
Click to collapse
Hello there. I am not able to get identifier token both in bootloader and download mode. I tried adb reboot bootloader first, successfully entered in bootloader. After typing fastboot oem_get_identifier_token
stuck in error FAILED (remote : unknown command)
and same as for adb reeboot download mode.
What should i do now?
I have HTC Desire 626s.
Thanks in advance
aashish981 said:
Hello there. I am not able to get identifier token both in bootloader and download mode. I tried adb reboot bootloader first, successfully entered in bootloader. After typing fastboot oem_get_identifier_token
stuck in error FAILED (remote : unknown command)
and same as for adb reeboot download mode.
What should i do now?
I have HTC Desire 626s.
Thanks in advance
Click to expand...
Click to collapse
Command is wrong. Try fastboot oem get_identifier_token
Hi guys,
im trying to unlock to the bootloader. I use the command "fastboot oem get_identifier_token" from the website "htcdev". But i get no token, there is showing following issue:
C:\Fastboot>fastboot oem get_identifier_token
...
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
OKAY [ 0.100s]
finished. total time: 0.101s
my htc one m9 please help me
<<<< Identifier Token Start >>>>
1E273FDE078CCB771DFA5E6A826083BF
2D6F6C1A962A39E4A133A5B95214CA0C
F856D703BD183517577291FAB5F6A6B4
5307F3888E6CA0C866411B1072588567
F0D67ED66548E31EA4332612B2DA089C
8A96B3918CC122D63AC944BB7E790F47
490E35E4BF24C7956207A709BF6B33C0
7DD92A84CACAF4487F4DFE44D11A4C9B
1D6366A63326C6DBE442CE57A92CA767
F7F09206F75E6E2B606759953F259B23
2C9D86AFCE30EEAE3021231698C1A624
0DCD40A03C61A8CF4D809BC1DAAB589B
D16914018ADBA0029C8CB95A8C2D6513
F49A75ABE7A574BF288E16C50C98870B
8909B333B14FC6F60F977A301919DF6A
83192A7E07B091DA044374F432BB1B82
<<<<< Identifier Token End >>>>>
send me the Unlock_code.bin for my email.
[email protected]

Having trouble with unlocking bootloader

I got error when unlocking bootloader with flashtool (0.9.20.0)
FAILED (remote: Command not allowed)
I also tried with fastboot on commant prompt and got the same error.
And created a folder with my device's serial and put ulcode in it (folder is at flashtool/custom/mydevices) and got the error bootloader cannot be unlocked offically.
Rooting status in my device's service mode says unlock bootloader allowed:yes
My device is E6803
Is there anyone to help?
Any help?
Do you have OEM unlocking on in developer options?
Yeah man, I have. And that was the problem. Thanks for your help

FASTBOOT ERROR "FAILED (remote: fastboot is lock, please run oem unlock with valid pa

FASTBOOT ERROR "FAILED (remote: fastboot is lock, please run oem unlock with valid pa
on ANY fb command i get "FAILED (remote: fastboot is lock, please run oem unlock with valid password)"
ALSO after "fastboot oem unlock" i get:
---
and just a uncloseable shell box that is unresponsive ..iv flashed this device before and same error when any get unlock var or info command any ideas my device is a moto tc700x (is an old symbol\zebra now)
i never put a password in before i flashed my device for IoT and got a freeze during install now i cannot do anything w it even reflash recovery or zips i used previously used before?
any ideas anyone?
metalman1972 said:
on ANY fb command i get "FAILED (remote: fastboot is lock, please run oem unlock with valid password)"
ALSO after "fastboot oem unlock" i get:
---
and just a uncloseable shell box that is unresponsive ..iv flashed this device before and same error when any get unlock var or info command any ideas my device is a moto tc700x (is an old symbol\zebra now)
i never put a password in before i flashed my device for IoT and got a freeze during install now i cannot do anything w it even reflash recovery or zips i used previously used before?
any ideas anyone?
Click to expand...
Click to collapse
You can use "fastboot getvar all" cmd to check whether ur boot loader is locked

I Need Help Unlocking My Bootloader On A Alcatel U5 4047X, I Keep Getting The Message FAILED (remote: 'unknown command') fastboot: error: Command fail

Hi, I Have A Alcatel U5 4047X And I Bought It In 2018. And I Am Having Problems Unlocking The Bootloader. I Turned On USB Debugging And OEM Unlock, Then I Went Into Fastboot Mode, And Plugged It Into My PC. i tried (Fastboot oem get_unlock_data) (fastboot oem unlock) (fastboot flashing unlock) but nothing works, i tried Different USB Ports, Different Cables, But I Still Get The Message FAILED (remote: 'unknown command') fastboot: error: Command failed, Can Someone Help Me?
How to Unlock Bootloader On TCT Alcatel 4047X U5 3G - TweakDroid
tweakdroid.com
joke19 said:
How to Unlock Bootloader On TCT Alcatel 4047X U5 3G - TweakDroid
tweakdroid.com
Click to expand...
Click to collapse
this doesnt help, tried everything, still get the same error. thanks for trying to help though.

Categories

Resources