It looks like we have to move our discussion here, so I went ahead and started a thread.
As of now, there is root for the mediapad, but the only way to root the springboard is by flashing it with a rooted mediapad cust.img - which gives you root but loses your 4g.
So for us Springboard users, we either need root or a way to get 4g back if flashing it as a mediapad. Anybody with thoughts or leads or any know-how?
Finally,
Special room for Huawei Media Pad created,
Thanks to TS
I'm very glad,
Now i'm waiting the master in here to modified this device
cause i still newbie
Actually I Prefer The 3G More THan The 4G For Some Reason I Felt 4G Wasnt Stable Enough....So Im Enjoiying My Mediapad In 3G More Than My Springboard In 4G......
from the other thread, Rumbi wrote:
Yap, only thing you have to do is install Superuser and Busybox from Market and copy "su" from /hwcust/oversea_hk/preload/fixed/bin/ to /system/xbin (e.g. with ES File Explorer with root and r/w enabled), and you are ready to go
I've installed SU & BusyBox. I cannot move the SU file over to /system/xbin. A message tells me that I am not root.
However, when I run Root Check Basic I am told I have root.
I ran Root Check before & after I installed S7-301u V100R001C232B012(Root_version) and Root Check said I did not have root.
So the real question is, How do I really know if I have root?
*****
Actually I installed BusyBox Installer. I'm asked to pick a version to install:
1.19.3
1.19.2
1.18.5
1.18.4
1.17.1
None of these will install.
I also have the option to install a "Custom Tune" is there one? I'd gladly pay for BusyBox pro to get BusyBox running
*******
I powered off the device. Put my sdCard back in (the rooted firmware was removed from it). Then installed the SuperUser update from the market.
Ran that - it said everything was OK. Then I forced it to update - it crashed - so I force closed it. I then realized I could not run the original SuperUser app anymore.
Next, I opened up Root Explorer and was able to move the su file over to the xbin. But now BusyBox is not acting right - It said that it was having problems installing, and I'd need to reflash (or reload - I can't recall) the rom.
I'm rebooting, and going to try to install BusyBox....to be clear on which BusyBox..it's this one:
https://market.android.com/details?...t=W251bGwsMSwyLDEsInN0ZXJpY3Nvbi5idXN5Ym94Il0.
*****
Just realized in Root Explorer, to tap the little gray box at the top. After you tap it it should read "Mount R/O"
Now you can long press a folder/file and change the read/write permission.
Rumbi,
You said to r/w enabled the su file....is that check ALL the boxes?...Read, Write, Execute Special?????
IIRC, i had some problems with busybox, too. Copy the file from the attachment to /system/xbin and try the installer again.
And i said to enable r/w support for the /system folder. There are two checkboxes in ES File Explorer. First checkbox is enable root permission for ES File Explorer and second checkbox is "Mount / and /system writable".
Now you should be able to copy whatever file you want to /system/xbin. That's how i have done it. If you have any further questions, feel free to ask. I'll try to explain.
PS. You don't ne to alter file permissions of the su-binary but mine are "rwx r-x r-x".
Rumbi, how do you feel about the High resloution mode, does it slow the tablet down? Have you had a chance to use any tegra 2 devices and if so how does the mediapad with the snapdragon compare when in standerd/high-res mode?
Nothing to complain about the Hi-Res-Mode but i don't have any Tegra2-Devices to compare, sorry.
Haven't tried any games in hi-res-mode but normal usage is just fine.
Thanks. Ill try this out. When i try to install busybox it hangs first, then i force close and run again. Then i get the message about reflashing Rom. But i know i have root. I installed connectbot and ran su and got #
Heres how i got root (im away from my pc right now so i try to be as accurate as possible) :
Installed Hauwei modified rom (its the one that says "(root) " in the file name.
Installed Root explorer
Installed Superuser
Install busybox
Install Connectbot
Put my microsd back in (with the firmware AKA dloa folder removed)
I could not get root explorer to allow rw permissions until i slid the sd card out and back in whil the device was on.
Then i ran connectbot as local and typed su hit enter then superuser popped up asking fo allow connectbot to access. Hit allow an type su hit enter an you should get # This took 3 reinstalls of the firmware to work wjthout errors. The first times resulted in superuser needing to be force closed.
I also ran superuser and went into settings and updated it eventhouh its not neede. There i got a read out saying that busybox is not installed, but it does say i have root.
Sent from my HUAWEI MediaPad using xda premium
Honestly i havent noticed a big difference between high resolution an standard.
The only issue with high res is the small icons and buttons are difficult to hit sometimes
Sent from my HUAWEI MediaPad using xda premium
Do i need to unzip this file first?....
.... Nevermind... I unzipped it and put the busybox file in th system/xbin folder.
I installed busybox installer by JRummy16. This time and it worked!!!!!!!
Now its on to figuring out 4G and tryiying to use it as a phone.
What is the xml file i need to edit?
Sent from my HUAWEI MediaPad using xda premium
Good, that you have worked it out now What exactly do you want to do? To get to the hidden menu, you have to open the calculator and type: ()()2846579()()=
To edit the XML-Files, you have to extract the cust.img... But now that you have root, yo can edit whatever is available via root explorer
€dit: To get 4G working again, maybe with someone with an original Springboard (not a flashed one) can copy the folder /system/lib/. This should be possible even without root. I think it has something to do with the ril-files...
after updating my mediapad to S301uV100R001C232B012, i have problem with 2x Client (RDP client) now, few second after conecting to rdp session, is app 2X client crashing, with error 2x Client has stopped unexpectedly (process com.tux.client), is here anybody with this problem? thanks...
Rumbi said:
€dit: To get 4G working again, maybe with someone with an original Springboard (not a flashed one) can copy the folder /system/lib/. This should be possible even without root. I think it has something to do with the ril-files...
Click to expand...
Click to collapse
How about this - link
I'll look at it, thank you And these are the libs from an unmodified Springboard, aren't they?
yes indeed. I broke the silly thing, so I haven't played with it much. guess I will have to call about how to get it fixed.
knoxjon said:
How about this - link
Click to expand...
Click to collapse
Even though I have no clue of what to do with this, THANKS! I tried to open an .so file in notepad, but no luck, but I'm assuming that the geniuses here know what to do.
On an off-root topic - How do you take a screen cap? I accidentally did it yesterday while my MediaPad was lagging, but don't know how I did it.
The Hi Suite that comes with the device can do this, but require a computer and usb hooked up. Useful, but not as practical as doing it from the tablet itself.
The *.so files are a bit like drivers for the internal components. I'll try to find differences between T-Mobile and Huawei so maybe we get 4G working again.
tedbone said:
Even though I have no clue of what to do with this, THANKS! I tried to open an .so file in notepad, but no luck, but I'm assuming that the geniuses here know what to do.
On an off-root topic - How do you take a screen cap? I accidentally did it yesterday while my MediaPad was lagging, but don't know how I did it.
The Hi Suite that comes with the device can do this, but require a computer and usb hooked up. Useful, but not as practical as doing it from the tablet itself.
Click to expand...
Click to collapse
I'm not sure how to screencap. It's so easy on CM that I've gotten lazy. Plus I rarely do it. I know there are a ton of apps for that, tho. But you could probably google "gingerbread screen capture" and find a better answer. But not with gingerbread. I'm blanking on the name for this version of android.
knoxjon said:
I'm not sure how to screencap. It's so easy on CM that I've gotten lazy. Plus I rarely do it. I know there are a ton of apps for that, tho. But you could probably google "gingerbread screen capture" and find a better answer. But not with gingerbread. I'm blanking on the name for this version of android.
Click to expand...
Click to collapse
Honeycomb
I've been Googling searches like that, and end up with actual screen shots of Honeycomb os..I'll keep looking...
Tried this (from here), but no luck:
Screen capture
Android natively supports the ability to capture a screenshot by method of pressing both the power and volume-down buttons at the same time on an Android device. This native support was first included within the Android 4.0 (Ice Cream Sandwich) update, which is first seen on the Galaxy Nexus smartphone.[86] Previously, Android did not feature native support for screen capturing which would have likely been due to security concerns. Furthermore, prior manufacturer and third-party customizations as well as using a PC connection (DDMS developer's tool) were the only known methods of capturing a screenshot on Android.
I've looked through the *.so files and many of them are exactly the same, but some are different. One file caught my interest. I've attached it here for anyone who wants to try. Please only use it, if you have a T-Mobile Springboard with flashed root Firmware. Copy the content of the zip-file to /system/lib and overwrite the existing file. But make a backup first! After copying you have to set the correct file permission (rw- r-- r--) and reboot the tab. Hopefully 4G works again with this little trick.
Related
I installed Z4 mod and ran it and it says my g-tab is rooted. I have read that custom ROMS are pre-rooted. In my limited linux experience - being root gives you total control over the machine. I ran Terminal Emulator and cd / to get me to the top of the file structure. I tried to mkdir test and I was denied because the file system is read only. Next I went into the system folder because a lot of stuff in there looks familiar. I again tried mkdir test and was denied because the file system is read only. It would seem that to be root I would need a password and Z4 didn't offer to give me one or let me set it. Thinking further, I wonder if the file system is mounted for read only and that is why I can't create a new directory. When I am running the rom (Vegan) I can write there (understanding that I am writing to the sdcard that is mounted - presumably with RW access. So, what is all this rooting talk about then? What is the purpose of being root if you still do not have access to the file system?
You need Superuser.apk, as well. Think of Superuser as similar to Windows UAC, and rooting as making yourself an administrator. Even though you have root (admin) access, UAC (Supeuser.apk) still needs to let you through.
You also need "root aware" apps. Perfect example is Titanium Backup and that's usually my "litmus test" for verifying if I really have root or not on a device.
yup, in my limited rooting experience (droid1 and gtablet), after the process, there was always a new icon in the app tray entitled "superuser". i didnt have to install it separately, it showed up after the rooting process. if you don't have the superuser app, im betting the root process was unsuccessful.
my memory tells me i had some problems with z4root rooting my tablet, and i had to do it a few times before it actually worked. that was back in december tho, so i dont know if the current version of z4 is different than the one i used, and if so, if kinks were worked out...
so yeah, i probably helped none.
I always though z4root and Superuser were kind of a package deal.
I use them on my Cowon D3, as Cowon completely locks down their recovery process. boo to that.
rodzero,
With z4root you install it first. Then, you install a file manager program like "Root
Explorer" and when it comes up you click to "Allow" it. After that, you can go in
through Root Explorer and create and change R/O to R/W as needed. Same same
with Titanium Backup, once you have "allowed" it you can do what you need
to with the program.
Rev
More Investigation.
Thanks for the fast responses! I do have Superuser installed and it pops up from time to time when an app wants su access. Using terminal emulator, I worked my way into and what do I find but su! I ran su and got was granted su rights in the terminal. I felt pretty smug so I headed into the etc folder thinking I would make a simple change to the hosts file just to see if I could do it. I'm used to using nano in Ubuntu but no nano here. I tried vi (which I really don't know how to use) and I got some strange display but I don't think it was an editor. So, for the sake of closing the loop - if I wanted to edit the hosts file and add a new host - how would I do it. The Terminal Emulator now seems to be in the list to be granted su whenever I type it in. I know how to move around the file system. What kind of text editor would I invoke to actually alter the file? OK.... I went and downloaded TED and worked my way back to the hosts file, added a line but TED doesn't have su rights to save the file. So it looks like su exists but I don't see how to run an app in su mode except for terminal where I can invoke it by a text command. What's the missing piece to get TED to ask for su access?
Just a guess, but TED need to ask for elevation of privileges. It's probably an app issue.
Coming soon: Full access to the 2.x market.
Progress is being made to bring the new market to the NC (less the FC permissions or APK signature issues.) Check posts towards the end of this thread for more info.
UPDATE - Version 1.1a - 4/27 - NOW WITH MORE ROOT!
I'm happy to announce that I now have a much improved version of apk-enabler all packaged up and ready to install. This version will work much better than the last one, and should provide much better application compatibility.
Version 1.1a:
Major update...
* Added Edify code to clean up old versions before installing or re-installing (either version)
* Updated su (version 2.3.6.1 - thanks dascud)
* Updated and relocated Superuser.apk (now lives in /data/app so updates will not complian about it being a "system application" anymore.)
* Added Zeam 2.9.2 to /data/app
* Added NookColorTools to /data/app
* Added SoftKeys 3.06 to /data/app (in case anyone needs this - some apps don't display the nook status bar properly.)
* Added latest busybox binary to /system/bin
* Added a crapload of symlinks to busybox functions in /system/xbin. Almost everything works now (grep, mount, etc) without having to run through busybox or toolbox. (thanks RileyGrant)
* I have attempted to perma-enable adb by setting the adb_enabled value in /data/data/com.android.providers.settings/databases/settings.db. Unfortunately it appears that this setting is ignored - at least when auto mounting is enabled. See notes below.
Notes:
Now that we have busybox and a current version of su, we now have what resembles a "normal" android shell environment. More apps should work with the updates, and we can now get a shell (then su) via adb. You can also run the Android Termainl app and su from there.
Also, since Zeam and SoftKeys now baked in, the first boot will now ask for your preference of default launchers (Home, SoftKeys, or Zeam.)
To get ADB working, you need to update your drivers, and play with settings in NookColorTools (development section) to enable USB debugging.
I have validated this install via a fresh install and over-top of existing installs. The only requirement is that the Nook has been turned on and registered. You can flash this over older versions, the script cleans up cruft from prior runs before installation.
Original Post:
So I went about fooling around with the stock 1.2 ROM, and like many I was frustrated by the lack of certain apps in the Nook app store. So here's a little work-around until we get a properly rooted solution in place:
What this hack does:
* Updates the SQLite Settings Database (data/data/com.android.providers.settings/databases/settings.db) with a hacked version, enabling the install_non_market_apps and adb_enabled settings.
* Installs a version of "su" in /bin and /xbin.
* Installs busybox to /system/bin and sets symlinks for most shell commands in /system/xbin
* Installs SuperUser.apk, SoftKeys_3.06.apk, NookColorTools_0.2.apk, and zeam-2.9.2.apk to /data/app (you may uninstall any of these if you wish.)
* With these in place, the stock browser (and other Market apps) are fully capable of downloading, launching, and installing .apk files of your choosing.
Is this safe? What if I brick my Nook?
The Nook Color bootloader will boot anything you throw at it. There are no signature checks anywhere, and even their own code is signed using test keys. If you get a bad flash or whatever, you can always boot your Clockwork SD card and restore from there. Remember - this is not a phone - there is no subsidy or baseband to protect. So, no there's no S-ON, locked boot loader, or any of that other silly crap the carriers do to screw their customers. You can flash forwards, backwards, sideways, whatever you want, as long as you can put it on an SD card.
Overall, this is no more dangerous than running a stock android device with the "Unknown Sources" setting enabled. Nothing is happening yet that is uncharacteristic of a "standard", vanilla android device.
That said, you should probably make a backup while you are running Clockwork, just to be on the extra-safe-side.
So, is this a full ROM that I can use to flash the 1.2 update?
No. This is a stand-alone update to 1.2 that overwrites one file and adds two others. You need to have 1.2 up and running in order to use this.
How to install...
First, you must have a microSD card already flashed with ClockworkMod. I'm not getting into that, you can find a good guide in this post:
http://forum.xda-developers.com/showthread.php?t=987735
(thanks fpga_guy)
NOTE - THIS WILL ERASE YOUR SD CARD - SO YOU MIGHT WANT TO PICK UP A CHEAP 2GB CARD FOR THIS.
* Once you have Clockwork set up, drop the attached zip in the root directory, and reboot your Nook Color. Once Clockwork is booted:
* Select "install zip from sdcard", then "choose zip from sdcard"
* Select "Yes - Install apk-enabler-1-1a-signed.zip". The install process will begin promptly.
* Once flashed, you will be prompted to Reboot,
* The Nook OS will almost certainly crash on the first reboot - I'm not sure why as of yet... If it does, hold the power button until the Nook powers off completely, then turn it back on. It should continue to boot normally after this point.
* Once you are back up, you can use the browser to download and run .APK files from anywhere. Some apps do not work, others do. Fortunately for us, Superuser.apk is one that does
As for launchers, you will not see your installed apps in the Extras area of the stock launcher - B&N is doing something shady here... Instead, you will need to install another Launcher. Zeam seems to work well, while ADW doesn't.
Once Zeam is installed, you can hit the "Home" button and select it as your Launcher (permanantly, if you like...) This is where you'll see all of your downloaded apps.
I have attached the flashable zip file, plus links to SuperUser.apk and Zeam. Use the built-in Nook browser to install both of these to your device. Once you download an APK file, tap the notificaiton in the lower left corner and select "Package Installer." The usual Android install screen will appear, and you know what to do from there...
What's not working?
Probably lots of things. I know ADW doesn't work, and the open source Terminal emulator doesn't either... Superuser.apk detects SU, which is a good thing. It isn't "full root access" until I hack /etc/fstab to mount /system r/w (probably tomorrow.) B&N hacked up the frameworks pretty bad for this, so there are probably lots of issues with non-market apps. However, this should open the door to someone willing to port Nookie Froyo (or something similar) over to the stock 1.2 ROM.
Credit where credit is due:
First, thanks to everyone on XDA, the official Nook forum, CyanogenMod, NookDevs, some kind folks on IRC who helped me sort out the partition layout, some helpful folks in this thread, and probably 20 others that I'm forgetting. This would not have been possible without your help.
Where do we go from here?
I suspect we will have something more like Autonooter in a day or so... However, this is a fully usable solution for the time being. You have su, busybox, Superuser, SoftKeys, and a Launcher.
Also, someone needs to look into getting side-loaded apps onto the home-screen and/or into the Extras screen. My fear is that B&N is checking signatures there - but hopefully I'm wrong on that one....
Version 1.1a: apk-enabler-1-1a-signed.zip (1.28mb)
md5sum: 65267cf3314d7fae829881970d70b444
http://www.mediafire.com/?bb7o66282bqfp6q
Apps known to work:
Superuser
Zeam
SoftKeys
Amazon App Store for Android (works beautifully)
Amazon Mobile
Collapse (today's free game on Amazon)
Kindle Reader
File Manager
ES file explorer
Pulse (with widgets)
Facebook
Evernote
Remember The Milk
Subsonic
WP Clock - Live Wallpapers are enabled by default - the Google Maps and WP Clock live wallpapers appear in the stock Nook Home settings
Free Dictionary
TV.com
TuneIn Radio
Winamp
LastPass
Xmarks
Dolphin
DocumentsToGo
cVolume
FancyWidget
Google Voice
ReadItLater
Button Savior
Dropbox
Adobe Reader
TerminalEmulator
Apps known not to work:
Any version of GApps. Especially those packaged for Gingerbread. This is a B&N issue.
ADWLauncher
aldiko (via kingsjack)
other Input Method (via kingsjack)
appmonster (via kingsjack)
gscript lite (via kingsjack)
GApps don't work because framework.jar needs to be ported from another release. B&N broke it.
Alternative keyboards and things like that will probably break (again, due to dependancies that have been broken by B&N.)
Fortunately, B&N left enough of the package installer intact to allow us to get this far.
(feel free to add to this list, I'll only test what I personally plan to use.)
Thanks for getting off market working
Sent from my SPH-M910 using XDA App
Zero to sixty in no time flat. Gracias Senor, now I can dual boot this and the incredibly speedy cm7 builds and have the best eReader on the market and a super great 7 inch tablet to boot.
can i use cm gapps-gb-20110307-signed in stock 1.2 after root?
kingsjack said:
can i use cm gapps-gb-20110307-signed in stock 1.2 after root?
Click to expand...
Click to collapse
No, that's the Gingerbread version. If you can find one for Froyo - who knows, it might just work
HamNCheese said:
No, that's the Gingerbread version. If you can find one for Froyo - who knows, it might just work
Click to expand...
Click to collapse
thank! now i cna install most apk in my nc.
but ... when i use root.explorer, i find superuser isn't work.. didn't root in my nc.
1. install apk.enabler.zip by ClockworkMod, is work. i can install apk by brower
2. install Superuser and zeam & rootexplorer, is work, and i can use rootexplorer to install other apk, but haven't root.
kingsjack said:
thank! now i cna install most apk in my nc.
but ... when i use root.explorer, i find superuser isn't work.. didn't root in my nc.
1. install apk.enabler.zip by ClockworkMod, is work. i can install apk by brower
2. install Superuser and zeam & rootexplorer, is work, and i can use rootexplorer to install other apk, but haven't root.
Click to expand...
Click to collapse
You're welcome. I'll look into Root Explorer - I'm not sure if it's a root issue or an issue with that software. Superuser thinks it has root, so I would think other apps would as well.
FYI /system is not mounted as read/write yet - perhaps that is what Root Explorer is complaining about?
HamNCheese said:
You're welcome. I'll look into Root Explorer - I'm not sure if it's a root issue or an issue with that software. Superuser thinks it has root, so I would think other apps would as well.
FYI /system is not mounted as read/write yet - perhaps that is what Root Explorer is complaining about?
Click to expand...
Click to collapse
without this Options
kingsjack said:
without this Options
Click to expand...
Click to collapse
Right. As I mentioned, I need to fix fstab to mount everything with read/write permissions (which I plan to do tomorrow.) This is really more of a work-around to get apps on the device. We will gain better control of it over time.
HamNCheese said:
Right. As I mentioned, I need to fix fstab to mount everything with read/write permissions (which I plan to do tomorrow.) This is really more of a work-around to get apps on the device. We will gain better control of it over time.
Click to expand...
Click to collapse
thank u work
I'm guessing, very much likely, that you didn't include a Superuser.apk into /system/app which allows Root Explorer to request use of su in xbin. I'm going to try and get an AN version going for 1.2 in a day or two.
GabrialDestruir said:
I'm guessing, very much likely, that you didn't include a Superuser.apk into /system/app which allows Root Explorer to request use of su in xbin. I'm going to try and get an AN version going for 1.2 in a day or two.
Click to expand...
Click to collapse
I didn't include it because it wasn't necessary. su is present, Superuser in apk form works. The only thing missing is to re-mount everything as rwxrwx---. That would satisfy the root explorer requirement without having to go the full autonooter route. For now, anwyay....
What you describe is simply a tweak to /etc/fsatb and possibly some changes here and there in some init scripts. It shouldn't be a difficult update, re-mounting file-systems isn't exactly the hardest thing to do in Linux.
The big headline here is "load apps from untrusted sources" - something that the Nook Color is physically incapable of doing out-of-the-box. In fact, their plan is exactly the opposite. Entangle the user with app purchases that they can't get anywhere else, and cannot transfer in or out of the Nook ecosystem. That problem is solved for now, and it should do what 90% of users want right out of the box.
We can discuss the next phase after evaluating the changes to frameworks and whatnot that will get Gapps and other crucial stuff up and running - that will prove to be a more difficult task than simply breaking in to the stock system. Judging by work that was done for previous iterations of Autonooter, there are enough framework changes that it's going to take some time to work out the details.
BTW, if anyone on that team would like to share information, please contact me and I'll see what I can do to help.
If there's no R/w toggle it means somethings wrong with Root Explorer, you should look into that problem as opposed to just fixing it by remounting system in init.rc this is not a good fix for something like this and shouldn't be acceptable. There's a reason the toggles built in and that's to help protect the /system folder.
GabrialDestruir said:
If there's no R/w toggle it means somethings wrong with Root Explorer, you should look into that problem as opposed to just fixing it by remounting system in init.rc this is not a good fix for something like this and shouldn't be acceptable. There's a reason the toggles built in and that's to help protect the /system folder.
Click to expand...
Click to collapse
Hmmmmm.....guess I'll have to spring for root explorer and dig through logcat to see what's going on. It could totally be some goofy B&N thing that's screwey on this one device. More after the break....
HamNCheese said:
Apps known to work:
Superuser
Zeam
Amazon App Store for Android (works beautifully)
Amazon Mobile
Collapse (today's free game on Amazon)
Kindle Reader
File Manager
Apps known not to work:
ADWLauncher
TerminalEmulator
(feel free to add to this list, I'll only test what I personally plan to use.)
Click to expand...
Click to collapse
Please explain how you got amazon appstore on there. I signed in on mazon had it send me the link on the nook to download it which i did. When i clicked on it brought up chice to run with app installer or package installer of which one gave me a parse error and the other did nothing.
Any ideas?
So, is this a full rom that I can flash my 1.1 nook into 1.2?
HamNCheese said:
BTW, if anyone on that team would like to share information, please contact me and I'll see what I can do to help.
Click to expand...
Click to collapse
Hint.. They already have in this thread.
HamNCheese said:
I didn't include it because it wasn't necessary. su is present, Superuser in apk form works. The only thing missing is to re-mount everything as rwxrwx---. That would satisfy the root explorer requirement without having to go the full autonooter route. For now, anwyay....[/B][/B][/I]
Click to expand...
Click to collapse
installing rom manager and running fix permissions should set all the right files to rwxrwx--- shouldnt it? i havent installed the update cuz im happy with cm7 so i cant test it..
Sent from my NookColor using Tapatalk
Good work Ham. The apps used to show after rebooting under the Extras section(Now called Apps), they are not now after the framework butchering they did. However, I installed Applanet and all I had to do was a search on the device and there it was. It launched fine and downloaded apps no issue.
here's asus's version of the browser apk.
you get the thumbscrolling and working labs.
you lose being able to back page from a flash site (takes about 4-6 quick backs to go back) and you lose some ua strings. only tablet, desktop and mobile-phone are available, so since you can't pick ipad some html5 sites won't stream right since they haven't added android tablet recognition.
back up your browser and browser.odex files.
would it be possible to come up with our own custom browser when source is released?
why dont you just use the one from your tablet?
G1_enthusiast said:
why dont you just use the one from your tablet?
Click to expand...
Click to collapse
missing labs option so no quick controls for those who may want it and missing thumb scroll bar.
No offense but you might wanna return your tablet then.. Which version do you have and why would you wanna lose those features??? Just saying..
Those are very nice features but not worth keeping a transformer or xoom over the tab 10.1.
I'm wondering though now that I'm rooted if I can just use this to replace the stock browser completely.
Woohooooo. Replaced the stock browser that came with it and installed this one into the system/app folder. Working great... man I missed my thumb controls. Moreso because of the fullscreen mode...I hated how the address bar took up so much real estate.
Nice!!! Congrats!! I'm glad it all worked out..
jaybizza said:
No offense but you might wanna return your tablet then.. Which version do you have and why would you wanna lose those features??? Just saying..
Click to expand...
Click to collapse
never said what features i want or don't want. what this is is an option for those who might want... options maybe.
What is the best way to go about installing this ?
@madsquabbles: If you have enough patience to read and write Dalvik bytecode, you can make your own mods to the Honeycomb browser today. I modded my Galaxy Tab 10.1's browser to use Duck Duck Go instead of Google as default search, and it works fine. (For the patch and helper scripts, see github/Sakurina/mitsuki. I'd link, but not enough posts for that yet.)
@xManMythLegend: Back up the browser, uninstall the browser using the commands from CyanogenMod's wiki (the "Make a barebones system" page linked on the front page), and then installing the apk should work via adb. If you don't uninstall the browser beforehand, you'll run into an inconsistent certificates error message.
The downside is that using a custom browser breaks delta updates such as the 3.1 update; it tries to modify the browser, can't find it, and bails out.
Thanks. Without root wasn't sure ...it'd been awhile
Sakurina said:
@madsquabbles: If you have enough patience to read and write Dalvik bytecode, you can make your own mods to the Honeycomb browser today. I modded my Galaxy Tab 10.1's browser to use Duck Duck Go instead of Google as default search, and it works fine. (For the patch and helper scripts, see github/Sakurina/mitsuki. I'd link, but not enough posts for that yet.)
Click to expand...
Click to collapse
being that i want to make sure i stay rooted i'll only upgrade via custom roms or after root is found.
but thanks for the tip. i'd have quite a bit of learning to do in order to start playing with the code. maybe i'll dig around for the heck of it and see what samsung did to fix the back page button for flash sites.
i've got the xoom apk and gonna try that tonight and see what it offers.
madsquabbles said:
i've got the xoom apk and gonna try that tonight and see what it offers.
Click to expand...
Click to collapse
Please report back. Want to have best browsing option, this one seems to be 3 steps forward one step back.
Sakurina said:
@madsquabbles: If you have enough patience to read and write Dalvik bytecode, you can make your own mods to the Honeycomb browser today. I modded my Galaxy Tab 10.1's browser to use Duck Duck Go instead of Google as default search, and it works fine. (For the patch and helper scripts, see github/Sakurina/mitsuki. I'd link, but not enough posts for that yet.)
@xManMythLegend: Back up the browser, uninstall the browser using the commands from CyanogenMod's wiki (the "Make a barebones system" page linked on the front page), and then installing the apk should work via adb. If you don't uninstall the browser beforehand, you'll run into an inconsistent certificates error message.
The downside is that using a custom browser breaks delta updates such as the 3.1 update; it tries to modify the browser, can't find it, and bails out.
Click to expand...
Click to collapse
Cant install this. Tried adb and terminal both telling me read only.
ADB finds device adb shell doesnt respond to remount
terminal just says read only file when i try to remove.+
Rooted earlier today , updated sdk. Any thoughts ?
i believe you have to type "adb remount" first then you can write to the system.
i use root explorer b/c is easier for and i don't have to use a pc.
here's the link for the xoom browser. i didn't get a chance to try it out yesterday.
http://forum.xda-developers.com/showpost.php?p=14691456&postcount=4
madsquabbles said:
i believe you have to type "adb remount" first then you can write to the system.
i use root explorer b/c is easier for and i don't have to use a pc.
here's the link for the xoom browser. i didn't get a chance to try it out yesterday.
http://forum.xda-developers.com/showpost.php?p=14691456&postcount=4
Click to expand...
Click to collapse
I have not tried adb for quite some time so perhaps there is a problem with commands or the order I am trying. It always finds the device. Adb shell starts fine but fails on remount.
Root explorer also gave me read only but I was trying to replace the apk as I failed to uninstall per cyanogen wiki.
you have to click the r/o r/w button at the top in root expl (if this doesn't work then you're either not rooted, haven't installed su, or haven't given root expl su permissions). then rename your browser.apk to browser.apk.bak (or whatever) and same with the browser.odex. it's probably safer to back them up to you pc too.
then copy over the other browser.apk and fix the permissions.. forgot what it is, but it has to be the same as all the other apks 644 i think. reboot and launch the browser.
madsquabbles said:
you have to click the r/o r/w button at the top in root expl (if this doesn't work then you're either not rooted, haven't installed su, or haven't given root expl su permissions). then rename your browser.apk to browser.apk.bak (or whatever) and same with the browser.odex. it's probably safer to back them up to you pc too.
then copy over the other browser.apk and fix the permissions.. forgot what it is, but it has to be the same as all the other apks 644 i think. reboot and launch the browser.
Click to expand...
Click to collapse
Thank you. Got it working with root explorer.
Had to look up what 644 was.
http://www.droidforums.net/forum/at...-new-cyanogen-jrummy-ultimate-permissions.png
That pic helped.
Does anyone have any information on rooting the AZPEN A701 Tablet (ICS OS)?
All my searches keep popping up for the Acer Iconia A701.
drivers
I found the correct address for the drivers for this tablet, and 2 others from Azpen.
www.mediafire.com/azpensupport
The links on their webpage incorrectly spell mediafire and also include .com in the last part of the link.
Note: I recently got an email from Azpen telling me the exact same url that I had already figured out. Their email is about week to a week and a half after I sent them a request for the proper address. Also, as of the time I am posting this update, they have not corrected the address on their website.
Tried methods
I have tried SuperOneClick which reports that the system is rooted, but ADB Wireless says it is not.
I have tried Bin4ry's Root Many Android! (options 1, 3, and G) and briefly got temp root on option 3 but I lose wireless functionality (I get one or the other message from ADB Wireless (no root or no wireless), verified that Wireless connection has been turned off and won't turn back on until reboot which loses me the root again).
Retries
Ok, finally rooted the Azpen A701.
What I did:
First, I went back to SuperOneClick, and choose Unroot to reverse anything it did.
Retried Bin4ry's Root Many Android! v31, option 1 (new standard method), test, failed, unroot, 3 (old method), test, failed, unroot, then G (Google Glass method), test, WORKED this time.
Verified by using a root browser (can see files/folders(subdirectories) in /data after giving permission), a root checker (note: do not turn on SuperUser's Autoanswer, gives false information from some checkers), and ADB Wireless works while in range of a wireless router/source.
I am guessing that somehow the leftovers from SuperOneClick were affecting my results with Bin4ry's collected scripts.
Props to all that developed each of those programs and scripts.
I don't know if anyone will be seeing this but I hope it helps anyone needing the info.
Just curious to know if there is a rom available in case this method bricks the tablet? I bought this tablet a couple of weeks ago because I wanted to mess with one and I didn't have a lot of cash to spend. I use it daily and my kids play games on it. I can't afford to get another anytime soon, however I'd like to have it rooted so that I can remove factory installed apps that I don't want or need.
no idea
BizarreMan said:
Just curious to know if there is a rom available in case this method bricks the tablet? I bought this tablet a couple of weeks ago because I wanted to mess with one and I didn't have a lot of cash to spend. I use it daily and my kids play games on it. I can't afford to get another anytime soon, however I'd like to have it rooted so that I can remove factory installed apps that I don't want or need.
Click to expand...
Click to collapse
I have absolutely no idea. The only additional rom I have seen ANYWHERE is the Jellybean update for it (see driver link above). This seems to not be a very popular tablet to work with, going by the fact I received no help from anyone here. All research on this so far has been done by me. I stumbled on to Bin4ry's rooting method by accident. I'm not a ROMer, I don't know how to build one. Also I don't know which ROM backup method to use on it/will work with it.
Alright
I'll give it a shot during the weekend, I've grabbed the jelly bean update (thanks for the link). Hopefully all goes well. I figured there would be little to no support for this device, however due to a tight budget I chose to get this tablet.
I don't really mind the lack of support, however I'd like to have root because like on my old phone I had a few programs I used that required root.
Thanks again.
*Edit*
I attempted last night as I had free time to do the root method and unfortunately it did not work on my device. Not sure why it did not work. I'll try it again at a later time when I can. I also attempted to upgrade to 4.2 but it seems as though I am having issues with it as well.
Maybe I'm just stuck with the tablet as is
trying again...
BizarreMan said:
I'll give it a shot during the weekend, I've grabbed the jelly bean update (thanks for the link). Hopefully all goes well. I figured there would be little to no support for this device, however due to a tight budget I chose to get this tablet.
I don't really mind the lack of support, however I'd like to have root because like on my old phone I had a few programs I used that required root.
Thanks again.
*Edit*
I attempted last night as I had free time to do the root method and unfortunately it did not work on my device. Not sure why it did not work. I'll try it again at a later time when I can. I also attempted to upgrade to 4.2 but it seems as though I am having issues with it as well.
Maybe I'm just stuck with the tablet as is
Click to expand...
Click to collapse
It may have been the sequence I used. Tried SuperOneClick several times (as above it said tablet was rooted but several apps said it wasn't) which installed su, busybox, and superuser. Then found Bin4ry's method, got temp root (tryied 1, 3, and Glass). Then went back to SuperOneClick and unrooted, returned to Bin4ry's and finally got it with Glass method.
Don't know if that helps
Well
After several attempts via Bin4ry and SuperOneClick I have obtained root on this tablet.
Not quite sure which actually did it though as with super one click it froze on me during both times I used it and each time I tried Bin4ry's method I kept getting messages about connecting my device (which was connected fro the get go).
After several tries with these programs yesterday and finally saying screw it I decided to add some apps that required root. I don't know why I did it I just figured it was worth a shot. I added Super User which told me I was rooted, then I added Titanium Backup and was able to use it as it is intended. For added measure I also installed and ran root checker which as well as super user verified that the tablet had been rooted.
Good to see that your were able to root.
BizarreMan said:
After several attempts via Bin4ry and SuperOneClick I have obtained root on this tablet.
Not quite sure which actually did it though as with super one click it froze on me during both times I used it and each time I tried Bin4ry's method I kept getting messages about connecting my device (which was connected fro the get go).
After several tries with these programs yesterday and finally saying screw it I decided to add some apps that required root. I don't know why I did it I just figured it was worth a shot. I added Super User which told me I was rooted, then I added Titanium Backup and was able to use it as it is intended. For added measure I also installed and ran root checker which as well as super user verified that the tablet had been rooted.
Click to expand...
Click to collapse
So I think we can safely say that using both methods together + patience will root this tablet (don't know why one or the other wouldn't do it).
Not having any luck
CyberSpiderPrime said:
Does anyone have any information on rooting the AZPEN A701 Tablet (ICS OS)?
All my searches keep popping up for the Acer Iconia A701.
Click to expand...
Click to collapse
I have been trying to root AZPEN A701 for the past week, I have tried everything written on this forum. Any help PLEASE!
clean slate
Are you willing to do a full restart on the tablet (factory reset)? I had to do that before my root took, as I found on other systems that I have rooted some programs you load can interfer with rooting. Save any personal data before you do this, programs can be reinstalled from Google Play or (hopefully you saved them if you downloaded them) your computer
Factory reset:
Press and hold up volume button then press and hold power button. The screen will remain black (no backlight)
Wait 4 seconds then release both buttons (backlight will come on). Shortly the android on it's back with the open torso (the sick android) will be displayed.
Press the down volume button. You should see 5 options available- You are now in the System Recovery program.
Using the up or down volume button to highlight an option then press power to select the option.
1) select Wipe Cache Partition
let the unit reboot, then turn it completely off
reenter System Recovery again.
2) select Wipe data/factory reset
let the unit reboot, then turn it completely off
The system is as clean as it is going to get now.
On your pc (don't know for MAC's) download the drivers, Android programs needed (Android Debug Bridge -ADB- is part of the Android Development kit and some Java Development Kits), and both SuperOneClick and Bin4ry's root software. Install all software and drivers as per their instructions. Run SuperOneClick and Bin4ry's root programs. Busybox and SuperUser will be added automatically by these root programs.
While having wifi and internet access (McDonalds anyone?), re-sign up for Google Play (sorry, but the settings got wiped earler). Go to Google Play and let all the programs update. Update Busybox and SuperUser if needed/possible.
Download any root enabled file system browser (FSB) (permission will have to be granted in program to use root functions) - I used Ghost Commander for mine. It may take a bit to find it in the directory structure for the FSB you downloaded but you need to get to the root system folder.
Ghost Commander has a Local Storage option press it and an new list of folders/files will be displayed, move to the previous folder level (double dots at the top) and give permission to move to a system folder, move to the previous folder again to get to root directory, "/mnt" is the directory you just came out of and is highlighted but you will be at the root of the file system.
Enter the "/data" directory. If you can see files listed there, you have root; if not rooting attempt failed.
Once rooted, doing a system cleaning and Factory reset will not remove root but will remove SuperUser and Busybox (re-run one of the root programs to re-install then update the next time you are on the internet/web). Updating/upgrading the rom will remove root if the rom does not have root activated - I don't know of any custom roms for this tablet (there is a Jellybean upgrade in the Azpen website, if they haven't updated to the correct web address then use the one I listed on the front page, mediafire is spelled wrong in the address). Nandroid level system backup is not available yet for this tablet to my knowledge.
For several reasons, do not turn on SuperUser's automatically give permission option (the one that affects all programs), except on a one for one basis: 1) some root testing programs will fail if this option is turned on, 2) security: turning this on will allow ALL programs - including some malicious ones - to have super-user rights, 3) you will get to know which programs are asking for root permissions beforehand not after, you may want some to have automatic access (like DroidWall in my case, a firewall) and not others.
Also other information that can be useful:
/sdcard does not refer to the removeable SDCard but to the internal user data area. All programs that can be moved to a SDCard (like by Apps2SD) will be moved to this directory by default (some may allow re-assignment of the destination location) instead of the removeable SDCard (blame Azpen, it was their decision to use the directory and name that way). On most other systems /sdcard is the removeable SDCard.
/extsd is the removeable SDCard, when installed, maximum size is 32Gb.
/usbhost1 is for any usb flashdrive connected by a USB-OTG cable (OTG means On-The-Go, special usb cable that puts the tablet into host mode, similar to connecting a flashdrive to a computer, the cable is not a standard Data Connect/transfer cable, one USB-OTG comes with this tablet). Note about USB-OTG cables: if one is connected you can connect either a flashdrive, usb keyboard, usb mouse, combo keyboard/mouse unit, or a powered usb 2.0 hub. Only one flashdrive can be connected at a time (anyone know of downloadable software that would allow 2 or more? I know some modified kernels can allow more than one) so with a hub you can connect a flashdrive + keyboard + mouse (I use the RII wireless combo keyboard and mouse with mine). Maximum size appears to be 8GB, format must be FAT32; will be testing with a 16GB key shortly.
Azpen A701 and Jelly Bean
Shortly after I wrote the above I had to re-flash my tablet, but Azpen had deleted the ICS image (after a request it was restored to the site, get it while you can) and had to flash Jelly Bean. I found there were troubles with this image.
First: I could not write to either the external SDCard (called extsd) nor an attached USB flash key; reading was unaffected. I found this out when I attempted to reassign my backup location to the external sdcard and it was unable to create the directories.
Second: I couldn't find a rooting program.
After a little research, I found that the external media had not been given R/W permission in the platform.xml file - I could actually navigate the FS and read the file even without root.
Also I finally found after 2 days of searching a root program, VROOT, http://forum.xda-developers.com/showthread.php?t=2434453, that would work. Be prepared to deal with Chinese for a little bit and follow the instructions on that page (press the buttons to see screenshots). The superuser app needed to fix/replace the Chinese app is SuperSU (Google Play) which supposedly fixes problems found with other superuser apps. Once you have downloaded SuperSU, had it download/update its binaries and have rebooted, you will have to disable the Chinese Superuser app as you are unable to uninstall it using the app manager: I located it by its icon (shield with cog) in /system/app and appened '.old' to the name: "Superuser.apk" => "Superuser.apk.old'. I didn't use Titanium Backup as suggested because I am not a fan of the program .
platform.xml is located in /system/ext/permissions. After you have root, open platform.xml in what ever text processor you want locally or transfer it to your computer and work with it. You will have to add '<group gid="media_rw">' to the 'WRITE_EXTERNAL_STORAGE' group, on the line after '<group gid="sdcard_rw">' (don't type the single quotes but the double quotes are needed) and write the file back to its location (need root for that, adb pull/push may be possible to fix this). Remember on this tablet, sdcard refers to the internal user storage, media_rw will give permissions to the extsd (external sdcard) and USBHost1 (using included USB-OTG cable and a flash drive). I rebooted the tablet and tested the RW state of extsd, and voila, it now is write capable.
I wish there was more aid on this tablet but since it is not mainstream (not made by a big manufacturer like LG, Motorola, Samsung, etc.) I doubt that it is coming (I am not a ROMmer but have been using computers since the 80's, so I know a few tricks and am always learning). I will keep adding info as I find or fix it.
I will probably go back to ICS as some of my programs are not working right, and JB is sluggish.
I just picked up the A700 from Microcenter, and this is the ONLY reference to rooting the device I could find. The Azpen website doesn't even acknowledge the device's existence. I just came across this yesterday: Azpen A700 - Cyanogenmod forums. I used the Kingo method without a hitch.
Hopefully, all the other folks who get that tablet for the pre-Black Friday sale who found this link will benefit.
johncro13 said:
I just picked up the A700 from Microcenter, and this is the ONLY reference to rooting the device I could find. The Azpen website doesn't even acknowledge the device's existence. I just came across this yesterday: Azpen A700 - Cyanogenmod forums. I used the Kingo method without a hitch.
Hopefully, all the other folks who get that tablet for the pre-Black Friday sale who found this link will benefit.
Click to expand...
Click to collapse
I picked up this tablet also. Not bad for $40. I used this method to root http://www.cydiaimpactor.com/ It worked the first time. I just had to do it on an old XP machine. Windows 8 would not load the right android drivers. Now I'm working on getting Titanium backup to see my external SD card.
comstar said:
I picked up this tablet also. Not bad for $40. I used this method to root http://www.cydiaimpactor.com/ It worked the first time. I just had to do it on an old XP machine. Windows 8 would not load the right android drivers. Now I'm working on getting Titanium backup to see my external SD card.
Click to expand...
Click to collapse
I was going to return it as no rooting procedure would work....(I only bought it so I could have a android tab to fool with...i'm windows tablet all the way)...and once I tried out that rooter it worked...thanks alot for the info!
cheeb said:
I was going to return it as no rooting procedure would work....(I only bought it so I could have a android tab to fool with...i'm windows tablet all the way)...and once I tried out that rooter it worked...thanks alot for the info!
Click to expand...
Click to collapse
Glad it worked for you! I started this thread for the A700 http://forum.xda-developers.com/showthread.php?t=2532464 - No activity in it yet. But if you come across anything good post it over there.
Sent from my Transformer TF101 using XDA Premium HD app
Update
I am glad to see that others are taking an interest in this tablet.
I found 2 methods that worked and am glad that others are finding more.
Now if I can get the boot loader cracked I could finally make a nandroid copy and save myself 4+ hours restoring everything when it goes wonky. This has happened twice- OS partition fills up (and don't know why) and the device resets to near factory reset level (even some of the factory apps are missing) and won't install anything but the smallest of apps which are deleted on the next reboot; the only solution is to re-flash the tablet. Note that I have gone back to using ICS as JB has other problems (external media including its own sdcard partition is not rw enabled for one).
Hi there, i've been trying to make some changes to my build.prop (mainly enable miracast...can't believe they would disable it!) and i've had a rather challenging time.
I am now stuck on how to pull the actual build.prop...when i enter the command i get a long list of ADB definitions but no file - at least not that i could find. I tried a few times, including directing the file to be saved on an empty drive in case i could not see it.
I have unlocked my boatloader and installed TWRP. Mounted the system then gone back and entered the commands in ADB....and i don't seem to be having any success. Any help would be appreciated.
thanks
m
Why not just edit it within the built in editors in most file explorers? I use Solid Explorer and it allows me to edit at will within the app itself, no pushing or pulling. Of course I back up my current one before doing anything to it
Tower1972 said:
Why not just edit it within the built in editors in most file explorers? I use Solid Explorer and it allows me to edit at will within the app itself, no pushing or pulling. Of course I back up my current one before doing anything to it
Click to expand...
Click to collapse
i'm not rooted...and i've read that you don't get OTA updates...and it's happened to me more than once that i have an issue with the phone, and i can't get service because it's rooted...
and i guess i thought it was too much trouble to get rooted, make the changes, and then unroot...but i could be wrong at this point?!
You won't get OTA with twrp either. You need stock recovery.
so i bit the bullet and rooted my phone...i was able to get the build.prop editor to work (at first i did not have busybox which it seems helps apps to realize you have root). So now when i go to unable Casting, i can turn it on from the top right of the cast screen, and my tv appears. I can select it and it starts to sync up...then the mircosoft display adapter shows that it's also trying to sync...and then it times out it seems. I've checked it with my tablet and my wife's phone...both work.
any suggestions?
I understand Miracast no longer works in Nougat. I'm still on MM with my 6P and it works, but if you're on 7, you may have lost that feature.
What about WUGS toolkit? Do you need to re rooted for that...ifnot thats what I always use to edit the prop. So much easier as it has most edits you'll make and you just choose.
you never needed to root i edit build.prop like this all the time
1. boot to twrp recovery
2. go to mounts and select system
3. adb pull /system/build.prop
4. make edits
5. adb push build.prop /system/
idk if your edit will work but thats how to do it without root and for some of the other things said in this topic you can ota in twrp but it will fail if modify anything like you just did