Darkforest Kernel for the Xperia Play GSM/CDMA: Version 1
*************************************************************************************************************************************
Changelog:
Code:
[b]PLAY GSM[/b]
+ Added 2.0GHz overclock
+ Added Interactive CPU Governor from 3.0 kernel source
+ Added ClockworkMod Recovery v5.0.2.7 - back button when blue light comes on to enter
Code:
[b]PLAY CDMA[/b]
+ Added 2.0GHz overclock
+ Added ClockworkMod Recovery v5.0.2.7 - back button when blue light comes on to enter
- USE AT YOUR OWN RISK - I CANNOT AND WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE OCCURRED TO YOUR DEVICE -
Check next post for download and installation instructions
Sources:
https://github.com/DarkforestGroup/semc-2.6.32.9-darkforest
Download:
Darkforest Kernel GSM 2.0GHz
Darkforest Kernel CDMA 2.0GHz
Darkforest Kernel GSM 1.6GHz
Darkforest Kernel CDMA 1.6GHz
To flash, use the following command:
Code:
fastboot flash boot play.img
^^ replace play.img with play-cdma.img if you are flashing CDMA kernel.
WiFi modules do not need to be flashed as I kept the kernel string the same as the stock kernel, meaning stock WiFi modules can be used
If you are coming from DooMKernel, you will need to flash STOCK WiFI Modules, DooM has provided them on his topic
If you want to donate, I dont have paypal (yet) so instead you can click the thanks button
My sources are on github:
Xperia Play CDMA kernel sources: https://github.com/DarkforestGroup/semc-2.6.32.9-darkforest/tree/cdma
Xperia Play GSM kernel sources: https://github.com/DarkforestGroup/semc-2.6.32.9-darkforest
Cant wait, and are you really the owner of darkforest? forums brilliant
ff7fan4eva said:
Cant wait, and are you really the owner of darkforest? forums brilliant
Click to expand...
Click to collapse
Co-owner, there is me and one other owner there
KeiranFTW said:
Co-owner, there is me and one other owner there
Click to expand...
Click to collapse
OT
Cool, but please sort out the front page articles, grammar is quite bad
E.g on the article HTC: ICS Update Announced
Every Android user bothered about his version of android should know what ICS is, if not, it is Google’s newest version of the Android OS (4.0) and has many improvements over Gingerbread, not mentioning a total UI redesign!
That should be "Not to mention"
ff7fan4eva said:
OT
Cool, but please sort out the front page articles, grammar is quite bad
E.g on the article HTC: ICS Update Announced
Every Android user bothered about his version of android should know what ICS is, if not, it is Google’s newest version of the Android OS (4.0) and has many improvements over Gingerbread, not mentioning a total UI redesign!
That should be "Not to mention"
Click to expand...
Click to collapse
I wrote that one xD
have just added interactive governor from 3.0 kernel source, seems to run well
looking forward to this mate hope it will be awesome
faisaldante said:
looking forward to this mate hope it will be awesome
Click to expand...
Click to collapse
Just released, for next release will use second reserved post for GSM, third for CDMA and first for installation instructions and download links
just flashed it now keiran. flashed the darkforest rom last night and if the kernel's half as good as the rom i think you're onto a winner. very happy with the rom so far and i'll let you know how the kernel goes
tom
Hi keiran,
Great work m8. Is there any chance we could have a 1.6ghz version its just that my Xperia Play wont boot with the 2ghz its the same with doom lords kernal aswell it just stays on the boot screen.
Thanks
evo6 said:
Hi keiran,
Great work m8. Is there any chance we could have a 1.6ghz version its just that my Xperia Play wont boot with the 2ghz its the same with doom lords kernal aswell it just stays on the boot screen.
Thanks
Click to expand...
Click to collapse
It should still boot (I have the default CPU speed set at 1024MHz (1GHz) on the kernel) just don't overclock further than 1.6GHz.
I don't know how DooMLord made his 1.6GHz one because he has no source code for it.
Keiran
KeiranFTW said:
It should still boot (I have the default CPU speed set at 1024MHz (1GHz) on the kernel) just don't overclock further than 1.6GHz.
I don't know how DooMLord made his 1.6GHz one because he has no source code for it.
Keiran
Click to expand...
Click to collapse
Hi m8,
I'm not sure either but i cant even get in to the rom unless i boot the 1.6ghz version on DoomLords kernal. It just stays on the Sony Ericsson screen. I'll send a pm to doomlord see if he replys .
Thanks
evo6 said:
Hi m8,
I'm not sure either but i cant even get in to the rom unless i boot the 1.6ghz version on DoomLords kernal. It just stays on the Sony Ericsson screen. I'll send a pm to doomlord see if he replys .
Thanks
Click to expand...
Click to collapse
Cheers.
Still, try it just to see if it boots
Hi Keiran,
I did some searching on the forum and i think its because my Play cant handle 2ghz so it just hangs on boot screen. I tried your kernel and it did the same as the other 2ghz kernels. It must do some checks on the boot to see if the device can support it the different clocks.
Any chance you could make a kernel which can only clock up to 1.6ghz please.
Thanks
Maybe I'm doing something wrong but I was on DoomKernel. I flashed your Dark Forest Kernel to give it a whirl and everything works fine however now m Wifi does not work. It just says "error" next to it under settings. I flashed the stock kernel, then rebooted, then went back and reflashed the DarkForest Kernel and same thing. I do have a flashable zip for wifi modules I tried that and still the same, no wifi. Any ideas?
jgregoryj1 said:
Maybe I'm doing something wrong but I was on DoomKernel. I flashed your Dark Forest Kernel to give it a whirl and everything works fine however now m Wifi does not work. It just says "error" next to it under settings. I flashed the stock kernel, then rebooted, then went back and reflashed the DarkForest Kernel and same thing. I do have a flashable zip for wifi modules I tried that and still the same, no wifi. Any ideas?
Click to expand...
Click to collapse
You need to flash stock WiFi modules, you can find them on DooM's topic
Sent from my R800i using Tapatalk
Hi Keiran. Great work. Can you do a file system maintenance ext 2/3/4 in your great kernel for a2sd ?
sechko said:
Hi Keiran. Great work. Can you do a file system maintenance ext 2/3/4 in your great kernel for a2sd ?
Click to expand...
Click to collapse
Ext should already be enabled
Sent from my R800i using Tapatalk
Going to compile a 1.6GHz version tomorrow for GSM and CDMA.
Sent from my R800i using Tapatalk
Related
Been playing around with Kernel development and created an overclocked kernel for the 4.0.2.A.0 stock Rom.
There's nothing too speciall in it at the moment, but lets you overclock the Ray to 1.9Ghz using the source released by SE and the modified CPU steps that IF2 posted here: http://forum.xda-developers.com/showthread.php?t=1165355
There's no custom bootloader/Clockwork mod and no additional governers (at the moment) although I may add these in future as I learn more.
It seems to work well enough, and everything seems to be working as standard. I experience random lock-ups at 1.9 and occasionally 1.8Ghz, especially when it goes into/out of sleep when the screen turns off. Lower frequencies seem stable though.
This is released as-is, I'm using it myself but I can't be held responsible for any instabilities or failures you might experience. Just thought it might be of use to some people.
The new .img file can be downloaded from here: http://dl.dropbox.com/u/17615284/4.0.2.A.0-Overclock.img
To install just use fastboot in the usual way. To return to stock, extract kernel.sin from the official update image using WinZip/WinRar etc and flash using fastboot again.
Thanks a lot hartej !
Just flashed it, seems to work as described. I OC to 1.4 Ghz
Will report back if there is any issue.
Looking forward for additional CPU governors, insecure kernel, autoroot and clockwork recovery
Thanks again for your hard work
piflechien said:
Looking forward for additional CPU governors, insecure kernel, autoroot and clockwork recovery
Click to expand...
Click to collapse
That's the plan eventually, but still just learing the ropes so don't expect all that by tomorrow Glad I could help.
Thanks for the efforts. I set up to 1.3 Ghz and so far so good.
glad to see u finally posting this
my latest sources are pushed to:
https://github.com/DooMLoRD/Xperia-2011-Kernel-2.6.32.9
enjoy!
DooMLoRD said:
glad to see u finally posting this
my latest sources are pushed to:
https://github.com/DooMLoRD/Xperia-2011-Kernel-2.6.32.9
enjoy!
Click to expand...
Click to collapse
Finally? Cheeky buggar!
Not really had any time unfortunately due to work, but if you've updated the defconfig for the Ray I might have a bash at your sources in the morning (still don't understand them!)
Thanks again though - if it wasn't for your help and the fact you stopped developing for the Ray I'd never had started playing about with kernels myself!
hartej said:
Finally? Cheeky buggar!
Not really had any time unfortunately due to work, but if you've updated the defconfig for the Ray I might have a bash at your sources in the morning (still don't understand them!)
Thanks again though - if it wasn't for your help and the fact you stopped developing for the Ray I'd never had started playing about with kernels myself!
Click to expand...
Click to collapse
hehe... no defconfigs are only updated for ARC & PLAY... i wont be updating defconfigs for other devices... though u can easily figure out the additions to be done
if u need any help send me p.m./gtalk
DooMLoRD said:
hehe... no defconfigs are only updated for ARC & PLAY... i wont be updating defconfigs for other devices... though u can easily figure out the additions to be done
if u need any help send me p.m./gtalk
Click to expand...
Click to collapse
Will do - thanks again for your help
It could be a good idea to move this thread in the newly created subforum dedicated to the Ray: http://forum.xda-developers.com/forumdisplay.php?f=1351
Can you also make a kernel for cm7 with some other governors like Doomkernel's one but for fxp043. Thanks in advance
I've created a new thread in the Ray forum as I don't think I can move this one without being a mod: http://forum.xda-developers.com/showthread.php?p=18829345
nos1609 said:
Can you also make a kernel for cm7 with some other governors like Doomkernel's one but for fxp043. Thanks in advance
Click to expand...
Click to collapse
This is all pretty new to me, so don't expect too much too fast!
In future I may look at CM7 images but currently I'm on the stock firmware (at least until the flash in CM7 is fixed) and as I have to use the phone daily I'm not prepared to switch between firmwares to be developing for different sources at this time.
I've been using CM7 on my other devices (HTC Desire and ZTE Blade) so will most likely switch to it when some of the bugs have been worked out.When this happens I'll look at the CM7 Kernel.
This is a repackaging of DooMLoRD's kernel for the Ray - this is only for the stock Rom at this time, and will not work on MIUI or CM.
It's based on DooMLoRD's Github sources, original thread with more information about the Kernel is here: http://forum.xda-developers.com/showthread.php?t=1172885 - all thanks should go to him, I've edited very little, simply changed some of the config to suit the Ray and tested it.
Brief summary:
* Overclockable to 2GHz (set at 1GHz to start - made sure of it this time!)
* Enabled most of the schedulers so you can choose your favourite (brazillianwax, smoothass, SavagedZen, interactiveX, lagfree, minmax, Scary, smartass, interactive, conservative, ondemand, userspace, powersave, smartassV2, performance).
[UPDATE]
Had a look at the issues with the 'Flash' on the camera not working - this is now fixed.
Also, after being requested by a couple of people I've recompiled it for MIUI - you'll have to flash the second version for it to boot. (Please choose the correct one, flashing the wrong one will let you access CWM-recovery, but the system won't boot.) MIUI isn't working at this time.
Updated Kernel can be found here for Stock Roms:
http://dl.dropbox.com/u/17615284/DoomKernel-2011-12-28-1201.img
[Edit] Kernel for MIUI booted, but became unresponsive after it's been on a while. Taken the link down until I can find a day or two where I'm not using my phone so I can flash MIUI myself and look into it.
Thank you very much for this good present !
I just would ask if it is compatible with bheremans' MIUI rom, and if it's not if someone can port it, or explain to me how it can be done.
hartej said:
Brief summary:
* Overclockable to 2GHz (set at 1GHz to start - made sure of it this time!)
* Enabled most of the schedulers so you can choose your favourite (brazillianwax, smoothass, SavagedZen, interactiveX, lagfree, minmax, Scary, smartass, interactive, conservative, ondemand, userspace, powersave, smartassV2, performance). Think I may have missed a few - shall go back and check when I get a chance.
* Can't remember if I managed to get it working with the latest Ramdisk or not. At one point I was using it with a previous Ramdisk but not sure if I eventually got it working... (Currently the CMW Recovery is version 5.0.2.7?) I'll have to check on this, if it's using an old RamDisk then some of the features may not be available.
Initial release - I've been using it for a day now and it seems quite stable.
http://dl.dropbox.com/u/17615284/RayDoomKernel-2011-12-18.img
Click to expand...
Click to collapse
Can you integrate in the kernel the dual mode call recording ability, please?
aragog53 said:
Thank you very much for this good present !
I just would ask if it is compatible with bheremans' MIUI rom, and if it's not if someone can port it, or explain to me how it can be done.
Click to expand...
Click to collapse
No idea, I think that MIUI, CM7 and Stock Roms require different Kernels (or some serious customisation) so i'd be guessing: No. But it's just a guess.
Tistitus said:
Can you integrate in the kernel the dual mode call recording ability, please?
Click to expand...
Click to collapse
DooMLoRD added this to his Kernel, but I don't have any requirement to record my calls so can't confirm if it's working or not. Feel free to test it out - you may find yourself in luck!
Bah! Uploading failed the first time, but it's fixed now.
If you downloaded the file before I posted this, and only have a 1.2MB file then please DONT FLASH IT. It shouldn't mess anything up permanantly but your device won't boot.
I've uploaded the file again (to the same location), please re-download and flash this one (it should be just over 6MB)
Please make it compatible for miui?;D.......
Sent from my ST18i using Tapatalk
Hi hartej glad to see you back on the forum
A have quick question, how can be repaired this problem: http://code.google.com/p/android/issues/detail?id=3708 DooMLord may be able to help you repair it? Or will show some tips
Sorry for double post...i had found a way to port to MIUI...take a look here hartej..)
bheremans said:
Rom by iriijo
To port kernel : nothing special, just compile it with :
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
and
CONFIG_PAGE_OFFSET=0xC0000000
Click to expand...
Click to collapse
Sent from my ST18i using Tapatalk
Hi Hartej, sorry but even with your second upload. The kernel doesn't boot. It stays at black screen (not even the SE logo)
@hartej: some notes ...
thinking its a good choise using DooMLoRD's kernel as your base, congratulations for your wise decision
some minutes befor i fastboot'ed (temporarly) your image (i.e. fastboot boot <image>)
# kernel cpufreq defaults is ondemand 245760/1862400Hz - no max 1GHz as you'r thinking?
some LITTLE change-requests from me - please
# /proc/config.gz support - a great help for every self-builder
# init.d support - importent i'm thinking, i modifyed init.semc.rc in initrd.img in your boot image for myself (serves only as a example)
service sysinit /system/bin/logwrapper /system/xbin/busybox run-parts /system/etc/init.d
user root
oneshot
# a git respository of your kernel for self builder
ok, thats all for NOW, thank you for your good work.
greetings
Doesn't boot
I've downloaded your present(RayDoomKernel-2011-12-18.img / 6.23MB) and flash it on my Ray with fastboot tool. But it doesn't boot, just shows me black screen.(Not even show me SE logo ) Anyway I appreciate your great effort.
is it for stock 4.0.2.0.A.42 firmware
Oh I tried.Doesn't boot with the 4.0.2.A.042 FW.
@hartej
glad to see u back on this
some devices cant handle 1.6Ghz+
thats why i keep 2 kernels
2.0Ghz
and
1.6Ghz
for other things u can check my kernel-ramdisk
SWDJPA said:
I've downloaded your present(RayDoomKernel-2011-12-18.img / 6.23MB) and flash it on my Ray with fastboot tool. But it doesn't boot, just shows me black screen.(Not even show me SE logo ) Anyway I appreciate your great effort.
Click to expand...
Click to collapse
masray said:
Oh I tried.Doesn't boot with the 4.0.2.A.042 FW.
Click to expand...
Click to collapse
Lol, I'll upload the right one eventually! Just tried downloading and flashing this myself, only to discover that I'd mistakenly uploaded the latest version instead of the working one. Still playing with getting the ARC ramdisk working with the Ray, possibly because of the speed issue DooMLoRD quotes above which is the reason for the black screen - the Kernel itself is identical, it's just a difference in the RamDisks.
I've uploaded the working one now - sorry for any confusion!
http://dl.dropbox.com/u/17615284/DoomKernel-2011-12-18-1547.img
hartej said:
Lol, ... I've uploaded the working one now - sorry for any confusion!
http://dl.dropbox.com/u/17615284/DoomKernel-2011-12-18-1547.img
Click to expand...
Click to collapse
i'll testet it shortly, now it boot in ondemand 245760/1024000Hz und init.d support works too - super
one questions leaves ...
i want to compile myself. where to get your changes for the ray (.config mainly ???), when i use DooMLoRD's cloned git sources ???
thanks and have i nice day ...
hartej said:
Lol, I'll upload the right one eventually! Just tried downloading and flashing this myself, only to discover that I'd mistakenly uploaded the latest version instead of the working one. Still playing with getting the ARC ramdisk working with the Ray, possibly because of the speed issue DooMLoRD quotes above which is the reason for the black screen - the Kernel itself is identical, it's just a difference in the RamDisks.
I've uploaded the working one now - sorry for any confusion!
http://dl.dropbox.com/u/17615284/DoomKernel-2011-12-18-1547.img
Click to expand...
Click to collapse
Please for MIUI ??
Works Great
Two thumbs up!
It is quite stable even at 2ghz.
But I would stay at 1.5 with smartass v2 considering battery life.
Thank you
-Ray User from Korea.
doesn't work with FXP050 on my Ray ... It does boot into the system but it doesn't show any submenus or option menus ... they are there, i can select by where i remember them to be but it is not graphicly shown
This Kernel is for STOCK Rom !!!! not for cyanogen mod.
v2 Released. Scroll down for info!
Hello,
After lots of help from sirkay and FXP, I've built my own kernel that I thought I'd share with you.
This kernel wouldn't exist without the hard work of FXP. This is built from his source code. All real credit for this belongs with him (and DoomLord too, also an FXP Team member)
That said, this is my take and keeps the rather awesome release that is CM7.2 alive!
To be clear: This is a kernel for Cyanogen Mod 7.2 - Gingerbread! If you want a good ICS Kernel look at Sirkay's Thread.
So, what's different?
Uses a very recent GCC to compile, GCC version 4.6.3 which I optimised the build for Cortex-a8 and NEON.
Is compiled for performance not size (Optimize for size unticked)
Heap Randomisation is disabled.
Enabled SWAP - So you can use swap if you want to...
Default Scheduler changed to deadline, same as the Sony official kernel (still has bfq if you want to use it)
Default governor changed to ondemand.
CONFIG_OABI_COMPAT turned off. (This might break apps, haven't found any yet though)
Disabled CPUFreq Debugging.
Disabled FRAME_POINTERS, enabled STACK_UNWIND. Reason here: http://lists.openmoko.org/nabble.html#nabble-td6126708
There is no boot logo when this kernel boots. Each time I added one, the kernel refused to boot. I'll look at that. Just have patience, your phone is booting still...
(Here's where I make lots of stupid claims about how smooth, how buttery, how much battery life this kernel saves. Except I'm not a screaming idiot, so I'm not going to do that!)
I'm interested in any feedback you have, but I did this mostly for me.
And please remember the real person to thank, FXP. It's his source code I've used to build this. Also again thanks to Sirkay for his help and pointers.
Download it from here.
- muppet
Nice Kernel what's battery performance ??
aditya080908 said:
Nice Kernel what's battery performance ??
Click to expand...
Click to collapse
About the same as every other kernel.
OTG support? ?!
Sent from my ST18i
so good, This is what I looking for
@muppetmania attach here you png file. i can try to convert it to .rle for you
Could GB MIUI have the privilege?
Could we have a CM7 based MIUI 2.3.7 kernel?
I think GB MIUI works just fine and don't want to upgrade to ICS or JB.
But a better kernel for GB MIUI is always appreciated.
Thanks in advance,pls let us know if you'd be willing to.
Anoopnk said:
OTG support? ?!
Click to expand...
Click to collapse
If you'd like me to respond to questions, please post an actual articulate question in the first place. Cheers.
Yes, I'm aware I'm a ****, it's been pointed out to me already
sirkay said:
@muppetmania attach here you png file. i can try to convert it to .rle for you
Click to expand...
Click to collapse
Thanks sirkay, but the problem isn't that I can't make a rle file, it's that the rle file when added to the ramdisk stops the kernel booting. It seems to a bug in the SEMC loader, I found a post about it somewhere. Does the boot.img need to be padded out to a certain size to work?
Sometimes my logo.rle would work, but then I'd make changes, recompile, and the kernel would hang on boot. Annoying, so I've removed it for the moment.
rivtre said:
Could we have a CM7 based MIUI 2.3.7 kernel?
I think GB MIUI works just fine and don't want to upgrade to ICS or JB.
But a better kernel for GB MIUI is always appreciated.
Thanks in advance,pls let us know if you'd be willing to.
Click to expand...
Click to collapse
Hi rivtre,
I'd love to help, but my Ray is the only phone I have and is running CM7.2. While I could make a kernel for MIUI I'd have no (easy) way to test it. It wouldn't be fair to anyone if I started releasing untested things. So I'm sorry, it's not that I don't want to help, but no. Anyway, read the next bit to see why that's probably not a bad thing!
To All:
My kernel seems to be terrible when it comes to HD video recording. Can anyone else test this? I get heaps of dropped frames using my kernel when recording HD video vs a FXP Stock kernel. I need to look more at this, but for the moment I'd recommend not using this kernel!
v2 Released!
Version 2 of muppet kernel released.
What's new?
Compiled with GCC 4.7.1
Reverted to BFQ Scheduler by default
Reverted to Interactive CPU Scaling by default
Added logo.rle so you know it's booting!
Removed Debugging Symbols (CONFIG_KALLSYMS)
Reverted the scheduler and CPU scaling as they seemed to be the cause of the video recording lag.
Enjoy!
Download
does the kernel also work with this rom http://forum.xda-developers.com/showthread.php?t=1424121?
can I flqsh the kernel with flashtool?
is overclocking possible?
borg17a said:
does the kernel also work with this rom http://forum.xda-developers.com/showthread.php?t=1424121?
can I flqsh the kernel with flashtool?
is overclocking possible?
Click to expand...
Click to collapse
Not sure if it works with the stock ROM or not - try it and report back.
Yes, like all kernel images, you can flash it with Flashtool.
You can OC up to 1.6Ghz.
I tried it, but It doesn't work. Booting failed
muppetmania said:
Not sure if it works with the stock ROM or not - try it and report back.
Yes, like all kernel images, you can flash it with Flashtool.
You can OC up to 1.6Ghz.
Click to expand...
Click to collapse
borg17a said:
I tried it, but It doesn't work. Booting failed
Click to expand...
Click to collapse
Oh well sorry. It's only for CM7.2
muppetmania said:
Version 2 of muppet kernel released.
What's new?
Compiled with GCC 4.7.1
Reverted to BFQ Scheduler by default
Reverted to Interactive CPU Scaling by default
Added logo.rle so you know it's booting!
Removed Debugging Symbols (CONFIG_KALLSYMS)
Reverted the scheduler and CPU scaling as they seemed to be the cause of the video recording lag.
Enjoy!
Download
Click to expand...
Click to collapse
Just flashed your kernel, going to give a test run! thanks!!
Edit:
Well it doesn't seem to me that the camera recording works at all ... pictures = fine - but when trying to record video - the image freezes - and the camera app crashes.
I have to reboot to get back into the camera app...
Also, can't play any video I previously recorded...
Anything I'm missing?
I've flashed your kernel and did a cache + dalvik wipe...
Cheers!
Apocalyps2 said:
Just flashed your kernel, going to give a test run! thanks!!
Edit:
Well it doesn't seem to me that the camera recording works at all ... pictures = fine - but when trying to record video - the image freezes - and the camera app crashes.
I have to reboot to get back into the camera app...
Also, can't play any video I previously recorded...
Anything I'm missing?
I've flashed your kernel and did a cache + dalvik wipe...
Cheers!
Click to expand...
Click to collapse
Oh, well that's not the sort of feedback I wanted!
I haven't done much video recording the last couple of weeks (I've been away from work)
Let me do some testing and see what I can find...
Thanks for reporting
If you want a logcat I'll make one and get it to you , cheers
Sent from my ST18i using xda app-developers app
GPS
i just install your kernel on my phone...but why my GPS cannot running well
a1nx said:
i just install your kernel on my phone...but why my GPS cannot running well
Click to expand...
Click to collapse
why your bug reporting so terrible
a1nx said:
i just install your kernel on my phone...but why my GPS cannot running well
Click to expand...
Click to collapse
Update baseband to 75 or 77 ...reflash kernel !!!
Have fun !!
Sent from my ST18i
Features:
Don't need modules, everything included in the kernel
Init.d script support (Requires busybox in xbin)
Lulzactive, Hotplug, SmartassV2 governors
SIO, VR schedulers
Avaliable CPU frequencies: 98MHz, 196MHz, 320MHz, 480MHz, 600MHz, 800MHz, 1GHz, 1,2GHz, 1,4GHz
Default max CPU frequency: 1GHz (600MHz when screen is off)
Default min CPU frequency: 98MHz
Requirements:
Unlocked bootloader
Fastboot
Download:
http://rapidgator.net/folder/1552230/protoukernel.html
Install:
Boot to bootloader
Install the kernel with fastboot: "fastboot flash boot 'kernelname'.img"
Reboot and enjoy!
Sources:
https://github.com/atis112/htc_kernel_protou
Changelog:
v2:
Init.d support
SIO, VR scheduler
New CPU freq table with overclock
v1:
Based on 1.18.980.3
Don't use modules, all features included to the kernel
Lulzactive, hotplug and smartassV2 governors added
Wow! Nice work!
Do you mind if I add this in my ROM? And does it have init.d support?
MaartenXDA said:
Wow! Nice work!
Do you mind if I add this in my ROM? And does it have init.d support?
Click to expand...
Click to collapse
I didn't edit the ramdisk yet, but i will add init.d support in next version.
I don't mind it. Just don't forget credits.
atis112 said:
I didn't edit the ramdisk yet, but i will add init.d support in next version.
I don't mind it. Just don't forget credits.
Click to expand...
Click to collapse
Oh, then I'll wait for next version before I add it in my ROM
Anyways, this is great! Great to have yet another developer in the DX section
And we finally got a custom kernel for DesX.
Thanks man, added to Index.
Re: [KERNEL]Tweaked kernel 1.0[10/02/2013]
Hot diggity! A new kernel!!!! Awesome! We can over clock with this, right? Not that I'll over clock, just to ask
Sent from my HTC Desire X using xda app-developers app
Stereo8 said:
Hot diggity! A new kernel!!!! Awesome! We can over clock with this, right? Not that I'll over clock, just to ask
Sent from my HTC Desire X using xda app-developers app
Click to expand...
Click to collapse
Not yet. But i can make overclocked kernel later. But i think 1ghz dual-core is enough for ics.
I think that greater number governors and schedulers are more important than overclocking, you're 100% right with speed for ICS and even JB.
Re: [KERNEL]Tweaked kernel 1.0[10/02/2013]
nlooooo said:
I think that greater number governors and schedulers are more important than overclocking, you're 100% right with speed for ICS and even JB.
Click to expand...
Click to collapse
Yea, I hate overclocking, but just for the reference...
Sent from my HTC branded muffin...
720 p recordings
Great work and a great contribution to hdx community...
A req! Can u plz add 720p recording in next ver.
madhavagg16 said:
Great work and a great contribution to hdx community...
A req! Can u plz add 720p recording in next ver.
Click to expand...
Click to collapse
not a kernel feature requires correct media codecs.
Edit : @Dev congrats First custom kernel for this device(max safe oc for this processor is 1.2 GHz just saying) also a request can you add ROW IO sheduler heard its better than SIO also PegasusQ/D governer.In next release.
Thank you.
hi
atis112 said:
I didn't edit the ramdisk yet, but i will add init.d support in next version.
I don't mind it. Just don't forget credits.
Click to expand...
Click to collapse
my work on cm10 boot was stuck on ramdisk issue. i posted a last_kmsg which showed that kernel booted but ramdisk had issues.
i dont understand kernel issues very well, but hope to get it working now that you are here. i'll ask for ur help from time to time.
plus, i want to take permission to use ur kernel tree for building cm9/10 from source. dont wanna use prebuilt now.
last thing, what is the difference between an ics n jb kernel, exactly what needs to be modified to make it work?....
thanks
neXus PRIME said:
my work on cm10 boot was stuck on ramdisk issue. i posted a last_kmsg which showed that kernel booted but ramdisk had issues.
i dont understand kernel issues very well, but hope to get it working now that you are here. i'll ask for ur help from time to time.
plus, i want to take permission to use ur kernel tree for building cm9/10 from source. dont wanna use prebuilt now.
last thing, what is the difference between an ics n jb kernel, exactly what needs to be modified to make it work?....
thanks
Click to expand...
Click to collapse
Ramdisk(sorry couldnt resist) among other things but for initial booting ramdisk.
PS might not be the best person to answer though...
Re: [KERNEL]Tweaked kernel 1.0[10/02/2013]
Dark Passenger said:
not a kernel feature requires correct media codecs.
Edit : @Dev congrats First custom kernel for this device(max safe oc for this processor is 1.5GHz just saying) also a request can you add ROW IO sheduler heard its better than SIO also PegasusQ/D governer.In next release.
Thank you.
Click to expand...
Click to collapse
Qualcomm S4 Play is made for speed 1-1.2GHz, and that's the safe range of frequencies. Remember that this is ARM-cortex A5 not Krait, and more than 1.2 can really harm it.
hi
Dark Passenger said:
Ramdisk(sorry couldnt resist) among other things but for initial booting ramdisk.
PS might not be the best person to answer though...
Click to expand...
Click to collapse
I know ramdisk, but let me rephrase my question, what exactly (in ramdisk) needs to be modified and how, to make it work on jb. Anyways, i'm still figuring things out by trial n error so progress is very very slow. The logcat was the only thing i ever got to which showed the cm10 logo as well but then, everything MESSED up. Havent been able to replicate that result since.
Re: [KERNEL]Tweaked kernel 1.0[10/02/2013]
Can you include this?? http://forum.xda-developers.com/showthread.php?p=37683529
Sent from my HTC branded muffin...
neXus PRIME said:
my work on cm10 boot was stuck on ramdisk issue. i posted a last_kmsg which showed that kernel booted but ramdisk had issues.
i dont understand kernel issues very well, but hope to get it working now that you are here. i'll ask for ur help from time to time.
plus, i want to take permission to use ur kernel tree for building cm9/10 from source. dont wanna use prebuilt now.
last thing, what is the difference between an ics n jb kernel, exactly what needs to be modified to make it work?....
thanks
Click to expand...
Click to collapse
The difference isn't just in ics and jb. the difference is in cm and sense ramdisk too. I don't know what need modify yet, but i will start the work with cm later when i have enough free time.
Feel free to use my sources.
nlooooo said:
Qualcomm S4 Play is made for speed 1-1.2GHz, and that's the safe range of frequencies. Remember that this is ARM-cortex A5 not Krait, and more than 1.2 can really harm it.
Click to expand...
Click to collapse
my bad edited.seems mixed it up.
So happy to hear such good news for the DesireX! Finally the developing for this device is becoming richer first of all, thank you for this custom kernel and thanks nexus prime for his effort to port the CM series I'm not an expert but yeah, sense and AOSP/AOKP Roms need different kernels. To learn more I think that Dennis Rassmann (the creator of the famous Bricked kernel series) or faux can answer your question about ramdisk, if you contact them (they are really kind and gentle). After that I would like to ask if it's possible to add the useful sweep2wake function to this kernel, in future. For now, good work guys, never give up!!!
Thanks to XperiaSTE team for the overclock kernel source first. I just did the config and compile but nothing else.
This kernel will overclock your device to 1.15GHz. The overclocking will provide a better performance and a smoother user experience.
I'm using a kexec multiboot kernel on my device, so I didn't test the kernel packed as elf format. It should be good because I have done flashing the self-built kernels several times.
The overclock source doesn't seems to be the latest but everything works~ Maybe that's because the modules in initramfs? (I did nothing to initramfs)
It's nearly impossible for me to upload the kernel on something like devhost/mediafire, so sorry for that. Could someone upload it on these sites please?
V2 Changelog:
1) Use GCC 4.9 Linaro to compile.
2) Change the SLQB allocator to SLUB. I don't really think SLQB is stable.
3) use 2G/2G user/kernel split. It seems to have a better performance.
4) PID namespace
5) NOTE:NO recovery in V2! Instead of recovery, the kexec multiboot menu by @percy_g2 is added. Big thanks to percy_g2. For how to use it, see Link:http://forum.xda-developers.com/xperia-u/p-development/kexec-multi-boot-menu-t2647623
* To enter boot menu you should press the power key when vibrate
V2 Link: http://pan.baidu.com/s/1mgt82V2
V1(Stable) Link: http://pan.baidu.com/s/1kTyul07
Finally, sorry for my poor English
Hope you like the kernel~
zhy0919 said:
Thanks to XperiaSTE team for the overclock kernel source first. I just did the compile but nothing else.
This kernel will overclock your device to 1.15GHz. The overclocking will provide a better performance and a smoother user experience.
I'm using a kexec multiboot kernel on my device, so I didn't test the kernel packed as elf format. It should be good because I have done flashing the self-built kernels several times.
The overclock source doesn't seems to be the latest but everything works~ Maybe that's because the modules in initramfs? (I did nothing to initramfs)
It's nearly impossible for me to upload the kernel on something like mediafire, so sorry for that
Link: http://pan.baidu.com/s/1kTyul07
Finally, sorry for my poor English
Hope you like the kernel~
Click to expand...
Click to collapse
hi, first of all big thanks for the kernal!!
can u provide a changelog or something like that to show the difference between cm11 kernal and your kernal ???
is overclock the only added feature in this kernal?
thanks and i wish you support more!!!
vicky2131 said:
hi, first of all big thanks for the kernal!!
can u provide a changelog or something like that to show the difference between cm11 kernal and your kernal ???
is overclock the only added feature in this kernal?
thanks and i wish you support more!!!
Click to expand...
Click to collapse
Thanks for your support!
by doing diff -u to the two xperiap_defconfig, the configs seem to be same.
So XperiaSTE did nothing more to the overclocked kernel.
therefore the config isn't changed and the only change is in the code.
Doing diff to the whole source tree will take much time so i didn't do it
By the github commit the changes seem to be all related to overclocking.
https://github.com/XperiaSTE/android_kernel_sony_u8500
you can read cm-11.0 and overclock branches's commits
Omg, finally oc kernel for cm11! Can i use this kernel for miui v5 kk 4.4.4 by kosmos?
kopter3161 said:
Omg, finally oc kernel for cm11! Can i use this kernel for miui v5 kk 4.4.4 by kosmos?
Click to expand...
Click to collapse
CM11Overclock_Fandroid-MIUI https://yadi.sk/d/kn4Gv5wXaP7Qj
Is this kernel stable? And can I use this in Europe?
Thanks for the kernel!
Just a suggestion for anyone thinking about flashing it right away:
Wait a couple of days/weeks for someone to do some testing, you could fry your motherboard (happened to me on my previous 2 phones).
I'm not saying this kernel will do that, but it's just a precaution.
mrdjibrilo said:
Thanks for the kernel!
Just a suggestion for anyone thinking about flashing it right away:
Wait a couple of days/weeks for someone to do some testing, you could fry your motherboard (happened to me on my previous 2 phones).
I'm not saying this kernel will do that, but it's just a precaution.
Click to expand...
Click to collapse
using from mornin!!!
no issues!!
vicky2131 said:
using from mornin!!!
no issues!!
Click to expand...
Click to collapse
It's a small time period, understand me please
I was running OC kernels on my previous phones and the motherboard frying happend months after use,
I'm not saying that this is the situation with this specific kernel, these are just my previous experiences,
and it was just to warn people
I had ever used panthom kernel on stock jb, it used 1.15ghz too but still safe used for a long time..
thanks for the great work.but how to install multi rom on our phones?
If anyone has a problem downloading the kernel from baidu, I have made a mirror on dropbox:
https://www.dropbox.com/s/gxuw8o8jtllzmfi/CM11Overclock_Fandroid.elf?dl=0
Ofcourse with the permission from the developer
Can someone please explain steps for installing multiroms? Can I use cm11 along with cm10?
Would the existing cm10 need to be reinstalled?
I've given link in the thread
No reinstalling is needed
Sent from my Xperia P using XDA Free mobile app