[How to] --->You Want Better Battery Life:::Read This - Vibrant Q&A, Help & Troubleshooting

Battery Life on a SmartPhone - The Riddle, The Enigma​
Attaining 20+ hours of battery life is not only possible it is totally attainable with most phone configurations. The secret to making this happen is, understanding what are the contributing factors are and knowing what to do first.
This guide will help. After reading this guide, you will be able to understand how to end power eating culprits and answer those same questions we see over and over in the threads...... that is .... solving the passive battery drain and get the 20 hours of battery life we all want and desire.
I have tried to get almost everything I can think of and put it in one place. We have all seen the threads that say, “Please help with my battery issue”, “Does undervolting save you battery life” or “Getting horrible battery life” (and yes I did use the…SEARCH Button…and these are titles directly from the Q & A section).
Post 1: Tips and Tricks
Post 2: Roms/Kernels, OverClocking/Undervolting and Memory Management
Post 3: Apps (for your download pleasure)
I will be using satirical stories and anecdotes to get my point across below. Not meant to offend or point fingers at anyone. I am just using real life references to get to the point. Also I am not much for fancy colors. I tried it at the top here but not so much further down. If there is something specific I want to call attention too, I will BOLD it and maybe RED it too.
This is not a GUIDE to get better battery life but rather a GUIDEline to get it. What is the difference, you say? A Guide is a step by step process that you must/should follow to get the outcome that the person who created it wanted you to get [A+B+C+D should = E]. A Guideline is more of a recommendation that allows some choice or flexibility in the understanding, execution or use [A +B-(C+D) can = E].
As we all know, all Vibrants are not created equal and so if something works for one person and not the other, then is it a software, hardware or human error. Chances are it is a combination of all three. Hopefully this can slim those down a bit and answer some questions that you might have or have seen.
**Special thanks to NOOB_IN_N33D for his help in gathering info, especially the MIUI/CM7 parts below. Do yourself a favor and hit up his Guide- Easily Flash MIUI for Vibrant. It has themes, modems, kernels,… and he really put a lot of time and effort into it. It is stickied in the QA section so it shouldn’t be too hard to find. Hit his thanks button please.**
TopShelf10 has this to say about getting the most out of your battery life
the problem is, people want to believe that they can save battery without changing their usage habits. this simply is not possible. no rom or kernel will realistically do this for you. if you remove 1 brick from a bag full of 15 bricks, the bag will be lighter, but still very heavy. you need to download "spare parts" or "process monitor" from the market and start analyzing the way your apps are acting. also look into data syncs that are happening in the background. apps that stay open behind your back/what they are doing 9an app called "autostarts" can prevent apps from self-running under certain scenarios). animation speed. polling for notifications. gps. wifi scans. overclocking. cpu/ram usage. proper sleep. widgets. brightness. 2g/3g. data usage. call time. text volume. - THESE are the things that really affect your battery life.
bottom line is, if you truly want to save battery you are going to have to get your hands dirty...there simply isnt a one-click (or one-flash) solution.
Click to expand...
Click to collapse
Below is a list of fundamental things that can be done without rooting or custom ROM/Kernels. (Standard disclaimer applies: You use it, you set it and you are responsible)
1. Be Realistic -
Do you really think that you can get two whole days out of your battery? If you do, then you must have a very important pile of papers it is sitting on to not even pick up your phone for that long. These are phones. These are mini-computers. These are arcade games. And they want, dare I say, need to be played with, talked on or downloaded to. USE YOUR PHONE.
2. Syncing –
I know you are very important and you need to know what LeBron is doing right now, just in case you get a cup for a coffee and he might be in Starbucks at the same time and you get your picture taken with him and upload it to Facebook, Twitter or Google+. That is fine and I applaud you for it and will probably download the picture and Photoshop myself in your place. This is not the problem. Syncing your accounts is. That is what is causing battery drain. Do you really need to have your FB widget (see widgets section) streaming all day long? Does Kim K.’s endorsement of a potato chip really affect your everyday life? I doubt it. Kill them (not LeBron or Kim K. but rather the auto-syncing). Every time you “friend” someone their numbers, contact info gets sync’d to your phone. Also, there are settings in Facebook, Twitter and Google+ that you can upload pictures instantly. Don’t do that. Once you do, it is out in the Ether-World and just swallowed a bunch of battery doing it too.
Settings>Accounts and Sync>Auto-sync>uncheck it
3. Widgets –
They look cool. But widgets are nothing more than RAM and battery hungry monsters that you purposely put in your home screen. Think about it. What does a widget really do? All it really does is monitor an app that you have running. So not only is it running and taking up battery and RAM but the app that it is linked to is running in the background al’ a Facebook, Twitter, Google+, CNBC, MSNBC, BBC,… the list goes on and on because they want us to put THEM on our home page. What a great marketing campaign the widget is. “Hey look at me new home screen” “Cool. Hey what widget is that?” “Oh, it is X” “Nice, I’ll have to download that tonight when I get home” and then and there they have you and your battery.
4. Apps –
You have to pay attention to your apps. I repeat. You have to pay attention to your apps. Especially if they run in the background. This can be anything from a harmless .99c game to a monster like Live Wallpaper. The battery drain threat is twofold here because the app is running in the background but it could also be using its anonymous data collection abilities and sending that back to the Mothership. Ever wonder why you have a H with up and down arrows in your status bar when your phone is just sitting there? This is because some app is transmitting data, whether you are using it or not. There are apps in the market that monitor these situations like Watchdog or kill the data link when the lock screen is enabled like Juice Defender (see Apps below) or you can adjust app permissions like LBE Privacy Guard. Data transfer is #2 on the What Kills My Battery list.
5. Display/ Wifi/ Airplane Mode/ Animations –
Display:
#1 when it comes to what is eating your battery. Always has been and always will be. Accept it and try to do something about it. This part is easy. Just lower the brightness. You can use Auto or set it as a brightness that is low but you are still able to see well enough to function. Live Wallpapers fall into this category. They are cool to look at but static ones take up less RAM and also less display because they are not running all the time in the background. These screens are bright at 100%, so tone it down. (see Apps below).
WIFI:
Another helpful tip is setting your WIFI sleep policy to Never. This can be done by going here Setting>Wireless>WIFI> Menu key>Advanced>WIFI Sleep Policy and set it to Never.
Airplane Mode Toggle:
NOOB_IN_N33D found this helpful trick too. Phazeman...
"Toggle the airplane mode on/off 3 times in a row, that will reduce your Cell Standby battery usage.
It should only be necessary to do it once after flashing but if you think Cell Standby uses too much power at some stage you could toggle again the airplane mode"…Phazeman
Animations: Set Settings > Display > Animations to "Off or Med. animations.
These are 5 fundamental things that you can do to help reduce battery drain and get some more life out of your phone. Anyone can do these. All you have to do is watch your phone and use some common sense. “Why does my battery drain after only 6 hours? All I was doing was checking Facebook.” Do you really need to be on Facebook for that long of a time? I doubt it. How many services do you have running? How many tasks do you have running? (Android does a good job of shutting down tasks on its own, but if you are using a task killer, it takes more juice to start up an app than to turn it back on, so to say.) Think of it like an airplane. Takes more fuel to get up in the clouds, but once you are up there, it is pretty much coasting along with way less burn.
Special thanks to Oka1, NOOB_IN N33D and chamonix
**************************************************​**THE PETITION ** We need your support!!!​
Click the above link to find out more​
Hit the thanks button

ROMs/Kernels, Overclocking/Undervolting and Memory Management
ROMs are key things to think about when it comes to battery life. They can be fully established and working fine, can be RCs and still in development or they can be Alpha/Betas and completely experimental or just beginning. Choosing the best ROM or Kernel is going to depend on what YOU want out of your phone. Do you want a stable 2.2 ROM that has great battery life but not the customizability as MIUI or CM7? Do you want a Gingerbread AOSP ROM that has memory leak issues? There is the rub because CM7 and MIUI have fantastic customization possibilities Gingerbread is well Gingerbread but it has its own issues, and 2.2’s are about as basic as they come. However 2.2’s, because they are so old and overworked, have been Optimized to their fullest and some outstanding tweaks have really brought them to the forefront in daily drivers. Again, the choice is up to you.
Kernels go hand-in-hand with your ROM. Does the kernel support Overclocking or Undervolting. How much RAM and what tweaks are included in the kernel? Does THIS kernel work with THAT ROM? These are all spelled out for you in the OP of each kernel (and ROM) for you to find out. Read them because if you don’t, you’ll bork your phone and then your next post will be, “Help. I Bricked my phone”.
Froyo Kernels (see here) and read their OPs. Many can be Overclocked and some can be Undervolted
Battery Friendly Kernels for MIUI/CM7:
Glitch and Bali-CM (there are others but NOOB_IN_N33D gave me these to put in here). Read their OPs to find out more of what they do.
Overclocking/Undervolting –
If you don’t already know what Overclocking is, well it is pretty much self-explanatory. You can Overclock your CPU above the clock-speed that Samsung, T-Mobile governed it at. This can be done with apps like Tegrak’s Overclock (for stock kernels), SetCPU (here and here), CPUtuner,…Generally have to be ROOTed to do these but if you are flashing ROMs and Kernels then you probably already are. UnderVolting is basically what it sounds like too. You are Undervolting your CPU to conserve battery.
This can be one of the best ways for a more advanced user to save battery. Overclocking is great to see those really cool Quadrant scores. Wow!!! But it also ramps up the battery drain, as well as temperature which can shorten your battery’s TOTAL life. If you want to Overclock to 1.2-1.7 just to see what you score on Quadrant or SmartBench, then do it for that time. Most ROMs/Kernels run stable and smooth at or about 1.0-1.2 with minimal effects on battery (as long as you do tweaks in above post). If you decide to Undervolt you can use Pimp My CPU or Voltage Control to do this but take care to step it down slowly until you find the right settings for you or you will see random reboots or phone freezes and those suck trying to diagnose.
***Please note that whether you Overclock or Undervolt, do NOT “Set on Boot” until you know that they are going to work. Otherwise if it doesn’t work and your phone randomly reboots, you will get into a boot cycle (not a bootloop) because you put them in “Set on Boot”. You must test before you should do this.***
Glitch (Kernel for MIUI/CM7) –very brief overview-See its OP for more
- Up to 1.7GHz CPU OC with added bus/GPU OC (Thanks to morfic for the great base of work)
- Undervolting using Pimp my CPU or Voltage Control
Bali_CM (Kernel for MIUI/CM7) –very brief overview-See its OP for more
- OC/UV up to 1.4GHz (Safe boot to 1GHz) [require SetCPU from market]
- Multiple CPU governor, smartass included (default: ondemand)
- Multiple IO scheduler (default: BFQ)
- CIFS support
- Support SetCPU screen off 100/400 profile
NOOB_IN_N33D is running MIUI and is having great battery life for a 2.3.x ROM. He has given me his settings for Overclocking and Undervolting to put in this guide.
**Please note that these are HIS settings for HIS set-up. They may not work for you but it is a good idea to see what I am talking about when it comes to OC/UV**
N00B_IN_N33D's OC/UV
N00B_IN_N33D said:
These are my SetCPU settings for my phone running MIUI + Glitch (High Leakage)...
Main:
Max: 1000 Max: 1200
Min: 100 OR Min: 100
Scaling: smartassV2 or conservative Scaling: smartassV2 or conservative
Profiles:
Screen Off Max: 400 Charging Max: 800
Min: 100 Min: 100
Scaling: lazy Scaling: Conservative
Voltage:
1500 MHz -25 mV
1440 MHz -75 mV
1400 MHz - 75 mV
1200 MHz - 75 mV
1000 MHz - 125 mV
800 MHz - 150 mV
400 MHz - 175 mV
200 MHz - 225 mV
100 MHz - 250 mV
Click to expand...
Click to collapse
KaintFM's OC/UV
KaintFM said:
Rom MIUI-NB
Kernel Glitch v12 ML
Modem KB5
Main:
Max: 1400
Min: 100
Scaling: Performance
Profiles:
Screen Off Max: 200
Min: 100
Scaling: On-Demand
Voltage:
1400mhz - 75uv
1300mhz - 75uv
1200mhz - 75uv
1000mhz - 100uv
800mhz - 125uv
400mhz - 150uv
200mhz - 250uv
100mhz - 475uv (can't believe it's stable, but it is-his words, not mine)
Click to expand...
Click to collapse
Memory Management
Did you know that you can also free up some internal memory space by just basic maintenance? You can install a Cache Cleaner from the market. I use Cache Cleaner NG (root) and CacheMate (root) which will clear your cache for you, Cache Cleaner NG will even clear your cache on your SDcard. Open Root Explorer and if you see a bunch of free floating cache files, those need to go. Wasted space. Small in the scheme of your SDcard, but still wasted.
So here we go (best part is at the bottom though):
Ok so you go into XDA on your phone, go to the themes page and look at what and how people are theming their phones or see some pix of someone's SetCPU profiles. All those develop a cache that takes up space on your phone. Now lets say that you go to the market and look through some apps or update your apps (more on this later). This also generates cache, usually up to 2-4mb. Ever try to download something from the market and it says something like "not enough space". This not needed cache may be some of the reason.
Here are some tricks and apps that some of you may know and also some tricks that I have found that I am sure most don't know about.
SOME GOOD LOW MEMORY APPS:
Cache Cleaner NG and Cache Mate (both root and free-Cache Mate has a paid but the free one works just fine.)
Diskusage (free) ~ This one will show you a graphical version of your /data/apps and also you SD card to show you exactly what is taking up so much space. You can click on that item and hit "Show" and it will take you to the app's page in Manager Applications. It also has a root function too that will allow you to see what is in /system, /cache, /data,…
Some sort of file manager to get to some things I'll mention below. (I use Root Explorer)
SOME MEMORY CLEARING TIPS AND TRICKS:
Home Launcher ~ If you have a 3rd party home launcher, see if it has the ability to long-press an icon to take you to its screen in the Manage Apps section. I use ADWex and if you long-press on say Market, it takes me to the same place as is I were to go to Settings->Applications->Manage Apps->Market. Instead of all that, just long-press on the icon and BAM! it takes you there. Here you can clear out your cache for the market or delete the data (if you need to do that). Or clear the cache of the XDA app b/c you looked at too many pix.
Browsers ~ These develop cache that takes up memory and space, especially the stock browser. If you use a 3rd party, you can get the settings to clear cache, cookies, passwords,…on exit. I use Dolphin, but I am pretty sure that most have something like this on them. (side note: most 3rd party browsers once exited will not run in the background unlike the stock one)
Media ~ So you download a bunch of mp3's from the net or click on some pix and save it to your SD card. Or maybe you just felt like wiping your card and having a fresh start. Every time you reboot, you phone will scan media. No big deal, but the more you criss-cross things from PC to phone and back again, it can create a bunch of double files in your media cache on the phone. With the proper placement of .nomedia files (this prevents your media scanner from doing just that, scanning media- i.e. pix, jpegs,…Don’t place a .nomedia in your music, album art or DCIM files**bad).
Every once in a while, I'll hit the Diskusage or go to Manage apps and clear the media cache. Then I got to my file manager and the DCIM->Thumbs and delete the .Thumbnails files (should be 2). Unmount the SD card and remount to start the media scan, pull up the Gallery and wait for the thumbs to come back (depending on how many you have, this could take awhile). By doing this you can get almost 5 mb back if you have a bunch of double scans in your media folder.
AND NOW FOR SOME TIPS THAT MOST COULD NOT KNOW:
LOSTDIR - Lets say that you have your phone plugged into your PC and for some reason you, in a fit of rage, jerk the plug out without unmounting it first. This creates a file that is put into your LOST DIR folder on your SD card. Anytime you don't safely unmount the SD card, it will create a file in that folder. In the scheme of the SD card, it isn't too much, but I don't like having useless items free floating about.
TOMBSTONES - So you are downloading an update from the market and for some reason your phone freezes and the Force Close-Retry-Wait doesn't work out for you. You have to do a battery pull. Frustrating I know and the memory takes a hit too. Every time you have to do a battery pull because of a freeze up or something of the like, it creates a TOMBSTONE file in /data. These are useless and can be deleted. If you are flashing ROMs and are constantly having to do battery pulls b/c market crashes or an app freezes, then you are creating a Tombstone file.
**Here is where your file manager (with root) will help. Go into /data and scroll all the way to the bottom and open /tombstone. There should be some files in there and depending on how many there are, I could be a nice chunk of wasted memory. Just select all and delete. They are not needed. Your internal memory should go up by doing this.
LOST & FOUND - Same scenario, but now go into /data/ cache or /cache and you'll see Dalvik-Cache (don’t mess with this), Lost & Found and Recovery. If you tried to download an app and it got frozen for some reason and had to do a battery pull, the apk will be free floating in there, uninstalled (free floating radical). You can delete this. While it isn't in the Dalvik-Cache folder, it is taking up space. Once you are able to download something completely and correctly from the market, it will populate into Dalvik-Cache correctly and won't be a free radical, as I like to say.
Change Log:
1/23/12 - Added more MIUI OC/UV settings; memory management tips, tricks, apps.
Hit this thanks button too

Useful Apps to prolong battery life
These are some apps that will help you get the most of your battery life. I will put a brief descpition of them and you can also click on their names to take you directly to their market link. Note that some of these are ROOT apps and almost all of them also have PAID versions that greatly expand their functionality. Use the free ones and see how you like them and then kick in for the PAID ones if you want. The only one that I really suggest paying for right out of the gate to get the most out of your battery is Juice Defender Plus.
Batstat Widget –
I know, I know. Above I said that widgets were nothing more that monitoring apps on your home page, but this one works great, has low memory and is very, very simple. It shows Charge in %, Volts to know when you are FULLY charged and Temperature F/C to tell you that your phone is getting hot and exactly how hot it is.
BetterBatteryStats –
This app will show you what exactly is eating at your battery. Processes, Running Services, Wakelocks, Partial Wakelocks. It is a PAID app but for XDA users it is free. See here for more extensive details, instructions, screenies, change-logs,... and credits go to Chamonix and his development team for this app.
Batter Calibrator –
When you flash a new ROM, it is always best to wipe the old battery stats associated with that ROM, so you can start fresh as a daisy. How this works is you plug you phone in and charge to 100%, do not mess with it or surf the net (I do this overnight). While still plugged in, hit the apps, grant SU permission and hit the Calibrate Battery button. Grant SU permission again and once done, unplug your phone. Your Batterystats.bin has been deleted. You running your phone down by just using it normally. Most say to run it until it shuts off, but I have had bad experiences doing this, so I let it get to 10-15% and plug it in then. Charge fully up to 100% (again no surfing or games) and you will notice a dramatic increase in battery life.
**Note that this can be done two other ways. You can boot into CWR or Custom Recovery and go to Advanced Settings and there will be the Wipe Batterystats.bin option. Or you can do it manually by going into /data/system/ and deleting the batterystats.bin in there. Any of the three methods work to get the entirely same result in the end. I just like using the app or manually myself. **
Why battery calibration is important and what it is doing.
The app and what it does is more for when you are flashing a ROM and have around 60% and then once booted up fully, you charge it up to 100%. Decided you don't like your ROM and go back to your original ROM via backup, it will show 60% instead of the 100 or 90% you had before you went back to back up b/c you backed up the batstat bin when you nandroided your original ROM.
How about this for an example:
ROM: Deranged9 70% (and you made a backup) Then went to Zendroid, charged and hit calibrate battery at 100%. Used Zendroid for a few hours and decided it wasn't your bag. Your battery is at 50%. You flash back to your Deranged ROM and you know for a fact you had 50% before you flashed back, but now once totally booted, you are showing 70%. This is why you use the battery calibrator after you flash a ROM. Gotta create a new batstat bin for you "fresh" ROM (even though it is a backup).
Recently there has been information debunking this process. I will post it below, however I know what it says, but I also know what I've seen/experienced too. Here is the post by Dianne Hackborn, a Google Dev on her G+ account.
Dianne Hackborn - Jan 12, 2012 - Public
Today's myth debunking:
"The battery indicator in the status/notification bar is a reflection of the batterystats.bin file in the data/system/ directory."
No, it does not.
This file is used to maintain, across reboots, low-level data about the kinds of operations the device and your apps are doing between battery changes. That is, it is solely used to compute the blame for battery usage shown in the "Battery Use" UI in settings.
That is, it has deeply significant things like "app X held a wake lock for 2 minutes" and "the screen was on at 60% brightness for 10 minutes."
It has no impact on the current battery level shown to you.
It has no impact on your battery life.
Deleting it is not going to do anything to make your more device more fantastic and wonderful... well, unless you have some deep hatred for seeing anything shown in the battery usage UI. And anyway, it is reset every time you unplug from power with a relatively full charge (thus why the battery usage UI data resets at that point), so this would be a much easier way to make it go away.
Click to expand...
Click to collapse
JuiceDefender (Plus) [Since I use JD+, that is what I am going to refer too.]
This app’s ability to kill Radio/Data has NO EFFECT on phone calls or messaging. You will still get that call in the middle of the night you were expecting.
If you set it to custom, the go into the settings tab on the right and then all the way at the bottom, there is two buttons to push, The first in Interactive which will pull up Juice Defender for up for any app that isn't already configured and the other is Configure Apps. This is the one that you can customize on an app-to-app basis where if you are no using an app and the screen is locked, it kills the radio/data traffic for that app.
Say you are listening to IHeartRadio, this you would want either Enable or Enable/off (which means the screen will be locked but the radio/data will be working). Now take the browser. If you are not using the browser, then you don't need it transmitting data right? So you would set that one to Enable (which means that it will only enable data traffic when that app is being used).
Juice Defender only works when the screen is locked (WidgetLocker lock screens interfere with JuiceDefender), don't forget and all widgets are battery drains b/c all they really are is a monitoring app and if it is tied to something like Facebook or Google+, then that data will be running constantly.
Settings:
Enable = Radio/data on when app is in use (front)
Enable/off = Radio/data on for background apps (when screen is locked)
Disable = Disables radio/data traffic completely when that app is running
Do Nothing = What is says
Examples:
Angry Birds = Disable (Here is a little known trick that I use for this and any game with Ads. With this and something like Adfree, no more ads in Angry Birds even though the ads are embedded in the .apk)
Pandora/Jango/ Tune-in = Enable/Off (this will keep your battery temp down when streaming)
Browser/ Market = Enable (not enable/off b/c then it will keep your radio/data open)
Beautiful Widgets = Enable/off
mClock/Clockr = Enable/off
SMS/MMS = Enable or Do Nothing (why would you push disable)
I have been using JD+ for over a year on 3 different phones and multiple ROMs and have noticed a considerable difference in battery life. Just takes some time to figure out YOUR settings and what YOU like. I have also used it on Stock kernel and had no problems either.
LBE Privacy Guard
This will go good with JuiceDefender, as they both prevent unwanted data transfer. Protect your privacy by controlling the permission of each application to access your sensitive data. Block malicious operation from Mal-wares and Trojans. Block unwanted network traffic if you don’t have a unlimited data plan. Find out which application is trying to steal your privacy by checking the security log.
RAM Munchers eat battery too. These will fix that for you.
Autostarts (paid-CAUTION this is for advanced users)
Keep control over your phone: See what applications do behind your back.
Shows you what apps run on phone startup, and what other events trigger in the background. Root users can disable unwanted autostarts and speed up their phone boot.
Watchdog
See what is eating your RAM. Hint: if it is using RAM,then probably it is also using battery too.
Spare Parts
Spare Parts allows you to enable some settings
that are not found in the default setting menu
Process Monitor
List the running process on your Android device.
Long click item to kill application or open application.
Fastboot –
This is a handy little app that kills all your services at once and lets them restart back up. I use this right before I hit the lock screen, so that if any app-services are running that I don’t have configured in Juice Defender Plus they will be killed, frees up about 50-70mb of memory, and then I lock the screen and JD takes over. This one is optional if you want it or not. I like it just fine and it works for me.
Matte Screen Filter –
Puts a sort of Dim setting on your screen. Almost like a display overlay, ok? And I did mean to rhyme those. I don’t use it because I have my display set how I want it but you can.
And might as well hit this thanks button too for the Hat Trick
Change Log:
12/22/11 - Per chamonix (BetterBatteryStats dev) took out apk and input his thread to get most updated version, stats, change log [still free for XDA users though]
1/9/12 - Took out actual APKs and put in market links. Click on the name and it will direct you to the market link for the free version that app.
1/23/12 - Added more battery apps and some RAM monitoring/killing apps.

Very helpful post, Thanks.

I was one of the people asking about this and I just wanted to thank you a ton im gonna try some stuff you suggested, mainly my widgets I have about 3 pages haha. Anyways thanks for the guide
Sent from my SGH-T959 using XDA Premium App

Also just wanted to ask a question but first thanks to your no widgets getting I get 20% more life . But to my question, does having alot of apps on a home screen eg.more pages,more apps,etc. Use more battery just like the widgets?
Sent from my SGH-T959 using XDA Premium App

sneakysnake16 said:
Also just wanted to ask a question but first thanks to your no widgets getting I get 20% more life . But to my question, does having alot of apps on a home screen eg.more pages,more apps,etc. Use more battery just like the widgets?
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
I don't think having more apps on your home screen uses more battery, but having more page does use more RAM. I use only 3 pages but I have 4 or 5 folders set up too. Games for instance has 12 games in it. Social has 3 (you know what they are).
Glad to see it is working for you. Use the apps too and if you decide to get JD+ let me know and I will help you set it up correctly.

Guide looks awesome bro!
Update: Also, thanks for including a link to my guide! Really appreciate that!
Sent from my SGH-T959 (Samsung Vibrant)

I think im gonna get it cause so far about 7 hours so so far its a 1 hour increase in life. And ok good to know as of now i only have 1 page but normally i have 3.
Sent from my SGH-T959 using XDA Premium App

Bigger Battery:
For anyone interested here's a thread on buying a larger 1800mAh battery (400mAh more then the stock batteries) that are cheap and fit nicely. Check out this thread here.
Can you imagine... The extended juice of an Epic 4G battery + Woodrube's epic guideline!? ...That would be two epic's combined to =
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I got juice defender ultimate would that help? And how do i use it if you wouldnt mind telling me. I have it set to basic
Sent from my SGH-T959 using XDA Premium App

Ill type you up something and PM you tonight or tomorrow. If you could PM me a general list of your apps, that would help.
I'm like a crack dealer. First answer is free, the second one costs you (a thanks).
Did you know that you can also hit the THANKS button from your XDA Premium app? Just tap the post.

Ok ill do that and i didnt know that ill be sure to thank you you helped me alot so far thanks for the tip
Sent from my SGH-T959 using XDA Premium App

Updated some links and a few things in post #2

Awesome, your guide is from now on "stickied"!

N00B_IN_N33D said:
Awesome, your guide is from now on "stickied"!
Click to expand...
Click to collapse
i think you need to tell me your secret haxor ways to get it stickied too.

Lol, there's no "haxor" skills needed to get a guide stickied.
Sent from my SGH-T959 (Samsung Vibrant)

I am going to be updating this sometime this weekend, so if anyone has any suggestions, let me know and I'll take a look at them. I also have found another miui kernel OC/UV set up too that I'll put in there as well.

Woodrube said:
I also have found another miui kernel OC/UV set up too that I'll put in there as well.
Click to expand...
Click to collapse
For which kernel?
Sent from my SGH-T959 (Samsung Vibrant)

It is Glitch also but the OC isn't as high as yours but the UC is fairly different especially in the lower frequencies. I think that I might put in something about memory management too but still undecided about that yet. Are you working on the new BIBLE? Talk about a monster task. Let me know it you need help and want to colabo on it. PM me your thoughts. Always here to help bro.
ps: Digging your new graphics too. You've come quite a long way.

Related

[Q] Best kernal/ROM for battery saving?

I am using JD Ultimate and even with that on aggressive/extreme I only get about 6-7 hours of battery life. Im always carrying around my charger, which is ridiculous. Considering it took 2 weeks just to root my Samsung Vibrant, im very hesitant on trying to switch to a different ROM/kernal. But the battery just sucks soooo bad!! Ive even bought a brand new battery only to get the same results. Ive also used battery calibrator and setCPU and never got more than 8-9 hours. Are there any other options im overlooking before I attempt to switch to a different ROM? My main concern is that I dont want to lose my stuff or have to reset all my settings.
Try this...
Use phone till it dies on its own, completely dead.
Charge phone completely, plus 30 minutes longer.
Unplug phone from charger
Reconnect, you'll notice it's not full, charge till it is again.
This is bump charging and NOT something you want to do often, a few times is okay, in my opinion. You could skip the bump charge if you like.
Phone remains plugged in.
Boot into recovery (volumes + power)
Advanced > wipe battery stats, reboot.
Use phone till it's literally about to shut off (or does) Charge till full + Use phone like normal.
~~~~~~~~~~​
Now, when it comes to roms it's kind of hard to say which has best battery life considering their are hundreds of roms for the vibrant floating around. But I can tell you that if you flash MIUI and then flash the Bali-CM kernel you'll get great battery life and an excellent rom! If you follow my guide it will teach you how to backup everything so you don't have to start from complete scratch and how to flash MIUI and more! Here's a link to my guide... http://forum.xda-developers.com/showthread.php?t=1307637&page=1
How do I get into the advanced area? I don't see it in recovery
It should be on the main CWR screen...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Once there click "advanced"...
Then click "Wipe Battery Stats", then select yes, click "+++++Go Back+++++" , and then click "reboot system now".
Battery Calibrator from the market does the exact same thing w/o booting into recovery. It is just in an app version. Or you could, now that you have root, go into Root Explorer or whatever file manager you have with root permission and go here /data/system/ and delete this battstatt.bin (it is just the manual way to do it).
I have tried to help you on this before and am determined to get you more that 24 hours on a single charge (unless you want me to back off). I just see your threads and know that it can be done. I'm getting outstanding battery life and you should too.
24 hours? Is that possible?
Sent from my SGH-T959 (Samsung Vibrant)
I am getting 30+ with on-line music in the mornings, XDA at lunch and Poweramp the rest of the day. Surfing on the way home from work with music playing (I take the bus, so I have plenty of time). Check XDA later on, market, Dolphin and standby overnight. Start recharge around lunchtime.
I am using Juice Defender Plus,Toxic8 ROM with Bali 1.2 kernel. I don't have FB, G+ or Twitter updates running and have JD+ set on an app-to-app basis to kill the radio/data when the screen is locked. Just because the screen is off,doesn't mean the phone is off. Radio/data running is huge battery drain.
Dude, 30+ hours!? That's crazy! I've never tried JD before, but after hearing this I'm going to give it a shot for sure. Thanks.
N00B_IN_N33D said:
Dude, 30+ hours!? That's crazy! I've never tried JD before, but after hearing this I'm going to give it a shot for sure. Thanks.
Click to expand...
Click to collapse
This is how the JD Plus works (no need for JD Ultimate b/c we don't have many of the functions it supports. I just copied this from another thread the OP started awhile ago and I was trying to helps him out there.
If you set it to custom, the go into the settings tab on the right and then all the way at the bottom, there is two buttons to push, The first in Interactive which will pull up Juice Defender for up for any app that isn't already configured and the other is Configure Apps. This is the one that you can customize on an app-to-app basis where if you are no using an app and the screen is locked, it kills the radio/data traffic for that app.
Say you are listening to IHeartRadio, this you would want either Enable or Enable/off (which means the screen will be locked but the radio/data will be working). Now take the browser. It you are not using the browser, then you don't need it transmitting data right? So you would set that one to Enable (which means that it will only enable data traffic when that app is being used).
Juice Defender only works when the screen is locked, don't forget and all widgets are battery drains b/c all they really are is a monitoring app and if it is tied to something like FB or G+, then that data will be running constantly.
Examples:
Gmail = Enable (not enable/off b/c then it will keep your radio/data open)
Beautiful Widgets = Enable/off
mClock/Clockr = Enable/off
Angry Birds = Disable (with this and something like Adfree, no more ads in Angry Birds even though the ads are embedded in the .apk)
SMS/MMS = Enable or Do Nothing (why would you push disable)
Enable = Radio/data on when app is in use (front)
Enable/off = Radio/data on for background apps (when screen is locked)
Disable = Disables radio/data traffic completely when that app is running
Do Nothing = What is says.
I have been using JD+ for over a year on 3 different phones and have noticed a considerable difference in battery life, even on a crappy Motorola phone. Just takes some time to figure out YOUR settings and what YOU like. I have also used it on Stock kernel and had no problems either.
You wouldn't believe how anxious I am to try this. You've not only exposed me to an app I've never tried before that will increase my battery life, but then gave me instructions on using it. Thanks so much. Also, can I PM you if I ever have anymore questions on this app?
N00B_IN_N33D said:
You wouldn't believe how anxious I am to try this. You've not only exposed me to an app I've never tried before that will increase my battery life, but then gave me instructions on using it. Thanks so much. Also, can I PM you if I ever have anymore questions on this app?
Click to expand...
Click to collapse
Most definately. Here to help. I used to have a bootlocked 2.1 Motorola that only had 256ram and crappy battery life. Learned all about minfree settings, battery savers and adb. We eventually hacked 2.2.1, CM6/7, Miui and built a custom recovery from scratch (CWR hijacks don't work on some Motorolas).
Woodrube said:
This is how the JD Plus works (no need for JD Ultimate b/c we don't have many of the functions it supports. I just copied this from another thread the OP started awhile ago and I was trying to helps him out there.
If you set it to custom, the go into the settings tab on the right and then all the way at the bottom, there is two buttons to push, The first in Interactive which will pull up Juice Defender for up for any app that isn't already configured and the other is Configure Apps. This is the one that you can customize on an app-to-app basis where if you are no using an app and the screen is locked, it kills the radio/data traffic for that app.
Say you are listening to IHeartRadio, this you would want either Enable or Enable/off (which means the screen will be locked but the radio/data will be working). Now take the browser. It you are not using the browser, then you don't need it transmitting data right? So you would set that one to Enable (which means that it will only enable data traffic when that app is being used).
Juice Defender only works when the screen is locked, don't forget and all widgets are battery drains b/c all they really are is a monitoring app and if it is tied to something like FB or G+, then that data will be running constantly.
Examples:
Gmail = Enable (not enable/off b/c then it will keep your radio/data open)
Beautiful Widgets = Enable/off
mClock/Clockr = Enable/off
Angry Birds = Disable (with this and something like Adfree, no more ads in Angry Birds even though the ads are embedded in the .apk)
SMS/MMS = Enable or Do Nothing (why would you push disable)
Enable = Radio/data on when app is in use (front)
Enable/off = Radio/data on for background apps (when screen is locked)
Disable = Disables radio/data traffic completely when that app is running
Do Nothing = What is says.
I have been using JD+ for over a year on 3 different phones and have noticed a considerable difference in battery life, even on a crappy Motorola phone. Just takes some time to figure out YOUR settings and what YOU like. I have also used it on Stock kernel and had no problems either.
Click to expand...
Click to collapse
Thats the settings I have using JD ultimate. I just have "keep data off" and then enabled whatever few apps I usee that need data when i need to use them.
I really would love to have 24 hours of battery life. I use battery calibrator, but im not sure thats helping. Did get a new battery last week. I have also set JD to only have data in use when i open an app that needs it, like your settings show. Ive had it like that since i bought JD a year ago.
itsLYNDZ said:
I really would love to have 24 hours of battery life. I use battery calibrator, but im not sure thats helping. Did get a new battery last week. I have also set JD to only have data in use when i open an app that needs it, like your settings show. Ive had it like that since i bought JD a year ago.
Click to expand...
Click to collapse
You only need to use Battery Calibrator once and not on every charge. I just use it when I flash a new ROM or restore an old one. What ROM are you using? Lets start there. What is your day like in terms of phone use i.e. what are you using it for and how long? If you are using heavy data/ graphics, process apps for long stretches at a time, then of course you are going to drain your battery quicker. But if you are listening to music for a stretch or playing a game for 20-30mins, then it should last longer.
Don't forget that while you are screwing with it trying to find out why you don't have good battery life, that in itself is using battery power.
You should try these
ROMs: Toxic8, Bionic, Bi-winning, Zendroid (all 2.2's)
Kernels: Bali, Immortality, Overstock.
Give them a shot and then see which is better for you. If you are on stock ROM/kernel, it won't have the tweaks that custom ones do to extend the battery life.
How about your brightness settings? I find that turning down my brightness even a little does wonders for my battery life.
Day in the life for my phone usage.
Wake up at 7 for work. Phone has been on charger all night and is fully charged. I use jd on night setting. Usually at my 10am break I check fb real quick four maybe 10 min max. All day my jd settings are set to only enable data when I open an app I have set to connect data. My display brightness is at 25%. Not on auto brightness. I have stock every thing. Took me 2 weeks to root. At noon my battery is about 70%. And I haven't touched it since 10am break. Then when I get off work is about 45 at 5PM. I still have night classes and my phone does at about 6PM.
I literally watch my battery stats drop every few mins
The thing is, in really not using my phone much thru out the day and background data its switched off with either jd our apn.
Can i flash a kernal like the Bali 1.8.8UV with the stock 2.2 ROM? Or do I need a different ROM first>
itsLYNDZ said:
Can i flash a kernal like the Bali 1.8.8UV with the stock 2.2 ROM? Or do I need a different ROM first>
Click to expand...
Click to collapse
You can flash any kernel that is a 2.2 kernal. Read the OP and you shoudl be good. I would flash Bali X 1.2 instead b/c you can overclock it if you ever want to in the future (and it is of 2.2 roms). Beware that overclocking will reduce battery drain, but really not that much. Your stock ROM and kernel are the problems with your battery imho.
I think that once you flash a new kernel, drain the battery and fully uninterupted recharge (without using it-try overnight), you will be pleasantly surprised.
Not sure why you want to stay on stock ROM b/c most the other ROMs have battery/data tweaks that will really open your eyes to the possibilities of your phone. To each their own though. Good luck and let us know how it goes.

Best apps for HTC One

I wanted to start a thread that shows some good apps for the HTC One. If you have any that are good, feel free to post them.
A couple I have that are pretty good are:
1) Wave Launcher: can add more apps to save space on pages. Can't really explain it, but look it up.
2) BetterBatteryStats: I like this app because I can see how much screen time I get from a full charge.
I'm looking for new apps for the One. If you have any I'd love to know them. Thanks
Faceniff
Google it because it's against the rules to link it. But here's my demo video of it in action:sly: It's AWESOME
http://db.tt/47TuSGHx
On a side note, you should request a mod to move this to the themes&apps section
1 advanced task killer,
2 clean master
3 doctor battery
4 alphalt 7:laugh:
atk really>>>> that was used in the 1&2 series of android phones STOP running it... It causes your phone to use more battery to restart the processes than it does save battery...
1- Power Toggles. Free Notification Toggles make it much easier to change settings vs Sense Settings Menu. I really like adding in Recent Apps shortcut as well.
2- Galaxy Pack. Battery last long enough for me to use a Live Wallpaper, and Galaxy Pack is simply one of the best with lots of options.
3- gReader.
Lux Lite dash: auto-brightness - replaces the built in brightness and actually works.
Can be tweaked to hell and back, and I really think this, more than anything will help with battery life
exparrot said:
Lux Lite dash: auto-brightness - replaces the built in brightness and actually works.
Can be tweaked to hell and back, and I really think this, more than anything will help with battery life
Click to expand...
Click to collapse
Definitely this, getting 4+ hours of on screen time makes me happy.
Thanks to Laporte for getting me on this app.

Improving YP-G1 performance without rom

Just wondering what apps I can use to improve the performance of my YPG1 US version without installing a ROM. I have installed a couple roms before but was a bit frustrated by losing certain functions and one of them actually made it slower.
Device is rooted atm but only rooted apps I think are SetCPU, AdFree, and Superuser.
I use it mainly for video and reading so I would love to be able to change the brightness from the dropdown menu. I also have a problem with XBMC crashing when I use the Navi-X program most of the time or going very very slowly when running Navi-X so would love to be able to use that, I think it has to do with ram usage even though I don't have that many background apps running.
Sportfreunde said:
Just wondering what apps I can use to improve the performance of my YPG1 US version without installing a ROM. I have installed a couple roms before but was a bit frustrated by losing certain functions and one of them actually made it slower.
Device is rooted atm but only rooted apps I think are SetCPU, AdFree, and Superuser.
I use it mainly for video and reading so I would love to be able to change the brightness from the dropdown menu. I also have a problem with XBMC crashing when I use the Navi-X program most of the time or going very very slowly when running Navi-X so would love to be able to use that, I think it has to do with ram usage even though I don't have that many background apps running.
Click to expand...
Click to collapse
Just a heads up, but have you tried REDD? It is literally a modified version of our stock rom, and you don't lose any functions.
Firstly, you can install a custom kernel if you want. It does help with performance (you get a boost in available ram), and will give you more options with setCPU. Now if you don't want to install anything then you can still setup your min frequency to at least 400 mhz, and keep max at 1000mhz on setCPU. This should keep things zippy.
Another thing you can do is change out the launcher. Many people don't realize this, but using a different launcher can vastly increase the performance of pretty much any android device. I recommend using Holo Launcher, since it is light on ram, and gives a pretty decent performance boost. However, many people love ADW Launcher https://play.google.com/store/apps/details?id=org.adw.launcher&hl=en, or Launcher Pro https://play.google.com/store/apps/details?id=com.fede.launcher&hl=en so if you haven't changed out your launcher then try that as well.
Our players have a knack for using too much ram. For some reason, it may say you don't have that many background apps running but you actually do (you just can't see them in the task manager). For me, I found an app called auto memory manager https://play.google.com/store/apps/details?id=com.lim.android.automemman&hl=en. This app is really simple to use. Basically you set a threshold for each category of apps, and once the available ram goes under that threshold it automatically frees up ram. When I was running it on REDD I almost always had 100mb-150mb free. It kept my device very smooth. I still use it on the JB roms. I had mine set like this 40, 70, 100, 120, 140, 160.
Along with auto memory manager, you can also install clean master https://play.google.com/store/apps/details?id=com.cleanmaster.mguard&hl=en, it's pretty much the ccleaner of android. It cleans up junk files that clutter up your device, and you can also set it to free up ram along with auto memory manager. It works awesome.
You say you want to still be able to hange the brightness from the dropdown? There's an app for that lol. Notification Toggle https://play.google.com/store/apps/details?id=de.j4velin.notificationToggle&hl=en, is pretty much like power toggles on other roms. I have to say it doesn't look exactly like that on GB (that's what it looks like on ics+ roms). It looks like this; You can set this up almost anyway you like and add almost any toggles you want
Hope this helps.
I think you should try an app called Greenify that is available on the Play Store. It "hibernates" apps that are not running so those apps won't run in the background and take up valuable ram or drain your precious battery. (You can pick what apps you want to hibernate)
You should try it out
Sent from my YP-G1 using xda app-developers app
Think I'm gonna install that notification toggle along with a kernel. Can anyone recommend which kernel would improve performance the most (ignore battery life).
Sportfreunde said:
Think I'm gonna install that notification toggle along with a kernel. Can anyone recommend which kernel would improve performance the most (ignore battery life).
Click to expand...
Click to collapse
To be honest they are all about the same performance wise. I went with Klin's R3 kernel, because for me Terrasilent was giving me an issue where it would boot into recovery, and wipe all my data.
You do not need to install anything in order to be able to adjust the brightness from the dropdown menu. I only know for sure that this works on the yp-g1( stock rom), and that it does not work on yp-g70. Other models I do not know about.
All you have to do is when you put your finger on the top of the screen as if pulling down the menu, just press and hold until the shade that pops up dissapears, at wich point you can slide your finger left or right to decrease or increase the brightness. Hope this helps.
AEVAREX said:
You do not need to install anything in order to be able to adjust the brightness from the dropdown menu. I only know for sure that this works on the yp-g1( stock rom), and that it does not work on yp-g70. Other models I do not know about.
All you have to do is when you put your finger on the top of the screen as if pulling down the menu, just press and hold until the shade that pops up dissapears, at wich point you can slide your finger left or right to decrease or increase the brightness. Hope this helps.
Click to expand...
Click to collapse
Wow thanks that worked. It doesn't adjust it through the full range I think but that's nice and easy, I couldn't get the toggle thing working.
Think I am gonna put a kernel in though to try and avoid Dolphin or XBMC from crashing so often.
Awesome post
Sent from my YP-GI1 using xda app-developers app

What I did to achieve decent battery life, performance, and customization on NC4 OTA

Hey guys, I just recently bought my Note 3 and it unfortunately came with NC4. Thanks to Geohot and his TowelRoot I was able to root my phone and install some minor/simple tweaks using Xposed Installer to make my Note 3 usable. Here's a step-by-step of what I did to get my phone to achieve better battery life and performance while also maintaining a decent amount of customization options without installing a full-blown ROM since SafeStrap currently has issues with the OTA NC4 update..
1. Download, install, and run TowelRoot to achieve root on the Galaxy Note 3.
2. After the reboot induced by TowelRoot, install SuperUser from the Google Play Store. You should install one of the following three: Superuser by ChainsDD, SuperSU by Chainfire, or Superuser by ClockworkMod.
You will probably get a notification when you open any of these apps: “The Superuser binary (su) must be updated.” I never bothered to update and every app that has requested root has been working fine for me. Please skip to the second post to see how to update your Superuser binaries if this notification bothers you.
3. Next, install Greenify and SetCPU. Open Greenify, select all apps, and then select hibernate. You can select whichever apps you'd like to hibernate but since this is a post about what I did, hibernate all!
4. Open up SetCPU and set your max clock-speed to 2265 and min clock-speed to 883. Check “Set on Boot” and change “interactive” to “ondemand”.
* I also set a conditional profile that is activated when my screen is turned off (max CPU 729, min CPU 300, Governor powersave). However, this causes some delay when unlocking the phone as the CPUs have to ramp-up. It is actually doing much better on standby but I know that others don’t have patience for that split-second CPU ramp-up to occur, so creating this profile is up to you.*
5. Open up your browser and go to http://repo.xposed.info/module/de.robv.android.xposed.installer. Then download de.robv.android.xposed.installer_v33_36570c.apk. Install the apk and run it. Select “Framework” and then select “Install/Update”. Allow it to install and reboot.
6. Once rebooted, open up the Xposed Installer app once again. Go to the “Download Section” and search for and install ActivityForceNewTask, Chrome New Tab (Xposed), DVFS Disabler, GravityBox [KK], Smooth System Progress Bars, Statusbar Scroll to Top, StopSwitchDelay, and YouTube AdAway.
7. After installing these modules, open up the Xposed Installer app once again and go to Modules. Make sure you activate all of the aforementioned modules you installed by checking each’s checkbox.
8. Reboot your device.
9. Open up Xposed Installer again, go to modules, select DVFS disabler, and check the box within the app that states “Disable TouchWiz DVFS”. Go back to the Modules section in Xposed Installer, select GravityBox and enable or disable any customizations that you’d like. Go back to the Modules section in Xposed Installer, select Greenify and enable Boost Mode and Keep Notifications. Go back to the Modules section in Xposed Installer, for the Smooth System Progress Bars, Statusbar Scroll to Top, StopSwitchDelay, and YouTube AdAway modules, select whatever settings you desire.
10. Reboot your device.
11. Enjoy smoother performance and somewhat better battery life.
Please let me know what you guys think if you do this!
*OPTIONAL* For those that can't stand that their SuperUser binaries are out of date, follow these instructions:
I do know that some of you are extremely anal about these things so I’ll list what you need to do in order to update the Superuser binary.
1. Download http://download.chainfire.eu/448/SuperSU/UPDATE-SuperSU-v1.99r5.zip .
2. DO NOT FLASH IT. First, unzip the file and transfer it over to /common folder and install superuser.apk.
3. Run SuperSU from the App Drawer and let the binary update. If you installed SuperSU by Chainfire earlier, disable KNOX. By flashing CWM you’ll trip KNOX.
^^any clue how the DVFS effects battery Wanam exposed has or defaulted on so I disabled it as well as dl'd the DVFS disabler stop switch and you tube add away..I'll give em a shot thanls!
Sent from my Eclipsed VZW Note 3 via XDA Premium...come to the dark side...
groovemetal81 said:
^^any clue how the DVFS effects battery Wanam exposed has or defaulted on so I disabled it as well as dl'd the DVFS disabler stop switch and you tube add away..I'll give em a shot thanls!
Sent from my Eclipsed VZW Note 3 via XDA Premium...come to the dark side...
Click to expand...
Click to collapse
I'm not sure what you meant, however, I do know that if you have DVFS disabled through Wanam you do not need to download and install DVFS disabler. DVFS disabler is more for performance rather than battery gains.
tjrocks91 said:
I'm not sure what you meant, however, I do know that if you have DVFS disabled through Wanam you do not need to download and install DVFS disabler. DVFS disabler is more for performance rather than battery gains.
Click to expand...
Click to collapse
I should proofread...lol..sorry about that I meant to ask if the DVFS can eat battery while enabled I don't know much about it..I disabled it and will check it out..sorry for the confusion..thanks!
Sent from my Eclipsed VZW Note 3 via XDA Premium...come to the dark side...
What should the I/O scheduler be set to in SetCPU for normal and your profile?
Would this work on the N900W8 model running KitKat 4.4.2 with the latest band and kernal update?
Just greenifying a few apps has helped my battery immensely. Before, I was getting terrible battery life.. burning over 3% at idle. Didnt matter if I turned off Google now, location reporting, or any of that stuff.
Now I have everythign on full bore.. syncing, location, google now, etc.. And Im getting about a 1.3% burn at idle. Probably could tune it more, but im satisified for now.
I don't understand the binary update issue. I do it on every device I have rooted directly after installing SuperSU. Never had a single problem... although, I am slightly new to the Verizon Note3 NC4 ownership.
I don't really have any battery issues or performance problems, but I'm curious to try this and see the difference. My device runs a smooth 24 hours with constant use, and I still have 60% by the time I get home.
My apps are all greenified. I use SD Maid to turn off autostart programs. I keep Bluetooth, WiFi, and Full location GPS on all the time, and play some serious games throughout the day. Maybe I have a super battery. Lol.
Im all about performance....so will update after trying this. Thanks for the detail and great post!
Got the idle burn rate down ever lower now.. greenifed everything that the app listed, turned off wifi, gps, location reporting, and google now.
Doodless said:
Would this work on the N900W8 model running KitKat 4.4.2 with the latest band and kernal update?
Click to expand...
Click to collapse
I am pretty sure this would work on the N900W8. Basically, all you need to do is acquire root to do any of this. If TowelRoot supports the N900W8, then yes, this would work for you.
JStrem said:
I don't understand the binary update issue. I do it on every device I have rooted directly after installing SuperSU. Never had a single problem... although, I am slightly new to the Verizon Note3 NC4 ownership.
I don't really have any battery issues or performance problems, but I'm curious to try this and see the difference. My device runs a smooth 24 hours with constant use, and I still have 60% by the time I get home.
My apps are all greenified. I use SD Maid to turn off autostart programs. I keep Bluetooth, WiFi, and Full location GPS on all the time, and play some serious games throughout the day. Maybe I have a super battery. Lol.
Im all about performance....so will update after trying this. Thanks for the detail and great post!
Click to expand...
Click to collapse
Hmm. I don't believe that you have such great battery life. It seems impossible. However, if somehow you are speaking the truth, I really wouldn't mess with anything.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
JStrem said:
Click to expand...
Click to collapse
Your previous statement was that you could use your phone constantly for 24 hours and still have 60% battery remaining. If you do the math, you're saying your phone would use up 40% of its battery over a period of 24 hours. That comes out to an average drain rate of 1.67%/1 hour.
In the screenshot you posted, you have 70% battery remaining after 6.5 hours of the device being on (screen time is not shown). 30% of your battery was used up in 6.5 hours, this gives you a rate of 4.615% battery drain/ 1 hour. What this means is that your battery is draining at 2.76 TIMES the rate at which you stated it drains in your previous post. After using your phone for a period of 6.5 hours, you have 70% battery remaining (or 30% used). What I am assuming you're saying is that your phone will be able to last another 17.5 hours and only use 10% of its battery, giving you 24 hours of use and 60% battery left? This is definitely not believable. I doubt you'd even be using your phone for the remaining 17.5 hours to even reach 60% battery.
I don't see any credibility in your previous post as you said you use your phone constantly. At the current rate of use or drain, your battery would be at 10% its capacity around 20 hours through the day. I don't see how you could use your phone for a period of 24 hours and still have 60% battery remaining. This doesn't make any sense.
i appreciate your write up and work but i have to ask if you are not around a plug often? i use Greenify for the 3rd party stubborn stuff and have for some time but i use the heck out of my N3 including work calls all day and playing Youtube for music in truck for kids and i plug in at night at around 30-35% after killing it all day.
what is the real world need for this? maybe camping or something or is it merely the challenge?
JStrem said:
Click to expand...
Click to collapse
fletch33 said:
i appreciate your write up and work but i have to ask if you are not around a plug often? i use Greenify for the 3rd party stubborn stuff and have for some time but i use the heck out of my N3 including work calls all day and playing Youtube for music in truck for kids and i plug in at night at around 30-35% after killing it all day.
what is the real world need for this? maybe camping or something or is it merely the challenge?
Click to expand...
Click to collapse
NC4 really ruined everything about the Note 3. My battery life was cut in half and there's just so much lag. The point of this was to improve battery life and performance by disabling DVFS, hibernating apps, and taking control of the CPU. I can't go from 7:30am-2:00am without my battery dying. I'd like to ideally have atleast a day and a half worth of battery that would allow my phone to last 18.5 hours.
Idk. I went from a 30 minute-and-dead Droid RAZR to this. I constantly game with everything on (gps, WiFi, sync, etc). To me this is impressive.
Maybe a bit over exaggerated... but it does hold nicely.
Hey greenify factory mode. I bet your battery will be better. Just hibernate it and insist it stays there and your good.
Thanks for your hard work!! : )
I went from NC2 to NC4. I could go all day get home and still have 50%. I flashed NC4 and my battery would drain without me even doing anything!! I would be at 50% by noon! The SetCPU is well worth the money. I agree with you why should my phone be running at a screaming speed when I have it in my holster? Thanks again this will allow me to use my phone instead of it using itself! ; )
tjrocks91 said:
Hey guys, I just recently bought my Note 3 and it unfortunately came with NC4. Thanks to Geohot and his TowelRoot I was able to root my phone and install some minor/simple tweaks using Xposed Installer to make my Note 3 usable. Here's a step-by-step of what I did to get my phone to achieve better battery life and performance while also maintaining a decent amount of customization options without installing a full-blown ROM since SafeStrap currently has issues with the OTA NC4 update..
1. Download, install, and run TowelRoot to achieve root on the Galaxy Note 3.
2. After the reboot induced by TowelRoot, install SuperUser from the Google Play Store. You should install one of the following three: Superuser by ChainsDD, SuperSU by Chainfire, or Superuser by ClockworkMod.
You will probably get a notification when you open any of these apps: “The Superuser binary (su) must be updated.” I never bothered to update and every app that has requested root has been working fine for me. Please skip to the second post to see how to update your Superuser binaries if this notification bothers you.
3. Next, install Greenify and SetCPU. Open Greenify, select all apps, and then select hibernate. You can select whichever apps you'd like to hibernate but since this is a post about what I did, hibernate all!
4. Open up SetCPU and set your max clock-speed to 2265 and min clock-speed to 883. Check “Set on Boot” and change “interactive” to “ondemand”.
* I also set a conditional profile that is activated when my screen is turned off (max CPU 729, min CPU 300, Governor powersave). However, this causes some delay when unlocking the phone as the CPUs have to ramp-up. It is actually doing much better on standby but I know that others don’t have patience for that split-second CPU ramp-up to occur, so creating this profile is up to you.*
5. Open up your browser and go to http://repo.xposed.info/module/de.robv.android.xposed.installer. Then download de.robv.android.xposed.installer_v33_36570c.apk. Install the apk and run it. Select “Framework” and then select “Install/Update”. Allow it to install and reboot.
6. Once rebooted, open up the Xposed Installer app once again. Go to the “Download Section” and search for and install ActivityForceNewTask, Chrome New Tab (Xposed), DVFS Disabler, GravityBox [KK], Smooth System Progress Bars, Statusbar Scroll to Top, StopSwitchDelay, and YouTube AdAway.
7. After installing these modules, open up the Xposed Installer app once again and go to Modules. Make sure you activate all of the aforementioned modules you installed by checking each’s checkbox.
8. Reboot your device.
9. Open up Xposed Installer again, go to modules, select DVFS disabler, and check the box within the app that states “Disable TouchWiz DVFS”. Go back to the Modules section in Xposed Installer, select GravityBox and enable or disable any customizations that you’d like. Go back to the Modules section in Xposed Installer, select Greenify and enable Boost Mode and Keep Notifications. Go back to the Modules section in Xposed Installer, for the Smooth System Progress Bars, Statusbar Scroll to Top, StopSwitchDelay, and YouTube AdAway modules, select whatever settings you desire.
10. Reboot your device.
11. Enjoy smoother performance and somewhat better battery life.
Please let me know what you guys think if you do this!
Click to expand...
Click to collapse
Thank you for being appreciative!
shawn01 said:
Hey greenify factory mode. I bet your battery will be better. Just hibernate it and insist it stays there and your good.
Click to expand...
Click to collapse
What does factory mode do? I hibernated it, just wondering. Thanks
Sent from my SM-N900V using Tapatalk

[Guide][WIP] G3 — Tweaks for better battery life

OK so I'm sure some of you know how to do this but others may not.
I'm trying to see what can be done to improve battery life until hopefully we get a custom recovery and custom kernels.
If any of you guys have any other tips on what you've done to improve your G3's battery usage or just anything at all that you think would benefit others please share...
** These are all assuming that your phone is rooted
I've installed SELinux Mode Changer
Spoiler
found here https://play.google.com/store/apps/details?id=com.mrbimc.selinux
I then set it Permissive and to run at Boot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel Tweaker
*Or whatever app you prefer for Kernel Tweaking*
Spoiler
https://play.google.com/store/apps/details?id=com.dsht.kerneltweaker
* Some great info on the Governors and their parameters can be found here:
https://android.googlesource.com/ke...5674e696/Documentation/cpu-freq/governors.txt
My OnDemand Governor Settings :
I've set max frequency to 1958400
Optimal_Max_Freq to 1497600
Powersave_bias to 50
Explanation of PowerSave_Bias
" powersave_bias: this parameter takes a value between 0 to 1000. It defines the percentage (times 10) value of the target frequency that will be shaved off of the target. For example, when set to 100 -- 10%, when ondemand governor would have targeted 1000 MHz, it will target 1000 MHz - (10% of 1000 MHz) = 900 MHz instead. This is set to 0 (disabled) by default."
Sampling_rate to 60000
*I'll add more changes here after I test them out for a few days.
*** See post #2 for updates to my Kernel Tweaks***
System Monitor
Spoiler
https://play.google.com/store/apps/details?id=com.cgollner.systemmonitor
To monitor my changes and verify they've been made.
** SELinux Mode Changer is needed because the phone will simply reboot after making some of these changes and whatever you've changed will go back to default.
Alternatively you can also use System Tuner found here
https://play.google.com/store/apps/details?id=ccc71.pmw
System Tuner is free where as System Monitor is not. Plus System Tuner combines the functions of both System Monitor and TricksterMod.
App Ops
Spoiler
https://play.google.com/store/apps/details?id=com.schurich.android.tools.appopsstarter
This app is actually just a shortcut to the Hidden Permission Manager.
You can manage which Permissions you want each app to have. For Example one that I often " switch off" is the " keep awake " permission.
For example I have Google Play Services Keep Awake set to OFF.
App Ops is a powerful tool which can lead to things not working properly if you don't know what you're doing. Google Play Services is fine for me to have setup this way however it may not be for you.
It's a very good tool to limit your User Apps Permissions at the very least.
Greenify
Spoiler
http://forum.xda-developers.com/showthread.php?t=2155737
Greenify hibernates your apps when they are not in use. You can use it with Xposed or without, however the features you gain through using it with Xposed makes it an even better tool. One of those features is being able to hibernate system apps. There are also options for keeping your hibernated apps notifications present.
Better Battery Stats
Spoiler
http://forum.xda-developers.com/showthread.php?t=1179809
This app allows us a fairly in depth look into what's draining our batteries the most. It also allows us to chase down Wakelocks and then we can either disable them entirely or at least use Greenify to Hibernate those apps if possible.
Lux Auto Brightness
Spoiler
http://forum.xda-developers.com/showthread.php?t=1944921
This app controls your screen brightness much better than stock does in my opinion. It also allows you to create profiles and overall just gives you more control over your screen. Obviously the screen is the biggest offender of battery drain so this app is a must have.
Deep Sleep Battery Saver
Spoiler
https://play.google.com/store/apps/details?id=com.rootuninstaller.batrsaver
DS Battery Saver will constantly put the phone into Deep Sleep Mode while the screen is off. Without a custom kernel yet for this phone I've been playing with this app again after not using it for quite some time.
The Pro version allows you to create a custom profile with time frames for Deep Sleep during the Weekdays and Weekends. Everything can be controlled from Mobile Data to Sync.
Juice Defender
Spoiler
https://play.google.com/store/apps/details?id=com.latedroid.juicedefender
Juice Defender is similar to Deep Sleep Battery Saver. You can conorol things like WiFi and Data when your screen is off and your phone is sleeping. There are quite a few options to choose from!
So if your not having the best of luck with DS Battery Saver or just want to try something different, give this a shot.
Titanium Backup
Spoiler
https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup
Titanium Backup is an extremely useful app to have! Among the various things this app can do for you the one that'll most help your battery is to Freeze or Uninstall apps on your phone called Bloat. For example anything having to do with Verizon I've either frozen or completely removed.
The less silly apps you have running and on your phone the better battery and performance you'll have.
** Ongoing List of Apps that can be frozen via Titanium can be found here
http://forum.xda-developers.com/showthread.php?p=54219261
WakeLock Detector
Spoiler
https://play.google.com/store/apps/details?id=com.uzumapps.wakelockdetector
This WakeLock Detector is very easy to use. Plus it has the option from within it to Greenify apps and it can link you to the Web with more information about the various WakeLocks your phone has.
Boot Manager
Spoiler
http://forum.xda-developers.com/showthread.php?p=45290496
This app requires Xposed. It's very simple and easy to use. Just highlight the apps you don't want to start every time your phone boots up.
If you have around 200 Apps like some people do... This could be very useful and not having all those apps loaded up in memory should save you some juice!
WiFi HotSpot On/Off Manager
Spoiler
https://play.google.com/store/apps/details?id=com.avg.wifiassist
This handy app manages your WiFi connections based on your cell tower location. It automatically will turn your WiFi on and off for. Saving you more juice. Thanks to @oo3 for this one!
** Hit The Thanks Button if I've helped you out! **
- Sent From My G3
*** Miscellaneous settings that have proven to help battery ***
LTE / CDMA
Spoiler
under Mobile Networks -> System Select instead of Global
Battery Saving Mode under Location Settings
Google Location Reporting set to OFF ( you may or may not choose to do this )
Carrier IQ Removal
Spoiler
http://forum.xda-developers.com/showthread.php?p=54220945
This guide is courtesy @adiliyo
Carrier IQ is basically just spyware!
Get rid of it, no need to have that on our phones running.
Knock On Toggle via AnyCut
Spoiler
I've created a Shortcut to enable and disable the Knock On feature. One of the various WakeLocks on this phone is the Knock On service used to either wake the phone up or to lock it. This is a fairly easy thing to do and I've only just started playing with it, but figured I'd share!
Grab AnyCut here https://play.google.com/store/apps/details?id=com.spring.bird.anycut
Then simply find Knock On and it will create a shortcut to the Knock On settings for you so you can Toggle it on and off as you please.
Auto Run Manager / ROM Toolbox
Spoiler
https://play.google.com/store/apps/details?id=com.rs.autorun
https://play.google.com/store/apps/details?id=com.jrummy.liberty.toolboxpro
We can use either App to Disable an Apps Receivers then Freeze it altogether. My screen shots here show how I did this to LIA Informant.
We can do this when simply freezing something using Titanium Backup doesn't actually stop an app from running and keeping a WakeLock. LIA Informant wasn't Hibernating even after freezing it and using Greenify. After using this method, it's no longer present.
_______________________________________________
* I'm back to using SetCPU again as I've just had the best luck with it.
Some people cannot use OnDemand Governor, due to their phones freezing and rebooting. I'm not sure what to say on that subject other than try SELinux Mode Changer and use the latest SuperSu. That's my setup and I don't have any freezes or reboots.
Of course we don't have all the control we'd like to have on these stock kernels, and it appears depending on how users have everything set up that results will obviously vary so keep that in mind.
-------------------------------------------
My Lux Profiles
Daytime
https://www.dropbox.com/s/wbfsb3761amxpev/lux_profiles.lux
[emoji2]
- Sent From My G3
Good post. Lux is amazing and seems to improve the contrast. That might be all in my head tho.
System tuner is also a good tool for changing the CPU Governor and I/O Scheduler. You can also use it to disable GTALK and Checkin services for Google Services Framework and Google Play Services. I'm getting insane battery life after rooting and applying these tweaks.
Neverender326 said:
Good post. Lux is amazing and seems to improve the contrast. That might be all in my head tho.
System tuner is also a good tool for changing the CPU Governor and I/O Scheduler. You can also use it to disable GTALK and Checkin services for Google Services Framework and Google Play Services. I'm getting insane battery life after rooting and applying these tweaks.
Click to expand...
Click to collapse
Thanks! I've downloaded System Tuner and will play around with it for a bit and possibly add in your suggestions to the OP with some screen shots.
I figured maybe this thread could serve as the spot for people to come and see what others are doing to maximize their battery life... All in one place instead of scattered around many threads.
Thanks again.
- Sent From My G3
would trickster mod work too?
oneandroidnut said:
would trickster mod work too?
Click to expand...
Click to collapse
Yes... If you look at my op it's linked right there. Works fine for me.
- Sent From My G3
Mistertac said:
Yes... If you look at my op it's linked right there. Works fine for me.
- Sent From My G3
Click to expand...
Click to collapse
awesome I used it like crazy on my note 3 but didn't think it would work on g3 yet without kernels? am I wrong?
and also what does SELinux Mode Changer do??
oneandroidnut said:
awesome I used it like crazy on my note 3 but didn't think it would work on g3 yet without kernels? am I wrong?
and also what does SELinux Mode Changer do??
Click to expand...
Click to collapse
Well I wasn't sure myself either until I tried it. I was able to make changes and they would all apply and look good however my phone would just reboot and the changes I made would be back to default.
So I tried the SELinux mode Changer and set it to Permissive and that didn't happen anymore.
Basically it changes the Kernel security from what I've gathered.
There's obviously more to it than that just I'm not a Linux pro really
Here's what SELinux is http://en.m.wikipedia.org/wiki/Security-Enhanced_Linux
- Sent From My G3
Having been away from Android for a bit, which version of App Ops are you running? It's the one app you didn't link to.
Is this (and it's associated Pro version) the business?
https://play.google.com/store/apps/details?id=droidmate.appopsinstaller
phobos512 said:
Having been away from Android for a bit, which version of App Ops are you running? It's the one app you didn't link to.
Is this (and it's associated Pro version) the business?
https://play.google.com/store/apps/details?id=droidmate.appopsinstaller
Click to expand...
Click to collapse
Sorry about that! I updated the OP with my link to App Ops.
https://play.google.com/store/apps/details?id=com.schurich.android.tools.appopsstarter
The one you linked should also do it however.
- Sent From My G3
Switching from Global to LTE/CDMA in network settings should give a little boost by turning off GSM
Wow great post !
Using BootManager, if I disable an app from executing at start, does that mean I won't get the notifications for that app?
Japultra said:
Using BootManager, if I disable an app from executing at start, does that mean I won't get the notifications for that app?
Click to expand...
Click to collapse
I'm not 100% how boot manager works with notifications. On my phone I also use Greenify with the options to keep notifications, not sure if boot manager has the same setup. Maybe you could let us know here. I'm still getting all my notifications so my guess is yes.
- Sent From My G3
Mistertac said:
I'm not 100% how boot manager works with notifications. On my phone I also use Greenify with the options to keep notifications, not sure if boot manager has the same setup. Maybe you could let us know here. I'm still getting all my notifications so my guess is yes.
- Sent From My G3
Click to expand...
Click to collapse
I'll test it out and will update this thread with my findings.
Japultra said:
I'll test it out and will update this thread with my findings.
Click to expand...
Click to collapse
Let me know what you think. There are other Xposed Modules such as MinMinLock that can limit app start ups. However that module requires you type a password every time you launch an app under its control, which I find annoying myself.
I'm also trying to see if Boot Manager truly stops the apps from being started. There are reports of it not doing so. From my end it appears to be working
- Sent From My G3
What else i can do to make the battery life do better like in this Thread:
(in the app with cpu settings there is a option to get back to defult settings?)
http://forum.xda-developers.com/showthread.php?t=2758709&page=64
Pepole here get 25-50+ hours + screen time more then 6-9 hours !!
They manage to get Great times with the battery life ,
but do not say what app they did use & what settings they changed.
or which Kernel they did use...
List of bloatware that are safe to disable on LG G3:
http://forum.xda-developers.com/ver...oatware-safe-to-disable-t2819370/post54219261
List of bloatware that are safe to disable on LG G2:
http://forum.xda-developers.com/showthread.php?t=2448848
turn off global notification
hawkswind1 said:
Switching from Global to LTE/CDMA in network settings should give a little boost by turning off GSM
Click to expand...
Click to collapse
I have tried this and I can attest that it saves some battery, however every-time I lose signal it keeps asking me to switch to global which is annoyong. is there anyway to permanently turn this pop-up off.
ps : and yes ,I know there is a check-box to say don't show till the next reboot ! what I am looking for is the notification and deleting it(freezing)
avid.aria said:
I have tried this and I can attest that it saves some battery, however every-time I lose signal it keeps asking me to switch to global which is annoyong. is there anyway to permanently turn this pop-up off.
ps : and yes ,I know there is a check-box to say don't show till the next reboot ! what I am looking for is the notification and deleting it(freezing)
Click to expand...
Click to collapse
Mine doesn't keep popping up. I just set it to LTE/CDMA and under Global roaming options mine is set to Always Allow for All Trips if that makes any difference
- Sent From My G3
Mistertac said:
Let me know what you think. There are other Xposed Modules such as MinMinLock that can limit app start ups. However that module requires you type a password every time you launch an app under its control, which I find annoying myself.
I'm also trying to see if Boot Manager truly stops the apps from being started. There are reports of it not doing so. From my end it appears to be working
- Sent From My G3
Click to expand...
Click to collapse
Notifications are working although I'm not 100% certain the apps are actually being blocked. How can I check?

Categories

Resources