First of all, I apologize in advance. I searched through everything and can't find my question. I'm a complete smartphone noob (got my first one a couple days ago--Canada's wireless providers are criminally expensive and I boycotted them as long as I could) and, while I'm reasonably good at technical things overall, I'm totally inexperienced here, with smartphones in general, Android, and it's parent OS Linux.
That out of the way: I have a Samsung Galaxy Ace, with Gingerbread 2.3.4 on it, through the provider Koodo. I am loving this phone, but I'm not entirely sure why certain things didn't work. There were apps I couldn't download due to a lack of space (despite a mostly empty 16GB microSD card), and apps that wouldn't install for other reasons. And always that frighteningly small 158MB system drive staring me in the face. So I decided to try to fix it.
I carefully read every bunch of instructions I could find and understand. Successfully rooted the phone. Installed ClockworkMod Recovery. I repartitioned the SD card with a big ext partition and swap space using CWM. I installed CF-Root-S5830_dtapps2sd-v1.2.zip successfully, and App2SD from the market.
This hasn't helped my free space at all. Nothing seems to be using that new ext partition. My available space did not go up at all...but (of course) my SD card space went down by the size of the new partitions.
I was under the impression there were kernels that could help your phone treat the SD card ext partitions like system space, but I can't figure out where or how for the life of me. Everything has worked, but it hasn't actually done anything.
-NoobGrrl
ur cf-root is not the latest, and I think if u make sd card partition by using cwm, the format will be ext3 not ext4.. so, u should try this step :
1. flash the latest cf-root v37-b82 through cwm from this post http://forum.xda-developers.com/showthread.php?t=1158197
2. partition ur sd card by using minitool partition wizard (google it) and make ext4 format.
3. flash the latest darktremor through cwm (don' forget to mount system n sd card) from this post http://forum.xda-developers.com/showthread.php?t=715116
4. install a2sd gui from market... done..
You probably forgot to move the dalvik cache to sd-ext from A2SDGUI.
To begin with, as you haven't done this before, I recommend you download the app link2sd rather than app2sdgui. Your system will be ext3 from CWM. Select and reboot. Then return to link2sd and you can move apps one by one or by batch installation to your partition by creating a "link". This method gives you finer control over which apps to move. It shows file sizes and how much of the app will be moved. After moving the apps reboot and hey presto - free internal memory.
I also recommend getting an app called DiskUsage to see what is taking up space and a file browser with root functions. I use Root Browser by jrummy16 - free on market.
Sent from a phone with an app.
First of all, thanks for the replies! I like the detailed instructions from musf especially...step-by-step for me is really the best way.
Okay, tried to follow those directions exactly. Minitool Partition Wizard has reformated the little 2GB partition I made on the SD card to ext4. Most recent CF-Root and dtapp2sd zips seemed to install fine. I think I mounted all the drives...I just do it from CWM, yes?
Downloaded A3SDGUI and it gives me an error:
Exiting A3SDGUI
Could not start for one of these reasons:
1. Your device is not rooted (it is, superuser shows access granted to A3SDGUI)
2. A3SD scripts could not be found (if so, no idea why.)
3. No EXT partition found (again, no idea why.)
Edit: Tried Link2SD and it gave an error as well, "Mount script could not be created. No such device."
Okay, so obviously it doesn't see my SD card's partition. So I put it back in my PC and recreated it again. No change at all...
yes from cwm, choose the "mount n storage" menu, then moutn system, then mount sdcard, then instal the darktremor zip file..
That seems to have almost worked...yes, I was mounting the drives after running DT. Duh. (I assumed somehow that DTapp2sd allowed me to set up the drives and I was telling the phone to mount it afterward so it could be used. I didn't realize DTapp2sd just needed to write to the drive.)
Almost. Almost worked.
Now, app2sd actually starts up successfully, no errors. (link2sd still gives the same error.) However, App2SD can't actually move anything. All items remain disabled, even after selecting them.
So then I remember the post above about the dalvik cache. So I go into App2SD and try to move it to the sd-ext folder, and it tells me there is not enough space. I have 124 MB of system memory left right now...and the SD card is mostly empty.
Follow the following instructions and tell me if they work:
(redo the steps even if you have done them already)
1. download cwm5 from the forum and place it into your sd card.
2. make a backup of your sd card and reboot your phone into recovery.
3. flash cwm5 file and reboot the recovery.
4. from the recovery, re-partition your card with a ext partition (you dont need more than 256-512mb. I have 16gb card and mine is only 256mb).
5. select swap if you want it.
6. ~partitioning complete~
7. Connect your phone to your computer with usb wire (while in recovery.)
8. mount usb storage from recovery.
9. copy the cfroot file to your memory card from pc.
10. unmount the usb storage.
11. mount system,sdcard, sd-ext (just to be on safe side) and flash with cfroot.
12. reboot.
13. open a2sdgui.
14. click yes, apps are on sd!, zipalign on boot is on!.
15. set swap if you want it.
16. from dalvik, click on dalvik cache on sd-ext and click move and rebuild.
17. your phone should reboot and you will be done
Notes: Its normal that after flashing a2sd script, your phone restarts a coupe of times so just leave it alone for a moment.
Don't forget to give superuser permission to a2sdgui.
If you still get some error, sty flashing the script again.
If it still doesn't get through, search for the dt a2sd beta 4 script and flash that from recovery. Other steps are the same!
Happy FLASHING
I'm using Clockworkmodace. That's 4, not 5, right?
I can't find a zip for CWM5 that is designated for the galaxy ace...
Here is CWM 5 : http://forum.xda-developers.com/showthread.php?t=1291327
Then , i would recommend you to use cyanogenmod 7.2 RC1 , it is better than a stock ROM
2 mistakes from redlag's instruction (cmiiw) :
first, cwm 5 is for cm7 based rom, dunno what'll happen if used on stock gb.. n second, point 4 can't be used, it'll make ext3 not ext4..
uninstall the link2sd then reflash the dta2sd (mount!) or uninstal the dt then reflash link2sd.. can't use both, they're like fire n water, lol.. u must choose..
musf said:
2 mistakes from redlag's instruction (cmiiw) :
first, cwm 5 is for cm7 based rom, dunno what'll happen if used on stock gb.. n second, point 4 can't be used, it'll make ext3 not ext4..
uninstall the link2sd then reflash the dta2sd (mount!) or uninstal the dt then reflash link2sd.. can't use both, they're like fire n water, lol.. u must choose..
Click to expand...
Click to collapse
I think cwm5 should work and i made it using point 4 and it works perfectly.
p.s. sd-ext are normally ext2, not ext3 or ext4. ext4 is normally used in internal.
EDIT: No it dsn't. Use cwm4. I guess that one has partitioning option too right? O easy way out, flash to ics1.2
aymi60 said:
Here is CWM 5 : http://forum.xda-developers.com/showthread.php?t=1291327
Click to expand...
Click to collapse
Edit: Ah, missed clarifications of my worried on the second page.
Then , i would recommend you to use cyanogenmod 7.2 RC1 , it is better than a stock ROM
Click to expand...
Click to collapse
What is cyanogenmod?
musf said:
2 mistakes from redlag's instruction (cmiiw) :
first, cwm 5 is for cm7 based rom, dunno what'll happen if used on stock gb.. n second, point 4 can't be used, it'll make ext3 not ext4..
uninstall the link2sd then reflash the dta2sd (mount!) or uninstal the dt then reflash link2sd.. can't use both, they're like fire n water, lol.. u must choose..
Click to expand...
Click to collapse
No go...no change at all.
IrishRed said:
What is cyanogenmod?
Click to expand...
Click to collapse
Go to recovery, Wipe cache/system/data. (make sure you have made a backup of your data.)
Mount the stuff and flash with http://forum.xda-developers.com/showthread.php?t=1258830
You have a new rom with dt a2sd running within
I'm going to try a different version of dtapp2sd first.
Should the ext and swap partitions be logical or primary?
I'm starting to think my EXT partition is not formatting properly in mini partition tool. Unfortunately CWM uses Ext3 and I'm told it's worse than Ext4 and Ext2 is better than both for an SD card.
Both primary. 1st one should be fat32 and second one should be ext2.
Well, good news and bad news. After some work, reformatting the partitions again, reflashing a new kernel, I finally got it working.
Trouble is, it's not stable. Apps keep crashing, the "Gallery" app only shows a black screen, and it randomly loses access to the FAT32 partition when running, and the SIM card occasionally says "Unrecognized" (forcing me to "restore to factory.")
*sighs*
Flash to the rom i linked you to.
Related
Download here - app2sd.ext4(modified 3.1.11)
Or if you want both, apps and dalvik-cache on SD - download here - app2sd.dc2sd.ext4
First of all make backup in xRecovery
Install app2sd through xRecovery - install custom zip
ext2 or ext3 or ext4 partition on SDcard needed
After app2sd installed, don´t turn the phone on without SD card with installed apps inserted, until it is really necessary
First boot after installation takes longer, depending on the amount of installed apps
If you make backup with xRecovery after installation -
- your personal data and setting of your apps will be backed up
- installed apps will no longer be backed up, but still remaining in the ext partition on SD card
If some app won´t work correctly, please reinstall the app from Market or from the file browser (rootexplorer) - you can find your apps in /system/sd/app directory
Compatible with JIT?
Yes, it is.
peetr_ said:
Download here - app2sd.ext4
Install through xRecovery - install custom zip
Click to expand...
Click to collapse
Could u upload the file on megaupload.com
Thanks,...
Ok... now it´s on megaupload.
Installed it, how can i check it? This is my first app2sd try
Sent from my E10i
In rootexplorer, /data/app - shows used and remaining space, added together it should be size of your ext partition.
Ok at first i didnt have a ext2 partition.
Now i have formated my sd card and app2sd seems to waork, my problem is after installing the uptade.zip my phone reboots and at first it shows all the apps in menu then they dissapear, i think theyre transfered to sd card. and then i can do nothing just have the standart apps, appbrain doeasnt works, cant start root explorer etc... but all m apps appera in the menu for deinstallation. Hope you can help me
EDIT//
after another restart everything seems to work fine
I am glad to hear that
Works well with my previous ext2 partition.
I already had app2sd working, and it still works this way.
I'm now trying a new sdcard. I formatted an ext4 partition in ubuntu, but the phone enters into an eternal loop. Don't know why, but it seams that it is not recognizing the partition.
Any Ideas?
Regards
Use ext3,for mini is better - stable
I made ext4 partition making first ext3 and then ext4 manually in xrecovery through adb with this tutorial http://forum.xda-developers.com/showthread.php?t=534714 and its stable.
But maybe ext3 is faster with our kernel. Dont know, didnt compared.
peetr_ said:
Ok... now it´s on megaupload.
Click to expand...
Click to collapse
Thanks brader.....
This sounds awesome but does this mean that I can have apps on ext2 + ext 3 which means double the amount of apps?
NO.On ext3 is better performance.
No, but you can double the amount of partition size
Nice so say I've doubled it, will it increase the amount of apps I can put on my mini? just want to know a bit more about this
peetr_ said:
Download here - app2sd.ext4
Install through xRecovery - install custom zip
ext 2,3 or 4 partition on SDcard needed
Click to expand...
Click to collapse
THANK YOU VERY MUCH !!!
now i have a question, i got a 1gb ext2 partition, would it be better when i format it in ext3 or ext4 ? i dont know wich class the microsd card is, its a 8gb....
I have ext4 but few people said ext3 has better performance.
I had no time yet, to try ext3.
I think 1 GB is too much, because there are still some data, that are stored in internal memory and when you run out of internal memory, remaining place in ext partition is unused.
500 MB is enough, this is not high-end phone and too many apps means more slowness and less stability, i think.
M
peetr_ said:
I have ext4 but few people said ext3 has better performance.
I had no time yet, to try ext3.
I think 1 GB is too much, because there are still some data, that are stored in internal memory and when you run out of internal memory, remaining place in ext partition is unused.
500 MB is enough, this is not high-end phone and too many apps means more slowness and less stability, i think.
Click to expand...
Click to collapse
Can I skip doing ext2 just make ext3 n 4..then intall the zip file using recovery?to make partition ext3 or 4 using same method of make partition ext2?
sent from my E10i
Darktremor apps2sd force all your apps to sd right. would you recomment it?
please teach me how to install it step by step.
Is there any good launcher i can use beside launcher pro with megatron rom. i most prefer we can create category in the menu. thanks and peace off
shotgun32 said:
Darktremor apps2sd force all your apps to sd right. would you recomment it?
please teach me how to install it step by step.
Is there any good launcher i can use beside launcher pro with megatron rom. i most prefer we can create category in the menu. thanks and peace off
Click to expand...
Click to collapse
Hey guys, i really really need to put all my apps to sd card. i dont get it. my total phone memory is 199mb but i count all my downloaded apps that saved to my phone memory are just only 80mb.where does my 119mb goes? please guys help me
shotgun32 said:
Hey guys, i really really need to put all my apps to sd card. i dont get it. my total phone memory is 199mb but i count all my downloaded apps that saved to my phone memory are just only 80mb.where does my 119mb goes? please guys help me
Click to expand...
Click to collapse
Some goes to your cache, dalvik-cache, messages, pretty much anything else. Some are on the system partition.
Also, regarding the Darktremor question, I'm one of those people who would say no. Actually, it's up to you. I just stick to FroYo's way of doing it, since I get to have more control and stuff over what goes to the SD and what stays in the phone memory (eg launchers and keyboards).
kpbotbot said:
Some goes to your cache, dalvik-cache, messages, pretty much anything else. Some are on the system partition.
Also, regarding the Darktremor question, I'm one of those people who would say no. Actually, it's up to you. I just stick to FroYo's way of doing it, since I get to have more control and stuff over what goes to the SD and what stays in the phone memory (eg launchers and keyboards).
Click to expand...
Click to collapse
For 119mb? thats too much. i think its bcos the megatron rom installed eaten up my phone memory.
Why you didnt recommend the darktremor? i just want to put my downloaded apps from the market that cant be move to my sd card. is that ok?
http://forum.xda-developers.com/showthread.php?t=926015
download the last flashable .zip
partition your sdcard as explained in the "void rom" thread
put the .zip in the root of your sdcard
wipe everything
flash you rom,then the darktremor zip.
andreamaisto said:
http://forum.xda-developers.com/showthread.php?t=926015
download the last flashable .zip
partition your sdcard as explained in the "void rom" thread
put the .zip in the root of your sdcard
wipe everything
flash you rom,then the darktremor zip.
Click to expand...
Click to collapse
Thanks. but what does partition your sd card and wipe everything do? i always ignore that if want to flash things. btw im using megatron rom not void?
if your using megatron then darktremors a2sd is already part of the rom so u dnt need to install it. how many apps do u have anyways?
akitos said:
if your using megatron then darktremors a2sd is already part of the rom so u dnt need to install it. how many apps do u have anyways?
Click to expand...
Click to collapse
hmm but why some of my apps cant be put to sd card.
so far, i have installed 40 apps. only 15 of them cant be put in sd card. the rest in my sd card. but i had to delete 3 to free up my phone memory cause currently my phone memory is 19mb.
is there any other way? if there arent. then there is no point of having 8gb its better just to have 512mb sd card. grrrr
well,if you have not partitioned your sd....there's no way the app2sd included in megatron can work!!
ok,make a backup of your sd,then in recovery mode select
partition sdcard > partiton sd
then select
partition sdcard > SD:ext2 to ext3
then select
partition sdcard > SD:ext3 to ext4
now it should work.
if it doesn't,reflash your rom after a complete wipe (you'll lose all your data and settings)
andreamaisto said:
well,if you have not partitioned your sd....there's no way the app2sd included in megatron can work!!
ok,make a backup of your sd,then in recovery mode select
partition sdcard > partiton sd
then select
partition sdcard > SD:ext2 to ext3
then select
partition sdcard > SD:ext3 to ext4
now it should work.
if it doesn't,reflash your rom after a complete wipe (you'll lose all your data and settings)
Click to expand...
Click to collapse
omg i have do all that, then when i reboot my phone. my scree goes blank. i must installed rom but how can i copt it to my sd card to install it. or teach how to install it from customre covery? helppp
Press the 3 key combo to get in (vol down + home + power) then use the volume buttons to get to USB-MS toggle. You use the menu button on the very right side of your phone to enter. It will allow you to copy the ROM from your pc to the sd card. Remember to exit USB mode afterwards.
Hello.
I just got an HTC Hero, and I've faced the problem of lack of space already.
So I read about this app, unaware I would need it (naive of me), while I was downloading the VillainRom v13, to replace the VillainRom v12 I had.
I flashed it succesfully. I installed the apps I had before. But now, unfortunately, I'm running low on internal space.
How can I move application to the SD card? Is there a tutorial that explains me how to do it for my phone and rom?
How can I determine if my SD card is fast enough?
Thanks for any help you can provide.
to move applications just go to settings>applications>manage applications and click on which ever app you want to move to sd card. Once you click on the app it'll go to a page which will allow you to move your app to the sd. Usually class 4+ SDs are fast enough
The question is that I have tried that... But I don't have that option!
I believe it is because I'm on the 2.1 rom, instead of 2.2, and that option was only introduced in 2.2.
welll, im not sure how to do it without wiping and starting all over again but,
if you make a nandroid.. then backup your sd card onto your computer(including the nandroid backup)
you could go into your recovery image and partition your sd card, swap - 32mb, ext2 - 512mb and fat32 the rest (it takes you through those settings step by step)
then wipe factory reset/all data and wipe your dalvik cache
then flash your rom (double check that the rom has a2sd).. and the rom will do the work for you!
i just did this with wildhero... its the only rom im 100% sure will do the a2sd for you
xsirhc6x said:
welll, im not sure how to do it without wiping and starting all over again but,
if you make a nandroid.. then backup your sd card onto your computer(including the nandroid backup)
you could go into your recovery image and partition your sd card, swap - 32mb, ext2 - 512mb and fat32 the rest (it takes you through those settings step by step)
then wipe factory reset/all data and wipe your dalvik cache
then flash your rom (double check that the rom has a2sd).. and the rom will do the work for you!
i just did this with wildhero... its the only rom im 100% sure will do the a2sd for you
Click to expand...
Click to collapse
Thanks!
I was struggling with this aswell
The thing is my ClockWork Mod doesn't have that formatting option...
Does VR13 support A2SD natively? I believe so.
I use HTC HD2, Android on SD card, don't know how to use A2SD ?
Now i use Swapper2 to set Swap file.
Following from this thread, I finally partitioned my sd card and had link2sd installed in my ace.
http://forum.xda-developers.com/showthread.php?t=919326
I moved my apps using apps2sd. I found out there are some remaining data in the phone. Are those data : dalvik-cache (.dex) file and lib files (.so) ? Or those are the game saves data. So, if i use Link2SD, i can completely move those data to sd?
It shows an error when I try to start it.. I could not link any of the apps.
Mount Script Error
Mount script cannot be created.
mount: mounting /dev/block/vold/179:2 on data/sdext2 failed: Device or resource busy
Click to expand...
Click to collapse
my 2nd partition is on fat32
did u create both partition as primary?
btw i still think link2sd is buggy and annoying. at least in my experience. sometimes it fails to mount partition during booting and just prompt to reboot, or the moved app wouldnt even show in app drawer.
A2SD works perfectly for me.. There aren't many functions as Link2SD but it does the job..
an0nym0us_ said:
did u create both partition as primary?
btw i still think link2sd is buggy and annoying. at least in my experience. sometimes it fails to mount partition during booting and just prompt to reboot, or the moved app wouldnt even show in app drawer.
Click to expand...
Click to collapse
Yes, both are primary as guided from the thread. :S
So any other than link2sd that can fully move an apps including it's data etc. My internal memory getting full soon.
Pahan88, is App2SD free same thing as A2SD?
here if we said a2sd or app2sd it generally means dartremore a2sd. u need to be rooted, and if ur on gingerbread u need to use kernel which support init.d script which is ketut's cfroot kernel. darktremore a2sd can move apps, data and dalvik cache to sdcard
edited: sorry, just realize ur thread title said cm7 kang. ur already rooted and using cfroot. u just need to flash darktremore a2sd via recovery
Thanks.. Do you mind showing me the right thread? I did a search and there are so many threads about it.. I dont even know which one is the right one.
partition ur sdcard with two partition, both primary. 1st partition as fat32 and 2nd partition as ext2/ext3/ext4
get the flashable zip file from its thread here
put it in sdcard, boot into cwm and choose to mount system and mount data.
choose to install zip from sdcard and flash the earlier zip file.
get terminal emulator from market, open it and do
Code:
su
a2sd reinstall
and ur phone will reboot.
when it boot up, open terminal again and do
Code:
su
a2sd cachesdreset
to move dalvik cache to sdcard, or
Code:
su
a2sd datasd
to move data to sdcard
Hi, I got a new sd card 4gb. But I partitioned using CWM. I checked through MiniTool Partition Wizard, it didnt show any 2nd partition but it did shows reduced MB. Partition via CWM is ok?
And no-one points the poor guy to s2e
Hi there. I saw the information there. Sounds so simple.. Is there anything I should know before I try it? And im not a guy btw.. THanks ^^
WishFinder` said:
Hi there. I saw the information there. Sounds so simple.. Is there anything I should know before I try it? And im not a guy btw.. THanks ^^
Click to expand...
Click to collapse
Sorry, but Yea its that simple But if your a frequent backup/restorer kind of person, using advanced mode may get very confusing and you will get force closes as it brings anything you moved to SD-EXT. Don't worry about the Cache size and ext4 journaling in the settings.
to use link2sd with CM7 KANG rom .just mount the second partition as ext3 format.link2sd will work.
scoffyburito said:
Sorry, but Yea its that simple But if your a frequent backup/restorer kind of person, using advanced mode may get very confusing and you will get force closes as it brings anything you moved to SD-EXT. Don't worry about the Cache size and ext4 journaling in the settings.
Click to expand...
Click to collapse
mm when i run the s2e, I cant click on anything except the "Download cache" part. The others, I cant tap on it. Cant move my apps..
Hello all,
few days ag I asked how to move internal apps to SD with Titanium Backups. Hitesh2626 recommeded me to use another method : http://forum.xda-developers.com/showthread.php?t=2082465 and I did so.
I've followed the guide but I did not succeed and I think I konw why: when I run CWM I don't have any /sd-ext partition.
I've followed all the steps under "Partition SD Card" , and I've used ext2 for formatting the new "memory" .
Anyone has had the same problem? Anyone could help me to find what am I doing wrong?
TIA,
Arnau
pelacables79 said:
Hello all,
few days ag I asked how to move internal apps to SD with Titanium Backups. Hitesh2626 recommeded me to use another method : http://forum.xda-developers.com/showthread.php?t=2082465 and I did so.
I've followed the guide but I did not succeed and I think I konw why: when I run CWM I don't have any /sd-ext partition.
I've followed all the steps under "Partition SD Card" , and I've used ext2 for formatting the new "memory" .
Anyone has had the same problem? Anyone could help me to find what am I doing wrong?
TIA,
Arnau
Click to expand...
Click to collapse
Were you able to create the mount scripts? Can you elaborate the problem that you are facing?
mahithm said:
Were you able to create the mount scripts? Can you elaborate the problem that you are facing?
Click to expand...
Click to collapse
Hello, first of all, thanks for your answer.
I guess you are talking about step 11, just after chossing the filesystem type:
10) First , Choose ext2. If it don't work then restart Link2SD and when then don't choose ext2 but ext4. ( Don't worry , it works )
11) It will say mount script created. Reboot your phone now.
Click to expand...
Click to collapse
If so, yes, after chossing ext2 it does not complain. After reboot I see a second partition "/data/sdext2" : Total:0.89GB used 64,91MB Free: 850MB.
(is it ext2? If I plug the mobile into my linux box it says it's FAT32):
Code:
Device Boot Start End Blocks Id System
/dev/sdc1 1 13564453 6782226+ c W95 FAT32 (LBA)
/dev/sdc2 13564454 15564799 1000173 83 Linux
Teh "problem" comes when doing "Placing the 2nd partition of SD Card to internal." :
18) Foramt /data /sd-ext /system
Click to expand...
Click to collapse
I don't have that "/sd-ext" partition, so I cannot format it.
But I've continued with the manual and tried to install an app (whatsapp). Now Link2sd says that the app has been linked, the /data/sdext2 partitoin now shows 85,97MB used but when I go to apps, manage apps, I see that my mem has decreased in ~ 20 MB . Is that the expected behaivour?
This I explain myself clear? if not, sorry but I'm newb to this world
TIA,
Arnau
pelacables79 said:
Hello, first of all, thanks for your answer.
I guess you are talking about step 11, just after chossing the filesystem type:
If so, yes, after chossing ext2 it does not complain. After reboot I see a second partition "/data/sdext2" : Total:0.89GB used 64,91MB Free: 850MB.
(is it ext2? If I plug the mobile into my linux box it says it's FAT32):
Code:
Device Boot Start End Blocks Id System
/dev/sdc1 1 13564453 6782226+ c W95 FAT32 (LBA)
/dev/sdc2 13564454 15564799 1000173 83 Linux
Teh "problem" comes when doing "Placing the 2nd partition of SD Card to internal." :
I don't have that "/sd-ext" partition, so I cannot format it.
But I've continued with the manual and tried to install an app (whatsapp). Now Link2sd says that the app has been linked, the /data/sdext2 partitoin now shows 85,97MB used but when I go to apps, manage apps, I see that my mem has decreased in ~ 20 MB . Is that the expected behaivour?
This I explain myself clear? if not, sorry but I'm newb to this world
TIA,
Arnau
Click to expand...
Click to collapse
Yes, that's how Link2SD works. It will link the data associated with the app to ext partition. If you go to the Settings> Storage, you will see that the total internal memory remains the same. But you can still see the available memory has increased due to linking to ext. To see how much of the ext partition is used, just go to Link2SD> Storage. Now if you are not satisfied with Link2SD, you can try the CronMod Unofficial. First backup all the SD Card data. Also if you want to try CronMod Unofficial after installing Link2SD, it better to flash the custom rom again after formatting /system and /data from CWM. This will get rid of all Link2SD files which can otherwise mess with CronMod Official. Now go to CWM> Format /sdcard. This will delete the ext partition. Now CWM> Advanced> Partition SD Card> Size (Max 1GB, anymore and system will lag)> Swap (0MB) and wait for it to say "Partitioning done". Now download and place CronMod Unofficial to SD Card. Now again go to CWM> Mounts & Storage> Mount /system then flash the Cronmod Unofficial zip from CWM and finally unmount /system. Reboot and you are good to go. Now go to Settings>Storage to see the newly increased internal memory. Here is the link,
Cronmod Unofficial
Hope I Helped
Hi mahithm,
mahithm said:
Yes, that's how Link2SD works. It will link the data associated with the app to ext partition. If you go to the Settings> Storage, you will see that the total internal memory remains the same. But you can still see the available memory has increased due to linking to ext. To see how much of the ext partition is used, just go to Link2SD> Storage.
Click to expand...
Click to collapse
ops... I expected more space for installing apps, not just for data. Ok, I can install more apps than before, but not all the ones I want.
Now if you are not satisfied with Link2SD, you can try the CronMod Unofficial. First backup all the SD Card data. Also if you want to try CronMod Unofficial after installing Link2SD, it better to flash the custom rom again after formatting /system and /data from CWM. This will get rid of all Link2SD files which can otherwise mess with CronMod Official. Now go to CWM> Format /sdcard. This will delete the ext partition. Now CWM> Advanced> Partition SD Card> Size (Max 1GB, anymore and system will lag)> Swap (0MB) and wait for it to say "Partitioning done". Now download and place CronMod Unofficial to SD Card. Now again go to CWM> Mounts & Storage> Mount /system then flash the Cronmod Unofficial zip from CWM and finally unmount /system. Reboot and you are good to go. Now go to Settings>Storage to see the newly increased internal memory. Here is the link,
Cronmod Unofficial
Click to expand...
Click to collapse
A couple of questions:
1.-) So, with this method I'll be able to install all the app in SD?
2.-) 7-Flash your desired script : what does it refer to?
3.-) It also refer to sd-ext, but I can't format that partition... (as it was my original problem). is cronmod going to use it even if I don't format it? (as link2sd has done).
Hope I Helped
Click to expand...
Click to collapse
Yes!! Thanks a lot!
Arnau
pelacables79 said:
Hi mahithm,
ops... I expected more space for installing apps, not just for data. Ok, I can install more apps than before, but not all the ones I want.
A couple of questions:
1.-) So, with this method I'll be able to install all the app in SD?
2.-) 7-Flash your desired script : what does it refer to?
3.-) It also refer to sd-ext, but I can't format that partition... (as it was my original problem). is cronmod going to use it even if I don't format it? (as link2sd has done).
Yes!! Thanks a lot!
Arnau
Click to expand...
Click to collapse
1. Yes with this method you'll be able to install all apps to the ext partition of the SD Card as long as you have free space on ext partition
2. Flashing the desired script refers to flashing the script in question, i.e., CronMod Unofficial
3. Can you tell me what happens when you try Mounts & Storage> Format /sd-ext? CronMod uses you ext partition even if you don't format it. Its not compulsory and CronMod should work fine.
Sorry for the late reply. If you have anymore doubt, post here. I'll be glad to help
mahithm said:
1. Yes with this method you'll be able to install all apps to the ext partition of the SD Card as long as you have free space on ext partition
Click to expand...
Click to collapse
Great. But since yesterday I've been experience speed "problems". I'm wondering if makes snes to gain space but lose speed... Maybe I try and decide with this new method. (Maybe the ROM also affects? ace-i-sure 8 to 12 could cause such speed issues?)
2. Flashing the desired script refers to flashing the script in question, i.e., CronMod Unofficial
Click to expand...
Click to collapse
Why just say so thanks!
3. Can you tell me what happens when you try Mounts & Storage> Format /sd-ext? CronMod uses you ext partition even if you don't format it. Its not compulsory and CronMod should work fine.
Click to expand...
Click to collapse
I'll let you know after trying it, it will take a couple of days
Sorry for the late reply. If you have anymore doubt, post here. I'll be glad to help
Click to expand...
Click to collapse
You don't have to apologise!! Many thanks for your detailed answers and for your time!!
Cheers,
Arnau
Hi,
after a couple of days I've seen that the speed problems do not compensate teh fact of having more apps installed, so I'm not going to try this new approach.
I've re-flashed the rom without using externad SD and it's running really fine.
Many thanks for your help dude!
Cheers,
Arnau
pelacables79 said:
Hi,
after a couple of days I've seen that the speed problems do not compensate teh fact of having more apps installed, so I'm not going to try this new approach.
I've re-flashed the rom without using externad SD and it's running really fine.
Many thanks for your help dude!
Cheers,
Arnau
Click to expand...
Click to collapse
Glad I could help And yes irrespective of what method you choose to increase the internal memory, there will always be a lag after you exceed a certain number of app install. This is because in all cases the /data is moved to ext partition of the SD Card. SD Card R/W speed is always lesser than internal memory R/W speed. You can control this lag to a certain extend by using class 8 or higher SD Card and only installing necessary apps.