Seen alot of blogs explaining how to update the android of Dell streak phones from AT&T and O2 but none for the Rogers with build number 7921.
Well i spent some time when i got my new phone to find out how to do it and to my surprise it was hard to find how to but easy to actually do it.
Only to follow 2 different site tutorials to get this done.
1. Follow the last part of the tutorial to get your streak to version 6601 ATT&T
after this phrase "If you just wanted to revert to O2 1.6 (build 4399) then you are done. If you are going to AT&T 1.6 (build 6601) we have to change the system so it will upgrade the the AT&T ROM."
http://forum.xda-developers.com/showthread.php?t=805112
once you got your streak to 1.6 ATT&T build 6601 you must follow a simple tutorial with interactive video and even has a video so you can make it work with your win7 X64 witch alot of tutorials don't help with.
2. Follow this part to the letter and if you have trouble they have a FAQ section and even supply all the files you need.
QDLTool Visual Tutorials (for Windows only)
http://streakdroid.com/?page_id=92
In this second part all you have to do in general is set up all your needed drivers and stuff in windows then open the program and press RUN. Just make sure you do all the steps without missing one.
No need to go through the fastboot or recovery menu in this part.
And it gives you Full US version of android 2.2 from a locked version of Rogers android 1.6.
Hope this will help my fellow Canadian Streakers
Thanks for Taking time to do this for fellow streakers
lufc said:
Thanks for Taking time to do this for fellow streakers
Click to expand...
Click to collapse
No problem. It's my first one ever so i hope i passed to hole point and helped some (dell irritated) people.
Actually, all you need is the 2nd step - QDLTool doesn't require any specific version installed on the phone.
Glad you like the visual tutorials .. let me know if theres anything I can do to improve them.
kantras said:
Actually, all you need is the 2nd step - QDLTool doesn't require any specific version installed on the phone.
Glad you like the visual tutorials .. let me know if theres anything I can do to improve them.
Click to expand...
Click to collapse
The only problem i have now is i can't seem to change or hear the notification when i go into the menu to see them.
Also i heard the gps doesn't work on some models but i haven't inserted the sim card because i'm waiting for the rebel to come in the mail but without the sim card the gps doesn't work for me.
The notifications setting and brightness are fixed in steves newest rom
Sent From My Rooted Dell Streak Using Xda App
ok i see i can upgrade to steve's 1.5.3 only thing is do i use the one with AMSS or the V2.1 baseband
I'm unlocking it with a Rebel simcard
In the guid (Beyond QDLTool) it says to use 1.5.3 + AMSS 1.5.1+. But i have read here and there that if your using the rebel simcard you have to use the No baseband one. So do i use the 1.5.3 no baseband and use the AMSS 1.5.1+ and follow all in the guide or do i juste use the 1.5.3 no baseband and skip the AMSS 1.5.1+ in the guide?
alexmoi said:
In the guid (Beyond QDLTool) it says to use 1.5.3 + AMSS 1.5.1+. But i have read here and there that if your using the rebel simcard you have to use the No baseband one. So do i use the 1.5.3 no baseband and use the AMSS 1.5.1+ and follow all in the guide or do i juste use the 1.5.3 no baseband and skip the AMSS 1.5.1+ in the guide?
Click to expand...
Click to collapse
im not 100% but i think you just need to flash the no baseband version thats it , you could ask that in the thread for that rom just to be certain
Hey...I have the rogers streak and was wondering if I update to dj steve's custom rom will i run into issues when the actual Rogers 2.2 comes out? Will I be able to put the stock version back on? I am a bit worried for warranty purposes as well...can it be brought back to stock or is it a one way ticket? Reason I ask is I also have several phones including a Rogers Acer liquid e and unfortunetly can't go back to the stock version of froyo because of some thing Acer and Rogers did in the update that recognizes the fact my phone was rooted and not running a rogers baseband or something like that...I just sold my Galaxy s because I was sick of dealing with Samsung and their issues....So from what I can tell Rogers is only releasing the froyo update in late spring and 3-4 months is crazy considering most of the other countries already have froyo on their streaks...Man Rogers is so bad for their updates...Anyways...can i temporarily update to the leaked versions or should I wait? Thanks
maek_it_happen said:
im not 100% but i think you just need to flash the no baseband version thats it , you could ask that in the thread for that rom just to be certain
Click to expand...
Click to collapse
you are correct. if you want to use the rebelsim, you HAVE TO use the no baseband version. 1.5.3 is the latest version
thanks for the great guide, I just got mine today and its already running 2.2 on 318 baseband
its true that u can qdl from any version though so I went straight from 1.6 to 2.2 prerelease then to 318 using the link in the streakdroid guide for beyond qdl
Sent from my Dell Streak using XDA App
Thanks to the OP, I updated my Rogers Streak from stock 1.6 to 2.2 to StreakDroid 1.6 yesterday!
Despite my reservations, it couldn't have been easier. I used the QDLTool to jump from 1.6 to 2.2 directly, and I then followed the additional instructions on the StreakDroid site to flash the rom. The hardest part was installing ClockworkMod Recovery prior to all that to do a rom backup. For some reason it took many tries to get it to hold, but eventually it worked.
Unfortunately I may be in the minority but I dislike the new homescreen layout. I still haven't found a way to get icons and widgets to stay close together like they did in the stock 1.6 version.
Hi guys,
I guess i have bricked the device while updating to 2.2.
As far as i know i have done nothing wrong i followed the Guide step by Step and Downgrade to AT&T firmware as the first guide in this post.
While i was running QLDtool it errored out and Turned off by itself. After since i have tried everything and the Device just Doesn't have power anymore. Pluging into wall socket is not giving anything either.
Any thoughts on this?? Any Help will be appreciated.
Archeob said:
Unfortunately I may be in the minority but I dislike the new homescreen layout. I still haven't found a way to get icons and widgets to stay close together like they did in the stock 1.6 version.
Click to expand...
Click to collapse
from what i understand, you need a launcher that can let you edit the number or rows and columns on each homescreen, im currently using launcher pro and have 8 columns and 6 rows in landscape. hope this helps as im a new user too so not sure if this is what you meant
rptw said:
from what i understand, you need a launcher that can let you edit the number or rows and columns on each homescreen, im currently using launcher pro and have 8 columns and 6 rows in landscape. hope this helps as im a new user too so not sure if this is what you meant
Click to expand...
Click to collapse
You're exactly right. I spent an hour reinstalling StreakDroid 1.6.0 with different DPI settings before giving up in frustration, but I found the settings menu for ADW the next day. I used a 6 x 6 grid and disabled automatic stretching, and that way my picture frames look perfect.
Great work on the rom guys! My Streak feels much more smooth and responsive than under stock 1.6.
Andy you shouldn't have a problem as long as you get a copy of the Update.pig you should be able to revert back.
Archeob said:
Thanks to the OP, I updated my Rogers Streak from stock 1.6 to 2.2 to StreakDroid 1.6 yesterday!
Despite my reservations, it couldn't have been easier. I used the QDLTool to jump from 1.6 to 2.2 directly, and I then followed the additional instructions on the StreakDroid site to flash the rom. The hardest part was installing ClockworkMod Recovery prior to all that to do a rom backup. For some reason it took many tries to get it to hold, but eventually it worked.
Unfortunately I may be in the minority but I dislike the new homescreen layout. I still haven't found a way to get icons and widgets to stay close together like they did in the stock 1.6 version.
Click to expand...
Click to collapse
Also check your density on the 1.6 streakdroid install. when i used us120 or denisty120- -160 they were to far apart. i also found that US180 didn't work the phone wouldn't boot. i had to use density180 vs us180 and everything is perfect. right amount of space. i installed just gingerbread stock launcher and im using the adw ex launcher its the best in my eyes.
cue_32 said:
Andy you shouldn't have a problem as long as you get a copy of the Update.pig you should be able to revert back.
Click to expand...
Click to collapse
Thanks...I still may wait though...I rooted my Acer liquid e and also just picked up a Samsung Captivate to play with and use as a back up..streak is so big...lol..nice to have a phone that fits in your pocket..... and since selling my GTi9000 i kind of missed it.....I love the streak and really don't want to void the warranty or better yet brick either...I am going to treat my captivate to the lagfix for now and maybe try gingerbread on my Liquid e...Been doing some reading and they are almost there...Still a few bugs however should not be long before they are worked out...As you probably noticed i love phones and have had like 30 phones in the last year...lol...Streak is my favorite so far...Have not touched my laptop much since i got it..Any news on when Rogers will come out with the official version of froyo? I read someone that April is the soonest? Anyone here anything else? I hope they come out with the update shortly ...otherwise I may be forced to root it...Any news would be appreciated..Cheers
umar.ranjha said:
Hi guys,
I guess i have bricked the device while updating to 2.2.
As far as i know i have done nothing wrong i followed the Guide step by Step and Downgrade to AT&T firmware as the first guide in this post.
While i was running QLDtool it errored out and Turned off by itself. After since i have tried everything and the Device just Doesn't have power anymore. Pluging into wall socket is not giving anything either.
Any thoughts on this?? Any Help will be appreciated.
Click to expand...
Click to collapse
Pull the battery out and put it back in.
If the streak looses power, it will be stuck in a power off state and plugging in the cord will do nothing.
After you reseated the battery, you should be able to charge the device again.
After it is charged, follow from where you left off.
Despite all the excellent work by Steve & the other boffins here in this forum, I continued to experience instability (a few random resets & freezes daily) on 1.5.x
I guess stability is more important than flexibility for me atm, so I'm thinking to install the official Dell 2.2 as I hope it will put an end to my woes.
Grateful if somebody could please advise me the procedure to go about the downgrade and where to find the official 2.2 package I will need. Do I have to downgrade my BB too? If so to what version?
(I originally went from stock O2 1.6 to 2.1 then to 1.5.1)
Thanks for your input.
Current status: O2 unlocked Streak running DJ_Steves V 1.5.3, baseband GAUSB1A131800-EU
Flash stock recovery then upadte stock 318
Sent from the Iphone Killer
Just to ensure I understand correctly, borijess, you saying I should flash this first: http://forum.xda-developers.com/showthread.php?t=840326
.....which will then enable me to go straight from where I am now to 318 ?
Edit: Nevermind, after some intense googling I found a step-by-step guide of exactly what I'm after right here: http://forum.pocketables.net/showthread.php?t=8285.
Thanks again borijess for having pointed me in the right direction - I wouldn't have known what to search for.
Not Android Development
Moving to General
I've been playing around a lot with the gtablet today. It came with the stock firmware and then I updated it to 3588 OTA. Afterwards I tried several roms, and ended up with a brick (magic value mismatch error), and used NVFlash to go back to stock rom.
Once I had the stock rom on I wasn't able to upgrade to 3588 OTA because I kept getting an error once it would try installing it. I tried to manually put 3588 on, and it partially worked, but I got some sort of error about installing the bootloader, but 3588 still loaded up and worked fine. So then I went ahead and installed one of the custom roms.
So my question is... how do I find out what bootloader version I have installed right now? I played around quite a bit with trying lots of stuff out, so I want to make sure I have the most recent version running.
Thanks!
finally found it
From roebeet on another forum
to check which branch you are on: Go to Settings -- About Tablet -- Tapu UI Version. If your firmware starts with "1.1", then you are on the 1.1 (old) branch. If your firmware starts with "1.2", then you are on the 1.2 (new) branch. Also an obvious difference between the two is that the 1.2 branch adds a lockscreen to the tablet.
the only way to be on 1.2 is to flash to it intentionally. 4349 was an OTA that did it automatically, but that update has been pulled. So, unless you've flashed to 4349 stock, you are on 1.1.
Newbe - want to try different Roms
qgirene said:
From roebeet on another forum
to check which branch you are on: Go to Settings -- About Tablet -- Tapu UI Version. If your firmware starts with "1.1", then you are on the 1.1 (old) branch. If your firmware starts with "1.2", then you are on the 1.2 (new) branch. Also an obvious difference between the two is that the 1.2 branch adds a lockscreen to the tablet.
Click to expand...
Click to collapse
I'm a very new user to GTab and android, I've been learning so I'm sorry if my question(s) have been answer elsewhere.
1. Thanks for the info on where to find out which bootloader. This really help, I had the same question as I'm trying to try other custom ROMS.
2. When I first got my GTab (by the way, I love it) I try to install TnT Lite 4.2.4 with no luck, so I install Vegan Tab Gingerbread edition and I had to reflash while trying to install TnT Lite again and got the Harmony edition of Gingerbread (not even sure if it is the same one, Newbe for you ). Now I have lock screen on it. According to your post that should be 1.2. bootloader. So, installing Vegan Tab 7 Harmony updated my bootloader I guess.. is that true??
3. Now I want to try CM7 with overclock Kernel, can someone give some feedback?? or should I just want for Beta of Honeycomb "Bottle of Smoke"??
Thanks all
SkyDragon8 said:
2. When I first got my GTab (by the way, I love it) I try to install TnT Lite 4.2.4 with no luck, so I install Vegan Tab Gingerbread edition and I had to reflash while trying to install TnT Lite again and got the Harmony edition of Gingerbread (not even sure if it is the same one, Newbe for you ). Now I have lock screen on it. According to your post that should be 1.2. bootloader. So, installing Vegan Tab 7 Harmony updated my bootloader I guess.. is that true??
Click to expand...
Click to collapse
I believe there is a lock screen on most ROMs whether they're 1.1 or 1.2. The obvious way to determine which version of *stock* you're on is whether or not it has a lock screen. 1.1 doesn't but 1.2 does.
The only 1.2 ROMs I'm aware of are:
Stock 4349
Brilliant Corners (what I use)
Century Eyes
Mountain Laurel
Beasty
Honeycomb (alpha build)
Thanks
Thanks for the information. I will check my G Tab when I get home tonight and look for it in the "About Tablet" in Setting..
Hello,
I planned on trying some ROMS for the 2.3 Gingerbread and already downloaded some in the Dev area of the forum. I'm currently running 2.1 in my x10i and downloaded the necessary tools for the update. However, then I connected my x10 to my PC and ran SE PC Companion hoping to get the latest drivers for FlashTool. I got a prompt that a new update that is available (which is not surprising considering I want to try 2.3) but was stomped when I saw the software number (for lack of better term).
Now, I'm hesitant on doing an update since this update might mess up my upgrade from 2.1 to 2.3. Could somebody enlighten me on what this update does?
After doing further browsing I found out that this is the baseband update for the 2.3. I don't understand tho why it doesn't come up in the search when I tried the search function of the forum.
Anyway, would it be safer for me to update through PC Companion or do a direct flash since my 2.1 is already rooted?
You want to update to Gingerbread and install custom ROM or just install custom ROM from Eclair?
I'd like a rom that's closest to the stock first before trying any custom roms since I'm just new to Android and wouldn't want to mess up my phone due to me being a noob at this.
I've already downloaded the TEAM rom & some others but would like to see how my phone works with stock then move on from there.
So you should upgrade to Android 2.3.3 first through PC Companion, try it for few days and learn how Android works. Then you can install custom ROM if you want.
I'm asking on behalf of someone else still on official OTA 1.5.
Should they upgrade to 2.1 or per my advice go as far as 1.6 Donut which was the last rock solid release from Android? It'd be best if they stayed on the stock ROM.
Current baseband is 63.18.55.06EU-6.35.06.18
I can't for the life of me work out what RUU is for what version of Android/release in the below thread so if someone can point out what's what then that would be lovely.
http://forum.xda-developers.com/showthread.php?p=4594434#post4594434
go as far as 1.6? 2.1 is the most updated stock rom for HTC Hero but are you sure they want to update to 2.1 ? the link you have shown is only for the HTC Hero Radio which isn't the Operating System and would't change much you want thishttp://shipped-roms.com/shipped/Hero/RUU_Hero_HTC_WWE_3.32.405.1_R_Radio_63.18.55.06P_6.35.15.11_release_signed.exe
That is stock 2.1 and and is better than 1.6 Dohnut but i would recommend rooting and installing Froyo 2.2 as most applications run on 2.2 and up [ not all but most new applications ]
Scythe01 said:
I'm asking on behalf of someone else still on official OTA 1.5.
Should they upgrade to 2.1 or per my advice go as far as 1.6 Donut which was the last rock solid release from Android? It'd be best if they stayed on the stock ROM.
Current baseband is 63.18.55.06EU-6.35.06.18
I can't for the life of me work out what RUU is for what version of Android/release in the below thread so if someone can point out what's what then that would be lovely.
http://forum.xda-developers.com/showthread.php?p=4594434#post4594434
Click to expand...
Click to collapse
At the moment, every android phones has been update to 2.3 ( most of them ). I think you should root your phone, unlock bootloader, flash recovery and update it . Wildheroc Rose goku 3.6 is good idea.