I bought a used Hero that's already been rooted. I wanted to backup the ROM on there so I installed ROM Manager and it flashed my bootloader image.
Obviously now I don't have the proper recovery image, I have the ROM Manager recovery image. As far as I can tell this image doesn't allow me to do stuff like Clear Dalvik Cache, reset my apps and such.
It does allow me to install a custom ROM -- I installed VillainROM -- but it doesn't let me actually clear my data on my device. So Villain runs like laggy crap because I can't do a proper factory reset with the image. It also didn't delete any of my settings or apps.
Am I missing something or do I have to redo the root procedure to get the proper recovery image back?
scouzer said:
Am I missing something or do I have to redo the root procedure to get the proper recovery image back?
Click to expand...
Click to collapse
No no,... You should be ok to just reinstall the patched recovery.
Try following these instructions from BTDAG's [Guide] Newbie Guide to Install a Custom Rom [Updated 14/04]
Installing a recovery image:
1. On your phone, go to Settings > Applications - and make sure "Unknown Source" is ticked.
2. On your phone, go to Settings > SD card and phone storage - click Unmount SD card.
3. Then click Format SD card.
4. Plug the phone into the computer via USB, then pull down the notification bar and click on the SD card notification. Then click mount.
5. Download this APK and recovery image and save it to your computer:
http://zenthought.org/content/project/flashrec - FlashRec.apk
http://forum.xda-developers.com/showthread.php?t=561124 - Amon_Ra’s Hero Recovery Image
6. Copy them both to your SD card (do NOT put them inside any folders on the SD card, just put them on the SD card itself).
7. Unplug the phone from the computer once they are downloaded to the SD card.
8. Go to the Market and download ASTRO File Manager or any file manager program if you do not already have one.
9. Open the file manager and find the FlashRec apk file and click it and choose open app manager and then install it.
10. When it is installed click Open. Click on Backup Recovery Image and wait for it to finish. If you get "backup failed" response see the "Ib. Installing the correct HTC ROM" section for more details, if the backup is a success carry on.
11. Once done, click on the empty text box in the FlashRec program and type:
/sdcard/recovery-RA-hero-v1.6.2.img
(replace exact name as new versions come out)
Then click on the Flash Recovery Image button and wait for it to finish.
Click to expand...
Click to collapse
I successfully flashed (cm6) for the first time and got everything working correctly but I can't seem to find the Android Market. Now from what I read I need to install the gapps file. I found it downloaded it straight on the phone. Am at the clockworkmod recovery, but.....how do I install it?
install zip from sd card?
Wont that mess up the ROM
sorry im fairly new to all this.
From Clockwork choose - install zip from sdcard, then - choose zip from sdcard, then browse to where you saved the gapps file and select it. It won't mess up your ROM.
911jason said:
From Clockwork choose - install zip from sdcard, then - choose zip from sdcard, then browse to where you saved the gapps file and select it. It won't mess up your ROM.
Click to expand...
Click to collapse
Ok I did it but there was a problem.
it says
--Installing: SD CARD:download/gapps-mdpi-20101020-signed.zip
Finding update package...
Opening update package...
Installing update...
Installing Google Apps...
Installation Complete!
E:Error in /sdcard/download/gapps-mdpi-20101020-signed.zip
(Status 0)
Installation aborted.
and then it froze at that.. /:
EDIT:::::
Disregard, I rebooted and redid the process and it worked out, thanks for the help!
vicmora5 said:
I successfully flashed (cm6) for the first time and got everything working correctly but I can't seem to find the Android Market. Now from what I read I need to install the gapps file. I found it downloaded it straight on the phone. Am at the clockworkmod recovery, but.....how do I install it?
install zip from sd card?
Wont that mess up the ROM
sorry im fairly new to all this.
Click to expand...
Click to collapse
Yes you install the gapps.zip file from Clockworkmod recovery by selecting install zip from sd card. You need to install it from ClockworkMod because all of these Google Apps will be installed in the /apps directory. No this won't mess up the ROM because the structure of the zip file determines what gets written to the various partitions on the phone. The gapps.zip file contains files that will be written to the /apps directory. A ROM zip file will typically have *.img files in it like boot.img as well as files for the /apps directory.
This was a bug in rom manager with gapps. You followed the procedure correctly fyi.
BelacNongaw said:
This was a bug in rom manager with gapps. You followed the procedure correctly fyi.
Click to expand...
Click to collapse
Alright great. Yeah like I said after that weird error message all I did was restart the phone go back into clockwork and install the zip again and there was no error this time around so now I have all the Google Apps. Thanks to everyone for the help.
UPDATE: Since some of you guys are still finding this useful, I updated the CWM version to 3.0.2.8. Please note that ROM Manager is the best way to install CWM 3.0.2.8. You should only need this .zip if you need to restore the B&N boot loader.
There are a number of CWM installable .zip files being distributed that break Clockworkmod in a way that Rom Manager will not fix. This .zip file will reinstall the B&N bootloader (to enable the recovery buttons) and install ClockworkMod on your internal memory. This .zip will only help if you have installed a "flashable" .zip and can no longer get into CWM by holding N + Power on boot.
This file can be installed with IOMonster's bootable CWM to re-enable the ability to use CWM without an SD card.
How to use:
1) Create a bootable CWM SD card from the link above.
2) Mount the SD card on your computer and copy the RecoveryFix.zip file to it.
3) Boot the Nook into CWM from the SD card.
4) Choose "install zip from sdcard"
5) Choose "choose zip from sdcard"
6) Browse to the RecoveryFix.zip and select it.
7) Choose "Yes - Install RecoveryFix.zip"
CWM should now work by booting and holding the N + Power buttons.
Technical details:
The bootloader (u-boot.bin) file included with the stock image has code to look for the recovery key sequence on boot. It also contains the "Touch the Future of Reading" splash screen. Some of the update .zip releases include a custom uboot.bin (to change the splash screen) that does not look for the recovery keys...so there's no way to boot into recovery without an SD.
Currently the only automated way to put the correct files back is by using one of the stock recovery .zips. These take the entire system back to stock though. All this .zip does is replace the stock u-boot.bin file, CWM uRecRam and CWM uRecImg files on the /boot partition. This can also be easily fixed by booting any image from an SD card and copying these files manually.
is this for use with any flashable rom or only certain ones? i'm on hcv4 and want to make sure this is safe to use before flashing it.
This worked fantastic! Thank you!
byproxy said:
is this for use with any flashable rom or only certain ones? i'm on hcv4 and want to make sure this is safe to use before flashing it.
Click to expand...
Click to collapse
This is a standalone fix - its only necessary if you've flashed a rom and could no longer boot into CWM recovery afterward.
thanks again xawen!
Thanks so much for this! Great work!
Signature verification failed
Will This work with the Froyo builds?
Thanks
huemedia said:
Will This work with the Froyo builds?
Thanks
Click to expand...
Click to collapse
It should work with any build. It does not replace any of the build specific files, just the boot loader and the recovery images.
Works on phiremod (CM7). I was stressing why I couldn't reach my internal recovery, but was too lazy to do any research on the matter. Just stumbled upon this and everything is fixed again
Just what I was looking for... thanks!
omarsalmin said:
Works on phiremod (CM7). I was stressing why I couldn't reach my internal recovery, but was too lazy to do any research on the matter. Just stumbled upon this and everything is fixed again
Click to expand...
Click to collapse
what do you mean by "everything is fixed again"?
I like phiremod and all, but no internal storage is irking me and I want to go back to rooted stock and try to make a CM7 bootable SD.
Flashed this, now I'm stuck on the "Touch the Future of Reading" splash screen. Running CM7 nightly latest, dalingrin's 1100MHz Overclock.
Edit: Trying to boot, won't get past that damn splash screen. Tried reflashing cm7-encore-full-5.zip, gapps, got nothing. Going to try flashing the overclock again and see if that helps.
Edit2: No dice. I don't have a backup, either. Guess I have to flash a whole new boot.img?
This should be stickied. There are a LOT of CWR files around here right now.
oshigeru said:
Flashed this, now I'm stuck on the "Touch the Future of Reading" splash screen. Running CM7 nightly latest, dalingrin's 1100MHz Overclock.
Edit: Trying to boot, won't get past that damn splash screen. Tried reflashing cm7-encore-full-5.zip, gapps, got nothing. Going to try flashing the overclock again and see if that helps.
Edit2: No dice. I don't have a backup, either. Guess I have to flash a whole new boot.img?
Click to expand...
Click to collapse
Same thing kept happening to me. I would hold down the power button or power+n button or power+volume up + n button to get the NC to shut down. Then, I'd press the power+volume up + n button for a few seconds; this would get it to boot into CWR. From CWR I'd select reboot system. After that it would have no problem fully booting (until the problem happeend again). I did notice that after a while the startup boot took longer. After pressing the power button to power on the NC it would take several seconds before the "touch the future of reading" screen to come up, and it would take several more seconds (30 or so) for it to get past that screen.
I'm not sure what the beneft is of doing this; as long as I have a CWR bootable microSD with me (always in the NC's case) I don't need this.
xawen said:
There are a number of CWM installable .zip files being distributed that break Clockworkmod in a way that Rom Manager will not fix. This .zip file will reinstall the B&N bootloader (to enable the recovery buttons) and install ClockworkMod on your internal memory. This .zip will only help if you have installed a "flashable" .zip and can no longer get into CWM by holding N + Power on boot.
This file can be installed with IOMonster's bootable CWM to re-enable the ability to use CWM without an SD card.
How to use:
1) Create a bootable CWM SD card from the link above.
2) Mount the SD card on your computer and copy the RecoveryFix.zip file to it.
3) Boot the Nook into CWM from the SD card.
4) Choose "install zip from sdcard"
5) Choose "choose zip from sdcard"
6) Browse to the RecoveryFix.zip and select it.
7) Choose "Yes - Install RecoveryFix.zip"
CWM should now work by booting and holding the N + Power buttons.
Technical details:
The bootloader (u-boot.bin) file included with the stock image has code to look for the recovery key sequence on boot. It also contains the "Touch the Future of Reading" splash screen. Some of the update .zip releases include a custom uboot.bin (to change the splash screen) that does not look for the recovery keys...so there's no way to boot into recovery without an SD.
Currently the only automated way to put the correct files back is by using one of the stock recovery .zips. These take the entire system back to stock though. All this .zip does is replace the stock u-boot.bin file, CWM uRecRam and CWM uRecImg files on the /boot partition. This can also be easily fixed by booting any image from an SD card and copying these files manually.
Click to expand...
Click to collapse
This fixed my nook. Thanks!!!!!
Works - after a few tries!
Really appreciate the work. Thanks!
While I keep my boot disk with me, I am very happy to have the ability to power+N into CWR.
Great work, thanks m8s!
xawen said:
All this .zip does is replace the stock u-boot.bin file, CWM uRecRam and CWM uRecImg files on the /boot partition.
Click to expand...
Click to collapse
Can you be more specific about exactly which u-boot.bin, uRecRam and uRecImg files are included - including source and version ?
ADude said:
Can you be more specific about exactly which u-boot.bin, uRecRam and uRecImg files are included - including source and version ?
Click to expand...
Click to collapse
This .zip has the stock (B&N) u-boot.bin and the uRecRam and uRecImg for CWM 3.0.0.5. It was built a while ago to fix an issue with specific CMW installable Froyo .zip files that were being distributed. I haven't seen any CM7 images with this problem, but if anyone still has a need for this I can update to a current CWM version and post tonight.
xawen said:
This .zip has the stock (B&N) u-boot.bin and the uRecRam and uRecImg for CWM 3.0.0.5. It was built a while ago to fix an issue with specific CMW installable Froyo .zip files that were being distributed. I haven't seen any CM7 images with this problem, but if anyone still has a need for this I can update to a current CWM version and post tonight.
Click to expand...
Click to collapse
Aha - I looked more closely and saw that it is an old thread that was brought to the surface by a "thanks" comment.
question
So I flash this fix and can get into CWM 3.0.0.5, then I flash the official CWM 3.0.1.0 and can no longer get into recovery. I also tried the manual procedure using adb. Still no dice.
What am I doing wrong?
i have re flashed my phone a while ago. it went well. from 2.3.5 to eclair 2.1. i reflashed due to wifi error, however, eclair installed, rooted the the phone, i plan to reflash it with a custom rom, Bionix 1.3.1 or Project V. im using the AIO toolbar, i tried it first with the Bionix, reinstalll packages 4 times. and i get an error. also with the Project V rom. same thing. error as well. the error says:
cannot locate /sdcard/update.zip
does this mean that my phone is not yet rooted? i have super user though.
Mostly likely you do not have the CWR Update.zip on your SDcard.
Go here and download Option B and put it on your SDcard. Reinstall twice and then flash your ROM
i already copy and pasted the file in /sdcard however it is still not working? shall i got into CWR? to make it work?
Put the CWR zip from my earlier post on your sdcard (not in a folder-just plain on card by itself). Might have to rename it Update.zip, but not sure about that one.
Boot into recovery (Blue) hit Reinstall Packages.
Will reboot back into recovery (Blue) and hit Reinstall packages again, will boot into CWR (Green).
From there, find Install zip from SD card and hit it. Now you can find you ROM and highlight it and install.
I am almost done rooting my HTC One. I am able to boot into recovery and get into TWRP but when i go to install it goes directly to SD (which I don't have). I have looked through all of the folders to find the .zip file that I need to install SU but it is not there. I have downloaded it directly to the phone as well as added it from "file transfer." File transfer that there are 3 zip files on the phones internal memory but nothing shows up in Team Win. Help?
Also when I reboot from Team Win, I get a message that tells me I am not rooted, and asks if I want to install SU.....I am afraid ill brick the phone if I swipe to install with no zip selected.
figured it out
ghost19d said:
I am almost done rooting my HTC One. I am able to boot into recovery and get into TWRP but when i go to install it goes directly to SD (which I don't have). I have looked through all of the folders to find the .zip file that I need to install SU but it is not there. I have downloaded it directly to the phone as well as added it from "file transfer." File transfer that there are 3 zip files on the phones internal memory but nothing shows up in Team Win. Help?
Also when I reboot from Team Win, I get a message that tells me I am not rooted, and asks if I want to install SU.....I am afraid ill brick the phone if I swipe to install with no zip selected.
Click to expand...
Click to collapse
I had installed the wrong package for TWRP. Got it changed over and it works fine now!