I have changes the boot animation on my SGA and i rebooted the phone after everything for to see it (droid animation) and my phone gets stucked there its like the animation is in front of everything.
I have wiped all data in recovery mode but nothing happens,its the same.
Any solution???!!!!
Flash cwm then flash cyanogenmod and youre done
Sent from my GT-S5830 using xda premium
robinandroid said:
Flash cwm then flash cyanogenmod and youre done
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Im noob on this,i dont understand your response.
Take a look at the noob guide. If i am not mistaken, you need to wipe data/cache
twister26 said:
Take a look at the noob guide. If i am not mistaken, you need to wipe data/cache
Click to expand...
Click to collapse
I already made that,and its the same.
what about wiping dalvik? i am not sure if that would help, so you'd better wait for another opinion before wiping dalvik.
remove battery.
flash another roms.
sometime custom roms not compatible with custom kernel.
Well,i had to use Odin again and i lost all my APPs and data.Thanks everybody.
Related
Hi,
I just bought an AT&T SGS2. I began by rooting it, flashing cwm and trying to flash MIUI. But the phone would not boot up. So I downloaded ODIN one click back to stock and flashed that, but the phone still does not boot past the AT&T screen. I've tried flashing different roms from cwm none of which boot up.
Please point me in the right direction to get the phone to boot.
Thanks
Can you get into cwm? Id bet you didn't wipe before you flashed
smknutson said:
Can you get into cwm? Id bet you didn't wipe before you flashed
Click to expand...
Click to collapse
+1 this.
boot into cwm>factory wipe data/factory>delete cache partition>delete dalvik cache> install zip from sdcard>pick your ROM...
Thanks guys wiping the all the caches did the trick. I didn't know it was a requirement for this phone. I came from a Captivate where is wasn't required to wipe everything.
Sent from my SGH-I777 using XDA App
smknutson said:
Can you get into cwm? Id bet you didn't wipe before you flashed
Click to expand...
Click to collapse
He doesn't have CWM if he used the one-click back to stock, unless it failed and didn't flash a kernel. Stock kernel has 3e recovery.
kperajis said:
Thanks guys wiping the all the caches did the trick. I didn't know it was a requirement for this phone. I came from a Captivate where is wasn't required to wipe everything.
Sent from my SGH-I777 using XDA App
Click to expand...
Click to collapse
Even on the Captivate, you had to wipe whenever flashing a new ROM. Returning to stock is, effectively, flashing a new ROM (the stock one).
Hello my friends.
I unlocked the BL and install the CWM. So i try to install a new ROM at my Atrix.
I made the installation of the Neutrino V1.4 GT, but after made the installation of the .zip , my atrix got stuck at the boot screen.
So i made the restore of the backup that I already made, and the smartphone starts ok.
After that i tried install other ROM , CM7-ICS-FINAL and I got the same stuck boot screen.
I found other Thread about that same problem, and the user found a solution but he forgot to post that solution, just wrote ''problem solve''.
Anyone know what can i make to install the ROM ? Thanks for your attention
blindox said:
Hello my friends.
I unlocked the BL and install the CWM. So i try to install a new ROM at my Atrix.
I made the installation of the Neutrino V1.4 GT, but after made the installation of the .zip , my atrix got stuck at the boot screen.
So i made the restore of the backup that I already made, and the smartphone starts ok.
After that i tried install other ROM , CM7-ICS-FINAL and I got the same stuck boot screen.
I found other Thread about that same problem, and the user found a solution but he forgot to post that solution, just wrote ''problem solve''.
Anyone know what can i make to install the ROM ? Thanks for your attention
Click to expand...
Click to collapse
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
+1
That would be my guess, the recovery.
ghost_og said:
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
Click to expand...
Click to collapse
yes use romracers recovery
and.wipe data
wipe cache
wipe dalvic.cache in advanced.options
Sent from my MB860 using Tapatalk
Thanks for all the support ! I will download the romracers recovery and retry install the new ROM!
ghost_og said:
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
Click to expand...
Click to collapse
live4nyy said:
+1
That would be my guess, the recovery.
Click to expand...
Click to collapse
ltdanno360 said:
yes use romracers recovery
and.wipe data
wipe cache
wipe dalvic.cache in advanced.options
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Be sure to let us know if it worked in case anyone else with the same issue can find the answer much easier.
blindox said:
Thanks for all the support ! I will download the romracers recovery and retry install the new ROM!
Click to expand...
Click to collapse
Hello my friends..
I made the install of the romracers recovery.. and i installed the ROM ( Neutrino ROM ).
But Now it gets to the boot up screen that says "Neutrino ROM ... system loading" the screen will black out for a couple seconds and then come right back to that screen in a loop. its been happening for about 15 minutes.
obs : I forgot to make the backup
Thanks for the help!
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
blindox said:
Hello my friends..
I made the install of the romracers recovery.. and i installed the ROM ( Neutrino ROM ).
But Now it gets to the boot up screen that says "Neutrino ROM ... system loading" the screen will black out for a couple seconds and then come right back to that screen in a loop. its been happening for about 15 minutes.
obs : I forgot to make the backup
Thanks for the help!
Click to expand...
Click to collapse
live4nyy said:
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
Click to expand...
Click to collapse
hello my friend,
i just made the WIPE CACHE AND WIPE DALVIK CACHE and the install of the ROM.
When i saw the screen NEUTRINO I was happy, until the time the ''system loading" getting black out for a couple seconds and then come right back. I knew there was something wrong.
Now I will make the process again with the factory data reset and then i will post what happened
Thanks
MY FRIEND..
thanks for all the support! I made the again the process with the factory reset and now the ROM is installed correctly.
Let me ask a question. I want to install a new kernel to try the overclock 1.3GHZ. That new kernel can be installed with the romracers ?
Thanks for the attention
**HAPPY NEW YEAR
live4nyy said:
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
Click to expand...
Click to collapse
Yes, romracer is recommended. It is the only recovery that is specifically developed for the Atrix 4G. You could also try the TRWP Recovery but romracer's recovery is proven to work well and recommended by most.
Glad everything worked out.
blindox said:
MY FRIEND..
thanks for all the support! I made the again the process with the factory reset and now the ROM is installed correctly.
Let me ask a question. I want to install a new kernel to try the overclock 1.3GHZ. That new kernel can be installed with the romracers ?
Thanks for the attention
**HAPPY NEW YEAR
Click to expand...
Click to collapse
Weird problem with my phone chaps, can you please help?
I can flash CM9 & CM10 with no issues. I can flash it via restore (CWM) or through a wipe.
I can flash CheckROM V4 Via ODIN with no issues, but I am unable to flash anything I download through the kitchen. I get a bootloop or it gets stuck at the Boot up Samsung logo.
Similarly, I am unable to flash any other ROM apart from CM9/CM10 via recovery. It gets stuck at the boot logo. I've wiped all the caches, and even tried to flash checkrom via Odin to see if this resolves the issues, but unfortunately not.
Is this a case of flashing an original Samsung ROM, then re-rooting and starting over?
I will be grateful if anyone can offer some assistance!
Are you doing a full wipe factory reset in recovery before flashing a ROM? you mentioned you wiped cache thats it
Sent from my GT-I9300 using xda premium
yldlj said:
Are you doing a full wipe factory reset in recovery before flashing a ROM? you mentioned you wiped cache thats it
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
yeah sorry mate
full factory
cache partition
and dalvik cache
Try reinstall cwm. See how it goes.
Sent from my GT-I9300 using xda app-developers app
If not just atart from scratch.
Sent from my GT-I9300 using xda premium
Arsaw said:
Try reinstall cwm. See how it goes.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
tried already
switched between touch recovery and the normal one
yldlj said:
If not just atart from scratch.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
looks like it
Its not hard doesnt take long at all.
Sent from my GT-I9300 using xda premium
Maybe Megawipe or Superwipe script can help. You can try it if you haven't gone with flashing original firmware.
Sent from my GT-I9300 using xda app-developers app
format system as well before flashing a new Rom
slaphead20 said:
format system as well before flashing a new Rom
Click to expand...
Click to collapse
damn just saw this
flashed a stock ROM and I am stuck on the samsung boot screen
any tips pleasE?
I've got the stock recovery on now, shall I flash a custom recovery, wipe system and start again??
Update: Used the stock recovery to wipe and its now booted
Flashed custom ROM - Criskelo and back to square one. Freezing at boot logo.
Any advice please guys
winwiz said:
damn just saw this
flashed a stock ROM and I am stuck on the samsung boot screen
any tips pleasE?
I've got the stock recovery on now, shall I flash a custom recovery, wipe system and start again??
Update: Used the stock recovery to wipe and its now booted
Flashed custom ROM - Criskelo and back to square one. Freezing at boot logo.
Any advice please guys
Click to expand...
Click to collapse
Start by following the instructions in full regarding a wipe first .
That does not work redownload the rom or try another rom .
jje
Suggest you try ARHD rom
Sent from my GT-I9300 using xda app-developers app
JJEgan said:
Start by following the instructions in full regarding a wipe first .
That does not work redownload the rom or try another rom .
jje
Click to expand...
Click to collapse
Thanks mate
so I did a system wipe, then installed a stock ROM, then rooted and the installed Omega ROM and it seems to be working now.
THanks for your help all!
My problem goes like this: The cwm installations goes fine, but when i boot, it will remain the same, like i didn't install it. Any help?
you mean you are booting in the old rom ?
or you are stuck at some white screen ?
or stuck in bootloop ?
follow proper procedure while flashing rom ....
wipe data / reset
wipe cache
format system
wipe dalvik cache
install zip from sd
wipe data
reboot
Sent from my GT-S5670 using xda premium
mathm2013 said:
My problem goes like this: The cwm installations goes fine, but when i boot, it will remain the same, like i didn't install it. Any help?
Click to expand...
Click to collapse
Mount system before installing
I don't know the reason, but after i changed from kernel (i was using hells fusion), i can flash all of them. Thanks!
mathm2013 said:
I don't know the reason, but after i changed from kernel (i was using hells fusion), i can flash all of them. Thanks!
Click to expand...
Click to collapse
Because it's inbuilt CWM mounts system by default
iamareebjamal said:
Because it's inbuilt CWM mounts system by default
Click to expand...
Click to collapse
Lol
You got him wrong.
He said he was facing the problem with hells fusion kernel and when he switched to another kernel, his problem got solved.
Sent from my GT-S5830i using xda app-developers app
I installed a zip through ClockworkMod I shouldn't of installed on my i9300 with CM10 and now it's stuck in the boot animation.
The zip I installed is a fix that supposedly added the option of selecting USB Mass Storage instead of MTP. Someone linked it from another thread and after installing it, I tried booting my phone but it got stuck, then I figured out that the zip was only for the Sony WT19i.
Here it is: http://forum.xda-developers.com/attachment.php?attachmentid=1532624&d=1354526908
Any way to fix this? I really don't want to factory reset
Best bet as you have flashed something that dont belong on your phone is to full wipe and Reflash your rom. Try a dirty flash but I would full format system and data and reflash. Lucky you didnt brick it mate.
I9100/I9300
Reflash rom
Sent from my GT-I9300 using Tapatalk 4
andrewwright said:
Best bet as you have flashed something that dont belong on your phone is to full wipe and Reflash your rom. Try a dirty flash but I would full format system and data and reflash. Lucky you didnt brick it mate.
I9100/I9300
Click to expand...
Click to collapse
I did a dirty flash of the latest CM10 build and surpringly, everything is exactly as I left it! Thanks for the help
If you flash anything that goes into /system and the rom breaks, reflashing the rom is all that's needed. Basic partition layout understanding.
Sent from my GT-I9300 using Tapatalk 4
Error503 said:
I did a dirty flash of the latest CM10 build and surpringly, everything is exactly as I left it! Thanks for the help
Click to expand...
Click to collapse
Ok mate but do read what @rootSU has put to as he knows what he talking about. Glad its working :thumbup:
I9100/I9300