Hi. I'e a tablet xing ling (chinese) with Android 2.3.3 and resistive screen, and I need to calibrate tath screen on every reboot.
Where are the configuration files of "X" and "Y" to solve it?
I want to do a script to replace these values on every reboot.
If you have any other solution. please tell me how to fix it.
PS: I've tried to root this, to make factory recover and to use another programs to calibrate my screen and nothing works.
PS2: Sorry if this post are in incorrect area. My english is very poor.
Please. Help me!
Thanks.
Related
Hi,
i´m looking for an way to change the frist Bootscreen of my SGS-I9000. Not the bootanimation, this is already done^^
I mean the first screen appearing when turn on the phone. There is atm Samsung-Galaxy-S and on boddom "powerde by DarkCore & Darkys-Rom"
How to change this? I want to remove the "powerde by DarkCore & Darkys-Rom"-Tag and, if possible, replacing it with a custom one...
Hope someone can help me
Dear xda forums.
Unortunatedly, this is my first post and i will be asking for help rather than helping :/
So... my father came in a week ago with a chinese android phone that i cant tell what phone it is trying to replicate exactly.... thing is, no matter how much i look for this phone i cant find anything about it, i already searched a lot on how to fix this proble but to no avail...
I can give more details if you need them), but basically this is my problem:
I got a chinese phone that runs on 4.2.2, and after working a lot, i managed to install supersu via framaroot(superuser would not work properly).
Thing is, being the inpatient person i am, before backing up anything, or installing a recovery rom or any costum rom, i decided to check some apps that required root.
I downloaded the app anim mod *root* because i thought it was a good idea to change the animations of my phone
HERES THE PROBLEM i used this app and i could see how it was changing things in my system files, it then asked for a reboot, and now it wont get past the boot animation and it freeses right there, i can enter factory mode(which is in chinese and i did look up for a translation) and recovery mode:
In both modes i was able to reset the phone but the problem is still there, ive literally have been searching whole days now and i am quite frustrated.
My question: what should i do to fix this? i have root but no recovery rom , so is there a way i can install a costunm rom just to try?
If the case is that i changed a system file (animations) how can i change them through my pc? does a reset from the stock recovery reset the system files aswell?
I am new to this, but i am willing to learn and try everything that could fix this.
If anyone wants to help, you can ask me whatever you want, i can upload pictures if you want to help me identify it or the specs i managed to get from factory mode.
the phone says it is an alps model a76, but thi phone is nowhere to be found help me please
Hi guys!
I have big problem with my HTC..
I have rooted it and then deleted orginal Lock Screen..
All goes whell till i do the factory reset..
And now after turning on it stops before Custimizing setup and cannt turn on..
Can see only Wallpaper..
Anyone can help?
Incorrect forum
Elgars said:
Hi guys!
I have big problem with my HTC..
I have rooted it and then deleted orginal Lock Screen..
All goes whell till i do the factory reset..
And now after turning on it stops before Custimizing setup and cannt turn on..
Can see only Wallpaper..
Anyone can help?
Click to expand...
Click to collapse
This is not the place to post this Elgars, as this is not relevant to Android Wear.
Please post in the relevant forum so that other members who are looking for the same thing so that they may benefit.
This forum will best serve you for this >>> http://forum.xda-developers.com/android/help <<<
Re-brush system
So easy,Re-brush system!
Dear All,
I hope someone can help me get out of the situation.
I am using this FEITENG HTM H9001 6 Inches China Phone.
It came rooted by the vendor.
It is a good and nice phone. And I like it alot.
After I install a "font changing" apps,
The phone auto shut off and restart and it stuck at the HTM logo.
So sad Sad.
I know I need to reflash the firmware.
So I did some search on line...............
After finally managed to install the USB's driver which I was not able for quite long....
I follow the instruction on youtube from this site.
Down loaded the flast tool - SP Flash Tool v3.1332.0.sn187
Go to needrom to get a HTM H9001 firmware.
It should be there "right firmware". Someone there on the page where i got the firmware for H9001 said that its stable after he flash it. So proceeded to download it. Safely assume its the correct rom.
Using the flashtool, I followed the flashing steps exactly untill the green sign appeared. I was looking forward to see it start again after the problem mentioned above...........
After pulling out the cables from my PC, I press the power/start button of the phone to check if its ok....BUT It did started but it only shows "whitish color screen"
I can't even see the usual green colour HTM logo when the phone was switched on but I can hear sound of the phone starting... it stays at the whitish screen. And when I touch certain part of the screen the phone seem to response...just that I cannot view the desktop and the icon.. perhaps the video driver was corrupted in some way...or could it be the wrong rom
I proceeded re-flash it again........
same result - white screen.... phone still response to " power switch when press the LCD goes off. and some responsive sounds when the blank screen is touhed...
I am here in hope for some luck in finding ways to recover my phone back to normal...
It all started from installing a font changing apps that corrupted the firmware...than perhaps my action may have complicate the situation further....
Please. Any help would be great.
Thanks so much in advance.
How can I make good back my Feiteng HTM H9001
Or did I got the wrong ROM ?
It did not stae Feiteng just H9001 .
The rom I downloaded for my phone is here for my Feitend HTM H9001.
Is this the correct rom for my phone ?
Appreciate , really needs help to get out from this problem.
I love this phone. I want to make it good again Smile
I will try to upload some image to show its current stae.
many Thanks in advance.
Desmond
So desperate..I uses this MTK Droid tools.
I turn the phone on and it detected the details on my phone.....
Is there any way to use other tools to get my phone back to working like before the "font changing apps" time .... it was working great just before with no problem at all.............
MTK droid can detec the details of my phone...........
BUT i am lost - any way to use Droid tools to save the situation ?
I attached some picture to share what I meant...
Hope some nice great guys can shed some lights so i can try to move ahead..currently really lost... newbies to android phone....
Many Thanks
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Repair HTM H9001
moneycow said:
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Click to expand...
Click to collapse
Hello friend,
if you want to recover your H9001 look this link:
movilesdualsim com htm6582
on the site will explain the steps to solve your problem.
To me it happened to me same thing that has happened to you.
And now I enjoy my H9001 more than ever.
regards
Hi guys.
I'm new, and im today reg on this forum for help and to solve the problem.
I have mobile: phone pad g530 (mediacom)
And i turn on device, image on startup freeze....
Okey, i go to options press down volume gumb and shutdown gumb for boot, and select factory reset.
Restart phone and my device freeze on startup -.-
Again, the same does not help me factory reset
(My english is bad sorry) xd Im from bosnian hah.
Please help me guys ?
I have question ?
How to fix this ? Download and install new android ?
Does my cell phone supports Android 4.4.4 ?
If supported, what i need to take off to install it successfully on 4.4.4 version on my device and correct this errors.
Please help me and thanks.,