Hello All,
Is there an app that can dim the screen of my Archos 101, and return the screen to predefined brightness with the touch of the screen?
My device is mounted on a wall and the power button is hard to get too, so having a screen dimmer that can return the screen to normal use seems like the way to go.
Or what about the screen never going to sleep, but have it do an auto dim down after a set amount of time and with the touch of the screen it returns to normal usage?
At this point I would settle for work around.
T.I.A.
u may try the app "tasker" wich has a function for brightness level...
so u can at set an idle time to turn it down,.. and hopefully also one to "unidle" or screen tap. Sadly im not sure about that exactly as i dont use takser frequently... just try it out
I also remeber an app wich was able to set a little overlay area to the screen on wich u could slide to turn up/down brightness - so u can slide down to turn it off - and up to turn it on (or left/right,...).
Will search if i can find its name... cant remember atm.
Both methods would require to disable auto turn off on idle function...
As u can WAKE UP the device with the screen while it's in sleep.
Hello FrEcP!
Thanks for the reply.
Will look at Tasker now, seems to be many options so I will need to sit down and have tea to figure this out
Screen Filter
Allows you to even set the level to dim screen to. Simple tap on it to dim, and another tap to make it normal.
Hello diablo009,
Thanks, that may be what I need!
I bought Tasker cause it is important to support our developer
Tasker did make and is still causing my brain to tingle!
Will give Screen Filter a try too.
PamelaGirl said:
Hello diablo009,
Thanks, that may be what I need!
I bought Tasker cause it is important to support our developer
Tasker did make and is still causing my brain to tingle!
Will give Screen Filter a try too.
Click to expand...
Click to collapse
Screen filter is more like a manual one. You got to click on it to enable or disable it.
O.K. so I tried Screen filter and it is a 50/50 solution. Yes it does dim the screen but it is manual whereas I ned something more automatic.
As for Tasker, I have drunk two pots of tea, and energy drink, and gone through two days and still this powerful app is a bit of a challenge to setup.
Anyone with experience setting up Tasker?
OBJECTIVE:
1. After 10 minutes of idle have display dimm to 50% brightness, and never shut-off.
2. With the tap of the screen have display return to 100% brightness.
In exchange for help I would be willing to baking you homemade cupcakes!
T.I.A.
PamelaGirl said:
O.K. so I tried Screen filter and it is a 50/50 solution. Yes it does dim the screen but it is manual whereas I ned something more automatic.
As for Tasker, I have drunk two pots of tea, and energy drink, and gone through two days and still this powerful app is a bit of a challenge to setup.
Anyone with experience setting up Tasker?
OBJECTIVE:
1. After 10 minutes of idle have display dimm to 50% brightness, and never shut-off.
2. With the tap of the screen have display return to 100% brightness.
In exchange for help I would be willing to baking you homemade cupcakes!
T.I.A.
Click to expand...
Click to collapse
yes another problem with screen filter is - it just sets an over lay in gey color - wich means actualy your screen still is at fully brightness (wich is annoying at night /u still got an ugly high glow of the backlight + doesn't save power [k is minor for a wallmount - but still should be considered] )
Well if you would have told that (objectives) more early - your solution would have been more easy
I thought u wanted to completely turn off the screen while being idle....
Anyway:
Settings->Display->Display Timeout->10min
Settings->Display->Brightness->full
Settings->Applications->Development->Always stay on/Stay active...->true
Does exactly what u want - after the timeout (10min) the screen dims (to about 50% or lower) - sadly i can't tell how to affect this value (but it seems its the lowest value the default brightness controll, let u set)
On touch - u got the full brightness... till timeout is reached again.
Device wont ever go to sleep.
Hello FrEcP,
Your instructions worked!
50% auto dim is more on target than before, and I return to baking
Apologies for not being more clear in the beginning.
This is from the Taker Forum:
"Unfortunately you can't do this, Android doesn't provide APIs for apps
to test idle time or respond to screen taps (unless it's in their own
UI)."
Thank you again FrEcP, and diablo009!
You help to make this forum rock solid with your sharing.
workaround with screen filter works fine
I use Screen Standby on my Xoom tablet for this exact same feature. It allows you to set at what time the tablet automatically dims. I have it set for 5 minutes. And then I just tap the screen with my finger and it wakes up. It is also nice to note that tapping the screen does not push any buttons but rather just wakes the device.
https://play.google.com/store/apps/details?id=com.nkahoang.screenstandby&hl=en
Lo
Related
I have recently installed cyanogen on my desire and have found the mod to be an absolute joy to use. The one irritation however has been the automatic screen dimming. Every 6 or 7 seconds or so the screen dims itself. This can become very annoying when reading long messages or any other text. I have looked on lots of threads but have found no answer to my question. Surely there must be a simple solution to turn off this automatic dimming setting?
Thanks
HomeGrownHeroz said:
I have recently installed cyanogen on my desire and have found the mod to be an absolute joy to use. The one irritation however has been the automatic screen dimming. Every 6 or 7 seconds or so the screen dims itself. This can become very annoying when reading long messages or any other text. I have looked on lots of threads but have found no answer to my question. Surely there must be a simple solution to turn off this automatic dimming setting?
Thanks
Click to expand...
Click to collapse
I think....(not exactly sure) but that may be apart of the actual rom, if there is no setting under display then its probaly built in that way. Under settings/display you can change the screen time out if that help
reply
I've played around with all the settings myself and have so far been unsuccessful. Its not a problem really, just a bit annoying. I just find it hard to believe such an awesome mod doesn't have a simple off switch.
If anyone knows of a way to extend the screen dimming then that will help too.
I think what you're looking for is the Sleep setting. Go under Settings -> Display -> Sleep, and select a longer time interval if needed. Your current setting might be set to sleep after 15 seconds, causing the screen to dim at 6-7 seconds. Change it to maybe 1-2 minutes.
yes you can. Put the widget 'Power Control" on the home screen and you can do it easily from there. Thats how i do it.
Recently I installed cm 12 but I have a problem ie the screen backlight is always on when the screen is off........I need help.....
ananthur said:
Recently I installed cm 12 but I have a problem ie the screen backlight is always on when the screen is off........I need help.....
Click to expand...
Click to collapse
setting /display
or
setting /button/backlights
BatDroid said:
setting /display
or
setting /button/backlights
Click to expand...
Click to collapse
but the brightness adusting is also not working
Hi,
Since a couple of days I've noticed that my screen flickers sometimes.
Mostly when I'm moving my hand while holding the phone...
Is it possible that the light sensor auto adjusts my screen brightness ?
If so, how can I turn it off ?
Thanks in advance,
Niels
If you have rooted the phone, you can install Disable Auto Brightness for Xperia phones. or you can disable it manually editing the file /ect/hw_config.sh.
Search the forum for the tutorial
Thanks for your answer !
So unless you start rooting or changing files there's no way to stop the flickering ?
Unfortunately, no. By the way, this problem usually affects st15 models... as far as i know, you've been unlucky
Okay, I'm sure now that it's really because of the lightsensor and not just a problem with my screen.
I was standing near a window and when I put my finger on the lightsensor a few times the brightness was clearly automaticly adjusted...
I'll look for the tutorial, thanks for the info !
Other solutions, if any, are still welcome though
Niels
NelisC said:
Okay, I'm sure now that it's really because of the lightsensor and not just a problem with my screen.
I was standing near a window and when I put my finger on the lightsensor a few times the brightness was clearly automaticly adjusted...
I'll look for the tutorial, thanks for the info !
Other solutions, if any, are still welcome though
Niels
Click to expand...
Click to collapse
Hey, my ST15i does also automatically adjust the brightness....it's not a problem mate When i am outdoors the screen get brighter but when i am indoors my screen automatically gets darken
Yes I now, but I find it annoying, it gets flickery sometimes..
I want the screen to stay on the brightness I've set.
today I was wondering why this phone doesnt have auto brightness adjustment feature, because I have to manually turn brightness to zero when using phone while on bed at night. I looked into settings and no such feature found, I wonder the light sensor actually works
Yes it does, I've tested it.
Try standing near a window or holding it near a lamp and put your finger on the sensor... (The screenbrightness may not be set to 0 if you try this..)
I too find it strange that there's no possibility to set the auto adjust on/off..
Niels
I don't think there is any auto-brightness option in LWW as I've not found any. if there were any then they would have provided an check box option turn it on/off. but the brightness ups and downs happens to me to specially when i've put the brightneww to lowest level at night. could not explain myself.
yup it works (just checked thru window operation )
S.Nahid said:
I don't think there is any auto-brightness option in LWW as I've not found any. if there were any then they would have provided an check box option turn it on/off. but the brightness ups and downs happens to me to specially when i've put the brightneww to lowest level at night. could not explain myself.
Click to expand...
Click to collapse
The fact that you can't turn it on/off doesn't mean it doesn't work. Actually, the auto-brightness is always on. You can disable it manually editing /etc/hw_config.sh or using the app Disable Auto Brightness Xperia. You need root anyway.
As many of you may know, for newer version of TS (at least for 4th List, May version devices), it's NOT possible to flick your wrist to show watch face since the Accelerator is DISABLED whenever screen is OFF!!!
What an oversight! A smart watch needs you to push a button to see time? What if when you are driving or have both hand full and cannot spare even a finger!?
(My Pebble, on the contrast, works great here!)
I tried to force the screen always on with watch face, it's great, except it kills my battery in around 6 hrs (airplane mode!) Not acceptable!
Thus, Here comes "Tasface". With this, you could achieve:
1. Let TS shows you time WHENEVER you LOOK at the watch! (well, actually when the watch is face up) or when you flick your wrist (You can modify this!)
2. Reduce using your button (if you have an Shortcut supported launcher like Smart Launcher 2)
DISCLAIMER: I will not be responsible if Tasface broke/brick your TS in anyway! Since Tasface is only a set of Tasker profiles/Tasks you can read everything before decide go or not! Tasface DO mess around with system files!
Pre-requests:
===============
1. Your TS must be ROOTED!
2. You need to know Tasker basics! (It's not THAT difficult to use Tasker...)
3. Tasker (Obviously)
4. Watchface by Kurt Huwig (I didn't test other watchface app. May not work with stock lock watchface) https://play.google.com/store/apps/details?id=de.huwig.watchfaces
5. Secure Settings (Required) https://play.google.com/store/apps/details?id=com.intangibleobject.securesettings.plugin
6. Smart Launcher 2 (Optional, any Launchers supports Shortcut will work. With this you can activate Watch face without using button!) https://play.google.com/store/apps/details?id=ginlemon.flowerfree
Set-up
========
1. Have Tasker (required), Watchface (required), Secure Setting (don't forget to install system helper) and Smart Launcher 2 (Optional) installed. DO NOT IMPORT "Tasface" yet!
2. Disable your stock lock watchface: Go to Setting/Personal & Account/Security/Screen lock/None (<-- This IS IMPORTANT)
3. Launch Watchface by Kurt Huwig, than double tap on any watchface to enter setup
a. check "Keep screen on"
b. Select desired watchface from "Lockscreen face"
c. Recommended to disable all other options
4. Check if the Watchface work or not by turn off than turn on your TS by press the upper physical button. You should see the Watchface you selected shows up when screen on. Swipe to return to your launcher and launch Tasker.
5. Unrar and import Tasface into Tasker
6. Close Tasker
7. Turn off --> Turn on your TS with the upper button
8. Profit!
Notes
=======
1. When watchface is displayed:
a. Touch screen is DISABLED to avoid accidental touch.
b. Screen will be OFF after 8 seconds (you can setup your prefer time)
c. Touch screen lock is achieved by putting a transparent Tasker Scene element on top of the Watchface. A small "X" on bottom right screen is used to reactivate the touch screen. You can also push the lower right button (back) to reactive your touch screen.
2. To show watchface (after automatic screen off as Step 1)
a. Just face the watchface up. The watchface should appear for another 8 seconds
b. There maybe a 1~2 second delay. This is due to Tasker not detecting the Watchface up event. I cannot do anything about this....
c. You could change the watchface up to anything else, like "Sensor shake/Backware-Forward"
3. If you have "Smart Launcher 2" or any other launcher supports Shortcut, you can set a icon to task "Lock". With this TS will activate watchface WITHOUT touch physical button. (I heard horrible stories about broken button so want to avoid use them as much as possible!) It's normal the screen will off for 2 second than back on with watchface for 8 seconds!
4. You must wait for automatic screen off or use the "Lock" shortcut to turn off the screen! Tasface will NOT work if you turn off TS by pressing the upper right physical button. This DISABLE the accelerator as mentioned above. To reactive Tasface, just turn on TS by pressing the upper right physical button to show the watchface than wait for automatic screen off.
I wrote this primarily for myself so a there are a lot of bugs. You are free to modify it and make it better. Just let me know if you have any questions and need help or improvement here!
Thanks button is just a click away if I helped you!
Update the attached file to resolve some bugs and improve responseness
Technical stuff -- What is done here?
=================================
It's a bit technical here .... No need to read if you don't care how it works!
Since TS turns off the accelerator whenever screen off, so it's not possible to activate the screen once it's off by external conditions. (You can still set a timer to wake the screen, but it's meaningless)
Thus we need to disable the power hungry backlight while keep the screen on!
I found out that it's possible to control the backlight by doing
Code:
echo 0 > /sys/class/leds/lcd-backlight/brightness
Thus, I set up a Task profile which fires whenever Watchface is activated and TS is face up, to activate the backlight then turn off the backlight again after 8 seconds, but KEEP the TS screen wake! (Only backlight is turned off to save battery!)
Code:
echo 1 > /sys/class/leds/lcd-backlight/brightness
You can change "1" to anything from 1~255. I just found 1 bright enough for me
Since screen/system is always wake, to avoid accidental touch, a transparent Tasker Scene on top of the screen is add to disable the touch screen. A small "X" is on the bottom right to disable this transparent scene if anything goes wrong. (And it does, Tasker is laggy sometimes and too slow to remove this scene automatically!)
I also lower down the CPU cycle to the lowest possible to further saving battery. CPU returns to normal frequency when leaving watch face (into launcher, etc...)
That's all! Folks!
Reserved
Shake
I was able to use application Shake from ADL Dev (com.adl.appshaker) to switch screen on with shake/twist of wrist. You just have to enable "activate when screen off" option - and it is little battery hungry.
Of course I have version 20140513.
I also strongly suspect, that you can force sensors to work when face is off, by switching into "Sports mode" (Run Settings->SMART MODE->Sports Mode)
Piw said:
I was able to use application Shake from ADL Dev (com.adl.appshaker) to switch screen on with shake/twist of wrist. You just have to enable "activate when screen off" option - and it is little battery hungry.
Of course I have version 20140513.
I also strongly suspect, that you can force sensors to work when face is off, by switching into "Sports mode" (Run Settings->SMART MODE->Sports Mode)
Click to expand...
Click to collapse
Thanks for the advice.... I just think since I already have Tasker on my TS, I want to find a way to not to use additional SW which always runs in background to monitor things... Since its battery hungry, maybe Shake also use the same trick as me......
As for Smart mode settings, I tried bdefore but none of them work for flick wrist to wake up... Maybe I missed something?
Sent from my HTC_One_max using XDA Premium HD app
might give this a shot since shake was waking up watch at wrong times and was destroying battery life, and i already have tasker on the watch and running so hopefully that will avoid the battery loss that shake had.
lssong99 said:
As for Smart mode settings, I tried bdefore but none of them work for flick wrist to wake up... Maybe I missed something?
Click to expand...
Click to collapse
I was just guessing, because it suppose to leave GPS and accelerometer working with screen off, to enable sport trackers and pedometers.
If it works? - I haven't tested yet...
Piw said:
I was just guessing, because it suppose to leave GPS and accelerometer working with screen off, to enable sport trackers and pedometers.
If it works? - I haven't tested yet...
Click to expand...
Click to collapse
Wow! It seems you are right! The watch DOES allow sensor to work on Sport mode after screen off, but the response from Tasker become very sluggish when screen-off!
I made a simple profile to detect shake action (if shake than beep), and when screen on, the watch beep in less than one second after shake began, but when screen-off (sport mode), It took Takers 5~6 seconds of continuous shaking to detect the shake event. Not very practical for a watch solution...
With my Backlight solution, although sometimes still hiccup happens, but my feeling is about 90% of time the watchface wakeup correctly...
tasker problems
lssong99 said:
Wow! It seems you are right! The watch DOES allow sensor to work on Sport mode after screen off, but the response from Tasker become very sluggish when screen-off!
I made a simple profile to detect shake action (if shake than beep), and when screen on, the watch beep in less than one second after shake began, but when screen-off (sport mode), It took Takers 5~6 seconds of continuous shaking to detect the shake event. Not very practical for a watch solution...
With my Backlight solution, although sometimes still hiccup happens, but my feeling is about 90% of time the watchface wakeup correctly...
Click to expand...
Click to collapse
i can not import to tasker tasker do not see it
pashka79 said:
i can not import to tasker tasker do not see it
Click to expand...
Click to collapse
Do you mean the Tasker cannot see the prj file?
For how to import project, you could check http://tasker.dinglisch.net/userguide/en/faqs/faq-how.html#q
and you need to put the unrared file (.xml) in /sdcard/tasker/projects for Tasker to see it...
How much does this cost in battery? If I don't use my watch I can get about 4 days out of it.... I know Shake stops the TS going into deep sleep, won't this do the same and annihilate battery??
death_entry said:
How much does this cost in battery? If I don't use my watch I can get about 4 days out of it.... I know Shake stops the TS going into deep sleep, won't this do the same and annihilate battery??
Click to expand...
Click to collapse
Don't know for tasker but I'm using shake app from market and I even I thought it'll drain my battery very fast - it didn't...
It's almost like I don't have it...
My battery can't hold on more then 24hours but I really use my watch and it's constantly connected to wifi and BT.
Sent from my C6903 using Tapatalk
funky0308 said:
Don't know for tasker but I'm using shake app from market and I even I thought it'll drain my battery very fast - it didn't...
It's almost like I don't have it...
My battery can't hold on more then 24hours but I really use my watch and it's constantly connected to wifi and BT.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
Ah that's prolly why you don't notice it running down... what do you use your watch for? Tbh i haven't used it for more than a watch lol/...
death_entry said:
Ah that's prolly why you don't notice it running down... what do you use your watch for? Tbh i haven't used it for more than a watch lol/...
Click to expand...
Click to collapse
Well as I have Z1, which is quite big, I'm using TS mainly to receive notifications (using swapplink).
I'm receiving many emails (I'm using Z1 as my business phone) so it's great that I can see on my TS subject of email and decide what will I do.
I have sim card in TS and I use it all the time, when I'm alone in a car (and that's 6 hours per day )
I found TS quite practical for companion
BTW...from today, I'm using this app to help me save my battery power on TS and Z1
http://forum.xda-developers.com/showthread.php?p=53078670
Sent from my C6903 using Tapatalk
lssong99 said:
Do you mean the Tasker cannot see the prj file?
For how to import project, you could check http://tasker.dinglisch.net/userguide/en/faqs/faq-how.html#q
and you need to put the unrared file (.xml) in /sdcard/tasker/projects for Tasker to see it...
Click to expand...
Click to collapse
I tried this and Tasker can't see the xml on my TS
Here's a workaround for those having issues seeing the xml file in Tasker
Using a file manager, navigate to the location of the xml file
"Open with.." and choose Tasker
You will then see a toast notificaiton saying "...can be opened in Tasker" (or something like that)
Open Tasker -> Preferences -> UI -> Untick "Beginner Mode"
Back to main Tasker screen
In the HOME icon (bottom left) -> Long press, and choose "Import", then look for the XML file, wherever you put it
Boom
Note: Make sure you have the correct app from the Play Store, and not from the Ostore (same app, different names)
death_entry said:
How much does this cost in battery? If I don't use my watch I can get about 4 days out of it.... I know Shake stops the TS going into deep sleep, won't this do the same and annihilate battery??
Click to expand...
Click to collapse
I am afraid that this will have an impact your battery. Basically to make TS responsive (light up as soon as you raise your hand), the screen/CPU is kept wake. Only LED backlight is disabled.
Although in my implement I put the CPU is slowest frequency and sleep Governor, but battery is around one day usage without radio on....
We need kernel tweak of this to achieve good battery life... Tasker is only... Tasker...
jeremy.chan said:
Here's a workaround for those having issues seeing the xml file in Tasker
Using a file manager, navigate to the location of the xml file
"Open with.." and choose Tasker
You will then see a toast notificaiton saying "...can be opened in Tasker" (or something like that)
Open Tasker -> Preferences -> UI -> Untick "Beginner Mode"
Back to main Tasker screen
In the HOME icon (bottom left) -> Long press, and choose "Import", then look for the XML file, wherever you put it
Boom
Note: Make sure you have the correct app from the Play Store, and not from the Ostore (same app, different names)
Click to expand...
Click to collapse
Thanks I see it now.
put the unzip file at that location and still Tasker cannot see it?
Hi do read the solution I provided
Tapa-ed from the Sony Z Ultra
Change the minimum brightness level from usual 10 to 1. It doesn't modify the autobrightness level map so automatic brightness won't be lowered (though it can be easily adjusted on CM11).
This is so far exactly the same as GravityBox offers (modifying 'config_screenBrightnessSettingMinimum').
But Minimum Brightness offers one unique feature - it also modifies the lower brightness levels in MX Player (free/paid). Because no matter whatever you use manual or auto brightness, MX Player always uses minimum brightness of 0.05 (12/255, 19/255, 27/255, 36/255...). To actually lower the brightness, you would have to turn off brightness control in MX Player or use one of many 'overlay filter brightness app'.
So Minimum Brightness module retains the same quadratic function for brightness levels but includes lower values (1/255, 4/255, 9/255, 16/255, 25/255...).
Minimum Brightness uses value 1/255 which might not be suitable for every display (meaning LCD) but it suits perfectly my Super AMOLED screens (Galaxy S5 / Galaxy Tab S 8.4) and watching videos at night is still enjoyable.
There are many excellent auto brightness apps (Lux, Darker etc) that can use overlay filters to lower brightness even more so it's up to everyone to try and decide.
This module has been merged into new module http://forum.xda-developers.com/xposed/modules/mod-xposed-tweaks-cm-t3279109. Please check that module for any future updates.
Hello! Thanks for the mod, I will test
Works very nice on Xperia Z2, however minimum brightness is absolute darkness Could you please add an option to define minimum brightness value?
_mysiak_ said:
Works very nice on Xperia Z2, however minimum brightness is absolute darkness Could you please add an option to define minimum brightness value?
Click to expand...
Click to collapse
The situation is the same on my Xperia SP. When I set the brightness to miniumum the screen is totally black, also when the backlight decreases after 10 seconds screen gets black.
Hi! Tried min brightness but when screen is set to the lowest level, I get a white screen after locking the phone.
Sent from my DIAMOND D1 using XDA Free mobile app
Really great tweak!! I'm noobie in Android enviroment with my new Elephone P3000S and the lowest screen brightness is to high for me so your tweak is very usefull.
I also have the issue that the lowest brightness level sets the screen completly black and I have been scared for 1 hour truing to solve a completely black, touching all buttons but the phone didn't "wake up". Finally, pressing power buttom + volumen up + home soft key it has worked :angel:
So it would be very important to prevent black screen by allowing the user to set the minimun level.
Thanks!
Hey, I know making GUI is a pain in the ass so can you please make alternative version with minimum brightness set to 2? That will satisfy most of people complaining here. Your app is currently the only dimmer working on lollipop.
Dri0m said:
Hey, I know making GUI is a pain in the ass so can you please make alternative version with minimum brightness set to 2? That will satisfy most of people complaining here. Your app is currently the only dimmer working on lollipop.
Click to expand...
Click to collapse
I will have a new device soon so that could make me change my mind about lowest value and UI.
@Dri0m
In the first post you can find archive containing multiple versions of module with different low values.
How to disable this module...?
I installed this module last night, enabled it in Xposed Framework, but did nothing with it. Then this afternoon I opened the Settings menu, went to Display, and before I could do anything else I received a phone call. As I terminated the call, the screen flashed, the phone rebooted--and after restarting it is completely, or almost completely blank. If I repeatedly tap the power button I get a fraction-of-a-second glimpse of the SIM PIN screen at normal brightness. This leads me to the suspicion that, by some weird combination of bad luck and an accidental touch of a finger after terminating the phone call, that the Minimum Brightness somehow got set--although why the phone then rebooted I don't know.
Anyway, by luck and good judgement I finally managed to enter the correct SIM PIN and then the phone unlock PIN. However, I can do nothing else. The screen is still blank, and as the phone is currently unlocked I don't want to touch the power button. Before sending the phone back to the manufacturer or anything drastic like that, I would like to try disabling the Xposed Framework. Whilst trying to find something useful in Windows Explorer I found Xposed-Disabler-Recovery.zip in the Internal storage\Android\data\de.robv.android.xposed.installer\files folder on my phone. I assume that this should be what I need. However, as I cannot see anything on the screen I would need to know the exact buttons to press, in which order and how many times etc, in order to enter the Recovery menu and do what is needed. According to the phone manufacturer the OS is unmodified Android 4.4.2., although strangely they will not even tell me which keys to press to enter the Recovery menu (long story, the upshot is, they flat out refuse to help apart from suggesting returning the phone).
Note that I only suspect it is the Minimum Brightness module that is causing the problem, however the problem did not exist before yesterday (when I installed the module), and as I was about to do something with the brightness when the phone rebooted itself, it seems too much of a coincidence to be anything else. If I cannot disable the module/framework, the only other thing I can think of is a factory reset--but again I would need to know exactly which buttons to press, in which order etc. Unfortunately at the moment USB debugging is not enabled, and again without the screen I cannot access it to turn it on.
Any help or suggestions hugely appreciated.
PL
@Papalazzzaru
Xposed now sports a safemode which allows you to disable Xposed during bootloops. To disable Xposed, you'll have to repeatedly tap one of the hardware buttons (Power, Volume, or Home) on your device during startup.
During boot, your device will vibrate twice when it detects the first key press. You'll then have five seconds to press that same button four more times, with each keystroke producing a short single vibration. After ending with a long vibration, your device will disable and prevent most of Xposed's actions, allowing you to easily troubleshoot problematic modules.
Sorted
Outstanding, thanks.
Papalazzzaru said:
I installed thi............. gely appreciated.
PL
Click to expand...
Click to collapse
Device model please?
Caterpillar S50, on Android 4.4.2, baseband version LTE_S0201121.0_S50_0.017.00.
it is compatible with lollipop?
imam88 said:
it is compatible with lollipop?
Click to expand...
Click to collapse
The MX Player part still works. I don't know about the lowest value of brightness in general but at least with CM12 & Samsung the brightness goes to the hardware minimum by default.
Thanks, this is exactly what I want.
Could you make it for LP ?
I want my phone be absolute zero brightness for driving navigation.
Tested it on CM12.1 Nightly on the Nexus 6. It works here, but on 0 the screen is a bit purple. However, I guess this is the screen's fault
Gesendet von meinem Nexus 6 mit Tapatalk
moneytoo said:
The MX Player part still works. I don't know about the lowest value of brightness in general but at least with CM12 & Samsung the brightness goes to the hardware minimum by default.
Click to expand...
Click to collapse
Yes it works
This module seems to be working well on the Moto X Pure Edition (Motorola xt1095) running Lollipop 5.1. It's an AMOLED screen, and I personally find the minimum brightness on 5.1 too bright, so this has helped solve that.
Hello smart people! I just got the phone yesterday, super excited about the custom roms! My question the scrren keeps dimming while im using the device. It not only just dims but it acts like it tries to go to sleep, While im using it! It wont Reconize any touch, till i kinda wake it up. It does this multiple times a day. My brightness is set to auto, figured it might help with the battery drain, but other than that i'm not sure what setting I ticked to get it todo this.
BTW: I'm not rooted, nothing weird on this device, just apps
hatchetwarrior92882 said:
...It wont Reconize any touch, till i kinda wake it up. It does this multiple times a day. My brightness is set to auto, figured it might help with the battery drain, but other than that i'm not sure what setting I ticked to get it todo this.
BTW: I'm not rooted, nothing weird on this device, just apps
Click to expand...
Click to collapse
Auto brightness will definitely help with battery drain, but probably not in the way you're thinking. Pretty sure turning off auto brightness will help with the fading, but we'll need more info as far as diagnosing your lack of responsiveness to touch.
What (if any) case do you use/do you have a screen protector of some sort? Is it when you are outside in the freezing weather that you notice a lack of sensitivity in your touchscreen? Do you have any "battery saving" apps that you're currently running?
I didn't think about the battery saving apps causing this
Do you have Paypal installed? If so, uninstall it
Auto birghtness on LG phones is terrible. Try installing Lux Auto Brightness on the store, it's a lot better. Also, you can set your screen off time in the settings higher, it's probably set to stock of 30 seconds
Lux is what I use.