[Q] DroidX stuck in Boot Loop after Liberty Flashing - Android Q&A, Help & Troubleshooting

I was flashing Liberty Gingerbread to my Droid X with ClockWorkMod Recovery, I Wipe data/Factory Reset and Wipe Cache, but, when it rebooted, it get stuck in the Yellow Hand Boot Logo.
I don't know what to do, I've tried everything, pulling off the battery, Stock Recovery Factory Reset and volume down button and power button, so if you can help me will be great.

Have u tried reflashing the rom. It happens to me sometimes so i just reflash the rom and it starts to work.

vipaman said:
Have u tried reflashing the rom. It happens to me sometimes so i just reflash the rom and it starts to work.
Click to expand...
Click to collapse
About the thing of reflashing, how do you do it? and how i do it if i cannot enter to any kind of recovery exept the stock recovey which haves only four options:
-Reboot Phone (It reboots but gets into de Boot Loop again)
-Install: update.zip (I've tried it with the same rom and others and nothing)
-Wipe data/factory reset (does not work)
-Clear cache (does not work)
What i mean is that i cannot enter to ClockWorkMod Recovery so i cannot install a new rom.
I've heard about the Bootloader and SBF's or something like that but i don't know if it is safe or if it could work

Related

[Q] Endless boot cycle after flashing Litening Rom

Ok so my Galaxy S2 i9100 arrived today!
I began by flashing VillainRom 1.1 and then decided to give Litening Rom a try, fired up odin, selected the rom and hit start. It completed but instead of rebooting the phone has gone into an endless reboot cycle, just showing the boot screen over and over.
I pulled the battery and am reflashing now, it that doesn't work where do I go from here?
Cheers
Edit: Nope, still not booting up properly
You go to the OP of the VillainROM thread and read the words in big red letters.
nobnut said:
You go to the OP of the VillainROM thread and read the words in big red letters.
Click to expand...
Click to collapse
So if I reflash VillainRom then enter recovery, wipe user data and THEN install Litening Rom it should work?
Or have I permanantly screwed my phone?
Edit: So I reflashed Villain and it booted up fine, I went into recovery as suggested and selected wipe user data. After that finished I held the power button down until the phone turned off, then booted into downlaod mode and flashed litening. Same problem occurred, I tried this two more times but both to no avail.
What am I doing wrong?
Cheers
flash to stock KE7, then boot into recovery, select wipe data/factory reset and wipe cache, boot into download mode, flash lite'ning rom, then then it should work 100%.
oh and btw, as long as you can boot into recovery/download mode, your device isn't bricked.
kaukassus said:
flash to stock KE7, then boot into recovery, select wipe data/factory reset and wipe cache, boot into download mode, flash lite'ning rom, then then it should work 100%.
oh and btw, as long as you can boot into recovery/download mode, your device isn't bricked.
Click to expand...
Click to collapse
Sorry to seem like a noob here... but a few quick questions, What does KE stand for exactly and where can I downlaod a stock version from? Cheers
KE means after KD but before KJ ,just as A is before C .
Stock roms dev page .
jje
kaukassus said:
flash to stock KE7, then boot into recovery, select wipe data/factory reset and wipe cache, boot into download mode, flash lite'ning rom, then then it should work 100%.
oh and btw, as long as you can boot into recovery/download mode, your device isn't bricked.
Click to expand...
Click to collapse
Worked brilliant, thanks
I had a similar problem, but I solved it by just booting into recovery mode, wiping data(/factory reset) and dalvik cache and then just flashing then ROM through "download" mode.
I did not have to flash any stock ROM prior to that. Just these two simple steps!

[Q] CM7 Boot loop?

So I installed CM7 Beta and now I'm stuck in the splash screen.
So the CM7 screen keeps repeating itself.
Can someone help me get out of this?
do a bettery pull. wipe cache wipe dalvik and factory reset, if that doesnt work re install,
marko! said:
do a bettery pull. wipe cache wipe dalvik and factory reset, if that doesnt work re install,
Click to expand...
Click to collapse
How do i do that. I havent been using my phone in a while
also make sure you're using either the most up to date CWM from Rom Manager or the most up to date version of Romracer's recovery
most ppl who run into the bootloop problem with cm7 install forget to wipe data/factory reset...make sure u boot into recovery and do that.. on the latest CWM it's the 3rd option down
PEOPLE:
How do I get to the place where I can wipe the memory or clear cache? Is it Power+Vol Down?
yeah it power then hold volume down untll you see fastboot. then hit volume down untill you see android recovery, then hit volume up
YES! Got it working.
Thanks for all of those who helped!
Im glad it was that easy

Stuck on unlock screen

Hi guys I received a Refurbed phone today and unlocked my phone. I have tried both Tenfars and the RomManager version of recovery on my phone. When I boot up my phone says Unlocked and if I choose to I can enter fastboot or recovery without issue. The problem comes when I try to flash a rom.
After doing the standard Factory reset, wipe cache wipe dalvik, I reboot and then get stuck on the Dual core screen. I have waited more than five minutes on this screen with no luck. Any suggestions?
I have tried both Aura and Darkside in the same manner as described above.
Thanks much!
You may NOT wipe Factory Reset after flashing a rom... maybe its that the problem...
1.- Wipe Data/Factory
2.- Wipe Cache
3.- Flash your desired ROM
4.- Reboot
Try it in that order...
nineismine said:
Hi guys I received a Refurbed phone today and unlocked my phone. I have tried both Tenfars and the RomManager version of recovery on my phone. When I boot up my phone says Unlocked and if I choose to I can enter fastboot or recovery without issue. The problem comes when I try to flash a rom.
After doing the standard Factory reset, wipe cache wipe dalvik, I reboot and then get stuck on the Dual core screen. I have waited more than five minutes on this screen with no luck. Any suggestions?
I have tried both Aura and Darkside in the same manner as described above.
Thanks much!
Click to expand...
Click to collapse
Yeah I always do all of the wipes before the rom... It ended up being fixed by reflashing RomRacers recovery. Thanks

[Q] Rogers xt910 bricked??

Hello All,
I've searched around and wasn't able to find anything that helped. I had the leaked ics rom on the phone (with no root and stock recovery) which worked fine for several months, then the other day the phone crashed and now it only boots to the white Rogers screen. I've tried a physical battery pull and still nothing. I've also tried flashing a stock rogers flashboot and it does succeed but still doesn't make it past the white Rogers screen. I can still get to stock recovery and Flashboot mode but i can't seem to get it working.
I appreciate any advice to help me out. Thanks.
after you flash a stock with rsd enter in stock recovery and delete cache (and dalvik?), then reboot
heblu said:
after you flash a stock with rsd enter in stock recovery and delete cache (and dalvik?), then reboot
Click to expand...
Click to collapse
Wait until battery 0% then boot up with Volume Down+ Volume Up, select AF Boot. Use RSD lite.
heblu said:
after you flash a stock with rsd enter in stock recovery and delete cache (and dalvik?), then reboot
Click to expand...
Click to collapse
Only option I have is "wipe cache partition" and "wipe data/factory reset".
I've flashed stock and then wiped cache partition but I still can't boot past the white Rogers screen.
zephyr9901 said:
Only option I have is "wipe cache partition" and "wipe data/factory reset".
I've flashed stock and then wiped cache partition but I still can't boot past the white Rogers screen.
Click to expand...
Click to collapse
wipe data and cache and retry flashing. maybe another firmware
if still bootloop, wipe cache/data again and reboot
I had the same problem once when I've flashed a stock rom, but after the wipes, it worked

Can only boot into recovery TWRP [Half Loop]

I was running cm12.1_janice-130915 on my Samsung Galaxy S Advance I9070 for a couple of days, than I got a bug which could perhaps be fixed by wiping the dalvik chache and another chache, so I long-clicked the power button, opened the reboot menu and chose 'Reboot into Recovery' after which it rebooted into recovery. However when I tell it from the recovery to reboot to system, it won't, it will reboot to recovery again.
So I started of by wiping partitions and chaches in the hope that the setting would be 'undone' in the end I did a factory reset and put the rom on my phone again, though it's still booting into recovery modus.
I don't know what I could do anymore. ADB-sideload won't run (if that would be any help). Is my phone a brick now or is there hope?
Sounds like you will need to restore the stock firmware / OS with Odin.

Categories

Resources