I got the neo hybrid in reventon yellow and my friend wants 1 in tender blue but the only 1 I've seen is a chinese knockoff. Will the tender blue I9000 case fit on the at&t I777 ? I think they are the same case the only difference is the screen protector that comes with it
Sent from my SAMSUNG-SGH-I777 using XDA App
They have like 17 in stock from the US Store.
http://www.amazon.com/SGP-Samsung-G...=A2SFKRF5TPZMT5&ie=UTF8&qid=1324365433&sr=1-3
Not sure if you were looking at eBay or from the main site that lead to Amazon, but that's what I got from it. And I'm pretty sure if there was a i9000 case it wouldn't fit, unless you meant the i9100. ;D
But from what I've read from different threads: they're all from the i9100 and they just change the screen protector, not the actual case.
roa57 said:
They have like 17 in stock from the US Store.
http://www.amazon.com/SGP-Samsung-G...=A2SFKRF5TPZMT5&ie=UTF8&qid=1324365433&sr=1-3
But from what I've read from different threads: they're all from the i9100 and they just change the screen protector, not the actual case.
Click to expand...
Click to collapse
That's exactly what they did. At least it works with our phone though other than the hole at the top being covered.
PatriotXT92 said:
That's exactly what they did. At least it works with our phone though other than the hole at the top being covered.
Click to expand...
Click to collapse
Does that come with the i777 screen protector?
unitedsgcorp on ebay sells it in blue too. Mine came in under a week from Sgpstore1 on ebay.
Just looking to get him the blue case with i777 screen protector.
Edgarhighman said:
Does that come with the i777 screen protector?
unitedsgcorp on ebay sells it in blue too. Mine came in under a week from Sgpstore1 on ebay.
Just looking to get him the blue case with i777 screen protector.
Click to expand...
Click to collapse
Assuming its the one that's "made" for our phone it should come with the screen protector but I can't tell you for sure. Worst case you can buy the screen protector separate knowing it will be the right one and return it if the case did come with the right one.
Sent from my GT-I9100 using xda premium
this is not a good case. when the phone warms up, the rubber expands and it feels like a loose shirt. It eventually stretches out permanently too and looks like ****.
the Rearth Slim is the best minimal case out there.
my 2 cents
33t said:
this is not a good case. when the phone warms up, the rubber expands and it feels like a loose ****. It eventually stretches out permanently too and looks like ****.
the Rearth Slim is the best minimal case out there.
my 2 cents
Click to expand...
Click to collapse
I have no play on the rear of my case. What you do to get it that hot? its not rubber, its silicone.
I set my phone to lower the CPU etc. when it gets 45.2 celc or 112 far
Phone warm up sometimes. How long you had it?
Sent from my SAMSUNG-SGH-I777 using XDA App
Got the phone Nov 27, I've had the case maybe 2 -3 weeks
Sent from my SAMSUNG-SGH-I777 using XDA App
Related
I know the AT&T version of the SII is the closest to the european model. The only case I find attractive is the genuine mesh case:
http://www.youtube.com/watch?v=fGOGthJy_ZE
Any idea if this case would fit the AT&T model?
Thanks!
The International version specs : 125.3 x 66.1 x 8.49 mm
AT&T version : 126 x 66 x 9 mm.
You really don;t need a case for this device. Its so slim and the back cover is readily available if one screws it up. Mine separated from removing it to switch out batteries. Then again I don;t use screen protectors either. I like hoe slick it is and the glass is really hard to mess up.
tbong777 said:
You really don;t need a case for this device. Its so slim and the back cover is readily available if one screws it up. Mine separated from removing it to switch out batteries. Then again I don;t use screen protectors either. I like hoe slick it is and the glass is really hard to mess up.
Click to expand...
Click to collapse
I agree gorilla glass is amazing I beat up my captivate. Only reason for me to get a case is if said case has a kick stand to prop up phone for movies
Sent from my SAMSUNG-SGH-I777 using XDA App
don't do it
The problem is that case leaves the corners exposed...I bought one for my international i9100
I bought the following...
http://www.ebay.com/itm/Samsung-Genuine-Galaxy-S2-i9100-SII-Mesh-Hard-Case-NEW-/180723707360?pt=PDA_Accessories&hash=item2a13f8ede0
I dropped the phone on the floor. It hit the corner and CRACK no more display. Beautiful case though...
The Official Mesh case is the only case I want to get for this device and I don't know if they will make an AT&T compatible one... It would be very nice if they did.
just chiming in..
got the black mesh case for my AT&T model.. doesn't fit..
so close but no cigar. It really is a nice case though!
Mesh case that fits i777
I have all of the following mesh cases.
These do NOT fit the Samsung Galaxy S2 i777 (AT&T):
http://www.ebay.com/itm/190577180423
http://www.amazon.com/gp/product/B0056G07Z6
This one kind of fits:
http://www.ebay.com/itm/180715368559
The fit isn't exactly perfect, but it's good enough. The texture is really nice - slightly tacky. The nice thing about this case is that the corners cover a little more of the phone than the other ones do, which should protect it a little better that the other ones. Just make a hole for the second microphone near the top, and you're good to go.
EDIT: The above case develops a crack with a few days within a few days of use. I cannot recommend it.
This case does fit perfectly:
http://www.ebay.com/itm/320701889899
but, the top and bottom of the phone are fully exposed, and there is really no protection for the front. If you want a case to prevent scratches to the back of your phone, then this will work. If you want a case to protect your phone when you drop it, this won't protect your phone in the most vulnerable places for damage - the corners.
wified said:
I have all of the following mesh cases.
These do NOT fit the Samsung Galaxy S2 i777 (AT&T):
http://www.ebay.com/itm/320701889899
http://www.ebay.com/itm/190577180423
http://www.amazon.com/gp/product/B0056G07Z6
This is the only one that fits:
http://www.ebay.com/itm/180715368559
The fit isn't exactly perfect, but it's good enough. The texture is really nice - slightly tacky. The nice thing about this case is that the corners cover a little more of the phone than the other ones do, which should protect it a little better that the other ones. Just make a hole for the second microphone near the top, and you're good to go.
Click to expand...
Click to collapse
Looks the same as the eBay ones. But you say it does fit? As in the entire rim of the phone is in the case without one side being favored?
Just curious because I love the mesh case but this one for the i9100 does not fit my phone (ATT version)
Sent from my SGH-I777 using xda premium
Coreym said:
Looks the same as the eBay ones. But you say it does fit? As in the entire rim of the phone is in the case without one side being favored?
Just curious because I love the mesh case but this one for the i9100 does not fit my phone (ATT version)
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
I don't understand how one mesh case can be a different size from another. I have the international version and it fits perfectly. It doesnt set in the case without a tiny bit of force, it snaps in and is a perfect fit.
Sent from my SAMSUNG-SGH-I777 using xda premium
roadrash7 said:
I don't understand how one mesh case can be a different size from another. I have the international version and it fits perfectly. It doesnt set in the case without a tiny bit of force, it snaps in and is a perfect fit.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I don't think they are differnet but the dimensions of the att version and the international version are slightly different. Also.. Im not the only one who is not seeing a perfect fit. Even the distributer that I bought it from confirmed it doesn't fit right.
Sent from my SGH-I777 using xda premium
Yes, entire rim fits in and stays in almost perfectly. It's made for the international version, so the fit isn't exactly perfect. For the price it will work until a perfect one comes out. I'm a perfectionist. Most people would probably think that this thing fits just just fine.
I haven't dropped it yet, though, so I don't know how well the case will stay on the when dropped. But it is a very good fit.
Coreym said:
Looks the same as the eBay ones. But you say it does fit? As in the entire rim of the phone is in the case without one side being favored?
Just curious because I love the mesh case but this one for the i9100 does not fit my phone (ATT version)
Click to expand...
Click to collapse
The two mesh cases that don't have a metal name plate on them are slightly different. Look under the speaker hole, and notice that one has mesh holes all the way across, and the other one doesn't. You want the one that doesn't have holes all the way across the bottom row of mesh holes below the speaker hole.
wified said:
Yes, entire rim fits in and stays in almost perfectly. It's made for the international version, so the fit isn't exactly perfect. For the price it will work until a perfect one comes out. I'm a perfectionist. Most people would probably think that this thing fits just just fine.
I haven't dropped it yet, though, so I don't know how well the case will stay on the when dropped. But it is a very good fit.
The two mesh cases that don't have a metal name plate on them are slightly different. Look under the speaker hole, and notice that one has mesh holes all the way across, and the other one doesn't. You want the one that doesn't have holes all the way across the bottom row of mesh holes below the speaker hole.
Click to expand...
Click to collapse
..right on, thanks for the replies!
Sent from my SGH-I777 using xda premium
wified said:
The two mesh cases that don't have a metal name plate on them are slightly different. Look under the speaker hole, and notice that one has mesh holes all the way across, and the other one doesn't. You want the one that doesn't have holes all the way across the bottom row of mesh holes below the speaker hole.
Click to expand...
Click to collapse
dude.. where do you get the "right" GS2 case with the "right" mesh holes??
because mine doesn't have the name plate, but has mesh holes all along the bottom and definitely does not fit correctly!!
Coreym said:
dude.. where do you get the "right" GS2 case with the "right" mesh holes??
because mine doesn't have the name plate, but has mesh holes all along the bottom and definitely does not fit correctly!!
Click to expand...
Click to collapse
See post #7 above, the last link. You bought the one that doesn't fit. The other one with no mesh holes across the bottom of the speaker hole does fit. Look carefully, and you'll see the difference. I just ordered another one off of ebay last night for $2.50.
wified said:
See post #7 above, the last link. You bought the one that doesn't fit. The other one with no mesh holes across the bottom of the speaker hole does fit. Look carefully, and you'll see the difference. I just ordered another one off of ebay last night for $2.50.
Click to expand...
Click to collapse
alrighty.. I seriously don't think there is another case out there this nice.. so, I'm gonna give this one a shot, despite it clearly saying it is compatible with the i9100, and not the i777 . But.. i have holes under my speaker button, so you might be on to something.. I'll order later today- and let you know when I get it.. thanks again.
ugh.. and they don't have it anymore
This is considered to be a row of holes below the speaker hole right. Cause this one fits perfectly.
Sent from my SAMSUNG-SGH-I777 using xda premium
Ah here it is
Sent from my SAMSUNG-SGH-I777 using xda premium
roadrash7 said:
Ah here it is
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I found one supposedly with no holes.. ordered. We'll see. Thanks!
Sent from my SGH-I777 using xda premium
Amazon now has mesh cases it says for the att model. Its a 2 piece but looks nice. Will be ordering one later today
http://www.amazon.com/gp/aw/d/B005Z48CH4/ref=aw_ls__1?coliid=I2B8SI36ZXUJEZ&colid=3V7XKBX2FRA6K
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Hi, I own a Skyrocket but my wife has a Galaxy Note. She was looking for a case that would protect the screen from being scratched in her purse and also something that would protect against bumps or falls.
At the store, we realized that there was not such a case, but we found that combining these two works pretty good.
So, I jut thought I would drop by and show you guys how the two fit/look.
Regards!
Links to products:
http://samsungfulfillment.com/index.php?route=product/product&path=26&product_id=52
http://samsungfulfillment.com/index.php?route=product/product&path=26&product_id=90
That's actually a good combo. My gf has that same speck case, but I protected her screen with the moshi protector.
Sent from my SAMSUNG-SGH-I717 using xda premium
mauix said:
Hi, I own a Skyrocket but my wife has a Galaxy Note. She was looking for a case that would protect the screen from being scratched in her purse and also something that would protect against bumps or falls.
At the store, we realized that there was not such a case, but we found that combining these two works pretty good.
So, I jut thought I would drop by and show you guys how the two fit/look.
Regards!
can you show a picture of what it looks like when you try to open the front. i would think that it cannot go back very far and stick out
Click to expand...
Click to collapse
Simply brilliant for someone who needs protection all around. I wouldnt be suprised if case makers made something similar in the future...if the demand is high.
-Once you go NOTE, you'd say 4 inches a Joke
can you show a picture of what it looks like when you try to open the front. i would think that it cannot go back very far and stick out
Click to expand...
Click to collapse
The way it is open in the third picture is the max it can be opened.
I love my candyshell! It just scratches way too easily,
http://www.amazon.com/KHOMO-Executi...5C/ref=sr_1_26?ie=UTF8&qid=1335852029&sr=8-26
There is a new case on amazon I havent seen before. It looks like a tough flip case for our Notes. Like a Otterbox meets folio cover. Anyways I got one and will demo it once it comes in.
Sent from my Transformer TF101 using Tapatalk
$70 plus shipping to protect my Note. Seems a bit steep. There are a lot of other, less expensive options out there. But thanks for sharing "your wifes Note".
hashbrown said:
http://www.amazon.com/KHOMO-Executi...5C/ref=sr_1_26?ie=UTF8&qid=1335852029&sr=8-26
There is a new case on amazon I havent seen before. It looks like a tough flip case for our Notes. Like a Otterbox meets folio cover. Anyways I got one and will demo it once it comes in.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
I'm looking forward to your review. Looks interesting.
For those who using flip case. Do you feel it so inconvenience???
Sent from my AT&T Galaxy Note™ - please forgive any typos
Alright, I've been searching for the past 30 minutes and can't seem to find a definitive answer, only questions like I have.
Is the Otterbox Defender case for the N700 compatible with the I717. I would assume it is but want to confirm before I order.
I'm looking at this one and I have the [email protected] I717 version. It's the cheapest I have found so far.
http://www.amazon.com/OtterBox-SAM2-N7000-20-E4OTR-Defender-Samsung-Note/dp/B007PYMG06/ref=sr_1_1?s=wireless&ie=UTF8&qid=1341861192&sr=1-1&keywords=otterbox+i717
Yes it is. Same part number for both models. You can check the N7000 forums for reassurance. The only thing on a 7000 is the home button. My 717 is in that very same Otterbox as I type.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Thank you very much!
Having never used an Otterbox, are they easy to take off and on? I wouldn't mind having one to protect it in certain situations, but for daily use I like to go naked.
Hockey37 said:
Having never used an Otterbox, are they easy to take off and on? I wouldn't mind having one to protect it in certain situations, but for daily use I like to go naked.
Click to expand...
Click to collapse
Yes. Peel off outer covering, release the 8 tabs holding the skeleton frame and voila! All done.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Yes, I have the Otterbox on my i717 now- exact fit. Buy it, it's the best protection yet.
sent from my spaceship somewhere over Area 51
Yes, that model fits our phone perfectly. Its easy to remove, takes no more than a minute.
poocano said:
Alright, I've been searching for the past 30 minutes and can't seem to find a definitive answer, only questions like I have.
Is the Otterbox Defender case for the N700 compatible with the I717. I would assume it is but want to confirm before I order.
I'm looking at this one and I have the [email protected] I717 version. It's the cheapest I have found so far.
http://www.amazon.com/OtterBox-SAM2-N7000-20-E4OTR-Defender-Samsung-Note/dp/B007PYMG06/ref=sr_1_1?s=wireless&ie=UTF8&qid=1341861192&sr=1-1&keywords=otterbox+i717
Click to expand...
Click to collapse
wouldnt fit well. n7000 has that huge home button in the middle. built in screen protector wont be compatible.
bought it from Amazon and it fits perfectly. I'm sure it voids the warranty but I removed that nasty plastic screen protector. Not sure how anyone could stand having that thing on! It's not perfectly clear and scratches easily. Other than that :good:
poocano said:
bought it from Amazon and it fits perfectly. I'm sure it voids the warranty but I removed that nasty plastic screen protector. Not sure how anyone could stand having that thing on! It's not perfectly clear and scratches easily. Other than that :good:
Click to expand...
Click to collapse
Now more than ever, if you've removed the built in screen protector, be on alert for a build up of crap in between the screen and case. Personally, as bad as it makes the screen look, I've left mine on. My last Note, of 3 total, got a scratch on the screen. So just in case.... Yes, these Otterboxes are quite the case!
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
has anyone else bought the TPU case at a verizon store
it fits really well.
didnt think id ever want it, but it feels nice, and was cheap only $20
andybones said:
has anyone else bought the TPU case at a verizon store
it fits really well.
didnt think id ever want it, but it feels nice, and was cheap only $20
Click to expand...
Click to collapse
my cheap case from amazon finally came yesterday, and im pretty happy with it
http://www.amazon.com/gp/product/B008CQW7QO/ref=oh_details_o00_s00_i00
5 bucks, shipped and it fits really well
unfortunately i was impatient waiting for it to get here yesterday, and spent $20 bucks on one of those awful silicone cases at a vzw 3rd party, since NO STORE IN MY AREA HAD ANYTHING ELSE!!!!
all 3 vzw corps, 2 3rd parties, bb, sams club, and pc richard had nothing left by monday/tuesday
apparently my main vzw corp had a ton of stuff last weekend, but according to them they "sold a lot of this phone on friday/saturday, and people bought up all the accessories", and the other close vzw corp only had red and pink tpu cases
supposedly bb was getting stuff early next week, but now im happy with the cheap amazon one
might get an otterbox when they show up, but only if adb during boot is fixed first (probably permissions issue) cuz otterbox doesnt equal easy batt pull
I bought it. I've always liked TPU cases, and this one is slim and fits well.
Sent from my ADR6410LVW using xda app-developers app
I purchased it as well. It's nice, but my only complaint is that unlike the TPU case for the OG DInc, the volume and power buttons aren't covered by the case. Other than that, it's great.
dbrits said:
I purchased it as well. It's nice, but my only complaint is that unlike the TPU case for the OG DInc, the volume and power buttons aren't covered by the case. Other than that, it's great.
Click to expand...
Click to collapse
I'm just the opposite. I prefer the cut out sections. I always cut those sections out on the old versions
i like the volume cut outs but the power is a pain but for me it isn't an issue, as I use wake on vol on every phone/ROM I use, and I also use a widget to put my phone to sleep, so unless I'm powering off the phone I don't touch the power button
I have the red one... It looks and feels great... And ordered 4 different color S style cases as well on amazon.. can't wait for those
Sent from my ADR6410LVW using Tapatalk 2
I'm still looking for a case becuase I don't see that many cases. Not that many major companies release cases for this phone I might wait for a while, and I might get diztronic one if I don't see any more.
My only complaint with the TPU is that the power button is very hard to push, but I use a widget to turn the screen off and the volume buttons to turn on, so it works for me personally.
TBH though, I only use the case when out n about drinking or something.
90% it's off
the feel of this phone stock is very nice.
no overheting that I've experiened with the Rezound.
also this is quite thin, compared to Rezound.
batt life is decent as well
my friend got a tpu case from Amazon and complained about the power button being difficult to press. I suggested using thin strips of tape on the inside of the case under the power button to reduce the gap between button and case. She did that and now the button works perfectly.
Sent from my Incredible 2 using Tapatalk 2
andybones said:
My only complaint with the TPU is that the power button is very hard to push, but I use a widget to turn the screen off and the volume buttons to turn on, so it works for me personally.
TBH though, I only use the case when out n about drinking or something.
90% it's off
the feel of this phone stock is very nice.
no overheting that I've experiened with the Rezound.
also this is quite thin, compared to Rezound.
batt life is decent as well
Click to expand...
Click to collapse
The Verizon TPU has the cut out for the power button... Very great quality rpu as well
Sent from my ADR6410LVW using Tapatalk 2
nitsuj17 said:
my cheap case from amazon finally came yesterday, and im pretty happy with it
http://www.amazon.com/gp/product/B008CQW7QO/ref=oh_details_o00_s00_i00
5 bucks, shipped and it fits really well
...snip...
im happy with the cheap amazon one
Click to expand...
Click to collapse
Based on your glowing review, I bought this cheap one, too. It just arrived today, and in the few hours its been on the phone, I like it much better than my original snap-together clear plastic case. Using the power button through the case is taking a little getting used to. I will likely try the wake on volume mod ...when we get root...
junkmail9 said:
Based on your glowing review, I bought this cheap one, too. It just arrived today, and in the few hours its been on the phone, I like it much better than my original snap-together clear plastic case. Using the power button through the case is taking a little getting used to. I will likely try the wake on volume mod ...when we get root...
Click to expand...
Click to collapse
right it's too bad i can't hook u up with wake on vol, i dont use power button every, vol button to turn on, and widget to turn off
the community s-off beta test phone *should* arrive today, if not should be tmw since it's usps.
then the work begins, and hopefully everyone has s-off screw htcdev unlock!
I ordered the "Diztronic Matte Back Translucent Black Flexible TPU Case for HTC Droid Incredible 4G LTE (Verizon) **For New 2012 4G LTE Model Only (ADR6410)** [Diztronic Retail Packaging]" case from Amazon and it fits very well! I previously had the black / clear S-type TPU case on my DINC 2 and it separated where the black and clear parts connect after a few months.
I also got the "GreatShield Ultra Anti-Glare (Matte) Clear Screen Protector Film for HTC DROID Incredible 4G LTE (3 Pack)". I'm addicted to the matte finish screen protectors. Not only do they eliminate the glare but it makes swiping so much easier (especially here in humid Florida).
Sent from my ADR6410LVW using xda app-developers app
sleepit said:
I ordered the "Diztronic Matte Back Translucent Black Flexible TPU Case for HTC Droid Incredible 4G LTE (Verizon) **For New 2012 4G LTE Model Only (ADR6410)** [Diztronic Retail Packaging]" case from Amazon and it fits very well! I previously had the black / clear S-type TPU case on my DINC 2 and it separated where the black and clear parts connect after a few months.
I also got the "GreatShield Ultra Anti-Glare (Matte) Clear Screen Protector Film for HTC DROID Incredible 4G LTE (3 Pack)". I'm addicted to the matte finish screen protectors. Not only do they eliminate the glare but it makes swiping so much easier (especially here in humid Florida).
Sent from my ADR6410LVW using xda app-developers app
Click to expand...
Click to collapse
How transparent/clear and fingerprint/smear resistant is the GreatShield Ultra Anti-Glare (Matte) Clear Screen Protector? I have a "crystal clear" screen protector It is nice and transparent, but it is horrible with fingerprints.
Regarding the TPU case I bought, my only complaint is that the front sides don't come up high enough to protect the glass when setting the phone face down on a table. Otherwise it's great.
Sent from my Kindle Fire using Xparent Blue Tapatalk 2
Ill post pics of the stock one I got from Veriozn, cna u guys pis t some shots as well/
junkmail9 said:
How transparent/clear and fingerprint/smear resistant is the GreatShield Ultra Anti-Glare (Matte) Clear Screen Protector? I have a "crystal clear" screen protector It is nice and transparent, but it is horrible with fingerprints.
Regarding the TPU case I bought, my only complaint is that the front sides don't come up high enough to protect the glass when setting the phone face down on a table. Otherwise it's great.
Sent from my Kindle Fire using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
That's a huge advantage of the matte protectors which I left out...no fingerprints! I hardly ever have to wipe the screen off unlike before with no or a clear protector on.
Sent from my ADR6410LVW using xda app-developers app
Case / Screen Protector Images
Here my phone with the following accessories -
http://www.amazon.com/gp/product/B00873YO22/ref=oh_details_o02_s00_i00
http://www.amazon.com/gp/product/B008927VE4/ref=oh_details_o02_s00_i02
The lip on the case definitely keeps the screen from touching the surface when laying it face-down.
sleepit said:
Here my phone with the following accessories -
http://www.amazon.com/gp/product/B00873YO22/ref=oh_details_o02_s00_i00
http://www.amazon.com/gp/product/B008927VE4/ref=oh_details_o02_s00_i02
The lip on the case definitely keeps the screen from touching the surface when laying it face-down.
Click to expand...
Click to collapse
Does that case add considerable bulk? That's the only thing that has kept me from ever casing a phone.
Sent from my HTC Incredible 4G
Pandalero said:
Does that case add considerable bulk? That's the only thing that has kept me from ever casing a phone.
Sent from my HTC Incredible 4G
Click to expand...
Click to collapse
No, the case is very slim...I'm still trying to get used to how narrow this phone is compared to the DINC 2. I have a nasty habit of dropping my phone so I can't live without a case.
Sent from my ADR6410LVW using xda app-developers app
Haven't seen any real world shots of this case on the internets so here you go
http://www.amazon.com/SUPCASE-Samsu...8&qid=1381442661&sr=1-24&keywords=note+3+case
[/URL[URL=http://s767.photobucket.com/user/mellofello808/media/DSC01331.jpg.html]
First impressions is that there was a lot of thought put into this case. It is well crafteed, and adds good protection. I love the semi transparent back. Not bad for $10, it will hold me over until I find a sview cover.
I have the solid black on the way. After midnight the price drops to 1.75 + ship on Amazon for the solid black case. Any appreciable lip designed into the case to protect the screen and the camera?
Yeah, I picked up two Black/Black ones for 1.77 each. Pretty solid case for the price. I've dropped it a couple of times from various heights and I've had no problems so far. I would definitely recommend this case.
Sent from my SM-N900T using XDA Premium 4 mobile app
The camera protection is actually the nicest touch. It is just slightly thicker then the camera, and the case has a nice reinforced band around the camera. The there are two small ridges that protrude out of the back that are good for grip and make sure nothing touches the camera.
I'm actually looking at lanyards which this case is compatible with. Nice to have for peace of mind. :good:
JawjaBill said:
I have the solid black on the way. After midnight the price drops to 1.75 + ship on Amazon for the solid black case. Any appreciable lip designed into the case to protect the screen and the camera?
Click to expand...
Click to collapse
I have a price watch on it and it only has happened once in the past week while I was sleeping. I missed it, but haven't gotten any more notifications after that.
I put up a review on the grey and clear supcase the other day and noticed the case does not have a cut out for the video microphone on the top of the phone next to the headphone jack.
The case looks great but how did you installed Lumia on your Note 3? Is your phone rooted? If not, what kind of app is that?
mainstang said:
I put up a review on the grey and clear supcase the other day and noticed the case does not have a cut out for the video microphone on the top of the phone next to the headphone jack.
Click to expand...
Click to collapse
I got the white one and I just noticed that too.
mellofello808 said:
Haven't seen any real world shots of this case on the internets so here you go
http://www.amazon.com/SUPCASE-Samsu...8&qid=1381442661&sr=1-24&keywords=note+3+case
[/URL[URL=http://s767.photobucket.com/user/mellofello808/media/DSC01331.jpg.html]
First impressions is that there was a lot of thought put into this case. It is well crafteed, and adds good protection. I love the semi transparent back. Not bad for $10, it will hold me over until I find a sview cover.
Click to expand...
Click to collapse
Dude! What rom are You Running that gives you the tiles? Slick!
Sent from my SM-N900T using xda app-developers app
Ceasare said:
Dude! What rom are You Running that gives you the tiles? Slick!
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
Launcher not ROM.
Sent from my SM-N900T using xda app-developers app