Would like to know if accepting the OTA update installs the jig disabled secondary bootloader that the UCKK6 leak included. Anyone who has done the OTA update and also has the jig boot into download mode using the jig. If the secondary bootloader was not changed, the screen should indicate the counter has been reset. If that indication is not there, then additional testing will be needed to verify if the bootloader is jig disabled.
Thanks in advance for your help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is on 2.3.6 stock. Incase you can't read it, in green it says erasing download information succeeded. I can't remember what it said before when I reset from zedomax.
Sent from my SAMSUNG-SGH-I777 using XDA App
Good news.
On UCKH7 stock bootloader it says the same.
Looks like the OTA update doesn't include the secondary bootloader, or if it does, it's not the disabled one. Most likely just doesn't install it at all.
Thanks for the quick reply.
No problem creepy. Thanks for all your work here. Once its confirmed that the jig method still works I will reflash with the zedo method. I just need to be sure not to be stuck with an incremented flash counter.
Sent from my SAMSUNG-SGH-I777 using XDA App
It probably does. Here is a link to the UCKH7 Secondary Boot Loader. I am using it on UCKK6 and it works. I know the oneclick UCKK6 released by Designgears does. I have not installed the OTA.
http://forum.xda-developers.com/showthread.php?t=1316726
GalaxyMaster said:
No problem creepy. Thanks for all your work here. Once its confirmed that the jig method still works I will reflash with the zedo method. I just need to be sure not to be stuck with an incremented flash counter.
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
Your initial post was with stock UCKK6 put on your phone via the over the air update, right?
creepyncrawly said:
Your initial post was with stock UCKK6 put on your phone via the over the air update, right?
Click to expand...
Click to collapse
Yes I updated via ota on Thursday after I returned to stock via your thread. I took the photo of the jig screen and the screen shot today. The first pic is crappy because it was taken on my tablet.
Sent from my SAMSUNG-SGH-I777 using XDA App
OK. I was just a little confused by your other post. I think the most likely scenario is that the ota update does not install any bootloader. It's really very risky to install bootloader via ota, and I don't think AT&T is willing to do that after the fiasco they had with the first Captivate ota update.
creepyncrawly said:
OK. I was just a little confused by your other post. I think the most likely scenario is that the ota update does not install any bootloader. It's really very risky to install bootloader via ota, and I don't think AT&T is willing to do that after the fiasco they had with the first Captivate ota update.
Click to expand...
Click to collapse
yea , i am a confusing person , I just dont have the balls to try and flash cwm and be stuck with the yellow triangle lol. I am ok running stock 2.3.6 for now but i will want the ics port when it comes out. I just wish i could get all the ringtones in unnamed rom.
---------- Post added at 10:30 PM ---------- Previous post was at 09:50 PM ----------
ok I took the plunge and did the OTA update on thursday when it was released , running stock 2.3.6 I flashed cwm using the zedomax method through odin which gave me the yellow triangle , powered off and inserted my usd jig and no more triangle and custom binary count reads 0 and it is rooted. however now my wifi isnt working.
Attempted to flash using only a custom kernel (counter already reset) and it failed real quick. No other modifications. So... as others have probably already mentioned if you have a custom kernel (even without other changes) it will likely fail. I'll be going over to the mobile odin method now.
shinji257 said:
Attempted to flash using only a custom kernel (counter already reset) and it failed real quick. No other modifications. So... as others have probably already mentioned if you have a custom kernel (even without other changes) it will likely fail. I'll be going over to the mobile odin method now.
Click to expand...
Click to collapse
Let us know the results please.
Sent from my SAMSUNG-SGH-I777 using XDA App
Related
LOL not, unbrickable!! phone is elegant inddeeed!
brandonkahn said:
i flashed to froyo 2.2 from hybridr4 2.1 rom using clockwork, everything worked fine nice rom(2.2)... but then i decided to go back to hybrid r4... when i installed the package it just sets at the samsung i9000 splash screen for this rom... i can load into clockwork but for some reason i cant get this 2.2 back onto my sd card... any ideas?
now i did a format of the sd card thru clockwork because it was showing old files on it when i went to load no matter what and would never show 2.2 even if i put it on there, but now thru samsung recov. utility when i go to install package it says E: cant open /sdcard/update.zip installation aborted.... am i screwed?
Click to expand...
Click to collapse
Can u get your phone into download mode?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am assuming when you flashed back you forgot to flash a stock kernel at the same time. try using odin to get back to stock and you should be fine
Thegreat520 said:
Can u get your phone into download mode?
Click to expand...
Click to collapse
Was gonna ask the same thing.
If you can you should be able to to use ODIN to get back to stock.
Sounds like you forgot to flash a 2.1 kernel before you rebooted.
yaddayaddayadddaaaaa
Surprised no one has said "OMG! WRONG SECTION! I'M NOT GONNA HELP YOU!"
But yea, flash a kernel if you can can. Check the Bionix website for them. Also, in the future, make sure you READ everything pertaining to a rom you flash. If you had, you would have known you needed to flash a 2.1 kernel if you wanted to revert.
Odin 1.3
Yeah I've done the same thing before. When you downgrade from 2.2 you must flash a 2.1 kernal first. Best thing to do is re-flash back to stock with Odin. Make sure you use Odin version 1.3 and not version 1. Search the dev forum for how to flash with Odin. The Vibrant is very hard to brick permanently so you should be able to recover from this soft brick.
brandonkahn said:
i flashed to froyo 2.2 from hybridr4 2.1 rom using clockwork, everything worked fine nice rom(2.2)... but then i decided to go back to hybrid r4... when i installed the package it just sets at the samsung i9000 splash screen for this rom... i can load into clockwork but for some reason i cant get this 2.2 back onto my sd card... any ideas?
now i did a format of the sd card thru clockwork because it was showing old files on it when i went to load no matter what and would never show 2.2 even if i put it on there, but now thru samsung recov. utility when i go to install package it says E: cant open /sdcard/update.zip installation aborted.... am i screwed?
Click to expand...
Click to collapse
I had the same problem just two days ago and I thought I ruined my phone. Follow the instructions in this post
it saved my phone. Do not format your phone with cwm. Bad things happen.
https://sites.google.com/site/projectbionix/home/downloads
You can flash any one of these ROMs and they will include the correct kernel and modem.
brandonkahn said:
yeah i didnt flash the kernel, rookie mistake. the only the i can get to on my phone is samsungs recov. mode at this point by holding up and down and power... so not sure how to get odin on there or whatever..appreciate any and all help, and if someone can provide a fix here im wlling to donate 15 bucks via paypal
Click to expand...
Click to collapse
With phone off,hold volumes up and down and plug cable into phone.Don't touch power when doing this.That should get you to download mode.
this one dude was honestly trying to get me to try to install a rom so eagerly it was scary.
brandonkahn said:
im sorry but how do i do this? is it possible to do a flash if i cant load in to anything but the samsung recov on my phone? again if you provide links for downloads and instructions etc. i will gladly donate 15 to paypal because i really cant afford the insurance fee at this point lol thanks so much
Click to expand...
Click to collapse
The same thing happened to me and i was stuck at the Galaxy GT 19000 boot splash.
What i did was go into Download mode using ADB:
*adb reboot download*
Then i used odin with THIS guide h t t p : / / forum.cyanogenmod.com/topic/6998-howto-how-to-recover-from-a-soft-brick-on-your-vibrant-and-return-to-stock-phone-pc-error/
OMG wrong section! I'm not going to help you
Sent from my Galaxy S with GINGERBREAD using XDA app
themodel ur the best ever!!
use Odin to restore your rom!
I think the easiest thing to do is flash any of the ROM that have Kernels in them, I have only had to use odin once, and that was just to try it out. I always keep stuff on my card, But i guess if you didnt going back to stock through odin would be the next best thing.
Greg ODIN!!!!
brandonkahn said:
i really need to know how to get into download mode so i can use odin, can someone please explain.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=734475
Follow the directions in the forum. for me I held up and down with power and had my wife plug it into the usb for me, worked the one time i tried. but thats why the thread is better from what most have said each phone is a little different depending upon date it was made.
u guys are so funny, rock bottoms!
brandonkahn said:
YES!! you guys are the best! so if my phone was rooted before this is it still rooted or did this unroot it??? thanks guys.
Click to expand...
Click to collapse
Depends on what you flash, but even if its stock with no root, root is very easy on the phone, just do whatever worked for you the first time.
I finally rooted my note but how do I tell which one i have. I installed Odin a while ago which is what i used to root today, as I'm sitting here i think i used the Odin from the non flash counter thread...but i want the flash counter root method so i can flash rom. Super user was already installed after Odin finished if that tells you anything.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Go into download mode and if it says custom binary and you have a flash count, then you went the odin method from Da_G's root.
Edit: you can flash all roms either way. Once you have CWM, you are good to go!
jpeg42 said:
Go into download mode and if it says custom binary and you have a flash count, then you went the odin method from Da_G's root.
Edit: you can flash all roms either way. Once you have CWM, you are good to go!
Click to expand...
Click to collapse
Really...works for me but what's the point of the 2 mothods? I thought one was for root apps only (no flash counter) and the other was for root apps and rom flashing.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
I just checked and i didn't see any flash counts...but your saying i can still flash roms?
Sent from my SAMSUNG-SGH-I717 using Tapatalk
They both achieve root via different levels of the platform. One ups the flash counter, one does not. But no difference in the end. Just your choice depending on if you are worried about the flash counter or not.
If you can boot into clockworkmod recovery, then you just select the zip file of the ROM you want to flash and you are done! Nothing else to it. But just because you are rooted, it does not mean you have recovery. Search the threads in the dev section and install recovery if you want to flash ROMS.
jpeg42 said:
They both achieve root via different levels of the platform. One ups the flash counter, one does not. But no difference in the end. Just your choice depending on if you are worried about the flash counter or not.
If you can boot into clockworkmod recovery, then you just select the zip file of the ROM you want to flash and you are done! Nothing else to it. But just because you are rooted, it does not mean you have recovery. Search the threads in the dev section and install recovery if you want to flash ROMS.
Click to expand...
Click to collapse
I don't have recovery yet, ill probably flash that tomorrow. I just don't understand why there's 2 or more methods for root when they all do the same thing...why would anyone want to trip the flash counter if they didn't have to by using the other method...unless one was available before the other. I guess in the end it doesn't matter but I'm glad i rooted this way rather than the way i thought i did just in case i need a replacement...although i haven't heard of any issues with flash counter yet.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
...unless one was available before the other.
Click to expand...
Click to collapse
Bingo! xx
jpeg42 said:
Bingo! xx
Click to expand...
Click to collapse
That's what i figured. Lol
Sent from my SAMSUNG-SGH-I717 using Tapatalk
The different methods is what is confusing me too. Correct if I'm wrong though, even if I root without tripping the counter, Installing a rom or cwm will trigger the counter?
BLASTphemus said:
The different methods is what is confusing me too. Correct if I'm wrong though, even if I root without tripping the counter, Installing a rom or cwm will trigger the counter?
Click to expand...
Click to collapse
If you don't want to trip the counter, you also need to install cwm via the "no flash counter" method. See the second post in the recovery thread. but once you have that on there, you can flash non-odin roms all day without tripping the counter.
jpeg42 said:
If you don't want to trip the counter, you also need to install cwm via the "no flash counter" method. See the second post in the recovery thread. but once you have that on there, you can flash non-odin roms all day without tripping the counter.
Click to expand...
Click to collapse
is this the thread you mentioned...if so, seems a little too much for me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SAMSUNG-SGH-I717 using Tapatalk
That's the one! But if you need help, with that process, I'll let someone else step in. I didn't go through it as Odin is a one click deal and I am not worried about tripping my counter.
jpeg42 said:
That's the one! But if you need help, with that process, I'll let someone else step in. I didn't go through it as Odin is a one click deal and I am not worried about tripping my counter.
Click to expand...
Click to collapse
I'm not too worried about the flash counter either...thanks for the help tho. :thumbup:
Sent from my SAMSUNG-SGH-I717 using Tapatalk
I updated my bell note to ICS yesterdsay, and flashed cwm, odin shows PASS, after holding volume + and - while rebooting, I entered "android system recovery" I guess it's official recovery mode, instead of cwm, is there anything wrong? pls help, thanks
uzmcue said:
I updated my bell note to ICS yesterdsay, and flashed cwm, odin shows PASS, after holding volume + and - while rebooting, I entered "android system recovery" I guess it's official recovery mode, instead of cwm, is there anything wrong? pls help, thanks
Click to expand...
Click to collapse
Go here to find tools, needed to get CWM and Root....if you had root, once you updated you lost cwm and root....kk
CLICK ME
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bigjoe2675 said:
Go here to find tools, needed to get CWM and Root....if you had root, once you updated you lost cwm and root....kk
CLICK ME
Click to expand...
Click to collapse
Thanks for your reply
it was not rooted before, i flashed CWM touch from development section, but I am not able to enter CWM, I only got into "android system recovery", I cannot install busybox.
uzmcue said:
Thanks for your reply
it was not rooted before, i flashed CWM touch from development section, but I am not able to enter CWM, I only got into "android system recovery", I cannot install busybox.
Click to expand...
Click to collapse
holding the down volume and power button...does not work????
bigjoe2675 said:
holding the down volume and power button...does not work????
Click to expand...
Click to collapse
holding the volume down and power got me into downloading mode, that worked, I flashed cwm.
but to get into recovery mode, I need to hold volume up down and power, that's correct? I only entered adroid system recovery.
Thanks
Where did you put the cwm tar in Odin? It should be in the PDA section. After that yes you should be able to get in with the power and volume up buttons.
Sent from my SAMSUNG-SGH-I717 using xda premium
aevans88 said:
Where did you put the cwm tar in Odin? It should be in the PDA section. After that yes you should be able to get in with the power and volume up buttons.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
yes, I put it in pda
with a never rooted gnote, I only need to flash cwm with odin, then I should be able to enter recovery mode, am I missing something? any other files should be flashed?
Correct but you want to flash the super user zip once your in cwm if your going for root
Sent from my SAMSUNG-SGH-I717 using xda premium
I rooted my s3 and tab10.1 without any issues, it's wired this time
Idk either can you post a pic of what or Odin says when its done
Sent from my SAMSUNG-SGH-I717 using xda premium
I think post 16 of this thread may be helpful..
http://forum.xda-developers.com/showthread.php?t=1766181&page=2
I think we may have to consider a Canadian carrier specific thread as I think our recent ICS upgrade has introduced some challenges specific to those of us north of the border...
Of course. Sorry I could not be of any help
Sent from my SAMSUNG-SGH-I717 using xda premium
Same here, I flashed CWM by Odin & all was good but when Im trying to go at CWM recovery mode it just go straight Android Stock Recovery.
Please help
Sent from my SGH-I717M using xda app-developers app
FYI: I rooted my note AT&T when it had GB(stock) and when Samsung squeezed out the official ICS I updated through Kies which in turn unrooted the Note.
I read this thread -->here<-- hoping for a similar method to root the official ICS 4.0.4 WITHOUT tripping the counter. So far (if I didn't miss any info) only found modded ROMs and flashing methods. I don't want to flash I simply would like to repeat the same rooting process as that of GB.
Any suggestions?
youngunix said:
FYI: I rooted my note AT&T when it had GB(stock) and when Samsung squeezed out the official ICS I updated through Kies which in turn unrooted the Note.
I read this thread -->here<-- hoping for a similar method to root the official ICS 4.0.4 WITHOUT tripping the counter. So far (if I didn't miss any info) only found modded ROMs and flashing methods. I don't want to flash I simply would like to repeat the same rooting process as that of GB.
Any suggestions?
Click to expand...
Click to collapse
I'm interested in the same thing, given there are directions and an Odin Tar for System flash (which doesn't trip counter) for Stock Gingerbread which has root installed. Is this something the devs could look into? I know that there are a few that are working with stock and modding after stock is rooted, it would be great to have that system.tar for flashing and using ADB to install CWM and then still keep the flash counter from being tripped.
I know there is a CWM for resetting the flash counter, but that's not something I want to mess with. Have heard rumor that they can still see that you flashed something that isn't stock and that's even if you have reset the counter. Not sure on confirmation but that's what I heard. Just want to stay clean like I have already.
Thank you all for any help with this issue!!
uzmcue said:
with a never rooted gnote, I only need to flash cwm with odin, then I should be able to enter recovery mode, am I missing something? any other files should be flashed?
Click to expand...
Click to collapse
Try following this its what I used http://forum.xda-developers.com/showthread.php?p=28821450
If you updated OTA it seems us Canadians have a script that rewrites the recovery to stock.
Sent from my SGH-I717D using xda app-developers app
ok i saw all the threads but no help ...
symptoms... no recovery (just battery logo), download mode is working,
when i flash siyah it gets bootloop... stuck at samsung logo...
odin is flashing normaly without error...
these are the screens i get
1. recovery (battery logo)
2. entering download mode
3. download mode
https://www.dropbox.com/sh/lb2vi1y7h833q50/T1c9GSy8kx
gt-i9100
ssn i9100gsmh
fcc id a3lgti9100
which rom should i download and with which version of odin to flash
everything id downloaded ok and odin flashes without problem ...?
Flash philz touch or cf kernel then siyah
Send from my SGS2 I9100 with HassanROM and latest DorimanX 8.xx kernel
Ok i will try asap... Will report back
still nothing...
sabirwest said:
still nothing...
Click to expand...
Click to collapse
Go to sammobile.com, sign up, dl a stock rom, flash through Odin, root.
THE biggest issue is that i cant get to recovery, i allready downloaded stock rom and tried. right now i am downloading i9100xwlss version to try because my friend has thatone on his phone working... i just have no starting point to begin with. allready got bricked phone and i dont know on which carrier it was, whic android version it had. etc.. will try this and then i give up. lots of time i have lost trying.
sabirwest said:
THE biggest issue is that i cant get to recovery, i allready downloaded stock rom and tried. right now i am downloading i9100xwlss version to try because my friend has thatone on his phone working... i just have no starting point to begin with. allready got bricked phone and i dont know on which carrier it was, whic android version it had. etc.. will try this and then i give up. lots of time i have lost trying.
Click to expand...
Click to collapse
You put phone into download mode and flash through Odin. There are many guides on here for directions
Here's one guide. Read the full first page
http://forum.xda-developers.com/showthread.php?p=21659039
yeah i know, many guides i have done, walked through, but nothing helps. odin flashes without problem. phone restarts and still no recovery with bootloop... flashed this and that.. and still same issues.
Flash JB leak firmware via odin (comes as 3 parts - Pda, phone and csc). Then see if it boots. If it doesn't, try to enter recovery and factort reset.
Report back what happens.
"To err is human, to forgive is divine"
Sent from my SGS II
I've seen a couple of these cases happening lately, my bet is on the bootloader, eventhough I don't encourage people to try flashing it. Or, as always, OP is holding something back.
Neo, I'm not familiar with the ROM being downloaded from a non-stable internet connection and I know you get them from an internet cafe. Now, is it possible that Odin would allow (flash) a corrupted ROM?
Sent from the little guy
sabirwest said:
yeah i know, many guides i have done, walked through, but nothing helps. odin flashes without problem. phone restarts and still no recovery with bootloop... flashed this and that.. and still same issues.
Click to expand...
Click to collapse
try to find the stock rom that comes in 4 files, CSC, PDA, modem + bootloader
sabirwest said:
yeah i know, many guides i have done, walked through, but nothing helps. odin flashes without problem. phone restarts and still no recovery with bootloop... flashed this and that.. and still same issues.
Click to expand...
Click to collapse
I literally did this yesterday. After you flash stock you have to boot into 3e (stock recovery) and wipe data. This will stop the bootloop and you can carry on with rooting if that's what you want.
It's better to wipe dalvik, you need CWM for that, that's why it's always suggested to flash a custom ROM when on a bootloop.
Sent from the little guy
jeah i know but whatever i flash i still have no recovery...
ok now its official. phone memory is problem, i went to service today and they told me that when i flash with odin the values that i flash dont stay in the memory, on the next boot
those values get clear, memory bug of some kind, he said that he can manual and direct approach to the motherboard and write recovery directly but he cant say if it will always
work like it is suppose to.
Hum....I think you're getting conned, as the matter of fact, he must be reading this right now.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from the little guy
Just as i thought
Sent from my GT-I9300 using xda app-developers app
Check other threads, I'm dealing with 3 guys with this same issue.
Sent from the little guy
officialy the phone went bye bye !!!! Cheers for being with me in those hard times !!!
Pit file flash?
Sent from the little guy
okay, so basically, i had 4.3 with ss running hyperdrive.I deleted the hyperdrive slot and then odin'd my phone back to stock, and proceeded to upgrade my phone up to current. I then used towel root, to make sure that i had root, and went on to install the newest (3.71 i believe) version of safestrap. I was running the aroma installer for the new hyperdrive when it just cut out and now my phone won't boot and the exact files i used to restore my phone with odin earlier today won't work anymore. Does anybody have any ideas on what i can do?
m4gkman said:
okay, so basically, i had 4.3 with ss running hyperdrive.I deleted the hyperdrive slot and then odin'd my phone back to stock, and proceeded to upgrade my phone up to current. I then used towel root, to make sure that i had root, and went on to install the newest (3.71 i believe) version of safestrap. I was running the aroma installer for the new hyperdrive when it just cut out and now my phone won't boot and the exact files i used to restore my phone with odin earlier today won't work anymore. Does anybody have any ideas on what i can do?
Click to expand...
Click to collapse
3.71 ss can't be used for Android 4,4....first mistake.
sent via safestrap 3.72 and echo v25.1! !
Well that was the most recent version I could find, but I just need to get my phone running again. Odin keeps failing and I cant seem to figure out why
Sent from my GT-N8013 using XDA Free mobile app
decaturbob said:
3.71 ss can't be used for Android 4,4....first mistake.
sent via safestrap 3.72 and echo v25.1! !
Click to expand...
Click to collapse
hopefully i can get my phone running today. But I had seen on the safestrap sticky that you had directed me to yesterday, that was the most recent version and i even asked somebody on that thread for the modules to flash. I also read that with 4.4 you had to use the stock slot that was the downside. So what exactly do i have to do to get a rom working on 4.4?
Phone still won't comply with odin, it fails every time, even with files directly from samsung. I just want to get my phone back and running
heres what I get when I try.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
m4gkman said:
Phone still won't comply with odin, it fails every time, even with files directly from samsung. I just want to get my phone back and running
heres what I get when I try.
Click to expand...
Click to collapse
Grab Odin 3.09 and try again.
Smabbage said:
Grab Odin 3.09 and try again.
Click to expand...
Click to collapse
I actually had odin 3 but it kept not responding. I took the phone to best buy and they fixed it real quick for me.
m4gkman said:
I actually had odin 3 but it kept not responding. I took the phone to best buy and they fixed it real quick for me.
Click to expand...
Click to collapse
I've found that if the cable isn't positioned just right, Odin won't respond. Took me a while to figure that one out. Had to hold the cable and phone just right during my last Odin install to make it take.
Smabbage said:
I've found that if the cable isn't positioned just right, Odin won't respond. Took me a while to figure that one out. Had to hold the cable and phone just right during my last Odin install to make it take.
Click to expand...
Click to collapse
A lot issues with phone and odin goes back to USB ports... Cables... And then drivers...
sent via safestrap 3.72 and echo v25.1! !
decaturbob said:
A lot issues with phone and odin goes back to USB ports... Cables... And then drivers...
sent via safestrap 3.72 and echo v25.1! !
Click to expand...
Click to collapse
Nearly lost my lunch when my first Odin flash failed. It was only due to sure strength of will and some persistence that I figured out what the problem was. At one point I thought I had a $380 brick. :laugh:
Smabbage said:
Nearly lost my lunch when my first Odin flash failed. It was only due to sure strength of will and some persistence that I figured out what the problem was. At one point I thought I had a $380 brick. :laugh:
Click to expand...
Click to collapse
Been real hassle for some... Knock on wood... So far I have no issues with odin.
sent via safestrap 3.72 and echo v25.1! !