If you check the images I attached,you'll see that under Settings>About Phone,nothing shows up at the kernel version. All it says is 2.6.35.7. Shouldn't it also say GTI9000 along with the kernel version? Where do I find that out from?
Plus I dialled *#1234# and uploaded a pic of that too. Is my kernel is KH5 or KH8?
I bought the phone only 2 days ago and want to root it now. I'm not that much of an expert as this is just my first Android phone.
Can I use any insecure kernel for flashing it? Is that safe?
it should be same as your firmware since you are still on stock rom. Anyway, flashing to any insecure kernel which is on KH* family should be fine.
You can directly move to KJ2 firmware as its the best rite now for I9100G models.Then root it using the CF-Root Method
Link :http://forum.xda-developers.com/showthread.php?t=1075278
or Install a custom ROM for I9100G
Link : http://forum.xda-developers.com/showthread.php?t=1341288
Related
Okay guys, First off I apologize if my post is too noobish. Yes I am a noob at all this.
I rooted my phone using steps mentioned here - http://samsunggalaxys2review.org/forum/showthread.php?tid=43
I bought my phone in india with the KE8 update, and now the About Phone section shows the following:
Android Version - 2.3.3
Bsaeband Version - I9100DDKE2
Kernel Version: 2.6.35.7-I9100XWKDD-CL 161513
Build Number: GINGERBREAD.XWKE8.
I read about a post for rooting the galaxy S2 here - http://forum.xda-developers.com/showthread.php?t=1101671
and am a little bit confused. Firstly did I do the rooting with a piece of old software or something? Do I need to do the rooting again or flash my phone with some other latest software ?
Can someone please spoon feed me some info about:
1. Whether I need to infact update my software and flash my phone again
2. If so how?
Thanks a lot guys, and again sorry for being too noobish :S
flash CF-root KE8 kernal as per
http://forum.xda-developers.com/showthread.php?t=1103399
that way you can keep your KE8 and have Root AFAIK
(take no responsibility blah blah blah)
http://forum.xda-developers.com/showthread.php?t=1101671
I found this thread here and here they have given source of the Stock KE8 Kernel. Since i have already rooted my phone, is it enough if I just flash my phone with this stock kernel to have the latest software in my phone?
vijayallenraj said:
http://forum.xda-developers.com/showthread.php?t=1101671
I found this thread here and here they have given source of the Stock KE8 Kernel. Since i have already rooted my phone, is it enough if I just flash my phone with this stock kernel to have the latest software in my phone?
Click to expand...
Click to collapse
yes just download the stock kernel KE8 and flash over the rooted one, and your phone will still be rooted
Well I have rooted mine yesterday after a 3 hours effort. I think there should be a thread for Noobs like OP and me which will elaborate the Steps & Methods, the Application needed etc. in a Simple way with good demonstration. Not everybody had Android before, so for the new comers this is hard, very hard to understand all these. Like I am now having difficulties with ADB, I don't even know where to install it and from where, how to use it? The devs are very easy with these stuffs and they just mention the software name, but we, newcomers to Android are getting puzzled. It's a like a 5 year old baby has to face class X straightaway.
Some basic faqs SGS1 mostly same SGS2 .
http://forum.xda-developers.com/showthread.php?t=723596
http://forum.xda-developers.com/showthread.php?t=939752
http://forum.xda-developers.com/showthread.php?t=819551
jje
Thanks mate. Just 1 more question:
Firmware info
PDA:XWKE8
PHONE: DDKE2
CSC:ODDKE2
Build date: 18/05/2011
Generic India (ODD): www(dot)multiupload(dot)com/6OZ2KOHB07
XWKE8 Stock Kernel: www(dot)multiupload(dot)com/ZTRYIQ5S35
There was another thread where I found this. Which here should I use? What is ODD Generic India and what is the difference between this and the Stock Kernel?
And btw here is a guy that explains everything in detail on youtube:
I followed his instructions, and did exactly what he did and rooted my phone in 10 mins
www(dot)youtube(dot)com/user/mattj101101#p/u/9/XNggrd0Ptyg
Please help my new s2 a is showing kernel version:[email protected]#2 guys is this rooted handset?
vinaymonu25 said:
Please help my new s2 a is showing kernel version:[email protected]#2 guys is this rooted handset?
Click to expand...
Click to collapse
This is the stock kernel which came from the Samsung factory. The phone is NOT rooted if you did not root it. You can do rooting with an insecure kernel and then revert back to the stock kernel, keeping the root intact.
Hi,
I am sorry for the newbie question.
I just bought a Galaxy S2 GT-9100G here in China.
Only after buying did I realise it is a 'G' model. damn.
anyway - I would like to 'reformat' the device, and place an Israeli ROM on it.
I hope I am using the correct terms.
The reason for this - is that the chinese version comes without Android Market,
and other stuff (and the Israeli one does).
1. Do I need to root the device first before I can change the ROM ?
2. If so - I have seen in this link
http://forum.xda-developers.com/showthread.php?p=18099806
that flashing the kernel is the only way to root the device.
I have flashed my brother's Galaxy S2 (I9100) a month ago, using the steps shown here:
http://samsunggalaxys2review.org/root-your-samsung-galaxy-s2-heres-how/
(used OdinDownloader and SuperOneClick). Do I do the same with this device ?
Which file do I supply to Odin ??
3. Is there anyway to flash the Israeli ROM on this device ?
or it won't work, cause Israeli ROM is only for I9100 and my device is I9100G ?
If not - what can I do in order to flash a new ROM with built-in Android Market ?
Thanks to everyone who can help !!!
If u flash the new rom to your phone, it no need to root!
I own a I9100T, I flash it to I9100, it work fine, so I think u can flash it to an Israeli ROM.
Check this thread: http://forum.xda-developers.com/showthread.php?t=1192575
In general, be careful about flashing the China phones. It seems they went out of their way to make sure those phones comply with China's government restrictions.
i9100G got KH4 and KI1 rom, u need to donload insecure kernel to root them
claimui said:
Check this thread: http://forum.xda-developers.com/showthread.php?t=1192575
In general, be careful about flashing the China phones. It seems they went out of their way to make sure those phones comply with China's government restrictions.
Click to expand...
Click to collapse
they just have different bootloader,once you have a cmw recovery , you can easlie flash any rom you like,that is what i heard,and i9100g use different cpu
hahaboy said:
i9100G got KH4 and KI1 rom, u need to donload insecure kernel to root them
Click to expand...
Click to collapse
Thanks hahaboy.
Where can I get the KH4 and KI1 insecure kernels ?
How do I root ?
Just use Odin or do I need SuperOneClick also ?
ghmail2 said:
they just have different bootloader,once you have a cmw recovery , you can easlie flash any rom you like,that is what i heard,and i9100g use different cpu
Click to expand...
Click to collapse
So, ghmail, are you saying you have managed to do so yourself ?
Change the ROM on an I9100G to any ROM you want ?
On the topic - how can I backup everything on my device ?
I mean - the bootloader, the ROM and all the other stuff I might mess up if I brick my phone ...
Please remember..u cant flash any I9100 custom rom because its diff between I9100 and I9100G..If u flash it the phone will be semi bricked and u need to flash back to the ori rom of I9100G KH4 or KI1..
China GT-19100G-ZCLC2
Hi People, I am a total novice here. I have been reading your forms for few weeks now, since i Bought this SGS II-I9100G in China [Big Mistake ?? :-( ]
This is my phone :
Model - GT-19100G
Android - V 2.3.6
Baseband - 19100GZCLC2
Kernel - 2.6.35.7 [email protected] #2
Firmware : PDA:LC2 / Phone:LC2 / CSC:LC2 (CHN)
I read thro creezalird pdf user guide and as guessed DooMLoRD_v4_ROOT' dint work with both methods on my phone.
I just want to root the phone so I can install few useful apps, no fancy stuff like flasing or custom rom etc. As you know even google play is blocked. Can someone point me to right link/guide me to do it.
I did read many articles (too many of your forum's) and probably why Im now totally confused. Reason is I do not see anything pointing to ZCLC2. Maybe I am not looking hard enough.
I got it done using superatom's kernel. Now all sw works on chinese phone.
Sent from my rooted GT-I9100G using xda premium
Hey everyone,
so i've rooted my phone once before, and after some time i decided it was time to install chainfire's rom due to my battery drainage.
so i went on over to chainfire's thread and read... and read.... and read... downloaded all the jizz. and eventually i got down to the odin part. it was hanging at a specific step. anyways i read... again and realised that my firmware supported a very old recovery tool that didnt work so great. so i got back down to the site and read some more, and eventually got down to installing a new firmware (still confused with firmware vs kernel... but anyway)...
i went down to sammobile. and voila got a 4.0.3 firmware nice! but then... root was gone, and like my rooted apps that installed requested it needs to be rooted first. so i was like (EFFFFFF) anyway.
so i began searching again on how to root, and yes i know i need an insecure kernel... but where on earth do i find this thing.
i noticed that on sammobile they have kernels (or is it firmware, jeez all these names )... and i noticed that some of them have hash signs (##) next to them, does that mean it's insecure? i read somewhere that the star (*) sign means incomplete (it's an update rather)...
so please, someone, anyone, please help...
all i wanna do is install chainfire's rom
DEVICE: Samsung Galaxy S II
MODEL: GT-I9100
ANDROID VERSION: 4.0.3
BASEBAND VERSION: I9100DXLP7
KERNEL VERSION: [email protected] #3
BUILD NUMBER: IML74.DXLP7
thanks in advance guys...
Just download and flash via odin the cf root kernel for LPQ which is compatible with LP7 (use the latest version 5.4 referred to as proper it is a bug fix version). This will give you root and cwm.
Sent from my GT-I9100 using Tapatalk
Pending
Thanks so much, ima get on it a lil later today and post back results.
You're a star.
Original (samsung) DXLP7
marcadam said:
Just download and flash via odin the cf root kernel for LPQ which is compatible with LP7 (use the latest version 5.4 referred to as proper it is a bug fix version). This will give you root and cwm.
Click to expand...
Click to collapse
Hi, this kinda what I'm looking for, so would you or any other kind soul explain or provide some links so that I can root my I9100 with ORIGINAL DXLP7.
Thanks.
Edit (extra info):
DEVICE: Samsung Galaxy S II
MODEL: GT-I9100
ANDROID VERSION: 4.0.3
BASEBAND VERSION: I9100DXLP7
KERNEL VERSION: [email protected] #3
BUILD NUMBER: IML74K.DXLP7
Downloaded the official DXLP7 firmwire from intratech's thread.
SUCCESS!
Worked Perfectly! WOW! Took less than 5 minutes aswell...
Thanks so much ChainFire!
But MOST of ALL, thanks marcadam for your quick response and help!
Root lives on.
P.S.
Sadly i coudln't post the external links for the CF-Root, HOWEVER go on to Google Plus and search "ChainFire". All his links are in his posts.
[Solved]
I was a complete noob but for the past 2 days I've been massively experimenting with my phone to finally figure out how to use Heimdall (since I'm on a Mac) and flashing ROMs and Kernels.
My problem is I got this phone here in India, and yesterday I flashed it with the official ICS 4.0.3 version (since KIES wouldn't let me). But then I say the Resurrection Remix ROM and I really wanted it.
So here are the doubts:
1. I realize I'll need to root my phone first. I read this in a bunch of threads. I started using Chainfire's post as my reference, only to realize that they're meant for 19100 only. Not the G variant.
So, what kernels can I use to root my phone?
My current kernel string reads like this:
3.0.8 [email protected] #2 SMP PREEMPT Tue May 22 15:00:05 KST 2012
The baseband version reads: I9100GDDLP5
I assumed LP5 to be the kernels I should be looking for (referring to Chainfire's post) but couldnt find any for the G.
I came across this link:
androidforums.com/galaxy-s2-international-all-things-root/482437-galaxy-s2-gt-i9100g-all-things-root.htm
It gives a bunch of kernels for G, but for android version 2.3.6. Does this mean:
a) Those are the only kernels I can hope to get?
b) I need to flash the old version ROM to use them?
My other question is, once I do root my phone with the appropriate kernel,
can the G variant use the Resurrection ROM? If I can't, could anyone suggest a good ROM I should use?
And finally, staying true to my newbie level, can I directly flash a custom ROM using Heimdall without rooting? Also I saw a ROM with a Siyah kernel, so can't I just flash that ROM using Heimdall? I mean, if I root with some kernel and then the ROM I install changes it anyway, can't I directly use the ROM's kernel? I'm just asking.
PDA: I9100GXXLPQ
PHONE: I9100GDDLP5
CSC: I9100GODDLP7
Solution:
I went to the Cynagenmod 9 for I9100G on this site. Went to it's FAQs, flashed the clockworkmod kernel and then used Recovery mode to flash Cyanogenmod 9. Works perfectly. Better than perfect. My phone is finally living up to it's potential!
odin
you can flash a custom recovery to your galaxy with odin,check soem guide on xda, then from the recovery menu yu can flash teh resurection rom,that is prerooted
Thanks...but
@meccandroid: Thanks for the reply, but you're saying that the ROM can be installed on the G variant too? I read there's some hardware difference in 19100 and 19100G, so if the ROM is intended for 19100, wouldn't there be an issue?
Problem solved
Problem solved...solution posted in original post.
Hello,
I rooted my phone easily because i found a CF-Root with the same version kernel. But my friends phone kernel dont match with any CF-Root kernel. His phones PDA version is XWKEB (not KE8 its KEB), its phone version XXKE6. I found CF-Root for only XW_XEU_KE2 / XW_XEU_KE7 / XW_ODD_KE8 versions. Which one can I use for root. He wants a backup before changing for custom ROM, doesnt want to force another ROM with Odin to root it!
Please help me!
Thanks in advance!
berkob said:
Hello,
I rooted my phone easily because i found a CF-Root with the same version kernel. But my friends phone kernel dont match with any CF-Root kernel. His phones PDA version is XWKEB (not KE8 its KEB), its phone version XXKE6. I found CF-Root for only XW_XEU_KE2 / XW_XEU_KE7 / XW_ODD_KE8 versions. Which one can I use for root. He wants a backup before changing for custom ROM, doesnt want to force another ROM with Odin to root it!
Please help me!
Thanks in advance!
Click to expand...
Click to collapse
Just read the section titled "Help! Which file do I use ?" from the CF-Root thread carefully and you should find a matching kernel.