Hello good afternoon. First sorry if posted in the wrong place, I found another place to do it: / sorry for the second broken English, I'm using a translator: s today I tried to update my phone to a rom forum here: http://forum.xda-developers. com / showthread.php? t = 1201116 I did the whole procedure correctly over the phone just hangs on the first Sony Ericsson written and never leave it. I can not access the xrecovery to restore the backup, I can not turn off your cell phone only by the battery. have tried at all over the place, I followed several tutorials and nothing to thaw. someone please help me? I'm desperate here: (
Thanks and apologies again.
---
Potuguês:
Olá boa tarde. primeiramente desculpe se postei no lugar errado, não achei outro lugar para fazer isso :/ segundo desculpa pelo pessímo inglês, estou usando tradutor :s hoje tentei atualizar meu celular para uma rom aqui dó fórum: http://forum.xda-developers.com/showthread.php?t=1201116 fiz todo o procedimento corretamente mais o celular trava na primeira logo escrito Sony ericsson e não sai mais disso. não consigo acessar o xrecovery para restaurar o backup, não consigo desligar o celular só pela bateria. já procurei em tudo quanto é lugar, segui vários tutoriais e nada de descongelar. alguém por favor me ajude? estou desesperado aqui
Obrigado e mais uma vez desculpas.
Your device is X10 Mini PRO, right? If yes, you have to use CWM Recovery, no xRecovery.
For the fix:
First download this: http://sony-ericsson-update-service.br.uptodown.com/
Install, make the updates, turn off your device, charge it for at least 50 to 60% (if you have slow internet conection, charge it up to 100%), and then follow the instructions (they are on the program but I'll write it anyway).
1. Turn off device, pick up your micro USB cable, connect it to your PC.
2. Holding the Back Button (Right one) connect the cable to the phone, and keep holding it until the screen on the program changes and the phone LED turns green.
3. Click OK, it will erase everything on the phone, SD Card and SIM Card will keep Ok. It will download the Android to your device (may take hours, the program itself have slow download, and with a possible slow internet conection...) and then it will install it. Remove the cable, and turn on the phone. the boot will take about 10 minutes, don't worry, if you done everything right.
Congrats, your phone is fixed. Now, to install Mini CM7 Pro:
Root: You know how to do this, right?
Ok, after rooted, go to configs -> aplications -> developement -> debugging (activate it)
Then, download this: http://forum.xda-developers.com/showthread.php?t=1257701
Done this, conect your phone to the PC and DON'T MOUNT THE SD CARD. Open the .bat or .exe, I can't remember.
It will ask you two things: If your phone is rooted (press Y and ENTER) and if you already have a recovery installed (press N and ENTER). Wait. Reboot, and enter in recovery, the same way you do with xRecovery.
Go to Mount and Storage, connect your phone to the PC, press volume up hardware button and Home when you reach Mount USB Storage, press Home button, on your PC, transfer the Mini CM7 Pro .zip file to the root of your SD Card. Wait until the transfer is complete, and press Unmount (Home button)on your phone. Press back button once, go to wipe data/factory reset, confirm. Go to advanced settings, clear dalvik cache, clear battery data, go to install zip from SD Card, Home button, volume down button once, in choice zip from SD Card, home button, and navigate using volume buttons to your .zip file. Choise the ROM file and wait. When it's done, do another factory reset, clear dalvik cache again, reboot, wait. If everything was done right, you should have CM7 on your phone.
Hope it helped, don't forget to press Thanks button. (Espero ter ajudado, não se esqueça de apertar o botão de Thanks abaixo do meu post).
Use o Tradutor se precisar, boa sorte
Como você é br vou postar em português mesmo
obrigado, deu certo! me livrou de ter que mandar pra assistência (já estava tudo certo rs)
Obrigado mesmo
Aproveitando, tentei instalar outra rom e ela não passa da tela de apresentação dela, ela fica carregando.... e nada.
http://forum.xda-developers.com/showthread.php?t=1272784 tentei esse e mais uma outra que não lembro.
O que pode ser?
Cara, escreva em ingles, ou pelo menos use ctrl c + ctrl v do tradutor, é contra as regras.
Anyway, do what I said in the second half of my earlier post, use CWM, Full Wipe, Dalvik Cache Wipe, Install ROM, full wipe again and dalvik cache wipe again. Then reboot, if the boot animation keeps on loop as the usual (not the phone restarting) for about 10 min and the appear, it worked.
Any problem, just ask. If I can help, I will try to make it.
Sent using Mini CM7 Pro by Paul
Related
Translation by Google:
Hello, this is my first question.
The volume button on my phone spoiled and can not access the recovery mode, I want to know how to install the cyanogenmod 11 from odin. I performed the installation several times in the past but do not remember how to proceed. Also do not know where to download the odin and karnel.
Thank you.
Original message in Portuguese of Brazil:
Olá, esse é minha primeira pergunta.
O botão de volume do meu aparelho estragou e não consigo acessar o modo recovery, eu quero saber como fazer a instalação do cyanogenmod 11 a partir do odin. Eu realizei a instalação varias vezes no passado, mas não lembro-me de como proceder. Também não sei onde baixar o odin e o karnel.
Obrigado.
You can work around that volume button by booting into recovery using ADB commands.
Odin is here.
CM11 instructions are here
More info and CM 11 Nightlies are here. If you have more questions I would ask them on that thread.
Hope that helps.
English:
Hello, I got a s3 from a friend who broke it but can not remember what he did. The unit turns on but is in infinite boot. I found the (menu I forgot the name rs, open the vol + + home + power) that he's failed to "mount / efs". I reinstalled the stock rom by odin and trying to follow these tutorials 2 (1, 2), but the adb does not recognize the phone in time to install the cwm. I think the debugging it is not connected. When I put in download mode the binary counter shows 1 counts, official samsung. Any chance the cell phone does not have root and this count is the rom stock I put in odin ??? Does anyone know any way to do adb recognize without debugging connected ?????
Portuguese:
Olá, ganhei um s3 de um amigo que quebrou ele mas não se lembra o que fez. O aparelho liga mas fica em boot infinito. Descobri pelo (menu q esqueci o nome rs, abre pelo vol + + home + power) que ele tá com folha no "mount /efs". Reinstalei a stock rom pelo odin e to tentando seguir esses 2 tutoriais (1,2), mas o adb não reconhece o celular na hora de instalar o cwm. Acho que a depuração dele não tá ligada. Qdo boto no modo de download o contador binário mostra 1 counts, samsung official. Alguma chance do celular não ter root e essa contagem ser da stock rom q eu botei via odin??? Alguém conhece algum jeito de fzr o adb reconhecer sem a depuração ligada?????
1: www.forum.xda-developers.com/showpost.php?p=39523753&postcount=4
2: www.androidz.com.br/forum/topic/258...ailed-to-mount-efs-e-restaurando-a-pasta-efs/
Ao ligar o celular aparece apenas "No Command" .
(When turning on the phone it only appears "No Command").
Já tentei segurar botão de volume para cima, junto com botão power e nada.
(I have already tried to hold volume button up, along with power button and nothing.)
LuguiDev said:
Ao ligar o celular aparece apenas "No Command" .
(When turning on the phone it only appears "No Command").
Já tentei segurar botão de volume para cima, junto com botão power e nada.
(I have already tried to hold volume button up, along with power button and nothing.)
Click to expand...
Click to collapse
Flash firmware
No Moto E se vc segurar o botao pra cima da essa tela mesmo antes de ir para a recovery. Sugiro vc segurar o botao pra baixo para abrir o bootloader e reinstalar a stock ROM via ADB pelo PC antes de instalar qualquer ROM alternativa.
-----------------------------------
In Moto E if you hold volume up key you will get this screen before you enter recovery mode. I sugest that you hold the volume down key to enter bootload and reinstall the stock ROM before flashing any alternative ROM
Hey guys, i really need some help.
My Zenfone 4 ZE554KL, yesterday he sudendly shut down and doenst start anymore, when i turn him on he start in a bootloop, and he stays in there forever, i cant enter recovery mode either, he just bootloops, what can i do? I need my phone, :´/
Pessoal, preciso de ajuda.
Meu Zenfone 4 ZE554KL, ontem ele desligou derrepente e não quer mais ligar, quando eu tento ligar ele, ele simplesmente entra em um bootloop e fica la pra sempre, e também não consigo entrar no modo recovery, alguém me ajuda, preciso do meu celular, :´/
Tries to put into download mode and reinstalls the system..
Tenta colocar em modo de download e reinstala o sistema
It's my problem too.
ZE554kl, no unlock bootloader "CSC FASTBOOT MODE", no recovery mode...
i don't remember which version is installed, but i think is WW-16.0620.1912.23
How can i put in download mode in this model?
I have the same problem...
Someone knows a solution ?
I got a phone with this same problem too. One possible solution I looked for is flashing a raw stock rom from csc fastboot mode, but it didn't work in my device. Here's the link in case it works for any of you:
https://www.getdroidtips.com/asus-zenfone-4-stock-firmware/
Hi!
Today I unlocked bootloader and tried to root the phone. After flashing Magisk patched boot.img phone did boot but touch screen did not work. Me being silly, tried different things and right now phone doesn't boot. I can still get to bootloader and recovery. Is there any way for me to flash full stock rom to fix that?
I know I was stupid.
Hoping that somebody can help me,
mectax
Try https://support.motorola.com/uk/en/...oto-g-family/moto-g8-power/documents/MS140571 see if it helps
pamplinas said:
Try https://support.motorola.com/uk/en/...oto-g-family/moto-g8-power/documents/MS140571 see if it helps
Click to expand...
Click to collapse
Thank you very much, I'll give this a try tomorrow!
EDIT: PROBLEM SOLVED - Used Lenovo's Rescue and Smart Assistant
pamplinas said:
Try https://support.motorola.com/uk/en/...oto-g-family/moto-g8-power/documents/MS140571 see if it helps
Click to expand...
Click to collapse
Will this rescue a hard bricked device??
If the touchscreen didn't work then that usually means you flashed a different version of the kernel / signed differently. If you can get the stock boot.img and flash it...it should recover itself also.
Adge40 said:
Will this rescue a hard bricked device??
Click to expand...
Click to collapse
Any info on this please?
darko454 said:
Any info on this please?
Click to expand...
Click to collapse
Hard bricked as in no bootloader or can you get to the bootloader. If you can't get to the bootloader does a computer recognize anything in the device manager when its plugged in?
I was having issue with google services on my new phone that i got from Amazon. So I did factory reset few times but still having issue so i thought flashig might help and i used Mototola tool Rescue and smart assistant and found correct version of moto g8 power lite XT2055-2. But after flashing my phone just hard brick. No power on, not going to recover model, don't charge when plgged in and don't even recognised by laptop when i plug in. The only thing i can see when plug into laptop or power source is red tiny light whic you normally get while charging. other wise phone is dead. I tried SP flash tool but got error as soon as click download. And error is ;
ERROR: STATUS_BROM_CMD_SEND_DA_FAIL_(OxC0060003)
Can somebody please help. I did eevn used for a single day. I bought it open box like new.
coolarun1980 said:
Eu estava tendo problemas com os serviços do Google no meu novo telefone que recebi da Amazon. Então, eu fiz a redefinição de fábrica algumas vezes, mas ainda com problemas, então pensei que o flashig poderia ajudar e usei a ferramenta Mototola Rescue e o assistente inteligente e encontrei a versão correta do moto g8 power lite XT2055-2. Mas depois de piscar meu telefone apenas tijolo duro. Não liga, não vai recuperar o modelo, não carrega quando conectado e nem é reconhecido pelo laptop quando eu conecto. A única coisa que posso ver quando conecto o laptop ou a fonte de alimentação é uma pequena luz vermelha que você normalmente obter durante o carregamento. outro telefone sábio está morto. Eu tentei a ferramenta flash SP, mas recebi um erro assim que cliquei em download. E o erro é;
ERRO: STATUS_BROM_CMD_SEND_DA_FAIL_(OxC0060003)
Alguém pode por favor ajudar. Eu eevn usado por um único dia. Comprei caixa aberta como nova.
Click to expand...
Click to collapse
OLÁ AMIGO ESTOU COM O MESMO PROBLEMA MEU APARELHO É O MOTO G8 POWER NAO CONSIGO ENTRAR NO BOOTLOADER NAO CARREGA QUANDO CONECTADO NO CARREGADOR NEM O PC RECONHECE ELE NAO LIGA, VOCE CONSEGUIU RESOLVER OU ALGUEM PODE ME AJUDAR?