I updated my tmobile radar 4g about 3 days ago and since then my phone restarts few times a day. Am i the only one or someone else having the same problem?
The update i am refering to is :
http://www.wpcentral.com/t-mobile-radar-4gs-software-update
Windows Update
I downloaded the update and i will test it to see if the same happens.
Update done
I did the update yesterdya and so far so good.
The only thing is tha tit is showing that HTC Hub and Netflix apps need to be updated but the updates do not download.
Related
since iv done the latest update on the software, my emails dont connect now,,,any one else had this problem and can help??
Hi all,
Firstly can I say thankyou to all of you at these forums, I've been a lurker for a while, waiting for my Prime to arrive, and I'm very grateful for all your insights!
I have now recieved it and seem to avoided most of the well-documented problems on here, but seem to have managed a new one (at least i couldn't find a similar one through searching).
So I updated the Prime with the new firmware and it all seemed to go well. After a while the notification popped up to do the camera firmware (as I had been expecting from these threads). I set it going, and after a short while it said it was complete. The next time I powered on however, the notification to update the camera firmware was back, so I did it again (thinking it must be additional one). But it keeps doing the same thing - saying it's successful, only to re-appear after a re-start.
My current versions are
Build - 8.8.3.33 (which i know is what it should be)
Camera - 0xFFFFFFFF (which I know is wrong!)
Anyone else had a similar problem? Or any ideas?
I have no idea if it's possible, but I am also wondering whether this is what's causing my auto-rotate not to work. Just to confirm, I have the auto-rotate set on, and the gyroscope doesn't seem to be working for anything else (tried it on riptide demo)
Any ideas would be greatly appreciated!
you should try reflashing .33 from the ASUS hosted file...i think there are a few threads about where to get it.
tdrussell said:
you should try reflashing .33 from the ASUS hosted file...i think there are a few threads about where to get it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1429067
Mine is completely borked. After installing ICS I got a notification for a camera firmware update. The update failed several times, and now when I launch the camera app it says it won't work without updated firmware...
EDIT: I rebooted and as soon as it started up it bugged me to install the camera update again. I made sure the screen stayed on while it updated this time and things seem to have worked out. Camera is working just fine!
I like to share a very useful trick to everyone who use the jetstream with non AT&T sim.but want to update the firmware over the air.
HTC was only allowed update over the air if you use at&t sim and you have a data plan on it but with this trick you can bypass the restriction and use the ota firmware upgrade service like any unbranded, sim free htc device.
First you need to download quick system info pro app from market. Launch the app.
Scroll down and click to more info.
After that the hidden factory "about tablet" menu will appear and at the top you can see the software update. Tap on it and tap to search for updates right now.
Do not thick and turn on the scheduled update scan.
I attach some pictures.
Küldve az én HTC PG09410-emről Tapatalk használatával.
Please use wifi connection. Ota update need wifi connection.
Küldve az én HTC PG09410-emről Tapatalk használatával.
Please share if you can successfully update your device with this method. I hope someone can confirm this to work caus my device have the latest firmware and the update check says no available update.
Küldve az én HTC PG09410-emről Tapatalk használatával.
I confirm its working! at least i tried and it worked for me.
I downloaded the application from the market.
I opened it and went to more info. and the software update was there.
I pressed on software update (while i was on Wifi with Orange SIM card) and then pressed "check now"
I was connected via wifi and the check towards at&t server was done.
Got a message that my device is update to the latest and no new update was found.
Well Done!
A good useful way to get future update without AT&T SIM.
Sent from my HTC PG09410 using xda premium
Great feedback. Please try as many jetstream user as can. I hope I can help you
Unleash your unlocked Jetstream power!!
itzik-g said:
I confirm its working!.. A good useful way to get future update without AT&T SIM.
Click to expand...
Click to collapse
Dito everything you said in your post. Same with the Jetstream here and hopefully the update will appear at some point to update my unit.
Followed the instructions and received an update to software number 1.30.502.1
Thanks for the tip.
Interesting... yesterday it said no update. Today, though, it said there was and the unit updated to the latest ROM. HUGE thanks for the tip!!!!
Hi,
I tried these instructions for updating my htc jetstream. It did show that a new version available, etc and even downloaded the necessary files. However, while updating, the screen went balnk, then it shows the android bot with a front panel open and a RED EXCLAMATION MARK - the type that would mean some problem encountered. I thought it might be a part of the update process. Have left it as it is and there has been no change since the past 15-20 minutes. Did anyone face this problem? Also, how long did it take actually to update the software?
Please help ASAP.
Screen shots attached..
No problem. Try to update your device with official ruu
feherhollo said:
No problem. Try to update your device with official ruu
Click to expand...
Click to collapse
It was stuck on that screen for over an hour. So I connected it to the comp, used adb reboot bootloader as it recognised the device connected, did a factory reset and it worked finally. Though the update has not yet been applied. Will leave it for now and will try it again after some exams I got till the 1st of March.
Thanks anyways for the help.
kailashpchhabria said:
... it shows the android bot with a front panel open and a RED EXCLAMATION MARK - the type that would mean some problem encountered.
Click to expand...
Click to collapse
Yes the update has various reboots, blank screen moments, etc yet never had that screen image like yours. The update takes about 15 minutes.
enjoythemusic said:
Yes the update has various reboots, blank screen moments, etc yet never had that screen image like yours. The update takes about 15 minutes.
Click to expand...
Click to collapse
Guess must be some problem because it was stuck on that screen for around an hour. I must have done something wrong or something. In any case, reserved the update for a later-after my exams are done.
Thanks to all for the help.
So this method is successful? Can anyone update his device with this ota update?
I hope I helped a lot of you with this.
Küldve az én HTC PG09410-emről Tapatalk használatával.
Like the title says, did you get tango on mozart without forcing it yet?
Is it actually delivering to any mozart yet? Could we be waiting indefinitely here??
Since its a minor update i dont feel like forcing the updating, too tedious...but doesnt mean i dont want the update at all. So hopefully it is coming to all phones.
yep, got it on my unbranded mozart last week without forcing. unfortunately after the update i noticed 2 drawbacks: the keyboard automatically pops out after sending a text (it used to stay hidden), and sometimes there's a slight lag when going to the settings
So...its more like a downgrade than an upgrade
Orz...
yep, that lag can be really annoying, it's android all over again. can't wait for the 7.8 update
Received official Tango update on my unlocked Mozart last night.
Haven't noticed the keyboard popping "up" after sending a txt. It just stays in place after sending.
I have absolutely no lag when going into settings at all. Wasn't sure if you meant messaging settings or device settings so I tried both. No lag anywhere.
God I love WP!
Hi smart people :good:, hope you can help me
I bought a used O mate True smart and i got it today. Its almost new other than some apps installed you couldn't tell it was used. when I turned it on for the first time i got a notification for an update. Current: Truesmart-20140328-1744. I went to settings>system>about true smart>wireless update.
It says that I need to update to a newer version (there is nothing written in the release notes) and the size of the update is 6.03 MB. when i pressed Download it says that there is an unzip error and it stops the download. How can I update my device and fix this error? its not an internet connection issue, I tried going online with the browser and it works fine.
My second problem was with the O Store, i presume that this is where I download apps I want on my watch when I start the app, it just shows me a rotating circle and it says "Data Loading". Its been like that for more than 2 hours .. like i said, its not an internet issue, i went on the browser and it works fine.
Third problem was with an app called Whats App (it was already installed when i had it). it says "your phone date is inaccurate! Adjust your clock and try again". I tried network provided time, GPS provided time and even put the time and date manually, still don't work
Also, when i try to download any google play app from the browser, it says "Browser is no longer supported".
this is really frustrating.. i cant do anything with my watch!
hope you can help me