I have read through all the previous posts, and still can't sideload any apps. The apk downloads into "My Files>Downloads", but when I try to open them the NT says the file is not in an acceptable format. I even followed the phone trick - downloaded to my smartphone and snatched the .apk file in backups through astro file manager. Man oh man, nothing will work! Can anyone help?
did you check the box to install from unkown sources (or whatever it's called)
I would factory reset and try again... did you ever root it or stock?
Did you download and install Go Launcher first?
I am not rooted. To factory reset, do I Erase and Deactivate straight from the nook? I'm thinking back to my old RCA Reb 100 days - and at one point, you couldn't re-register the darn things. I remember reading on this forum a one-step process to return to stock. Maybe I should find that thread again.
Are you trying to open it via the notification bar (arrows in the bottom left corner) or via the Library file browser? It only works via the notification bar for me.
jekkyll said:
I am not rooted. To factory reset, do I Erase and Deactivate straight from the nook? I'm thinking back to my old RCA Reb 100 days - and at one point, you couldn't re-register the darn things. I remember reading on this forum a one-step process to return to stock. Maybe I should find that thread again.
Click to expand...
Click to collapse
Sent from my BNTV250 using Tapatalk
You need to download "Appmenu", enable unknown apk source installations and then you will be able to side load. Fyi that apk is on this forum.
I've tried opening it both ways. I've also emailed myself an apk file and tried to open the attachment, but the attachment comes through with an unknown file type. And then NT says it's not in an acceptable format. grrrrrrrrrrrr.-
So when you use the nooks default browser to download an .apk....you click at the bottom to run it and the settings menu doesnt load??
Sent from my BNTV250 using Tapatalk
Thank you, thank you. The factory reset worked and I'm on my way! You guys are SO cool!
jekkyll said:
Thank you, thank you. The factory reset worked and I'm on my way! You guys are SO cool!
Click to expand...
Click to collapse
The problem was that you used the wrong app installer the first time you tried to sideload. This forever makes the nook unable to sideload apps. after this happens you must factory restore and only use the bottom app launcher.
Related
greetings, nookies
i just threw together this app for the NookColor. it gives you access to hidden system settings, and allows you to select soft keyboards that are installed.
it's super basic and ugly right now, but i hope it will come in handy. i plan to expand and refine it as time goes on.
when you click the All Settings button, you'll see a list of all the available preference panels. note that some of them don't work. not sure why.
some highlights:
- Development > Auto Mount - turn off usb auto mount
- Development > Manage Applications - uninstall apps, clear defaults
- Battery Use
- SD Card and Phone Storage - shows available space in internal storage
- Testing > Battery Info - status, voltage, temp, etc
- Testing > Battery History
- Testing > Usage statistics
if you find yourself on a screen without a back button, remember that you can swipe left over the notification bar at the bottom, if it's showing.
for info on installing other keyboards, see this thread. basically, you need to copy your keyboard's apk to /system/app and reboot. if you haven't done this before, here's a howto.
new! to enable the non-market apps checkbox, you need to copy this apk to /system/app. if you have 0.1 installed, uninstall it first, then copy 0.2 to /system/app and reboot. this is necessary for the app to have the right permissions to modify secure system settings. the app will still work if you install it the normal way, but you won't be able to use the non-market apps checkbox.
as usual, i accept no responsibility if this messes up your device. use at your own risk.
changelog:
0.2 - added install non-market apps option. apk must be in /system/app to enable this feature. filtered some unusable settings screens out. added some descriptions for the buttons.
Ben74 said:
greetings, nookies
i just threw together this app for the NookColor. it gives you access to hidden system settings, and allows you to select soft keyboards that are installed.
it's super basic and ugly right now, but i hope it will come in handy. i plan to expand and refine it as time goes on.
when you click the All Settings button, you'll see a list of all the available preference panels. note that some of them don't work. not sure why.
for info on installing other keyboards, see this thread.
as usual, i accept no responsibility if this messes up your device. use at your own risk.
Click to expand...
Click to collapse
I prefer to be reffered to as Nooker thanks, lol
Nice, I'll give'r a try..
-CC
EDIT: OOh nice, development settings access, usb debug mode, usb auto mounting galore..
Thanks!
Hey, thanks a bunch
keep up the good work!
Thank you very much! Unfortunately it didn't help my keyboard problem because the only keyboard that showed up was "To enable it (the Scandinavian keyboard) go to Settings - Language & keyboard. There you need to check Scandinavian keyboard if it's not checked". So I'm guessin that it's not checked and that the specific settings file (I guess it's like a control panel app in Windows) isn't even there on a Nook. Or is it just not activated that easily?
If I try to launch the keyboard i get "Activity not found". Any idea if there is another setting to activate the keyboard for use?
Very nice work.
Mastiff said:
Thank you very much! Unfortunately it didn't help my keyboard problem because the only keyboard that showed up was "To enable it (the Scandinavian keyboard) go to Settings - Language & keyboard. There you need to check Scandinavian keyboard if it's not checked". So I'm guessin that it's not checked and that the specific settings file (I guess it's like a control panel app in Windows) isn't even there on a Nook. Or is it just not activated that easily?
If I try to launch the keyboard i get "Activity not found". Any idea if there is another setting to activate the keyboard for use?
Click to expand...
Click to collapse
see this thread. you have to copy your keyboard apk to /system/app and reboot for it to show up as an option.
Thanks! I actually tried something like that, but couldn't get it copied because of the settings. Gonna try again tomorrow (getting late her in Norway).
new version. read the OP for important instructions.
Very nice... is it possible to release the source for this?
This looks great! Thanks for sharing!
gormly said:
Very nice... is it possible to release the source for this?
Click to expand...
Click to collapse
yeah, i'm willing to release the source. when i have time on monday, i'll throw it up on google code.
hold off on installing this app by copying it to /system/app. it seems this might cause your NC to do a factory reset when using any of the bn apps like the library. more info to come when i get a chance to investigate. until then, you can install 0.2 as a normal app.
Ben74, this app is excellent!
Also, I noticed that when NC freaks out and wipes to factory settings, it does not wipe /system. Does this mean that, in principle, your app will allow to keep root (with the Development menu settings)?
Thanks again!
feisty_noodle said:
Ben74, this app is excellent!
Also, I noticed that when NC freaks out and wipes to factory settings, it does not wipe /system. Does this mean that, in principle, your app will allow to keep root (with the Development menu settings)?
Thanks again!
Click to expand...
Click to collapse
are you saying that you also got a factory reset after installing NookColor Tools to /system/app? after the reset, did you still have root? i did a full reflash of /system and /data after that happened to me, so i don't know.
Ben74 said:
are you saying that you also got a factory reset after installing NookColor Tools to /system/app? after the reset, did you still have root? i did a full reflash of /system and /data after that happened to me, so i don't know.
Click to expand...
Click to collapse
No, I am not saying that at all.
I am saying that in my unrelated tinkering, I have had wipes that always end up keeping the /system intact. (I suppose they were not of the full-reset-"factory.zip" variety.)
I was simply guessing that if that were the case and your apk survived the "soft" wipe (as I have seen with other apks), then following the ordeal, the NC would still be rooted ... Maybe ...
That would be a cool possibility, no? Not having to go through the initial rooting procedure.
Ben74 said:
hold off on installing this app by copying it to /system/app. it seems this might cause your NC to do a factory reset when using any of the bn apps like the library. more info to come when i get a chance to investigate. until then, you can install 0.2 as a normal app.
Click to expand...
Click to collapse
Aha, after reading this post, I understand the context of your question better.
Here is my case: I had done a bunch of work and had NookColor Tools installed as a regular app. After performing some action that involved invoking the NC Home app, I got a message that the Nook encountered some error and will now undergo a factory reset. After the reset, I had to reroot, of course.
The bottomline, in my case, with respect to this discussion, is that the wipe-causing problem occurred while NookColor Tools was not in /system/app folder.
At the moment, I reinstalled everything and this time I put NookColor Tools in /system/app.
Will keep an eye out for interesting developments ...
I see. The factory reset that happened on my NC was the type that only wipes /data. I'm not sure if root would be retained or not. I'm also not certain that the reset I got was related to my app. Has anyone else who installed it to /system/app experienced a reset?
Sent from my NookColor using the XDA app
Ok, thanks for the info. So it seems possible that the reset was due to something else. Has anyone else experienced a reset?
Sent from my NookColor using the XDA app
I've experienced one of these, but before I'd ever installed your app. It was right after I had tried to install the Market/Gmail fix as described by Mister Muffin. Something about an authentication problem, and then, we're going to reset ... no yes/no option, just went ahead and did it.
ok, it looks like the reset i had was probably caused by something else. i have installed NookColor Tools to my /system/app, and haven't gotten another reset so far. please let me know if anyone has any problems when installing NookColor Tools to /system/app.
I hope this helps everyone! I followed the directions for Auto-Nooter particularly the part where it tells you to De-Register your device with B&N. After auto-nootering there did not seem to be a way to relaunch the app that allows you to sync with B&N. Here is how I get re-registered:
Open NookColor Tools
Tap All Settings
Find the options listed "Wireless"
There is 3 options for Wireless, choose the second one in the list.
This will open up the Barnes and Noble starting wizard.
Press Continue with setup, and it will ask you to login to B&N or Create a new account.
Main Target said:
I hope this helps everyone! I followed the directions for Auto-Nooter particularly the part where it tells you to De-Register your device with B&N. After auto-nootering there did not seem to be a way to relaunch the app that allows you to sync with B&N. Here is how I get re-registered:
Open NookColor Tools
Tap All Settings
Find the options listed "Wireless"
There is 3 options for Wireless, choose the second one in the list.
This will open up the Barnes and Noble starting wizard.
Press Continue with setup, and it will ask you to login to B&N or Create a new account.
Click to expand...
Click to collapse
I stumbled upon this today too, can vouch that it does work.
Does anyone know why there are multiple "Wireless" entries listed after autonootering in the NookColor Tools?? BTW, there are multiples of some others too.....Thks
If you try each one, they open up different wifi settings menus, one for the quick access from the notification bar, one for the actually settings menu wifi access, and one for the wizard at the beginning.
Does this fix the auto restore that keeps happening ?
If you reregister the device, will it prevent the nook color from auto restoring the software as it randomly seems to do ?
nmhusa said:
If you reregister the device, will it prevent the nook color from auto restoring the software as it randomly seems to do ?
Click to expand...
Click to collapse
????? Care to elaborate? I dont have this problem.
After rooting my nook, I've registered it to my B&N account like normal, but none of my past purchases show up. It just shows 2 books, the 2 nook manuals. Do I need to refresh the list or something?
Congratulations self, you're blind. Just noticed the refresh icon on the Library screen.
Main Target said:
I followed the directions for Auto-Nooter particularly the part where it tells you to De-Register your device with B&N.
Click to expand...
Click to collapse
I'm a little confused, I do not see any mention of de-registering my nook in the auto-nooter instructions.
How to Use:
Before you begin:
* To update to 1.0.1 you must do a complete wipe.
* You must update to 1.0.1 to use AutoNooter 2.12.25 Instructions Here.
1 You must already have a registered NOOKcolor
2 You must have a Gmail/Youtube linked Account. IF you used a Gmail account for B&N Registration you should use that one for this process.
3 You must either have dd (Linux) or WinImage (Windows) software.
4 You must have an external microSDCard reader or this will not work. Do NOT use the NC.
5 You must have enough intelligence to follow instructions.
Let's get started:
1 Download Auto-Nooter from here: auto-nooter-2-12-25.img.zip
2 Linux: Unzip and use dd if=auto-nooter-2-12-25.img of=/dev/sdcard
2 Windows: Unzip and use WinImage to "Restore Virtual Hard Disk Image" to your SDcard.
2 Windows Alternative: https://launchpad.net/win32-image-writer/+download
3 Unplug your NOOKcolor from computer. (If Plugged in.)
4 Insert AutoNooter SDcard into your NOOKcolor.
5 Plug the USB cable into your computer and your NOOKcolor. (This will boot up the NOOKcolor.)
6 Your NookColor will reboot when it's done.
That was the hard part, now to the simple stuff.
7 Upon boot unlock your screen.
8 At the Android Welcome Screen skip Sign In.
9 Enable Location Services when given the option.
10 Connect to Wifi and launch Youtube from "Extras".
11 Click the Menu button (The one RIGHT of the Up Arrow).
12 Select "My Channel" and Login using your Gmail Account.
13 Exit Youtube and Launch Gmail from "Extras".
14 Sync your Gmail Account and Exit. (If it fails to sync that is fine.)
15 Open up Market and Accept Terms and Service.
If you made it this far your nook should be successfully Rooted. Go Download an App to make sure.
16 Enable Non-Market Installs by running the NookColor Tools App.
17 If your Youtube fails to launch Uninstall and Reinstall Youtube from /data/app
18 Go to Settings > Device Info > SdCard > UnMount > Format
Complete Wipe:
1 8 Failed Boots > Wipes /system
2 Factory Reset > Wipes /data
You must do both of these to completely wipe clean your NOOKcolor.
Click to expand...
Click to collapse
From this thread.
Are you referring to a different set of instructions?
thanks!
idburns said:
I'm a little confused, I do not see any mention of de-registering my nook in the auto-nooter instructions.
From this thread.
Are you referring to a different set of instructions?
thanks!
Click to expand...
Click to collapse
Quick question. I have a NC autorooted and its working great. I'd like to give to my GF so I need to remove my gmail/BN account information and setup one for her. Do I need to de-register with B&N and wipe the NC to be able to reregister it with her gmail/youtube/BN account info?
Thanks.
suzook said:
????? Care to elaborate? I dont have this problem.
Click to expand...
Click to collapse
I have this problem as well. Almost immediately after updating and booting into the pre-rooted 1.1 V2, the Nook reboots and loads the regular 1.0.1 software. None of my previously installed apps show up, but I still have Market (non-working), Rom Manager, and Root. Luckily, I made a recent backup and can get my stuff back, but it's on the 1.0.1 software. I still haven't figured out how to keep 1.1 V2 installed, and I'm not sure if my 950MHz UV/OC kernal 'stuck' either. Someone suggested 'Freezing' Device Manager in Rom Manager, so I'm going to give that a shot.
craigeryjohn said:
I have this problem as well. Almost immediately after updating and booting into the pre-rooted 1.1 V2, the Nook reboots and loads the regular 1.0.1 software. None of my previously installed apps show up, but I still have Market (non-working), Rom Manager, and Root. Luckily, I made a recent backup and can get my stuff back, but it's on the 1.0.1 software. I still haven't figured out how to keep 1.1 V2 installed, and I'm not sure if my 950MHz UV/OC kernal 'stuck' either. Someone suggested 'Freezing' Device Manager in Rom Manager, so I'm going to give that a shot.
Click to expand...
Click to collapse
I have the same problem. Its SO annoying. Constantly back and forth with the resets. I was the one who suggested "freezing" device manager but this is not an acceptable solution. I want to be able to use the B&N store also =/
I've actually decided to give up on this update for now. I'm staying on the 1.0.1 rooted software. Every time I upgrade to 1.1v2 it auto defaults to an older version. "Freezing" device manager did not help.
[UPDATE] So I gave it one more shot. This time I removed all the permissions of any file in system/app that seemed B&N related. Rebooted. Then I used Rom Manager to update to 1.1V2. So far no issues, and I can use the Library feature. I'm still afraid to click the "lend book" and I think I will completely remove it as soon as I figure out how (there doesn't seem to be a matching apk in system/app).
craigeryjohn said:
I've actually decided to give up on this update for now. I'm staying on the 1.0.1 rooted software. Every time I upgrade to 1.1v2 it auto defaults to an older version. "Freezing" device manager did not help.
[UPDATE] So I gave it one more shot. This time I removed all the permissions of any file in system/app that seemed B&N related. Rebooted. Then I used Rom Manager to update to 1.1V2. So far no issues, and I can use the Library feature. I'm still afraid to click the "lend book" and I think I will completely remove it as soon as I figure out how (there doesn't seem to be a matching apk in system/app).
Click to expand...
Click to collapse
How did this work out for you? Did you try the Shop button?
Everything works that i need. The Shop icon says application not installed but i can use the library, reader, and accidentally hit the lend book feature without the dreaded reboot.
Sent from my LogicPD Zoom2 using Tapatalk
FYI, I found out the random resets are caused by Titanium Backup. When you restore system settings with it, I think the AndroidID gets changed and then it resets. I restored from stock, installed Titanium Backup, restored ONLY the apps NOT data and I'm set.
I can goto the shop or use Lend Me with no issues.
swordfury said:
Quick question. I have a NC autorooted and its working great. I'd like to give to my GF so I need to remove my gmail/BN account information and setup one for her. Do I need to de-register with B&N and wipe the NC to be able to reregister it with her gmail/youtube/BN account info?
Thanks.
Click to expand...
Click to collapse
I have the same question - this ever get answered? (I couldn't come up w/ the right search string :/
spyz88 said:
FYI, I found out the random resets are caused by Titanium Backup. When you restore system settings with it, I think the AndroidID gets changed and then it resets. I restored from stock, installed Titanium Backup, restored ONLY the apps NOT data and I'm set.
I can goto the shop or use Lend Me with no issues.
Click to expand...
Click to collapse
Somehow I do not think this is the issue... Since this is happening to me and I do not even have Titanium Backup. Everytime I turn on Wifi it reregisters my Nook... So frustrating.
I am thinking of purchasing a used NC @ v1.1
Do I simply create or new B&N account? Or is there a de-register -> re-register process? Or is this something that the seller needs to do?
TIA
i deleted my facebook app from my tablet yesterday and now i cannot find it in the market, i downloaded a FB apk from this forum but it gives me a log in error. is there a way to get my archos tablet back to the orginal setting i tried reformatting , reset android all and i still cant get it to work..
i did the market hack about 50 times already too. i have SDE installed too i was on uruk droid at one point and i went back to the archos firmware.
anyone?
I used Titanium Backup on my phone to back up the apk and then used dropbox to get it to my Archos.
i can download it using app lib but when i log in it gives me an error
i wish there was a way to wipe everything off like everything just have a blank slate and then re install android. like i want it to be like the first time i turned the darn thing on
Here is the APK for 1.6.1. Its not the latest but it works
http://www.freewarelovers.com/android/download/temp/1311033049_com.facebook.katana.apk
markppc6700 said:
i can download it using app lib but when i log in it gives me an error
i wish there was a way to wipe everything off like everything just have a blank slate and then re install android. like i want it to be like the first time i turned the darn thing on
Click to expand...
Click to collapse
Mark, there is a way to wipe and start over.
Go to settings/repair and formatting...you can reset android which will just kind of reset everything back to new but won't delete anything. Or you can do a "full re initialization" (thats what they call it) and that will wipe everything. It will be like it just came out of the box.
bug splat said:
Here is the APK for 1.6.1. Its not the latest but it works
http://www.freewarelovers.com/android/download/temp/1311033049_com.facebook.katana.apk
Click to expand...
Click to collapse
Thanks for the .apk, I needed it too.
cant log in to FB still
there is something wrong beyond maybe i will go back to a really old version of android and try to do it that way, after the updates nothing really worked right
Hi,
Recently, I accidentally deleted my LG HOME app from my Optimus One (my phone was rooted). But since I was using GO Launcher Pro at the time, it didn't affect the phone functionality.
But then while playing with the phone I factory reset it, and whoosh ! I was left with no launcher screen at all (LG HOME being the default, which I deleted ). I was left with a blank screen, with just the notification bar.
HERE IS HOW I RECOVERED MY PHONE (and not the LG HOME app):
Step 1: Get a launcher app apk from somewhere and copy it to your SD card.
PS: Search on google 'go launcher ex apk' without the quotes. You can also search for ADW launcher or others (see android market).
Step 2: Turn your phone on.
Step 3: Get someone to call on your phone. Pick up the call.
Step 4: During the call tap the 'Add call button'. You will get the dialer pad, with contacts, call logs and favorites tabs as well.
Step 5: Go to contacts and click the menu hardkey to get the menu. Tap 'New Contact'.
Step 6: When you get the new contact form, tap the image with a '+' sign on it (It is used to add a contact image).
Step 7: Now you will get options as to where to get the file. Select OI File Manager.
Step 8: Navigate to the folder in which you copied the Launcher app (Go launcher, ADW Launcher or the like) and install it.
Voila ! You have a new launcher screen now.
PS : I was relieved when I finally got my launcher back. I was on the brink of flashing my phone to the stock KDW, which could've resulted in a bigger mess (Bricking etc.)
NOTE 1: If you factory reset your phone again, you will lose the launcher again, and will be back without a launcher screen. So make sure you don't do so lest you want to repeat Step 1 thru 8 again.
Word of advice: Make sure you have at least one launcher app installed on your phone (no matter which one, it should run).
USERS PLEASE UPDATE THE THREAD WITH OTHER ADVICES FOR THE PROBLEM.
vivek.28 said:
HERE IS HOW I RECOVERED MY PHONE (and not the LG HOME app):
Click to expand...
Click to collapse
Never thought there could be such a wierd workaround for this.
Thanks for the info though.
The easiest way would be to install another launcher using 'adb install'
Sent from my LG-P500 using XDA App
mihir287 said:
The easiest way would be to install another launcher using 'adb install'
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Yaa its the simplest thing to do, but I remember op had that problem and no one answered It.
Sent from my LG-P500 using XDA Premium App
But then you'd need to install all the android SDK and stuff on your PC.
This is just a work around. Of course, one would be in a problem if you don't have OI File Manager too.
Um, or use search button on phone and search for right app or what ever, search button on phone is pretty useful if you brick your rom. :]
vivek.28 said:
But then you'd need to install all the android SDK and stuff on your PC.
This is just a work around. Of course, one would be in a problem if you don't have OI File Manager too.
Click to expand...
Click to collapse
Sdk is just easy to install, there's also adbMadeEasy.exe (no sdk required) which you can use.
Sent from my LG-P500 using XDA Premium App
Thank you,very usefulll!
You really mess with your phone dont you...
really very simple and yeah weird method...
lolzzz....
didn't work for me
I get to Step 7: Now you will get options as to where to get the file. Select OI File Manager.
the only options i get are take a picture or pick from gallery.
there's got to be another way to do this
DjSidEShoW said:
I get to Step 7: Now you will get options as to where to get the file. Select OI File Manager.
the only options i get are take a picture or pick from gallery.
there's got to be another way to do this
Click to expand...
Click to collapse
Looks like you have no file manager installed, use the adb method.
Is my screen too bright, or am I just too ASIAN?!
I did it!!!!!!!
someone posted to use the search button, well, i used the search button to get me to 4shared.com and downloaded launcher pro. when it was done downloading i pulled down the notification thingy and pressed the download complete icon. it then installed launcher pro and everything is fine. thank u guys for all your help, and i hope this info helps someone else out.
Well,I have fastest method than this
Which I used when I do the same thing
Stock rom have default LG home which u deleted that,s why blackscreen comes
So
Just slide that notification bar and turn on internet and from PC go to market download launcher it will be directly download to your phone bcoz of on internet
And you got your launcher back
Or make flashable zip of home launcher and flash it
Sent from my LG-P500 using xda premium
lg home deleted
hi so i had a rooted optimus c and i had deleted lg home then rebooted my phone. i have no other home launcher so now my phone is stuck on boot screen. it keeps repeating the lg android screen. have i messed up my phone for good? is there a way to fix it. i cant even use my computer to veiw files on phone. not sure what to do i cant follow any of the forums cause i phone doesnt even fully turn on. can anyone help please im lost and not sure what to do. thanks xda members......
repost or email me if you have and answers please.
[email protected]
mohonthegreat said:
hi so i had a rooted optimus c and i had deleted lg home then rebooted my phone. i have no other home launcher so now my phone is stuck on boot screen. it keeps repeating the lg android screen. have i messed up my phone for good? is there a way to fix it. i cant even use my computer to veiw files on phone. not sure what to do i cant follow any of the forums cause i phone doesnt even fully turn on. can anyone help please im lost and not sure what to do. thanks xda members......
repost or email me if you have and answers please.
[email protected]
Click to expand...
Click to collapse
you have installed recovery mode? if you have flash in recovery the attachment.
Christian Nothing said:
you have installed recovery mode? if you have flash in recovery the attachment.
Click to expand...
Click to collapse
Hi Christian. Should I install the attached LG Home only if I have installed recovery mode? I still have access to cell phone's mass storage. Can I install it from there even if I haven't installed recovery mode?
hyperion.dt said:
Hi Christian. Should I install the attached LG Home only if I have installed recovery mode? I still have access to cell phone's mass storage. Can I install it from there even if I haven't installed recovery mode?
Click to expand...
Click to collapse
Yes you can extract the zip on sd card and you have to put the app in system/app and set the right permissions. You need root for this and a file manager that read internal storage like Es file explorer.
Hope you understanded my explanation
Sent from my LG-P500 using Tapatalk 2
I can get my table to root using nook zergy, but when it comes time to choose a launcher, I get to choose from 3...the two off the top of my head I can remember are AWD launcher and Honeycomb launcher.
When I choose either launcher, the files cannot be found and it moves on and tells me to press any key to continue. Then it moves on to the block OTA questions and blote removal option. I can get the system to reboot, but nothing is done. When I run nook zergy again it tells me that I do not have the "hijacker" installed.
I'm totally lost. Please help.
imotionsrt4 said:
I can get my table to root using nook zergy, but when it comes time to choose a launcher, I get to choose from 3...the two off the top of my head I can remember are AWD launcher and Honeycomb launcher.
When I choose either launcher, the files cannot be found and it moves on and tells me to press any key to continue. Then it moves on to the block OTA questions and blote removal option. I can get the system to reboot, but nothing is done. When I run nook zergy again it tells me that I do not have the "hijacker" installed.
I'm totally lost. Please help.
Click to expand...
Click to collapse
You need to either use adb hijack app to install the remaining things from nook zergy or factory restore and start from scratch
Sent from my Nook Tablet using XDA PREMIUM
ShinnAsuka said:
You need to either use adb hijack app to install the remaining things from nook zergy or factory restore and start from scratch
Sent from my Nook Tablet using XDA PREMIUM
Click to expand...
Click to collapse
I have done a factory reset 4 times. Will I need to install the hijacker after I root or before? Being the noob I am, I think I would install on the device, then root.
Any direction you can provide will be greatly appreciated. I'm not super technical, but I was able to root my nook color without issues.
Sounds like you just need to side-load in a replacement launcher, then eat a sandwich and drink beer. My preference is Go Launcher.
Hijacker is needed to allow a rooted tablet to be recognized by Zergy.
After a factory reset, you must "Unregister" the device to truly blank it.
If everything else went well though, sounds like you just simply need a launcher.
The_Joe said:
Sounds like you just need to side-load in a replacement launcher, then eat a sandwich and drink beer. My preference is Go Launcher.
Hijacker is needed to allow a rooted tablet to be recognized by Zergy.
After a factory reset, you must "Unregister" the device to truly blank it.
If everything else went well though, sounds like you just simply need a launcher.
Click to expand...
Click to collapse
i'm confident my resets worked since I got back to the factory tutorials and I had to register the device to proceed. Should I root and then side load?
imotionsrt4 said:
i'm confident my resets worked since I got back to the factory tutorials and I had to register the device to proceed. Should I root and then side load?
Click to expand...
Click to collapse
Use Ccleaner to clean up your pc off temp files, cache, etc and registries. Proceed with root. If you still have problems try in another machine (Windows is not your friend sometimes ... ok ok many times! )
changing computers helped. Still took me a couple of tries for some reason, but I made it work. So far my uncle is enjoying it.
Thank you all for your help.