[GUIDE]tuturial how to instal roms in folio wothout fastboot simple - Folio 100 General

I decided to do this tuturial because i take to many time to do someting working on my toshiba folio 100.
First you will need this recovery
Just put on external sd card and flash your folio normal (power + vol up)
then u can choose roms 2.2 2.3 and 3.1 (4.0 is to buggy yet):
best 2.3 (in my opinion)
update-cm-7.2.0-RC0-Folio100-KANG-signed.zip
ORIGINAL THREAD
best 2.2 (in my opinion) Foliomod 1.4
ORIGINAL THREAD
best 3.1 (in my opinion) Folio3xx v0.4(Honeycomb for Folio 100)
ORIGINAL THREAD
TO INSTAL IS JUST DOING THE NORMAL STEPS
WIPE DATA
WIPE CACHE
INSTAL FROM SD CARD (u can choose internal external or usb with this recovery)
and thats all simple and usefull
any question or sugestion is just ask
I DONĀ“T MAKE ANY OF THIS ROMS I JUST ORGANIZE THE ITEMS IF U LIKE PLEASE PUSH THANKS BUTTON

Related

need help to flash Atom Life by SD card

I am a newbie on flashing non-offical roms.. I did look at wiki but it seems my atom life can't go into bootloader mode (camera button + reset). Here are my questions regarding flashing cooked rom by sd card.
1. how to get Atom Life into bootloader mode so it flash the file in SD to the unit? I did tried holding the camera button then push the reset hole, after released the pin (still holding the camera button) the unit boot like normal....
2. can I use 2GB Mini SD or it have to be smaller than 1GB?
3. is the rom file should name AL1.DIO in the SD card?
many thanks
1- Bootloader: Press & hold Record (not Camera) + Reset, release Reset before release Record.
2- Ok to use SD 2G.
3- Must use Flexhex to cut 12 first byte & save as AL1.DIO into SD, put yr SD into yr phone, then enter bootloader to enjoy yr new ROM

HTC HERMES200 *TYTN* ROMM UPGRADEEE!!! help

Hello everyone i'm a noob.
i'm tryin to get information about installing a clean version of windows mobile 6.
This PDA was actually traded, so i'm not really familiar when it comes to upgrading or doing a clean installation.
Basically i'm trying to install with the leastt amount of programs included so I can have free space to run my htc faster.
Can someone give me any sort of advice how to flash this phone with a new rom that takes up less space.
THANK YOU For ur time!!!
OK, 1st thing to do is Hard SPL yourr Phone. Get Hard SPL V7 from here - http://forum.xda-developers.com/showthread.php?t=296722
THIS IS A MUST.... It helps if the flash goes bad (but does void any warranty)...
2nd thing to do is go to the wm06 forum and read about the cooked OSes available. These are ALWAYS faster than the carrier roms as the carriers always load up their roms with their own 3rd party apps... If you do want to use a carrier rom but don't want all the bloat they load it with reset before the "customisation" begins after setting up the phone after flashing.
I also prefer to use the sd card method when flashing as I believe its safer than using the pc BUT you need to Hard SPL 1st. To use sd card method to Hard SPL go to post 1160 on page 116 of the above link. Sd card method for oses is slightly different so read that post carefully.
To flash os with sd card (make sure you have >50% battery) -
1). format sd card fat32 and copy the .nbh file of the rom you want to it. Rename to "hermimg.nbh".
2). Put Hermes into bootloader (tri-colour screen) - hold Power, OK button above flywheel and reset with stylus until bootloader comes up.
3). If you formated the sd car fat32 and renamed the flash file properly the Hermes will recognise it and say to hit power button to start flash - hit power button. Wait until it says flash complete then reset with stylus.
Easy as 1, 2 and 3.
Cheers...
thanks alott m8!!!!!!!!
oops another problem they say in that thread i need .NET freamework 2.0.... how do i knw if i have it already??
cuz its 24 megabytes and i cant fit it inside the device memory.
any suggestions would be appreciated...
oh shoot...i didn't format the SD Card instead i just checked if it was fat 32 and it wass
so i ran the exe file SSPL and now its stuck at the tricolour screen so i might just soft reset it

change rom and sd

Hello everyone I want to switch from "lol 1.4" to CM7 also changing the sd ... I have copied on my PC (Windows), music, videos and images, on the sd I have nothing to copy, because I have all the applications and widgets installed on the phone memory ... what do I do to remove the "lol" by phone and switch to this ROM, and changing the sd?
p.s. sorry for my bad English.
And i have lg p500.
ilmoro94 said:
Hello everyone I want to switch from "lol 1.4" to CM7 also changing the sd ... I have copied on my PC (Windows), music, videos and images, on the sd I have nothing to copy, because I have all the applications and widgets installed on the phone memory ... what do I do to remove the "lol" by phone and switch to this ROM, and changing the sd?
p.s. sorry for my bad English.
And i have lg p500.
Click to expand...
Click to collapse
1) download a copy of the mik_os's CM7 (also gapps.zip, you will want that)
2) backup files from your phone to your pc. just to make sure ( you've already done this)
3) copy mik_os's CM7 (and gapps.zip) to your sdcard
4) reboot to recovery
5) make sure you do a nandroid backup
6) wipe everything
7) flash miks_os's CM7(then flash gapps.zip)
8) reboot
9) enjoy!
you will lose all the installed applications on your phone.. just reinstall them afterwards or use titanium backup i guess.
hope everything goes well.. have fun with gingerbread!

[Q] recovery cm7

i have optimus one running on cm7 beta 6.
i want to change my rom to either megatron or void.
however i have a few questions.Just in case the phone goes in to boot loop ,how to go to recovery again. the switch off+ vol down + menu doesnt work on cm7.and without strting the phone there is no way to go back to recovery. is there any other way to go to recovery.Also can i install roms without without partitioning SD card?? please experts help me out..also if i want to upgrade cm7 ...is it safe to flash the zip considering the boot loop that it goes into..
For recovery, shutdown phone and then keep pressing POWER DOWN KEY + VOL DOWN KEY + HOME KEY.
Yes you can, a2sd if present will be disabled automatically
Yes it is safe; if in boot loop, wipe dalvik cache, cache, data, .android secure, and flash the system debug zip posted on forum and then re-flash CM7
so if a2sd gets disabled...how can i move my apps to sd card then?
akki1791 said:
so if a2sd gets disabled...how can i move my apps to sd card then?
Click to expand...
Click to collapse
If you're using a GB based rom ( or froyo....I think ) then the in-built application movement mechanism will kick in.
However, only certain apps can be moved to sd with the above system.
If you want to move all / any apps ( including system ones ) to sd, then you have to partition your sd and install a2sd ( if not already present ). Keep in mind that you also have to use a class4 or above ( 6 recommended ) sd card.
im kinda noob...sorry if my questions are silly...
one...theres nothing written on the sd card ..so how should i know the class of my sd card?
nd is it simple to partition the sd card.
Also whenever i connect my phone to the computer...it reboots...so can i partition the sd card on the phone directly.?
How to get the custom recovery?
matthiastan5 said:
How to get the custom recovery?
Click to expand...
Click to collapse
check it in the developers threads...mentioned there..
@akki1791 :
1) Try a sd card benchmarking tool ( sorry, I don't know any as I don't use a2sd ... search market for it ) ( usually the deafult sd card that comes with p500 - 2gb - is of class 2 )
2) Yes you can partition your sd card in recovery mode ( check for option that says ext2 , etc. - using 1.2 recovery )
3) By reboot do you mean your phone reboots, then, first, while in android, goto settings and unmount sd card & format it & then mount it again, hope this solves the reboot problem. ( I think someone did experience a similar type of problem ... but, I forget where the thread is ... you'll have to check it out, sorry )
@matthiastan5 :
check this out : http://forum.xda-developers.com/showthread.php?t=901247
( Not to be rude, but, in future please check out the developers' threads ( at least ) before asking for help )

ClockWork mod & App2sd

Ok I have a rooted sga 2.3.6.
First thing I want how do I install or move all app to SD card. Many of them installed on Phone mem refuse to do so. I have heard abt some mod that makes a partition on sd card tht acts as phone mem.(Dont know much)
Second thing, do I really need ClockWork mod? I really dont care about backing up my whole system IF by simply flashing a firmware would fix it if it gets screwed. I backup Contacts and other Imp stuff on regular basis.
first make a backup of your memory card.
now install clockworkmod recovery
in recovery>advanced>partition sdcard> select ext3.
wait untill the process finish.
now reboot your device and download link2sd from market.
now u can move your apps 2 sd..
in cwm recovery we can do so many things not only backup so it is better to install..
sry for my bad english
Sent from my GT-S5830 using xda premium
Thanx for responding, Your english is good.
Can you give me the link for stable version of cwm for my phone? And how to install it?
Those big rep guys explain things in somewhat tricky way.
animal_he said:
Ok I have a rooted sga 2.3.6.
First thing I want how do I install or move all app to SD card. Many of them installed on Phone mem refuse to do so. I have heard abt some mod that makes a partition on sd card tht acts as phone mem.(Dont know much)
Second thing, do I really need ClockWork mod? I really dont care about backing up my whole system IF by simply flashing a firmware would fix it if it gets screwed. I backup Contacts and other Imp stuff on regular basis.
Click to expand...
Click to collapse
1. Yes. AFAIK, the 3 most popular tweaks (a2sd tweaks as they're known) are DT:A2SD, Link2SD and S2E. I personally use Link2SD because you can link (meaning move to ext partition in your SD card) individual apps and their respectful files. If you want, I can send a link to where I described how I managed to run it.
2. No, but it's really, really, very, extremely useful. Backing up and restoring through CWM is 100 times (no, not exaggerating) easier than via flashing through ODIN. If you stuff something up, you can just boot into CWM and restore whence your ROM was working fine before. It's literally a two-tap process.
Apart from backing up, a lot of recent ROMs for SGA require CWM 4 or 5 as a prerequisite, because those ROMs are flashed via an install script that is only compatible with CWM.
here is the link.....
http://forum.xda-developers.com/attachment.php?attachmentid=743333&d=1318051346
move this file to sdcard..
now power off your device.
now go to recoverymod( hold home + power button)
recovery > install from sdcard > now select clockworkmod recovery...
wait for process finish..now reboot
note: use volume keys to move up and down, use home button to select..
Sent from my GT-S5830 using xda premium
Thanx everybody. I have installed it, partitioned my sd card with ext2, and apart from msg "sd card was initialized after boot so reboot", everything is fine.
thanx for ur support guys.

Categories

Resources