Related
I just thought I may as well post a little review on this case. I bought this case at the same AT&T Corp store that I bought my SGS II on Sunday.
This case has a very high quality feel to it. The fitment was incredibly tight though. This is likely because it is designed to fit both the international and AT&T SGS II devices. This should be obvious if you look at the fourth pic. It clearly shows openings for both the international and AT&T NC mic positions.
I have to be honest, I only chose this case because the Case-Mate and Ballistic options were far too bulky for my taste. This case provides enough protection, for me anyway, without adding too much bulk. I really wasn't too keen on the leather insert at first either.
In the last few days of use, I have come to really like this case. I even appreciate the leather insert. It provides a high-end feel to the case and provides for outstanding grip. The front lip barely covers the chrome bezel. I actually had to work the case to get it to completely wrap around the front of the device. The end result is a case that looks and feels like part of the phone.
At this point, I can say I highly recommend this case for anyone who doesn't need a bulky case (although they provide more protection), and who also wants something more than just a gel cover.
naplesbill said:
I just thought I may as well post a little review on this case. I bought this case at the same AT&T Corp store that I bought my SGS II on Sunday.
This case has a very high quality feel to it. The fitment was incredibly tight though. This is likely because it is designed to fit both the international and AT&T SGS II devices. This should be obvious if you look at the fourth pic. It clearly shows openings for both the international and AT&T NC mic positions.
I have to be honest, I only chose this case because the Case-Mate and Ballistic options were far too bulky for my taste. This case provides enough protection, for me anyway, without adding too much bulk. I really wasn't too keen on the leather insert at first either.
In the last few days of use, I have come to really like this case. I even appreciate the leather insert. It provides a high-end feel to the case and provides for outstanding grip. The front lip barely covers the chrome bezel. I actually had to work the case to get it to completely wrap around the front of the device. The end result is a case that looks and feels like part of the phone.
At this point, I can say I highly recommend this case for anyone who doesn't need a bulky case (although they provide more protection), and who also wants something more than just a gel cover.
Click to expand...
Click to collapse
Thanks for this review! I am looking for something less bulky than the case-mate. I'll have to check this out when I stop in my local ATT store. How much they selling them for?
I believe it was the usual rip-off price of $35. However, they give me 20% off on accessories at this store (frequent shopper there LOL). I am sure there are better deals, but I did not want to take a chance of messing up my phone before finding a case elsewhere. I paid full retail price so a few extra bones wasn't that big of a deal.
I was planning to return it, but I can't find anything similar online. If I find it online cheaper, I will buy it and return this one for sure. Either way, I am happy enough as it is.
I just bought this case today. I love it! Its like a mix between a hard case and tpu. If you had the bodyglove case on your captivate, you'll love this case. I like the look of the leather back, as I think it adds some class. This case doesn't add that much bulk either.
That was my first choice but the store rep couldn't get it to fit properly so I went with the ballistic even In this case the phone feels tiny in my Herman Munster hands after the infuse in a ballistic case I love this phone just gotta adjust to it
Sent from my SAMSUNG-SGH-I777 using xda premium
I also got this case. I like it a lot, it keeps the same of the phone without adding much bulk at all!
I got this case for my AT&T Galaxy S2 on launch day and I LOVE it. The Ballistics were just ridiculous. As far as getting the case on goes, I couldn't get it to fit at first but if you put it in bottom only, completely lip it; then top, completely lip it; then work the sides, it will always fit perfectly. Sometimes I feel like Gollum caressing my precious Ring with this baby.
Picked up this case today and absolutely love it. It doesn't add much weight to the phone and i feel it still keeps it slimness. As far as fitment goes. It does fit damn tight. I put it on the best I could at the store. I squeezed the sides to get the lip to go over but never could get the bottom corners to cover properly. Once I got home, I took it back out, then put it back on in reverse. This did the trick and it went on a lot easier.
I'm probably going to end up buying this case ASAP... I was interested in it for a while, but was afraid that it may have been too bulky.
Thanks for the feedback guys!
Sent from my SAMSUNG-SGH-I777 using xda premium
I just picked this case up from the AT&T store today. I have to say, it isn't a bad case but it adds a little bulk to the phone. I have another case coming in from Amazon tomorrow so we will see which one is better. I am not really a fan of the buttons being covered though since it makes it a little harder to press. I can already tell that this case will offer a lot of protection to any standard drop.
This is a great case!! been having it since Monday.
One thing to note is that if you are getting a discount on your cell phone plan you should also get that same discount on any accessories that you buy from AT&T.
I too chose this case with my purchase. it was the best of the lot,but I cannot keep this case. it just does not fit. I get 50% accessories on my plan. I went back to a store (not the one I got it from) thinking that they might have others. When I told the rep about the fit she said they are having returns for the same reasons. Found one that seem better on ebay waiting for it to come in. In the mean time I will kee this case to protect my baby, but will return within 30 days.
On another note anyone got the ivisor AG screen protector? not sure i am liking it. It seem to make my screen dim because of the non-glare, cant seem to find any good one on the net, they all seem to be for the international version. things are new so I will wait a bit.
Coldheat1906 said:
This is a great case!! been having it since Monday.
One thing to note is that if you are getting a discount on your cell phone plan you should also get that same discount on any accessories that you buy from AT&T.
Click to expand...
Click to collapse
I am on a corporate account through my employer and get 15% off. I asked them about that discount on accessories and they said that it only applies to service plans. I guess I will be returning the case today after work...
jiannichan said:
I just picked this case up from the AT&T store today. I have to say, it isn't a bad case but it adds a little bulk to the phone. I have another case coming in from Amazon tomorrow so we will see which one is better. I am not really a fan of the buttons being covered though since it makes it a little harder to press. I can already tell that this case will offer a lot of protection to any standard drop.
Click to expand...
Click to collapse
What soft cases don't cover the buttons? If they didn't cover them, you wouldn't be able to reach them.
Bigdog1 said:
I too chose this case with my purchase. it was the best of the lot,but I cannot keep this case. it just does not fit. I get 50% accessories on my plan. I went back to a store (not the one I got it from) thinking that they might have others. When I told the rep about the fit she said they are having returns for the same reasons. Found one that seem better on ebay waiting for it to come in. In the mean time I will kee this case to protect my baby, but will return within 30 days.
Click to expand...
Click to collapse
What problems are you having with fitment? While it does take a little bit to get it on right, it should still fit. I had problems with the bottom corners until I took it out then put in back on, starting on the opposite end.
axis01 said:
What soft cases don't cover the buttons? If they didn't cover them, you wouldn't be able to reach them.
Click to expand...
Click to collapse
The one I ordered and received from Amazon covers only the volume u/d buttons and has a cutout for the sleep/power button. I can press the power button just fine. I like this case better than the AGF from AT&T. It doesn't add a lot of bulk to the phone and was almost 1/3 the price so I will return it after work.
http://www.amazon.com/gp/product/B005P13O8E
I would love a case like this but the wife has the same phone as me. Does anyone know if it comes i white? Or am able to order a different color online?
Sent from my SAMSUNG-SGH-I777 using Tapatalk
jiannichan said:
The one I ordered and received from Amazon covers only the volume u/d buttons and has a cutout for the sleep/power button. I can press the power button just fine. I like this case better than the AGF from AT&T. It doesn't add a lot of bulk to the phone and was almost 1/3 the price so I will return it after work.
http://www.amazon.com/gp/product/B005P13O8E
Click to expand...
Click to collapse
That one doesn't look bad. I see they made a large cut out where the power button goes. Don't really care for that big cutout but to each his own. Mine has actually become a lot easier over the last day or so. I guess the compound loosens up over time.
Just got my GS2 today and bought this case at the same time. I wanted something sleek after a Ballistic case on my Infuse and this seemed perfect.
As others have stated it's a tight fit. The sales rep couldn't get it on completely so I had to play with it myself. Another post stated putting bottom and top on first. I had better luck with the sides first. Maybe it is just loosening up after trying 2-3 times to get it on.
The volume and power buttons being covered are going to take getting used to as it takes a good press to work them.
To sum up, love the case so far. Seems to be good quality and good protection.
I tried this case on yesterday and did not like the fit. The ATT store only had one so I am going to try a few more to see if they fit better. It was tight and I couldn't keep the lip over the edges all the way around no matter how hard I tried.
awtryau89 said:
I tried this case on yesterday and did not like the fit. The ATT store only had one so I am going to try a few more to see if they fit better. It was tight and I couldn't keep the lip over the edges all the way around no matter how hard I tried.
Click to expand...
Click to collapse
I had to keep pressing in around the sides to get it to fit perfectly. It took an hour or so to settle in.
Sent from my SAMSUNG-SGH-I777 using xda premium
When I bought my HTC Advantage 4 1/2 years ago there was no decent case for it anywhere - like the Note it has a large screen (5") and unlike the Note a very large body. I found Nutshell (a.k.a. Tough-as-Nuts) and their line of cases - built like tanks, literally with gun holster components including heavy leather and heavy-duty belt clips. We had a long discussion about it here, including pics http://forum.xda-developers.com/showthread.php?t=344605 . It ended up being the only case most XDA members bought.
Fast forward to today, now that I have my Note on pre-order my first stop was to check out the Nutshell offering for the Note. This is the one I found:
http://tuff-as-nuts.com/Samsung-Galaxy-Note-belt-case.aspx
I also happened to find an old post offering a discount, which I didn't know about when I ordered my other case. This offer may not even be valid:
http://forum.xda-developers.com/showthread.php?t=259275
I haven't ordered the case yet, I want to see how well the Note fits into my Advantage case first - it will fit the height and width but the Advantage case may be too roomy for the thickness since it is twice as thick as the Note. If I do order one I'll report back here with pics and a fresh review.
Edited 4/12. Case arrived today, ordered on March 26th (I used the "tuff02" 10% discount code mentioned below). Just as well-built as my old case, even stronger because they now build in something flat and hard into the back wall. By putting the phone into the case with the screen facing inward the screen will be fully protected. I ordered the pen loop option this time. I always carried one inside my last case but that phone was so thick there was room next to it. As I figured, there isn't enough room for a pen next to the Note - too thin. I'm not complaining.
In the last picture you can see a bump under the leather below the metal clip. That, along with the lower lip of the clip, keeps it on your belt no matter what you do.
I'm still looking for a case for mine and came across your post; thank you for sharing. I'm still gonna do some more looking, but this one is now on my list as a possibility (that is if they take them off hold and actually start making them).
FYI...
I tried the coupon code "tuff01" in the thread you linked to and it showed up 5% savings. For the heck of it I tried punching in "tuff02" and it shows 10% savings.
techntrek said:
I also happened to find an old post offering a discount, which I didn't know about when I ordered my other case. This offer may not even be valid:
http://forum.xda-developers.com/showthread.php?t=259275
Click to expand...
Click to collapse
Sweet! I'll be sure to use that.
This case is awesome. I also got one for my MDA, still looks like new.
Quick update, I noticed they removed their placeholder page for the Note case (the 2nd link in my 1st post above). I've emailed them to find out which of their cases would be best. I looked at this chart to match up to the Note's specs (146.85 x 82.95 x 9.65mm):
http://tuff-as-nuts.com/beltcasessizetable.aspx
At first glance their case #215 would work - it appears to be the right length and width, but it has twice the depth as it should for the Note so it would flop around. Then I noticed case 270 right above it is the very one I already have for my Advantage and I already know that case is the right height, but too wide and again way too much depth. So that would mean 215 would be too long! I'm not spending $60 and waiting 2 weeks to find out it won't hold the phone securely. If I hear back from them I'll report back.
I am currently using a NutShell case I got as a freebee back at one of the PPC expos it is a very good fit (I do have the Samsung flip cover on it). The design is their basic case with the notched corners and no clip (leather slip panel the belt goes thru)
Cheers
BR
I received a reply from the company:
Almost there
Still awaiting final asset approval.
http://tuff-as-nuts.com/Samsung-Galaxy-Note-belt-case.aspx
So the placeholder page is back, and it says they are taking preorders if you are interested. I may make an order today.
Thanks for the info, techntrek. Please post if you hear anything. I'm a former (heck I still have it) Advantage owner looking into the note now, and one of the first things I'm looking at is a belt case like I used to love back then!
- I also sent you a pm. Interested in comparisons for former Advantage users to compare against the Note.
I had an Advantage. What questions do you have?
Sent from my SAMSUNG-SGH-I717 using xda premium
Thanks for the reply, but too late - I bought the Note a week ago. Loving it except for battery life problems (which I'm researching again now!)
Yup, we had a nice conversation comparing the Advantage to the Note.
Glad to hear you got one.
BTW it looks like this case is now available. Getting ready to order, using the "tuff02" discount code.
Just ordered, may take up to 2 weeks for delivery.
I've been wearing my phone on my belt for more years then I can remember - but since I had nothing for the Note up front, I've been carrying it loose in my pocket (with screen protector & ultra-slim bumper case) for a week.
..and I might stay this way for a while. I was always catching my case on things before. I was also hoping the vibration would be easy to feel in the pocket, but this past weekend proved the vibration isn't strong enough.
Might switch back to a belt pouch later, but going to stick with this way for a while & see. Be sure to post reviews of the Tuff case when you get it!
Ditto, I've been trying it in the pocket for the last 5 1/2 weeks, also hoping I could get away from the pouch. But it was always hard getting it out, so I'm back to a pouch. I agree it is surprisingly hard to feel the thing vibrate even when its sitting right on your leg.
Updated post #2 with a full review, including pictures.
Two things I would change so far. I never used the D-ring on my old case, and never will on this one. I should have asked them to leave it off. Looks like it will be easy to remove with a razor blade.
I'm glad I got the pen holder/loop, but I should have asked them to put it on the BACK edge, and since I always wear it on my right hip, to put it on the side that faces rear (the right side as you face the back).
Some things for you to consider if you order one.
Nut case for Galaxy Note
This is my 2nd tuff-as-nuts case. My first outlived all of my 3 iPhones. It is still in almost new condition in my drawer. This is the nicest hip holster I have found. I have tried several. The clip will never break. The fit is very snug for the first week or so and then it loosens up. I am very happy with this case ever though it is expensive. I got chocolate leather with belt clip and full magnetic flap.
~ Atticus
fit with speck candyshell??
techntrek said:
Edited 4/12. Case arrived today, ordered on March 26th (I used the "tuff02" 10% discount code mentioned below). Just as well-built as my old case, even stronger because they now build in something flat and hard into the back wall. By putting the phone into the case with the screen facing inward the screen will be fully protected. I ordered the pen loop option this time. I always carried one inside my last case but that phone was so thick there was room next to it. As I figured, there isn't enough room for a pen next to the Note - too thin. I'm not complaining.
In the last picture you can see a bump under the leather below the metal clip. That, along with the lower lip of the clip, keeps it on your belt no matter what you do.
Click to expand...
Click to collapse
Thanks for valuable info re: cases w/beltclips - will the phone fit with the candy shell over it??
The fit is VERY tight with no cover. They design to the factory specs and go slightly smaller, counting on the leather to stretch a little.
They will make custom versions for a small extra charge, or you could compare all of their models by size (look for the link on the left side of their home page) and pick one that is slightly larger. The one they originally made for the Advantage is probably the one you'll need. If there is any wild chance you live in central MD you could try my old case and buy it from me if it works.
Hey everyone,
I recently swapped my rezound with the third cracked screen for a razr maxx.
Work is brutal to my phone and its seems that at any time it could be crushed by stretcher dropped on pavement left in a wrecked car etc etc.
I am only looking for one full time case and am torn between these trident cases
http://www.tridentcase.com/case/motorola/motorola-droid-razr.html
and the otter box
Has anyone used both?
Any input is welcome including other recommendations
Thank you
I have the Razr OG. I never looked at any other cases besides the Invincible shield but that is not a case but a military grade plastic that covers the whole phone. I am using the Outer Box Commander. That is a great case. It has a hard plastic cover with a screen protector in it and then rubber around the plastic. It makes the phone thick but it is protected. The belt click is great and stays on your belt. If you do not have it on your belt, it will fall off. I have had my phone in the clip on my belt and ran with it. It did not fall off or move. I also rode with it on my crotch rocket and it was fine too. It is $50 I think but well worth it. If you use the phone a lot, it does get warmer and faster. A lot of layers on the phone. That case would be the best for your job. I am going to school to me a diesel mechanic and I have had zero problems with it. I do take the phone out of the case and clean it. Remember, the more you take it out of the click, it will wear out. I have had the case since February.
Thank you.
Set2det617 said:
Hey everyone,
I recently swapped my rezound with the third cracked screen for a razr maxx.
Work is brutal to my phone and its seems that at any time it could be crushed by stretcher dropped on pavement left in a wrecked car etc etc.
I am only looking for one full time case and am torn between these trident cases
http://www.tridentcase.com/case/motorola/motorola-droid-razr.html
and the otter box
Has anyone used both?
Any input is welcome including other recommendations
Thank you
Click to expand...
Click to collapse
Basic diference between these cases are the sdcard/micro sim access, wich is not present in otter cases for razr. At least not in the comutter case.
Both are very similar in build material and specs. So..
Cheers
I work 911 law enforcement, and just recently got a razr maxx after leaving my iphone 4.
For my iphone I had the otterbox defender case. That phone took a beating getting dropped, and slammed to the ground. Never cracked the phone or really put any scratches on it.
So if otterbox has a defender line for the razr, I would go with that.
Sent from my DROID RAZR using Tapatalk 2
I personally own the trident case "kracken" the advantage the otter has over this one is the quality of the belt clip with it, otherwise I feel trident case beats it in every other department.
Sent from my DROIDRAZR using xda premium
I'm.stuck on which one i want. Like color choices on trident and the quality looks good besides the corners on trident not really protected that where phone mainly shatter if hit on corner and the belt clip looks bad on trident. I like fact that the SD card is accessible but how often do you change it. So my choice I think will be otterbox defender.
Sent from my XT910 using XDA
Buy the Trident and if you don't like it swap me for the Otterbox lol, I have a Otterbox Defender for my Maxx and it's just sitting around right now. I like it but don't need the bulk so it's just a added accessory
**Although it does look like those are Regular Razr cases and doesn't mention the Maxx, it is a little thicker so I'm not sure if the regular Razr cases would fit a Maxx right**
just bought the trident kraken its an excellent case doesnt feel cheap protects the screen also. i recommend it. i also like the fact the it has a metal replaceable kickstand and the many attachments that you can use with it like a tripod stand and the bicycle mount for the handle bar. All connectors are protected but accessible including the sd card and sim. Also,it looks bad ass with the carbon fiber finish on the back of the case.
collins521 said:
Buy the Trident and if you don't like it swap me for the Otterbox lol, I have a Otterbox Defender for my Maxx and it's just sitting around right now. I like it but don't need the bulk so it's just a added accessory
**Although it does look like those are Regular Razr cases and doesn't mention the Maxx, it is a little thicker so I'm not sure if the regular Razr cases would fit a Maxx right**
Click to expand...
Click to collapse
They don't, the chick at the verizon store didn't realize she grabbed the standard razr commuter case and couldn't understand why the fit wasn't right, ended up having to get it off amazon as they didn't have any for the maxx so the defender series having the plastic on the inside definitely wouldn't work.
I've always used Otterbox and also work at a store that sells both. More people come back because their Trident case was either too bulky or broke.
Otterbox is a better choice imo
*edit*
I have a Commuter and Defender case for my RAZR and I mostly use the Defender because I display it at work by throwing it or something.
I too work in EMS as a paramedic. Not sure of the equivalency in the states? I have been at it for over teen years and I've not broken a phone yet. Definitely haven't left one in a car wreck. I'm getting my RAZR today (hopefully) and I have the ultra case by sgp. It only adds 2mm to the the phone and has complete coverage up to the screen. I haven't tested yet obviously, but just from holding and inspecting it I would say it's great quality.
http://www.spigen.com/sgp-motorola-droid-razr-case-ultra-capsule-series.html
Sent from my Nexus S using xda premium
Here's my EMS story, enjoy fellas.
Even EMT's have emergencies...
I still can't believe this happened so I thought I'd share my tale of woe with you guys. First off I just bought this phone and its the best Android phone I've had to date, its simply awesome! So here goes,I am an emergency medical technician an was on shift last night when it happened. Last night I was responding to an emergency at a stadium during a track meet,as we got closer I began to hear murmurs from the nearby crowd that it looks to be a cardiac related incident. So I don't normally recommend this but in this case the shortest distance between us and our patient was a small 5 foot high chain link fence. I decided it would be prudent to reach our apparently collapsed patient as soon as possible. So over I went,but during my steady yet determined climb over the fence to get to my patient something went bad. I heard as scary yet recognizable sound behind me. It was the all to familiar sound of something smacking the surface of the concrete. Something in me knew instantly what it was. As fear and hesitancy welled up inside of me,I turned my gaze if only to look for just a brief moment. It was then that my eyes fell upon my brand new,not 20 hours old razr maxxface first on the unforgiving pavement. It had apparently taken a dive at the apexof my climb. I quickly retrieved it, stuffed it into my pocket and went on with my business. It was only till after the emergency transpired that I removed it from my pocket to find that the screen was completely shattered! Something inside of me screamed and writhed in anguish,as the proverbial wave of disappointment settled over me.
So here I sit this morning preparing to fill out the claim affidavit to asurion. When all I keep thinking about is now i'm going to get stuck with a used phone in return,to bide me through the next 2 years of my recently renewed contact with Verizon.
It was a sad day....
P.s. The lesson learned here is buy a case immediately after buying a new phone.
Sent from my DROID RAZR using XDA
By the way I bought the commuter case for the Maxx and its awesome! I highly recommend it.
Sent from my DROID RAZR using XDA
hasbrobot said:
By the way I bought the commuter case for the Maxx and its awesome! I highly recommend it.
Sent from my DROID RAZR using XDA
Click to expand...
Click to collapse
I love my commuter case,as I keep my phone in my pocket, but for an EMT I would recommend the Defender case as it can be placed in the belt clip screen first creating a full "shell" around the phone saving the screen from those falls described by others above, the commuter looks like it would save the screen on falls onto flat surfaces, but give it some rocky conditions and I wouldn't expect it to.
Personally no case is more durable than seidio. Fit and finish. Snug. No looseness. I have seen countless otter box and trident cases and when I owned my evo, anyone that had a rugged case wanted that one. I actually would demo it by dropping it 3 feet directly on concrete. Many different times. I trusted it.
hasbrobot said:
Here's my EMS story, enjoy fellas.
Even EMT's have emergencies...
I still can't believe this happened so I thought I'd share my tale of woe with you guys. First off I just bought this phone and its the best Android phone I've had to date, its simply awesome! So here goes,I am an emergency medical technician an was on shift last night when it happened. Last night I was responding to an emergency at a stadium during a track meet,as we got closer I began to hear murmurs from the nearby crowd that it looks to be a cardiac related incident. So I don't normally recommend this but in this case the shortest distance between us and our patient was a small 5 foot high chain link fence. I decided it would be prudent to reach our apparently collapsed patient as soon as possible. So over I went,but during my steady yet determined climb over the fence to get to my patient something went bad. I heard as scary yet recognizable sound behind me. It was the all to familiar sound of something smacking the surface of the concrete. Something in me knew instantly what it was. As fear and hesitancy welled up inside of me,I turned my gaze if only to look for just a brief moment. It was then that my eyes fell upon my brand new,not 20 hours old razr maxxface first on the unforgiving pavement. It had apparently taken a dive at the apexof my climb. I quickly retrieved it, stuffed it into my pocket and went on with my business. It was only till after the emergency transpired that I removed it from my pocket to find that the screen was completely shattered! Something inside of me screamed and writhed in anguish,as the proverbial wave of disappointment settled over me.
So here I sit this morning preparing to fill out the claim affidavit to asurion. When all I keep thinking about is now i'm going to get stuck with a used phone in return,to bide me through the next 2 years of my recently renewed contact with Verizon.
It was a sad day....
P.s. The lesson learned here is buy a case immediately after buying a new phone.
Sent from my DROID RAZR using XDA
Click to expand...
Click to collapse
Don't fret. My screen cracked yesterday from a short fall. I had a simple gel case on it. Obviously not enough to protect it. Filled out the claim last night online, and received a brand new Razr Maxx this afternoon! - that's right... NEW! And in less than 24 hours! Based on a few comments/recommendations about my woes in the General Section "Gorilla Glass my A$$", I made sure to put an Otter Box Commuter on it as soon as it came out of the box.
Sent from my ICS HP Touchpad using XDA
I picked up an Otter Box commuter case right away too. Fantastic! Its light and makes the phone a little easier to hold. Got it for around $25 on amazon.
Sent from my DROID RAZR using xda premium
Side note if you paid more then like 35 bucks for an otterbox (defender or commuter) you overpaid and should return it and get your money back, then go to amazon and get one (I say this cause I saw someone say they paid 60 dollars for the defender case).
Just got my Maxx yesterday with the defender case (25% discount with corporate) and it really is a nice case. Really does a great job of protecting the phone. I also ordered the commuter from amazon for $22 plus shipping.
Sent from my Xoom using Tapatalk 2
GET THE TRIDENT AEGIS from ebay! i got mine fore $22 and its already saved me twice. Once i left the phone in my lap and as i got out of the car, the phone landed faceflat on the cement. NO DAMAGE! second it dropped out my hands right onto the corner. This case is the ****!
Ok, so this is my first thread on these forums. If I'm breaking the rules or posting incorrectly, etc. Please let me know how to fix it.
I went ahead and got all the measurements off of various sites before I attempted this. I lost the paper I wrote the dimensions on. But this does work. I used an exacto knife, old pair of wire cutters and a file. I wish I had a dremel to do this, It would've been a lot cleaner and more exact.
I ordered an OEM Thunderbolt Extended Battery, Otterbox Defender Case, and a Zagg Screen Protector. I've been using this setup for a month now and am very pleased.
I spent $65 total on amazon.com and zagg.com for everything.
I first laid the battery in the battery cover and scored the edges. I pushed through it on one corner than began to cut. I filed down the edges. I then laid the cover in the Otterbox case and scored the outline. Then I ran the exacto back and forth for quite a while until I got through on one edge, than began to cut.
Here are my results. I know the images aren't the best quality. I haven't bought a new camera since before I've had my first android.
I peeled a bit of the padding out of the back of the Otterbox case and put it on the battery just to see how much it would push out the silicon cover, not much.
Now I am going to double-side tape the left over rectangle of the battery cover to the battery and get some weather stripping and place it on top of that.
The Zagg and the Otterbox mate well at first, eventually they begin to separate around the edges, I used the spray between them that came with the Zagg shield. The Zagg stays in place though. I haven't noticed any dust or debris since it's started. So far over this month they've stayed together in the center. I don't mind it as I am pretty hard on my phones physically and usage wise. It's hard to tell when the screen is actually on.
If you have any questions that I haven't answered, just let me know.
Thanks for looking.
How well has this been working for you? I have been planning on doing the same thing.
Sent from my rooted slightly modified Rezound using XDA
That's really, really cool. I approve, great job!
I did something similar with my trident kraken case. I was going to get this otterbox but I didn't because trident has a better selection of colors and so far its been great.
Sent from my ADR6425LVW using xda premium
I saw on htcpedia that you can actually use the Defender case without the back plastic piece. Just wrap the silicone outer cover around the phone with just the front plastic on. Haven't tried it but their video shows that it seems to fit perfect.
Sent from my DROID3 using Tapatalk 2
The problem with doing that is the phone will not fit in the holster screen out and the volume buttons are way to sensitive. If you cut the otter box back and the standard battery door everything fits nearly prefect.
Sent from my rooted slightly modified Rezound using XDA
I believe that also voids your (lifetime) warranty. Commuter cases are better anyway, but that's just me..
*Sent...*
You should read the fine print. Its hardly a lifetime warranty. In fact is only for a year. And if you have a flaw within that year, they will only replace it once. Besides, how many things can really go wrong with a phone case? Once it breaks, your probably ready for a different one anyway.
Sent from my rooted slightly modified Rezound using XDA
Just did this last night....and I agree, would be much easier with a dremel. I'm going to borrow a friends to smooth the cuts, but so far, it works like a champ. I used an OEM Rezound extended battery though
Sent from my WabiSabiGeek'd out Transformer Prime using the Interweb
Thanks for the pics and info for this MOD I did it a few days ago and I love it you can't even tell that I added the extended battery. I picked up a battery from Verizon website on sale for 29.99 plus my 18% off. Worked out great.
Love the mod. I'm gonna do it my next day off. How solid does it feel? Does anything feel lose on the back? Also do you think this would work with the mugen 4000 mah battery?
sumredhed567 said:
Love the mod. I'm gonna do it my next day off. How solid does it feel? Does anything feel lose on the back? Also do you think this would work with the mugen 4000 mah battery?
Click to expand...
Click to collapse
Looks and fell you can't even tell you did the mod. I did nice clean cuts the battery cover was so close on my cuts a had to go back with sand paper as I was not getting cell service do to the antenna no connected. So take your time the OEM batt cover already has the outline of the battery so that cut is very easy. after that just lay the back cover in the outerbox and mark and cut you will be very happy with it.
I ended up doing it yesterday and I'm in love
. You really can't tell it's there. The only thing I'm wondering is the dimensions of the 4000 mah battery because I'm wondering if it will work with this mod. Can anyone chime in? Is it bigger then the OEM extended battery?
sumredhed567 said:
I ended up doing it yesterday and I'm in love
. You really can't tell it's there. The only thing I'm wondering is the dimensions of the 4000 mah battery because I'm wondering if it will work with this mod. Can anyone chime in? Is it bigger then the OEM extended battery?
Click to expand...
Click to collapse
Well the 4000 mah battery has to be the same around so even if it is thicker I think the outerbox rubber will still give in and pull over it just fine.
Today I did the same case mods.
I purchased a used standard rezound back piece for $5 + $4 for shipping. This way if I screw up I only lose the used back piece.
Well I did a good tight job on the back piece. It's like HTC already put cutting lines inside the back piece to make it easier for us. I used a dremel tool with cutoff wheel. Also used a file to smooth it out.
On the defender box I cut the rectangle a little too low and had to lengthen the hole. But I don't think it matters that the hole is 1/8 inch larger than necessary.
I am generally pleased, but I suspect this leaves the phone more vulnerable to water damage if it becomes submerged in liquid.
Sorry to everyone for not checking on this thread in such a long time. This has had a very solid feel. I love the rezound. Also, as for the 4000mah battery. I looked at the youtube video about it. It is a tad thicker than the OEM extended battery. But I see no reason why it wouldn't fit. The silicon will stretch. I'm actually looking into getting the 4500mah battery from mugen for the thunderbolt to see if that will work. I don't mind the added bulk, obviously haha. I also need to clean my case up with my dremel. I've just been lazy. I can take pics of this phone later to show how it's held up. The only other thing is it is hard to fit the phone in screen out in the belt clip if you want to use it as a stand. With any mugen, imho, it will not fit that way at all. But regular face in, no battery will affect that.
I'd be careful about handing all that cash to mugen. Their batteries are under 80 percent of the claims.
http://batteryboss.org/
slydweis said:
Sorry to everyone for not checking on this thread in such a long time. This has had a very solid feel. I love the rezound. Also, as for the 4000mah battery. I looked at the youtube video about it. It is a tad thicker than the OEM extended battery. But I see no reason why it wouldn't fit. The silicon will stretch. I'm actually looking into getting the 4500mah battery from mugen for the thunderbolt to see if that will work. I don't mind the added bulk, obviously haha. I also need to clean my case up with my dremel. I've just been lazy. I can take pics of this phone later to show how it's held up. The only other thing is it is hard to fit the phone in screen out in the belt clip if you want to use it as a stand. With any mugen, imho, it will not fit that way at all. But regular face in, no battery will affect that.
Click to expand...
Click to collapse
The OEM extended battery is pretty good and I got mine for $25. That's a pretty good deal.
HowardZ said:
I'd be careful about handing all that cash to mugen. Their batteries are under 80 percent of the claims.
http://batteryboss.org/
Click to expand...
Click to collapse
Wow, that is very interesting. If OEM is the closest to what they state, I may just solder my other incredible 2 batteries together haha.
I purchased a oneplus 6t a few weeks ago and am now looking for a case with a built in magnetic ring. I have a magnetic mount that I really like using and after my last flight I decided I really want something that can prop my phone up. Funny how little things made me change my mind about the screen size and having a kickstand of sorts. Anyways, I've been looking on Amazon and all the cases I see look like clones of each other and the ones that people review on mention how it is flimsy, provides poor protection and the ring breaks after 4 days. Also the text, auto focus and ultimate experience really turn me off on getting the case.
Currently I'm using the case that came with the phone and I put a ailun magnetic keyring in the back but the bump is starting to annoying me when I place the phone down. Any suggestions?
https://www.aliexpress.com/item/Nil...ll-Back-Cover-for-OnePlus-6T/32890232367.html
I ordered the one you're talking about. Comes in next week. I'll try and remind myself to post back to here with my results.
jmsdvs said:
I ordered the one you're talking about. Comes in next week. I'll try and remind myself to post back to here with my results.
Click to expand...
Click to collapse
Yes, I also ordered that same one from Nillkin through Giztop last week or so .along with their H+Pro screen protector. Hopefully, it will be worth the wait if it ever gets here that is.I will be sure to post my opinions once I get it.
Hope you guys aren't disappointed when you get them. I was looking at possibly getting them, but noticed the case is for the OP6, not 6T. And if you look at the title/description, it says 6, and later 6T, very inconsistently.
https://www.ebay.com/itm/Nillkin-Sy...sh=item260afcf8ca:g:io8AAOSw5wFb-KiG&LH_BIN=1
I ordered my case from ebay, has not arrived yet but the seller is trusted. I have purchased all my cases from the same buyer, takes 2 weeks to get in Finland. And this one is for the 6T, not the 6.
The same casemodel for LG G6 was total rubbish, very flimsy and cheap. But if the pictures are right, this one is totally different. I guess it depend from the shape and size of the phone.
Ok, I've had it on for a couple days now. I actually like it. I can see how it may not provide much protection to glass as the edges are pretty even with the glass. I used to have Loopy case and this is pretty similar. The ring on the back appears to be taped on with 3m tape, but pretty sturdy nonetheless. Works on my magnetic mounts as well. For the price, I say it was worth it for now. The oem case went over the glass too much making the edge difficult to access. Gonna stick with this case.